Mercurial > public > ostc4
annotate Small_CPU/Inc/stm32f4xx_hal_conf.h @ 487:0f5080f50ba7
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
FixLayout Header LogView
| author | heinrichsweikamp <bitbucket@heinrichsweikamp.com> |
|---|---|
| date | Tue, 26 May 2020 19:27:07 +0000 |
| parents | f35e53ef04e0 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file GPIO/GPIO_IOToggle/Inc/stm32f4xx_hal_conf.h | |
| 4 * @author MCD Application Team | |
| 5 * @version V1.1.0 | |
| 6 * @date 26-June-2014 | |
| 7 * @brief HAL configuration file. | |
| 8 ****************************************************************************** | |
| 9 * @attention | |
| 10 * | |
| 11 * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> | |
| 12 * | |
| 13 * Redistribution and use in source and binary forms, with or without modification, | |
| 14 * are permitted provided that the following conditions are met: | |
| 15 * 1. Redistributions of source code must retain the above copyright notice, | |
| 16 * this list of conditions and the following disclaimer. | |
| 17 * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| 18 * this list of conditions and the following disclaimer in the documentation | |
| 19 * and/or other materials provided with the distribution. | |
| 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| 21 * may be used to endorse or promote products derived from this software | |
| 22 * without specific prior written permission. | |
| 23 * | |
| 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| 34 * | |
| 35 ****************************************************************************** | |
| 36 */ | |
| 37 | |
| 38 /* Define to prevent recursive inclusion -------------------------------------*/ | |
| 39 #ifndef STM32F4xx_HAL_CONF_H | |
| 40 #define STM32F4xx_HAL_CONF_H | |
| 41 | |
| 42 #ifdef __cplusplus | |
| 43 extern "C" { | |
| 44 #endif | |
| 45 | |
| 46 /* Exported types ------------------------------------------------------------*/ | |
| 47 /* Exported constants --------------------------------------------------------*/ | |
| 48 | |
| 49 /* ######################### Hardware Selection ############################## */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
50 /* #define STM32F411xE now defined in preprocessor */ |
| 38 | 51 |
| 52 /* ########################## Module Selection ############################## */ | |
| 53 /** | |
| 54 * @brief This is the list of modules to be used in the HAL driver | |
| 55 */ | |
| 56 #define HAL_MODULE_ENABLED | |
| 57 #define HAL_ADC_MODULE_ENABLED | |
| 58 /* #define HAL_CAN_MODULE_ENABLED */ | |
| 59 /* #define HAL_CRC_MODULE_ENABLED */ | |
| 60 /* #define HAL_CRYP_MODULE_ENABLED */ | |
| 61 /* #define HAL_DAC_MODULE_ENABLED */ | |
| 62 /* #define HAL_DCMI_MODULE_ENABLED */ | |
| 63 #define HAL_DMA_MODULE_ENABLED | |
| 64 /* #define HAL_DMA2D_MODULE_ENABLED */ | |
| 65 /* #define HAL_ETH_MODULE_ENABLED */ | |
| 66 #define HAL_FLASH_MODULE_ENABLED | |
| 67 /* #define HAL_NAND_MODULE_ENABLED */ | |
| 68 /* #define HAL_NOR_MODULE_ENABLED */ | |
| 69 /* #define HAL_PCCARD_MODULE_ENABLED */ | |
| 70 /* #define HAL_SRAM_MODULE_ENABLED */ | |
| 71 /* #define HAL_SDRAM_MODULE_ENABLED */ | |
| 72 /* #define HAL_HASH_MODULE_ENABLED */ | |
| 73 #define HAL_GPIO_MODULE_ENABLED | |
| 74 #define HAL_I2C_MODULE_ENABLED | |
| 75 /* #define HAL_I2S_MODULE_ENABLED */ | |
| 76 /* #define HAL_IWDG_MODULE_ENABLED */ | |
| 77 /* #define HAL_LTDC_MODULE_ENABLED */ | |
| 78 #define HAL_PWR_MODULE_ENABLED | |
| 79 #define HAL_RCC_MODULE_ENABLED | |
| 80 /* #define HAL_RNG_MODULE_ENABLED */ | |
| 81 #define HAL_RTC_MODULE_ENABLED | |
| 82 /* #define HAL_SAI_MODULE_ENABLED */ | |
| 83 /* #define HAL_SD_MODULE_ENABLED */ | |
| 84 #define HAL_SPI_MODULE_ENABLED | |
| 85 /* #define HAL_TIM_MODULE_ENABLED */ | |
| 86 #define HAL_UART_MODULE_ENABLED | |
| 87 /* #define HAL_USART_MODULE_ENABLED */ | |
| 88 /* #define HAL_IRDA_MODULE_ENABLED */ | |
| 89 /* #define HAL_SMARTCARD_MODULE_ENABLED*/ | |
| 90 /* #define HAL_WWDG_MODULE_ENABLED */ | |
| 91 #define HAL_CORTEX_MODULE_ENABLED | |
| 92 /* #define HAL_PCD_MODULE_ENABLED */ | |
| 93 /* #define HAL_HCD_MODULE_ENABLED */ | |
| 94 | |
| 95 | |
| 96 /* ########################## HSE/HSI Values adaptation ##################### */ | |
| 97 /** | |
| 98 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. | |
| 99 * This value is used by the RCC HAL module to compute the system frequency | |
| 100 * (when HSE is used as system clock source, directly or through the PLL). | |
| 101 */ | |
| 102 #if !defined (HSE_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
103 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ |
| 38 | 104 #endif /* HSE_VALUE */ |
| 105 | |
| 106 #if !defined (HSE_STARTUP_TIMEOUT) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
107 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */ |
| 38 | 108 #endif /* HSE_STARTUP_TIMEOUT */ |
| 109 | |
| 110 /** | |
| 111 * @brief Internal High Speed oscillator (HSI) value. | |
| 112 * This value is used by the RCC HAL module to compute the system frequency | |
| 113 * (when HSI is used as system clock source, directly or through the PLL). | |
| 114 */ | |
| 115 #if !defined (HSI_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
116 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ |
| 38 | 117 #endif /* HSI_VALUE */ |
| 118 | |
| 119 /** | |
| 120 * @brief Internal Low Speed oscillator (LSI) value. | |
| 121 */ | |
| 122 #if !defined (LSI_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
123 #define LSI_VALUE ((uint32_t)40000U) |
| 38 | 124 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
| 125 The real value may vary depending on the variations | |
| 126 in voltage and temperature. */ | |
| 127 /** | |
| 128 * @brief External Low Speed oscillator (LSE) value. | |
| 129 */ | |
| 130 #if !defined (LSE_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
131 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ |
| 38 | 132 #endif /* LSE_VALUE */ |
| 133 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
134 #if !defined (LSE_STARTUP_TIMEOUT) |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
135 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
136 #endif /* LSE_STARTUP_TIMEOUT */ |
| 38 | 137 /** |
| 138 * @brief External clock source for I2S peripheral | |
| 139 * This value is used by the I2S HAL module to compute the I2S clock source | |
| 140 * frequency, this source is inserted directly through I2S_CKIN pad. | |
| 141 */ | |
| 142 #if !defined (EXTERNAL_CLOCK_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
143 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ |
| 38 | 144 #endif /* EXTERNAL_CLOCK_VALUE */ |
| 145 | |
| 146 /* Tip: To avoid modifying this file each time you need to use different HSE, | |
| 147 === you can define the HSE value in your toolchain compiler preprocessor. */ | |
| 148 | |
| 149 /* ########################### System Configuration ######################### */ | |
| 150 /** | |
| 151 * @brief This is the HAL system configuration section | |
| 152 */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
153 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ |
| 38 | 154 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
155 #define USE_RTOS 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
156 #define PREFETCH_ENABLE 1U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
157 #define INSTRUCTION_CACHE_ENABLE 1U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
158 #define DATA_CACHE_ENABLE 1U |
| 38 | 159 |
| 160 /* ########################## Assert Selection ############################## */ | |
| 161 /** | |
| 162 * @brief Uncomment the line below to expanse the "assert_param" macro in the | |
| 163 * HAL drivers code | |
| 164 */ | |
| 165 /* #define USE_FULL_ASSERT 1 */ | |
| 166 | |
| 167 /* ################## Ethernet peripheral configuration ##################### */ | |
| 168 | |
| 169 /* Section 1 : Ethernet peripheral configuration */ | |
| 170 | |
| 171 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
172 #define MAC_ADDR0 2U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
173 #define MAC_ADDR1 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
174 #define MAC_ADDR2 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
175 #define MAC_ADDR3 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
176 #define MAC_ADDR4 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
177 #define MAC_ADDR5 0U |
| 38 | 178 |
| 179 /* Definition of the Ethernet driver buffers size and count */ | |
| 180 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ | |
| 181 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
182 #define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
183 #define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
| 38 | 184 |
| 185 /* Section 2: PHY configuration section */ | |
| 186 | |
| 187 /* DP83848 PHY Address*/ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
188 #define DP83848_PHY_ADDRESS 0x01U |
| 38 | 189 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
190 #define PHY_RESET_DELAY ((uint32_t)0x000000FFU) |
| 38 | 191 /* PHY Configuration delay */ |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
192 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) |
| 38 | 193 |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
194 #define PHY_READ_TO ((uint32_t)0x0000FFFFU) |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
195 #define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) |
| 38 | 196 |
| 197 /* Section 3: Common PHY Registers */ | |
| 198 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
199 #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
200 #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ |
| 38 | 201 |
| 202 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ | |
| 203 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ | |
| 204 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ | |
| 205 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ | |
| 206 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ | |
| 207 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ | |
| 208 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ | |
| 209 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ | |
| 210 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ | |
| 211 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ | |
| 212 | |
| 213 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ | |
| 214 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ | |
| 215 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ | |
| 216 | |
| 217 /* Section 4: Extended PHY Registers */ | |
| 218 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
219 #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
220 #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
221 #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ |
| 38 | 222 |
| 223 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ | |
| 224 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ | |
| 225 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ | |
| 226 | |
| 227 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ | |
| 228 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ | |
| 229 | |
| 230 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ | |
| 231 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ | |
| 232 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
233 /* ################## SPI peripheral configuration ########################## */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
234 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
235 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
236 * Activated: CRC code is present inside driver |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
237 * Deactivated: CRC code cleaned from driver |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
238 */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
239 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
240 /*#define USE_SPI_CRC 1U*/ |
| 38 | 241 /* Includes ------------------------------------------------------------------*/ |
| 242 /** | |
| 243 * @brief Include module's header file | |
| 244 */ | |
| 245 | |
| 246 #ifdef HAL_RCC_MODULE_ENABLED | |
| 247 #include "stm32f4xx_hal_rcc.h" | |
| 248 #endif /* HAL_RCC_MODULE_ENABLED */ | |
| 249 | |
| 250 #ifdef HAL_GPIO_MODULE_ENABLED | |
| 251 #include "stm32f4xx_hal_gpio.h" | |
| 252 #endif /* HAL_GPIO_MODULE_ENABLED */ | |
| 253 | |
| 254 #ifdef HAL_DMA_MODULE_ENABLED | |
| 255 #include "stm32f4xx_hal_dma.h" | |
| 256 #endif /* HAL_DMA_MODULE_ENABLED */ | |
| 257 | |
| 258 #ifdef HAL_CORTEX_MODULE_ENABLED | |
| 259 #include "stm32f4xx_hal_cortex.h" | |
| 260 #endif /* HAL_CORTEX_MODULE_ENABLED */ | |
| 261 | |
| 262 #ifdef HAL_ADC_MODULE_ENABLED | |
| 263 #include "stm32f4xx_hal_adc.h" | |
| 264 #endif /* HAL_ADC_MODULE_ENABLED */ | |
| 265 | |
| 266 #ifdef HAL_CAN_MODULE_ENABLED | |
| 267 #include "stm32f4xx_hal_can.h" | |
| 268 #endif /* HAL_CAN_MODULE_ENABLED */ | |
| 269 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
270 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
271 #include "stm32f4xx_hal_can_legacy.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
272 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
273 |
| 38 | 274 #ifdef HAL_CRC_MODULE_ENABLED |
| 275 #include "stm32f4xx_hal_crc.h" | |
| 276 #endif /* HAL_CRC_MODULE_ENABLED */ | |
| 277 | |
| 278 #ifdef HAL_CRYP_MODULE_ENABLED | |
| 279 #include "stm32f4xx_hal_cryp.h" | |
| 280 #endif /* HAL_CRYP_MODULE_ENABLED */ | |
| 281 | |
| 282 #ifdef HAL_DMA2D_MODULE_ENABLED | |
| 283 #include "stm32f4xx_hal_dma2d.h" | |
| 284 #endif /* HAL_DMA2D_MODULE_ENABLED */ | |
| 285 | |
| 286 #ifdef HAL_DAC_MODULE_ENABLED | |
| 287 #include "stm32f4xx_hal_dac.h" | |
| 288 #endif /* HAL_DAC_MODULE_ENABLED */ | |
| 289 | |
| 290 #ifdef HAL_DCMI_MODULE_ENABLED | |
| 291 #include "stm32f4xx_hal_dcmi.h" | |
| 292 #endif /* HAL_DCMI_MODULE_ENABLED */ | |
| 293 | |
| 294 #ifdef HAL_ETH_MODULE_ENABLED | |
| 295 #include "stm32f4xx_hal_eth.h" | |
| 296 #endif /* HAL_ETH_MODULE_ENABLED */ | |
| 297 | |
| 298 #ifdef HAL_FLASH_MODULE_ENABLED | |
| 299 #include "stm32f4xx_hal_flash.h" | |
| 300 #endif /* HAL_FLASH_MODULE_ENABLED */ | |
| 301 | |
| 302 #ifdef HAL_SRAM_MODULE_ENABLED | |
| 303 #include "stm32f4xx_hal_sram.h" | |
| 304 #endif /* HAL_SRAM_MODULE_ENABLED */ | |
| 305 | |
| 306 #ifdef HAL_NOR_MODULE_ENABLED | |
| 307 #include "stm32f4xx_hal_nor.h" | |
| 308 #endif /* HAL_NOR_MODULE_ENABLED */ | |
| 309 | |
| 310 #ifdef HAL_NAND_MODULE_ENABLED | |
| 311 #include "stm32f4xx_hal_nand.h" | |
| 312 #endif /* HAL_NAND_MODULE_ENABLED */ | |
| 313 | |
| 314 #ifdef HAL_PCCARD_MODULE_ENABLED | |
| 315 #include "stm32f4xx_hal_pccard.h" | |
| 316 #endif /* HAL_PCCARD_MODULE_ENABLED */ | |
| 317 | |
| 318 #ifdef HAL_SDRAM_MODULE_ENABLED | |
| 319 #include "stm32f4xx_hal_sdram.h" | |
| 320 #endif /* HAL_SDRAM_MODULE_ENABLED */ | |
| 321 | |
| 322 #ifdef HAL_HASH_MODULE_ENABLED | |
| 323 #include "stm32f4xx_hal_hash.h" | |
| 324 #endif /* HAL_HASH_MODULE_ENABLED */ | |
| 325 | |
| 326 #ifdef HAL_I2C_MODULE_ENABLED | |
| 327 #include "stm32f4xx_hal_i2c.h" | |
| 328 #endif /* HAL_I2C_MODULE_ENABLED */ | |
| 329 | |
| 330 #ifdef HAL_I2S_MODULE_ENABLED | |
| 331 #include "stm32f4xx_hal_i2s.h" | |
| 332 #endif /* HAL_I2S_MODULE_ENABLED */ | |
| 333 | |
| 334 #ifdef HAL_IWDG_MODULE_ENABLED | |
| 335 #include "stm32f4xx_hal_iwdg.h" | |
| 336 #endif /* HAL_IWDG_MODULE_ENABLED */ | |
| 337 | |
| 338 #ifdef HAL_LTDC_MODULE_ENABLED | |
| 339 #include "stm32f4xx_hal_ltdc.h" | |
| 340 #endif /* HAL_LTDC_MODULE_ENABLED */ | |
| 341 | |
| 342 #ifdef HAL_PWR_MODULE_ENABLED | |
| 343 #include "stm32f4xx_hal_pwr.h" | |
| 344 #endif /* HAL_PWR_MODULE_ENABLED */ | |
| 345 | |
| 346 #ifdef HAL_RNG_MODULE_ENABLED | |
| 347 #include "stm32f4xx_hal_rng.h" | |
| 348 #endif /* HAL_RNG_MODULE_ENABLED */ | |
| 349 | |
| 350 #ifdef HAL_RTC_MODULE_ENABLED | |
| 351 #include "stm32f4xx_hal_rtc.h" | |
| 352 #endif /* HAL_RTC_MODULE_ENABLED */ | |
| 353 | |
| 354 #ifdef HAL_SAI_MODULE_ENABLED | |
| 355 #include "stm32f4xx_hal_sai.h" | |
| 356 #endif /* HAL_SAI_MODULE_ENABLED */ | |
| 357 | |
| 358 #ifdef HAL_SD_MODULE_ENABLED | |
| 359 #include "stm32f4xx_hal_sd.h" | |
| 360 #endif /* HAL_SD_MODULE_ENABLED */ | |
| 361 | |
| 362 #ifdef HAL_SPI_MODULE_ENABLED | |
| 363 #include "stm32f4xx_hal_spi.h" | |
| 364 #endif /* HAL_SPI_MODULE_ENABLED */ | |
| 365 | |
| 366 #ifdef HAL_TIM_MODULE_ENABLED | |
| 367 #include "stm32f4xx_hal_tim.h" | |
| 368 #endif /* HAL_TIM_MODULE_ENABLED */ | |
| 369 | |
| 370 #ifdef HAL_UART_MODULE_ENABLED | |
| 371 #include "stm32f4xx_hal_uart.h" | |
| 372 #endif /* HAL_UART_MODULE_ENABLED */ | |
| 373 | |
| 374 #ifdef HAL_USART_MODULE_ENABLED | |
| 375 #include "stm32f4xx_hal_usart.h" | |
| 376 #endif /* HAL_USART_MODULE_ENABLED */ | |
| 377 | |
| 378 #ifdef HAL_IRDA_MODULE_ENABLED | |
| 379 #include "stm32f4xx_hal_irda.h" | |
| 380 #endif /* HAL_IRDA_MODULE_ENABLED */ | |
| 381 | |
| 382 #ifdef HAL_SMARTCARD_MODULE_ENABLED | |
| 383 #include "stm32f4xx_hal_smartcard.h" | |
| 384 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ | |
| 385 | |
| 386 #ifdef HAL_WWDG_MODULE_ENABLED | |
| 387 #include "stm32f4xx_hal_wwdg.h" | |
| 388 #endif /* HAL_WWDG_MODULE_ENABLED */ | |
| 389 | |
| 390 #ifdef HAL_PCD_MODULE_ENABLED | |
| 391 #include "stm32f4xx_hal_pcd.h" | |
| 392 #endif /* HAL_PCD_MODULE_ENABLED */ | |
| 393 | |
| 394 #ifdef HAL_HCD_MODULE_ENABLED | |
| 395 #include "stm32f4xx_hal_hcd.h" | |
| 396 #endif /* HAL_HCD_MODULE_ENABLED */ | |
| 397 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
398 #ifdef HAL_DSI_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
399 #include "stm32f4xx_hal_dsi.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
400 #endif /* HAL_DSI_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
401 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
402 #ifdef HAL_QSPI_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
403 #include "stm32f4xx_hal_qspi.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
404 #endif /* HAL_QSPI_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
405 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
406 #ifdef HAL_CEC_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
407 #include "stm32f4xx_hal_cec.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
408 #endif /* HAL_CEC_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
409 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
410 #ifdef HAL_FMPI2C_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
411 #include "stm32f4xx_hal_fmpi2c.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
412 #endif /* HAL_FMPI2C_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
413 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
414 #ifdef HAL_SPDIFRX_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
415 #include "stm32f4xx_hal_spdifrx.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
416 #endif /* HAL_SPDIFRX_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
417 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
418 #ifdef HAL_DFSDM_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
419 #include "stm32f4xx_hal_dfsdm.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
420 #endif /* HAL_DFSDM_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
421 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
422 #ifdef HAL_LPTIM_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
423 #include "stm32f4xx_hal_lptim.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
424 #endif /* HAL_LPTIM_MODULE_ENABLED */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
425 |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
426 #ifdef HAL_MMC_MODULE_ENABLED |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
427 #include "stm32f4xx_hal_mmc.h" |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
428 #endif /* HAL_MMC_MODULE_ENABLED */ |
| 38 | 429 /* Exported macro ------------------------------------------------------------*/ |
| 430 #ifdef USE_FULL_ASSERT | |
| 431 /** | |
| 432 * @brief The assert_param macro is used for function's parameters check. | |
| 433 * @param expr: If expr is false, it calls assert_failed function | |
| 434 * which reports the name of the source file and the source | |
| 435 * line number of the call that failed. | |
| 436 * If expr is true, it returns no value. | |
| 437 * @retval None | |
| 438 */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
439 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
| 38 | 440 /* Exported functions ------------------------------------------------------- */ |
| 441 void assert_failed(uint8_t* file, uint32_t line); | |
| 442 #else | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
443 #define assert_param(expr) ((void)0U) |
| 38 | 444 #endif /* USE_FULL_ASSERT */ |
| 445 | |
| 446 | |
| 447 #ifdef __cplusplus | |
| 448 } | |
| 449 #endif | |
| 450 | |
| 451 #endif /* STM32F4xx_HAL_CONF_H */ | |
| 452 | |
| 453 | |
| 454 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |