Mercurial > public > ostc4
annotate Discovery/Src/tHome.c @ 845:17d9d6eddd8d Evo_2_23
Added new PreDiveCheck info page:
In case a DiveO2 sensor is connected to the OSTC than the values of the DiveO2 internal pressure and temperature sensors may be used for predive checks. The pressure sensors is used for over / under pressure test and the values are visualized using a graph to make it easier to check if the pressure keeps stable. The temperature measurement gives an indication if the scrubber is getting active. This view is highly dependend on the surface temperature but may be useful e.g. for diving in european area.
In addition the values ofthe connected sensors are shown.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 21 Jan 2024 22:24:36 +0100 |
| parents | aed39d19269c |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tHome.c | |
| 5 /// \brief Control for Surface and Dive Templates | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 10-November-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "tHome.h" | |
| 31 | |
| 32 #include "data_exchange_main.h" // for dataOutGetPointer() | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "t3.h" | |
| 35 #include "t4_tetris.h" | |
| 36 #include "t5_gauge.h" | |
| 37 #include "t6_apnea.h" | |
| 38 #include "t7.h" | |
| 39 #include "tDebug.h" | |
| 40 #include "timer.h" // for timer_Stopwatch_Restart | |
| 41 #include "tMenu.h" | |
| 42 #include "tMenuEditGasOC.h" // for openEdit_DiveSelectBetterGas() | |
| 43 #include "tMenuEditSetpoint.h" // for openEdit_DiveSelectBetterSetpoint() | |
| 44 #include "simulation.h" | |
|
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
289
diff
changeset
|
45 #include "motion.h" |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
46 #include "logbook_miniLive.h" |
| 38 | 47 |
| 48 /* Private types -------------------------------------------------------------*/ | |
| 49 | |
| 50 /* Exported variables --------------------------------------------------------*/ | |
| 51 _Bool warning_count_high_time = 0; | |
| 52 _Bool display_count_high_time = 0; | |
| 53 | |
| 54 uint8_t errorsInSettings = 0; | |
| 55 /* Private variables ---------------------------------------------------------*/ | |
| 56 static uint8_t warning_toogle_count; | |
| 57 static uint16_t display_toogle_count; | |
| 58 static uint16_t tHome_tick_count_cview; | |
| 59 static uint16_t tHome_tick_count_field; | |
| 576 | 60 static uint16_t tHome_tick_count_o2sens; |
| 38 | 61 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
777
diff
changeset
|
62 const uint8_t cv_changelist[] = {CVIEW_Compass, CVIEW_SummaryOfLeftCorner, CVIEW_Tissues, CVIEW_Profile, CVIEW_EADTime, CVIEW_Gaslist, CVIEW_noneOrDebug, CVIEW_Decolist, CVIEW_sensors,CVIEW_sensors_mV, CVIEW_Timer, CVIEW_END}; |
|
594
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
63 const uint8_t cv_changelist_BS[] = {CVIEW_T3_Decostop, CVIEW_sensors, CVIEW_Compass, CVIEW_T3_MaxDepth,CVIEW_T3_StopWatch, CVIEW_T3_TTS, CVIEW_T3_GasList, CVIEW_T3_ppO2andGas, CVIEW_noneOrDebug, |
|
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
64 CVIEW_T3_Navigation, CVIEW_T3_DepthData, CVIEW_T3_DecoTTS, |
|
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
65 #ifdef ENABLE_T3_PROFILE_VIEW |
|
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
66 CVIEW_T3_Profile, |
|
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
67 #endif |
|
836
8d6c35655d4d
Bugfix BF temperatur display and cv switching:
ideenmodellierer
parents:
816
diff
changeset
|
68 CVIEW_T3_Temperature, |
|
594
280c11153080
Added compile switch for new T3 View Profile
Ideenmodellierer
parents:
576
diff
changeset
|
69 CVIEW_T3_END}; |
| 38 | 70 |
| 71 /* Private function prototypes -----------------------------------------------*/ | |
| 72 | |
| 576 | 73 #define AUTORETURN_O2SENS (200u) /* return to sensor view after 20 seconds in case sensor is connected */ |
| 74 | |
| 75 | |
| 38 | 76 /* Exported functions --------------------------------------------------------*/ |
| 77 | |
| 78 void set_globalState_tHome(void) | |
| 79 { | |
| 80 if(stateUsed->mode == MODE_DIVE) | |
| 739 | 81 { |
| 38 | 82 set_globalState(StD); |
| 739 | 83 } |
| 38 | 84 else |
| 85 set_globalState(StS); | |
|
816
c4ee952b9425
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
heinrichsweikamp
parents:
810
diff
changeset
|
86 |
|
c4ee952b9425
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
heinrichsweikamp
parents:
810
diff
changeset
|
87 clearDisabledMenuLines(); |
| 38 | 88 } |
| 89 | |
| 90 | |
| 91 void tHome_init(void) | |
| 92 { | |
| 93 t7_init(); // standard + surface | |
| 94 t3_init(); // big font | |
