Mercurial > public > ostc4
annotate Small_CPU/Inc/uart.h @ 731:2a801cfe23ab
Improvment sensor Autodetection:
The sensor type optical has been introduce to enable the OSTC to completly switch of the external interface (voltage + ADC operation) The optical interface is handled via firmware. In addition some states have been added to reset the external power supply and to provide the ADC more time to do its conversation.
author | Ideenmodellierer |
---|---|
date | Sun, 15 Jan 2023 21:43:33 +0100 |
parents | d646a0f724a7 |
children | e23fe82cbf8c |
rev | line source |
---|---|
38 | 1 /** |
2 ****************************************************************************** | |
3 * @file uart.h | |
4 * @author heinrichs weikamp gmbh | |
5 * @version V0.0.1 | |
6 * @date 27-March-2014 | |
7 * @brief button control | |
8 * | |
9 ****************************************************************************** | |
10 * @attention | |
11 * | |
12 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
13 * | |
14 ****************************************************************************** | |
15 */ | |
16 | |
17 /* Define to prevent recursive inclusion -------------------------------------*/ | |
18 #ifndef UART_H | |
19 #define UART_H | |
20 | |
21 #ifdef __cplusplus | |
22 extern "C" { | |
23 #endif | |
24 | |
25 #include "stm32f4xx_hal.h" | |
26 | |
662 | 27 |
28 typedef enum | |
29 { | |
30 RX_Ready= 0, /* Initial state */ | |
690 | 31 RX_DetectStart, /* validate start byte */ |
32 RX_SelectData, /* Data contained in this frame */ | |
662 | 33 RX_Data0, /* Process incoming data */ |
34 RX_Data1, | |
35 RX_Data2, | |
36 RX_Data3, | |
37 RX_Data4, | |
690 | 38 RX_Data5, |
39 RX_Data6, | |
40 RX_Data7, | |
41 RX_Data8, | |
42 RX_Data9, | |
43 RX_Data10, | |
44 RX_Data11, | |
45 RX_Data12, | |
662 | 46 RX_DataComplete |
47 } receiveState_t; | |
48 | |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
49 typedef enum |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
50 { |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
51 UART_O2_INIT = 0, |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
52 UART_O2_CHECK, /* send blink command and check if sensor answers */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
53 UART_O2_REQ_INFO, /* request information about available internal sensors of sensor */ |
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
704
diff
changeset
|
54 UART_O2_REQ_ID, /* request ID of sensor */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
55 UART_O2_IDLE, /* sensor detected and no communication pending */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
56 UART_O2_REQ_O2, /* O2 value has been requested and is in receiption progress */ |
721 | 57 UART_O2_REQ_RAW, /* Request O2 and extended raw data */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
58 UART_O2_ERROR /* Error state which could not be resolved => only exit via de-/activation cycle */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
59 } uartO2Status_t; |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
60 |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
61 |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
62 typedef enum |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
63 { |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
64 O2RX_IDLE = 0, /* no reception pending */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
65 O2RX_CONFIRM, /* check the command echo */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
66 O2RX_GETNR, /* extract the sensor number */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
67 O2RX_GETO2, /* extract the ppo2 */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
68 O2RX_GETTEMP, /* extract the temperature */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
69 O2RX_GETSTATUS, /* extract the sensor status */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
70 O2RX_GETTYPE, /* extract the sensor type (should be 8) */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
71 O2RX_GETCHANNEL, /* extract the number of sensor channels (should be 1) */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
72 O2RX_GETVERSION, /* extract the sensor version */ |
721 | 73 O2RX_GETSUBSENSORS, /* extract the available measures (O2, temperature, humidity etc) */ |
74 O2RX_GETDPHI, /* extract phase shift */ | |
75 O2RX_INTENSITY, /* extract intensity of signal */ | |
76 O2RX_AMBIENTLIGHT, /* extract the intensity of the ambient light */ | |
77 O2RX_PRESSURE, /* extract pressor within the sensor housing */ | |
78 O2RX_HUMIDITY /* extract humidity within the sensor housing */ | |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
79 } uartO2RxState_t; |
662 | 80 |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
81 |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
82 |
662 | 83 void MX_USART1_UART_Init(void); |
84 void MX_USART1_UART_DeInit(void); | |
85 void MX_USART1_DMA_Init(void); | |
38 | 86 uint8_t UART_ButtonAdjust(uint8_t *array); |
690 | 87 #ifdef ENABLE_CO2_SUPPORT |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
88 void UART_HandleCO2Data(void); |
690 | 89 #endif |
90 #ifdef ENABLE_SENTINEL_MODE | |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
91 void UART_HandleSentinelData(void); |
690 | 92 #endif |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
93 void UART_HandleDigitalO2(void); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
94 |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
95 uint8_t UART_isDigO2Connected(); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
96 uint8_t UART_isCO2Connected(); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
97 void UART_setTargetChannel(uint8_t channel); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
98 |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
99 |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
100 |
38 | 101 #ifdef __cplusplus |
102 } | |
103 #endif | |
104 | |
105 #endif /* UART_H */ | |
106 | |
107 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |