mk2: revision graph

graph

less more | rev 527: (0) -112 +112 tip

Minor: should not reset char_I_depth_last_deco.
Mon, 12 Dec 2011 18:21:21 +0100, by JeanDo
2.07beta release - 2.08beta start
Sat, 10 Dec 2011 16:20:48 +0100, by heinrichsweikamp
moving "bailout" on top of setpoint list
Sat, 10 Dec 2011 16:07:50 +0100, by heinrichsweikamp
BUGFIX spurious random NDL>0 during deco dive.
Fri, 09 Dec 2011 20:43:50 +0100, by JeanDo
New no need to check stops while in NDL.
Fri, 09 Dec 2011 20:43:46 +0100, by JeanDo
New ASSERT_BANK1 macro for software proofing.
Fri, 09 Dec 2011 20:43:43 +0100, by JeanDo
Minor cleanups for TESTING=1 emulator mode.
Fri, 09 Dec 2011 20:43:39 +0100, by JeanDo
BUGFIX bank1 error, deco_calc_wo_deco done twice in start routine.
Fri, 09 Dec 2011 20:43:35 +0100, by JeanDo
NEW added GF surface display.
Tue, 06 Dec 2011 18:02:18 +0100, by JeanDo
Bring back "Max." for max. depth...
Mon, 05 Dec 2011 21:04:10 +0100, by heinrichsweikamp
Backed out changeset: b498245da3f1
Mon, 05 Dec 2011 20:58:10 +0100, by heinrichsweikamp
imperial units patch from Vlad
Mon, 05 Dec 2011 20:40:10 +0100, by heinrichsweikamp
2.06beta release - 2.07beta start
Mon, 05 Dec 2011 14:31:31 +0100, by heinrichsweikamp
BUGFIX spurious CNS bound check.
Sun, 04 Dec 2011 17:46:13 +0100, by JeanDo
BUGFIX MISSING movlb for gaslist (simulator).
Sun, 04 Dec 2011 17:46:08 +0100, by JeanDo
BUGFIX Spurious stop order when simulating deadly fast ascent.
Sun, 04 Dec 2011 17:45:51 +0100, by JeanDo
NEW NDL NDL faster/more precise simu (but no closed formula for trimix).
Fri, 25 Nov 2011 01:56:17 +0100, by JeanDo
changelog
Sun, 20 Nov 2011 23:27:43 +0100, by JeanDo
NEW NDL analytic model (Erik Baker's formula)
Sun, 20 Nov 2011 23:14:18 +0100, by JeanDo
BUGFIX char_I_(N2_ratio/He_ratio) array not inited at boot time
Sun, 20 Nov 2011 22:52:13 +0100, by JeanDo
minor cleanups for TESTING mode
Sun, 20 Nov 2011 22:52:09 +0100, by JeanDo
small cleanup in the logbook
Sun, 20 Nov 2011 17:00:49 +0100, by heinrichsweikamp
fix bb bug #66: CCR air mode: should not blink for my bailout
Sat, 19 Nov 2011 11:35:08 +0100, by heinrichsweikamp
cleanup
Sat, 19 Nov 2011 11:24:50 +0100, by heinrichsweikamp
Update of turkish texts
Sat, 19 Nov 2011 11:16:35 +0100, by heinrichsweikamp
2.05beta release - 2.06beta start
Thu, 17 Nov 2011 08:25:28 +0100, by heinrichsweikamp
FRENCH brightness text updated.
Wed, 16 Nov 2011 13:30:11 +0100, by JeanDo
Reset Brightness after firmware update
Wed, 16 Nov 2011 11:57:21 +0100, by heinrichsweikamp
Added OLED brightness setting, texts 280, 312 and 313 need update
Tue, 15 Nov 2011 20:36:41 +0100, by heinrichsweikamp
minor fixes in german layout
Mon, 14 Nov 2011 08:12:13 +0100, by heinrichsweikamp
show numeric _and_ graphic velocity, move desat, nofly and interval into isr
Wed, 09 Nov 2011 16:17:11 +0100, by heinrichsweikamp
2.05beta start....
Mon, 07 Nov 2011 13:08:52 +0100, by heinrichsweikamp
Turkish language added
Mon, 07 Nov 2011 12:51:25 +0100, by heinrichsweikamp
testing graphical velocity
Mon, 07 Nov 2011 08:39:21 +0100, by heinrichsweikamp
no more cf48 reset after update
Sun, 06 Nov 2011 16:59:27 +0100, by heinrichsweikamp
+CHANGE: Velocity display updated every second
Sun, 06 Nov 2011 11:02:03 +0100, by heinrichsweikamp
BUGFIX Surface desat factor missing for Interval planning in GF mode.
Fri, 04 Nov 2011 16:24:12 +0100, by JeanDo
BUGFIX (minor) deco_calc_CNS_planning should save ppO2 and gas switch history.
Sat, 29 Oct 2011 15:53:21 +0200, by JeanDo
Cleanup shared_definitions include path
Mon, 17 Oct 2011 21:55:09 +0200, by JeanDo
BUGFIX Missed surface pressure for CNS in decoplan.
Mon, 17 Oct 2011 21:39:48 +0200, by JeanDo
beta 2.04 start...
Sun, 16 Oct 2011 13:37:14 +0200, by heinrichsweikamp
making waitms speed-independent, desat-time fix
Sat, 15 Oct 2011 15:03:53 +0200, by heinrichsweikamp
quick fix for wrong wait routines
Sat, 15 Oct 2011 13:45:15 +0200, by heinrichsweikamp
beta 2.03 start...
Thu, 13 Oct 2011 09:54:21 +0200, by heinrichsweikamp
Tweaking gamma values
Thu, 13 Oct 2011 09:41:02 +0200, by heinrichsweikamp
lock sensor for surfacemode until value is stable
Thu, 13 Oct 2011 08:37:26 +0200, by heinrichsweikamp
Merge with 478
Thu, 13 Oct 2011 08:20:58 +0200, by heinrichsweikamp
relative path changed for include
Tue, 11 Oct 2011 21:17:05 +0200, by heinrichsweikamp
Enable reset in cave bailout prediction, by using chrono average depth.
Thu, 13 Oct 2011 01:59:59 +0200, by JeanDo
New SAC (CF56/CF57) in 5..50 l/min range (no more decimal).
Wed, 12 Oct 2011 19:02:38 +0200, by JeanDo
BUGFIX dump screen top line in flip mode (OSTC 2N).
Mon, 10 Oct 2011 01:15:14 +0200, by JeanDo
Cave bailout prediction.
Sun, 09 Oct 2011 23:37:59 +0200, by JeanDo
some nops for read command
Sun, 09 Oct 2011 22:18:25 +0200, by heinrichsweikamp
Reset sensor state when waking up
Sun, 09 Oct 2011 22:12:09 +0200, by heinrichsweikamp
2.02 beta starting
Sun, 09 Oct 2011 17:38:41 +0200, by JeanDo
Merge with Bugfix 463
Sun, 09 Oct 2011 17:36:07 +0200, by JeanDo
BUGFIX infinite loop when deco table full.
Sun, 25 Sep 2011 17:39:44 +0200, by JeanDo
fine-tune waits for 16MHz
Thu, 06 Oct 2011 23:34:47 +0200, by heinrichsweikamp
SPI for sensor in 32MHz
Thu, 06 Oct 2011 23:30:47 +0200, by heinrichsweikamp
show firmware version in logbook correctly
Mon, 03 Oct 2011 09:38:20 +0200, by heinrichsweikamp
show firmware version in logbook correctly 2.01stable
Mon, 03 Oct 2011 09:36:53 +0200, by heinrichsweikamp
cleanup
Sun, 02 Oct 2011 18:01:24 +0200, by heinrichsweikamp
Merge with 2.01stable
Sun, 02 Oct 2011 17:54:30 +0200, by heinrichsweikamp
Fix reset gas from 2.0stable 2.01stable
Sun, 02 Oct 2011 17:52:16 +0200, by heinrichsweikamp
Experimental 32MHz mode
Tue, 27 Sep 2011 22:23:12 +0200, by heinrichsweikamp
move ppO2 display two pixels up
Sun, 25 Sep 2011 10:30:53 +0200, by heinrichsweikamp
Minor fix checking first stop on surface
Fri, 23 Sep 2011 01:32:17 +0200, by JeanDo
BUGFIX round depth before checking surface
Fri, 23 Sep 2011 00:42:57 +0200, by JeanDo
fix reset gas with non-initialised eeprom
Thu, 01 Sep 2011 14:39:44 +0200, by heinrichsweikamp
Store divisor_deco=0 for apnoe dives
Thu, 01 Sep 2011 12:22:46 +0200, by heinrichsweikamp
no decodata in logbook for apnea dives
Thu, 01 Sep 2011 11:57:11 +0200, by heinrichsweikamp
2.0 release - 2.1 beta start
Wed, 31 Aug 2011 09:27:16 +0200, by heinrichsweikamp
last work for 2.0: Fixing 32kB boundary read for logbook
Tue, 30 Aug 2011 16:29:21 +0200, by heinrichsweikamp
minor change in license text
Sun, 28 Aug 2011 17:22:14 +0200, by heinrichsweikamp
compute desat based on 30min old surface pressure
Mon, 22 Aug 2011 17:36:30 +0200, by heinrichsweikamp
Minor changes: Tp? curve in orange. Ceilling stippled area.
Fri, 19 Aug 2011 00:56:27 +0200, by JeanDo
BUGFIX bad first Tp? and ceiling in logbook curves.
Thu, 18 Aug 2011 23:33:24 +0200, by JeanDo
1.97beta release - 1.98start
Mon, 15 Aug 2011 10:23:27 +0200, by heinrichsweikamp
font48 russian added
Mon, 15 Aug 2011 09:31:30 +0200, by heinrichsweikamp
lib added
Sun, 14 Aug 2011 19:19:43 +0200, by heinrichsweikamp
apply stored setpoint to log
Sun, 14 Aug 2011 16:05:31 +0200, by heinrichsweikamp
localisation part2 from Sergei
Sat, 13 Aug 2011 09:45:53 +0200, by heinrichsweikamp
localisation part 1 from Sergei
Thu, 11 Aug 2011 20:01:55 +0200, by heinrichsweikamp
compiler switch for display tester
Thu, 11 Aug 2011 13:30:29 +0200, by heinrichsweikamp
BUGFIX: infinite loop for Decoplaner's CNS in CCR mode.
Wed, 10 Aug 2011 21:53:17 +0200, by JeanDo
movlb after deco_calc_CNS_planning
Wed, 10 Aug 2011 20:15:24 +0200, by heinrichsweikamp
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
Tue, 09 Aug 2011 18:30:19 +0200, by JeanDo
NEW: Decoplanner Warms in red if CNS is too high.
Tue, 09 Aug 2011 18:16:03 +0200, by JeanDo
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)
Tue, 09 Aug 2011 18:10:27 +0200, by JeanDo
max depth in logbook had salinity applied already...
Tue, 09 Aug 2011 14:46:55 +0200, by heinrichsweikamp
bug-hunt for temperature curve
Sun, 07 Aug 2011 21:01:13 +0200, by heinrichsweikamp
Merge
Sat, 06 Aug 2011 08:28:44 +0200, by heinrichsweikamp
Merge 431
Thu, 04 Aug 2011 22:35:12 +0200, by heinrichsweikamp
merge with 431
Thu, 04 Aug 2011 22:33:13 +0200, by heinrichsweikamp
apply salinity and 0.98bar/10m in internal logbook, show gf_lo/gf_hi on page three (Instead of gf_hi/gf_lo)
Thu, 04 Aug 2011 22:26:24 +0200, by heinrichsweikamp
Added Screen test sequence (raw data menu).
Fri, 05 Aug 2011 05:52:01 +0200, by JeanDo
French minor changes.
Thu, 04 Aug 2011 21:50:02 +0200, by JeanDo
Minor logbook cleanups.
Thu, 04 Aug 2011 18:54:26 +0200, by JeanDo
traling space for simulator data
Thu, 04 Aug 2011 07:44:03 +0200, by heinrichsweikamp
russian update
Thu, 04 Aug 2011 07:38:36 +0200, by heinrichsweikamp
Fixed -2?C .. +35?C scale for logbook display.
Wed, 03 Aug 2011 00:54:41 +0200, by JeanDo
Adding temperature & ceiling curves
Sun, 31 Jul 2011 13:27:23 +0200, by JeanDo
Minor cleanups
Sun, 31 Jul 2011 13:27:20 +0200, by JeanDo
added russian text version
Tue, 02 Aug 2011 20:39:06 +0200, by heinrichsweikamp
1.95 release - 1.96 start
Tue, 02 Aug 2011 12:25:13 +0200, by heinrichsweikamp
fix ram banking in "Reset all"
Tue, 02 Aug 2011 11:59:36 +0200, by heinrichsweikamp
copy from amb_pressure_avg to amb_pressure for compatibility
Wed, 20 Jul 2011 19:21:21 +0200, by heinrichsweikamp
update of some french texts
Wed, 20 Jul 2011 15:44:35 +0200, by heinrichsweikamp
0.98bar equal 10m depths with salinity set to 1.00kg/l
Wed, 20 Jul 2011 12:49:29 +0200, by heinrichsweikamp
1.94 release - 1.95start
Tue, 19 Jul 2011 13:52:29 +0200, by heinrichsweikamp
second space for simulator
Mon, 18 Jul 2011 16:34:30 +0200, by heinrichsweikamp
diabling uart module when no USB is attached
Mon, 18 Jul 2011 09:44:25 +0200, by heinrichsweikamp

less more | rev 527: (0) -112 +112 tip

Mercurial > public > mk2

graph