| 95 t4_init(); // game | |
| 96 t5_init(); // gauge | |
| 97 t6_init(); // apnea | |
| 98 } | |
| 99 | |
| 100 | |
| 101 void tHome_init_compass(void) | |
| 102 { | |
| 103 init_t7_compass(); | |
| 104 } | |
| 105 | |
| 106 | |
| 107 void tHome_refresh(void) | |
| 108 { | |
| 109 SSettings* pSettings = settingsGetPointer(); | |
| 110 | |
| 111 warning_toogle_count++; | |
| 112 if(warning_toogle_count >= 2* pSettings->warning_blink_dsec) | |
| 113 warning_toogle_count = 0; | |
| 114 | |
| 115 if(warning_toogle_count >= pSettings->warning_blink_dsec) | |
| 116 warning_count_high_time = 1; | |
| 117 else | |
| 118 warning_count_high_time = 0; | |
| 119 | |
| 120 | |
| 121 display_toogle_count++; | |
| 122 if(display_toogle_count >= 2* pSettings->display_toogle_desc) | |
| 123 display_toogle_count = 0; | |
| 124 | |
| 125 if(display_toogle_count >= pSettings->display_toogle_desc) | |
| 126 display_count_high_time = 1; | |
| 127 else | |
| 128 display_count_high_time = 0; | |
| 129 | |
| 130 | |
| 131 if(pSettings->design == 6) | |
| 132 t6_refresh(); | |
| 133 else | |
| 134 if(pSettings->design == 5) | |
| 135 t5_refresh(); | |
| 136 else | |
| 137 if(pSettings->design == 4) | |
| 138 t4_refresh(); | |
| 139 else | |
| 140 if(pSettings->design == 3) | |
| 141 t3_refresh(); | |
| 142 else | |
| 143 if(pSettings->design == 7) | |
| 144 t7_refresh(); | |
| 145 else | |
| 146 { | |
| 147 pSettings->design = 7; | |
| 148 t7_refresh(); | |
| 149 } | |
| 150 } | |
| 151 | |
| 152 | |
| 153 void tHome_sleepmode_fun(void) | |
| 154 { | |
| 155 t7_refresh_sleepmode_fun(); | |
| 156 } | |
| 157 | |
| 158 | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
159 static void checkSetStateSim(SSettings *settings) |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
160 { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
161 if (is_stateUsedSetToSim()) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
162 if (settings->design != 3) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
163 set_globalState(StDSIM1); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
164 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
165 #ifdef ENABLE_T3_PPO_SIM |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
166 if (stateUsed->diveSettings.ppo2sensors_deactivated & 0x01 == 0) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
167 set_globalState(StDSIM1); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
168 } else if (stateUsed->diveSettings.ppo2sensors_deactivated & 0x02 == 0) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
169 set_globalState(StDSIM3); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
170 } else if (stateUsed->diveSettings.ppo2sensors_deactivated & 0x04 == 0) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
171 set_globalState(StDSIM5); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
172 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
173 set_globalState(StD); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
174 } |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
175 #endif |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
176 } |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
177 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
178 set_globalState(StD); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
179 } |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
180 } |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
181 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
182 |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
183 static void checkSetStateCompassSim(SSettings *settings) |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
184 { |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
185 if (settings->design == 7 && t7_isCompassShowing()) { |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
186 set_globalState(StDBEAR); |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
187 } else { |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
188 checkSetStateSim(settings); |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
189 } |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
190 } |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
191 |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
192 |
| 38 | 193 void tHomeDiveMenuControl(uint8_t sendAction) |
| 194 { | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
195 SSettings *settings = settingsGetPointer(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
196 |
| 38 | 197 if(sendAction == ACTION_BUTTON_NEXT) |
| 198 { | |
| 199 if(settingsGetPointer()->design == 4) | |
| 200 return; | |
| 201 | |
| 202 switch(get_globalState()) | |
| 203 { | |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
204 case StD: |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
205 if(settingsGetPointer()->design == 6) |
| 38 | 206 { |
| 207 if(is_stateUsedSetToSim()) | |
| 208 set_globalState(StDSIM1); | |
| 209 else | |
| 210 set_globalState(StDQUIT); | |
| 211 break; | |
| 212 } | |
| 213 | |
| 214 if(settingsGetPointer()->design == 5) | |
| 215 { | |
| 216 if(t5_getCustomView() == CVIEW_Compass) | |
| 217 set_globalState(StDBEAR); | |
| 218 else | |
| 219 set_globalState(StDRAVG); | |
| 220 break; | |
| 221 } | |
| 222 | |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
223 if(settingsGetPointer()->design == 3) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
224 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
225 switch(t3_getCustomView()) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
226 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
227 case CVIEW_T3_Navigation: |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
228 case CVIEW_Compass: set_globalState(StDBEAR); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
229 break; |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
230 case CVIEW_T3_StopWatch: set_globalState(StDRAVG); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
231 break; |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
232 case CVIEW_T3_GasList: if(stateUsed->warnings.betterGas) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
233 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
234 set_globalState(StDMGAS); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
235 } |
| 838 | 236 else |
| 237 { | |
| 238 set_globalState(StDMENU); | |
| 239 } | |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
240 break; |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
241 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
242 case CVIEW_sensors: if(is_stateUsedSetToSim()) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
243 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
244 set_globalState(StDSIM1); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
245 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
246 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
247 #endif |
|
628
db2bcd2f6778
Added compile switch for T3_PROFILE menu operation option
Ideenmodellierer
parents:
619
diff
changeset
|
248 #ifdef ENABLE_T3_PROFILE_VIEW |
| 613 | 249 case CVIEW_T3_Profile: set_globalState(StDMARK); |
|
628
db2bcd2f6778
Added compile switch for T3_PROFILE menu operation option
Ideenmodellierer
parents:
619
diff
changeset
|
250 #endif |
| 613 | 251 break; |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
252 default: |
| 739 | 253 set_globalState(StDMENU); |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
254 break; |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
255 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
256 break; |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
257 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
258 |
| 38 | 259 if(stateUsed->warnings.betterGas) |
| 260 set_globalState(StDMGAS); | |
| 261 else | |
| 262 if(stateUsed->warnings.betterSetpoint) | |
| 263 set_globalState(StDMSPT); | |
| 264 else | |
| 265 set_globalState(StDMENU); | |
| 266 break; | |
| 267 | |
| 268 case StDMGAS: | |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
269 if(settingsGetPointer()->design == 3) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
270 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
271 set_globalState(StD); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
272 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
273 else |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
274 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
275 if(stateUsed->warnings.betterSetpoint) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
276 set_globalState(StDMSPT); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
277 else |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
278 set_globalState(StDMENU); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
279 } |
| 38 | 280 break; |
| 281 | |
| 282 case StDMSPT: | |
| 283 set_globalState(StDMENU); | |
| 284 break; | |
| 285 | |
| 286 case StDMENU: | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
287 if (settings->design == 7 && isLoopMode(settings->dive_mode)) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
288 set_globalState(StDBAILOUT); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
289 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
290 break; |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
