Mercurial > public > ostc4
annotate Discovery/Src/externLogbookFlash.c @ 460:2effe85f1a9b minor_improvments
merged default into minor_improvments
| author | Ideenmodellierer |
|---|---|
| date | Sun, 29 Mar 2020 21:55:00 +0200 |
| parents | 7ac0e76dbd6a 9a9e4908ce2e |
| children | e4f6afd9c96b |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file externLogbookFlash.c | |
| 5 * @author heinrichs weikamp gmbh | |
| 6 * @date 07-Aug-2014 | |
| 7 * @version V0.0.4 | |
| 8 * @since 29-Sept-2015 | |
| 9 * @brief Main File to access the new 1.8 Volt Spansion S25FS256S 256 Mbit (32 Mbyte) | |
| 10 * @bug | |
| 11 * @warning | |
| 12 * | |
| 13 @verbatim | |
| 14 ============================================================================== | |
| 15 ##### Logbook Header (TOC) ##### | |
| 16 ============================================================================== | |
| 17 [..] Memory useage: | |
| 18 NEW: Spansion S25FS-S256S | |
| 19 | |
| 20 only 8x 4KB and 1x 32KB, remaining is 64KB or 256KB | |
| 21 Sector Size (kbyte) Sector Count Sector Range Address Range (Byte Address) Notes | |
| 22 4 8 SA00 00000000h-00000FFFh | |
| 23 : : | |
| 24 SA07 00007000h-00007FFFh | |
| 25 | |
| 26 32 1 SA08 00008000h-0000FFFFh | |
| 27 | |
| 28 64 511 SA09 00010000h-0001FFFFh | |
| 29 : : | |
| 30 SA519 01FF0000h-01FFFFFFh | |
| 31 OLD: | |
| 32 1kB each header | |
| 33 with predive header at beginning | |
| 34 and postdive header with 0x400 HEADER2OFFSET | |
| 35 4kB (one erase) has two dives with 4 headers total | |
| 36 total of 512 kB (with 256 header ids (8 bit)) | |
| 37 Size is 280 Byte (as of 25.Nov. 2014) | |
| 38 | |
| 39 [..] Output to PC / UART is postdive header | |
| 40 | |
| 41 [..] Block Protection Lock-Down is to erase logbook only | |
| 42 | |
| 43 [..] Timing (see page 137 of LOGBOOK_V3_S25FS-S_00-271247.pdf | |
| 44 bulk erase is 2 minutes typ., 6 minutes max. | |
| 45 | |
| 46 ============================================================================== | |
| 47 ##### DEMOMODE ##### | |
| 48 ============================================================================== | |
| 49 151215: ext_flash_write_settings() is DISABLED! | |
| 50 | |
| 51 ============================================================================== | |
| 52 ##### bug fixes ##### | |
| 53 ============================================================================== | |
| 54 150917: end in header and length of sample was one byte too long | |
| 55 as stated by Jef Driesen email 15.09.2015 | |
| 56 | |
| 57 @endverbatim | |
| 58 ****************************************************************************** | |
| 59 * @attention | |
| 60 * | |
| 61 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
| 62 * | |
| 63 ****************************************************************************** | |
| 64 */ | |
| 65 | |
| 66 /* Includes ------------------------------------------------------------------*/ | |
| 67 #include "stm32f4xx_hal.h" | |
| 68 #include "externLogbookFlash.h" | |
| 69 #include "ostc.h" | |
| 70 #include "settings.h" | |
| 71 #include "gfx_engine.h" | |
| 72 | |
| 73 #ifndef BOOTLOADER_STANDALONE | |
| 74 #include "logbook.h" | |
| 75 #endif | |
| 76 | |
| 77 /* Private types -------------------------------------------------------------*/ | |
| 78 #define FLASHSTART 0x000000 | |
| 79 //#define FLASHSTOP 0x01FFFFFF all 32 MB with 4byte addressing | |
| 80 #define FLASHSTOP 0x00FFFFFF | |
| 81 //#define FLASHSTOP 0x3FFFFF | |
| 82 #define RELEASE 1 | |
| 83 #define HOLDCS 0 | |
| 84 | |
| 85 #define HEADER2OFFSET 0x400 | |
| 86 | |
| 87 typedef enum{ | |
| 88 EF_HEADER, | |
| 89 EF_SAMPLE, | |
| 90 EF_DEVICEDATA, | |
| 91 EF_VPMDATA, | |
| 92 EF_SETTINGS, | |
| 93 EF_FIRMWARE, | |
| 94 EF_FIRMWARE2, | |
| 95 }which_ring_enum; | |
| 96 | |
| 97 | |
| 98 typedef struct{ | |
| 99 uint8_t IsBusy:1; | |
| 100 uint8_t IsWriteEnabled:1; | |
| 101 uint8_t BlockProtect0:1; | |
| 102 uint8_t BlockProtect1:1; | |
| 103 uint8_t BlockProtect2:1; | |
| 104 uint8_t BlockProtect3:1; | |
| 105 uint8_t IsAutoAddressIncMode:1; | |
| 106 uint8_t BlockProtectL:1; | |
| 107 } extFlashStatusUbit8_t; | |
| 108 | |
| 109 typedef union{ | |
| 110 extFlashStatusUbit8_t ub; | |
| 111 uint8_t uw; | |
| 112 } extFlashStatusBit8_Type; | |
| 113 | |
| 114 | |
| 115 /* Exported variables --------------------------------------------------------*/ | |
| 116 | |
| 117 /* Private variables ---------------------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
118 static uint32_t actualAddress = 0; |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
119 static uint32_t preparedPageAddress = 0; |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
120 static uint32_t closeSectorAddress = 0; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
121 static uint32_t entryPoint = 0; |
| 38 | 122 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
123 static uint32_t actualPointerHeader = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
124 static uint32_t actualPointerSample = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
125 static uint32_t LengthLeftSampleRead = 0; |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
126 static uint32_t actualPointerDevicedata = DDSTART; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
127 static uint32_t actualPointerDevicedata_Read = DDSTART; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
128 static uint32_t actualPointerVPM = 0; |
| 427 | 129 static uint32_t actualPointerSettings = SETTINGSSTART; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
130 static uint32_t actualPointerFirmware = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
131 static uint32_t actualPointerFirmware2 = 0; |
| 38 | 132 |
| 133 /* Private function prototypes -----------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
134 static void chip_unselect(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
135 static void chip_select(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
136 static void error_led_on(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
137 static void error_led_off(void); |
| 38 | 138 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
139 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
140 static uint8_t read_spi(uint8_t unselect_CS_afterwards); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
141 static void write_address(uint8_t unselect_CS_afterwards); |
| 38 | 142 static void Error_Handler_extflash(void); |
| 143 static void wait_chip_not_busy(void); | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
144 static void ext_flash_incf_address(uint8_t type); |
| 38 | 145 //void ext_flash_incf_address_ring(void); |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
146 static void ext_flash_decf_address_ring(uint8_t type); |
| 38 | 147 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
148 static void ext_flash_erase4kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
149 static void ext_flash_erase32kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
150 static void ext_flash_erase64kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
151 static uint8_t ext_flash_erase_if_on_page_start(void); |
| 38 | 152 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
153 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase); |
| 38 | 154 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
155 static void ext_flash_read_block(uint8_t *getByte, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
156 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
157 static void ext_flash_read_block_stop(void); |
| 38 | 158 |
| 159 static void ef_hw_rough_delay_us(uint32_t delayUs); | |
| 160 static void ef_erase_64K(uint32_t blocks); | |
| 161 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
162 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
163 |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
164 static void ext_flash_disable_protection(void); |
| 38 | 165 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
166 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
167 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
168 static void ext_flash_find_start(void); |
| 38 | 169 |
| 170 | |
| 171 /* Exported functions --------------------------------------------------------*/ | |
| 172 | |
| 173 void ext_flash_write_firmware(uint8_t *pSample1, uint32_t length1)//, uint8_t *pSample2, uint32_t length2) | |
| 174 { | |
| 175 general32to8_Type lengthTransform; | |
| 176 | |
| 177 lengthTransform.u32 = length1; | |
| 178 | |
| 179 actualPointerFirmware = FWSTART; | |
| 180 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE, 1); | |
| 181 ef_write_block(pSample1,length1, EF_FIRMWARE, 1); | |
| 182 | |
| 183 // if(length2) | |
| 184 // ef_write_block(pSample2,length2, EF_FIRMWARE, 1); | |
| 185 } | |
| 186 | |
| 187 uint8_t ext_flash_read_firmware_version(char *text) | |
| 188 { | |
| 189 uint32_t backup = actualAddress; | |
| 190 uint8_t buffer[4]; | |
| 191 | |
| 192 // + 4 for length data, see ext_flash_write_firmware | |
| 193 actualAddress = FWSTART + 4 + 0x10000; | |
| 194 ext_flash_read_block_start(); | |
| 195 ext_flash_read_block(&buffer[0], EF_FIRMWARE); | |
| 196 ext_flash_read_block(&buffer[1], EF_FIRMWARE); | |
| 197 ext_flash_read_block(&buffer[2], EF_FIRMWARE); | |
| 198 ext_flash_read_block(&buffer[3], EF_FIRMWARE); | |
| 199 | |
| 200 ext_flash_read_block_stop(); | |
| 201 actualAddress = backup; | |
| 202 | |
| 203 uint8_t ptr = 0; | |
| 204 text[ptr++] = 'V'; | |
| 205 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[0] & 0x3F); | |
| 206 text[ptr++] = '.'; | |
| 207 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[1] & 0x3F); | |
| 208 text[ptr++] = '.'; | |
| 209 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[2] & 0x3F); | |
| 210 text[ptr++] = ' '; | |
| 211 if(buffer[3]) | |
| 212 { | |
| 213 text[ptr++] = 'b'; | |
| 214 text[ptr++] = 'e'; | |
| 215 text[ptr++] = 't'; | |
| 216 text[ptr++] = 'a'; | |
| 217 text[ptr++] = ' '; | |
| 218 } | |
| 219 return ptr; | |
| 220 } | |
| 221 | |
| 222 | |
| 223 uint32_t ext_flash_read_firmware(uint8_t *pSample1, uint32_t max_length, uint8_t *magicByte) | |
| 224 { | |
| 225 uint32_t backup = actualAddress; | |
| 226 general32to8_Type lengthTransform; | |
| 227 | |
| 228 actualAddress = FWSTART; | |
| 229 ext_flash_read_block_start(); | |
| 230 | |
| 231 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE); | |
| 232 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE); | |
| 233 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE); | |
| 234 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE); | |
| 235 | |
| 236 | |
| 237 if(lengthTransform.u32 == 0xFFFFFFFF) | |
| 238 { | |
| 239 lengthTransform.u32 = 0xFFFFFFFF; | |
| 240 } | |
| 241 else | |
| 242 if(lengthTransform.u32 > max_length) | |
| 243 { | |
| 244 lengthTransform.u32 = 0xFF000000; | |
| 245 } | |
| 246 else | |
| 247 { | |
| 248 for(uint32_t i = 0; i<lengthTransform.u32; i++) | |
| 249 { | |
| 250 ext_flash_read_block(&pSample1[i], EF_FIRMWARE); | |
| 251 } | |
| 252 | |
| 253 } | |
| 254 | |
| 255 ext_flash_read_block_stop(); | |
| 256 | |
| 257 if(magicByte) | |
| 258 { | |
| 259 *magicByte = pSample1[0x10000 + 0x3E]; // 0x3E == 62 | |
| 260 } | |
| 261 | |
| 262 actualAddress = backup; | |
| 263 return lengthTransform.u32; | |
| 264 } | |
| 265 | |
| 266 | |
| 267 void ext_flash_write_firmware2(uint32_t offset, uint8_t *pSample1, uint32_t length1, uint8_t *pSample2, uint32_t length2) | |
| 268 { | |
| 269 general32to8_Type lengthTransform, offsetTransform; | |
| 270 | |
| 271 lengthTransform.u32 = length1 + length2; | |
| 272 offsetTransform.u32 = offset; | |
| 273 | |
| 274 actualPointerFirmware2 = FWSTART2; | |
| 275 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE2, 1); | |
| 276 ef_write_block(offsetTransform.u8,4, EF_FIRMWARE2, 1); | |
| 277 ef_write_block(pSample1,length1, EF_FIRMWARE2, 1); | |
| 278 if(length2) | |
| 279 ef_write_block(pSample2,length2, EF_FIRMWARE2, 1); | |
| 280 } | |
| 281 | |
| 282 | |
| 283 uint32_t ext_flash_read_firmware2(uint32_t *offset, uint8_t *pSample1, uint32_t max_length1, uint8_t *pSample2, uint32_t max_length2) | |
| 284 { | |
| 285 uint32_t backup = actualAddress; | |
| 286 uint32_t length1, length2; | |
| 287 general32to8_Type lengthTransform, offsetTransform; | |
| 288 | |
| 289 actualAddress = FWSTART2; | |
| 290 ext_flash_read_block_start(); | |
| 291 | |
| 292 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE2); | |
| 293 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE2); | |
| 294 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE2); | |
| 295 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE2); | |
| 296 | |
| 297 ext_flash_read_block(&offsetTransform.u8[0], EF_FIRMWARE2); | |
| 298 ext_flash_read_block(&offsetTransform.u8[1], EF_FIRMWARE2); | |
| 299 ext_flash_read_block(&offsetTransform.u8[2], EF_FIRMWARE2); | |
| 300 ext_flash_read_block(&offsetTransform.u8[3], EF_FIRMWARE2); | |
| 301 | |
| 302 *offset = offsetTransform.u32; | |
| 303 | |
| 304 if(lengthTransform.u32 == 0xFFFFFFFF) | |
| 305 { | |
| 306 lengthTransform.u32 = 0xFFFFFFFF; | |
| 307 } | |
| 308 else | |
| 309 if(lengthTransform.u32 > max_length1 + max_length2) | |
| 310 { | |
| 311 lengthTransform.u32 = 0xFF000000; | |
| 312 } | |
| 313 else | |
| 314 { | |
| 315 if(lengthTransform.u32 < max_length1) | |
| 316 { | |
| 317 length1 = lengthTransform.u32; | |
| 318 length2 = 0; | |
| 319 } | |
| 320 else | |
| 321 { | |
| 322 length1 = max_length1; | |
| 323 length2 = lengthTransform.u32 - max_length1; | |
| 324 } | |
| 325 | |
| 326 if(pSample1) | |
| 327 { | |
| 328 for(uint32_t i = 0; i<length1; i++) | |
| 329 { | |
| 330 ext_flash_read_block(&pSample1[i], EF_FIRMWARE2); | |
| 331 } | |
| 332 if(pSample2) | |
| 333 { | |
| 334 for(uint32_t i = 0; i<length2; i++) | |
| 335 { | |
| 336 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
| 337 } | |
| 338 } | |
| 339 } | |
| 340 else if(pSample2) | |
| 341 { | |
| 342 actualAddress += length1; | |
| 343 for(uint32_t i = 0; i<length2; i++) | |
| 344 { | |
| 345 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
| 346 } | |
| 347 } | |
| 348 } | |
| 349 ext_flash_read_block_stop(); | |
| 350 actualAddress = backup; | |
| 351 return lengthTransform.u32; | |
| 352 } | |
| 353 | |
| 354 | |
| 355 void ext_flash_read_fixed_16_devicedata_blocks_formated_128byte_total(uint8_t *buffer) | |
| 356 { | |
| 357 SDeviceLine data[16]; | |
| 358 uint8_t tempLengthIngnore; | |
| 359 uint16_t count; | |
| 360 uint8_t transfer; | |
| 361 | |
| 362 RTC_DateTypeDef Sdate; | |
| 363 RTC_TimeTypeDef Stime; | |
| 364 | |
| 365 actualAddress = DDSTART; | |
| 366 | |
| 367 ext_flash_read_block_start(); | |
| 368 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
| 369 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
| 370 | |
| 371 ext_flash_read_block_multi((uint8_t *)data,16*3*4, EF_DEVICEDATA); | |
| 372 ext_flash_read_block_stop(); | |
| 373 | |
| 374 count = 0; | |
| 375 for(int i=0;i<16;i++) | |
| 376 { | |
| 377 transfer = (data[i].value_int32 >> 24) & 0xFF; | |
| 378 buffer[count++] = transfer; | |
| 379 transfer = (data[i].value_int32 >> 16) & 0xFF; | |
| 380 buffer[count++] = transfer; | |
| 381 transfer = (data[i].value_int32 >> 8) & 0xFF; | |
| 382 buffer[count++] = transfer; | |
| 383 transfer = (data[i].value_int32) & 0xFF; | |
| 384 buffer[count++] = transfer; | |
| 385 | |
| 386 translateDate(data[i].date_rtc_dr, &Sdate); | |
| 387 translateTime(data[i].time_rtc_tr, &Stime); | |
| 388 buffer[count++] = Sdate.Year; | |
| 389 buffer[count++] = Sdate.Month; | |
| 390 buffer[count++] = Sdate.Date; | |
| 391 buffer[count++] = Stime.Hours; | |
| 392 } | |
| 393 } | |
| 394 | |
| 395 | |
| 396 #ifndef BOOTLOADER_STANDALONE | |
| 397 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
398 void ext_flash_write_devicedata(uint8_t resetRing) |
| 38 | 399 { |
| 400 uint8_t *pData; | |
| 401 const uint16_t length = sizeof(SDevice); | |
| 402 uint8_t length_lo, length_hi; | |
| 403 uint8_t dataLength[2] = { 0 }; | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
404 uint32_t tmpBlockStart; |
| 38 | 405 |
| 406 ext_flash_disable_protection(); | |
| 407 | |
| 408 pData = (uint8_t *)stateDeviceGetPointer(); | |
| 409 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
410 /* Reset the Ring to the start address if requested (e.g. because we write the default block during shutdown) */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
411 if((resetRing) || ((actualPointerDevicedata + length) >= DDSTOP)) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
412 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
413 actualPointerDevicedata = DDSTART; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
414 } |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
415 tmpBlockStart = actualPointerDevicedata; |
| 38 | 416 |
| 417 length_lo = (uint8_t)(length & 0xFF); | |
| 418 length_hi = (uint8_t)(length >> 8); | |
| 419 dataLength[0] = length_lo; | |
| 420 dataLength[1] = length_hi; | |
| 421 | |
| 422 ef_write_block(dataLength,2, EF_DEVICEDATA, 0); | |
| 423 ef_write_block(pData,length, EF_DEVICEDATA, 0); | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
424 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
425 actualPointerDevicedata_Read = tmpBlockStart; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
426 |
| 38 | 427 } |
| 428 | |
| 429 | |
| 430 uint16_t ext_flash_read_devicedata(uint8_t *buffer, uint16_t max_length) | |
| 431 { | |
| 432 uint16_t length; | |
| 433 uint8_t length_lo, length_hi; | |
| 434 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
435 actualAddress = actualPointerDevicedata_Read; |
| 38 | 436 |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
437 length = 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
438 length_lo = 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
439 length_hi = 0; |
| 38 | 440 ext_flash_read_block_start(); |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
441 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
442 |
| 38 | 443 ext_flash_read_block(&length_lo, EF_DEVICEDATA); |
| 444 ext_flash_read_block(&length_hi, EF_DEVICEDATA); | |
| 445 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
446 while ((length_lo != 0xFF) && (length_hi != 0xFF)) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
447 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
448 length = (length_hi * 256) + length_lo; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
449 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
450 if(length > max_length) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
451 return 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
452 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
453 ext_flash_read_block_multi(buffer,length,EF_DEVICEDATA); |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
454 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
455 ext_flash_read_block(&length_lo, EF_DEVICEDATA); /* check if another devicedata set is available */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
456 ext_flash_read_block(&length_hi, EF_DEVICEDATA); /* length will be 0xFFFF if a empty memory is read */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
457 } |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
458 ext_flash_decf_address_ring(EF_DEVICEDATA); /* set pointer back to empty address */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
459 ext_flash_decf_address_ring(EF_DEVICEDATA); |
| 38 | 460 ext_flash_read_block_stop(); |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
461 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
462 if(actualAddress > actualPointerDevicedata) /* the write pointer has not yet been set up probably */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
463 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
464 actualPointerDevicedata = actualAddress; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
465 } |
| 38 | 466 return length; |
| 467 } | |
| 468 | |
| 469 | |
| 470 void ext_flash_write_vpm(SVpm *vpmInput) | |
| 471 { | |
| 472 uint8_t *pData; | |
| 473 const uint16_t length = sizeof(SVpm); | |
| 474 | |
| 475 uint8_t length_lo, length_hi; | |
| 476 uint8_t dataLength[2] = { 0 }; | |
| 477 | |
| 478 pData = (uint8_t *)vpmInput; | |
| 479 | |
| 480 actualPointerVPM = VPMSTART; | |
| 481 | |
| 482 length_lo = (uint8_t)(length & 0xFF); | |
| 483 length_hi = (uint8_t)(length >> 8); | |
| 484 dataLength[0] = length_lo; | |
| 485 dataLength[1] = length_hi; | |
| 486 | |
| 487 ef_write_block(dataLength,2, EF_VPMDATA, 0); | |
| 488 ef_write_block(pData,length, EF_VPMDATA, 0); | |
| 489 } | |
| 490 | |
| 491 | |
| 492 int ext_flash_read_vpm(SVpm *vpmOutput) | |
| 493 { | |
| 494 uint8_t *pData; | |
| 495 const uint16_t length = sizeof(SVpm); | |
| 496 uint8_t length_lo, length_hi; | |
| 497 int output; | |
| 498 | |
| 499 actualAddress = VPMSTART; | |
| 500 | |
| 501 ext_flash_read_block_start(); | |
| 502 ext_flash_read_block(&length_lo, EF_VPMDATA); | |
| 503 ext_flash_read_block(&length_hi, EF_VPMDATA); | |
| 504 if((length_lo == (uint8_t)(length & 0xFF)) | |
| 505 &&(length_hi == (uint8_t)(length >> 8))) | |
| 506 { | |
| 507 pData = (uint8_t *)vpmOutput; | |
| 508 for(uint16_t i = 0; i < length; i++) | |
| 509 ext_flash_read_block(&pData[i], EF_VPMDATA); | |
| 510 output = length; | |
| 511 } | |
| 512 else | |
| 513 output = 0; | |
| 514 | |
| 515 ext_flash_read_block_stop(); | |
| 516 return output; | |
| 517 } | |
| 518 | |
| 519 #ifdef DEMOMODE | |
| 520 void ext_flash_write_settings(void) | |
| 521 { | |
| 522 return; | |
| 523 } | |
| 524 #else | |
| 427 | 525 void ext_flash_write_settings(uint8_t resetRing) |
| 38 | 526 { |
| 527 uint8_t *pData; | |
| 528 const uint16_t length = sizeof(SSettings); | |
| 529 uint8_t length_lo, length_hi; | |
| 530 uint8_t dataLength[2] = { 0 }; | |
| 531 | |
| 532 ext_flash_disable_protection(); | |
| 533 | |
| 534 if(stateRealGetPointer()->lastKnownBatteryPercentage) | |
| 535 { | |
| 536 settingsGetPointer()->lastKnownBatteryPercentage = stateRealGetPointer()->lastKnownBatteryPercentage; | |
| 537 } | |
| 538 settingsGetPointer()->backup_localtime_rtc_tr = stateRealGetPointer()->lifeData.timeBinaryFormat; | |
| 539 settingsGetPointer()->backup_localtime_rtc_dr = stateRealGetPointer()->lifeData.dateBinaryFormat; | |
| 540 | |
| 541 pData = (uint8_t *)settingsGetPointer(); | |
| 542 | |
| 427 | 543 /* Reset the Ring to the start address if requested (e.g. because we write the default block during shutdown) */ |
| 544 if((resetRing) || ((actualPointerSettings + length) >= SETTINGSSTOP)) | |
| 545 { | |
| 546 actualPointerSettings = SETTINGSSTART; | |
| 547 } | |
| 38 | 548 |
| 549 length_lo = (uint8_t)(length & 0xFF); | |
| 550 length_hi = (uint8_t)(length >> 8); | |
| 551 dataLength[0] = length_lo; | |
| 552 dataLength[1] = length_hi; | |
| 553 | |
| 554 ef_write_block(dataLength,2, EF_SETTINGS, 0); | |
| 555 ef_write_block(pData,length, EF_SETTINGS, 0); | |
| 556 // ext_flash_enable_protection(); | |
| 557 } | |
| 558 #endif | |
| 559 | |
| 560 | |
| 561 /* CHANGES 150929 hw | |
| 562 * this now allows to read old settings too | |
| 563 * but make sure that everything is fixed in | |
| 564 * set_new_settings_missing_in_ext_flash | |
| 565 * new settings should be fine as they are added | |
| 566 * and loaded before calling this function | |
| 567 */ | |
| 568 uint8_t ext_flash_read_settings(void) | |
| 569 { | |
| 570 uint8_t returnValue = HAL_BUSY; | |
| 571 uint8_t *pData; | |
| 572 const uint16_t lengthStandardNow = sizeof(SSettings); | |
| 573 uint8_t length_lo, length_hi; | |
| 574 uint16_t lengthOnEEPROM; | |
| 575 uint32_t header; | |
| 576 SSettings *pSettings = settingsGetPointer(); | |
| 577 | |
| 578 actualAddress = SETTINGSSTART; | |
| 579 | |
| 580 ext_flash_read_block_start(); | |
| 581 ext_flash_read_block(&length_lo, EF_SETTINGS); | |
| 582 ext_flash_read_block(&length_hi, EF_SETTINGS); | |
| 583 | |
| 427 | 584 while ((length_lo != 0xFF) && (length_hi != 0xFF)) /* get the latest stored setting block */ |
| 38 | 585 { |
| 427 | 586 lengthOnEEPROM = length_hi * 256; |
| 587 lengthOnEEPROM += length_lo; | |
| 588 if(lengthOnEEPROM <= lengthStandardNow) | |
| 38 | 589 { |
| 427 | 590 ext_flash_read_block_multi(&header, 4, EF_SETTINGS); |
| 591 if((header <= pSettings->header) && (header >= pSettings->updateSettingsAllowedFromHeader)) | |
| 592 { | |
| 593 returnValue = HAL_OK; | |
| 594 pSettings->header = header; | |
| 595 pData = (uint8_t *)pSettings + 4; /* header */ | |
| 596 for(uint16_t i = 0; i < (lengthOnEEPROM-4); i++) | |
| 597 ext_flash_read_block(&pData[i], EF_SETTINGS); | |
| 598 } | |
