38
+ − 1 ///////////////////////////////////////////////////////////////////////////////
+ − 2 /// -*- coding: UTF-8 -*-
+ − 3 ///
+ − 4 /// \file Discovery/Inc/stm32f4xx_hal_conf.h
+ − 5 /// \brief The assert_param macro is used for function's parameters check.
+ − 6 /// \author Heinrichs Weikamp
+ − 7 /// \date 2018
+ − 8 ///
+ − 9 /// $Id$
+ − 10 ///////////////////////////////////////////////////////////////////////////////
+ − 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
+ − 12 ///
+ − 13 /// This program is free software: you can redistribute it and/or modify
+ − 14 /// it under the terms of the GNU General Public License as published by
+ − 15 /// the Free Software Foundation, either version 3 of the License, or
+ − 16 /// (at your option) any later version.
+ − 17 ///
+ − 18 /// This program is distributed in the hope that it will be useful,
+ − 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of
+ − 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ − 21 /// GNU General Public License for more details.
+ − 22 ///
+ − 23 /// You should have received a copy of the GNU General Public License
+ − 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>.
+ − 25 //////////////////////////////////////////////////////////////////////////////
+ − 26 /// \par COPYRIGHT(c) 2014 STMicroelectronics
+ − 27 ///
+ − 28 /// Redistribution and use in source and binary forms, with or without modification,
+ − 29 /// are permitted provided that the following conditions are met:
+ − 30 /// 1. Redistributions of source code must retain the above copyright notice,
+ − 31 /// this list of conditions and the following disclaimer.
+ − 32 /// 2. Redistributions in binary form must reproduce the above copyright notice,
+ − 33 /// this list of conditions and the following disclaimer in the documentation
+ − 34 /// and/or other materials provided with the distribution.
+ − 35 /// 3. Neither the name of STMicroelectronics nor the names of its contributors
+ − 36 /// may be used to endorse or promote products derived from this software
+ − 37 /// without specific prior written permission.
+ − 38 ///
+ − 39 /// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ − 40 /// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ − 41 /// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ − 42 /// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ − 43 /// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ − 44 /// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ − 45 /// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ − 46 /// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ − 47 /// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ − 48 /// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ − 49 //////////////////////////////////////////////////////////////////////////////
+ − 50
+ − 51 /* Define to prevent recursive inclusion -------------------------------------*/
+ − 52 #ifndef STM32F4xx_HAL_CONF_H
+ − 53 #define STM32F4xx_HAL_CONF_H
+ − 54
+ − 55 /* Exported constants --------------------------------------------------------*/
+ − 56
+ − 57 /* ######################### Hardware Selection ############################## */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 58 /* #define STM32F429xx definition is now done in preprocessor*/
38
+ − 59
+ − 60 /* ########################## Module Selection ############################## */
+ − 61 /**
+ − 62 * @brief This is the list of modules to be used in the HAL driver
+ − 63 */
+ − 64 #define HAL_MODULE_ENABLED
+ − 65 //#define HAL_ADC_MODULE_ENABLED
+ − 66 //#define HAL_CAN_MODULE_ENABLED
+ − 67 //#define HAL_CRC_MODULE_ENABLED
+ − 68 //#define HAL_CRYP_MODULE_ENABLED
+ − 69 //#define HAL_DAC_MODULE_ENABLED
+ − 70 //#define HAL_DCMI_MODULE_ENABLED
+ − 71 //#define HAL_ETH_MODULE_ENABLED
+ − 72 //#define HAL_NAND_MODULE_ENABLED
+ − 73 //#define HAL_NOR_MODULE_ENABLED
+ − 74 //#define HAL_PCCARD_MODULE_ENABLED
+ − 75 //#define HAL_SRAM_MODULE_ENABLED
+ − 76 //#define HAL_HASH_MODULE_ENABLED
+ − 77 //#define HAL_I2C_MODULE_ENABLED
+ − 78 //#define HAL_I2S_MODULE_ENABLED
+ − 79 //#define HAL_IWDG_MODULE_ENABLED
+ − 80 //#define HAL_RNG_MODULE_ENABLED
+ − 81 //#define HAL_SAI_MODULE_ENABLED
+ − 82 //#define HAL_SD_MODULE_ENABLED
+ − 83 //#define HAL_USART_MODULE_ENABLED
+ − 84 //#define HAL_IRDA_MODULE_ENABLED
+ − 85 //#define HAL_SMARTCARD_MODULE_ENABLED
870
+ − 86 #ifdef BOOTLOADER_STANDALONE
+ − 87 #define HAL_WWDG_MODULE_ENABLED
+ − 88 #endif
38
+ − 89 //#define HAL_PCD_MODULE_ENABLED
+ − 90 //#define HAL_HCD_MODULE_ENABLED
+ − 91 #define HAL_SDRAM_MODULE_ENABLED
+ − 92 #define HAL_GPIO_MODULE_ENABLED
+ − 93 #define HAL_LTDC_MODULE_ENABLED
+ − 94 #define HAL_DMA_MODULE_ENABLED
+ − 95 #define HAL_DMA2D_MODULE_ENABLED
+ − 96 #define HAL_RCC_MODULE_ENABLED
+ − 97 #define HAL_RTC_MODULE_ENABLED
+ − 98 #define HAL_SPI_MODULE_ENABLED
+ − 99 #define HAL_TIM_MODULE_ENABLED
+ − 100 #define HAL_UART_MODULE_ENABLED
+ − 101 #define HAL_FLASH_MODULE_ENABLED
+ − 102 #define HAL_PWR_MODULE_ENABLED
+ − 103 #define HAL_CORTEX_MODULE_ENABLED
+ − 104
+ − 105 /* ########################## HSE/HSI Values adaptation ##################### */
+ − 106 /**
+ − 107 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ − 108 * This value is used by the RCC HAL module to compute the system frequency
+ − 109 * (when HSE is used as system clock source, directly or through the PLL).
+ − 110 */
+ − 111 #if !defined (HSE_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 112 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
38
+ − 113 #endif /* HSE_VALUE */
+ − 114
+ − 115 #if !defined (HSE_STARTUP_TIMEOUT)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 116 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */
38
+ − 117 #endif /* HSE_STARTUP_TIMEOUT */
+ − 118
+ − 119 /**
+ − 120 * @brief Internal High Speed oscillator (HSI) value.
+ − 121 * This value is used by the RCC HAL module to compute the system frequency
+ − 122 * (when HSI is used as system clock source, directly or through the PLL).
+ − 123 */
+ − 124 #if !defined (HSI_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 125 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
38
+ − 126 #endif /* HSI_VALUE */
+ − 127
+ − 128 /**
+ − 129 * @brief Internal Low Speed oscillator (LSI) value.
+ − 130 */
+ − 131 #if !defined (LSI_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 132 #define LSI_VALUE ((uint32_t)40000U)
38
+ − 133 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ − 134 The real value may vary depending on the variations
+ − 135 in voltage and temperature. */
+ − 136 /**
+ − 137 * @brief External Low Speed oscillator (LSE) value.
+ − 138 */
+ − 139 #if !defined (LSE_VALUE)
+ − 140 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+ − 141 #endif /* LSE_VALUE */
+ − 142
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 143 #if !defined (LSE_STARTUP_TIMEOUT)
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 144 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 145 #endif /* LSE_STARTUP_TIMEOUT */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 146
38
+ − 147 /**
+ − 148 * @brief External clock source for I2S peripheral
+ − 149 * This value is used by the I2S HAL module to compute the I2S clock source
+ − 150 * frequency, this source is inserted directly through I2S_CKIN pad.
+ − 151 */
+ − 152 #if !defined (EXTERNAL_CLOCK_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 153 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
38
+ − 154 #endif /* EXTERNAL_CLOCK_VALUE */
+ − 155
+ − 156 /* Tip: To avoid modifying this file each time you need to use different HSE,
+ − 157 === you can define the HSE value in your toolchain compiler preprocessor. */
+ − 158
+ − 159 /* ########################### System Configuration ######################### */
+ − 160 /**
+ − 161 * @brief This is the HAL system configuration section
+ − 162 */
+ − 163
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 164 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
38
+ − 165 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */
+ − 166 #define USE_RTOS 0
+ − 167 #define PREFETCH_ENABLE 1
+ − 168 #define INSTRUCTION_CACHE_ENABLE 1
+ − 169 #define DATA_CACHE_ENABLE 1
+ − 170
+ − 171 /* ########################## Assert Selection ############################## */
+ − 172 /**
+ − 173 * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ − 174 * HAL drivers code
+ − 175 */
+ − 176 /* #define USE_FULL_ASSERT 1 */
+ − 177
+ − 178 /* ################## Ethernet peripheral configuration ##################### */
+ − 179
+ − 180 /* Section 1 : Ethernet peripheral configuration */
+ − 181
+ − 182 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 183 #define MAC_ADDR0 2U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 184 #define MAC_ADDR1 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 185 #define MAC_ADDR2 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 186 #define MAC_ADDR3 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 187 #define MAC_ADDR4 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 188 #define MAC_ADDR5 0U
38
+ − 189
+ − 190 /* Definition of the Ethernet driver buffers size and count */
+ − 191 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+ − 192 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+ − 193 #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+ − 194 #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+ − 195
+ − 196 /* Section 2: PHY configuration section */
+ − 197
+ − 198 /* DP83848 PHY Address*/
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 199 #define DP83848_PHY_ADDRESS 0x01U
38
+ − 200 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 201 #define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
38
+ − 202 /* PHY Configuration delay */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 203 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
38
+ − 204
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 205 #define PHY_READ_TO ((uint32_t)0x0000FFFFU)
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 206 #define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
38
+ − 207
+ − 208 /* Section 3: Common PHY Registers */
+ − 209
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 210 #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 211 #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
38
+ − 212
+ − 213 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+ − 214 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+ − 215 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+ − 216 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+ − 217 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+ − 218 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+ − 219 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+ − 220 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+ − 221 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+ − 222 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+ − 223
+ − 224 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+ − 225 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+ − 226 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+ − 227
+ − 228 /* Section 4: Extended PHY Registers */
+ − 229
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 230 #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 231 #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 232 #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
38
+ − 233
+ − 234 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+ − 235 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+ − 236 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+ − 237
+ − 238 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+ − 239 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+ − 240
+ − 241 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+ − 242 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+ − 243
+ − 244 /* Includes ------------------------------------------------------------------*/
+ − 245 /**
+ − 246 * @brief Include module's header file
+ − 247 */
+ − 248
+ − 249 #ifdef HAL_RCC_MODULE_ENABLED
+ − 250 #include "stm32f4xx_hal_rcc.h"
+ − 251 #endif /* HAL_RCC_MODULE_ENABLED */
+ − 252
+ − 253 #ifdef HAL_GPIO_MODULE_ENABLED
+ − 254 #include "stm32f4xx_hal_gpio.h"
+ − 255 #endif /* HAL_GPIO_MODULE_ENABLED */
+ − 256
+ − 257 #ifdef HAL_DMA_MODULE_ENABLED
+ − 258 #include "stm32f4xx_hal_dma.h"
+ − 259 #endif /* HAL_DMA_MODULE_ENABLED */
+ − 260
+ − 261 #ifdef HAL_CORTEX_MODULE_ENABLED
+ − 262 #include "stm32f4xx_hal_cortex.h"
+ − 263 #endif /* HAL_CORTEX_MODULE_ENABLED */
+ − 264
+ − 265 #ifdef HAL_ADC_MODULE_ENABLED
+ − 266 #include "stm32f4xx_hal_adc.h"
+ − 267 #endif /* HAL_ADC_MODULE_ENABLED */
+ − 268
+ − 269 #ifdef HAL_CAN_MODULE_ENABLED
+ − 270 #include "stm32f4xx_hal_can.h"
+ − 271 #endif /* HAL_CAN_MODULE_ENABLED */
+ − 272
+ − 273 #ifdef HAL_CRC_MODULE_ENABLED
+ − 274 #include "stm32f4xx_hal_crc.h"
+ − 275 #endif /* HAL_CRC_MODULE_ENABLED */
+ − 276
+ − 277 #ifdef HAL_CRYP_MODULE_ENABLED
+ − 278 #include "stm32f4xx_hal_cryp.h"
+ − 279 #endif /* HAL_CRYP_MODULE_ENABLED */
+ − 280
+ − 281 #ifdef HAL_DMA2D_MODULE_ENABLED
+ − 282 #include "stm32f4xx_hal_dma2d.h"
+ − 283 #endif /* HAL_DMA2D_MODULE_ENABLED */
+ − 284
+ − 285 #ifdef HAL_DAC_MODULE_ENABLED
+ − 286 #include "stm32f4xx_hal_dac.h"
+ − 287 #endif /* HAL_DAC_MODULE_ENABLED */
+ − 288
+ − 289 #ifdef HAL_DCMI_MODULE_ENABLED
+ − 290 #include "stm32f4xx_hal_dcmi.h"
+ − 291 #endif /* HAL_DCMI_MODULE_ENABLED */
+ − 292
+ − 293 #ifdef HAL_ETH_MODULE_ENABLED
+ − 294 #include "stm32f4xx_hal_eth.h"
+ − 295 #endif /* HAL_ETH_MODULE_ENABLED */
+ − 296
+ − 297 #ifdef HAL_FLASH_MODULE_ENABLED
+ − 298 #include "stm32f4xx_hal_flash.h"
+ − 299 #endif /* HAL_FLASH_MODULE_ENABLED */
+ − 300
+ − 301 #ifdef HAL_SRAM_MODULE_ENABLED
+ − 302 #include "stm32f4xx_hal_sram.h"
+ − 303 #endif /* HAL_SRAM_MODULE_ENABLED */
+ − 304
+ − 305 #ifdef HAL_NOR_MODULE_ENABLED
+ − 306 #include "stm32f4xx_hal_nor.h"
+ − 307 #endif /* HAL_NOR_MODULE_ENABLED */
+ − 308
+ − 309 #ifdef HAL_NAND_MODULE_ENABLED
+ − 310 #include "stm32f4xx_hal_nand.h"
+ − 311 #endif /* HAL_NAND_MODULE_ENABLED */
+ − 312
+ − 313 #ifdef HAL_PCCARD_MODULE_ENABLED
+ − 314 #include "stm32f4xx_hal_pccard.h"
+ − 315 #endif /* HAL_PCCARD_MODULE_ENABLED */
+ − 316
+ − 317 #ifdef HAL_SDRAM_MODULE_ENABLED
+ − 318 #include "stm32f4xx_hal_sdram.h"
+ − 319 #endif /* HAL_SDRAM_MODULE_ENABLED */
+ − 320
+ − 321 #ifdef HAL_HASH_MODULE_ENABLED
+ − 322 #include "stm32f4xx_hal_hash.h"
+ − 323 #endif /* HAL_HASH_MODULE_ENABLED */
+ − 324
+ − 325 #ifdef HAL_I2C_MODULE_ENABLED
+ − 326 #include "stm32f4xx_hal_i2c.h"
+ − 327 #endif /* HAL_I2C_MODULE_ENABLED */
+ − 328
+ − 329 #ifdef HAL_I2S_MODULE_ENABLED
+ − 330 #include "stm32f4xx_hal_i2s.h"
+ − 331 #endif /* HAL_I2S_MODULE_ENABLED */
+ − 332
+ − 333 #ifdef HAL_IWDG_MODULE_ENABLED
+ − 334 #include "stm32f4xx_hal_iwdg.h"
+ − 335 #endif /* HAL_IWDG_MODULE_ENABLED */
+ − 336
+ − 337 #ifdef HAL_LTDC_MODULE_ENABLED
+ − 338 #include "stm32f4xx_hal_ltdc.h"
+ − 339 #endif /* HAL_LTDC_MODULE_ENABLED */
+ − 340
+ − 341 #ifdef HAL_PWR_MODULE_ENABLED
+ − 342 #include "stm32f4xx_hal_pwr.h"
+ − 343 #endif /* HAL_PWR_MODULE_ENABLED */
+ − 344
+ − 345 #ifdef HAL_RNG_MODULE_ENABLED
+ − 346 #include "stm32f4xx_hal_rng.h"
+ − 347 #endif /* HAL_RNG_MODULE_ENABLED */
+ − 348
+ − 349 #ifdef HAL_RTC_MODULE_ENABLED
+ − 350 #include "stm32f4xx_hal_rtc.h"
+ − 351 #endif /* HAL_RTC_MODULE_ENABLED */
+ − 352
+ − 353 #ifdef HAL_SAI_MODULE_ENABLED
+ − 354 #include "stm32f4xx_hal_sai.h"
+ − 355 #endif /* HAL_SAI_MODULE_ENABLED */
+ − 356
+ − 357 #ifdef HAL_SD_MODULE_ENABLED
+ − 358 #include "stm32f4xx_hal_sd.h"
+ − 359 #endif /* HAL_SD_MODULE_ENABLED */
+ − 360
+ − 361 #ifdef HAL_SPI_MODULE_ENABLED
+ − 362 #include "stm32f4xx_hal_spi.h"
+ − 363 #endif /* HAL_SPI_MODULE_ENABLED */
+ − 364
+ − 365 #ifdef HAL_TIM_MODULE_ENABLED
+ − 366 #include "stm32f4xx_hal_tim.h"
+ − 367 #endif /* HAL_TIM_MODULE_ENABLED */
+ − 368
+ − 369 #ifdef HAL_UART_MODULE_ENABLED
+ − 370 #include "stm32f4xx_hal_uart.h"
+ − 371 #endif /* HAL_UART_MODULE_ENABLED */
+ − 372
+ − 373 #ifdef HAL_USART_MODULE_ENABLED
+ − 374 #include "stm32f4xx_hal_usart.h"
+ − 375 #endif /* HAL_USART_MODULE_ENABLED */
+ − 376
+ − 377 #ifdef HAL_IRDA_MODULE_ENABLED
+ − 378 #include "stm32f4xx_hal_irda.h"
+ − 379 #endif /* HAL_IRDA_MODULE_ENABLED */
+ − 380
+ − 381 #ifdef HAL_SMARTCARD_MODULE_ENABLED
+ − 382 #include "stm32f4xx_hal_smartcard.h"
+ − 383 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
+ − 384
+ − 385 #ifdef HAL_WWDG_MODULE_ENABLED
+ − 386 #include "stm32f4xx_hal_wwdg.h"
+ − 387 #endif /* HAL_WWDG_MODULE_ENABLED */
+ − 388
+ − 389 #ifdef HAL_PCD_MODULE_ENABLED
+ − 390 #include "stm32f4xx_hal_pcd.h"
+ − 391 #endif /* HAL_PCD_MODULE_ENABLED */
+ − 392
+ − 393 #ifdef HAL_HCD_MODULE_ENABLED
+ − 394 #include "stm32f4xx_hal_hcd.h"
+ − 395 #endif /* HAL_HCD_MODULE_ENABLED */
+ − 396
+ − 397 /* Exported macro ------------------------------------------------------------*/
+ − 398 #ifdef USE_FULL_ASSERT
+ − 399 /**
+ − 400 * @brief The assert_param macro is used for function's parameters check.
+ − 401 * @param expr: If expr is false, it calls assert_failed function
+ − 402 * which reports the name of the source file and the source
+ − 403 * line number of the call that failed.
+ − 404 * If expr is true, it returns no value.
+ − 405 * @retval None
+ − 406 */
+ − 407 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+ − 408 /* Exported functions ------------------------------------------------------- */
+ − 409 void assert_failed(uint8_t* file, uint32_t line);
+ − 410 #else
+ − 411 #define assert_param(expr) ((void)0)
+ − 412 #endif /* USE_FULL_ASSERT */
+ − 413
+ − 414 #endif /* STM32F4xx_HAL_CONF_H */