Mercurial > public > ostc4
annotate Discovery/Src/show_logbook.c @ 580:08af5d707c5a
Bugfix bad resolution of compass LSM303AGR:
The values of the variant LSM303AGR were more instabled compared to other variants. Root cause was that low power and high resolution are set in different registers and both options were enabled what is an invalid configuration => most likely the request for high resolution was ignored. To fix this the low power mode is only set in sleep and the high resolution is used in normal operation => compass performance same as in other variants.
| author | Ideenmodellierer |
|---|---|
| date | Sat, 12 Dec 2020 19:16:37 +0100 |
| parents | 1c95f811967c |
| children | 3860b8fa4b29 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/show_logbook.c | |
| 5 /// \brief show_logbook_logbook_show_log_page1 / | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 07-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include "base.h" | |
| 30 #include "logbook.h" | |
| 31 #include "gfx_colors.h" | |
| 32 #include "gfx_engine.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "show_logbook.h" | |
| 35 #include "unit.h" | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
36 #include "configuration.h" |
| 38 | 37 |
| 38 #include <stdint.h> | |
| 39 #include <stdio.h> | |
| 40 #include <stdlib.h> // for abs() | |
| 41 | |
| 484 | 42 #define LOG_BORDER_OFFSET (50u) /* text offset from left / right display to text start/end */ |
| 43 | |
| 38 | 44 /* Private variables ---------------------------------------------------------*/ |
| 45 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
46 static GFX_DrawCfgScreen tLOGscreen; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
47 static GFX_DrawCfgScreen tLOGbackground; |
| 38 | 48 |
| 49 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
50 static void print_gas_name(char* output,uint8_t lengh,uint8_t oxygen,uint8_t helium); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
51 static int16_t get_colour(int16_t color); |
| 38 | 52 |
| 53 /* Overview */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
54 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 55 /* Temperature */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
56 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 57 /* Gas List */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
58 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 59 /* ppO2 */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
60 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 61 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
62 static inline uint32_t MaxU32LOG(uint32_t a, uint32_t b) |
| 38 | 63 { |
| 64 return((a>b)?a:b); | |
| 65 } | |
| 66 | |
| 67 /** | |
| 68 ****************************************************************************** | |
| 69 * @brief GFX write label. / print coordinate system & depth graph | |
| 70 * @author Peter Ryser | |
| 71 * @version V0.0.1 | |
| 72 * @date 07-July-2014 | |
| 73 ****************************************************************************** | |
| 74 * | |
| 75 * @param hgfx: | |
| 76 * @param window: WindowGimpStyle | |
| 77 * @param mode: different modes depending witch page uses the function | |
| 78 * @param dataLength: | |
| 79 * @param depthdata: | |
| 80 * @param colordata: 1 | |
| 81 * @retval None | |
| 82 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
83 static void show_logbook_draw_depth_graph(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards, SWindowGimpStyle* window, short mode, uint16_t dataLength, uint16_t* depthdata, uint8_t * colordata, uint16_t * decostopdata) |
| 38 | 84 { |
| 85 SLogbookHeader logbookHeader; | |
| 86 SWindowGimpStyle wintemp = *window; | |
| 87 SWindowGimpStyle winsmal; | |
| 88 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 89 int divetime = logbookHeader.diveTimeMinutes; | |
| 90 int maxDepth = logbookHeader.maxDepth/100; | |
| 91 | |
| 92 int16_t saveBottom = wintemp.bottom; | |
| 93 int16_t saveTop = 0 - wintemp.top; | |
| 94 | |
| 95 //*** Horisontal (depth) *************************************************** | |
| 96 | |
| 97 //--- calc depth lines and labels -- | |
| 98 int vscale = 0; | |
| 99 int vstep = 0; | |
| 100 | |
| 101 vstep = maxDepth / 5; | |
| 102 vscale = vstep * 5; | |
| 103 if(vscale < maxDepth) | |
| 104 { | |
| 105 vstep += 1; | |
| 106 vscale += 5; | |
| 107 } | |
| 108 /* | |
| 109 if(vscale < | |
| 110 for(int i=1; i <= 20; i++) | |
| 111 { | |
| 112 vscale = i * 25; | |
| 113 vstep = i * 5; | |
| 114 if( vscale > maxDepth) | |
| 115 break; | |
| 116 } | |
| 117 */ | |
| 118 //--- print depth labels --- | |
| 119 winsmal.left = wintemp.left - 48; | |
| 120 winsmal.top = wintemp.top - 3; | |
| 121 winsmal.right = wintemp.left -1; | |
| 122 winsmal.bottom = winsmal.top + 16; | |
| 123 | |
| 567 | 124 if(settingsGetPointer()->nonMetricalSystem) |
| 125 { | |
| 126 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[ft]"); | |
| 127 } | |
| 128 else | |
| 129 { | |
| 130 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[m]"); | |
| 131 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
132 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
133 // winsmal.left = wintemp.left - 48; |
| 38 | 134 char msg[3]; |
| 135 float deltaline = ((float)(wintemp.bottom - wintemp.top))/5; | |
| 136 for(int i = 1; i<=5; i++) | |
| 137 { | |
| 138 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 139 winsmal.bottom = winsmal.top + 16; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
140 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
141 // winsmal.right = wintemp.left - 2; |
| 567 | 142 snprintf(msg,5,"%i",unit_depth_integer(i * vstep)); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
143 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 144 } |
| 145 | |
| 146 //vertical (Time) ******************************************************************* | |
| 147 //--- calc time lines and labels -- | |
| 148 int timestep = 0; | |
| 149 int lines = 0; | |
| 150 for(int i=1; i <= 60; i++) | |
| 151 { | |
| 152 timestep = i * 5; | |
| 153 lines = divetime/timestep; | |
| 154 if(lines < 7) | |
| 155 { | |
| 156 break; | |
| 157 } | |
| 158 } | |
| 159 //*** print coordinate system grit *** | |
| 160 int winwidth = wintemp.right - wintemp.left; | |
| 161 float vdeltaline = ((float)(winwidth * timestep))/divetime; | |
| 162 GFX_draw_Grid( &tLOGbackground,wintemp, 0, vdeltaline, 5,0, CLUT_LogbookGrid); | |
| 163 | |
| 164 | |
| 165 //--- print time labels --- | |
| 166 winsmal.left = wintemp.left; | |
| 167 winsmal.top = wintemp.top - 40; | |
| 168 winsmal.right = winsmal.left + 60; | |
| 169 winsmal.bottom = winsmal.top + 16; | |
| 170 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
171 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"min"); |
| 38 | 172 for(int i = 1; i<=lines; i++) |
| 173 { | |
| 174 winsmal.left= wintemp.left + vdeltaline * i - 15; | |
| 175 winsmal.right = winsmal.left + 30; | |
| 176 snprintf(msg,5,"%3i",i * timestep); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
177 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 178 } |
| 179 winsmal.left = wintemp.left;// - 9; | |
| 180 winsmal.top = wintemp.top - 40; | |
| 181 winsmal.right = winsmal.left + 60; | |
| 182 | |
| 183 //--- print depth graph --- | |
| 184 //adapt window | |
| 185 int winhight = wintemp.bottom - wintemp.top; | |
| 186 int newhight = (winhight * maxDepth)/vscale; | |
| 187 wintemp.bottom = wintemp.top + newhight; | |
| 188 //wintemp.fontcolor = LOGBOOK_GRAPH_DEPTH; | |
| 189 | |
| 190 int datamax = 0; | |
| 191 for(int i=0;i<dataLength;i++) | |
| 192 { | |
| 193 if(depthdata[i]>datamax) | |
| 194 datamax = depthdata[i]; | |
| 195 } | |
| 196 | |
| 197 if(decostopdata) | |
| 198 { | |
| 199 if(dataLength <= 1000) | |
| 200 { | |
| 201 uint8_t colortemp[1000]; | |
| 202 | |
| 203 for(int i = 0; i<dataLength; i++) | |
| 204 { | |
| 205 if(decostopdata[i] > depthdata[i]) | |
| 206 { | |
| 207 colortemp[i] = CLUT_WarningRed; | |
| 208 } | |
| 209 else | |
| 210 { | |
| 211 colortemp[i] = CLUT_NiceGreen; | |
| 212 } | |
| 213 } | |
|
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
150
diff
changeset
|
214 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, 0, colortemp); |
| 38 | 215 } |
| 216 else | |
| 217 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, CLUT_NiceGreen, NULL); | |
| 218 } | |
| 219 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
220 if(settingsGetPointer()->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
221 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
222 winsmal.right = 800 - wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
223 winsmal.left = 800 - wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
224 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
225 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
226 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
227 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
228 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
229 winsmal.right = wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
230 winsmal.left = wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
231 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
232 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
233 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
234 |
| 38 | 235 switch(mode) |
| 236 { | |
| 237 case 0: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
238 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 239 break; |
| 240 case 1: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
241 GFX_graph_print(hgfx,&winsmal,saveBottom,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 242 break; |
| 243 case 2: | |
| 244 if(*colordata) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
245 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 246 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
247 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 248 } |
| 249 } | |
| 250 | |
| 251 | |
| 252 | |
| 253 /** | |
| 254 ****************************************************************************** | |
| 255 * @brief scaleAdapt | |
| 256 * @author heinrichs weikamp gmbh | |
| 257 * @version V0.0.1 | |
| 258 * @date 29-Nov-2016 | |
| 259 ****************************************************************************** | |
| 260 * | |
| 261 * @param ... | |
| 262 * @retval *OutputStepOfScale, *OutputMaxValueOnScale, *OutputTop, *OutputBottom | |
| 263 | |
| 264 * fit to multiples of 1�C (data format is 1/10�C) | |
| 265 */ | |
| 266 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
267 static void scaleAdapt( int InputTop, int InputBottom, |
| 38 | 268 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 269 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 270 { | |
| 271 // uint16_t oldScale; | |
| 272 uint16_t newScale; | |
| 273 // uint16_t diff_newScale; | |
| 274 | |
| 275 // int16_t oldMaxOnScale; | |
| 276 int16_t newMaxOnScale; | |
| 277 // int16_t diff_newMaxOnScale; | |
| 278 _Bool negativeMaxValue = 0; | |
| 279 | |
| 280 // float oldRange; | |
| 281 float newRange; | |
| 282 | |
| 283 float sizeOfScreen; | |
| 284 // float InputTopValue; | |
| 285 // float InputBottomValue; | |
| 286 float screenToRangeRatio; | |
| 287 float diffOutMaxToMaxOnScale; | |
| 288 float diffOutMinToMaxOnScale; | |
| 289 int positonOutputMaxValue; | |
| 290 int positonOutputMinValue; | |
| 291 | |
| 292 | |
| 293 // scale | |
| 294 // oldScale = *OutputStepOfScale; | |
| 295 newScale = *OutputStepOfScale + 9; | |
| 296 newScale /= 10; | |
| 297 newScale *= 10; | |
| 298 // diff_newScale = newScale - *OutputStepOfScale; | |
| 299 // oldRange = 5 * oldScale; | |
| 300 newRange = 5 * newScale; | |
| 301 *OutputStepOfScale = newScale; | |
| 302 | |
| 303 // MaxValueOnScale | |
| 304 // oldMaxOnScale = *OutputMaxValueOnScale; | |
| 305 if(OutputMaxValueOnScale < 0) | |
| 306 { | |
| 307 negativeMaxValue = 1; | |
| 308 newMaxOnScale = 0 - *OutputMaxValueOnScale; | |
| 309 } | |
| 310 else | |
| 311 { | |
| 312 negativeMaxValue = 0; | |
| 313 newMaxOnScale = *OutputMaxValueOnScale; | |
| 314 } | |
| 315 newMaxOnScale += 9; | |
| 316 newMaxOnScale /= 10; | |
| 317 newMaxOnScale *= 10; | |
| 318 if(negativeMaxValue) | |
| 319 { | |
| 320 // diff_newMaxOnScale = newMaxOnScale + *OutputMaxValueOnScale; | |
| 321 *OutputMaxValueOnScale = 0 - newMaxOnScale; | |
| 322 } | |
| 323 else | |
| 324 { | |
| 325 // diff_newMaxOnScale = newMaxOnScale - *OutputMaxValueOnScale; | |
| 326 *OutputMaxValueOnScale = newMaxOnScale; | |
| 327 } | |
| 328 | |
| 329 | |
| 330 // new coordinates | |
| 331 sizeOfScreen = 1 + InputBottom - InputTop; | |
| 332 // InputTopValue = *OutputMaxValueOnScale; | |
| 333 // InputBottomValue = InputTopValue + (6 * *OutputStepOfScale); | |
| 334 | |
| 335 screenToRangeRatio = sizeOfScreen / newRange; | |
| 336 diffOutMaxToMaxOnScale = abs(*OutputMaxValueOnScale) - abs(*OutputMaxValue); | |
| 337 // diffOutMinToMax = abs(*OutputMinValue - *OutputMaxValue); | |
| 338 diffOutMinToMaxOnScale = abs(*OutputMaxValueOnScale - *OutputMinValue); | |
| 339 | |
| 340 positonOutputMaxValue = (int)(diffOutMaxToMaxOnScale * screenToRangeRatio); | |
| 341 positonOutputMaxValue += *OutputTop; | |
| 342 positonOutputMinValue = (int)(diffOutMinToMaxOnScale * screenToRangeRatio); | |
| 343 positonOutputMinValue += *OutputTop; | |
| 344 // positonOutputMinValue = (int)(diffOutMinToMax * screenToRangeRatio); | |
| 345 // positonOutputMinValue += positonOutputMaxValue; | |
| 346 *OutputTop = positonOutputMaxValue; | |
| 347 *OutputBottom = positonOutputMinValue; | |
| 348 } | |
| 349 | |
| 350 | |
| 351 /** | |
| 352 ****************************************************************************** | |
| 353 * @brief scaleHelper | |
| 354 * @author heinrichs weikamp gmbh | |
| 355 * @version V0.0.1 | |
| 356 * @date 13-Oct-2016 | |
| 357 ****************************************************************************** | |
| 358 * | |
| 359 * @param hgfx: | |
| 360 * @retval None | |
| 361 | |
| 362 * pixel 50 oben | |
| 363 * pixel 439 unten | |
| 364 * pixel 390 gesamt h�he | |
| 365 | |
| 366 * for temperature, input is �C * 10 | |
| 367 */ | |
| 368 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
369 static void scaleHelper( uint16_t InputDataLength, int16_t *InputDataArray, int InputTop, int InputBottom, |
| 38 | 370 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 371 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 372 { | |
| 373 int32_t datamin = INT16_MAX; // 32 bit for delta calculation ( delta is unsigned -> value can be 2x INT16_MAX) | |
| 374 int32_t datamax = INT16_MIN; | |
| 375 uint16_t deltaMinMax = 1; | |
| 376 // uint16_t deltaMinMaxUsed = 1; | |
| 377 // uint16_t digits = 1; | |
| 378 // uint16_t scaler = 1; | |
| 379 uint32_t step = 1; | |
| 380 const int sizeOfScreen = InputBottom - InputTop; | |
| 381 float pixel2range = 1.0; | |
| 382 | |
| 383 // min, max, deltaMinMax, OutputMinValue, OutputMaxValue | |
| 384 for(uint16_t i = 0; i < InputDataLength; i++) | |
| 385 { | |
| 386 if(InputDataArray[i] > datamax) | |
| 387 datamax = InputDataArray[i]; | |
| 388 | |
| 389 if(InputDataArray[i] < datamin) | |
| 390 datamin = InputDataArray[i]; | |
| 391 } | |
| 392 | |
| 393 deltaMinMax = (uint16_t)(datamax - datamin); | |
| 394 | |
| 395 *OutputMinValue = (int16_t)datamin; | |
| 396 *OutputMaxValue = (int16_t)datamax; | |
| 397 | |
| 398 // step | |
| 399 step = deltaMinMax / 5; | |
| 400 while(deltaMinMax > (step * 5)) | |
| 401 { | |
| 402 step += 1; | |
| 403 } | |
| 404 pixel2range = ((float)sizeOfScreen) / (step * 5); | |
| 405 | |
| 406 *OutputStepOfScale = (uint16_t)step; | |
| 407 *OutputMaxValueOnScale = *OutputMaxValue; | |
| 408 *OutputTop = InputTop; | |
| 409 *OutputBottom = ((int)(pixel2range * deltaMinMax)) + *OutputTop; | |
| 410 } | |
| 411 | |
| 412 /** | |
| 413 ****************************************************************************** | |
| 414 * @brief show_logbook_logbook_show_log_page1 / | |
| 415 * @author Peter Ryser | |
| 416 * @version V0.0.1 | |
| 417 * @date 07-July-2014 | |
| 418 ****************************************************************************** | |
| 419 * | |
| 420 * @param hgfx: | |
| 421 * @retval None | |
| 422 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
423 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx,uint8_t StepBackwards) |
| 38 | 424 { |
| 425 SWindowGimpStyle wintemp; | |
| 426 SWindowGimpStyle winsmal; | |
| 484 | 427 wintemp.left = LOG_BORDER_OFFSET; |
| 38 | 428 wintemp.right = 799 - wintemp.left; |
| 484 | 429 wintemp.top = LOG_BORDER_OFFSET; |
| 38 | 430 wintemp.bottom = 479 - 40; |
| 567 | 431 char timeSuffix; |
| 432 uint8_t hoursToDisplay; | |
| 38 | 433 |
| 434 SLogbookHeader logbookHeader; | |
| 435 logbook_getHeader(StepBackwards ,&logbookHeader); | |
| 436 | |
| 437 uint16_t depthdata[1000] = { 0 }; | |
| 438 uint8_t gasdata[1000] = { 0 }; | |
| 439 int16_t tempdata[1000] = { 0 }; | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
440 uint16_t tankdata[1000] = { 0 }; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
441 |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
442 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
443 uint16_t bottlePressureStart = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
444 uint16_t bottlePressureEnd = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
445 uint16_t loop = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
446 #endif |
| 38 | 447 |
| 448 uint16_t dataLength = 0; | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
449 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, tankdata); |
| 38 | 450 |
| 451 //Print Date | |
| 452 uint8_t year = logbookHeader.dateYear; | |
| 453 uint8_t month = logbookHeader.dateMonth; | |
| 454 uint8_t day = logbookHeader.dateDay; | |
| 455 char text[40]; | |
| 456 snprintf(text, 20, "20%02i-%02i-%02i", year, month, day); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
457 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
458 Gfx_write_label_var(hgfx, 30, 250,10, &FontT42,CLUT_GasSensor1,text); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
459 |
| 38 | 460 |
| 461 // Print logbook number with offset | |
| 462 if(settingsGetPointer()->logbookOffset) | |
| 463 { | |
| 464 int32_t logNumber; | |
| 465 logNumber = settingsGetPointer()->logbookOffset - StepBackwards; | |
| 466 if(logNumber < 0) | |
| 467 logNumber = 0; | |
| 468 else | |
| 469 if(logNumber > 9999) | |
| 470 logNumber = 9999; | |
| 471 | |
| 457 | 472 snprintf(text,20,"#%ld",logNumber); |
| 38 | 473 Gfx_write_label_var(hgfx, 300, 590,10, &FontT42,CLUT_GasSensor1,text); |
| 474 } | |
| 475 | |
| 476 //Print time | |
| 477 uint8_t hour = logbookHeader.timeHour; | |
| 478 uint8_t minute = logbookHeader.timeMinute; | |
| 567 | 479 |
| 480 if (settingsGetPointer()->amPMTime) | |
| 481 { | |
| 482 if (logbookHeader.timeHour > 11) | |
| 483 { | |
| 484 timeSuffix = 'P'; | |
| 485 } | |
| 486 else | |
| 487 { | |
| 488 timeSuffix = 'A'; | |
| 489 } | |
| 490 | |
| 491 if (logbookHeader.timeHour % 12 == 0) | |
| 492 { | |
| 493 hoursToDisplay = 12; | |
| 494 } | |
| 495 else | |
| 496 { | |
| 497 hoursToDisplay = (logbookHeader.timeHour % 12); | |
| 498 } | |
| 499 | |
| 500 snprintf(text,20,"\002%02i:%02i %cM",hoursToDisplay,minute,timeSuffix); | |
| 501 } | |
| 502 else | |
| 503 { | |
| 504 hoursToDisplay = logbookHeader.timeHour; | |
| 505 snprintf(text,20,"\002%02i:%02i",hoursToDisplay,minute); | |
| 506 } | |
| 507 | |
| 508 | |
| 484 | 509 Gfx_write_label_var(hgfx, 600, wintemp.right,10, &FontT42,CLUT_GasSensor1,text); |
| 38 | 510 |
| 511 //Print Dive Mode (OC/CCR/...) | |
| 512 switch(logbookHeader.diveMode) | |
| 513 { | |
| 514 case DIVEMODE_OC: | |
| 515 snprintf(text,20,"open circuit"); | |
| 516 break; | |
| 517 case DIVEMODE_CCR: | |
| 518 snprintf(text,20,"closed circuit"); | |
| 519 break; | |
| 520 case DIVEMODE_Gauge: | |
| 521 snprintf(text,20,"Gauge"); | |
| 522 break; | |
| 523 case DIVEMODE_Apnea: | |
| 524 snprintf(text,20,"Apnea"); | |
| 525 break; | |
| 526 } | |
| 527 Gfx_write_label_var(hgfx, 30, 250,60, &FontT42,CLUT_GasSensor4,text); | |
| 528 | |
| 529 // Decomodel | |
| 530 if(logbookHeader.diveMode <= DIVEMODE_CCR) | |
| 531 { | |
| 532 switch(logbookHeader.decoModel) | |
| 533 { | |
| 534 case GF_MODE: | |
| 535 snprintf(text,20,"\002GF%u/%u",logbookHeader.gfLow_or_Vpm_conservatism,logbookHeader.gfHigh); | |
| 484 | 536 break; |
| 38 | 537 case VPM_MODE: |
| 538 snprintf(text,20,"\002VPM +%u",logbookHeader.gfLow_or_Vpm_conservatism); | |
| 484 | 539 break; |
| 540 default: | |
| 541 snprintf(text,20," "); /* no information to be displayed */ | |
| 542 break; | |
| 38 | 543 } |
| 484 | 544 Gfx_write_label_var(hgfx, 500, wintemp.right,60, &FontT42,CLUT_GasSensor1,text); |
| 38 | 545 } |
| 546 | |
| 547 //Write Dive Time | |
| 548 int minutes = logbookHeader.diveTimeMinutes; | |
| 549 int seconds = logbookHeader.diveTimeSeconds; | |
| 550 int hours = minutes/60; | |
| 551 minutes -= hours * 60; | |
| 552 snprintf(text,20,"%02i:%02i:%02i",hours,minutes,seconds); | |
| 553 Gfx_write_label_var(hgfx, 30, 250,360, &FontT42,CLUT_GasSensor1,text); | |
| 554 Gfx_write_label_var(hgfx, 200, 250,360, &FontT42,CLUT_GasSensor4,"s"); | |
| 555 | |
| 556 // Max Depth | |
| 557 int maxdepth =logbookHeader.maxDepth/100; | |
| 558 int maxdepth_dcm = logbookHeader.maxDepth/10 - maxdepth * 10; | |
| 559 int top = 150; | |
| 560 if(settingsGetPointer()->nonMetricalSystem) | |
| 561 { | |
| 562 float maxDepthFeet = 0; | |
| 563 maxDepthFeet = unit_depth_float(((float)logbookHeader.maxDepth)/100); | |
| 564 snprintf(text,20,"%.0f",maxDepthFeet); | |
| 565 } | |
| 566 else | |
| 567 { | |
| 568 snprintf(text,20,"%i.%i",maxdepth,maxdepth_dcm); | |
| 569 } | |
| 570 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 571 winsmal.left = 30; | |
| 572 winsmal.top = top -3; | |
| 573 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
574 |
| 38 | 575 if(maxdepth < 10) |
| 576 { | |
| 577 winsmal.left = 137; | |
| 578 } | |
| 579 else if(maxdepth < 100) | |
| 580 { | |
| 581 winsmal.left = 151; | |
| 582 } | |
| 583 else | |
| 584 { | |
| 585 winsmal.left = 147; | |
| 586 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
587 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
588 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
589 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,top, &FontT24,CLUT_GasSensor4,"max"); |
| 38 | 590 snprintf(text,3,"%c%c" |
| 591 , unit_depth_char1() | |
| 592 , unit_depth_char2() | |
| 593 ); | |
| 594 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 595 | |
| 596 // Average Depth | |
| 597 int avrdepth =logbookHeader.averageDepth_mbar/100; | |
| 598 int avrdepth_dcm = logbookHeader.averageDepth_mbar/10 - avrdepth * 10; | |
| 599 top = 200; | |
| 600 if(settingsGetPointer()->nonMetricalSystem) | |
| 601 { | |
| 602 float avgDepthFeet = 0; | |
| 603 avgDepthFeet = unit_depth_float(((float)logbookHeader.averageDepth_mbar)/100); | |
| 604 snprintf(text,20,"%.0f",avgDepthFeet); | |
| 605 } | |
| 606 else | |
| 607 { | |
| 608 snprintf(text,20,"%i.%i",avrdepth,avrdepth_dcm); | |
| 609 } | |
| 610 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
611 |
| 38 | 612 winsmal.left = 30; |
| 613 winsmal.top = top -3; | |
| 614 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
615 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
616 /* put avg behind previous string */ |
| 38 | 617 if(avrdepth < 10) |
| 618 { | |
| 619 winsmal.left = 137 ; | |
| 620 } | |
| 621 else if(avrdepth < 100) | |
| 622 { | |
| 623 winsmal.left = 151; | |
| 624 } | |
| 625 else | |
| 626 { | |
| 627 winsmal.left = 147; | |
| 628 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
629 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
630 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
631 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor4,"avg"); |
| 38 | 632 snprintf(text,3,"%c%c" |
| 633 , unit_depth_char1() | |
| 634 , unit_depth_char2() | |
| 635 ); | |
| 636 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 637 // Temperature | |
| 638 top+= 50; | |
| 639 float temp_Temperature; | |
| 640 uint16_t start; | |
| 641 temp_Temperature = ((float)logbookHeader.minTemp)/10; | |
| 642 snprintf(text,20,"%.1f",unit_temperature_float(temp_Temperature)); | |
| 643 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 644 | |
| 645 if(settingsGetPointer()->nonMetricalSystem) | |
| 646 start = 121; | |
| 647 else if((logbookHeader.minTemp >= 0) && (logbookHeader.minTemp < 10)) | |
| 648 start = 100; | |
| 649 else if((logbookHeader.minTemp >= -10) && (logbookHeader.minTemp < 100)) | |
| 650 start = 114; | |
| 651 else | |
| 652 start = 121; | |
| 653 | |
| 654 text[0] = '\140'; | |
| 655 if(settingsGetPointer()->nonMetricalSystem) | |
| 656 text[1] = 'F'; | |
| 657 else | |
| 658 text[1] = 'C'; | |
| 659 text[2] = 0; | |
| 660 | |
| 661 Gfx_write_label_var(hgfx, start, 300,top, &FontT42,CLUT_GasSensor4,text); | |
| 662 | |
| 663 // CNS | |
| 664 snprintf(text,20,"CNS: %i %%",logbookHeader.maxCNS); | |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
665 Gfx_write_label_var(hgfx, 30, 250,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 666 |
| 667 // Surface Pressure | |
| 668 // snprintf(text,20,"\001%i\016\016 mbar",logbookHeader.surfacePressure_mbar); | |
| 669 // Gfx_write_label_var(hgfx,300,500,750, &FontT42,CLUT_GasSensor1,text); | |
| 670 // snprintf(text,40,"%i\016\016 mbar\017 (%i\016\016 m\017)",logbookHeader.surfacePressure_mbar, unit_SeaLevelRelation_integer(logbookHeader.surfacePressure_mbar)); | |
|
102
4276d56eb37c
hPa instead of mbar, enabled Spanish language
heinrichsweikamp
parents:
38
diff
changeset
|
671 snprintf(text,40,"%i\016\016 hPa\017",logbookHeader.surfacePressure_mbar); |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
672 Gfx_write_label_var(hgfx,320,600,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 673 |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
674 /* Show tank info */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
675 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
676 for(loop = 0; loop < dataLength; loop++) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
677 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
678 if((bottlePressureStart == 0) && (tankdata[loop] != 0)) /* find first pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
679 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
680 bottlePressureStart = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
681 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
682 if((tankdata[loop] != 0)) /* store last pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
683 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
684 bottlePressureEnd = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
685 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
686 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
687 if(bottlePressureStart != 0) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
688 { |
| 484 | 689 snprintf(text,40,"\002%i | %i\016\016 Bar\017",bottlePressureStart,bottlePressureEnd); |
| 690 Gfx_write_label_var(hgfx,450,wintemp.right,440, &FontT42,CLUT_GasSensor1,text); | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
691 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
692 #endif |
| 38 | 693 //--- print coordinate system & depth graph with gaschanges --- |
| 694 wintemp.left = 330; | |
| 695 wintemp.top = 160; | |
| 696 wintemp.bottom -= 40; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
697 |
| 38 | 698 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); |
| 699 } | |
| 700 | |
| 701 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
702 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 703 { |
| 704 //*** Page2: Depth and Temperature **** | |
| 705 | |
| 706 SWindowGimpStyle wintemp; | |
| 707 SWindowGimpStyle winsmal; | |
| 708 wintemp.left = 50; | |
| 709 wintemp.right = 799 - wintemp.left; | |
| 710 wintemp.top = 50; | |
| 711 wintemp.bottom = 479 - 40; | |
| 712 | |
| 713 SLogbookHeader logbookHeader; | |
| 714 | |
| 715 logbook_getHeader(StepBackwards,&logbookHeader); | |
| 716 uint16_t dataLength = 0; | |
| 717 uint16_t depthdata[1000]; | |
| 718 uint8_t gasdata[1000]; | |
| 719 int16_t tempdata[1000]; | |
| 720 uint16_t decoDepthdata[1000]; | |
| 721 uint16_t *pDecoDepthData = 0; | |
| 722 | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
723 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, decoDepthdata, NULL); |
| 38 | 724 |
| 725 for(int i = 0; i<dataLength; i++) | |
| 726 { | |
| 727 if(decoDepthdata[i] >= 300) | |
| 728 { | |
| 729 pDecoDepthData = decoDepthdata; | |
| 730 break; | |
| 731 } | |
| 732 } | |
| 733 //--- print coordinate system & depth graph --- | |
| 734 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, pDecoDepthData); | |
| 735 | |
| 736 //*** Temperature ************************************************* | |
| 737 | |
| 738 //--- print temperature labels --- | |
| 739 // input maxtmpline, tmpstep, deltaline | |
| 740 | |
| 741 winsmal.left = wintemp.right +6; | |
| 742 winsmal.top = wintemp.top - 3; | |
| 743 winsmal.right = wintemp.right + 30; | |
| 744 winsmal.bottom = winsmal.top + 16; | |
| 745 | |
| 567 | 746 if(settingsGetPointer()->nonMetricalSystem) |
| 747 { | |
| 748 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[F]"); | |
| 749 } | |
| 750 else | |
| 751 { | |
| 752 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[C]"); | |
| 753 } | |
| 38 | 754 |
| 755 int16_t minVal = 0; | |
| 756 int16_t maxVal = 0; | |
| 757 int newTop = 0; | |
| 758 int newBottom = 0; | |
| 759 uint16_t step = 0; | |
| 760 int16_t maxValTop = 0; | |
| 761 | |
| 762 scaleHelper(dataLength, tempdata, wintemp.top, wintemp.bottom, | |
| 763 &minVal, &maxVal, &newTop, &newBottom, | |
| 764 &step, &maxValTop); // newTop is wintemp.top | |
| 765 | |
| 766 scaleAdapt( wintemp.top, wintemp.bottom, | |
| 767 &minVal, &maxVal, &newTop, &newBottom, | |
| 768 &step, &maxValTop); | |
| 769 | |
| 770 // temperature in 1/10 �C | |
| 771 int deltaline = (1 + wintemp.bottom - wintemp.top)/5; | |
| 772 char msg[3]; | |
| 773 int tmp = maxValTop; | |
| 567 | 774 int converted; |
| 38 | 775 for(int i = 1; i<=5; i++) |
| 776 { | |
| 777 tmp -= step; | |
| 567 | 778 if(settingsGetPointer()->nonMetricalSystem) { |
| 779 converted = unit_temperature_integer(tmp); | |
| 780 } | |
| 781 else{ | |
| 782 converted = tmp; | |
| 783 } | |
| 38 | 784 //if(tmp < 0) |
| 785 //break; | |
| 786 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 787 winsmal.bottom = winsmal.top + 16; | |
| 567 | 788 if((converted >= 0) && (converted < 100)) |
| 789 snprintf(msg,2,"%1i",converted); | |
| 38 | 790 else |
| 567 | 791 snprintf(msg,3,"%2i",converted); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
792 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,msg); |
| 38 | 793 } |
| 794 | |
| 795 | |
| 796 //--- print temperature graph --- | |
| 797 // input tempdata[i], maxtmpline, mintmpline, maxTmp, minTmp, deltaline, wintemp.top, dataLength, datamax, | |
| 798 | |
| 799 //adapt window | |
| 800 wintemp.bottom = newBottom; | |
| 801 wintemp.top = newTop; | |
| 802 GFX_graph_print(hgfx,&wintemp,0,1,maxVal,minVal, (uint16_t *)tempdata,dataLength,CLUT_LogbookTemperature, NULL); | |
| 803 } | |
| 804 | |
| 805 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
806 static void build_logbook_test(uint8_t page, uint8_t StepBackwards) |
| 38 | 807 { |
| 808 uint32_t lastScreen,lastBackground; | |
| 809 | |
| 810 lastScreen = tLOGscreen.FBStartAdress; | |
| 811 lastBackground = tLOGbackground.FBStartAdress; | |
| 812 | |
| 813 tLOGscreen.FBStartAdress = getFrame(16); | |
| 814 tLOGscreen.ImageHeight = 480; | |
| 815 tLOGscreen.ImageWidth = 800; | |
| 816 tLOGscreen.LayerIndex = 1; | |
| 817 | |
| 818 tLOGbackground.FBStartAdress = getFrame(17); | |
| 819 tLOGbackground.ImageHeight = 480; | |
| 820 tLOGbackground.ImageWidth = 800; | |
| 821 tLOGbackground.LayerIndex = 0; | |
| 822 switch(page) | |
| 823 { | |
| 824 case 1: | |
| 825 show_logbook_logbook_show_log_page1(&tLOGscreen,StepBackwards); | |
| 826 break; | |
| 827 case 2: | |
| 828 show_logbook_logbook_show_log_page2(&tLOGscreen,StepBackwards); | |
| 829 break; | |
| 830 case 3: | |
| 831 show_logbook_logbook_show_log_page3(&tLOGscreen,StepBackwards); | |
| 832 break; | |
| 833 case 4: | |
| 834 show_logbook_logbook_show_log_page4(&tLOGscreen,StepBackwards); | |
| 835 break; | |
| 836 } | |
| 837 | |
| 838 releaseFrame(16,lastScreen); | |
| 839 releaseFrame(17,lastBackground); | |
| 840 } | |
| 841 | |
| 842 | |
| 843 void show_logbook_test(_Bool firstPage, uint8_t StepBackwards) | |
| 844 { | |
| 845 static uint8_t page = 1; | |
| 846 if(firstPage) | |
| 847 { | |
| 848 page = 1; | |
| 849 } | |
| 850 else | |
| 851 { | |
| 852 page++; | |
| 853 if(page > 4) | |
| 854 page = 1; | |
| 855 } | |
| 856 | |
| 857 build_logbook_test(page,StepBackwards); | |
| 858 // GFX_ResetLayer(TOP_LAYER); | |
| 859 // GFX_ResetLayer(BACKGRD_LAYER); | |
| 860 | |
| 861 set_globalState(StILOGSHOW); | |
| 862 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); | |
| 863 } | |
| 864 | |
| 865 | |
| 866 void show_logbook_exit(void) | |
| 867 { | |
| 868 releaseFrame(16,tLOGscreen.FBStartAdress); | |
| 869 releaseFrame(17,tLOGbackground.FBStartAdress); | |
| 870 } | |
| 871 | |
| 872 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
873 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 874 { |
| 875 SWindowGimpStyle wintemp; | |
| 876 SWindowGimpStyle winsmal; | |
| 877 wintemp.left = 50; | |
| 878 wintemp.right = 799 - wintemp.left; | |
| 879 wintemp.top = 50; | |
| 880 wintemp.bottom = 479 - 40; | |
| 881 | |
| 882 SLogbookHeader logbookHeader; | |
| 883 | |
| 884 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 885 uint16_t dataLength = 0; | |
| 886 uint16_t depthdata[1000]; | |
| 887 uint8_t gasdata[1000]; | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
888 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 889 |
| 890 //--- print coordinate system & depth graph with gaschanges --- | |
| 891 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); | |
| 892 | |
| 893 //--- print gas list --- | |
| 894 winsmal.left = wintemp.right - 190; | |
| 895 winsmal.right = winsmal.left + 150; | |
| 896 | |
| 897 char msg[15]; | |
| 898 char gas_name[15]; | |
| 899 int j = 0; | |
| 900 for(int i = 4;i >= 0;i--) | |
| 901 { | |
| 902 if(logbookHeader.gasordil[i].note.ub.active > 0) | |
| 903 { | |
| 904 j++; | |
| 905 winsmal.top = wintemp.bottom - 5 - j * 26 ; | |
| 906 winsmal.bottom = winsmal.top + 21 ; | |
| 907 uint8_t color = get_colour(i); | |
| 908 | |
| 909 print_gas_name(gas_name,15,logbookHeader.gasordil[i].oxygen_percentage,logbookHeader.gasordil[i].helium_percentage); | |
| 910 snprintf(msg,15,"G%i: %s",i + 1, gas_name); | |
| 911 //msg[10] = 0; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
912 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 913 } |
| 914 } | |
| 915 | |
| 916 //--- define buttons --- | |
| 917 /*if(*ghost_char_logfile_oxydata) | |
| 918 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page4, surf1_menu_logbook_show_log_next); | |
| 919 else | |
| 920 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 921 */ | |
| 922 } | |
| 923 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
924 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 925 { SWindowGimpStyle wintemp; |
| 926 SWindowGimpStyle winsmal; | |
| 927 wintemp.left = 50; | |
| 928 wintemp.right = 799 - wintemp.left; | |
| 929 wintemp.top = 50; | |
| 930 wintemp.bottom = 479 - 40; | |
| 931 uint8_t color = 0; | |
| 932 SLogbookHeader logbookHeader; | |
| 933 | |
| 934 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 935 uint16_t dataLength = 0; | |
| 936 uint16_t depthdata[1000]; | |
| 937 uint8_t gasdata[1000]; | |
| 938 uint16_t ppO2data[1000]; | |
| 939 uint16_t sensor2[1000]; | |
| 940 uint16_t sensor3[1000]; | |
| 941 uint16_t *setpoint = ppO2data; | |
| 942 uint16_t *sensor1 = ppO2data; | |
| 943 | |
| 944 | |
| 945 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
946 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, ppO2data, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 947 else |
| 948 { | |
| 949 if(logbookHeader.CCRmode == CCRMODE_FixedSetpoint) | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
950 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, setpoint, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 951 else |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
952 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, NULL, sensor1, sensor2, sensor3, NULL, NULL, NULL, NULL); |
| 38 | 953 } |
| 954 | |
| 955 | |
| 956 //--- print coordinate system & depth graph with bailout--- | |
| 957 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, NULL); | |
| 958 | |
| 959 | |
| 960 | |
| 961 //*** Desciption at bottom of page *************************** | |
| 962 winsmal.top = wintemp.bottom +2 ; | |
| 963 winsmal.bottom = winsmal.top + 16; | |
| 964 | |
| 965 | |
| 966 /*if(strcmp( (char*)ghost_char_logfile_text_oc_ccr,"ccr/bailout") == 0) | |
| 967 { | |
| 968 winsmal.left = wintemp.left + 2; | |
| 969 winsmal.right = winsmal.left + 55; | |
| 970 | |
| 971 oled_write(OVERLAY, &winsmal,"CCR -",false,true); | |
| 972 | |
| 973 winsmal.left = winsmal.right; | |
| 974 winsmal.right = winsmal.left + 90; | |
| 975 //winsmal.fontcolor = oled_get_colour(15); | |
| 976 oled_write(OVERLAY, &winsmal,"bailout",false,true); | |
| 977 } | |
| 978 else*/ | |
| 979 { | |
| 980 winsmal.left = wintemp.left + 2; | |
| 981 winsmal.right = winsmal.left + 55; | |
| 982 color = CLUT_GasSensor1;//LOGBOOK_GRAPH_DEPTH; | |
| 983 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
984 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"depth"); |
| 38 | 985 |
| 986 } | |
| 987 winsmal.left = 799 - 67;//wintemp.right -67; | |
| 988 winsmal.right = winsmal.left;// + 45; | |
| 989 | |
| 990 color = CLUT_LogbookTemperature;//LOGBOOK_GRAPH_DEPTH; | |
| 991 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
992 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002PP O2"); |
| 38 | 993 else |
| 994 if(logbookHeader.CCRmode != CCRMODE_Sensors) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
995 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SETPOINT"); |
| 38 | 996 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
997 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SENSORS"); |
| 38 | 998 |
| 999 //*** PP O2 **************************************************** | |
| 1000 //calc lines and labels | |
| 1001 int datamax = 0; | |
| 1002 int datamin = 10000; | |
| 1003 for(int i=1;i<dataLength;i++) | |
| 1004 { | |
| 1005 if(ppO2data[i]>datamax) | |
| 1006 datamax = ppO2data[i]; | |
| 1007 if(ppO2data[i]<datamin) | |
| 1008 datamin = ppO2data[i]; | |
| 1009 } | |
| 1010 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 1011 { | |
| 1012 for(int i=1;i<dataLength;i++) | |
| 1013 { | |
| 1014 if(sensor2[i]>datamax) | |
| 1015 datamax = sensor2[i]; | |
| 1016 if(sensor2[i]<datamin) | |
| 1017 datamin = sensor2[i]; | |
| 1018 if(sensor3[i]>datamax) | |
| 1019 datamax = sensor3[i]; | |
| 1020 if(sensor3[i]<datamin) | |
| 1021 datamin = sensor3[i]; | |
| 1022 } | |
| 1023 } | |
| 1024 float maxoxy = ((float)datamax)/100; | |
| 1025 float minoxy = ((float)datamin)/100; | |
| 1026 float oxystep = 0.5; | |
| 1027 float maxoxyline = 2.5; | |
| 1028 | |
| 1029 //--- print PP O2 labels ---- | |
| 1030 winsmal.left = wintemp.right + 2; | |
| 1031 winsmal.top = wintemp.top ; | |
| 1032 winsmal.right = wintemp.right + 30; | |
| 1033 winsmal.bottom = winsmal.top + 16; | |
| 1034 //winsmal.font = ft_tiny + ft_SLIM; | |
| 1035 color = CLUT_LogbookTemperature;// = LOGBOOK_GRAPH_TEMP; | |
| 1036 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1037 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"bar"); |
| 38 | 1038 |
| 1039 int deltaline = (wintemp.bottom - wintemp.top)/5; | |
| 1040 char msg[4]; | |
| 1041 float oxy = maxoxyline; | |
| 1042 for(int i = 1; i<=5; i++) | |
| 1043 { | |
| 1044 oxy -= oxystep; | |
| 1045 if(oxy < 0) | |
| 1046 break; | |
| 1047 winsmal.top = wintemp.top + deltaline * i - 8; | |
| 1048 winsmal.bottom = winsmal.top + 16; | |
| 1049 snprintf(msg,4,"%1.1f",oxy); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1050 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 1051 //oled_write(OVERLAY, &winsmal,msg,false,true); |
| 1052 } | |
| 1053 | |
| 1054 //--- print PP O2 graph --- | |
| 1055 //Adapt window | |
| 1056 float ftmp = ((maxoxyline - minoxy) * deltaline) /oxystep + wintemp.top; | |
| 1057 wintemp.bottom = ftmp; | |
| 1058 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1059 wintemp.bottom++; | |
| 1060 | |
| 1061 ftmp = wintemp.top + ((maxoxyline - maxoxy) * deltaline) /oxystep; | |
| 1062 wintemp.top = ftmp; | |
| 1063 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1064 wintemp.top++; | |
| 1065 wintemp.top = MaxU32LOG(wintemp.top ,0); | |
| 1066 if(wintemp.top < wintemp.bottom) | |
| 1067 { | |
| 1068 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 1069 { | |
| 1070 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1071 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor2,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1072 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor3,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1073 } | |
| 1074 else | |
| 1075 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1076 } | |
| 1077 else | |
| 1078 { | |
| 1079 point_t startPoint, stopPoint; | |
| 1080 startPoint.x = wintemp.left; | |
| 1081 stopPoint.x = wintemp.right; | |
| 1082 stopPoint.y = startPoint.y = 479 - wintemp.top; | |
| 1083 GFX_draw_colorline(hgfx, startPoint, stopPoint, CLUT_LogbookTemperature); | |
| 1084 } | |
| 1085 | |
| 1086 //--- define buttons --- | |
| 1087 //button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 1088 } | |
| 1089 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1090 static void print_gas_name(char* output,uint8_t length,uint8_t oxygen,uint8_t helium) |
| 38 | 1091 { |
| 1092 if(helium == 0) | |
| 1093 { | |
| 1094 if(oxygen == 21) | |
| 1095 snprintf(output, length, "Air"); | |
| 1096 else if(oxygen == 100) | |
| 1097 snprintf(output, length, "Oxy"); | |
| 1098 else | |
| 1099 snprintf(output, length, "NX%i",oxygen); | |
| 1100 } | |
| 1101 else | |
| 1102 { | |
| 1103 if((oxygen + helium) == 100) | |
| 1104 snprintf(output, length, "HX%i",oxygen); | |
| 1105 else | |
| 1106 snprintf(output, length, "TMX%i/%i", oxygen, helium); | |
| 1107 } | |
| 1108 | |
| 1109 } | |
| 1110 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1111 static int16_t get_colour(int16_t color) |
| 38 | 1112 { |
| 1113 return CLUT_GasSensor1 + color; | |
| 1114 } |