| 599 else | |
| 600 { | |
| 601 returnValue = HAL_ERROR; | |
| 602 } | |
| 38 | 603 } |
| 427 | 604 ext_flash_read_block(&length_lo, EF_SETTINGS); |
| 605 ext_flash_read_block(&length_hi, EF_SETTINGS); | |
| 606 } | |
| 607 ext_flash_decf_address_ring(EF_SETTINGS); /* set pointer back to empty address */ | |
| 608 ext_flash_decf_address_ring(EF_SETTINGS); | |
| 609 ext_flash_read_block_stop(); | |
| 610 | |
| 611 if(actualAddress > actualPointerSettings) /* the write pointer has not yet been set up probably */ | |
| 612 { | |
| 613 actualPointerSettings = actualAddress; | |
| 38 | 614 } |
| 615 ext_flash_read_block_stop(); | |
| 616 return returnValue; | |
| 617 } | |
| 618 | |
| 619 | |
| 620 | |
| 621 | |
| 622 /* ext_flash_start_new_dive_log_and_set_actualPointerSample | |
| 623 * prepares the write sample pointer | |
| 624 * to be used by ext_flash_write_sample() | |
| 625 * to be set in the * pHeaderPreDive | |
| 626 * for write with ext_flash_create_new_dive_log() and ext_flash_close_new_dive_log() | |
| 627 */ | |
| 628 void ext_flash_start_new_dive_log_and_set_actualPointerSample(uint8_t *pHeaderPreDive) | |
| 629 { | |
| 630 convert_Type data; | |
| 631 SSettings *settings = settingsGetPointer(); | |
| 632 | |
| 633 /* new 5. Jan. 2015 */ | |
| 634 actualPointerSample = settings->logFlashNextSampleStartAddress; | |
| 635 | |
| 636 if(!ext_flash_test_remaining_space_of_page_empty(actualPointerSample, 4)) | |
| 637 ext_flash_set_to_begin_of_next_page(&actualPointerSample, EF_SAMPLE); | |
| 638 | |
| 639 if((actualPointerSample < SAMPLESTART) || (actualPointerSample > SAMPLESTOP)) | |
| 640 actualPointerSample = SAMPLESTART; | |
| 641 | |
| 642 data.u32bit = actualPointerSample; | |
| 643 pHeaderPreDive[2] = data.u8bit.byteLow; | |
| 644 pHeaderPreDive[3] = data.u8bit.byteMidLow; | |
| 645 pHeaderPreDive[4] = data.u8bit.byteMidHigh; | |
| 646 /* to start sample writing and header etc. pp. */ | |
| 647 ext_flash_disable_protection_for_logbook(); | |
| 648 } | |
| 649 | |
| 650 | |
| 651 /* ext_flash_create_new_dive_log | |
| 652 * uses the first header without HEADER2OFFSET | |
| 653 * for the header it is not important to be complete | |
| 654 * and can be reconstructed | |
| 655 * ext_flash_start_new_dive_log_and_set_actualPointerSample() | |
| 656 * has to be called before to set the actualPointerSample | |
| 657 * in the header | |
| 658 * the following func writes to header to the ext_flash | |
| 659 */ | |
| 660 void ext_flash_create_new_dive_log(uint8_t *pHeaderPreDive) | |
| 661 { | |
| 662 SSettings *settings; | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
663 uint8_t id; |
| 38 | 664 uint8_t header1, header2; |
| 665 | |
| 666 settings = settingsGetPointer(); | |
| 667 id = settings->lastDiveLogId; | |
| 668 | |
| 669 actualAddress = HEADERSTART + (0x800 * id); | |
| 670 ext_flash_read_block_start(); | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
671 ext_flash_read_block(&header1, EF_SAMPLE); /* the sample ring is increased instead of header... not sure if that is planned intention */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
672 ext_flash_read_block(&header2, EF_SAMPLE); /* does not matter because actual address is reset in write_block call */ |
| 38 | 673 ext_flash_read_block_stop(); |
| 674 | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
675 /* TODO Cleanup_Ref_2: The code below should not be necessary in case of a proper shutdown and startup */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
676 /* the implementation fixes an issue which might happen at Cleanup_Ref_1 (in case of more then 254 dives) */ |
| 38 | 677 if((header1 == 0xFA) && (header2 == 0xFA)) |
| 678 { | |
| 679 id += 1; /* 0-255, auto rollover */ | |
| 680 if(id & 1) | |
| 681 { | |
| 682 actualAddress = HEADERSTART + (0x800 * id); | |
| 683 ext_flash_read_block_start(); | |
| 684 ext_flash_read_block(&header1, EF_SAMPLE); | |
| 685 ext_flash_read_block(&header2, EF_SAMPLE); | |
| 686 ext_flash_read_block_stop(); | |
| 687 if((header1 == 0xFA) && (header2 == 0xFA)) | |
| 688 id += 1; | |
| 689 } | |
| 690 } | |
| 691 else | |
| 692 { | |
| 693 id = 0; | |
| 694 } | |
| 695 | |
| 696 settings->lastDiveLogId = id; | |
| 697 actualPointerHeader = HEADERSTART + (0x800 * id); | |
| 698 | |
| 699 if(pHeaderPreDive != 0) | |
| 700 ef_write_block(pHeaderPreDive,HEADERSIZE, EF_HEADER, 0); | |
| 701 } | |
| 702 | |
| 703 | |
| 704 void ext_flash_close_new_dive_log(uint8_t *pHeaderPostDive ) | |
| 705 { | |
| 706 SSettings * settings = settingsGetPointer(); | |
| 707 uint8_t id; | |
| 708 convert_Type startAddress; | |
| 709 convert_Type data; | |
| 710 uint32_t backup; | |
| 711 | |
| 712 uint8_t sampleData[3]; | |
| 713 actualAddress = actualPointerSample; | |
| 714 sampleData[0] = 0xFD; | |
| 715 sampleData[1] = 0xFD; | |
| 716 ext_flash_write_sample(sampleData, 2); | |
| 717 | |
| 718 /* end of sample data, pointing to the last sample 0xFD | |
| 719 */ | |
| 720 actualAddress = actualPointerSample; // change hw 17.09.2015 | |
| 721 ext_flash_decf_address_ring(EF_SAMPLE); // 17.09.2015: this decf actualAddress only!! | |
| 722 actualPointerSample = actualAddress; // change hw 17.09.2015 | |
| 723 data.u32bit = actualPointerSample; | |
| 724 | |
| 725 pHeaderPostDive[5] = data.u8bit.byteLow; | |
| 726 pHeaderPostDive[6] = data.u8bit.byteMidLow; | |
| 727 pHeaderPostDive[7] = data.u8bit.byteMidHigh; | |
| 728 | |
| 729 /* take data written before, calculate length and write | |
| 730 SLogbookHeader has different order: length (byte# 8,9,10) prior to profile version (byte# 11) | |
| 731 */ | |
| 732 startAddress.u8bit.byteLow = pHeaderPostDive[2]; | |
| 733 startAddress.u8bit.byteMidLow = pHeaderPostDive[3]; | |
| 734 startAddress.u8bit.byteMidHigh = pHeaderPostDive[4]; | |
| 735 startAddress.u8bit.byteHigh = 0; | |
| 736 | |
| 737 if(startAddress.u32bit < actualPointerSample) | |
| 738 data.u32bit = 1 + actualPointerSample - startAddress.u32bit; | |
| 739 else | |
| 740 data.u32bit = 2 + (actualPointerSample - SAMPLESTART) + (SAMPLESTOP - startAddress.u32bit); | |
| 741 | |
| 742 pHeaderPostDive[8] = data.u8bit.byteLow; | |
| 743 pHeaderPostDive[9] = data.u8bit.byteMidLow; | |
| 744 pHeaderPostDive[10] = data.u8bit.byteMidHigh; | |
| 745 | |
| 746 /* set id and write post-dive-header | |
| 747 */ | |
| 748 id = settings->lastDiveLogId; | |
| 749 actualPointerHeader = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 750 | |
| 751 ef_write_block(pHeaderPostDive,HEADERSIZE, EF_HEADER, 0); | |
| 752 | |
| 753 /* write length at beginning of sample | |
| 754 and write proper beginning for next dive to actualPointerSample | |
| 755 */ | |
| 756 backup = actualPointerSample; | |
| 757 actualPointerSample = startAddress.u32bit; // is still 0xFF | |
| 758 sampleData[0] = data.u8bit.byteLow; | |
| 759 sampleData[1] = data.u8bit.byteMidLow; | |
| 760 sampleData[2] = data.u8bit.byteMidHigh; | |
| 761 ext_flash_overwrite_sample_without_erase(sampleData, 3); | |
| 762 | |
| 763 actualAddress = backup; | |
| 764 ext_flash_incf_address(EF_SAMPLE); | |
| 765 actualPointerSample = actualAddress; | |
| 766 ext_flash_enable_protection(); | |
| 767 } | |
| 768 | |
| 769 | |
| 770 void ext_flash_write_sample(uint8_t *pSample, uint16_t length) | |
| 771 { | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
772 uint32_t actualAdressBackup = 0; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
773 |
| 38 | 774 ef_write_block(pSample,length, EF_SAMPLE, 0); |
| 775 | |
| 776 SSettings *settings = settingsGetPointer(); | |
| 777 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
778 |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
779 if(0xFFFF - (actualAddress & 0x0000FFFF) < 255) /* are we close to a sector border? */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
780 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
781 if (((actualAddress & 0x0000FFFF) != 0) && (preparedPageAddress == 0)) /* only prepare if not already at start of sector */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
782 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
783 actualAdressBackup = actualAddress; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
784 actualAddress = (actualAddress & 0xFFFF0000) + 0x00010000; /* Set to start of next 64k sector */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
785 if(actualAddress >= SAMPLESTOP) |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
786 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
787 actualAddress = SAMPLESTART; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
788 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
789 preparedPageAddress = actualAddress; |
|
459
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
790 ext_flash_invalidate_sample_index(preparedPageAddress); |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
791 ext_flash_erase64kB(); |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
792 actualAddress = actualAdressBackup; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
793 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
794 } |
| 38 | 795 } |
| 796 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
797 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length) |
| 38 | 798 { |
| 799 ef_write_block(pSample,length, EF_SAMPLE, 1); | |
| 800 } | |
| 801 | |
| 802 | |
| 803 uint8_t ext_flash_count_dive_headers(void) | |
| 804 { | |
| 805 uint8_t id = 0; | |
| 806 uint8_t counter = 0; | |
| 807 uint16_t headerStartData = 0x0000; | |
| 808 | |
| 809 id = settingsGetPointer()->lastDiveLogId; | |
| 810 | |
| 811 do | |
| 812 { | |
| 813 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 814 ext_flash_read_block_start(); | |
| 815 ext_flash_read_block_multi((uint8_t *)&headerStartData, 2, EF_HEADER); | |
| 816 ext_flash_read_block_stop(); | |
| 817 counter++; | |
| 818 id -=1; | |
| 819 } while((headerStartData == 0xFAFA) && (counter < 255)); | |
| 820 return (counter - 1); | |
| 821 } | |
| 822 | |
| 823 | |
| 824 void ext_flash_read_dive_header(uint8_t *pHeaderToFill, uint8_t StepBackwards) | |
| 825 { | |
| 826 SSettings *settings; | |
| 827 uint8_t id; | |
| 828 uint16_t i; | |
| 829 | |
| 830 settings = settingsGetPointer(); | |
| 831 id = settings->lastDiveLogId; | |
| 832 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 833 | |
| 834 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 835 ext_flash_read_block_start(); | |
| 836 for(i = 0; i < HEADERSIZE; i++) | |
| 837 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
| 838 ext_flash_read_block_stop(); | |
| 839 | |
| 840 } | |
| 841 | |
| 842 void ext_flash_read_dive_header2(uint8_t *pHeaderToFill, uint8_t id, _Bool bOffset) | |
| 843 { | |
| 844 | |
| 845 uint16_t i; | |
| 846 actualAddress = HEADERSTART + (0x800 * id) ; | |
| 847 | |
| 848 if(bOffset) | |
| 849 actualAddress += HEADER2OFFSET; | |
| 850 ext_flash_read_block_start(); | |
| 851 for(i = 0; i < HEADERSIZE; i++) | |
| 852 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
| 853 ext_flash_read_block_stop(); | |
| 854 } | |
| 855 | |
| 856 | |
| 857 uint32_t ext_flash_read_dive_raw_with_double_header_1K(uint8_t *data, uint32_t max_size, uint8_t StepBackwards) | |
| 858 { | |
| 859 if(max_size < 0x800) | |
| 860 return 0; | |
| 861 | |
| 862 uint8_t id; | |
| 863 convert_Type dataStart, dataEnd; | |
| 864 uint32_t LengthAll = 0; | |
| 865 | |
| 866 id = settingsGetPointer()->lastDiveLogId; | |
| 867 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 868 | |
| 869 // clear data | |
| 870 for(int i=0;i<0x800;i++) | |
| 871 data[i] = 0xFF; | |
| 872 | |
| 873 // copy primary/pre-dive | |
| 874 actualAddress = HEADERSTART + (0x800 * id); | |
| 875 ext_flash_read_block_start(); | |
| 876 for(int i = 0; i < HEADERSIZE; i++) | |
| 877 ext_flash_read_block(&data[i], EF_HEADER); | |
| 878 ext_flash_read_block_stop(); | |
| 879 | |
| 880 // copy main/secondary/post-dive | |
| 881 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 882 ext_flash_read_block_start(); | |
| 883 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 884 ext_flash_read_block(&data[i], EF_HEADER); | |
| 885 ext_flash_read_block_stop(); | |
| 886 | |
| 887 // data | |
| 888 | |
| 889 dataStart.u8bit.byteHigh = 0; | |
| 890 dataStart.u8bit.byteLow = data[0x402]; | |
| 891 dataStart.u8bit.byteMidLow = data[0x403]; | |
| 892 dataStart.u8bit.byteMidHigh = data[0x404]; | |
| 893 | |
| 894 dataEnd.u8bit.byteHigh = 0; | |
| 895 dataEnd.u8bit.byteLow = data[0x405]; | |
| 896 dataEnd.u8bit.byteMidLow = data[0x406]; | |
| 897 dataEnd.u8bit.byteMidHigh = data[0x407]; | |
| 898 | |
| 899 actualPointerSample = dataStart.u32bit; | |
| 900 if(dataEnd.u32bit >= dataStart.u32bit) | |
| 901 LengthAll = 1 + dataEnd.u32bit - dataStart.u32bit; | |
| 902 else | |
| 903 LengthAll = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
| 904 | |
| 905 LengthAll += 0x800; | |
| 906 | |
| 907 if(LengthAll > max_size) | |
| 908 return 0x800; | |
| 909 | |
| 910 actualAddress = actualPointerSample; | |
| 911 ext_flash_read_block_start(); | |
| 912 for(uint32_t i = 0x800; i < LengthAll; i++) | |
| 913 ext_flash_read_block(&data[i], EF_SAMPLE); | |
| 914 ext_flash_read_block_stop(); | |
| 915 return LengthAll; | |
| 916 } | |
| 917 | |
| 918 void ext_flash_write_dive_raw_with_double_header_1K(uint8_t *data, uint32_t length) | |
| 919 { | |
| 920 convert_Type dataStart, dataEnd; | |
| 921 SLogbookHeader headerTemp; | |
| 922 | |
| 923 // set actualPointerSample and get pointer to sample storage and disable flash write protect | |
| 924 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t *)&headerTemp); | |
| 925 | |
| 926 dataStart.u8bit.byteHigh = 0; | |
| 927 dataStart.u8bit.byteLow = headerTemp.pBeginProfileData[0]; | |
| 928 dataStart.u8bit.byteMidLow = headerTemp.pBeginProfileData[1]; | |
| 929 dataStart.u8bit.byteMidHigh = headerTemp.pBeginProfileData[2]; | |
| 930 | |
| 931 dataEnd.u32bit = dataStart.u32bit + length - 0x801; | |
| 932 if(dataEnd.u32bit > SAMPLESTOP) | |
| 933 dataEnd.u32bit -= SAMPLESTOP + SAMPLESTART - 1; | |
| 934 | |
| 935 data[0x002] = data[0x402] = dataStart.u8bit.byteLow; | |
| 936 data[0x003] = data[0x403] = dataStart.u8bit.byteMidLow; | |
| 937 data[0x004] = data[0x404] = dataStart.u8bit.byteMidHigh; | |
| 938 data[0x005] = data[0x405] = dataEnd.u8bit.byteLow; | |
| 939 data[0x006] = data[0x406] = dataEnd.u8bit.byteMidLow; | |
| 940 data[0x007] = data[0x407] = dataEnd.u8bit.byteMidHigh; | |
| 941 | |
| 942 // set actualPointerHeader to next free header and update lastDiveLogId | |
| 943 ext_flash_create_new_dive_log(0); | |
| 944 | |
| 945 // copy header data | |
| 946 ef_write_block(data,0x800,EF_HEADER, 1); | |
| 947 | |
| 948 // copy sample data | |
| 949 ef_write_block(&data[0x800], length-0x800, EF_SAMPLE, 1); | |
| 950 | |
| 951 // update logFlashNextSampleStartAddress | |
| 952 settingsGetPointer()->logFlashNextSampleStartAddress = actualPointerSample; | |
| 953 } | |
| 954 | |
| 955 | |
| 956 // =============================================================================== | |
| 957 // ext_flash_read_header_memory | |
| 958 /// @brief This function returns the entire header space 1:1 | |
| 959 /// @date 04-April-2016 | |
| 960 /// | |
| 961 /// @param *data 256KB output | |
| 962 // =============================================================================== | |
| 963 void ext_flash_read_header_memory(uint8_t *data) | |
| 964 { | |
| 965 actualAddress = HEADERSTART; | |
| 966 actualPointerHeader = actualAddress; | |
| 967 ext_flash_read_block_start(); | |
| 968 for(int i=0;i<8;i++) | |
| 969 ext_flash_read_block_multi(&data[0x8000 * i], 0x8000, EF_HEADER); | |
| 970 ext_flash_read_block_stop(); | |
| 971 } | |
| 972 | |
| 973 | |
| 974 // =============================================================================== | |
| 975 // ext_flash_read_header_memory | |
| 976 /// @brief This function erases and overwrites the entire logbook header block | |
| 977 /// @date 04-April-2016 | |
| 978 /// | |
| 979 /// @param *data 256KB input of header memory 1:1 | |
| 980 // =============================================================================== | |
| 981 void ext_flash_write_header_memory(uint8_t *data) | |
| 982 { | |
| 983 actualAddress = HEADERSTART; | |
| 984 actualPointerHeader = actualAddress; | |
| 985 ef_write_block(data, 0x40000, EF_HEADER, 0); | |
| 986 } | |
| 987 | |
| 988 | |
| 989 void ext_flash_open_read_sample(uint8_t StepBackwards, uint32_t *totalNumberOfBytes) | |
| 990 { | |
| 991 SSettings *settings = settingsGetPointer(); | |
| 992 uint8_t id; | |
| 993 convert_Type dataStart, dataEnd; | |
| 994 uint8_t header1, header2; | |
| 995 | |
| 996 id = settings->lastDiveLogId; | |
| 997 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 998 # | |
| 999 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1000 actualPointerHeader = actualAddress; | |
| 1001 | |
| 1002 ext_flash_read_block_start(); | |
| 1003 /* little endian */ | |
| 1004 ext_flash_read_block(&header1, EF_HEADER); | |
| 1005 ext_flash_read_block(&header2, EF_HEADER); | |
| 1006 dataStart.u8bit.byteHigh = 0; | |
| 1007 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1008 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1009 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1010 dataEnd.u8bit.byteHigh = 0; | |
| 1011 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
| 1012 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
| 1013 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
| 1014 ext_flash_read_block_stop(); | |
| 1015 | |
| 1016 actualPointerSample = dataStart.u32bit; | |
| 1017 if(dataEnd.u32bit >= dataStart.u32bit) | |
| 1018 LengthLeftSampleRead = 1 + dataEnd.u32bit - dataStart.u32bit; | |
| 1019 else | |
| 1020 LengthLeftSampleRead = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
| 1021 *totalNumberOfBytes = LengthLeftSampleRead; | |
| 1022 | |
| 1023 actualAddress = actualPointerSample; | |
| 1024 ext_flash_read_block_start(); | |
| 1025 } | |
| 1026 | |
| 1027 | |
| 1028 void ext_flash_read_next_sample_part(uint8_t *pSample, uint8_t length) | |
| 1029 { | |
| 1030 for(uint16_t i = 0; i < length; i++) | |
| 1031 ext_flash_read_block(&pSample[i], EF_SAMPLE); | |
| 1032 } | |
| 1033 | |
| 1034 | |
| 1035 void ext_flash_close_read_sample(void) | |
| 1036 { | |
| 1037 actualPointerSample = actualAddress; | |
| 1038 ext_flash_read_block_stop(); | |
| 1039 } | |
| 1040 | |
| 1041 | |
| 1042 void ext_flash_set_entry_point(void) | |
| 1043 { | |
| 1044 entryPoint = actualAddress; | |
| 1045 } | |
| 1046 | |
| 1047 | |
| 1048 void ext_flash_reopen_read_sample_at_entry_point(void) | |
| 1049 { | |
| 1050 error_led_on(); | |
| 1051 chip_unselect(); | |
| 1052 wait_chip_not_busy(); | |
| 1053 | |
| 1054 actualAddress = entryPoint; | |
| 1055 ext_flash_read_block_start(); | |
| 1056 error_led_off(); | |
| 1057 } | |
| 1058 | |
| 1059 /* | |
| 1060 uint8_t ext_flash_point_to_64k_block_in_headerSpace(uint8_t logId) | |
| 1061 { | |
| 1062 uint32_t pointerToData = logId * 0x800; | |
| 1063 | |
| 1064 return pointerToData / 0x10000; | |
| 1065 } | |
| 1066 */ | |
| 1067 | |
| 1068 | |
| 1069 // =============================================================================== | |
| 1070 // ext_flash_repair_dive_numbers_starting_count_helper | |
| 1071 /// @brief | |
| 1072 /// @date 22-June-2016 | |
| 1073 | |
| 1074 // =============================================================================== | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1075 static uint16_t ext_flash_repair_dive_numbers_starting_count_helper(uint8_t *data, uint8_t *change64k, uint16_t startNumber, uint8_t lastLogId) |
| 38 | 1076 { |
| 1077 const uint32_t headerStep = 0x800; | |
| 1078 uint8_t actualLogId = 0; | |
| 1079 uint16_t oldNumber = 0; | |
| 1080 uint16_t actualNumber = 0; | |
| 1081 SLogbookHeader *ptrLogbookHeader = 0; | |
| 1082 | |
| 1083 if(startNumber == 0) | |
| 1084 return 0; | |
| 1085 | |
| 1086 actualNumber = startNumber - 1; | |
| 1087 | |
| 282 | 1088 // where is the oldest dive (Which is now getting startNumber) |
| 38 | 1089 // use first header for ease (without HEADER2OFFSET for end of dive header) |
| 1090 // compare for lastLogId to prevent endless loop | |
| 1091 | |
| 1092 if(*(uint16_t*)&data[lastLogId * headerStep] != 0xFAFA) | |
| 1093 return 0; | |
| 1094 | |
| 1095 actualLogId = lastLogId - 1; | |
| 1096 while((*(uint16_t*)&data[actualLogId * headerStep] == 0xFAFA) && (actualLogId != lastLogId)) | |
| 1097 { | |
| 1098 actualLogId--; | |
| 1099 } | |
| 1100 | |
| 1101 // now pointing to one behind the last | |
| 1102 while(actualLogId != lastLogId) | |
| 1103 { | |
| 1104 actualLogId++; | |
| 1105 actualNumber++; | |
| 1106 ptrLogbookHeader = (SLogbookHeader *)&data[actualLogId * headerStep]; | |
| 1107 | |
| 1108 oldNumber = ptrLogbookHeader->diveNumber; | |
| 1109 if(oldNumber != actualNumber) | |
| 1110 { | |
| 1111 // change64k[ext_flash_point_to_64k_block_in_headerSpace(actualLogId )] = 1; | |
| 1112 change64k[(actualLogId * 0x800)/0x10000] = 1; | |
| 1113 ptrLogbookHeader->diveNumber = actualNumber; | |
| 1114 ptrLogbookHeader = (SLogbookHeader *)(&data[actualLogId * headerStep] + HEADER2OFFSET); | |
| 1115 ptrLogbookHeader->diveNumber = actualNumber; | |
| 1116 } | |
| 1117 } | |
| 1118 | |
| 1119 return actualNumber; | |
| 1120 } | |
| 1121 | |
| 1122 // =============================================================================== | |
| 1123 // ext_flash_repair_SPECIAL_dive_numbers_starting_count_with | |
| 1124 /// @brief This function | |
| 1125 /// @date 04-April-2016 | |
| 282 | 1126 /// problem (160621): 64K blocks (32 dives) in the new flash memory chip |
| 1127 /// This block needs to be deleted | |
| 1128 /// these where only 4KB block before | |
| 38 | 1129 /// @output endCount, last diveNumber |
| 1130 | |
| 1131 // =============================================================================== | |
| 1132 uint16_t ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) | |
| 1133 { | |
| 1134 uint32_t logCopyDataPtr = 0; | |
| 1135 uint8_t *data; | |
| 1136 uint16_t lastCount; | |
| 282 | 1137 uint8_t listOfChanged64kBlocks[8]; // 32 dives each 64K |
| 38 | 1138 |
| 1139 logCopyDataPtr = getFrame(97); | |
| 1140 data = (uint8_t *)logCopyDataPtr; | |
| 1141 | |
| 1142 for(int i=0;i<8;i++) | |
| 1143 listOfChanged64kBlocks[i] = 0; | |
| 1144 | |
| 1145 actualAddress = HEADERSTART; | |
| 1146 ext_flash_read_block_start(); | |
| 1147 ext_flash_read_block_multi(data,0x100000,EF_HEADER); | |
| 1148 ext_flash_read_block_stop(); | |
| 1149 | |
| 1150 lastCount = ext_flash_repair_dive_numbers_starting_count_helper(data, listOfChanged64kBlocks, startCount, settingsGetPointer()->lastDiveLogId); | |
| 1151 | |
| 1152 for(int i=0;i<8;i++) | |
| 1153 { | |
| 1154 if(listOfChanged64kBlocks[i] != 0) | |
| 1155 { | |
| 1156 actualPointerHeader = HEADERSTART + (i * 0x10000); | |
| 1157 ef_write_block(&data[i * 0x10000], 0x10000, EF_HEADER, 0); | |
| 1158 } | |
| 1159 } | |
| 1160 | |
| 1161 releaseFrame(97,logCopyDataPtr); | |
| 1162 if(settingsGetPointer()->totalDiveCounter < lastCount) | |
| 1163 { | |
| 1164 settingsGetPointer()->totalDiveCounter = lastCount; | |
| 1165 } | |
| 1166 return lastCount; | |
| 1167 } | |
| 1168 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1169 /* |
| 38 | 1170 void OLD_ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) |
| 1171 { | |
| 1172 uint16_t counterStorage[256]; | |
| 1173 uint8_t start = 0xFF; | |
| 1174 uint32_t logCopyDataPtr = 0; | |
| 1175 uint8_t *data; | |
| 1176 uint8_t startAbsolute = 0; | |
| 1177 int16_t count = 0; | |
| 1178 _Bool repair = 0; | |
| 1179 uint8_t startBackup = 0; | |
| 1180 | |
| 1181 SLogbookHeader tempLogbookHeader; | |
| 1182 SLogbookHeader *ptrHeaderInData1a; | |
| 1183 SLogbookHeader *ptrHeaderInData1b; | |
| 1184 SLogbookHeader *ptrHeaderInData2a; | |
| 1185 SLogbookHeader *ptrHeaderInData2b; | |
| 1186 | |
| 1187 logCopyDataPtr = getFrame(97); | |
| 1188 data = (uint8_t *)logCopyDataPtr; | |
| 1189 ptrHeaderInData1a = (SLogbookHeader *)logCopyDataPtr; | |
| 1190 ptrHeaderInData1b = (SLogbookHeader *)(logCopyDataPtr + HEADER2OFFSET); | |
| 1191 ptrHeaderInData2a = (SLogbookHeader *)(logCopyDataPtr + 0x800); | |
| 1192 ptrHeaderInData2b = (SLogbookHeader *)(logCopyDataPtr + 0x800 + HEADER2OFFSET); | |
| 1193 | |
| 1194 // get data | |
| 1195 for(int StepBackwards = 0; StepBackwards < 255; StepBackwards++) | |
| 1196 { | |
| 1197 logbook_getHeader(StepBackwards, &tempLogbookHeader); | |
| 1198 counterStorage[StepBackwards+1] = tempLogbookHeader.diveNumber; | |
| 1199 if(tempLogbookHeader.diveHeaderStart == 0xFAFA) | |
| 1200 start = StepBackwards; | |
| 1201 else | |
| 1202 break; | |
| 1203 } | |
| 1204 | |
| 1205 if(start == 0xFF) | |
| 1206 return; | |
| 1207 | |
| 1208 count = start + 1; | |
| 1209 startAbsolute = settingsGetPointer()->lastDiveLogId; | |
| 1210 | |
| 1211 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1212 |
| 38 | 1213 if(start%2) |
| 1214 { | |
| 1215 if(counterStorage[start] != startCount) | |
| 1216 { | |
| 1217 // clear data | |
| 1218 for(int i=0;i<0x800*2;i++) | |
| 1219 data[i] = 0xFF; | |
| 1220 | |
| 1221 uint8_t id = settingsGetPointer()->lastDiveLogId; | |
| 1222 id -= start; // 0-255, auto rollover | |
| 1223 | |
| 1224 // copy primary/pre-dive | |
| 1225 actualAddress = HEADERSTART + (0x800 * id); | |
| 1226 ext_flash_read_block_start(); | |
| 1227 for(int i = 0; i < HEADERSIZE; i++) | |
| 1228 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1229 ext_flash_read_block_stop(); | |
| 1230 | |
| 1231 // copy main/secondary/post-dive | |
| 1232 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1233 ext_flash_read_block_start(); | |
| 1234 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1235 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1236 ext_flash_read_block_stop(); | |
| 1237 | |
| 1238 // repair | |
| 1239 ptrHeaderInData2a->diveNumber = startCount; | |
| 1240 ptrHeaderInData2b->diveNumber = startCount; | |
| 1241 startCount++; | |
| 1242 | |
| 1243 // write | |
| 1244 actualAddress = HEADERSTART + (0x800 * (id-1)); | |
| 1245 ef_write_block(data,0x800*2,EF_HEADER, 0); | |
| 1246 } | |
| 1247 start--; | |
| 1248 } | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1249 |
| 38 | 1250 // for(int count = start; count > -1; count -= 2) |
| 1251 | |
| 1252 while(count > 0) | |
| 1253 { | |
| 1254 // clear data | |
| 1255 for(int i=0;i<0x1000;i++) | |
| 1256 data[i] = 0xFF; | |
| 1257 | |
| 1258 repair = 0; | |
| 1259 | |
| 1260 startBackup = startAbsolute; | |
| 1261 | |
| 1262 if(startAbsolute%2) // 0x800 to 0x1000 | |
| 1263 { | |
| 1264 // copy second pre-dive | |
| 1265 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1266 ext_flash_read_block_start(); | |
| 1267 for(int i = 0x800; i < HEADERSIZE+0x800; i++) | |
| 1268 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1269 ext_flash_read_block_stop(); | |
| 1270 | |
| 1271 // copy second post-dive | |
| 1272 actualAddress = HEADERSTART + HEADER2OFFSET + (0x800 * startAbsolute); | |
| 1273 ext_flash_read_block_start(); | |
| 1274 for(int i = 0xC00; i < HEADERSIZE+0xC00; i++) | |
| 1275 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1276 ext_flash_read_block_stop(); | |
| 1277 | |
| 1278 if(counterStorage[count] != startCount) | |
| 1279 { | |
| 1280 ptrHeaderInData2a->diveNumber = startCount; | |
| 1281 ptrHeaderInData2b->diveNumber = startCount; | |
| 1282 repair = 1; | |
| 1283 } | |
| 1284 startCount += 1; | |
| 1285 | |
| 1286 startAbsolute -= 1; | |
| 1287 count -= 1; | |
| 1288 | |
| 1289 if(count > 0) | |
| 1290 { | |
| 1291 // copy first pre-dive | |
| 1292 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1293 ext_flash_read_block_start(); | |
| 1294 for(int i = 0; i < HEADERSIZE; i++) | |
| 1295 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1296 ext_flash_read_block_stop(); | |
| 1297 | |
| 1298 // copy first post-dive | |
| 1299 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1300 ext_flash_read_block_start(); | |
| 1301 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1302 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1303 ext_flash_read_block_stop(); | |
| 1304 | |
| 1305 if(counterStorage[count] != startCount) | |
| 1306 { | |
| 1307 ptrHeaderInData1a->diveNumber = startCount; | |
| 1308 ptrHeaderInData1b->diveNumber = startCount; | |
| 1309 repair = 1; | |
| 1310 } | |
| 1311 startCount += 1; | |
| 1312 | |
| 1313 startAbsolute -= 1; | |
| 1314 count -= 1; | |
| 1315 } | |
| 1316 } | |
| 1317 else | |
| 1318 { | |
| 1319 // copy first pre-dive | |
| 1320 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1321 ext_flash_read_block_start(); | |
| 1322 for(int i = 0; i < HEADERSIZE; i++) | |
| 1323 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1324 ext_flash_read_block_stop(); | |
| 1325 | |
| 1326 // copy first post-dive | |
| 1327 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1328 ext_flash_read_block_start(); | |
| 1329 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1330 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1331 ext_flash_read_block_stop(); | |
| 1332 | |
| 1333 if(counterStorage[count] != startCount) | |
| 1334 { | |
| 1335 ptrHeaderInData1a->diveNumber = startCount; | |
| 1336 ptrHeaderInData1b->diveNumber = startCount; | |
| 1337 repair = 1; | |
| 1338 } | |
| 1339 startCount += 1; | |
| 1340 | |
| 1341 startAbsolute -= 1; | |
| 1342 count -= 1; | |
| 1343 } | |
| 1344 | |
| 1345 // write | |
| 1346 if(repair) | |
| 1347 { | |
| 1348 actualPointerHeader = HEADERSTART + (0x1000 * startBackup%2); | |
| 1349 ef_write_block(data,0x1000,EF_HEADER, 0); | |
| 1350 } | |
| 1351 } | |
| 1352 releaseFrame(97,logCopyDataPtr); | |
| 1353 settingsGetPointer()->totalDiveCounter = startCount; | |
| 1354 } | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1355 */ |
| 38 | 1356 |
|
452
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1357 uint8_t ext_dive_log_consistent(void) |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1358 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1359 uint8_t ret = 0; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1360 uint8_t header1, header2; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1361 uint8_t id; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1362 convert_Type dataStart; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1363 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1364 SSettings *settings = settingsGetPointer(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1365 id = settings->lastDiveLogId; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1366 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1367 actualAddress = HEADERSTART + (0x800 * id); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1368 ext_flash_read_block_start(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1369 ext_flash_read_block(&header1, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1370 ext_flash_read_block(&header2, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1371 dataStart.u8bit.byteHigh = 0; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1372 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1373 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1374 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1375 ext_flash_read_block_stop(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1376 if((header1 == 0xFA) && (header2 == 0xFA)) /* Header is indicating the start of a dive */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1377 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1378 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1379 ext_flash_read_block_start(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1380 ext_flash_read_block(&header1, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1381 ext_flash_read_block(&header2, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1382 ext_flash_read_block_stop(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1383 if((header1 == 0xFA) && (header2 == 0xFA)) /* Secondary header was written at the end of a dive */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1384 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1385 ret = 1; /* => lastDiveLogID points to a valid dive entry */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1386 } |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1387 } |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1388 return ret; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1389 } |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1390 |
| 38 | 1391 // =============================================================================== |
| 1392 // ext_flash_repair_dive_log | |
| 1393 /// @brief This function | |
| 1394 /// does set | |
| 1395 /// logFlashNextSampleStartAddress | |
| 1396 /// and | |
| 1397 /// lastDiveLogId | |
| 1398 /// | |
|
452
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
1399 |
| 38 | 1400 void ext_flash_repair_dive_log(void) |
| 1401 { | |
| 1402 uint8_t header1, header2; | |
| 1403 convert_Type dataStart; | |
| 1404 | |
| 1405 for(int id = 0; id < 255;id++) | |
| 1406 { | |
| 1407 actualAddress = HEADERSTART + (0x800 * id); | |
| 1408 ext_flash_read_block_start(); | |
| 1409 ext_flash_read_block(&header1, EF_HEADER); | |
| 1410 ext_flash_read_block(&header2, EF_HEADER); | |
| 1411 dataStart.u8bit.byteHigh = 0; | |
| 1412 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1413 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1414 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1415 ext_flash_read_block_stop(); | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1416 if((header1 == 0xFA) && (header2 == 0xFA)) /* Header is indicating the start of a dive */ |
| 38 | 1417 { |
| 1418 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1419 ext_flash_read_block_start(); | |
| 1420 ext_flash_read_block(&header1, EF_HEADER); | |
| 1421 ext_flash_read_block(&header2, EF_HEADER); | |
| 1422 ext_flash_read_block_stop(); | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1423 if((header1 != 0xFA) || (header2 != 0xFA)) /* Secondary header was not written at the end of a dive */ |
| 38 | 1424 { |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1425 actualPointerSample = dataStart.u32bit; /* Set datapointer to position stored in header written at beginning of dive */ |
| 38 | 1426 actualAddress = actualPointerSample; |
| 1427 logbook_recover_brokenlog(id); | |
| 1428 SSettings *settings = settingsGetPointer(); | |
| 1429 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
| 1430 } | |
| 1431 } | |
| 1432 } | |
| 1433 ext_flash_find_start(); | |
| 1434 } | |
| 1435 | |
| 1436 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1437 static void ext_flash_find_start(void) |
| 38 | 1438 { |
| 1439 uint8_t id; | |
| 1440 uint8_t header1, header2; | |
| 1441 convert_Type dataStart, dataEnd; | |
| 1442 | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1443 /* TODO Cleanup_Ref_1: cleanup logFlashNextSampleStartAddress and lastDiveLogId */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1444 /* The implementation below would cause problems in case more then 254 dives would be done. */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1445 /* This is avoided by Cleanup_Ref2 */ |
|
441
9a9e4908ce2e
fix potential issue with >255 dives in the logbook
heinrichsweikamp
parents:
429
diff
changeset
|
1446 for(id = 0; id <= 255;id++) |
| 38 | 1447 { |
| 1448 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1449 ext_flash_read_block_start(); | |
| 1450 ext_flash_read_block(&header1, EF_HEADER); | |
| 1451 ext_flash_read_block(&header2, EF_HEADER); | |
| 1452 dataStart.u8bit.byteHigh = 0; | |
| 1453 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1454 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1455 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1456 ext_flash_read_block_stop(); | |
| 1457 if((header1 == 0xFF) && (header2 == 0xFF)) | |
| 1458 { | |
| 1459 break; | |
| 1460 } | |
| 1461 } | |
| 1462 id--; | |
| 1463 SSettings *settings = settingsGetPointer(); | |
| 1464 settings->lastDiveLogId = id; | |
| 1465 | |
| 1466 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1467 actualPointerHeader = actualAddress; | |
| 1468 | |
| 1469 ext_flash_read_block_start(); | |
| 1470 | |
| 1471 ext_flash_read_block(&header1, EF_HEADER); | |
| 1472 ext_flash_read_block(&header2, EF_HEADER); | |
| 1473 dataStart.u8bit.byteHigh = 0; | |
| 1474 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1475 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1476 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1477 dataEnd.u8bit.byteHigh = 0; | |
| 1478 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
| 1479 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
| 1480 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
| 1481 ext_flash_read_block_stop(); | |
| 1482 | |
| 1483 //Find free space | |
| 1484 if((header1 == 0xFA) && (header2 == 0xFA)) | |
| 1485 { | |
| 1486 uint8_t uiRead = 0; | |
| 1487 int countFF = 0; | |
| 1488 //End of last complete dive | |
| 1489 actualPointerSample = dataEnd.u32bit ; | |
| 1490 actualAddress = actualPointerSample; | |
| 1491 //Check if there are samples of dives with less than half a minute | |
| 1492 while(true) | |
| 1493 { | |
| 1494 ext_flash_read_block_start(); | |
| 1495 ext_flash_read_block(&uiRead, EF_SAMPLE); | |
| 1496 if(uiRead == 0xFF) | |
| 1497 countFF++; | |
| 1498 else | |
| 1499 countFF = 0; | |
| 1500 | |
| 1501 | |
| 1502 | |
| 1503 if(countFF == 10) | |
| 1504 { | |
| 1505 actualAddress -= 10; | |
| 1506 break; | |
| 1507 } | |
| 1508 | |
| 1509 //New page: clear | |
| 1510 if(ext_flash_erase_if_on_page_start()) | |
| 1511 break; | |
| 1512 } | |
| 1513 // Set new start address | |
| 1514 actualPointerSample = actualAddress; | |
| 1515 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
| 1516 } | |
| 1517 else | |
| 1518 { | |
| 1519 settings->logFlashNextSampleStartAddress = SAMPLESTART; | |
| 1520 } | |
| 1521 } | |
| 1522 | |
| 1523 | |
| 1524 #endif | |
| 1525 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1526 static void ext_flash_disable_protection(void) |
| 38 | 1527 { |
| 1528 /* | |
| 1529 extFlashStatusBit8_Type status; | |
| 1530 | |
| 1531 status.uw = 0; | |
| 1532 | |
| 1533 wait_chip_not_busy(); | |
| 1534 write_spi(0x50,RELEASE); // EWSR | |
| 1535 write_spi(0x01,HOLDCS); // WRSR | |
| 1536 write_spi(status.uw,RELEASE); // new status | |
| 1537 */ | |
| 1538 } | |
| 1539 | |
| 1540 | |
| 1541 void ext_flash_disable_protection_for_logbook(void) | |
| 1542 { | |
| 1543 /* | |
| 1544 extFlashStatusBit8_Type status; | |
| 1545 | |
| 1546 status.uw = 0; | |
| 1547 status.ub.BlockProtect0 = 1; | |
| 1548 status.ub.BlockProtect1 = 0; | |
| 1549 status.ub.BlockProtect2 = 1; | |
| 1550 status.ub.BlockProtect3 = 0; // not set in OSTC3. Why? | |
| 1551 | |
| 1552 wait_chip_not_busy(); | |
| 1553 write_spi(0x50,RELEASE); // EWSR | |
| 1554 write_spi(0x01,HOLDCS); // WRSR | |
| 1555 write_spi(status.uw,RELEASE); // new status | |
| 1556 */ | |
| 1557 } | |
| 1558 | |
| 1559 | |
| 1560 void ext_flash_enable_protection(void) | |
| 1561 { | |
| 1562 /* | |
| 1563 extFlashStatusBit8_Type status; | |
| 1564 | |
| 1565 status.uw = 0; | |
| 1566 status.ub.BlockProtect0 = 1; | |
| 1567 status.ub.BlockProtect1 = 1; | |
| 1568 status.ub.BlockProtect2 = 1; | |
| 1569 status.ub.BlockProtect3 = 1; // not set in OSTC3. Why? | |
| 1570 | |
| 1571 wait_chip_not_busy(); | |
| 1572 write_spi(0x50,RELEASE); // EWSR | |
| 1573 write_spi(0x01,HOLDCS); // WRSR | |
| 1574 write_spi(status.uw,RELEASE); // new status | |
| 1575 */ | |
| 1576 } | |
| 1577 | |
| 1578 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1579 /*void ext_flash_erase_chip(void) |
| 38 | 1580 { |
| 1581 wait_chip_not_busy(); | |
| 1582 write_spi(0x06,RELEASE); | |
| 1583 write_spi(0x60,RELEASE); | |
| 1584 wait_chip_not_busy(); | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1585 }*/ |
| 38 | 1586 |
| 1587 void ext_flash_erase_firmware(void) | |
| 1588 { | |
| 1589 uint32_t size, blocks_64k; | |
| 1590 | |
| 1591 actualAddress = FWSTART; | |
| 1592 size = 1 + FWSTOP - FWSTART; | |
| 1593 blocks_64k = size / 0x10000; | |
| 1594 ef_erase_64K(blocks_64k); | |
| 1595 } | |
| 1596 | |
| 1597 void ext_flash_erase_firmware2(void) | |
| 1598 { | |
| 1599 uint32_t size, blocks_64k; | |
| 1600 | |
| 1601 actualAddress = FWSTART2; | |
| 1602 size = 1 + FWSTOP2 - FWSTART2; | |
| 1603 blocks_64k = size / 0x10000; | |
| 1604 ef_erase_64K(blocks_64k); | |
| 1605 } | |
| 1606 | |
| 1607 | |
| 1608 | |
| 1609 void ext_flash_erase_logbook(void) | |
| 1610 { | |
| 1611 uint32_t size, blocks_64k; | |
| 1612 | |
| 1613 ext_flash_disable_protection_for_logbook(); | |
| 1614 | |
| 1615 actualAddress = SAMPLESTART; | |
| 1616 size = 1 + SAMPLESTOP - SAMPLESTART; | |
| 1617 blocks_64k = size / 0x10000; | |
| 1618 ef_erase_64K(blocks_64k); | |
| 1619 | |
| 1620 actualAddress = HEADERSTART; | |
| 1621 size = 1 + HEADERSTOP - HEADERSTART; | |
| 1622 blocks_64k = size / 0x10000; | |
| 1623 ef_erase_64K(blocks_64k); | |
| 1624 | |
| 1625 ext_flash_enable_protection(); | |
| 1626 } | |
| 1627 | |
| 1628 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1629 static void ext_flash_erase4kB(void) |
| 38 | 1630 { |
| 1631 wait_chip_not_busy(); | |
| 1632 write_spi(0x06,RELEASE);/* WREN */ | |
| 1633 write_spi(0x20,HOLDCS);/* sector erase cmd */ | |
| 1634 write_address(RELEASE); | |
| 1635 } | |
| 1636 | |
| 282 | 1637 /* be careful - might not work with entire family and other products |
| 38 | 1638 * see page 14 of LOGBOOK_V3_S25FS-S_00-271247.pdf |
| 1639 */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1640 static void ext_flash_erase32kB(void) |
| 38 | 1641 { |
| 1642 uint32_t actualAddress_backup; | |
| 1643 | |
| 1644 actualAddress_backup = actualAddress; | |
| 1645 actualAddress = 0; | |
| 1646 wait_chip_not_busy(); | |
| 1647 write_spi(0x06,RELEASE);/* WREN */ | |
| 1648 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
| 1649 write_address(RELEASE); | |
| 1650 actualAddress = actualAddress_backup; | |
| 1651 } | |
| 1652 | |
| 1653 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1654 static void ext_flash_erase64kB(void) |
| 38 | 1655 { |
| 1656 wait_chip_not_busy(); | |
| 1657 write_spi(0x06,RELEASE);/* WREN */ | |
| 1658 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
| 1659 write_address(RELEASE); | |
| 1660 } | |
| 1661 | |
| 1662 | |
| 1663 void ext_flash_read_block_start(void) | |
| 1664 { | |
| 1665 wait_chip_not_busy(); | |
| 1666 write_spi(0x03,HOLDCS); /* WREN */ | |
| 1667 write_address(HOLDCS); | |
| 1668 } | |
| 1669 | |
| 1670 /* 4KB, 32KB, 64 KB, not the upper 16 MB with 4 Byte address at the moment */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1671 static uint8_t ext_flash_erase_if_on_page_start(void) |
| 38 | 1672 { |
| 1673 if(actualAddress < 0x00008000) | |
| 1674 { | |
| 1675 /* 4K Byte is 0x1000 */ | |
| 1676 if((actualAddress & 0xFFF) == 0) | |
| 1677 { | |
| 1678 ext_flash_erase4kB(); | |
| 1679 return 1; | |
| 1680 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1681 } |
| 38 | 1682 else |
| 1683 if(actualAddress < 0x00010000) | |
| 1684 { | |
| 1685 /* 32K Byte is only one page */ | |
| 1686 if(actualAddress == 0x00010000) | |
| 1687 { | |
| 1688 ext_flash_erase32kB(); | |
| 1689 return 1; | |
| 1690 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1691 } |
| 38 | 1692 else |
| 1693 { | |
| 1694 /* 64K Byte is 0x10000 */ | |
| 1695 if((actualAddress & 0xFFFF) == 0) | |
| 1696 { | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1697 if(preparedPageAddress == actualAddress) /* has page already been prepared before? (at the moment for samples only) */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1698 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1699 preparedPageAddress = 0; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1700 |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1701 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1702 else |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1703 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1704 ext_flash_erase64kB(); |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1705 } |
| 38 | 1706 return 1; |
| 1707 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1708 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1709 |
| 38 | 1710 return 0; |
| 1711 } | |
| 1712 | |
| 1713 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1714 static void ext_flash_read_block(uint8_t *getByte, uint8_t type) |
| 38 | 1715 { |
| 1716 *getByte = read_spi(HOLDCS);/* read data */ | |
| 1717 ext_flash_incf_address(type); | |
| 1718 } | |
| 1719 | |
| 1720 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1721 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type) |
| 38 | 1722 { |
| 1723 uint8_t *data; | |
| 1724 data = getByte; | |
| 1725 | |
| 1726 for(uint32_t i=0;i<size;i++) | |
| 1727 { | |
| 1728 data[i] = read_spi(HOLDCS);/* read data */ | |
| 1729 ext_flash_incf_address(type); | |
| 1730 } | |
| 1731 } | |
| 1732 | |
| 1733 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1734 static void ext_flash_read_block_stop(void) |
| 38 | 1735 { |
| 1736 chip_unselect(); | |
| 1737 } | |
| 1738 | |
| 1739 | |
| 1740 /* Private functions ---------------------------------------------------------*/ | |
| 1741 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1742 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase) |
| 38 | 1743 { |
| 1744 uint32_t remaining_page_size, remaining_length, remaining_space_to_ring_end; | |
| 420 | 1745 uint32_t i=0; |
| 1746 | |
| 38 | 1747 if(!length) |
| 1748 return; | |
| 1749 | |
| 1750 uint32_t ringStart, ringStop; | |
| 1751 | |
| 1752 switch(type) | |
| 1753 { | |
| 1754 case EF_HEADER: | |
| 1755 actualAddress = actualPointerHeader; | |
| 1756 ringStart = HEADERSTART; | |
| 1757 ringStop = HEADERSTOP; | |
| 1758 break; | |
| 1759 case EF_SAMPLE: | |
| 1760 actualAddress = actualPointerSample; | |
| 1761 ringStart = SAMPLESTART; | |
| 1762 ringStop = SAMPLESTOP; | |
| 1763 break; | |
| 1764 case EF_DEVICEDATA: | |
| 1765 actualAddress = actualPointerDevicedata; | |
| 1766 ringStart = DDSTART; | |
| 1767 ringStop = DDSTOP; | |
| 1768 break; | |
| 1769 case EF_VPMDATA: | |
| 1770 actualAddress = actualPointerVPM; | |
| 1771 ringStart = VPMSTART; | |
| 1772 ringStop = VPMSTOP; | |
| 1773 break; | |
| 1774 case EF_SETTINGS: | |
| 1775 actualAddress = actualPointerSettings; | |
| 1776 ringStart = SETTINGSSTART; | |
| 1777 ringStop = SETTINGSSTOP; | |
| 1778 break; | |
| 1779 case EF_FIRMWARE: | |
| 1780 actualAddress = actualPointerFirmware; | |
| 1781 ringStart = FWSTART; | |
| 1782 ringStop = FWSTOP; | |
| 1783 break; | |
| 1784 case EF_FIRMWARE2: | |
| 1785 actualAddress = actualPointerFirmware2; | |
| 1786 ringStart = FWSTART2; | |
| 1787 ringStop = FWSTOP2; | |
| 1788 break; | |
| 1789 default: | |
| 1790 ringStart = FLASHSTART; | |
| 1791 ringStop = FLASHSTOP; | |
| 1792 break; | |
| 1793 } | |
| 1794 /* safety */ | |
| 1795 if(actualAddress < ringStart) | |
| 1796 actualAddress = ringStart; | |
| 1797 | |
| 1798 if(do_not_erase == 0) | |
|
459
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1799 { |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1800 if((ext_flash_erase_if_on_page_start()) && (type == EF_SAMPLE)) /* invalidate header sample information if needed */ |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1801 { |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1802 ext_flash_invalidate_sample_index(actualAddress); |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1803 } |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
1804 } |
| 38 | 1805 |
| 420 | 1806 while( i<length) |
| 38 | 1807 { |
| 1808 ef_hw_rough_delay_us(5); | |
| 1809 wait_chip_not_busy(); | |
| 1810 write_spi(0x06,RELEASE); /* WREN */ | |
| 1811 write_spi(0x02,HOLDCS); /* write cmd */ | |
| 1812 write_address(HOLDCS); | |
| 1813 | |
| 1814 remaining_length = length - i; | |
| 420 | 1815 remaining_page_size = 0xFF - (uint8_t)(actualAddress & 0xFF) +1; |
| 38 | 1816 remaining_space_to_ring_end = ringStop - actualAddress; |
| 1817 | |
| 420 | 1818 if(remaining_length >= 256) |
| 1819 { | |
| 1820 remaining_length = 255; /* up to 256 bytes may be written in one burst. Last byte is written with release */ | |
| 1821 } | |
| 1822 else | |
| 38 | 1823 { |
| 420 | 1824 remaining_length--; /* last byte needed for release */ |
| 1825 } | |
| 1826 if(remaining_length >= (remaining_page_size) ) /* use 256 byte page and calculate number of bytes left */ | |
| 1827 { | |
| 1828 remaining_length = remaining_page_size - 1; | |
| 1829 } | |
| 1830 if( (remaining_space_to_ring_end >= 256)) | |
| 1831 { | |
| 1832 for(int j=0; j<remaining_length; j++) | |
| 38 | 1833 { |
| 1834 write_spi(sendByte[i],HOLDCS);/* write data */ | |
| 1835 actualAddress++; | |
| 1836 i++; | |
| 1837 } | |
| 1838 } | |
| 1839 /* byte with RELEASE */ | |
| 1840 write_spi(sendByte[i],RELEASE);/* write data */ | |
| 1841 actualAddress++; | |
| 420 | 1842 i++; |
| 1843 | |
| 38 | 1844 if(actualAddress > ringStop) |
| 1845 actualAddress = ringStart; | |
| 420 | 1846 |
| 38 | 1847 if(do_not_erase == 0) |
| 1848 ext_flash_erase_if_on_page_start(); | |
| 1849 } | |
| 1850 switch(type) | |
| 1851 { | |
| 1852 case EF_HEADER: | |
| 1853 actualPointerHeader = actualAddress; | |
| 1854 break; | |
| 1855 case EF_SAMPLE: | |
| 1856 actualPointerSample = actualAddress; | |
| 1857 break; | |
| 1858 case EF_DEVICEDATA: | |
| 1859 actualPointerDevicedata = actualAddress; | |
| 1860 break; | |
| 1861 case EF_VPMDATA: | |
| 1862 actualPointerVPM = actualAddress; | |
| 1863 break; | |
| 1864 case EF_SETTINGS: | |
| 1865 actualPointerSettings = actualAddress; | |
| 1866 break; | |
| 1867 case EF_FIRMWARE: | |
| 1868 actualPointerFirmware = actualAddress; | |
| 1869 break; | |
| 1870 case EF_FIRMWARE2: | |
| 1871 actualPointerFirmware2 = actualAddress; | |
| 1872 break; | |
| 1873 default: | |
| 1874 break; | |
| 1875 } | |
| 1876 } | |
| 1877 | |
| 1878 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1879 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length) |
| 38 | 1880 { |
| 1881 if((pointer & 0xFFF) == 0) | |
| 1882 return 1; | |
| 1883 | |
| 1884 uint32_t backup = actualAddress; | |
| 1885 uint8_t data; | |
| 1886 uint32_t size_to_page_end; | |
| 1887 | |
| 1888 size_to_page_end = 0x1000 - (pointer & 0xFFF); | |
| 1889 if(length > size_to_page_end) | |
| 1890 length = size_to_page_end; | |
| 1891 | |
| 1892 actualAddress = pointer; | |
| 1893 ext_flash_read_block_start(); | |
| 1894 | |
| 1895 for(uint16_t i = 0; i<length; i++) | |
| 1896 { | |
| 1897 ext_flash_read_block(&data, 255); // 255 = ENTIRE FLASH | |
| 1898 if(data != 0xFF) | |
| 1899 { | |
| 1900 ext_flash_read_block_stop(); | |
| 1901 actualAddress = backup; | |
| 1902 return 0; | |
| 1903 } | |
| 1904 } | |
| 1905 ext_flash_read_block_stop(); | |
| 1906 actualAddress = backup; | |
| 1907 return 1; | |
| 1908 } | |
| 1909 | |
| 1910 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1911 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type) |
| 38 | 1912 { |
| 1913 uint32_t ringStart, ringStop; | |
| 1914 | |
| 1915 switch(type) | |
| 1916 { | |
| 1917 case EF_HEADER: | |
| 1918 ringStart = HEADERSTART; | |
| 1919 ringStop = HEADERSTOP; | |
| 1920 break; | |
| 1921 case EF_SAMPLE: | |
| 1922 ringStart = SAMPLESTART; | |
| 1923 ringStop = SAMPLESTOP; | |
| 1924 break; | |
| 1925 case EF_DEVICEDATA: | |
| 1926 ringStart = DDSTART; | |
| 1927 ringStop = DDSTOP; | |
| 1928 break; | |
| 1929 case EF_VPMDATA: | |
| 1930 ringStart = VPMSTART; | |
| 1931 ringStop = VPMSTOP; | |
| 1932 break; | |
| 1933 case EF_SETTINGS: | |
| 1934 ringStart = SETTINGSSTART; | |
| 1935 ringStop = SETTINGSSTOP; | |
| 1936 break; | |
| 1937 default: | |
| 1938 ringStart = FLASHSTART; | |
| 1939 ringStop = FLASHSTOP; | |
| 1940 break; | |
| 1941 } | |
| 1942 | |
| 1943 *pointer = (*pointer & 0xFFF) + 0x1000; | |
| 1944 | |
| 1945 if((*pointer < ringStart) || (*pointer >= ringStop)) | |
| 1946 *pointer = ringStart; | |
| 1947 } | |
| 1948 | |
| 1949 | |
| 1950 static void ef_erase_64K(uint32_t blocks) | |
| 1951 { | |
| 1952 for(uint32_t i = 0; i < blocks; i++) | |
| 1953 { | |
| 1954 wait_chip_not_busy(); | |
| 1955 write_spi(0x06,RELEASE);/* WREN */ | |
| 1956 write_spi(0xD8,HOLDCS);/* 64k erase cmd */ | |
| 1957 write_address(RELEASE); | |
| 1958 actualAddress += 0x10000; | |
| 1959 HAL_Delay(25); | |
| 1960 } | |
| 1961 } | |
| 1962 | |
| 1963 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1964 static void chip_unselect(void) |
| 38 | 1965 { |
| 1966 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_SET); // chip select | |
| 1967 } | |
| 1968 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1969 static void chip_select(void) |
| 38 | 1970 { |
| 1971 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_RESET); // chip select | |
| 1972 } | |
| 1973 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1974 static void error_led_on(void) |
| 38 | 1975 { |
| 1976 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_SET); | |
| 1977 } | |
| 1978 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1979 static void error_led_off(void) |
| 38 | 1980 { |
| 1981 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_RESET); | |
| 1982 } | |
| 1983 | |
| 1984 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1985 static uint8_t read_spi(uint8_t unselect_CS_afterwards) |
| 38 | 1986 { |
| 1987 uint8_t byte; | |
| 1988 | |
| 1989 chip_select(); | |
| 1990 | |
| 1991 if(HAL_SPI_Receive(&hspiDisplay, &byte, 1, 10000) != HAL_OK) | |
| 1992 Error_Handler_extflash(); | |
| 1993 | |
| 1994 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
| 1995 { | |
| 1996 } | |
| 1997 if(unselect_CS_afterwards) | |
| 1998 chip_unselect(); | |
| 1999 | |
| 2000 return byte; | |
| 2001 } | |
| 2002 | |
| 2003 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2004 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards) |
| 38 | 2005 { |
| 2006 chip_select(); | |
| 2007 | |
| 2008 if(HAL_SPI_Transmit(&hspiDisplay, &data, 1, 10000) != HAL_OK) | |
| 2009 Error_Handler_extflash(); | |
| 2010 | |
| 2011 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
| 2012 { | |
| 2013 } | |
| 2014 if(unselect_CS_afterwards) | |
| 2015 chip_unselect(); | |
| 2016 } | |
| 2017 | |
| 2018 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2019 static void write_address(uint8_t unselect_CS_afterwards) |
| 38 | 2020 { |
| 2021 uint8_t hi, med ,lo; | |
| 2022 | |
| 2023 hi = (actualAddress >> 16) & 0xFF; | |
| 2024 med = (actualAddress >> 8) & 0xFF; | |
| 2025 lo = actualAddress & 0xFF; | |
| 2026 | |
| 2027 write_spi(hi, HOLDCS); | |
| 2028 write_spi(med, HOLDCS); | |
| 2029 write_spi(lo, unselect_CS_afterwards); | |
| 2030 } | |
| 2031 | |
| 2032 | |
| 2033 static void wait_chip_not_busy(void) | |
| 2034 { | |
| 2035 uint8_t status; | |
| 2036 | |
| 2037 chip_unselect(); | |
| 2038 | |
| 2039 write_spi(0x05,HOLDCS); /* RDSR */ | |
| 2040 status = read_spi(HOLDCS);/* read status */ | |
| 2041 while(status & 0x01) | |
| 2042 { | |
| 2043 HAL_Delay(1); | |
| 2044 status = read_spi(HOLDCS);/* read status */ | |
| 2045 } | |
| 2046 chip_unselect(); | |
| 2047 } | |
| 2048 | |
| 2049 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2050 static void ext_flash_incf_address(uint8_t type) |
| 38 | 2051 { |
| 2052 uint32_t ringStart, ringStop; | |
| 2053 | |
| 2054 actualAddress += 1; | |
| 2055 | |
| 2056 switch(type) | |
| 2057 { | |
| 2058 case EF_HEADER: | |
| 2059 ringStart = HEADERSTART; | |
| 2060 ringStop = HEADERSTOP; | |
| 2061 break; | |
| 2062 case EF_SAMPLE: | |
| 2063 ringStart = SAMPLESTART; | |
| 2064 ringStop = SAMPLESTOP; | |
| 2065 break; | |
| 2066 case EF_DEVICEDATA: | |
| 2067 ringStart = DDSTART; | |
| 2068 ringStop = DDSTOP; | |
| 2069 break; | |
| 2070 case EF_VPMDATA: | |
| 2071 ringStart = VPMSTART; | |
| 2072 ringStop = VPMSTOP; | |
| 2073 break; | |
| 2074 case EF_SETTINGS: | |
| 2075 ringStart = SETTINGSSTART; | |
| 2076 ringStop = SETTINGSSTOP; | |
| 2077 break; | |
| 2078 case EF_FIRMWARE: | |
| 2079 ringStart = FWSTART; | |
| 2080 ringStop = FWSTOP; | |
| 2081 break; | |
| 2082 case EF_FIRMWARE2: | |
| 2083 ringStart = FWSTART2; | |
| 2084 ringStop = FWSTOP2; | |
| 2085 break; | |
| 2086 default: | |
| 2087 ringStart = FLASHSTART; | |
| 2088 ringStop = FLASHSTOP; | |
| 2089 break; | |
| 2090 } | |
| 2091 | |
| 2092 if((actualAddress < ringStart) || (actualAddress > ringStop)) | |
| 2093 actualAddress = ringStart; | |
| 2094 } | |
| 2095 | |
| 2096 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2097 static void ext_flash_decf_address_ring(uint8_t type) |
| 38 | 2098 { |
| 2099 uint32_t ringStart, ringStop; | |
| 2100 | |
| 2101 switch(type) | |
| 2102 { | |
| 2103 case EF_HEADER: | |
| 2104 ringStart = HEADERSTART; | |
| 2105 ringStop = HEADERSTOP; | |
| 2106 break; | |
| 2107 case EF_SAMPLE: | |
| 2108 ringStart = SAMPLESTART; | |
| 2109 ringStop = SAMPLESTOP; | |
| 2110 break; | |
| 2111 case EF_DEVICEDATA: | |
| 2112 ringStart = DDSTART; | |
| 2113 ringStop = DDSTOP; | |
| 2114 break; | |
| 2115 case EF_VPMDATA: | |
| 2116 ringStart = VPMSTART; | |
| 2117 ringStop = VPMSTOP; | |
| 2118 break; | |
| 2119 case EF_SETTINGS: | |
| 2120 ringStart = SETTINGSSTART; | |
| 2121 ringStop = SETTINGSSTOP; | |
| 2122 break; | |
| 2123 case EF_FIRMWARE: | |
| 2124 ringStart = FWSTART; | |
| 2125 ringStop = FWSTOP; | |
| 2126 break; | |
| 2127 case EF_FIRMWARE2: | |
| 2128 ringStart = FWSTART2; | |
| 2129 ringStop = FWSTOP2; | |
| 2130 break; | |
| 2131 default: | |
| 2132 ringStart = FLASHSTART; | |
| 2133 ringStop = FLASHSTOP; | |
| 2134 break; | |
| 2135 } | |
| 2136 | |
| 2137 if((actualAddress <= ringStart) || (actualAddress > ringStop)) | |
| 2138 actualAddress = ringStop; | |
| 2139 else | |
| 2140 actualAddress -= 1; | |
| 2141 } | |
| 2142 | |
| 2143 | |
| 2144 static void ef_hw_rough_delay_us(uint32_t delayUs) | |
| 2145 { | |
| 2146 if(!delayUs) | |
| 2147 return; | |
| 2148 delayUs*= 12; | |
| 2149 while(delayUs--); | |
| 2150 return; | |
| 2151 } | |
| 2152 | |
| 2153 static void Error_Handler_extflash(void) | |
| 2154 { | |
| 2155 while(1) | |
| 2156 { | |
| 2157 } | |
| 2158 } | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2159 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2160 void ext_flash_CloseSector(void) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2161 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2162 uint32_t actualAddressBackup = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2163 int i=0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2164 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2165 if(closeSectorAddress != 0) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2166 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2167 /* write some dummy bytes to the sector which is currently used for storing samples. This is done to "hide" problem if function is calles again */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2168 actualAddress = closeSectorAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2169 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2170 wait_chip_not_busy(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2171 write_spi(0x06,RELEASE); /* WREN */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2172 write_spi(0x02,HOLDCS); /* write cmd */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2173 write_address(HOLDCS); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2174 for(i = 0; i<8; i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2175 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2176 write_spi(0xA5,HOLDCS);/* write data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2177 actualAddress++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2178 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2179 /* byte with RELEASE */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2180 write_spi(0xA5,RELEASE);/* write data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2181 actualAddress = actualAddressBackup; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2182 closeSectorAddress = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2183 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2184 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2185 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2186 uint32_t ext_flash_AnalyseSampleBuffer(char *pstrResult) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2187 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2188 uint8_t sectorState[16]; /* samples are stored in 16 sector / 64k each */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2189 uint32_t curAddress = SAMPLESTART; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2190 uint8_t curSector = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2191 uint8_t samplebuffer[10]; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2192 uint32_t actualAddressBackup = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2193 uint8_t emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2194 uint32_t i = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2195 uint8_t startedSectors = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2196 uint8_t lastSectorInuse = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2197 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2198 /* check if a sector is used till its end */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2199 for(curSector = 0; curSector < 16; curSector++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2200 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2201 sectorState[curSector] = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2202 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2203 curAddress = SAMPLESTART + (curSector * 0x10000); /* set address to begin of sector and check if it is used */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2204 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2205 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2206 for(uint32_t i=0;i<10;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2207 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2208 samplebuffer[i] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2209 if(samplebuffer[i] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2210 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2211 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2212 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2213 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2214 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2215 if(emptyCellCnt == 10) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2216 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2217 sectorState[curSector] = SECTOR_NOTUSED; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2218 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2219 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2220 curAddress = SAMPLESTART + (curSector * 0x10000) + 0xFFF5; /* set address to end of sector and check if it is used */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2221 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2222 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2223 for(i=0;i<10;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2224 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2225 samplebuffer[i] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2226 if(samplebuffer[i] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2227 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2228 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2229 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2230 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2231 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2232 if(emptyCellCnt == 10) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2233 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2234 sectorState[curSector] |= SECTOR_INUSE; /* will become SECTOR_EMPTY if start is NOTUSED */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2235 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2236 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2237 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2238 for(i=0;i<16;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2239 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2240 if( sectorState[i] == SECTOR_INUSE) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2241 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2242 startedSectors++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2243 lastSectorInuse = i; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2244 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2245 *(pstrResult+i) = sectorState[i] + 48; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2246 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2247 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2248 if(startedSectors > 1) /* more than one sector is in used => ring buffer corrupted */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2249 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2250 if(startedSectors == 2) /* only fix issue if only two sectors are in used. Otherwise fixing will cause more worries than help */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2251 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2252 /* the logic behind healing of the problem is that the larger address is the oldest one => restore the largest address */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2253 curAddress = SAMPLESTART + (lastSectorInuse * 0x10000); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2254 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2255 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2256 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2257 while((emptyCellCnt < 10) && (actualAddress < curAddress + 0x10000)) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2258 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2259 samplebuffer[0] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2260 if(samplebuffer[0] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2261 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2262 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2263 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2264 else |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2265 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2266 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2267 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2268 actualAddress++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2269 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2270 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2271 actualAddress -= 10; /* step 10 bytes back to the start of free bytes */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2272 actualPointerSample = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2273 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2274 closeSectorAddress = settingsGetPointer()->logFlashNextSampleStartAddress & 0xFFFF0000; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2275 closeSectorAddress += 0xFFF5; /* to be used once next time a dive is logged. Needed because NextSampleID is derived at every startup */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2276 settingsGetPointer()->logFlashNextSampleStartAddress = actualPointerSample; /* store new position to be used for next dive */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2277 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2278 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2279 actualAddress = actualAddressBackup; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2280 *(pstrResult+i) = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2281 return startedSectors; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2282 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2283 |
|
452
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2284 /* In case of a sample ring overrun the headers of the dive which will no longer have sample data needs to be updated */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2285 void ext_flash_invalidate_sample_index(uint32_t sectorStart) |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2286 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2287 uint8_t emptySamples[] = {0,0,0, 0,0,0, 0,0,0}; /* entry of start, stop and length */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2288 uint8_t diveidx; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2289 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2290 uint8_t header1, header2; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2291 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2292 SSettings *settings = settingsGetPointer(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2293 diveidx = settings->lastDiveLogId + 1; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2294 convert_Type dataStart, dataEnd; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2295 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2296 uint32_t HeaderAddrBackup = actualPointerHeader; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2297 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2298 while(diveidx != settings->lastDiveLogId) |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2299 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2300 actualAddress = HEADERSTART + (0x800 * diveidx) + HEADER2OFFSET; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2301 ext_flash_read_block_start(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2302 ext_flash_read_block(&header1, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2303 ext_flash_read_block(&header2, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2304 dataStart.u8bit.byteHigh = 0; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2305 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2306 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2307 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2308 dataEnd.u8bit.byteHigh = 0; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2309 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2310 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2311 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2312 ext_flash_read_block_stop(); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2313 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2314 if((header1 == 0xFA) && (header2 == 0xFA)) /* Dive ID is in use */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2315 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2316 if(((dataStart.u32bit >= sectorStart) && (dataStart.u32bit <= sectorStart+0xFFFF)) /* Sample start is within erased sector */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2317 || ((dataEnd.u32bit >= sectorStart) && (dataEnd.u32bit <= sectorStart+0xFFFF))) /* End of sample data is within erased sector */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2318 { |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2319 actualAddress = HEADERSTART + (0x800 * diveidx) + HEADER2OFFSET; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2320 ext_flash_incf_address(EF_HEADER); /* skip header bytes */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2321 ext_flash_incf_address(EF_HEADER); |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2322 actualPointerHeader = actualAddress; |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2323 ef_write_block(emptySamples,9,EF_HEADER,1); /* clear start, stop and length data */ |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2324 actualPointerHeader = HeaderAddrBackup; |
|
459
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
2325 } |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
2326 } |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
2327 diveidx++; |
|
7ac0e76dbd6a
Activated reset of sample information within header data at time of sector erasing:
ideenmodellierer
parents:
452
diff
changeset
|
2328 } |
|
452
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2329 } |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2330 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2331 |
|
b90ddf57f7f1
Added compile variant enabling the reset of profile sample information:
ideenmodellierer
parents:
429
diff
changeset
|
2332 |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2333 /* |
| 38 | 2334 uint8_t ext_flash_erase_firmware_if_not_empty(void) |
| 2335 { | |
| 2336 const uint8_t TESTSIZE_FW = 4; | |
| 2337 | |
| 2338 uint8_t data[TESTSIZE_FW]; | |
| 2339 uint8_t notEmpty = 0; | |
| 2340 | |
| 2341 actualAddress = FWSTART; | |
| 2342 ext_flash_read_block_start(); | |
| 2343 for(int i = 0; i < TESTSIZE_FW; i++) | |
| 2344 { | |
| 2345 ext_flash_read_block(&data[i], EF_FIRMWARE); | |
| 2346 if(data[i] != 0xFF) | |
| 2347 notEmpty = 1; | |
| 2348 } | |
| 2349 ext_flash_read_block_stop(); | |
| 2350 | |
| 2351 if(notEmpty) | |
| 2352 { | |
| 2353 ext_flash_erase_firmware(); | |
| 2354 return 1; | |
| 2355 } | |
| 2356 else | |
| 2357 return 0; | |
| 2358 } | |
| 2359 | |
| 2360 uint8_t ext_flash_erase_firmware2_if_not_empty(void) | |
| 2361 { | |
| 2362 const uint8_t TESTSIZE_FW = 4; | |
| 2363 | |
| 2364 uint8_t data[TESTSIZE_FW]; | |
| 2365 uint8_t notEmpty = 0; | |
| 2366 | |
| 2367 actualAddress = FWSTART2; | |
| 2368 ext_flash_read_block_start(); | |
| 2369 for(int i = 0; i < TESTSIZE_FW; i++) | |
| 2370 { | |
| 2371 ext_flash_read_block(&data[i], EF_FIRMWARE2); | |
| 2372 if(data[i] != 0xFF) | |
| 2373 notEmpty = 1; | |
| 2374 } | |
| 2375 ext_flash_read_block_stop(); | |
| 2376 | |
| 2377 if(notEmpty) | |
| 2378 { | |
| 2379 ext_flash_erase_firmware2(); | |
| 2380 return 1; | |
| 2381 } | |
| 2382 else | |
| 2383 return 0; | |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2384 }*/ |