Mercurial > public > ostc4
annotate Small_CPU/Src/rtc.c @ 408:2fc08a0d1ec3 Improment_NVM
Bugfix invalid voltage / temperatur after coldstart:
In case of a cold start (complete power on / off) the RTE could send devie data before values like voltage or temperature have been measured for the first time. As result the device history data was set to it limits causing a minimal voltage of 2V to be displayed in history memory.
Workaround for voltage is to initialize it to 6V at startup but for temperature a default value having no impact to the history memory is not possible
| author | ideenmodellierer |
|---|---|
| date | Sun, 12 Jan 2020 19:50:14 +0100 |
| parents | f0069f002c55 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file rtc.c | |
| 4 * @author heinrichs weikamp gmbh | |
| 5 * @version V0.0.1 | |
| 6 * @date 10-Oct-2014 | |
| 7 * @brief Source code for rtc control | |
| 8 * | |
| 9 @verbatim | |
| 10 ============================================================================== | |
| 11 ##### How to use ##### | |
| 12 ============================================================================== | |
| 13 @endverbatim | |
| 14 ****************************************************************************** | |
| 15 * @attention | |
| 16 * | |
| 17 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
| 18 * | |
| 19 ****************************************************************************** | |
| 20 */ | |
| 21 /* Includes ------------------------------------------------------------------*/ | |
| 22 #include "rtc.h" | |
| 23 #include "stm32f4xx_hal.h" | |
| 24 #include "stm32f4xx_hal_conf.h" | |
| 25 #include "baseCPU2.h" | |
| 26 | |
| 27 RTC_HandleTypeDef RTCHandle; | |
| 28 | |
| 29 static void RTC_Error_Handler(void); | |
| 30 | |
| 31 | |
| 32 void RTC_SetTime(RTC_TimeTypeDef stimestructure) | |
| 33 { | |
| 34 | |
| 35 stimestructure.SubSeconds = 0; | |
|
232
f0069f002c55
Bugfix: make date/time setting work over reboots
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
36 stimestructure.TimeFormat = RTC_HOURFORMAT_24; |
| 38 | 37 stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; |
| 38 stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; | |
| 39 | |
| 40 if(HAL_RTC_SetTime(&RTCHandle, &stimestructure, FORMAT_BIN) != HAL_OK) | |
| 41 { | |
| 42 RTC_Error_Handler(); | |
| 43 } | |
| 44 } | |
| 45 | |
| 46 | |
| 47 void RTC_SetDate(RTC_DateTypeDef sdatestructure) | |
| 48 { | |
| 49 if(HAL_RTC_SetDate(&RTCHandle, &sdatestructure, FORMAT_BIN) != HAL_OK) | |
| 50 { | |
| 51 RTC_Error_Handler(); | |
| 52 } | |
| 53 } | |
| 54 | |
| 55 | |
| 56 /* | |
| 57 static void RTC_CalendarConfig(void) | |
| 58 { | |
| 59 RTC_DateTypeDef sdatestructure; | |
| 60 RTC_TimeTypeDef stimestructure; | |
| 61 | |
| 62 //##-1- Configure the Date ################################################# | |
| 63 // Set Date: Monday April 14th 2014 | |
| 64 sdatestructure.Year = 0; | |
| 65 sdatestructure.Month = RTC_MONTH_JANUARY; | |
| 66 sdatestructure.Date = 1; | |
| 67 sdatestructure.WeekDay = RTC_WEEKDAY_MONDAY; | |
| 68 | |
| 69 if(HAL_RTC_SetDate(&RTCHandle,&sdatestructure,FORMAT_BCD) != HAL_OK) | |
| 70 { | |
| 71 RTC_Error_Handler(); | |
| 72 } | |
| 73 | |
| 74 //##-2- Configure the Time ################################################# | |
| 75 // Set Time: 02:00:00 | |
| 76 stimestructure.Hours = 0; | |
| 77 stimestructure.Minutes = 0; | |
| 78 stimestructure.Seconds = 0; | |
| 79 stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; | |
| 80 stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; | |
| 81 | |
| 82 if(HAL_RTC_SetTime(&RTCHandle,&stimestructure,FORMAT_BCD) != HAL_OK) | |
| 83 { | |
| 84 RTC_Error_Handler(); | |
| 85 } | |
| 86 | |
| 87 //##-3- Writes a data in a RTC Backup data Register0 ####################### | |
| 88 // HAL_RTCEx_BKUPWrite(&RTCHandle,RTC_BKP_DR0,0x32F2); | |
| 89 } | |
| 90 */ | |
| 91 | |
| 92 | |
| 93 /* ##-1- Configure the RTC peripheral ####################################### | |
| 94 Configure RTC prescaler and RTC data registers | |
| 95 RTC configured as follow: | |
| 96 - Hour Format = Format 24 | |
| 97 - Asynch Prediv = Value according to source clock | |
| 98 - Synch Prediv = Value according to source clock | |
| 99 - OutPut = Output Disable | |
| 100 - OutPutPolarity = High Polarity | |
| 101 - OutPutType = Open Drain | |
| 102 */ | |
| 103 | |
| 104 | |
| 105 void MX_RTC_init(void) | |
| 106 { | |
|
232
f0069f002c55
Bugfix: make date/time setting work over reboots
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
107 /* Initialize RTC */ |
| 38 | 108 RTCHandle.Instance = RTC; |
| 109 RTCHandle.Init.HourFormat = RTC_HOURFORMAT_24; | |
| 110 RTCHandle.Init.AsynchPrediv = 127; | |
| 111 RTCHandle.Init.SynchPrediv = 255; | |
| 112 RTCHandle.Init.OutPut = RTC_OUTPUT_DISABLE; | |
| 113 RTCHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; | |
| 114 RTCHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; | |
| 115 HAL_RTC_Init(&RTCHandle); | |
| 116 } | |
| 117 | |
| 118 | |
| 119 void RTC_StopMode_2seconds(void) | |
| 120 { | |
| 121 /* Enable Power Control clock */ | |
| 122 __HAL_RCC_PWR_CLK_ENABLE(); | |
| 123 | |
| 124 /* Disable Wake-up timer */ | |
| 125 HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); | |
| 126 | |
| 127 /* Enable Wake-up timer */ | |
| 128 HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x1000-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); | |
| 129 | |
| 130 /* FLASH Deep Power Down Mode enabled */ | |
| 131 HAL_PWREx_EnableFlashPowerDown(); | |
| 132 | |
| 133 /*## Enter Stop Mode #######################################################*/ | |
| 134 HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI); | |
| 135 | |
| 136 /* Configures system clock after wake-up from STOP: enable HSI, PLL and select | |
| 137 PLL as system clock source (HSI and PLL are disabled in STOP mode) */ | |
| 138 SYSCLKConfig_STOP(); | |
| 139 | |
| 140 HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); | |
| 141 } | |
| 142 | |
| 143 | |
| 144 void RTC_Stop_11ms(void) | |
| 145 { | |
| 146 /* Disable Wake-up timer */ | |
| 147 HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); | |
| 148 | |
| 149 /* Enable Wake-up timer */ | |
| 150 HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x18-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); | |
| 151 | |
| 152 /* FLASH Deep Power Down Mode enabled */ | |
| 153 HAL_PWREx_DisableFlashPowerDown(); | |
| 154 | |
| 155 /*## Enter Stop Mode #######################################################*/ | |
| 156 HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI); | |
| 157 | |
| 158 /* Configures system clock after wake-up from STOP: enable HSI, PLL and select | |
| 159 PLL as system clock source (HSI and PLL are disabled in STOP mode) */ | |
| 160 SYSCLKConfig_STOP(); | |
| 161 | |
| 162 HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); | |
| 163 } | |
| 164 | |
| 165 | |
| 166 static void RTC_Error_Handler(void) | |
| 167 { | |
| 168 while(1); | |
| 169 } | |
| 170 | |
| 171 | |
| 172 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |