Mercurial > public > mk2
graph
-
BUGFIX (minor) deco_calc_CNS_planning should save ppO2 and gas switch history.Sat, 29 Oct 2011 15:53:21 +0200, by JeanDo
-
Cleanup shared_definitions include pathMon, 17 Oct 2011 21:55:09 +0200, by JeanDo
-
BUGFIX Missed surface pressure for CNS in decoplan.Mon, 17 Oct 2011 21:39:48 +0200, by JeanDo
-
beta 2.04 start...Sun, 16 Oct 2011 13:37:14 +0200, by heinrichsweikamp
-
making waitms speed-independent, desat-time fixSat, 15 Oct 2011 15:03:53 +0200, by heinrichsweikamp
-
quick fix for wrong wait routinesSat, 15 Oct 2011 13:45:15 +0200, by heinrichsweikamp
-
beta 2.03 start...Thu, 13 Oct 2011 09:54:21 +0200, by heinrichsweikamp
-
Tweaking gamma valuesThu, 13 Oct 2011 09:41:02 +0200, by heinrichsweikamp
-
lock sensor for surfacemode until value is stableThu, 13 Oct 2011 08:37:26 +0200, by heinrichsweikamp
-
Merge with 478Thu, 13 Oct 2011 08:20:58 +0200, by heinrichsweikamp
-
relative path changed for includeTue, 11 Oct 2011 21:17:05 +0200, by heinrichsweikamp
-
Enable reset in cave bailout prediction, by using chrono average depth.Thu, 13 Oct 2011 01:59:59 +0200, by JeanDo
-
New SAC (CF56/CF57) in 5..50 l/min range (no more decimal).Wed, 12 Oct 2011 19:02:38 +0200, by JeanDo
-
BUGFIX dump screen top line in flip mode (OSTC 2N).Mon, 10 Oct 2011 01:15:14 +0200, by JeanDo
-
Cave bailout prediction.Sun, 09 Oct 2011 23:37:59 +0200, by JeanDo
-
some nops for read commandSun, 09 Oct 2011 22:18:25 +0200, by heinrichsweikamp
-
Reset sensor state when waking upSun, 09 Oct 2011 22:12:09 +0200, by heinrichsweikamp
-
2.02 beta startingSun, 09 Oct 2011 17:38:41 +0200, by JeanDo
-
Merge with Bugfix 463Sun, 09 Oct 2011 17:36:07 +0200, by JeanDo
-
BUGFIX infinite loop when deco table full.Sun, 25 Sep 2011 17:39:44 +0200, by JeanDo
-
fine-tune waits for 16MHzThu, 06 Oct 2011 23:34:47 +0200, by heinrichsweikamp
-
SPI for sensor in 32MHzThu, 06 Oct 2011 23:30:47 +0200, by heinrichsweikamp
-
show firmware version in logbook correctlyMon, 03 Oct 2011 09:38:20 +0200, by heinrichsweikamp
-
show firmware version in logbook correctly 2.01stableMon, 03 Oct 2011 09:36:53 +0200, by heinrichsweikamp
-
cleanupSun, 02 Oct 2011 18:01:24 +0200, by heinrichsweikamp
-
Merge with 2.01stableSun, 02 Oct 2011 17:54:30 +0200, by heinrichsweikamp
-
Experimental 32MHz modeTue, 27 Sep 2011 22:23:12 +0200, by heinrichsweikamp
-
move ppO2 display two pixels upSun, 25 Sep 2011 10:30:53 +0200, by heinrichsweikamp
-
Minor fix checking first stop on surfaceFri, 23 Sep 2011 01:32:17 +0200, by JeanDo
-
BUGFIX round depth before checking surfaceFri, 23 Sep 2011 00:42:57 +0200, by JeanDo
-
fix reset gas with non-initialised eepromThu, 01 Sep 2011 14:39:44 +0200, by heinrichsweikamp
-
Store divisor_deco=0 for apnoe divesThu, 01 Sep 2011 12:22:46 +0200, by heinrichsweikamp
-
no decodata in logbook for apnea divesThu, 01 Sep 2011 11:57:11 +0200, by heinrichsweikamp
-
2.0 release - 2.1 beta startWed, 31 Aug 2011 09:27:16 +0200, by heinrichsweikamp
-
last work for 2.0: Fixing 32kB boundary read for logbookTue, 30 Aug 2011 16:29:21 +0200, by heinrichsweikamp
-
minor change in license textSun, 28 Aug 2011 17:22:14 +0200, by heinrichsweikamp
-
compute desat based on 30min old surface pressureMon, 22 Aug 2011 17:36:30 +0200, by heinrichsweikamp
-
Minor changes: Tp? curve in orange. Ceilling stippled area.Fri, 19 Aug 2011 00:56:27 +0200, by JeanDo
-
BUGFIX bad first Tp? and ceiling in logbook curves.Thu, 18 Aug 2011 23:33:24 +0200, by JeanDo
-
1.97beta release - 1.98startMon, 15 Aug 2011 10:23:27 +0200, by heinrichsweikamp
-
font48 russian addedMon, 15 Aug 2011 09:31:30 +0200, by heinrichsweikamp
-
lib addedSun, 14 Aug 2011 19:19:43 +0200, by heinrichsweikamp
-
apply stored setpoint to logSun, 14 Aug 2011 16:05:31 +0200, by heinrichsweikamp
-
localisation part2 from SergeiSat, 13 Aug 2011 09:45:53 +0200, by heinrichsweikamp
-
localisation part 1 from SergeiThu, 11 Aug 2011 20:01:55 +0200, by heinrichsweikamp
-
compiler switch for display testerThu, 11 Aug 2011 13:30:29 +0200, by heinrichsweikamp
-
BUGFIX: infinite loop for Decoplaner's CNS in CCR mode.Wed, 10 Aug 2011 21:53:17 +0200, by JeanDo
-
movlb after deco_calc_CNS_planningWed, 10 Aug 2011 20:15:24 +0200, by heinrichsweikamp
-
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.Tue, 09 Aug 2011 18:30:19 +0200, by JeanDo
-
NEW: Decoplanner Warms in red if CNS is too high.Tue, 09 Aug 2011 18:16:03 +0200, by JeanDo
-
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)Tue, 09 Aug 2011 18:10:27 +0200, by JeanDo
-
max depth in logbook had salinity applied already...Tue, 09 Aug 2011 14:46:55 +0200, by heinrichsweikamp
-
bug-hunt for temperature curveSun, 07 Aug 2011 21:01:13 +0200, by heinrichsweikamp
-
MergeSat, 06 Aug 2011 08:28:44 +0200, by heinrichsweikamp
-
Merge 431Thu, 04 Aug 2011 22:35:12 +0200, by heinrichsweikamp
-
merge with 431Thu, 04 Aug 2011 22:33:13 +0200, by heinrichsweikamp
-
apply salinity and 0.98bar/10m in internal logbook, show gf_lo/gf_hi on page three (Instead of gf_hi/gf_lo)Thu, 04 Aug 2011 22:26:24 +0200, by heinrichsweikamp
-
Added Screen test sequence (raw data menu).Fri, 05 Aug 2011 05:52:01 +0200, by JeanDo
-
French minor changes.Thu, 04 Aug 2011 21:50:02 +0200, by JeanDo
-
Minor logbook cleanups.Thu, 04 Aug 2011 18:54:26 +0200, by JeanDo
-
traling space for simulator dataThu, 04 Aug 2011 07:44:03 +0200, by heinrichsweikamp
-
russian updateThu, 04 Aug 2011 07:38:36 +0200, by heinrichsweikamp
-
Fixed -2?C .. +35?C scale for logbook display.Wed, 03 Aug 2011 00:54:41 +0200, by JeanDo
-
Adding temperature & ceiling curvesSun, 31 Jul 2011 13:27:23 +0200, by JeanDo
-
Minor cleanupsSun, 31 Jul 2011 13:27:20 +0200, by JeanDo
-
added russian text versionTue, 02 Aug 2011 20:39:06 +0200, by heinrichsweikamp
-
1.95 release - 1.96 startTue, 02 Aug 2011 12:25:13 +0200, by heinrichsweikamp
-
fix ram banking in "Reset all"Tue, 02 Aug 2011 11:59:36 +0200, by heinrichsweikamp
-
copy from amb_pressure_avg to amb_pressure for compatibilityWed, 20 Jul 2011 19:21:21 +0200, by heinrichsweikamp
-
update of some french textsWed, 20 Jul 2011 15:44:35 +0200, by heinrichsweikamp
-
0.98bar equal 10m depths with salinity set to 1.00kg/lWed, 20 Jul 2011 12:49:29 +0200, by heinrichsweikamp
-
1.94 release - 1.95startTue, 19 Jul 2011 13:52:29 +0200, by heinrichsweikamp
-
second space for simulatorMon, 18 Jul 2011 16:34:30 +0200, by heinrichsweikamp
-
diabling uart module when no USB is attachedMon, 18 Jul 2011 09:44:25 +0200, by heinrichsweikamp
-
fixing issue with end-of-dive threshold in high-altitude modeSun, 17 Jul 2011 17:23:25 +0200, by heinrichsweikamp
-
Fixing issue #53Sat, 16 Jul 2011 13:25:23 +0200, by heinrichsweikamp
-
testingSat, 16 Jul 2011 09:32:31 +0200, by heinrichsweikamp
-
small cleanupWed, 13 Jul 2011 11:12:43 +0200, by heinrichsweikamp
-
BUGFIX: CNS was not cleared with a "Reset Deco"Tue, 12 Jul 2011 20:21:57 +0200, by heinrichsweikamp
-
remove of red ambient pressure (High altitude mode)Mon, 11 Jul 2011 16:04:35 +0200, by heinrichsweikamp
-
1.93beta release - 1.94beta startFri, 08 Jul 2011 19:12:48 +0200, by heinrichsweikamp
-
NEW: End-of-Dive countdown displayed after surfacingThu, 07 Jul 2011 21:22:05 +0200, by heinrichsweikamp
-
BUGFIX: SetPoint recording for logbookThu, 07 Jul 2011 20:17:01 +0200, by heinrichsweikamp
-
Bug #52 fixed (ppO2 blinking if setpoint is not physically possible)Wed, 06 Jul 2011 22:06:40 +0200, by heinrichsweikamp
-
1.92beta release - 1.93beta startThu, 30 Jun 2011 19:47:53 +0200, by heinrichsweikamp
-
Add a setpoint change to the first depth sample in CC modeWed, 29 Jun 2011 07:32:07 +0200, by heinrichsweikamp
-
gas change blink in yellowTue, 28 Jun 2011 22:37:02 +0200, by heinrichsweikamp
-
Add a trailing space for nofly and desatMon, 27 Jun 2011 10:15:28 +0200, by heinrichsweikamp
-
Ignore 5mbar pressure sensor noise in surface screenSun, 26 Jun 2011 18:07:51 +0200, by heinrichsweikamp
-
fixes issue #48Sun, 26 Jun 2011 12:30:42 +0200, by heinrichsweikamp
-
Merge 397 with 398Sun, 26 Jun 2011 12:27:28 +0200, by heinrichsweikamp
-
Fixing issue 50, correct "Bar" to "bar" in texts and commentsSun, 26 Jun 2011 12:24:54 +0200, by heinrichsweikamp
-
BUGFIX Color coding ppO2 > 4.9 (bug #50)Sat, 25 Jun 2011 23:48:40 +0200, by JeanDo
-
BUGFIX display hypoxic air in divemode (bug #41)Thu, 23 Jun 2011 01:41:39 +0200, by JeanDo
-
Merge with 64kByte LogbookThu, 23 Jun 2011 01:37:59 +0200, by JeanDo
-
1.91beta release - 1.92beta start 64kByte LogbookTue, 21 Jun 2011 19:36:59 +0200, by heinrichsweikamp
-
Added velocity in divemode, BIG stopwatch in Gauge mode 64kByte LogbookSat, 18 Jun 2011 20:17:39 +0200, by heinrichsweikamp
-
Work-Around for "Reset all" overwriting 0x00 to 0x04 in EEPROM Bank1 64kByte LogbookSat, 18 Jun 2011 11:26:22 +0200, by heinrichsweikamp
-
negative temperature in logbook and battery info menu 64kByte LogbookWed, 15 Jun 2011 20:08:30 +0200, by heinrichsweikamp
-
fixing random desat time after update 64kByte LogbookTue, 14 Jun 2011 22:31:24 +0200, by Heinrichsweikamp
-
First gas can be reset to 0m, test for timer1 race condition 64kByte LogbookMon, 13 Jun 2011 07:45:59 +0200, by heinrichsweikamp
-
first gas does not reset change depth, display fix with multigas dives in logbook 64kByte LogbookSun, 12 Jun 2011 21:27:07 +0200, by heinrichsweikamp
-
show saturation multiplier in logbook 64kByte LogbookSun, 12 Jun 2011 16:18:22 +0200, by heinrichsweikamp
-
GF profile. GF and Decotype in Logbok 64kByte LogbookSun, 12 Jun 2011 08:52:41 +0200, by Heinrichsweikamp
-
added GF_hi, GF_lo and deco model to dive header 64kByte LogbookFri, 10 Jun 2011 17:47:52 +0200, by Heinrichsweikamp