291 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
292 |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
293 checkSetStateCompassSim(settings); |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
294 |
| 38 | 295 break; |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
296 case StDBAILOUT: |
|
775
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
297 if (settingsGetPointer()->dive_mode == DIVEMODE_CCR && isLoopMode(stateUsed->diveSettings.diveMode) && findSwitchToSetpoint()) { |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
298 set_globalState(StDSETPOINT); |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
299 |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
300 break; |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
301 } |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
302 |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
303 checkSetStateCompassSim(settings); |
|
775
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
304 |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
305 break; |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
306 case StDSETPOINT: |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
307 checkSetStateCompassSim(settings); |
| 38 | 308 |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
309 break; |
| 38 | 310 case StDSIM1: |
| 311 set_globalState(StDSIM2); | |
| 312 break; | |
| 313 | |
| 314 case StDSIM2: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
315 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
316 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
317 set_globalState(StDSIM3); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
318 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
319 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
320 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
321 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
322 if((stateUsed->diveSettings.ppo2sensors_deactivated & 0x02) == 0) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
323 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
324 set_globalState(StDSIM3); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
325 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
326 else if((stateUsed->diveSettings.ppo2sensors_deactivated & 0x04) == 0) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
327 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
328 set_globalState(StDSIM5); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
329 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
330 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
331 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
332 set_globalState(StD); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
333 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
334 #endif |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
335 } |
| 38 | 336 break; |
| 337 | |
| 338 case StDSIM3: | |
| 339 set_globalState(StDSIM4); | |
| 340 break; | |
| 341 | |
| 342 case StDSIM4: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
343 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
344 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
345 set_globalState(StD); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
346 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
347 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
348 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
349 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
350 if((stateUsed->diveSettings.ppo2sensors_deactivated & 0x04) == 0) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
351 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
352 set_globalState(StDSIM5); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
353 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
354 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
355 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
356 set_globalState(StD); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
357 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
358 #endif |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
359 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
360 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
361 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
362 case StDSIM5: |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
363 set_globalState(StDSIM6); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
364 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
365 |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
366 case StDSIM6: |
| 38 | 367 set_globalState(StD); |
| 368 break; | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
369 #endif |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
370 case StDBEAR: |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
371 if (settingsGetPointer()->design == 7) { |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
372 checkSetStateSim(settings); |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
373 |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
374 break; |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
375 } |
|
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
376 |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
377 if(settingsGetPointer()->design == 5) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
378 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
379 set_globalState(StDRAVG); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
380 } |
| 38 | 381 |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
382 if(settingsGetPointer()->design == 3) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
383 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
384 if(t3_getCustomView() == CVIEW_T3_Navigation) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
385 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
386 set_globalState(StDRAVG); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
387 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
388 else |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
389 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
390 set_globalState(StD); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
391 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
392 } |
| 38 | 393 break; |
|
516
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
394 case StDRAVG: |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
395 if(settingsGetPointer()->design == 5) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
396 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
397 if(is_stateUsedSetToSim()) |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
398 set_globalState(StDSIM1); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
399 else |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
400 set_globalState(StD); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
401 break; |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
402 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
403 else |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
404 { |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
405 set_globalState(StD); |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
406 } |
|
bd66f4910993
Added quick menu function to big font view:
Ideenmodellierer
parents:
505
diff
changeset
|
407 break; |
| 38 | 408 case StDQUIT: // t6_apnea |
| 409 set_globalState(StD); | |
| 410 break; | |
| 411 | |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
412 case StDMARK: |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
413 if((settingsGetPointer()->design == 3) && (MiniLiveLogbook_getNextMarkerIndex(0) != 0)) |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
414 { |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
415 set_globalState(StDCHECK); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
416 } |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
417 else |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
418 { |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
419 set_globalState(StD); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
420 } |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
421 break; |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
422 |
| 38 | 423 default: |
| 424 set_globalState(StD); | |
| 425 } | |
| 426 } | |
| 427 | |
| 428 if(sendAction == ACTION_BUTTON_ENTER) | |
| 429 { | |
| 430 if(settingsGetPointer()->design == 4) | |
| 431 return; | |
| 432 | |
| 433 switch(get_globalState()) | |
| 434 { | |
| 435 case StDMGAS: | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
436 openEdit_DiveSelectBetterGas(false); |
| 38 | 437 set_globalState(StD); |
| 438 break; | |
| 439 case StDMSPT: | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
440 openEdit_DiveSelectBetterSetpoint(false); |
| 38 | 441 set_globalState(StD); |
| 442 break; | |
| 443 | |
| 444 case StDMENU: | |
| 445 openMenu_first_page_with_OC_gas_update(); | |
| 446 break; | |
| 447 | |
| 448 case StDSIM1: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
449 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
450 { |
| 38 | 451 Sim_Quit(); |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
452 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
453 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
454 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
455 Sim_IncreasePPO(0); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
456 } |
| 38 | 457 break; |
| 458 | |
| 459 case StDSIM2: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
460 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
461 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
462 Sim_Ascend(); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
463 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
464 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
465 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
466 Sim_DecreasePPO(0); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
467 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
468 |
| 38 | 469 break; |
| 470 | |
| 471 case StDSIM3: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
472 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
473 { |
| 38 | 474 Sim_Descend(); |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
475 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
476 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
477 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
478 Sim_IncreasePPO(1); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
479 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
480 |
| 38 | 481 break; |
| 482 | |
| 483 case StDSIM4: | |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
484 if(settingsGetPointer()->design != 3) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
485 { |
| 38 | 486 Sim_Divetime(); |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
487 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
488 else |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
489 { |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
490 Sim_DecreasePPO(1); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
491 } |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
492 |
| 38 | 493 break; |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
494 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
495 case StDSIM5: |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
496 Sim_IncreasePPO(2); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
497 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
498 case StDSIM6: |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
499 Sim_DecreasePPO(2); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
500 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
628
diff
changeset
|
501 #endif |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
502 case StDBAILOUT: |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
503 if (isLoopMode(stateUsed->diveSettings.diveMode)) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
504 tMEGas_check_switch_to_bailout(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
505 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
506 openEdit_DiveSelectBetterGas(true); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
507 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
508 checkSwitchToLoop(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
509 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
510 openEdit_DiveSelectBetterSetpoint(true); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
511 } |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
512 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
513 set_globalState(StD); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
514 |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
739
diff
changeset
|
515 break; |
|
775
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
516 case StDSETPOINT: |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
517 checkSwitchSetpoint(); |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
518 |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
519 set_globalState(StD); |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
520 |
|
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
521 break; |
|
777
6a8cf91e5b22
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
heinrichsweikamp
parents:
775
diff
changeset
|
522 case StDBEAR: // t5_gauge, t7 |
|
774
6169309d6eb9
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
heinrichsweikamp
parents:
773
diff
changeset
|
523 setCompassHeading((uint16_t)stateUsed->lifeData.compass_heading); |
| 38 | 524 set_globalState(StD); |
| 525 break; | |
| 526 | |
| 527 case StDRAVG: // t5_gauge | |
| 528 timer_Stopwatch_Restart(); | |
| 529 set_globalState(StD); | |
| 530 break; | |
| 531 | |
| 532 case StDQUIT: // t6_apnea | |
| 533 set_globalState(StD); // used to end StDQUIT, is called before everything else because changes are made in the next lines | |
| 534 if(is_stateUsedSetToSim()) | |
| 535 Sim_Quit(); | |
| 536 else | |
| 537 dataOutGetPointer()->setEndDive = 1; | |
| 538 break; | |
| 613 | 539 case StDMARK: stateUsedWrite->events.manualMarker = 1; |
| 540 set_globalState(StD); | |
| 541 break; | |
| 38 | 542 |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
543 case StDCHECK: MiniLiveLogbook_checkMarker(); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
544 break; |
| 38 | 545 default: |
| 546 break; | |
| 547 } | |
| 548 } | |
| 549 } | |
| 550 | |
| 551 | |
| 552 void tHome_findNextStop(const uint16_t *list, uint8_t *depthOutMeter, uint16_t *lengthOutSeconds) | |
| 553 { | |
| 554 uint8_t ptr = DECOINFO_STRUCT_MAX_STOPS - 1; | |
| 555 | |
| 556 while(ptr && !list[ptr]) | |
| 557 ptr--; | |
| 558 | |
| 559 *lengthOutSeconds = list[ptr]; | |
| 560 if(!(*lengthOutSeconds)) | |
| 561 { | |
| 562 *depthOutMeter = 0; | |
| 563 } | |
| 564 else | |
| 565 if(ptr == 0) | |
| 566 { | |
| 567 *depthOutMeter = (uint8_t)((stateUsed->diveSettings.last_stop_depth_bar*10.0f) + 0.1f); | |
| 568 } | |
| 569 else | |
| 570 { | |
| 571 ptr -= 1; | |
| 572 *depthOutMeter = (uint8_t)(((stateUsed->diveSettings.input_second_to_last_stop_depth_bar + (stateUsed->diveSettings.input_next_stop_increment_depth_bar * ptr))*10.0f) + 0.1f); | |
| 573 } | |
| 574 } | |
| 575 | |
| 576 | |
| 577 void tHome_change_field_button_pressed(void) | |
| 578 { | |
| 579 tHome_tick_count_field = 0; | |
| 576 | 580 tHome_tick_count_o2sens = 0; |
| 38 | 581 if(settingsGetPointer()->design == 7) |
| 582 t7_change_field(); | |
| 583 } | |
| 584 | |
| 585 | |
|
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
289
diff
changeset
|
586 void tHome_change_customview_button_pressed(uint8_t action) |
| 38 | 587 { |
| 588 tHome_tick_count_cview = 0; | |
| 576 | 589 tHome_tick_count_o2sens = 0; |
| 590 | |
| 38 | 591 if(settingsGetPointer()->design == 7) |
|
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
289
diff
changeset
|
592 t7_change_customview(action); |
| 38 | 593 else |
| 594 if(settingsGetPointer()->design == 3) | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
595 t3_change_customview(action); |
| 38 | 596 else |
| 597 if(settingsGetPointer()->design == 5) | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
598 t5_change_customview(action); |
| 38 | 599 else |
| 600 if(settingsGetPointer()->design == 6) | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
601 t6_change_customview(action); |
| 38 | 602 } |
| 603 | |
| 505 | 604 uint8_t tHome_getNumberOfAvailableCVs(const uint8_t* pcv_list) |
| 605 { | |
| 606 uint8_t cnt = 0; | |
| 607 | |
| 608 while((pcv_list[cnt] != CVIEW_END) && (pcv_list[cnt] != CVIEW_T3_END)) | |
| 609 { | |
| 610 cnt++; | |
| 611 if (cnt > 100) /* just in case an invalid list has been provided... */ | |
| 612 { | |
| 613 break; | |
| 614 } | |
| 615 } | |
| 616 cnt--; /* do not count end token */ | |
| 617 return cnt; | |
| 618 } | |
| 38 | 619 |
| 620 void tHome_tick(void) | |
| 621 { | |
| 622 uint16_t field = settingsGetPointer()->tX_userselectedLeftLowerCornerTimeout; | |
| 623 uint16_t cview = settingsGetPointer()->tX_customViewTimeout; | |
| 624 | |
| 625 if(field) | |
| 626 { | |
| 627 tHome_tick_count_field++; | |
| 628 if(tHome_tick_count_field > (field * 10)) | |
| 629 { | |
| 630 tHome_tick_count_field = 0; | |
| 631 if(settingsGetPointer()->design == 7) | |
| 632 { | |
| 633 t7_set_field_to_primary(); | |
| 634 } | |
| 635 } | |
| 636 } | |
| 637 | |
| 638 if(cview) | |
| 639 { | |
| 640 tHome_tick_count_cview++; | |
| 641 if(tHome_tick_count_cview > (cview *10)) | |
| 642 { | |
| 643 tHome_tick_count_cview = 0; | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
777
diff
changeset
|
644 if (settingsGetPointer()->design == 7 && !t7_isTimerRunning(false)) { |
| 38 | 645 t7_set_customview_to_primary(); |
| 646 } | |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
516
diff
changeset
|
647 if(settingsGetPointer()->design == 3) |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
516
diff
changeset
|
648 { |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
516
diff
changeset
|
649 t3_set_customview_to_primary(); |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
516
diff
changeset
|
650 } |
| 38 | 651 } |
| 652 } | |
| 576 | 653 |
|
810
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
654 if((stateUsed->mode == MODE_SURFACE) && (!t7_customview_disabled(CVIEW_sensors))) |
| 576 | 655 { |
| 656 tHome_tick_count_o2sens++; | |
| 657 if(tHome_tick_count_o2sens > AUTORETURN_O2SENS) | |
| 658 { | |
| 659 tHome_tick_count_o2sens = 0; | |
|
810
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
660 if((stateUsed->chargeStatus == CHARGER_off) |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
661 || (stateUsed->lifeData.ppO2Sensor_bar[0] != 0.0) |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
662 || (stateUsed->lifeData.ppO2Sensor_bar[1] != 0.0) |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
663 || (stateUsed->lifeData.ppO2Sensor_bar[2] != 0.0)) |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
664 { |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
665 t7_select_customview(CVIEW_sensors); |
|
e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
Ideenmodellierer
parents:
805
diff
changeset
|
666 } |
| 576 | 667 } |
| 668 } | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
777
diff
changeset
|
669 |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
777
diff
changeset
|
670 t7_tick(); |
| 38 | 671 } |
| 672 | |
| 673 | |
| 674 uint32_t tHome_DateCode(RTC_DateTypeDef *dateInput) | |
| 675 { | |
| 676 uint32_t answer = 0; | |
| 677 | |
| 678 answer = 0; | |
| 679 answer += (dateInput->Year & 0x7F)<< 9; | |
| 680 answer += (dateInput->Month & 0x0F)<< 5; | |
| 681 answer += (dateInput->Date & 0x1F); | |
| 682 | |
| 683 return answer; | |
| 684 } | |
| 685 | |
| 686 | |
| 687 uint8_t tHome_gas_writer(uint8_t oxygen_percentage, uint8_t helium_percentage, char *text) | |
| 688 { | |
| 689 if(oxygen_percentage == 100) | |
| 690 return (uint8_t) snprintf(text,10,"Oxy"); | |
| 691 else if((oxygen_percentage == 21) && (!helium_percentage)) | |
| 692 return (uint8_t) snprintf(text,10,"Air"); | |
| 693 else if(!helium_percentage) | |
| 694 return (uint8_t) snprintf(text,10,"NX%02i",oxygen_percentage); | |
| 695 else if((oxygen_percentage + helium_percentage) == 100) | |
| 696 return (uint8_t) snprintf(text,10,"HX%02i",oxygen_percentage); | |
| 697 else | |
| 698 return (uint8_t) snprintf(text,10,"%02i/%02i",oxygen_percentage,helium_percentage); | |
| 699 } | |
| 700 | |
| 701 uint8_t tHome_show_lost_connection_count(GFX_DrawCfgScreen *ScreenToWriteOn) | |
| 702 { | |
| 208 | 703 static uint8_t LastKnowRTEState = SPI_RX_STATE_INVALID; |
| 704 | |
| 99 | 705 if(!SPI_MIN_ERROR_SHOW) return 0; |
|
172
c659fda83e44
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
heinrichsweikamp
parents:
138
diff
changeset
|
706 if(DataEX_lost_connection_count()>=SPI_MIN_ERROR_SHOW && SPI_SHOW_SYNC_STATS){ |
| 38 | 707 |
| 99 | 708 char text[64]; |
| 38 | 709 |
| 82 | 710 SDataExchangeSlaveToMaster* dataIn=get_dataInPointer(); |
| 208 | 711 SDataReceiveFromMaster* pDataOut = dataOutGetPointer(); |
| 82 | 712 |
|
493
b560e474e319
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Ideenmodellierer
parents:
386
diff
changeset
|
713 snprintf(text,32,"spi err:\002 %ld/%ld",DataEX_lost_connection_count(),get_num_SPI_CALLBACKS()); |
| 99 | 714 Gfx_write_label_var(ScreenToWriteOn, 100,300, 0,&FontT24,CLUT_ButtonSymbols,text); |
| 82 | 715 |
| 104 | 716 // snprintf(text,32,"header:\002%X%X%X%X",dataIn->header.checkCode[0],dataIn->header.checkCode[1],dataIn->header.checkCode[2],dataIn->header.checkCode[3]); |
| 717 // Gfx_write_label_var(ScreenToWriteOn, 350,550, 0,&FontT24,CLUT_ButtonSymbols,text); | |
| 82 | 718 |
| 208 | 719 //snprintf(text,32,"footer:\002%X%X%X%X",dataIn->footer.checkCode[0],dataIn->footer.checkCode[1],dataIn->footer.checkCode[2],dataIn->footer.checkCode[3]); |
| 720 | |
| 721 /* data shifted => ignore received data */ | |
| 722 if((pDataOut->header.checkCode[SPI_HEADER_INDEX_RX_STATE] == SPI_RX_STATE_SHIFTED) || (pDataOut->header.checkCode[SPI_HEADER_INDEX_RX_STATE] == SPI_RX_STATE_OFFLINE)) | |
| 723 { | |
| 724 dataIn->header.checkCode[SPI_HEADER_INDEX_RX_STATE] = LastKnowRTEState; | |
| 725 } | |
| 726 else | |
| 727 { | |
| 728 LastKnowRTEState =dataIn->header.checkCode[SPI_HEADER_INDEX_RX_STATE]; | |
| 729 } | |
| 730 snprintf(text,32,"RX State M|R:\002%X|%X",pDataOut->header.checkCode[SPI_HEADER_INDEX_RX_STATE], dataIn->header.checkCode[SPI_HEADER_INDEX_RX_STATE] ); | |
| 99 | 731 Gfx_write_label_var(ScreenToWriteOn, 600,800, 0,&FontT24,CLUT_ButtonSymbols,text); |
| 732 } | |
| 82 | 733 |
| 99 | 734 |
| 735 | |
| 736 // snprintf(text,32,"cpt:\002%i",get_num_SPI_CALLBACKS()); | |
| 737 // Gfx_write_label_var(ScreenToWriteOn, 600,800, 90,&FontT24,CLUT_ButtonSymbols,text); | |
| 82 | 738 |
| 739 // snprintf(text,10,"i2c:\002%i",get_DataEX_Error_place()); | |
| 740 // Gfx_write_label_var(ScreenToWriteOn, 600,800, 90,&FontT24,CLUT_ButtonSymbols,text); | |
| 38 | 741 |
| 742 return DataEX_lost_connection_count(); | |
| 743 } |