Mercurial > public > ostc4
annotate BootLoader/Src/base_bootlader.c @ 888:07af9efd7c13 Evo_2_23
Dev bugfix: Consider decogas in planner independen from calculation setting:
Some time ago the selection if a deco gas is used for live deco calculation or not was introduced. The planner did not consider the option as well causing it to ingnore deco gases in the planning what is not intended. To fix this the calculation flag is set at planer simulation start for all deco gases.
Beside this the cursor is now placed in the bottom line at "next" instead of the first menu item.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 03 Sep 2024 20:46:42 +0200 |
| parents | f012fcd7f465 |
| children |
| rev | line source |
|---|---|
| 30 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file BootLoader/Src/base_bootlader.c | |
| 5 /// \brief he beginning of it all. main() is part of this. | |
| 36 | 6 /// \author heinrichs weikamp gmbh |
| 30 | 7 /// \date 26-February-2014 |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 /** | |
| 27 * @detail The beginning of it all. main() is part of this. | |
| 28 * + Do the inits for hardware | |
| 29 * + check for button press or update process reset trigger | |
| 30 * + Do the inits for sub-systems like menu, dive screen etc. | |
| 31 * + Start IRQs | |
| 32 * + Start MainTasks not in IRQs | |
| 33 * @bug | |
| 34 * @warning | |
| 35 @verbatim | |
| 36 | |
| 37 ============================================================================== | |
| 38 ##### bootloader specific ##### | |
| 39 ============================================================================== | |
| 40 | |
| 36 | 41 151130 hw sleep on button3 |
| 30 | 42 (MX_tell_reset_logik_alles_ok() + DataEX_call() in endlos loop) |
| 43 | |
| 44 ============================================================================== | |
| 45 ##### bootloader specific ##### | |
| 46 ============================================================================== | |
| 47 | |
| 48 Bootloader info is set right here in this file. | |
| 49 The location is 0x0800A000 instead of 0x08050000 (firmware) | |
| 50 | |
| 51 on system reset (Menu Start Bootloader in firmware) the update process | |
| 52 is started automatically if no button is pressed | |
| 53 | |
| 54 if the right button is pressed the bootloader menu is started | |
| 55 | |
| 56 after update process (with update or empty) cleaning of EEPROM is started | |
| 57 afterwards the watchdog reset starts without activating the update process | |
| 58 | |
| 59 bluetooth chip is started in tComm on start of the mini bootloader firmware | |
| 60 | |
| 61 SMALLCPU_CSB_PIN must be re-set to 0 to communicate with small CPU / CPU2 / RTE | |
| 62 | |
| 63 for RealTerm to send file / firmware, Delays has to be increased to 0 | |
| 64 | |
| 65 RTE update / SPI1 with DMA gave IBUSERR, now it is working fine :-) 150828 | |
| 66 ============================================================================== | |
| 67 from standard firmware, parts might be invalid here: | |
| 68 ============================================================================== | |
| 69 ##### IRQs ##### | |
| 70 ============================================================================== | |
| 71 [..] The IRQs are very important and most functions should only run there. | |
| 72 | |
| 73 PreemptPriority are as follows | |
| 74 (#) 2 (low) sprintf _only_ here. Don't use in maintask or anywhere else. | |
| 75 Called by Buttons und Timer3 | |
| 76 Timer3 is 1/10 second | |
| 77 (#) 1 (mid) anything that should work while in IRQ2 like HalDelay(), VSYNC | |
| 78 and DMA2D Transfer Complete for housekeepingFrame(); | |
| 79 (#) 0 (high) _very very short_ interrupts like The HAL hardware part for | |
| 80 spi, uart, i2c. | |
| 81 | |
| 82 SubPriority within PreemptPriority give the order to execute. | |
| 83 Introduced 30.Oct.14 as it used by several HAL examples. | |
| 84 Three levelAmbients are available (2 low,1 mid,0 high) | |
| 85 | |
| 86 The STM32F4 has 4bits for IRQ levelAmbients, divided 2/2 in this code | |
| 87 with the NVIC_PRIORITYGROUP_2 setting. | |
| 88 | |
| 89 ============================================================================== | |
| 90 ##### MainTask ##### | |
| 91 ============================================================================== | |
| 92 [..] For everthing slow without importance to be 'in time'. | |
| 93 Like VPM and Buehlmann. | |
| 94 No sprintf and probably no GFX_SetFramesTopBottom() stuff neither. | |
| 95 If sprintf is called while sprintf is executed it blows up everything. | |
| 96 | |
| 97 ============================================================================== | |
| 98 ##### Frames / the external SDRAM ##### | |
| 99 ============================================================================== | |
| 100 [..] The SDRAM is handled by getFrame() and releaseFrame(). | |
| 101 Each frame with 800*480*2 Bytes. | |
| 102 Be carefull to release every frame | |
| 103 otherwise there will be a memory leakage over time. | |
| 104 housekeepingFrame() in the MainTask takes care of cleaning the frames. | |
| 105 All frames are filled with 0x00. This will be transparent with color of | |
| 106 CLUT_Font020 (is CLUT 0) if the alpha is set for a 16bit pair. | |
| 107 housekeepingFrame() delays the cleaning of frames still used as screen | |
| 108 buffer to prevent flickering. | |
| 109 | |
| 110 ============================================================================== | |
| 111 ##### Display ##### | |
| 112 ============================================================================== | |
| 113 [..] There is a Top layer, Bottom layer and background color. | |
| 114 All are perfectly alpha-blended by hardware. | |
| 115 | |
| 116 (#) top layer has 800x480 option function calls only | |
| 117 as it is not used for cursors here | |
| 118 (#) bottom layer has free size and start option to be used | |
| 119 for cursors (or sprites in the future ;-) | |
| 120 (#) background only black in the moment. | |
| 121 ToDo: Could be anything else for warnings etc. | |
| 122 if needed | |
| 123 | |
| 124 [..] Frame updates, switching and cursors is done with | |
| 125 | |
| 126 (#) GFX_SetFramesTopBottom() and the subset | |
| 127 GFX_SetFrameTop() + GFX_SetFrameBottom() | |
| 128 Those do not change anything on the display but give commands to.. | |
| 129 (#) GFX_change_LTDC() The only place that changes the pointer. | |
| 130 This prevents erratic behaviour if several changes | |
| 131 are made within one refresh rate of the screen. | |
| 132 Is called in IRQ by PD4 and HAL_GPIO_EXTI_IRQHandler | |
| 133 from VSYNC signal. | |
| 134 | |
| 135 [..] Content | |
| 136 | |
| 137 (#) Colors by LookupTable only. This could be modified by | |
| 138 system settings in the future. (gfx_color.h/.c) | |
| 139 | |
| 140 (#) Text by text_multilinguage.h/.c with one char | |
| 141 necessary only starting from '\x80' | |
| 142 with automatic language switch by | |
| 143 selected_language in SSettings | |
| 144 see openEdit_Language() in tMenuEditSystem.c | |
| 145 Therefore there are differnent functions | |
| 146 for example: | |
| 147 write_label_fix() for single char multilanguage | |
| 148 write_label_var() for strings that could include | |
| 149 multilanguage as well | |
| 150 see GFX_write_string() to get an overview of the controls | |
| 151 as well as the command list in gfx_engine.h | |
| 152 There is no clear before writing, text overlay is always on. | |
| 153 Many options to have LargeFont.SmallFont for numbers etc. | |
| 154 | |
| 155 ============================================================================== | |
| 156 ##### Update, DualBoot and build-in FLASH memory usage ##### | |
| 157 ============================================================================== | |
| 158 [..] Boot0 pin, Boot1/PB2 pin and BFB2 software bit control the behaviour. | |
| 159 PB2 should be tied to GND. | |
| 160 Boot0 == VDD -> bootloader on start, otherwise boot from Bank1 or Bank2 | |
| 161 depending on BFB2. | |
| 162 Bank2 contains the Fonts and should contain a proper test code in future | |
| 163 Bank1 is the main code (Bank1 is 1 MB too, usage as of Oct. 14 is 200 KB) | |
| 164 [..] Bootloader should be either UART or USB (on FS pins _only_) | |
| 165 USB HS to FS like on the Eval board does not work. | |
| 166 [..] Bootloader for the smaller CPU2 is implemented via the SPI used for DMA copy. | |
| 167 | |
| 168 ============================================================================== | |
| 169 ##### Connection to CPU2 (STM32F411 as of Oct.14 ##### | |
| 170 ============================================================================== | |
| 171 [..] Connected via SPI and DMA for every purpose. | |
| 172 two entire arrays are transfered for data security reasons | |
| 173 with respect to master (STM32F429) might interrupt internal | |
| 174 data copy in CPU2 (like hi byte, low byte, etc.). | |
| 175 [..] The entire life data is calculated in CPU2. Like tissues, CNS,... | |
| 176 Therefore the main unit is _not_ necessarily a Real Time system. | |
| 177 Simulation on the main unit can be executed without disrupting life data. | |
| 178 [..] SPI is triggered and timed by calling DataEX_call() in data_exchange_main.c | |
| 179 DataEX_copy_to_LifeData() does the transfer from buffer to variables used. | |
| 180 | |
| 181 ============================================================================== | |
| 182 ##### Menu, MenuEdit, Info ##### | |
| 183 ============================================================================== | |
| 184 [..] tMenu.c, tMenuEdit.c and tInfo.c is the system used. | |
| 185 logbook is part of Info not Menu. | |
| 186 The Info Menu is accessed by button 'Back' | |
| 187 The regular Menu is accessed by button 'Enter' | |
| 188 [..] Menu content is kept in frame memory for fast access. | |
| 189 There is no need to build pages if the 'Enter' button is pressed. | |
| 190 This is in contrast to MenuEdit pages. | |
| 191 [..] Button control for new pages (and pages in general) have to implemented | |
| 192 in tMenu.c, tMenuEdit.c or tInfo.c | |
| 193 | |
| 194 [..] ToDo (Oct. 14) Timeout for menus via Timer3 / IRQ 2 | |
| 195 | |
| 196 ============================================================================== | |
| 197 ##### specials ##### | |
| 198 ============================================================================== | |
| 199 [..] There was code for vector graphics from great demos | |
| 200 (peridiummmm and jupiter) that can be fitted again | |
| 201 | |
| 202 @endverbatim | |
| 203 ****************************************************************************** | |
| 204 */ | |
| 205 | |
| 206 /* Includes ------------------------------------------------------------------*/ | |
| 207 #include "base_bootloader.h" | |
| 208 | |
| 209 // From Bootloader/Inc: | |
| 210 #include "tInfoBootloader.h" | |
| 211 | |
| 212 // ? | |
| 213 #include "externLogbookFlash.h" | |
| 214 #include "firmwareEraseProgram.h" | |
| 215 #include "firmwareJumpToApplication.h" | |
| 216 | |
| 217 // From Common/Inc: | |
| 218 #include "FirmwareData.h" | |
| 219 | |
| 220 // From Common/Drivers: | |
| 221 #include "stm32f4xx_hal.h" | |
| 222 #include "stm32f4xx_hal_rcc.h" | |
| 223 #include "stm32f4xx_hal_flash_ex.h" | |
| 224 #include "stm32f4xx_hal_wwdg.h" | |
| 225 | |
| 869 | 226 #ifdef BOOTLOADER_STANDALONE |
| 227 #include "Fonts/Font_T144_plus.h" | |
| 228 #include "Fonts/Font_T84.h" | |
| 229 #include "Fonts/Font_T105.h" | |
| 230 #include "Fonts/Font_T54.h" | |
| 231 #include "Fonts/Font_T48_plus.h" | |
| 232 #include "Fonts/Font_T24.h" | |
| 233 #include "Fonts/Font_T42.h" | |
| 234 #include "Fonts/image_battery.h" | |
| 235 #include "Fonts/image_heinrichs_weikamp.h" | |
| 236 #include "Fonts/image_ostc.h" | |
| 237 #endif | |
| 238 | |
| 30 | 239 // From Discovery/Inc (shall be shared...) |
| 240 #include "data_exchange_main.h" | |
| 241 #include "display.h" | |
| 242 #include "gfx_engine.h" | |
| 243 #include "ostc.h" | |
| 244 #include "tComm.h" | |
| 245 #include "tStructure.h" | |
| 246 | |
| 247 // From AC6 support: | |
| 248 #include <stdio.h> | |
| 249 #include <string.h> // for memcopy | |
| 250 | |
| 251 /* Private define ------------------------------------------------------------*/ | |
| 252 #define BUFFER_SIZE ((uint32_t)0x00177000) | |
| 253 #define WRITE_READ_ADDR ((uint32_t)0x0000) | |
| 254 #define REFRESH_COUNT ((uint32_t)0x0569) /* SDRAM refresh counter (90Mhz SD clock) */ | |
| 255 | |
| 256 /* Private macro -------------------------------------------------------------*/ | |
| 257 /* Private variables ---------------------------------------------------------*/ | |
| 258 uint8_t returnFromCommCleanUpRequest = 0; | |
| 259 | |
| 260 const SFirmwareData bootloader_FirmwareData __attribute__(( section(".bootloader_firmware_data") )) = | |
| 261 { | |
| 262 .versionFirst = 1, | |
| 263 .versionSecond = 0, | |
| 264 .versionThird = 1, | |
| 265 .versionBeta = 1, | |
| 266 | |
| 267 /* 4 bytes with trailing 0 */ | |
| 268 .signature = "cw", | |
| 269 | |
| 270 .release_year = 16, | |
| 271 .release_month = 4, | |
| 272 .release_day = 8, | |
| 273 .release_sub = 0, | |
| 274 | |
| 275 /* max 48 with trailing 0 */ | |
| 276 .release_info ="tComm with all", | |
| 277 | |
| 278 /* for safety reasons and coming functions*/ | |
| 279 .magic[0] = FIRMWARE_MAGIC_FIRST, | |
| 280 .magic[1] = FIRMWARE_MAGIC_SECOND, | |
| 281 .magic[2] = FIRMWARE_MAGIC_FIRMWARE, /* the magic byte */ | |
| 282 .magic[3] = FIRMWARE_MAGIC_END | |
| 283 }; | |
| 284 | |
| 869 | 285 #if 0 |
| 30 | 286 const SHardwareData HardwareData __attribute__((at(HARDWAREDATA_ADDRESS))) = { |
| 287 | |
| 288 // first 52 bytes | |
| 289 .primarySerial = 0xFFFF, | |
| 290 .primaryLicence = 0xFF, | |
| 291 .revision8bit = 0xFF, | |
| 292 .production_year = 0xFF, | |
| 293 .production_month = 0xFF, | |
| 294 .production_day = 0xFF, | |
| 295 .production_bluetooth_name_set = 0xFF, | |
| 296 | |
| 297 .production_info = { | |
| 298 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, | |
| 299 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, | |
| 300 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, | |
| 301 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}, | |
| 302 | |
| 303 // other 12 bytes (64 in total) | |
| 304 .secondarySerial = 0xFFFF, | |
| 305 .secondaryLicence = 0xFF, | |
| 306 .secondaryReason8bit = 0xFF, | |
| 307 .secondary_year = 0xFF, | |
| 308 .secondary_month = 0xFF, | |
| 309 .secondary_day = 0xFF, | |
| 310 .secondary_bluetooth_name_set = 0xFF, | |
| 311 .secondary_info = {0xFF,0xFF,0xFF,0xFF} | |
| 312 }; | |
| 869 | 313 #endif |
| 30 | 314 |
| 315 RTC_HandleTypeDef RtcHandle; | |
| 316 TIM_HandleTypeDef TimHandle; /* used in stm32f4xx_it.c too */ | |
| 317 TIM_HandleTypeDef TimBacklightHandle; /* used in stm32f4xx_it.c too */ | |
| 318 | |
| 319 uint32_t time_before; | |
| 320 uint32_t time_between; | |
| 321 uint32_t time_after; | |
| 322 | |
| 323 /* SDRAM handler declaration */ | |
| 324 SDRAM_HandleTypeDef hsdram; | |
| 325 FMC_SDRAM_TimingTypeDef SDRAM_Timing; | |
| 326 FMC_SDRAM_CommandTypeDef command; | |
| 327 | |
| 328 FLASH_OBProgramInitTypeDef OBInit; | |
| 329 FLASH_AdvOBProgramInitTypeDef AdvOBInit; | |
| 330 | |
| 331 | |
| 332 /* Private variables with external access ------------------------------------*/ | |
| 333 | |
| 334 uint32_t globalStateID = 0; | |
| 335 uint8_t globalModeID = SURFMODE; | |
| 336 uint32_t time_without_button_pressed_deciseconds = 0; | |
| 337 uint8_t bootToBootloader = 0; | |
| 338 | |
| 339 /* Private function prototypes -----------------------------------------------*/ | |
| 340 | |
| 341 //static void LCD_ToggleFramebuffer(GFX_DrawCfgTypeDef *hconfig); | |
| 342 //static void LCD_Config(GFX_DrawCfgTypeDef *hconfig); | |
| 343 static void SystemClock_Config(void); | |
| 344 static void Error_Handler(void); | |
| 345 | |
| 346 static void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command); | |
| 347 static void SDRAM_Config(void); | |
| 348 //static void DualBoot(void); | |
| 349 static void EXTILine_Buttons_Config(void); | |
| 350 //static void RTC_init(void); | |
| 351 static void TIM_init(void); | |
| 352 static void TIM_BACKLIGHT_init(void); | |
| 353 //static void TIM_BACKLIGHT_adjust(void); | |
| 354 static void gotoSleep(void); | |
| 355 uint8_t checkResetForFirmwareUpdate(void); | |
| 356 void DeleteResetToFirmwareUpdateRegister(void); | |
| 357 void reset_to_firmware_using_Watchdog(void); | |
| 358 void reset_to_update_using_system_reset(void); | |
| 359 | |
| 360 //static void DualBootToBootloader(void); | |
| 361 | |
| 362 /* ITM Trace-------- ---------------------------------------------------------*/ | |
| 363 /* | |
| 364 #define ITM_Port8(n) (*((volatile unsigned char *)(0xE0000000+4*n))) | |
| 365 #define ITM_Port16(n) (*((volatile unsigned short*)(0xE0000000+4*n))) | |
| 366 #define ITM_Port32(n) (*((volatile unsigned long *)(0xE0000000+4*n))) | |
| 367 | |
| 368 #define DEMCR (*((volatile unsigned long *)(0xE000EDFC))) | |
| 369 #define TRCENA 0x01000000 | |
| 370 | |
| 371 struct __FILE { int handle; }; | |
| 372 FILE __stdout; | |
| 373 FILE __stdin; | |
| 374 | |
| 375 int fputc(int ch, FILE *f) { | |
| 376 if (DEMCR & TRCENA) { | |
| 377 while (ITM_Port32(0) == 0); | |
| 378 ITM_Port8(0) = ch; | |
| 379 } | |
| 380 return(ch); | |
| 381 } | |
| 382 */ | |
| 383 | |
| 384 /* Private functions ---------------------------------------------------------*/ | |
| 385 | |
| 386 /** | |
| 387 * @brief Main program | |
| 388 * @param None | |
| 389 * @retval None | |
| 390 */ | |
| 391 | |
| 392 void GPIO_test_I2C_lines(void) | |
| 393 { | |
| 394 GPIO_InitTypeDef GPIO_InitStructure; | |
| 395 __GPIOA_CLK_ENABLE(); | |
| 396 __GPIOG_CLK_ENABLE(); | |
| 397 GPIO_InitStructure.Pin = GPIO_PIN_7; | |
| 398 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 399 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 400 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 401 HAL_GPIO_Init(GPIOG, &GPIO_InitStructure); | |
| 402 GPIO_InitStructure.Pin = GPIO_PIN_3; | |
| 403 HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); | |
| 404 | |
| 405 while(1) | |
| 406 { | |
| 407 HAL_GPIO_WritePin(GPIOG,GPIO_PIN_7,GPIO_PIN_SET); | |
| 408 HAL_GPIO_WritePin(GPIOA,GPIO_PIN_3,GPIO_PIN_RESET); | |
| 409 HAL_Delay(10); | |
| 410 HAL_GPIO_WritePin(GPIOG,GPIO_PIN_7,GPIO_PIN_RESET); | |
| 411 HAL_GPIO_WritePin(GPIOA,GPIO_PIN_3,GPIO_PIN_SET); | |
| 412 HAL_Delay(10); | |
| 413 } | |
| 414 } | |
| 415 | |
| 416 | |
| 417 int main(void) | |
| 418 { | |
| 419 | |
| 420 /* | |
| 421 HAL_Init(); | |
| 422 SystemClock_Config(); | |
| 423 GPIO_test_I2C_lines(); | |
| 424 */ | |
| 425 uint32_t pLayerInvisible; | |
| 426 uint32_t firmware_load_result; | |
| 427 uint8_t magicbyte = 0; | |
| 428 uint8_t callForUpdate; | |
| 429 uint8_t status = 0; | |
| 430 char textVersion[32]; | |
| 431 uint8_t ptr; | |
| 432 uint32_t pOffset; | |
| 433 | |
| 869 | 434 const SHardwareData* HardwareData = hardwareDataGetPointer(); |
| 435 | |
| 30 | 436 set_globalState(StBoot0); |
| 437 | |
| 438 HAL_Init(); | |
| 439 HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_2); | |
| 869 | 440 SystemClock_Config(); |
| 441 | |
| 442 MX_GPIO_Init(); | |
| 30 | 443 |
| 444 /* feedback for the user | |
| 445 * aber sehr unsch�n beim Warmstart | |
| 446 * da das letzte Bild noch lange nachleuchtet */ | |
| 447 // MX_GPIO_Backlight_max_static_only_Init(); | |
| 448 | |
| 449 | |
| 450 /* button press is only 40 to 50 us low */ | |
| 451 MX_GPIO_One_Button_only_Init(); | |
| 452 | |
| 453 uint32_t i = 500000; | |
| 454 | |
| 455 callForUpdate = __HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST); | |
| 456 | |
| 457 if(callForUpdate) | |
| 458 { | |
| 459 i = 0; | |
| 460 } | |
| 461 else | |
| 462 if( (firmware_MainCodeIsProgammed() == 0) | |
| 869 | 463 || (HardwareData->primarySerial == 0xFFFF) |
| 464 || (HardwareData->production_bluetooth_name_set == 0xFF)) | |
| 30 | 465 { |
| 466 i = 1; | |
| 467 } | |
| 468 else | |
| 469 { | |
| 470 while(MX_GPIO_Read_The_One_Button() && i) | |
| 471 { | |
| 472 i--; | |
| 473 __NOP(); | |
| 474 } | |
| 475 if(i) | |
| 476 { | |
| 477 i = 200000; | |
| 478 while(!MX_GPIO_Read_The_One_Button() && i) | |
| 479 { | |
| 480 i--; | |
| 481 __NOP(); | |
| 482 } | |
| 483 if(i) | |
| 484 { | |
| 485 i = 200000; | |
| 486 while(MX_GPIO_Read_The_One_Button() && i) | |
| 487 { | |
| 488 i--; | |
| 489 __NOP(); | |
| 490 } | |
| 491 if(i) | |
| 492 { | |
| 493 i = 200000; | |
| 494 while(!MX_GPIO_Read_The_One_Button() && i) | |
| 495 { | |
| 496 i--; | |
| 497 __NOP(); | |
| 498 } | |
| 499 if(i) | |
| 500 { | |
| 501 i = 200000; | |
| 502 while(MX_GPIO_Read_The_One_Button() && i) | |
| 503 { | |
| 504 i--; | |
| 505 __NOP(); | |
| 506 } | |
| 507 } | |
| 508 } | |
| 509 } | |
| 510 } | |
| 511 } | |
| 512 | |
| 513 if((i == 0) && (callForUpdate == 0)) | |
| 514 firmware_JumpTo_Application(); | |
| 515 | |
| 516 MX_SPI_Init(); | |
| 517 SDRAM_Config(); | |
| 518 HAL_Delay(100); | |
| 519 | |
| 520 GFX_init1_no_DMA(&pLayerInvisible, 2); | |
| 521 | |
| 522 TIM_BACKLIGHT_init(); | |
| 523 | |
| 524 // ----------------------------- | |
| 525 | |
| 526 display_power_on__1_of_2__pre_RGB(); | |
| 527 GFX_LTDC_Init(); | |
| 528 GFX_LTDC_LayerDefaultInit(TOP_LAYER, pLayerInvisible); | |
| 529 GFX_LTDC_LayerDefaultInit(BACKGRD_LAYER, pLayerInvisible); | |
| 530 GFX_SetFramesTopBottom(pLayerInvisible,pLayerInvisible,480); | |
| 531 HAL_Delay(20); | |
| 532 display_power_on__2_of_2__post_RGB(); | |
| 533 | |
| 534 // ----------------------------- | |
| 535 GFX_change_LTDC(); | |
| 536 GFX_hwBackgroundOn(); | |
| 537 GFX_change_LTDC(); | |
| 538 // ----------------------------- | |
| 539 tInfoBootloader_init(); | |
| 540 // ----------------------------- | |
| 541 if(i == 0) | |
| 542 { | |
| 543 tInfo_newpage("load firmware data"); | |
| 544 uint8_t* pBuffer = (uint8_t*)((uint32_t)0xD0000000); /* blocked via GFX_init1_no_DMA */ | |
| 545 firmware_load_result = ext_flash_read_firmware(pBuffer,768000, &magicbyte); | |
| 546 | |
| 547 if((firmware_load_result > 0) && (firmware_load_result < 768000) && (magicbyte == 0xEE)) | |
| 548 { | |
| 549 ptr = ext_flash_read_firmware_version(textVersion); | |
| 550 textVersion[ptr++] = 'f'; | |
| 551 textVersion[ptr++] = 'o'; | |
| 552 textVersion[ptr++] = 'u'; | |
| 553 textVersion[ptr++] = 'n'; | |
| 554 textVersion[ptr++] = 'd'; | |
| 555 textVersion[ptr] = 0; | |
| 556 | |
| 557 tInfo_newpage(textVersion); | |
| 558 tInfo_write("erase flash"); | |
| 559 status = firmware_eraseFlashMemory(); | |
| 560 if(status != HAL_OK) | |
| 561 { | |
| 562 tInfo_newpage("error. try again."); | |
| 563 status = firmware_eraseFlashMemory(); | |
| 564 if(status != HAL_OK) | |
| 565 { | |
| 566 tInfo_newpage("error. skip update."); | |
| 567 HAL_Delay(1000); | |
| 568 } | |
| 569 } | |
| 570 if(status == HAL_OK) | |
| 571 { | |
| 252 | 572 tInfo_write("program flash"); |
| 30 | 573 status = firmware_programFlashMemory(pBuffer,firmware_load_result); |
| 574 if(status != HAL_OK) | |
| 575 { | |
| 576 tInfo_newpage("error. try again."); | |
| 577 status = firmware_programFlashMemory(pBuffer,firmware_load_result); | |
| 578 if(status != HAL_OK) | |
| 579 { | |
| 580 tInfo_newpage("error. skip update."); | |
| 581 HAL_Delay(1000); | |
| 582 } | |
| 583 } | |
| 584 } | |
| 585 } | |
| 586 } | |
| 587 | |
| 588 /* here comes the variable upper firmware loader */ | |
| 589 if((i == 0) && (status == HAL_OK)) | |
| 590 { | |
| 591 tInfo_newpage("load firmware2 data"); | |
| 592 uint8_t* pBuffer = (uint8_t*)((uint32_t)0xD0000000); /* blocked via GFX_init1_no_DMA */ | |
| 593 firmware_load_result = ext_flash_read_firmware2(&pOffset, pBuffer,768000*2,0,0); | |
| 594 | |
| 595 if((firmware_load_result > 0) && (firmware_load_result + pOffset <= 1024000)) | |
| 596 { | |
| 597 ptr = 0; | |
| 598 ptr += gfx_number_to_string(7,0,&textVersion[ptr],firmware_load_result); | |
| 599 textVersion[ptr++] = ' '; | |
| 600 textVersion[ptr++] = 'b'; | |
| 601 textVersion[ptr++] = 'y'; | |
| 602 textVersion[ptr++] = 't'; | |
| 603 textVersion[ptr++] = 'e'; | |
| 604 textVersion[ptr++] = 's'; | |
| 605 textVersion[ptr++] = ' '; | |
| 606 textVersion[ptr++] = 'w'; | |
| 607 textVersion[ptr++] = 'i'; | |
| 608 textVersion[ptr++] = 't'; | |
| 609 textVersion[ptr++] = 'h'; | |
| 610 textVersion[ptr++] = ' '; | |
| 611 ptr += gfx_number_to_string(7,0,&textVersion[ptr],pOffset); | |
| 612 textVersion[ptr++] = ' '; | |
| 613 textVersion[ptr++] = 'o'; | |
| 614 textVersion[ptr++] = 'f'; | |
| 615 textVersion[ptr++] = 'f'; | |
| 616 textVersion[ptr++] = 's'; | |
| 617 textVersion[ptr++] = 'e'; | |
| 618 textVersion[ptr++] = 't'; | |
| 619 textVersion[ptr] = 0; | |
| 620 tInfo_newpage(textVersion); | |
| 621 | |
| 622 ptr = 0; | |
| 623 textVersion[ptr++] = 'f'; | |
| 624 textVersion[ptr++] = 'o'; | |
| 625 textVersion[ptr++] = 'u'; | |
| 626 textVersion[ptr++] = 'n'; | |
| 627 textVersion[ptr++] = 'd'; | |
| 628 textVersion[ptr] = 0; | |
| 629 | |
| 630 tInfo_write(textVersion); | |
| 631 tInfo_write("erase flash"); | |
| 632 status = firmware2_variable_upperpart_eraseFlashMemory(firmware_load_result,pOffset); | |
| 633 if(status != HAL_OK) | |
| 634 { | |
| 635 tInfo_newpage("error. try again."); | |
| 636 status = firmware2_variable_upperpart_eraseFlashMemory(firmware_load_result,pOffset); | |
| 637 if(status != HAL_OK) | |
| 638 { | |
| 639 tInfo_newpage("error. skip update."); | |
| 640 HAL_Delay(1000); | |
| 641 } | |
| 642 } | |
| 643 if(status == HAL_OK) | |
| 644 { | |
| 252 | 645 tInfo_write("program flash"); |
| 30 | 646 status = firmware2_variable_upperpart_programFlashMemory(firmware_load_result,pOffset,pBuffer,firmware_load_result,0); |
| 647 if(status != HAL_OK) | |
| 648 { | |
| 649 tInfo_newpage("error. try again."); | |
| 650 status = firmware2_variable_upperpart_programFlashMemory(firmware_load_result,pOffset,pBuffer,firmware_load_result,0); | |
| 651 if(status != HAL_OK) | |
| 652 { | |
| 653 tInfo_newpage("error. skip update."); | |
| 654 HAL_Delay(1000); | |
| 655 } | |
| 656 } | |
| 657 } | |
| 658 } | |
| 659 } | |
| 660 | |
| 661 if((i == 0) && (status == HAL_OK)) | |
| 662 { | |
| 663 tInfo_newpage("Done."); | |
| 664 tInfo_write("Cleaning."); | |
| 665 ext_flash_erase_firmware_if_not_empty(); | |
| 666 ext_flash_erase_firmware2_if_not_empty(); | |
| 667 tInfo_write("Reset device."); | |
| 668 reset_to_firmware_using_Watchdog(); | |
| 669 } | |
| 670 | |
| 671 ptr = 0; | |
| 880 | 672 textVersion[ptr++] = '\020'; |
| 30 | 673 textVersion[ptr++] = 's'; |
| 674 textVersion[ptr++] = 'e'; | |
| 675 textVersion[ptr++] = 'r'; | |
| 676 textVersion[ptr++] = 'i'; | |
| 677 textVersion[ptr++] = 'a'; | |
| 678 textVersion[ptr++] = 'l'; | |
| 679 textVersion[ptr++] = ' '; | |
| 869 | 680 if(HardwareData->primarySerial == 0xFFFF) |
| 30 | 681 { |
| 682 textVersion[ptr++] = 'n'; | |
| 683 textVersion[ptr++] = 'o'; | |
| 684 textVersion[ptr++] = 't'; | |
| 685 textVersion[ptr++] = ' '; | |
| 686 textVersion[ptr++] = 's'; | |
| 687 textVersion[ptr++] = 'e'; | |
| 688 textVersion[ptr++] = 't'; | |
| 689 } | |
| 869 | 690 else if(HardwareData->secondarySerial == 0xFFFF) |
| 30 | 691 { |
| 692 textVersion[ptr++] = '#'; | |
| 869 | 693 ptr += gfx_number_to_string(5,1,&textVersion[ptr],HardwareData->primarySerial); |
| 30 | 694 } |
| 695 else | |
| 696 { | |
| 697 textVersion[ptr++] = '#'; | |
| 869 | 698 ptr += gfx_number_to_string(5,1,&textVersion[ptr],HardwareData->secondarySerial); |
| 30 | 699 textVersion[ptr++] = ' '; |
| 700 textVersion[ptr++] = '('; | |
| 869 | 701 ptr += gfx_number_to_string(5,1,&textVersion[ptr],HardwareData->primarySerial); |
| 30 | 702 textVersion[ptr++] = ')'; |
| 703 } | |
| 704 textVersion[ptr++] = '\020'; | |
| 705 textVersion[ptr] = 0; | |
| 706 | |
|
872
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
707 TIM_init(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
708 MX_UART_Init(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
709 MX_Bluetooth_PowerOn(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
710 tComm_init(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
711 |
| 30 | 712 tInfo_button_text("Exit","","Sleep"); |
| 869 | 713 tInfo_newpage("Bootloader 240812"); |
| 30 | 714 tInfo_write("start bluetooth"); |
| 715 tInfo_write(""); | |
| 716 tInfo_write(textVersion); | |
|
872
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
717 if(tComm_Set_Bluetooth_Name(0) == 0xFF) |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
718 { |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
719 tInfo_write("Init bluetooth"); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
720 tComm_StartBlueModBaseInit(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
721 } |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
722 else |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
723 { |
| 880 | 724 tInfo_write("Bluetooth set"); |
|
872
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
725 tComm_StartBlueModConfig(); |
|
5e027b0f7475
Added first time initialization for new bluetooth module:
Ideenmodellierer
parents:
869
diff
changeset
|
726 } |
| 30 | 727 |
| 728 set_globalState_Base(); | |
| 729 | |
| 730 GFX_start_VSYNC_IRQ(); | |
| 731 | |
| 732 EXTILine_Buttons_Config(); | |
| 733 /* | |
| 734 uint8_t* pBuffer1 = (uint8_t*)getFrame(20); | |
| 735 firmware_load_result = ext_flash_read_firmware(pBuffer1,768000); | |
| 736 | |
| 737 if((firmware_load_result > 0) && (firmware_load_result < 768000)) | |
| 738 { | |
| 739 firmware_eraseFlashMemory(); | |
| 740 firmware_programFlashMemory(pBuffer1,firmware_load_result); | |
| 741 // not for testing | |
| 742 //ext_flash_erase_firmware_if_not_empty(); | |
| 743 reset_to_firmware_using_Watchdog(); | |
| 744 } | |
| 745 */ | |
| 746 while(1) | |
| 747 { | |
| 748 // if(bootToBootloader) | |
| 749 // DualBootToBootloader(); | |
| 750 | |
| 751 if(bootToBootloader) | |
| 752 reset_to_update_using_system_reset(); | |
| 753 | |
| 754 tComm_control(); // will stop while loop if tComm Mode started until exit from UART | |
| 755 }; | |
| 756 } | |
| 757 | |
| 758 | |
| 759 void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) | |
| 760 { | |
| 761 | |
| 762 SStateList status; | |
| 763 | |
| 764 get_globalStateList(&status); | |
| 765 | |
| 766 switch(status.base) | |
| 767 { | |
| 768 default: | |
| 769 // TIM_BACKLIGHT_adjust(); | |
| 770 break; | |
| 771 } | |
| 772 | |
| 773 if(returnFromCommCleanUpRequest) | |
| 774 { | |
| 775 tComm_exit(); | |
| 776 returnFromCommCleanUpRequest = 0; | |
| 777 GFX_hwBackgroundOn(); | |
| 778 tInfo_button_text("Exit","","Sleep"); | |
| 779 tInfo_newpage("bluetooth disonnected"); | |
| 780 tInfo_write(""); | |
| 781 tInfo_write(""); | |
| 782 tInfo_write(""); | |
| 783 tInfo_write(""); | |
| 784 } | |
| 785 | |
| 786 get_globalStateList(&status); | |
| 787 | |
| 788 switch(status.base) | |
| 789 { | |
| 790 case BaseComm: | |
| 791 if(get_globalState() == StUART_STANDARD) | |
| 792 tComm_refresh(); | |
| 793 break; | |
| 794 default: | |
| 795 break; | |
| 796 } | |
| 797 } | |
| 798 | |
| 799 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) | |
| 800 { | |
| 801 uint8_t action; | |
| 802 SStateList status; | |
| 803 static uint8_t counterToPreventSleep = 0; | |
| 804 if(GPIO_Pin == VSYNC_IRQ_PIN) // rechts, unten | |
| 805 { | |
| 806 GFX_change_LTDC(); | |
| 807 housekeepingFrame(); | |
| 808 if(counterToPreventSleep < 250) | |
| 809 counterToPreventSleep++; | |
| 810 else | |
| 811 if(counterToPreventSleep != 255) | |
| 812 { | |
| 813 counterToPreventSleep = 255; | |
| 814 } | |
| 815 | |
| 816 return; | |
| 817 } | |
| 818 | |
| 819 time_without_button_pressed_deciseconds = 0; | |
| 820 | |
| 821 if(GFX_logoStatus() != 0) | |
| 822 return; | |
| 823 | |
| 824 if(GPIO_Pin == BUTTON_BACK_PIN) // links | |
| 825 action = ACTION_BUTTON_BACK; | |
| 826 else | |
| 827 if(GPIO_Pin == BUTTON_ENTER_PIN) // mitte | |
| 828 action = ACTION_BUTTON_ENTER; | |
| 829 else | |
| 830 if(GPIO_Pin == BUTTON_NEXT_PIN) // rechts | |
| 831 action = ACTION_BUTTON_NEXT; | |
| 832 #ifdef BUTTON_CUSTOM_PIN | |
| 833 else | |
| 834 if(GPIO_Pin == BUTTON_CUSTOM_PIN) // extra | |
| 835 action = ACTION_BUTTON_CUSTOM; | |
| 836 #endif | |
| 837 else | |
| 838 action = 0; | |
| 839 get_globalStateList(&status); | |
| 840 | |
| 841 switch(status.base) | |
| 842 { | |
| 843 case BaseComm: | |
| 844 if(action == ACTION_BUTTON_BACK) | |
| 845 { | |
| 846 reset_to_firmware_using_Watchdog(); | |
| 847 } | |
| 848 break; | |
| 849 | |
| 850 default: | |
| 851 if((action == ACTION_BUTTON_NEXT) && (counterToPreventSleep == 255) && (get_globalState() == StS)) | |
| 852 { | |
| 853 while(1) | |
| 854 { | |
| 855 MX_tell_reset_logik_alles_ok(); | |
| 856 DataEX_call(); | |
| 857 HAL_Delay(100); | |
| 858 } | |
| 859 } | |
| 860 else | |
| 861 if(action == ACTION_BUTTON_BACK) | |
| 862 { | |
| 863 reset_to_firmware_using_Watchdog(); | |
| 864 } | |
| 865 else | |
| 866 if(action == ACTION_BUTTON_CUSTOM) | |
| 867 { | |
| 868 if(get_globalState() == StS) | |
| 869 gotoSleep(); | |
| 870 } | |
| 871 else | |
| 872 if(action == ACTION_BUTTON_ENTER) | |
| 873 { | |
| 874 reset_to_update_using_system_reset(); | |
| 875 } | |
| 876 break; | |
| 877 } | |
| 878 } | |
| 879 | |
| 880 | |
| 881 void gotoSleep(void) | |
| 882 { | |
| 883 ext_flash_erase_firmware_if_not_empty(); | |
| 884 set_globalState(StStop); | |
| 885 } | |
| 886 | |
| 887 // ----------------------------- | |
| 888 | |
| 889 | |
| 890 void MainBootLoaderInit(void) | |
| 891 { | |
| 892 void (*SysMemBootJump)(void); | |
| 893 SysMemBootJump=(void (*)(void)) (*((uint32_t *) 0x1fff0004)); | |
| 894 | |
| 895 // DMA, SPI, UART, TIM, ExtIRQ, graphics DMA, LTDC | |
| 896 | |
| 897 HAL_RCC_DeInit(); | |
| 898 SysTick->CTRL = 0; | |
| 899 SysTick->LOAD = 0; | |
| 900 SysTick->VAL = 0; | |
| 901 | |
| 902 __set_PRIMASK(1); | |
| 903 | |
| 904 __set_MSP(0x20002318); | |
| 905 SysMemBootJump(); | |
| 906 } | |
| 907 | |
| 908 uint32_t get_globalState(void) | |
| 909 { | |
| 910 return globalStateID; | |
| 911 } | |
| 912 | |
| 913 void get_globalStateList(SStateList *output) | |
| 914 { | |
| 915 output->base = (uint8_t)((globalStateID >> 28) & 0x0F); | |
| 916 output->page = (uint8_t)((globalStateID >> 24) & 0x0F); | |
| 917 output->line = (uint8_t)((globalStateID >> 16) & 0xFF); | |
| 918 output->field = (uint8_t)((globalStateID >> 8) & 0xFF); | |
| 919 output->mode = (uint8_t)((globalStateID ) & 0xFF); | |
| 920 } | |
| 921 | |
| 922 void get_idSpecificStateList(uint32_t id, SStateList *output) | |
| 923 { | |
| 924 output->base = (uint8_t)((id >> 28) & 0x0F); | |
| 925 output->page = (uint8_t)((id >> 24) & 0x0F); | |
| 926 output->line = (uint8_t)((id >> 16) & 0xFF); | |
| 927 output->field = (uint8_t)((id >> 8) & 0xFF); | |
| 928 output->mode = (uint8_t)((id ) & 0xFF); | |
| 929 } | |
| 930 | |
| 931 void set_globalState_Base(void) | |
| 932 { | |
| 933 set_globalState(StS); | |
| 934 } | |
| 935 | |
| 936 void set_globalState_Menu_Page(uint8_t page) | |
| 937 { | |
| 938 globalStateID = ((BaseMenu << 28) + (page << 24)); | |
| 939 } | |
| 940 | |
| 941 void set_globalState_Log_Page(uint8_t pageIsLine) | |
| 942 { | |
| 943 globalStateID = StILOGLIST + (pageIsLine << 16); | |
| 944 } | |
| 945 | |
| 946 | |
| 947 void set_globalState_Menu_Line(uint8_t line) | |
| 948 { | |
| 949 globalStateID = ((globalStateID & MaskLineFieldDigit) + (line << 16)); | |
| 950 } | |
| 951 | |
| 952 | |
| 953 void set_globalState(uint32_t newID) | |
| 954 { | |
| 955 globalStateID = newID; | |
| 956 } | |
| 957 | |
| 958 | |
| 959 | |
| 960 void delayMicros(uint32_t micros) | |
| 961 { | |
| 962 micros = micros * (168/4) - 10; | |
| 963 while(micros--); | |
| 964 } | |
| 965 | |
| 966 | |
| 967 void get_RTC_DateTime(RTC_DateTypeDef * sdatestructureget, RTC_TimeTypeDef * stimestructureget) | |
| 968 { | |
| 969 /* Get the RTC current Time */ | |
| 970 if(sdatestructureget) | |
| 971 HAL_RTC_GetTime(&RtcHandle, stimestructureget, FORMAT_BIN); | |
| 972 /* Get the RTC current Date */ | |
| 973 if(stimestructureget) | |
| 974 HAL_RTC_GetDate(&RtcHandle, sdatestructureget, FORMAT_BIN); | |
| 975 } | |
| 976 | |
| 977 | |
| 978 void set_RTC_DateTime(RTC_DateTypeDef * sdatestructure, RTC_TimeTypeDef * stimestructure) | |
| 979 { | |
| 980 if(sdatestructure) | |
| 981 if(HAL_RTC_SetDate(&RtcHandle,sdatestructure,FORMAT_BCD) != HAL_OK) | |
| 982 { | |
| 983 /* Initialization Error */ | |
| 984 Error_Handler(); | |
| 985 } | |
| 986 | |
| 987 if(stimestructure) | |
| 988 if(HAL_RTC_SetTime(&RtcHandle,stimestructure,FORMAT_BCD) != HAL_OK) | |
| 989 { | |
| 990 /* Initialization Error */ | |
| 991 Error_Handler(); | |
| 992 } | |
| 993 } | |
| 994 | |
| 995 static void TIM_init(void) | |
| 996 { | |
| 997 uint16_t uwPrescalerValue = 0; | |
| 998 | |
| 999 uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 10000) - 1; | |
| 1000 | |
| 1001 /* Set TIMx instance */ | |
| 1002 TimHandle.Instance = TIMx; | |
| 1003 | |
| 1004 /* Initialize TIM3 peripheral as follows: | |
| 1005 + Period = 10000 - 1 | |
| 1006 + Prescaler = ((SystemCoreClock/2)/10000) - 1 | |
| 1007 + ClockDivision = 0 | |
| 1008 + Counter direction = Up | |
| 1009 */ | |
| 1010 TimHandle.Init.Period = 1000 - 1; | |
| 1011 TimHandle.Init.Prescaler = uwPrescalerValue; | |
| 1012 TimHandle.Init.ClockDivision = 0; | |
| 1013 TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; | |
| 1014 if(HAL_TIM_Base_Init(&TimHandle) != HAL_OK) | |
| 1015 { | |
| 1016 /* Initialization Error */ | |
| 1017 Error_Handler(); | |
| 1018 } | |
| 1019 | |
| 1020 /*##-2- Start the TIM Base generation in interrupt mode ####################*/ | |
| 1021 /* Start Channel1 */ | |
| 1022 if(HAL_TIM_Base_Start_IT(&TimHandle) != HAL_OK) | |
| 1023 { | |
| 1024 /* Starting Error */ | |
| 1025 Error_Handler(); | |
| 1026 } | |
| 1027 } | |
| 1028 | |
| 1029 #ifndef TIM_BACKLIGHT | |
| 1030 /* | |
| 1031 static void TIM_BACKLIGHT_adjust(void) | |
| 1032 { | |
| 1033 } | |
| 1034 */ | |
| 1035 static void TIM_BACKLIGHT_init(void) | |
| 1036 { | |
| 1037 } | |
| 1038 #else | |
| 1039 /* | |
| 1040 static void TIM_BACKLIGHT_adjust(void) | |
| 1041 { | |
| 1042 | |
| 1043 TIM_OC_InitTypeDef sConfig; | |
| 1044 sConfig.OCMode = TIM_OCMODE_PWM1; | |
| 1045 sConfig.OCPolarity = TIM_OCPOLARITY_HIGH; | |
| 1046 sConfig.OCFastMode = TIM_OCFAST_DISABLE; | |
| 1047 sConfig.Pulse = 600; | |
| 1048 | |
| 1049 HAL_TIM_PWM_ConfigChannel(&TimBacklightHandle, &sConfig, TIM_BACKLIGHT_CHANNEL); | |
| 1050 HAL_TIM_PWM_Start(&TimBacklightHandle, TIM_BACKLIGHT_CHANNEL); | |
| 1051 } | |
| 1052 */ | |
| 1053 static void TIM_BACKLIGHT_init(void) | |
| 1054 { | |
| 1055 uint32_t uwPrescalerValue = 0; | |
| 1056 TIM_OC_InitTypeDef sConfig; | |
| 1057 | |
| 1058 uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 18000000) - 1; | |
| 1059 | |
| 1060 TimBacklightHandle.Instance = TIM_BACKLIGHT; | |
| 1061 | |
| 1062 // Initialize TIM3 peripheral as follows: 30 kHz | |
| 1063 | |
| 1064 TimBacklightHandle.Init.Period = 600 - 1; | |
| 1065 TimBacklightHandle.Init.Prescaler = uwPrescalerValue; | |
| 1066 TimBacklightHandle.Init.ClockDivision = 0; | |
| 1067 TimBacklightHandle.Init.CounterMode = TIM_COUNTERMODE_UP; | |
| 1068 HAL_TIM_PWM_Init(&TimBacklightHandle); | |
| 1069 | |
| 1070 sConfig.OCMode = TIM_OCMODE_PWM1; | |
| 1071 sConfig.OCPolarity = TIM_OCPOLARITY_HIGH; | |
| 1072 sConfig.OCFastMode = TIM_OCFAST_DISABLE; | |
| 1073 sConfig.Pulse = 50 * 6; | |
| 1074 | |
| 1075 HAL_TIM_PWM_ConfigChannel(&TimBacklightHandle, &sConfig, TIM_BACKLIGHT_CHANNEL); | |
| 1076 HAL_TIM_PWM_Start(&TimBacklightHandle, TIM_BACKLIGHT_CHANNEL); | |
| 1077 } | |
| 1078 #endif | |
| 1079 | |
| 1080 /* Configure RTC prescaler and RTC data registers */ | |
| 1081 /* RTC configured as follow: | |
| 1082 - Hour Format = Format 24 | |
| 1083 - Asynch Prediv = Value according to source clock | |
| 1084 - Synch Prediv = Value according to source clock | |
| 1085 - OutPut = Output Disable | |
| 1086 - OutPutPolarity = High Polarity | |
| 1087 - OutPutType = Open Drain */ | |
| 1088 /*#define RTC_ASYNCH_PREDIV 0x7F LSE as RTC clock */ | |
| 1089 /*LSE: #define RTC_SYNCH_PREDIV 0x00FF LSE as RTC clock */ | |
| 1090 /*LSI: #define RTC_SYNCH_PREDIV 0x0130 LSI as RTC clock */ | |
| 1091 /* | |
| 1092 static void RTC_init(void) | |
| 1093 { | |
| 1094 RtcHandle.Instance = RTC; | |
| 1095 | |
| 1096 | |
| 1097 RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24; | |
| 1098 RtcHandle.Init.AsynchPrediv = 0x7F; | |
| 1099 RtcHandle.Init.SynchPrediv = 0x0130; | |
| 1100 RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE; | |
| 1101 RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; | |
| 1102 RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; | |
| 1103 | |
| 1104 if(HAL_RTC_Init(&RtcHandle) != HAL_OK) | |
| 1105 { | |
| 1106 Error_Handler(); | |
| 1107 } | |
| 1108 } | |
| 1109 */ | |
| 1110 | |
| 1111 static void EXTILine_Buttons_Config(void) | |
| 1112 { | |
| 1113 GPIO_InitTypeDef GPIO_InitStructure; | |
| 1114 | |
| 1115 BUTTON_ENTER_GPIO_ENABLE(); | |
| 1116 BUTTON_NEXT_GPIO_ENABLE(); | |
| 1117 BUTTON_BACK_GPIO_ENABLE(); | |
| 1118 | |
| 1119 /* Configure pin as weak PULLUP input */ | |
| 1120 /* buttons */ | |
| 1121 GPIO_InitStructure.Mode = GPIO_MODE_IT_RISING; | |
| 1122 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 1123 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 1124 | |
| 1125 GPIO_InitStructure.Pin = BUTTON_ENTER_PIN; | |
| 1126 HAL_GPIO_Init(BUTTON_ENTER_GPIO_PORT, &GPIO_InitStructure); | |
| 1127 | |
| 1128 GPIO_InitStructure.Pin = BUTTON_NEXT_PIN; | |
| 1129 HAL_GPIO_Init(BUTTON_NEXT_GPIO_PORT, &GPIO_InitStructure); | |
| 1130 | |
| 1131 GPIO_InitStructure.Pin = BUTTON_BACK_PIN; | |
| 1132 HAL_GPIO_Init(BUTTON_BACK_GPIO_PORT, &GPIO_InitStructure); | |
| 1133 | |
| 1134 /* Enable and set EXTI Line0 Interrupt to the lowest priority */ | |
| 1135 HAL_NVIC_SetPriority(BUTTON_ENTER_EXTI_IRQn, 2, 0); | |
| 1136 HAL_NVIC_SetPriority(BUTTON_NEXT_EXTI_IRQn, 2, 0); | |
| 1137 HAL_NVIC_SetPriority(BUTTON_BACK_EXTI_IRQn, 2, 0); | |
| 1138 HAL_NVIC_EnableIRQ(BUTTON_ENTER_EXTI_IRQn); | |
| 1139 HAL_NVIC_EnableIRQ(BUTTON_NEXT_EXTI_IRQn); | |
| 1140 HAL_NVIC_EnableIRQ(BUTTON_BACK_EXTI_IRQn); | |
| 1141 | |
| 1142 #ifdef BUTTON_CUSTOM_PIN | |
| 1143 BUTTON_CUSTOM_GPIO_ENABLE(); | |
| 1144 GPIO_InitStructure.Pin = BUTTON_CUSTOM_PIN; | |
| 1145 HAL_GPIO_Init(BUTTON_CUSTOM_GPIO_PORT, &GPIO_InitStructure); | |
| 1146 HAL_NVIC_SetPriority(BUTTON_CUSTOM_EXTI_IRQn, 2, 0); | |
| 1147 HAL_NVIC_EnableIRQ(BUTTON_CUSTOM_EXTI_IRQn); | |
| 1148 #endif | |
| 1149 } | |
| 1150 | |
| 1151 | |
| 1152 /** | |
| 1153 * @brief System Clock Configuration | |
| 1154 * The system Clock is configured as follow : | |
| 1155 * System Clock source = PLL (HSE) | |
| 1156 * SYSCLK(Hz) = 180000000 | |
| 1157 * HCLK(Hz) = 180000000 | |
| 1158 * AHB Prescaler = 1 | |
| 1159 * APB1 Prescaler = 4 | |
| 1160 * APB2 Prescaler = 2 | |
| 1161 * HSE Frequency(Hz) = 8000000 | |
| 1162 * PLL_M = 8 | |
| 1163 * PLL_N = 360 | |
| 1164 * PLL_P = 2 | |
| 1165 * PLL_Q = 7 | |
| 1166 * VDD(V) = 3.3 | |
| 1167 * Main regulator output voltage = Scale1 mode | |
| 1168 * Flash Latency(WS) = 5 | |
| 1169 * The LTDC Clock is configured as follow : | |
| 1170 * PLLSAIN = 192 | |
| 1171 * PLLSAIR = 4 | |
| 1172 * PLLSAIDivR = 8 | |
| 1173 * @param None | |
| 1174 * @retval None | |
| 1175 */ | |
| 1176 static void SystemClock_Config(void) | |
| 1177 { | |
| 869 | 1178 /* Enable Power Control clock */ |
| 1179 __PWR_CLK_ENABLE(); | |
| 30 | 1180 |
| 869 | 1181 /* The voltage scaling allows optimizing the power consumption when the device is |
| 1182 clocked below the maximum system frequency, to update the voltage scaling value | |
| 1183 regarding system frequency refer to product datasheet. */ | |
| 1184 __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE1 ); | |
| 30 | 1185 |
| 869 | 1186 /*##-1- System Clock Configuration #########################################*/ |
| 1187 /* Enable HighSpeed Oscillator and activate PLL with HSE/HSI as source */ | |
| 1188 RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; | |
| 1189 #ifdef DISC1_BOARD | |
| 1190 // Use High Speed Internal (HSI) oscillator, running at 16MHz. | |
| 1191 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
| 1192 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 1193 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
| 1194 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
| 1195 RCC_OscInitStruct.PLL.PLLM = 16; // HSI/16 is 1Mhz. | |
| 1196 #else | |
| 1197 // Use High Speed External oscillator, running at 8MHz | |
| 1198 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
| 1199 RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
| 1200 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; | |
| 1201 RCC_OscInitStruct.PLL.PLLM = 8; // HSE/8 is 1Mhz. | |
| 1202 #endif | |
| 1203 // System clock = PLL (1MHz) * N/p = 180 MHz. | |
| 1204 RCC_OscInitStruct.PLL.PLLN = 360; | |
| 1205 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; | |
| 1206 RCC_OscInitStruct.PLL.PLLQ = 7; | |
| 1207 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 1208 HAL_RCC_OscConfig( &RCC_OscInitStruct ); | |
| 30 | 1209 |
| 1210 // HAL_PWREx_ActivateOverDrive(); | |
| 869 | 1211 HAL_PWREx_DeactivateOverDrive(); |
| 1212 | |
| 1213 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ | |
| 1214 RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; | |
| 1215 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | |
| 1216 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; | |
| 1217 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 1218 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 1219 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; | |
| 1220 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; | |
| 1221 HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_8 ); //FLASH_LATENCY_5); | |
| 30 | 1222 |
| 869 | 1223 /*##-2- LTDC Clock Configuration ###########################################*/ |
| 1224 /* LCD clock configuration */ | |
| 1225 /* PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz */ | |
| 1226 /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz */ | |
| 1227 /* PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/4 = 48 Mhz */ | |
| 1228 /* LTDC clock frequency = PLLLCDCLK / RCC_PLLSAIDIVR_8 = 48/8 = 6 Mhz */ | |
| 30 | 1229 |
| 869 | 1230 /* neu: 8MHz/8*300/5/8 = 7,5 MHz = 19,5 Hz bei 800 x 480 */ |
| 1231 RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; | |
| 1232 PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC; | |
| 1233 PeriphClkInitStruct.PLLSAI.PLLSAIN = 300; //192; | |
| 1234 PeriphClkInitStruct.PLLSAI.PLLSAIR = 5; //4; | |
| 1235 PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;//RCC_PLLSAIDIVR_4;// RCC_PLLSAIDIVR_2; // RCC_PLLSAIDIVR_8 | |
| 1236 HAL_RCCEx_PeriphCLKConfig( &PeriphClkInitStruct ); | |
| 30 | 1237 } |
| 1238 | |
| 1239 | |
| 1240 /** | |
| 1241 * @brief This function is executed in case of error occurrence. | |
| 1242 * @param None | |
| 1243 * @retval None | |
| 1244 */ | |
| 1245 static void Error_Handler(void) | |
| 1246 { | |
| 1247 /* Turn LED3 on */ | |
| 1248 // BSP_LED_On(LED3); | |
| 1249 while(1) | |
| 1250 { | |
| 1251 } | |
| 1252 } | |
| 1253 | |
| 1254 /** | |
| 1255 * @brief Perform the SDRAM exernal memory inialization sequence | |
| 1256 * @param hsdram: SDRAM handle | |
| 1257 * @param Command: Pointer to SDRAM command structure | |
| 1258 * @retval None | |
| 1259 */ | |
| 1260 static void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command) | |
| 1261 { | |
| 1262 __IO uint32_t tmpmrd =0; | |
| 1263 /* Step 3: Configure a clock configuration enable command */ | |
| 1264 Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE; | |
| 1265 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
| 1266 Command->AutoRefreshNumber = 1; | |
| 1267 Command->ModeRegisterDefinition = 0; | |
| 1268 | |
| 1269 /* Send the command */ | |
| 1270 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
| 1271 | |
| 1272 /* Step 4: Insert 100 ms delay */ | |
| 1273 HAL_Delay(100); | |
| 1274 | |
| 1275 /* Step 5: Configure a PALL (precharge all) command */ | |
| 1276 Command->CommandMode = FMC_SDRAM_CMD_PALL; | |
| 1277 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
| 1278 Command->AutoRefreshNumber = 1; | |
| 1279 Command->ModeRegisterDefinition = 0; | |
| 1280 | |
| 1281 /* Send the command */ | |
| 1282 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
| 1283 | |
| 1284 /* Step 6 : Configure a Auto-Refresh command */ | |
| 1285 Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE; | |
| 1286 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
| 1287 Command->AutoRefreshNumber = 4; | |
| 1288 Command->ModeRegisterDefinition = 0; | |
| 1289 | |
| 1290 /* Send the command */ | |
| 1291 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
| 1292 | |
| 1293 /* Step 7: Program the external memory mode register */ | |
| 1294 tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 | | |
| 1295 SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL | | |
| 1296 SDRAM_MODEREG_CAS_LATENCY_3 | | |
| 1297 SDRAM_MODEREG_OPERATING_MODE_STANDARD | | |
| 1298 SDRAM_MODEREG_WRITEBURST_MODE_SINGLE; | |
| 1299 | |
| 1300 Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE; | |
| 1301 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
| 1302 Command->AutoRefreshNumber = 1; | |
| 1303 Command->ModeRegisterDefinition = tmpmrd; | |
| 1304 | |
| 1305 /* Send the command */ | |
| 1306 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
| 1307 | |
| 1308 /* Step 8: Set the refresh rate counter */ | |
| 1309 /* (15.62 us x Freq) - 20 */ | |
| 1310 /* neu: (8 us x Freq) - 20 */ | |
| 1311 /* Set the device refresh counter */ | |
| 1312 HAL_SDRAM_ProgramRefreshRate(hsdram, REFRESH_COUNT); | |
| 1313 } | |
| 1314 | |
| 1315 /* | |
| 1316 static void DualBoot(void) | |
| 1317 { | |
| 1318 // Set BFB2 bit to enable boot from Flash Bank2 | |
| 1319 // Allow Access to Flash control registers and user Falsh | |
| 1320 HAL_FLASH_Unlock(); | |
| 1321 | |
| 1322 // Allow Access to option bytes sector | |
| 1323 HAL_FLASH_OB_Unlock(); | |
| 1324 | |
| 1325 // Get the Dual boot configuration status | |
| 1326 AdvOBInit.OptionType = OBEX_BOOTCONFIG; | |
| 1327 HAL_FLASHEx_AdvOBGetConfig(&AdvOBInit); | |
| 1328 | |
| 1329 // Enable/Disable dual boot feature | |
| 1330 if (((AdvOBInit.BootConfig) & (FLASH_OPTCR_BFB2)) == FLASH_OPTCR_BFB2) | |
| 1331 { | |
| 1332 AdvOBInit.BootConfig = OB_DUAL_BOOT_DISABLE; | |
| 1333 HAL_FLASHEx_AdvOBProgram (&AdvOBInit); | |
| 1334 } | |
| 1335 else | |
| 1336 { | |
| 1337 AdvOBInit.BootConfig = OB_DUAL_BOOT_ENABLE; | |
| 1338 HAL_FLASHEx_AdvOBProgram (&AdvOBInit); | |
| 1339 } | |
| 1340 | |
| 1341 // Start the Option Bytes programming process | |
| 1342 if (HAL_FLASH_OB_Launch() != HAL_OK) | |
| 1343 { | |
| 1344 // User can add here some code to deal with this error | |
| 1345 while (1) | |
| 1346 { | |
| 1347 } | |
| 1348 } | |
| 1349 // Prevent Access to option bytes sector | |
| 1350 HAL_FLASH_OB_Lock(); | |
| 1351 | |
| 1352 // Disable the Flash option control register access (recommended to protect | |
| 1353 // the option Bytes against possible unwanted operations) | |
| 1354 HAL_FLASH_Lock(); | |
| 1355 | |
| 1356 // Initiates a system reset request to reset the MCU | |
| 1357 reset_to_firmware_using_Watchdog(); | |
| 1358 } | |
| 1359 */ | |
| 1360 /** | |
| 1361 ****************************************************************************** | |
| 1362 ****************************************************************************** | |
| 1363 ****************************************************************************** | |
| 1364 */ | |
| 1365 | |
| 1366 | |
| 1367 /** | |
| 1368 * @brief DMA2D configuration. | |
| 1369 * @note This function Configure tha DMA2D peripheral : | |
| 1370 * 1) Configure the transfer mode : memory to memory W/ pixel format conversion | |
| 1371 * 2) Configure the output color mode as ARGB4444 | |
| 1372 * 3) Configure the output memory address at SRAM memory | |
| 1373 * 4) Configure the data size : 320x120 (pixels) | |
| 1374 * 5) Configure the input color mode as ARGB8888 | |
| 1375 * 6) Configure the input memory address at FLASH memory | |
| 1376 * @retval | |
| 1377 * None | |
| 1378 */ | |
| 1379 | |
| 1380 static void SDRAM_Config(void) | |
| 1381 { | |
| 1382 /*##-1- Configure the SDRAM device #########################################*/ | |
| 1383 /* SDRAM device configuration */ | |
| 1384 hsdram.Instance = FMC_SDRAM_DEVICE; | |
| 1385 | |
| 1386 /* Timing configuration for 90 Mhz of SD clock frequency (180Mhz/2) */ | |
| 1387 /* TMRD: 2 Clock cycles */ | |
| 1388 SDRAM_Timing.LoadToActiveDelay = 2; | |
| 1389 /* TXSR: min=70ns (6x11.90ns) */ | |
| 1390 SDRAM_Timing.ExitSelfRefreshDelay = 7; | |
| 1391 /* TRAS: min=42ns (4x11.90ns) max=120k (ns) */ | |
| 1392 SDRAM_Timing.SelfRefreshTime = 4; | |
| 1393 /* TRC: min=63 (6x11.90ns) */ | |
| 1394 SDRAM_Timing.RowCycleDelay = 7; | |
| 1395 /* TWR: 2 Clock cycles */ | |
| 1396 SDRAM_Timing.WriteRecoveryTime = 2; | |
| 1397 /* TRP: 15ns => 2x11.90ns */ | |
| 1398 SDRAM_Timing.RPDelay = 2; | |
| 1399 /* TRCD: 15ns => 2x11.90ns */ | |
| 1400 SDRAM_Timing.RCDDelay = 2; | |
| 1401 | |
| 1402 hsdram.Init.SDBank = FMC_SDRAM_BANK2; | |
| 1403 hsdram.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9; | |
| 1404 hsdram.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13; | |
| 1405 hsdram.Init.MemoryDataWidth = SDRAM_MEMORY_WIDTH; | |
| 1406 hsdram.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4; | |
| 1407 hsdram.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3; | |
| 1408 hsdram.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE; | |
| 1409 hsdram.Init.SDClockPeriod = SDCLOCK_PERIOD; | |
| 1410 hsdram.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE; | |
| 1411 hsdram.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_1; | |
| 1412 | |
| 1413 /* Initialize the SDRAM controller */ | |
| 1414 if(HAL_SDRAM_Init(&hsdram, &SDRAM_Timing) != HAL_OK) | |
| 1415 { | |
| 1416 /* Initialization Error */ | |
| 1417 Error_Handler(); | |
| 1418 } | |
| 1419 | |
| 1420 /* Program the SDRAM external device */ | |
| 1421 SDRAM_Initialization_Sequence(&hsdram, &command); | |
| 1422 } | |
| 1423 | |
| 1424 | |
| 1425 uint8_t checkResetForFirmwareUpdate(void) | |
| 1426 { | |
| 1427 uint32_t backupRegisterContent; | |
| 1428 | |
| 1429 RTC_HandleTypeDef RtcHandle; | |
| 1430 RtcHandle.Instance = RTC; | |
| 1431 backupRegisterContent = HAL_RTCEx_BKUPRead(&RtcHandle,RTC_BKP_DR0); | |
| 1432 | |
| 1433 if(backupRegisterContent == 0x12345678) | |
| 1434 return 1; | |
| 1435 else | |
| 1436 return 0; | |
| 1437 } | |
| 1438 | |
| 1439 void DeleteResetToFirmwareUpdateRegister(void) | |
| 1440 { | |
| 1441 RTC_HandleTypeDef RtcHandle; | |
| 1442 RtcHandle.Instance = RTC; | |
| 1443 __HAL_RTC_WRITEPROTECTION_DISABLE(&RtcHandle); | |
| 1444 HAL_RTCEx_BKUPWrite(&RtcHandle,RTC_BKP_DR0,0x00); | |
| 1445 __HAL_RTC_WRITEPROTECTION_ENABLE(&RtcHandle); | |
| 1446 } | |
| 1447 | |
| 1448 #ifdef USE_FULL_ASSERT | |
| 1449 | |
| 1450 /** | |
| 1451 * @brief Reports the name of the source file and the source line number | |
| 1452 * where the assert_param error has occurred. | |
| 1453 * @param file: pointer to the source file name | |
| 1454 * @param line: assert_param error line source number | |
| 1455 * @retval None | |
| 1456 */ | |
| 1457 void assert_failed(uint8_t* file, uint32_t line) | |
| 1458 { | |
| 1459 /* User can add his own implementation to report the file name and line number, | |
| 1460 ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ | |
| 1461 | |
| 1462 /* Infinite loop */ | |
| 1463 while (1) | |
| 1464 { | |
| 1465 } | |
| 1466 } | |
| 1467 #endif | |
| 1468 | |
| 1469 /* | |
| 1470 static void DualBootToBootloader(void) | |
| 1471 { | |
| 1472 // Set BFB2 bit to enable boot from Flash Bank2 | |
| 1473 // Allow Access to Flash control registers and user Falsh | |
| 1474 HAL_FLASH_Unlock(); | |
| 1475 | |
| 1476 // Allow Access to option bytes sector | |
| 1477 HAL_FLASH_OB_Unlock(); | |
| 1478 | |
| 1479 // Get the Dual boot configuration status | |
| 1480 AdvOBInit.OptionType = OPTIONBYTE_BOOTCONFIG; | |
| 1481 HAL_FLASHEx_AdvOBGetConfig(&AdvOBInit); | |
| 1482 | |
| 1483 // Enable/Disable dual boot feature | |
| 1484 if (((AdvOBInit.BootConfig) & (FLASH_OPTCR_BFB2)) == FLASH_OPTCR_BFB2) | |
| 1485 { | |
| 1486 AdvOBInit.BootConfig = OB_DUAL_BOOT_DISABLE; | |
| 1487 HAL_FLASHEx_AdvOBProgram (&AdvOBInit); | |
| 1488 if (HAL_FLASH_OB_Launch() != HAL_OK) | |
| 1489 { | |
| 1490 while (1) | |
| 1491 { | |
| 1492 } | |
| 1493 } | |
| 1494 } | |
| 1495 else | |
| 1496 { | |
| 1497 | |
| 1498 AdvOBInit.BootConfig = OB_DUAL_BOOT_ENABLE; | |
| 1499 HAL_FLASHEx_AdvOBProgram (&AdvOBInit); | |
| 1500 if (HAL_FLASH_OB_Launch() != HAL_OK) | |
| 1501 { | |
| 1502 while (1) | |
| 1503 { | |
| 1504 } | |
| 1505 } | |
| 1506 } | |
| 1507 | |
| 1508 // Prevent Access to option bytes sector | |
| 1509 HAL_FLASH_OB_Lock(); | |
| 1510 | |
| 1511 / Disable the Flash option control register access (recommended to protect | |
| 1512 // the option Bytes against possible unwanted operations) | |
| 1513 HAL_FLASH_Lock(); | |
| 1514 | |
| 1515 // Initiates a system reset request to reset the MCU | |
| 1516 reset_to_firmware_using_Watchdog(); | |
| 1517 } | |
| 1518 */ | |
| 1519 | |
| 1520 void reset_to_update_using_system_reset(void) | |
| 1521 { | |
| 1522 __HAL_RCC_CLEAR_RESET_FLAGS(); | |
| 1523 HAL_NVIC_SystemReset(); | |
| 1524 } | |
| 1525 | |
| 1526 void reset_to_firmware_using_Watchdog(void) | |
| 1527 { | |
| 1528 __HAL_RCC_CLEAR_RESET_FLAGS(); | |
| 1529 __HAL_RCC_WWDG_CLK_ENABLE(); | |
| 1530 | |
| 1531 WWDG_HandleTypeDef WwdgHandle; | |
| 1532 WwdgHandle.Instance = WWDG; | |
| 1533 | |
| 1534 WwdgHandle.Init.Prescaler = WWDG_PRESCALER_8; | |
| 1535 WwdgHandle.Init.Window = 80; | |
| 1536 WwdgHandle.Init.Counter = 127; | |
| 1537 | |
| 1538 HAL_WWDG_Init(&WwdgHandle); | |
| 869 | 1539 /* HAL_WWDG_Start(&WwdgHandle); has been removed from HAL library starting_V120 */ |
| 30 | 1540 while(1); |
| 1541 } | |
| 1542 | |
| 1543 | |
| 1544 void set_returnFromComm(void) | |
| 1545 { | |
| 1546 returnFromCommCleanUpRequest = 1; | |
| 1547 } | |
| 1548 | |
| 1549 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |