Mercurial > public > ostc4
annotate Documentations/dump-disc.cfg @ 271:1303747b5ba2 write-from-sim
cleanup: also write gas and setpoint changes in simulator mode
This is related to the previous commit. There is all kinds of logic around
that distinguishes real diving mode and simulator mode. This is valid in certain
cases. For example, we do not want a simulator session to act as a repetitive dive
for subsequent real dives.
What is simply wrong, is skipping relevant logic, like gas switches to act
differently in the simulator and in a real dive. The main advantage of this
commit is code simplicity. Normal users will never see the difference, as
simulator dives are not logged (unless compiled in by a developer).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Sat, 27 Apr 2019 09:32:16 +0200 |
| parents | 01cc5959f199 |
| children |
| rev | line source |
|---|---|
| 34 | 1 #! openocd -f |
| 2 # Define the prob used: | |
| 3 source [find interface/stlink-v2.cfg] | |
| 4 set WORKAREASIZE 0x8000 | |
| 5 transport select hla_swd | |
| 6 | |
| 7 # Reset options | |
| 8 set ENABLE_LOW_POWER 1 | |
| 9 set STOP_WATCHDOG 1 | |
| 10 reset_config srst_only srst_nogate connect_assert_srst | |
| 11 | |
| 12 # Seelct the right chip | |
| 13 set CHIPNAME stm32f427IIT6 | |
| 14 set CONNECT_UNDER_RESET 1 | |
| 15 source [find target/stm32f4x.cfg] | |
| 16 | |
| 17 # Allow to continue execution after a connection: | |
| 18 init_reset run | |
| 19 | |
| 20 puts "Flash banks:" | |
| 21 flash banks | |
| 22 | |
| 23 #puts "Reading FIRMWARE..." | |
| 24 # Requires OpenOCD 0.10.0 / released January 2017 ? | |
| 25 #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 | |
| 26 | |
| 27 #puts "Done." | |
| 28 exit |