Mercurial > public > mk2
graph
-
beta 2.04 start...Sun, 16 Oct 2011 13:37:14 +0200, by heinrichsweikamp
-
making waitms speed-independent, desat-time fixSat, 15 Oct 2011 15:03:53 +0200, by heinrichsweikamp
-
quick fix for wrong wait routinesSat, 15 Oct 2011 13:45:15 +0200, by heinrichsweikamp
-
beta 2.03 start...Thu, 13 Oct 2011 09:54:21 +0200, by heinrichsweikamp
-
Tweaking gamma valuesThu, 13 Oct 2011 09:41:02 +0200, by heinrichsweikamp
-
lock sensor for surfacemode until value is stableThu, 13 Oct 2011 08:37:26 +0200, by heinrichsweikamp
-
Merge with 478Thu, 13 Oct 2011 08:20:58 +0200, by heinrichsweikamp
-
relative path changed for includeTue, 11 Oct 2011 21:17:05 +0200, by heinrichsweikamp
-
Enable reset in cave bailout prediction, by using chrono average depth.Thu, 13 Oct 2011 01:59:59 +0200, by JeanDo
-
New SAC (CF56/CF57) in 5..50 l/min range (no more decimal).Wed, 12 Oct 2011 19:02:38 +0200, by JeanDo
-
BUGFIX dump screen top line in flip mode (OSTC 2N).Mon, 10 Oct 2011 01:15:14 +0200, by JeanDo
-
Cave bailout prediction.Sun, 09 Oct 2011 23:37:59 +0200, by JeanDo
-
some nops for read commandSun, 09 Oct 2011 22:18:25 +0200, by heinrichsweikamp
-
Reset sensor state when waking upSun, 09 Oct 2011 22:12:09 +0200, by heinrichsweikamp
-
2.02 beta startingSun, 09 Oct 2011 17:38:41 +0200, by JeanDo
-
Merge with Bugfix 463Sun, 09 Oct 2011 17:36:07 +0200, by JeanDo
-
BUGFIX infinite loop when deco table full.Sun, 25 Sep 2011 17:39:44 +0200, by JeanDo
-
fine-tune waits for 16MHzThu, 06 Oct 2011 23:34:47 +0200, by heinrichsweikamp
-
SPI for sensor in 32MHzThu, 06 Oct 2011 23:30:47 +0200, by heinrichsweikamp
-
show firmware version in logbook correctlyMon, 03 Oct 2011 09:38:20 +0200, by heinrichsweikamp
-
show firmware version in logbook correctly 2.01stableMon, 03 Oct 2011 09:36:53 +0200, by heinrichsweikamp
-
cleanupSun, 02 Oct 2011 18:01:24 +0200, by heinrichsweikamp
-
Merge with 2.01stableSun, 02 Oct 2011 17:54:30 +0200, by heinrichsweikamp
-
Experimental 32MHz modeTue, 27 Sep 2011 22:23:12 +0200, by heinrichsweikamp
-
move ppO2 display two pixels upSun, 25 Sep 2011 10:30:53 +0200, by heinrichsweikamp
-
Minor fix checking first stop on surfaceFri, 23 Sep 2011 01:32:17 +0200, by JeanDo
-
BUGFIX round depth before checking surfaceFri, 23 Sep 2011 00:42:57 +0200, by JeanDo
-
fix reset gas with non-initialised eepromThu, 01 Sep 2011 14:39:44 +0200, by heinrichsweikamp
-
Store divisor_deco=0 for apnoe divesThu, 01 Sep 2011 12:22:46 +0200, by heinrichsweikamp
-
no decodata in logbook for apnea divesThu, 01 Sep 2011 11:57:11 +0200, by heinrichsweikamp
-
2.0 release - 2.1 beta startWed, 31 Aug 2011 09:27:16 +0200, by heinrichsweikamp
-
last work for 2.0: Fixing 32kB boundary read for logbookTue, 30 Aug 2011 16:29:21 +0200, by heinrichsweikamp
-
minor change in license textSun, 28 Aug 2011 17:22:14 +0200, by heinrichsweikamp
-
compute desat based on 30min old surface pressureMon, 22 Aug 2011 17:36:30 +0200, by heinrichsweikamp
-
Minor changes: Tp? curve in orange. Ceilling stippled area.Fri, 19 Aug 2011 00:56:27 +0200, by JeanDo
-
BUGFIX bad first Tp? and ceiling in logbook curves.Thu, 18 Aug 2011 23:33:24 +0200, by JeanDo
-
1.97beta release - 1.98startMon, 15 Aug 2011 10:23:27 +0200, by heinrichsweikamp
-
font48 russian addedMon, 15 Aug 2011 09:31:30 +0200, by heinrichsweikamp
-
lib addedSun, 14 Aug 2011 19:19:43 +0200, by heinrichsweikamp
-
apply stored setpoint to logSun, 14 Aug 2011 16:05:31 +0200, by heinrichsweikamp
-
localisation part2 from SergeiSat, 13 Aug 2011 09:45:53 +0200, by heinrichsweikamp
-
localisation part 1 from SergeiThu, 11 Aug 2011 20:01:55 +0200, by heinrichsweikamp
-
compiler switch for display testerThu, 11 Aug 2011 13:30:29 +0200, by heinrichsweikamp
-
BUGFIX: infinite loop for Decoplaner's CNS in CCR mode.Wed, 10 Aug 2011 21:53:17 +0200, by JeanDo
-
movlb after deco_calc_CNS_planningWed, 10 Aug 2011 20:15:24 +0200, by heinrichsweikamp
-
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.Tue, 09 Aug 2011 18:30:19 +0200, by JeanDo
-
NEW: Decoplanner Warms in red if CNS is too high.Tue, 09 Aug 2011 18:16:03 +0200, by JeanDo
-
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)Tue, 09 Aug 2011 18:10:27 +0200, by JeanDo
-
max depth in logbook had salinity applied already...Tue, 09 Aug 2011 14:46:55 +0200, by heinrichsweikamp
-
bug-hunt for temperature curveSun, 07 Aug 2011 21:01:13 +0200, by heinrichsweikamp
-
MergeSat, 06 Aug 2011 08:28:44 +0200, by heinrichsweikamp
-
Merge 431Thu, 04 Aug 2011 22:35:12 +0200, by heinrichsweikamp
-
merge with 431Thu, 04 Aug 2011 22:33:13 +0200, by heinrichsweikamp
-
apply salinity and 0.98bar/10m in internal logbook, show gf_lo/gf_hi on page three (Instead of gf_hi/gf_lo)Thu, 04 Aug 2011 22:26:24 +0200, by heinrichsweikamp
-
Added Screen test sequence (raw data menu).Fri, 05 Aug 2011 05:52:01 +0200, by JeanDo