| Sat, 15 Oct 2011 13:45:15 +0200 |
heinrichsweikamp |
quick fix for wrong wait routines
|
| Thu, 13 Oct 2011 09:54:21 +0200 |
heinrichsweikamp |
beta 2.03 start...
|
| Thu, 13 Oct 2011 09:41:02 +0200 |
heinrichsweikamp |
Tweaking gamma values
|
| Thu, 13 Oct 2011 08:37:26 +0200 |
heinrichsweikamp |
lock sensor for surfacemode until value is stable
|
| Thu, 13 Oct 2011 08:20:58 +0200 |
heinrichsweikamp |
Merge with 478
|
| Tue, 11 Oct 2011 21:17:05 +0200 |
heinrichsweikamp |
relative path changed for include
|
| Thu, 13 Oct 2011 01:59:59 +0200 |
JeanDo |
Enable reset in cave bailout prediction, by using chrono average depth.
|
| Wed, 12 Oct 2011 19:02:38 +0200 |
JeanDo |
New SAC (CF56/CF57) in 5..50 l/min range (no more decimal).
|
| Mon, 10 Oct 2011 01:15:14 +0200 |
JeanDo |
BUGFIX dump screen top line in flip mode (OSTC 2N).
|
| Sun, 09 Oct 2011 23:37:59 +0200 |
JeanDo |
Cave bailout prediction.
|
| Sun, 09 Oct 2011 22:18:25 +0200 |
heinrichsweikamp |
some nops for read command
|
| Sun, 09 Oct 2011 22:12:09 +0200 |
heinrichsweikamp |
Reset sensor state when waking up
|
| Sun, 09 Oct 2011 17:38:41 +0200 |
JeanDo |
2.02 beta starting
|
| Sun, 09 Oct 2011 17:36:07 +0200 |
JeanDo |
Merge with Bugfix 463
|
| Sun, 25 Sep 2011 17:39:44 +0200 |
JeanDo |
BUGFIX infinite loop when deco table full.
|
| Thu, 06 Oct 2011 23:34:47 +0200 |
heinrichsweikamp |
fine-tune waits for 16MHz
|
| Thu, 06 Oct 2011 23:30:47 +0200 |
heinrichsweikamp |
SPI for sensor in 32MHz
|
| Mon, 03 Oct 2011 09:38:20 +0200 |
heinrichsweikamp |
show firmware version in logbook correctly
|
| Mon, 03 Oct 2011 09:36:53 +0200 |
heinrichsweikamp |
show firmware version in logbook correctly
2.01stable
|
| Sun, 02 Oct 2011 18:01:24 +0200 |
heinrichsweikamp |
cleanup
|
| Sun, 02 Oct 2011 17:54:30 +0200 |
heinrichsweikamp |
Merge with 2.01stable
|
| Sun, 02 Oct 2011 17:52:16 +0200 |
heinrichsweikamp |
Fix reset gas from 2.0stable
2.01stable
|
| Tue, 27 Sep 2011 22:23:12 +0200 |
heinrichsweikamp |
Experimental 32MHz mode
|
| Sun, 25 Sep 2011 10:30:53 +0200 |
heinrichsweikamp |
move ppO2 display two pixels up
|
| Fri, 23 Sep 2011 01:32:17 +0200 |
JeanDo |
Minor fix checking first stop on surface
|
| Fri, 23 Sep 2011 00:42:57 +0200 |
JeanDo |
BUGFIX round depth before checking surface
|
| Thu, 01 Sep 2011 14:39:44 +0200 |
heinrichsweikamp |
fix reset gas with non-initialised eeprom
|
| Thu, 01 Sep 2011 12:22:46 +0200 |
heinrichsweikamp |
Store divisor_deco=0 for apnoe dives
|
| Thu, 01 Sep 2011 11:57:11 +0200 |
heinrichsweikamp |
no decodata in logbook for apnea dives
|
| Wed, 31 Aug 2011 09:27:16 +0200 |
heinrichsweikamp |
2.0 release - 2.1 beta start
|
| Tue, 30 Aug 2011 16:29:21 +0200 |
heinrichsweikamp |
last work for 2.0: Fixing 32kB boundary read for logbook
|
| Sun, 28 Aug 2011 17:22:14 +0200 |
heinrichsweikamp |
minor change in license text
|
| Mon, 22 Aug 2011 17:36:30 +0200 |
heinrichsweikamp |
compute desat based on 30min old surface pressure
|
| Fri, 19 Aug 2011 00:56:27 +0200 |
JeanDo |
Minor changes: Tp? curve in orange. Ceilling stippled area.
|
| Thu, 18 Aug 2011 23:33:24 +0200 |
JeanDo |
BUGFIX bad first Tp? and ceiling in logbook curves.
|
| Mon, 15 Aug 2011 10:23:27 +0200 |
heinrichsweikamp |
1.97beta release - 1.98start
|
| Mon, 15 Aug 2011 09:31:30 +0200 |
heinrichsweikamp |
font48 russian added
|
| Sun, 14 Aug 2011 19:19:43 +0200 |
heinrichsweikamp |
lib added
|
| Sun, 14 Aug 2011 16:05:31 +0200 |
heinrichsweikamp |
apply stored setpoint to log
|
| Sat, 13 Aug 2011 09:45:53 +0200 |
heinrichsweikamp |
localisation part2 from Sergei
|
| Thu, 11 Aug 2011 20:01:55 +0200 |
heinrichsweikamp |
localisation part 1 from Sergei
|
| Thu, 11 Aug 2011 13:30:29 +0200 |
heinrichsweikamp |
compiler switch for display tester
|
| Wed, 10 Aug 2011 21:53:17 +0200 |
JeanDo |
BUGFIX: infinite loop for Decoplaner's CNS in CCR mode.
|
| Wed, 10 Aug 2011 20:15:24 +0200 |
heinrichsweikamp |
movlb after deco_calc_CNS_planning
|
| Tue, 09 Aug 2011 18:30:19 +0200 |
JeanDo |
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
|
| Tue, 09 Aug 2011 18:16:03 +0200 |
JeanDo |
NEW: Decoplanner Warms in red if CNS is too high.
|
| Tue, 09 Aug 2011 18:10:27 +0200 |
JeanDo |
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)
|
| Tue, 09 Aug 2011 14:46:55 +0200 |
heinrichsweikamp |
max depth in logbook had salinity applied already...
|
| Sun, 07 Aug 2011 21:01:13 +0200 |
heinrichsweikamp |
bug-hunt for temperature curve
|
| Sat, 06 Aug 2011 08:28:44 +0200 |
heinrichsweikamp |
Merge
|
| Thu, 04 Aug 2011 22:35:12 +0200 |
heinrichsweikamp |
Merge 431
|
| Thu, 04 Aug 2011 22:33:13 +0200 |
heinrichsweikamp |
merge with 431
|
| Thu, 04 Aug 2011 22:26:24 +0200 |
heinrichsweikamp |
apply salinity and 0.98bar/10m in internal logbook, show gf_lo/gf_hi on page three (Instead of gf_hi/gf_lo)
|
| Fri, 05 Aug 2011 05:52:01 +0200 |
JeanDo |
Added Screen test sequence (raw data menu).
|
| Thu, 04 Aug 2011 21:50:02 +0200 |
JeanDo |
French minor changes.
|
| Thu, 04 Aug 2011 18:54:26 +0200 |
JeanDo |
Minor logbook cleanups.
|
