38
|
1 /**
|
|
2 ******************************************************************************
|
|
3 * @file stm32f4xx_hal_rtc_ex.h
|
|
4 * @author MCD Application Team
|
|
5 * @version V1.2.0
|
|
6 * @date 26-December-2014
|
|
7 * @brief Header file of RTC HAL Extension module.
|
|
8 ******************************************************************************
|
|
9 * @attention
|
|
10 *
|
|
11 * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
12 *
|
|
13 * Redistribution and use in source and binary forms, with or without modification,
|
|
14 * are permitted provided that the following conditions are met:
|
|
15 * 1. Redistributions of source code must retain the above copyright notice,
|
|
16 * this list of conditions and the following disclaimer.
|
|
17 * 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
18 * this list of conditions and the following disclaimer in the documentation
|
|
19 * and/or other materials provided with the distribution.
|
|
20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
21 * may be used to endorse or promote products derived from this software
|
|
22 * without specific prior written permission.
|
|
23 *
|
|
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
34 *
|
|
35 ******************************************************************************
|
|
36 */
|
|
37
|
|
38 /* Define to prevent recursive inclusion -------------------------------------*/
|
|
39 #ifndef __STM32F4xx_HAL_RTC_EX_H
|
|
40 #define __STM32F4xx_HAL_RTC_EX_H
|
|
41
|
|
42 #ifdef __cplusplus
|
|
43 extern "C" {
|
|
44 #endif
|
|
45
|
|
46 /* Includes ------------------------------------------------------------------*/
|
|
47 #include "stm32f4xx_hal_def.h"
|
|
48
|
|
49 /** @addtogroup STM32F4xx_HAL_Driver
|
|
50 * @{
|
|
51 */
|
|
52
|
|
53 /** @addtogroup RTCEx
|
|
54 * @{
|
|
55 */
|
|
56
|
|
57 /* Exported types ------------------------------------------------------------*/
|
|
58 /** @defgroup RTCEx_Exported_Types RTCEx Exported Types
|
|
59 * @{
|
|
60 */
|
|
61
|
|
62 /**
|
|
63 * @brief RTC Tamper structure definition
|
|
64 */
|
|
65 typedef struct
|
|
66 {
|
|
67 uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
|
68 This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
|
69
|
|
70 uint32_t PinSelection; /*!< Specifies the Tamper Pin.
|
|
71 This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
|
|
72
|
|
73 uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
|
74 This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
|
75
|
|
76 uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
|
|
77 This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
|
|
78
|
|
79 uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
|
|
80 This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
|
|
81
|
|
82 uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
|
|
83 This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
|
|
84
|
|
85 uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
|
|
86 This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
|
|
87
|
|
88 uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
|
|
89 This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
|
|
90 }RTC_TamperTypeDef;
|
|
91 /**
|
|
92 * @}
|
|
93 */
|
|
94
|
|
95 /* Exported constants --------------------------------------------------------*/
|
|
96 /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
|
|
97 * @{
|
|
98 */
|
|
99
|
|
100 /** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
|
|
101 * @{
|
|
102 */
|
|
103 #define RTC_BKP_DR0 ((uint32_t)0x00000000)
|
|
104 #define RTC_BKP_DR1 ((uint32_t)0x00000001)
|
|
105 #define RTC_BKP_DR2 ((uint32_t)0x00000002)
|
|
106 #define RTC_BKP_DR3 ((uint32_t)0x00000003)
|
|
107 #define RTC_BKP_DR4 ((uint32_t)0x00000004)
|
|
108 #define RTC_BKP_DR5 ((uint32_t)0x00000005)
|
|
109 #define RTC_BKP_DR6 ((uint32_t)0x00000006)
|
|
110 #define RTC_BKP_DR7 ((uint32_t)0x00000007)
|
|
111 #define RTC_BKP_DR8 ((uint32_t)0x00000008)
|
|
112 #define RTC_BKP_DR9 ((uint32_t)0x00000009)
|
|
113 #define RTC_BKP_DR10 ((uint32_t)0x0000000A)
|
|
114 #define RTC_BKP_DR11 ((uint32_t)0x0000000B)
|
|
115 #define RTC_BKP_DR12 ((uint32_t)0x0000000C)
|
|
116 #define RTC_BKP_DR13 ((uint32_t)0x0000000D)
|
|
117 #define RTC_BKP_DR14 ((uint32_t)0x0000000E)
|
|
118 #define RTC_BKP_DR15 ((uint32_t)0x0000000F)
|
|
119 #define RTC_BKP_DR16 ((uint32_t)0x00000010)
|
|
120 #define RTC_BKP_DR17 ((uint32_t)0x00000011)
|
|
121 #define RTC_BKP_DR18 ((uint32_t)0x00000012)
|
|
122 #define RTC_BKP_DR19 ((uint32_t)0x00000013)
|
|
123 /**
|
|
124 * @}
|
|
125 */
|
|
126
|
|
127 /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
|
|
128 * @{
|
|
129 */
|
|
130 #define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
|
|
131 #define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
|
|
132 /**
|
|
133 * @}
|
|
134 */
|
|
135
|
|
136 /** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
|
|
137 * @{
|
|
138 */
|
|
139 #define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
|
|
140 #define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
|
|
141 /**
|
|
142 * @}
|
|
143 */
|
|
144
|
|
145 /** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
|
|
146 * @{
|
|
147 */
|
|
148 #define RTC_TAMPERPIN_PC13 ((uint32_t)0x00000000)
|
|
149 #define RTC_TAMPERPIN_PI8 ((uint32_t)0x00010000)
|
|
150 /**
|
|
151 * @}
|
|
152 */
|
|
153
|
|
154 /** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
|
|
155 * @{
|
|
156 */
|
|
157 #define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
|
|
158 #define RTC_TIMESTAMPPIN_PI8 ((uint32_t)0x00020000)
|
|
159 /**
|
|
160 * @}
|
|
161 */
|
|
162
|
|
163 /** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
|
|
164 * @{
|
|
165 */
|
|
166 #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
|
|
167 #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
|
|
168 #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
|
|
169 #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
|
|
170 /**
|
|
171 * @}
|
|
172 */
|
|
173
|
|
174 /** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
|
|
175 * @{
|
|
176 */
|
|
177 #define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
|
|
178
|
|
179 #define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
|
|
180 consecutive samples at the active level */
|
|
181 #define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
|
|
182 consecutive samples at the active level */
|
|
183 #define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
|
|
184 consecutive samples at the active level. */
|
|
185 /**
|
|
186 * @}
|
|
187 */
|
|
188
|
|
189 /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
|
|
190 * @{
|
|
191 */
|
|
192 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
|
|
193 with a frequency = RTCCLK / 32768 */
|
|
194 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
|
|
195 with a frequency = RTCCLK / 16384 */
|
|
196 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
|
|
197 with a frequency = RTCCLK / 8192 */
|
|
198 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
|
|
199 with a frequency = RTCCLK / 4096 */
|
|
200 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
|
|
201 with a frequency = RTCCLK / 2048 */
|
|
202 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
|
|
203 with a frequency = RTCCLK / 1024 */
|
|
204 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
|
|
205 with a frequency = RTCCLK / 512 */
|
|
206 #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
|
|
207 with a frequency = RTCCLK / 256 */
|
|
208 /**
|
|
209 * @}
|
|
210 */
|
|
211
|
|
212 /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
|
|
213 * @{
|
|
214 */
|
|
215 #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
|
|
216 sampling during 1 RTCCLK cycle */
|
|
217 #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
|
|
218 sampling during 2 RTCCLK cycles */
|
|
219 #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
|
|
220 sampling during 4 RTCCLK cycles */
|
|
221 #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
|
|
222 sampling during 8 RTCCLK cycles */
|
|
223 /**
|
|
224 * @}
|
|
225 */
|
|
226
|
|
227 /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
|
|
228 * @{
|
|
229 */
|
|
230 #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
|
|
231 #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
|
|
232 /**
|
|
233 * @}
|
|
234 */
|
|
235
|
|
236 /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
|
|
237 * @{
|
|
238 */
|
|
239 #define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
|
|
240 #define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
|
|
241 /**
|
|
242 * @}
|
|
243 */
|
|
244
|
|
245 /** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
|
|
246 * @{
|
|
247 */
|
|
248 #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
|
|
249 #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
|
|
250 #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
|
|
251 #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
|
|
252 #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
|
|
253 #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
|
|
254 /**
|
|
255 * @}
|
|
256 */
|
|
257
|
|
258 /** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
|
|
259 * @{
|
|
260 */
|
|
261 #define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
|
|
262 #define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
|
|
263 /**
|
|
264 * @}
|
|
265 */
|
|
266
|
|
267 /** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
|
|
268 * @{
|
|
269 */
|
|
270 #define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
271 period is 32s, else 2exp20 RTCCLK seconds */
|
|
272 #define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
273 period is 16s, else 2exp19 RTCCLK seconds */
|
|
274 #define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
275 period is 8s, else 2exp18 RTCCLK seconds */
|
|
276 /**
|
|
277 * @}
|
|
278 */
|
|
279
|
|
280 /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
|
|
281 * @{
|
|
282 */
|
|
283 #define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
|
|
284 during a X -second window = Y - CALM[8:0]
|
|
285 with Y = 512, 256, 128 when X = 32, 16, 8 */
|
|
286 #define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
|
|
287 during a 32-second window = CALM[8:0] */
|
|
288 /**
|
|
289 * @}
|
|
290 */
|
|
291
|
|
292 /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
|
|
293 * @{
|
|
294 */
|
|
295 #define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
|
|
296 #define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
|
|
297 /**
|
|
298 * @}
|
|
299 */
|
|
300
|
|
301
|
|
302 /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
|
|
303 * @{
|
|
304 */
|
|
305 #define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
|
|
306 #define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
|
|
307 /**
|
|
308 * @}
|
|
309 */
|
|
310
|
|
311 /**
|
|
312 * @}
|
|
313 */
|
|
314
|
|
315 /* Exported macro ------------------------------------------------------------*/
|
|
316 /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
|
|
317 * @{
|
|
318 */
|
|
319
|
|
320 /* ---------------------------------WAKEUPTIMER---------------------------------*/
|
|
321 /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
|
|
322 * @{
|
|
323 */
|
|
324
|
|
325 /**
|
|
326 * @brief Enable the RTC WakeUp Timer peripheral.
|
|
327 * @param __HANDLE__: specifies the RTC handle.
|
|
328 * @retval None
|
|
329 */
|
|
330 #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
|
331
|
|
332 /**
|
|
333 * @brief Disable the RTC Wake-up Timer peripheral.
|
|
334 * @param __HANDLE__: specifies the RTC handle.
|
|
335 * @retval None
|
|
336 */
|
|
337 #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
|
338
|
|
339 /**
|
|
340 * @brief Enable the RTC WakeUpTimer interrupt.
|
|
341 * @param __HANDLE__: specifies the RTC handle.
|
|
342 * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
|
343 * This parameter can be:
|
|
344 * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
345 * @retval None
|
|
346 */
|
|
347 #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
348
|
|
349 /**
|
|
350 * @brief Disable the RTC WakeUpTimer interrupt.
|
|
351 * @param __HANDLE__: specifies the RTC handle.
|
|
352 * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
|
353 * This parameter can be:
|
|
354 * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
355 * @retval None
|
|
356 */
|
|
357 #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
358
|
|
359 /**
|
|
360 * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
|
361 * @param __HANDLE__: specifies the RTC handle.
|
|
362 * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
|
|
363 * This parameter can be:
|
|
364 * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
365 * @retval None
|
|
366 */
|
|
367 #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
|
368
|
|
369 /**
|
|
370 * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
|
|
371 * @param __HANDLE__: specifies the RTC handle.
|
|
372 * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
|
|
373 * This parameter can be:
|
|
374 * @arg RTC_IT_WUT: WakeUpTimer interrupt
|
|
375 * @retval None
|
|
376 */
|
|
377 #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
378
|
|
379 /**
|
|
380 * @brief Get the selected RTC WakeUpTimer's flag status.
|
|
381 * @param __HANDLE__: specifies the RTC handle.
|
|
382 * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check.
|
|
383 * This parameter can be:
|
|
384 * @arg RTC_FLAG_WUTF
|
|
385 * @arg RTC_FLAG_WUTWF
|
|
386 * @retval None
|
|
387 */
|
|
388 #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
389
|
|
390 /**
|
|
391 * @brief Clear the RTC Wake Up timer's pending flags.
|
|
392 * @param __HANDLE__: specifies the RTC handle.
|
|
393 * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
394 * This parameter can be:
|
|
395 * @arg RTC_FLAG_WUTF
|
|
396 * @retval None
|
|
397 */
|
|
398 #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
399
|
|
400 /**
|
|
401 * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
|
|
402 * @retval None
|
|
403 */
|
|
404 #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
405
|
|
406 /**
|
|
407 * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
|
|
408 * @retval None
|
|
409 */
|
|
410 #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
411
|
|
412 /**
|
|
413 * @brief Enable event on the RTC Wake-up Timer associated Exti line.
|
|
414 * @retval None.
|
|
415 */
|
|
416 #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
417
|
|
418 /**
|
|
419 * @brief Disable event on the RTC Wake-up Timer associated Exti line.
|
|
420 * @retval None.
|
|
421 */
|
|
422 #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
423
|
|
424 /**
|
|
425 * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
426 * @retval None.
|
|
427 */
|
|
428 #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
429
|
|
430 /**
|
|
431 * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
432 * @retval None.
|
|
433 */
|
|
434 #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
435
|
|
436 /**
|
|
437 * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
438 * @retval None.
|
|
439 */
|
|
440 #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
441
|
|
442 /**
|
|
443 * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
444 * @retval None.
|
|
445 */
|
|
446 #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
447
|
|
448 /**
|
|
449 * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
450 * @retval None.
|
|
451 */
|
|
452 #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
|
|
453
|
|
454 /**
|
|
455 * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
|
456 * This parameter can be:
|
|
457 * @retval None.
|
|
458 */
|
|
459 #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
|
|
460
|
|
461 /**
|
|
462 * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
|
|
463 * @retval Line Status.
|
|
464 */
|
|
465 #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
466
|
|
467 /**
|
|
468 * @brief Clear the RTC Wake-up Timer associated Exti line flag.
|
|
469 * @retval None.
|
|
470 */
|
|
471 #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
472
|
|
473 /**
|
|
474 * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
|
|
475 * @retval None.
|
|
476 */
|
|
477 #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
478
|
|
479 /**
|
|
480 * @}
|
|
481 */
|
|
482
|
|
483 /* ---------------------------------TIMESTAMP---------------------------------*/
|
|
484 /** @defgroup RTCEx_Timestamp RTC Timestamp
|
|
485 * @{
|
|
486 */
|
|
487
|
|
488 /**
|
|
489 * @brief Enable the RTC TimeStamp peripheral.
|
|
490 * @param __HANDLE__: specifies the RTC handle.
|
|
491 * @retval None
|
|
492 */
|
|
493 #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
|
494
|
|
495 /**
|
|
496 * @brief Disable the RTC TimeStamp peripheral.
|
|
497 * @param __HANDLE__: specifies the RTC handle.
|
|
498 * @retval None
|
|
499 */
|
|
500 #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
|
501
|
|
502 /**
|
|
503 * @brief Enable the RTC TimeStamp interrupt.
|
|
504 * @param __HANDLE__: specifies the RTC handle.
|
|
505 * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
|
506 * This parameter can be:
|
|
507 * @arg RTC_IT_TS: TimeStamp interrupt
|
|
508 * @retval None
|
|
509 */
|
|
510 #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
511
|
|
512 /**
|
|
513 * @brief Disable the RTC TimeStamp interrupt.
|
|
514 * @param __HANDLE__: specifies the RTC handle.
|
|
515 * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
|
516 * This parameter can be:
|
|
517 * @arg RTC_IT_TS: TimeStamp interrupt
|
|
518 * @retval None
|
|
519 */
|
|
520 #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
521
|
|
522 /**
|
|
523 * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
|
524 * @param __HANDLE__: specifies the RTC handle.
|
|
525 * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
|
|
526 * This parameter can be:
|
|
527 * @arg RTC_IT_TS: TimeStamp interrupt
|
|
528 * @retval None
|
|
529 */
|
|
530 #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
|
531
|
|
532 /**
|
|
533 * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
|
|
534 * @param __HANDLE__: specifies the RTC handle.
|
|
535 * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
|
|
536 * This parameter can be:
|
|
537 * @arg RTC_IT_TS: TimeStamp interrupt
|
|
538 * @retval None
|
|
539 */
|
|
540 #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
541
|
|
542 /**
|
|
543 * @brief Get the selected RTC TimeStamp's flag status.
|
|
544 * @param __HANDLE__: specifies the RTC handle.
|
|
545 * @param __FLAG__: specifies the RTC TimeStamp flag to check.
|
|
546 * This parameter can be:
|
|
547 * @arg RTC_FLAG_TSF
|
|
548 * @arg RTC_FLAG_TSOVF
|
|
549 * @retval None
|
|
550 */
|
|
551 #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
552
|
|
553 /**
|
|
554 * @brief Clear the RTC Time Stamp's pending flags.
|
|
555 * @param __HANDLE__: specifies the RTC handle.
|
|
556 * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
|
|
557 * This parameter can be:
|
|
558 * @arg RTC_FLAG_TSF
|
|
559 * @retval None
|
|
560 */
|
|
561 #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
562
|
|
563 /**
|
|
564 * @}
|
|
565 */
|
|
566
|
|
567 /* ---------------------------------TAMPER------------------------------------*/
|
|
568 /** @defgroup RTCEx_Tamper RTC Tamper
|
|
569 * @{
|
|
570 */
|
|
571
|
|
572 /**
|
|
573 * @brief Enable the RTC Tamper1 input detection.
|
|
574 * @param __HANDLE__: specifies the RTC handle.
|
|
575 * @retval None
|
|
576 */
|
|
577 #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
|
|
578
|
|
579 /**
|
|
580 * @brief Disable the RTC Tamper1 input detection.
|
|
581 * @param __HANDLE__: specifies the RTC handle.
|
|
582 * @retval None
|
|
583 */
|
|
584 #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
|
|
585
|
|
586 /**
|
|
587 * @brief Enable the RTC Tamper2 input detection.
|
|
588 * @param __HANDLE__: specifies the RTC handle.
|
|
589 * @retval None
|
|
590 */
|
|
591 #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
|
|
592
|
|
593 /**
|
|
594 * @brief Disable the RTC Tamper2 input detection.
|
|
595 * @param __HANDLE__: specifies the RTC handle.
|
|
596 * @retval None
|
|
597 */
|
|
598 #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
|
|
599
|
|
600 /**
|
|
601 * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
|
602 * @param __HANDLE__: specifies the RTC handle.
|
|
603 * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
|
|
604 * This parameter can be:
|
|
605 * @arg RTC_IT_TAMP1
|
|
606 * @arg RTC_IT_TAMP2
|
|
607 * @retval None
|
|
608 */
|
|
609 #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
|
610
|
|
611 /**
|
|
612 * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
|
|
613 * @param __HANDLE__: specifies the RTC handle.
|
|
614 * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
|
|
615 * This parameter can be:
|
|
616 * @arg RTC_IT_TAMP: Tamper interrupt
|
|
617 * @retval None
|
|
618 */
|
|
619 #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
620
|
|
621 /**
|
|
622 * @brief Get the selected RTC Tamper's flag status.
|
|
623 * @param __HANDLE__: specifies the RTC handle.
|
|
624 * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
625 * This parameter can be:
|
|
626 * @arg RTC_FLAG_TAMP1F
|
|
627 * @arg RTC_FLAG_TAMP2F
|
|
628 * @retval None
|
|
629 */
|
|
630 #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
631
|
|
632 /**
|
|
633 * @brief Clear the RTC Tamper's pending flags.
|
|
634 * @param __HANDLE__: specifies the RTC handle.
|
|
635 * @param __FLAG__: specifies the RTC Tamper Flag to clear.
|
|
636 * This parameter can be:
|
|
637 * @arg RTC_FLAG_TAMP1F
|
|
638 * @arg RTC_FLAG_TAMP2F
|
|
639 * @retval None
|
|
640 */
|
|
641 #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
642 /**
|
|
643 * @}
|
|
644 */
|
|
645
|
|
646 /* --------------------------TAMPER/TIMESTAMP---------------------------------*/
|
|
647 /** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
|
|
648 * @{
|
|
649 */
|
|
650
|
|
651 /**
|
|
652 * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
|
653 * @retval None
|
|
654 */
|
|
655 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
656
|
|
657 /**
|
|
658 * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
|
659 * @retval None
|
|
660 */
|
|
661 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
662
|
|
663 /**
|
|
664 * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
|
|
665 * @retval None.
|
|
666 */
|
|
667 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
668
|
|
669 /**
|
|
670 * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
|
|
671 * @retval None.
|
|
672 */
|
|
673 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
674
|
|
675 /**
|
|
676 * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
677 * @retval None.
|
|
678 */
|
|
679 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
680
|
|
681 /**
|
|
682 * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
683 * @retval None.
|
|
684 */
|
|
685 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
686
|
|
687 /**
|
|
688 * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
689 * @retval None.
|
|
690 */
|
|
691 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
692
|
|
693 /**
|
|
694 * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
695 * @retval None.
|
|
696 */
|
|
697 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
698
|
|
699 /**
|
|
700 * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
701 * @retval None.
|
|
702 */
|
|
703 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
|
|
704
|
|
705 /**
|
|
706 * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
707 * This parameter can be:
|
|
708 * @retval None.
|
|
709 */
|
|
710 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
|
|
711
|
|
712 /**
|
|
713 * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
|
|
714 * @retval Line Status.
|
|
715 */
|
|
716 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
717
|
|
718 /**
|
|
719 * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
|
|
720 * @retval None.
|
|
721 */
|
|
722 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
723
|
|
724 /**
|
|
725 * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
|
|
726 * @retval None.
|
|
727 */
|
|
728 #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
729 /**
|
|
730 * @}
|
|
731 */
|
|
732
|
|
733 /* ------------------------------Calibration----------------------------------*/
|
|
734 /** @defgroup RTCEx_Calibration RTC Calibration
|
|
735 * @{
|
|
736 */
|
|
737
|
|
738 /**
|
|
739 * @brief Enable the Coarse calibration process.
|
|
740 * @param __HANDLE__: specifies the RTC handle.
|
|
741 * @retval None
|
|
742 */
|
|
743 #define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
|
|
744
|
|
745 /**
|
|
746 * @brief Disable the Coarse calibration process.
|
|
747 * @param __HANDLE__: specifies the RTC handle.
|
|
748 * @retval None
|
|
749 */
|
|
750 #define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
|
|
751
|
|
752 /**
|
|
753 * @brief Enable the RTC calibration output.
|
|
754 * @param __HANDLE__: specifies the RTC handle.
|
|
755 * @retval None
|
|
756 */
|
|
757 #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
|
758
|
|
759 /**
|
|
760 * @brief Disable the calibration output.
|
|
761 * @param __HANDLE__: specifies the RTC handle.
|
|
762 * @retval None
|
|
763 */
|
|
764 #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
|
765
|
|
766 /**
|
|
767 * @brief Enable the clock reference detection.
|
|
768 * @param __HANDLE__: specifies the RTC handle.
|
|
769 * @retval None
|
|
770 */
|
|
771 #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
|
772
|
|
773 /**
|
|
774 * @brief Disable the clock reference detection.
|
|
775 * @param __HANDLE__: specifies the RTC handle.
|
|
776 * @retval None
|
|
777 */
|
|
778 #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
|
779
|
|
780 /**
|
|
781 * @brief Get the selected RTC shift operation's flag status.
|
|
782 * @param __HANDLE__: specifies the RTC handle.
|
|
783 * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
|
|
784 * This parameter can be:
|
|
785 * @arg RTC_FLAG_SHPF
|
|
786 * @retval None
|
|
787 */
|
|
788 #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
789 /**
|
|
790 * @}
|
|
791 */
|
|
792
|
|
793 /**
|
|
794 * @}
|
|
795 */
|
|
796
|
|
797 /* Exported functions --------------------------------------------------------*/
|
|
798 /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
|
|
799 * @{
|
|
800 */
|
|
801
|
|
802 /** @addtogroup RTCEx_Exported_Functions_Group1
|
|
803 * @{
|
|
804 */
|
|
805 /* RTC TimeStamp and Tamper functions *****************************************/
|
|
806 HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
807 HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
808 HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
|
809 HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
|
810
|
|
811 HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
812 HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
813 HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
|
814 void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
815
|
|
816 void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
|
817 void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
|
|
818 void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
|
819 HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
820 HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
821 HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
822 /**
|
|
823 * @}
|
|
824 */
|
|
825
|
|
826 /** @addtogroup RTCEx_Exported_Functions_Group2
|
|
827 * @{
|
|
828 */
|
|
829 /* RTC Wake-up functions ******************************************************/
|
|
830 HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
831 HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
832 uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
833 uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
834 void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
835 void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
|
836 HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
837 /**
|
|
838 * @}
|
|
839 */
|
|
840
|
|
841 /** @addtogroup RTCEx_Exported_Functions_Group3
|
|
842 * @{
|
|
843 */
|
|
844 /* Extension Control functions ************************************************/
|
|
845 void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
|
846 uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
|
847
|
|
848 HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
|
|
849 HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
|
|
850 HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
|
|
851 HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
|
|
852 HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
|
|
853 HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
|
854 HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
|
855 HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
|
856 HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
857 HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
858 /**
|
|
859 * @}
|
|
860 */
|
|
861
|
|
862 /** @addtogroup RTCEx_Exported_Functions_Group4
|
|
863 * @{
|
|
864 */
|
|
865 /* Extension RTC features functions *******************************************/
|
|
866 void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
|
867 HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
868 /**
|
|
869 * @}
|
|
870 */
|
|
871
|
|
872 /**
|
|
873 * @}
|
|
874 */
|
|
875
|
|
876 /* Private types -------------------------------------------------------------*/
|
|
877 /* Private variables ---------------------------------------------------------*/
|
|
878 /* Private constants ---------------------------------------------------------*/
|
|
879 /** @defgroup RTCEx_Private_Constants RTCEx Private Constants
|
|
880 * @{
|
|
881 */
|
|
882 #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
|
883 #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
|
|
884 /**
|
|
885 * @}
|
|
886 */
|
|
887
|
|
888 /* Private macros ------------------------------------------------------------*/
|
|
889 /** @defgroup RTCEx_Private_Macros RTCEx Private Macros
|
|
890 * @{
|
|
891 */
|
|
892
|
|
893 /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
|
894 * @{
|
|
895 */
|
|
896 #define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
|
|
897 ((BKP) == RTC_BKP_DR1) || \
|
|
898 ((BKP) == RTC_BKP_DR2) || \
|
|
899 ((BKP) == RTC_BKP_DR3) || \
|
|
900 ((BKP) == RTC_BKP_DR4) || \
|
|
901 ((BKP) == RTC_BKP_DR5) || \
|
|
902 ((BKP) == RTC_BKP_DR6) || \
|
|
903 ((BKP) == RTC_BKP_DR7) || \
|
|
904 ((BKP) == RTC_BKP_DR8) || \
|
|
905 ((BKP) == RTC_BKP_DR9) || \
|
|
906 ((BKP) == RTC_BKP_DR10) || \
|
|
907 ((BKP) == RTC_BKP_DR11) || \
|
|
908 ((BKP) == RTC_BKP_DR12) || \
|
|
909 ((BKP) == RTC_BKP_DR13) || \
|
|
910 ((BKP) == RTC_BKP_DR14) || \
|
|
911 ((BKP) == RTC_BKP_DR15) || \
|
|
912 ((BKP) == RTC_BKP_DR16) || \
|
|
913 ((BKP) == RTC_BKP_DR17) || \
|
|
914 ((BKP) == RTC_BKP_DR18) || \
|
|
915 ((BKP) == RTC_BKP_DR19))
|
|
916 #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
|
|
917 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
|
|
918 #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
|
|
919 #define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
|
|
920 ((PIN) == RTC_TAMPERPIN_PI8))
|
|
921 #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
|
|
922 ((PIN) == RTC_TIMESTAMPPIN_PI8))
|
|
923 #define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
|
924 ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
|
|
925 ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
|
|
926 ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
|
|
927 #define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
|
|
928 ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
|
|
929 ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
|
|
930 ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
|
|
931 #define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
|
|
932 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
|
|
933 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
|
|
934 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
|
|
935 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
|
|
936 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
|
|
937 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
|
|
938 ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
|
|
939 #define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
|
|
940 ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
|
|
941 ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
|
|
942 ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
|
|
943 #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
|
|
944 ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
|
|
945 #define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
|
|
946 ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
|
|
947 #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
|
948 ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
|
949 ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
|
950 ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
|
951 ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
|
952 ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
|
953
|
|
954 #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
|
|
955 #define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
|
|
956 ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
|
|
957
|
|
958 #define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
|
|
959
|
|
960 #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
|
|
961 ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
|
|
962 ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
|
|
963 #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
|
|
964 ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
|
|
965
|
|
966
|
|
967 #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
|
|
968 #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
|
|
969 ((SEL) == RTC_SHIFTADD1S_SET))
|
|
970 #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
|
|
971 #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
|
|
972 ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
|
|
973 /**
|
|
974 * @}
|
|
975 */
|
|
976
|
|
977 /**
|
|
978 * @}
|
|
979 */
|
|
980
|
|
981 /**
|
|
982 * @}
|
|
983 */
|
|
984
|
|
985 /**
|
|
986 * @}
|
|
987 */
|
|
988
|
|
989 #ifdef __cplusplus
|
|
990 }
|
|
991 #endif
|
|
992
|
|
993 #endif /* __STM32F4xx_HAL_RTC_EX_H */
|
|
994
|
|
995 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|