Mercurial > public > mk2
view code_part1/OSTC_code_asm_part1/changelog.txt @ 443:4c7f304de294
BUGFIX: infinite loop for Decoplaner's CNS in CCR mode.
author | JeanDo |
---|---|
date | Wed, 10 Aug 2011 21:53:17 +0200 |
parents | 4826dd98514b |
children | 26e5bb28891d |
line wrap: on
line source
New in 1.96 beta: NEW: Logbook displays ceilings and temperature curve. BUGFIX: Decoplanner accumulates CNS during ascent. NEW: Decoplanner warns in red if CNS is too high. NEW: Decoplanner OC volumes in liters (or bars), up to 65000. New in 1.95 beta: CHANGE: 0.98bar equal 10m depths with salinity set to 1.00kg/l New in 1.94 beta: Pre-Release for 2.0 Stable BUGFIX: CNS was not cleared with a "Reset Deco" CHANGE: Max. depth for simulator now 120m BUGFIX: Ascend threshold in high altitude mode New in 1.93 beta: BETA Version - Do NOT use for diving! BUGFIX: blinking fixed setpoint if actual setpoint lower then physically possible BUGFIX: SetPoint recording for logbook BUGFIX: Divetime seconds synced with stopwatch start NEW: End-of-Dive countdown displayed after surfacing New in 1.92 beta: BETA Version - Do NOT use for diving! BUGFIX: warning color for ppO2>3,3bar and ppO2<6,55bar fixed BUGFIX: Start SetPoint is attached to first depth sample in logbook profile BUGFIX: Simulator menu collided with descent counter in Apnea mode BUGFIX: Display hypoxic air in divemode (bug #41) CHANGE: Gas change indication is displayed in yellow New in 1.91 beta: BETA Version - Do NOT use for diving! BUGFIX: Ignore depths>130m in PC simulation BUGFIX: Avoid spurious CF55 stops with 3 gas or more BUGFIX: Average depth in Logbook (For dives made with >=1.91) BUGFIX: Logbook time scale (squares are 10min * 10m) BUGFIX: Bühlmann half-times rounded to the minute BUGFIX: Protect again rare race contition on pressure/temperature BUGFIX: Time is now accurate CHANGE: CF02 now allows delay of more then 240seconds CHANGE: First gas do not reset change depth CHANGE: Logbook format 21: store & shows dive model (sat/desat or GF_low/high factors), CNS profile, GF profile. WARNING: the upgrade is not reversible without loosing all your profiles. NEW: "Quit Sim" in divemode simulator menu for exiting the simulation NEW: Allow -2:00 to +2:00 adjustement per day (CF48). NEW: 1/10/100 steps in CF menu NEW: 64kByte Logbook (Doubled capacity compared to 1.90) NEW: Additional dive interval for simulator and decoplaning NEW: Negative temperatures in logbook and battery information menu NEW: Screen dump support New in 1.90 Stable: Stable release New in 1.89 beta: BETA Version - Do NOT use for diving! NEW: ppO2 in case of a loop flush can be displayed in CCR mode NEW: Fixed Setpoint with color warnings BUGFIX: Fixed Setpoint behavior >2,55bar with CF38=ON NEW: Future TTS also available in no-deco phase of dive New in 1.88 beta: BETA Version - Do NOT use for diving! CHANGE: CF warning window moved to upper right corner BUGFIX: Gas4 fixed NEW: Future TTS (@xx Variant) in Custom View (Divemode) NEW: CF58 (0-10 min): Computes Future TTS in xx min New in 1.87 beta: BETA Version - Do NOT use for diving! CHANGE: Runtime simulator faster BUGFIX: "Active?" list in Divemode NEW: Display CNS in decoplan NEW: Colored stops in decoplan (CF55 > 0) NEW: 115kbaud/s bootloader NEW: Colored battery sign when charging (yellow) or charged (green) CHANGE: Battery symbol filled BUGFIX: Apply salinity for ceiling warning CHANGE: Gas Setup page 2 reworked (MOD depth default) BUGFIX: x-scale in Logbook fixed CHANGE: Some typos in English text NEW: Display ppO2[Diluent] in CCR modes NEW: Display EAD/END in OCR and CCR modes New in 1.86 beta: BETA Version - Do NOT use for diving! BUGFIX: Average depth in Logbook fixed BUGFIX: Stand-alone simulator New in 1.85 beta: BETA Version - Do NOT use for diving! BUGFIX: zero gas rate (bug bb28) BUGFIX: Safer rounding (bug bb29) CHANGE: making the seconds display in divemode smoother New in 1.84 beta: BETA Version - Do NOT use for diving! BUGFIX: NoFly time should not be reseted after dive simulation. NEW: High altitude (Plane/Fly) mode added NEW: Gaslist, Salinity, CNS and Average depth displayed in Logbook NEW: Internal logbook shows Gas changes NEW: Release in French, Spain, English and German (Use correct HEX file!) CHANGE: Set Time menu New in 1.83 beta: BETA Version - Do NOT use for diving! BUGFIX: gas switch NEW: De/Activate gases underwater (Gaslist -> More -> Actve?) NEW: Gas Consumption caluculation in offline simulator (After Decoplan) NEW: CF56 Bottom gas usage (l/min or bar/min) (For Simulator) NEW: CF57 Ascent/deco gas usage (l/min or bar/min) (For Simulator) New in 1.82 beta: BETA Version - Do NOT use for diving! CHANGE: Speed optimization in Logbook NEW: Scale for Profile view in Logbook (10m,10min) New in 1.81 beta: BETA Version - Do NOT use for diving! NEW: Release in French, Spain and English (Use correct HEX file!) CHANGE: ZH-L16 display all stops (up to 96m), as ZH-L16-GF mode BUGFIX: Don't wrap TTS sum (still limit each stop display (not compute) to ~4h) NEW: CF54: =1:Display shallowest stop first (decoplan and divemode) BUGFIX: Inactive gases greyed-out in Simulator results BUGFIX: "Better Gas" now works for Gas 4 and Gas 5, as well NEW: GF_lo and GF_hi stored in logbook BUGFIX: Gradient factor reworked NEW: CF55: Additional delay for gas switch (decoplan, includng divemode) New in 1.80 Stable: Stable release BUGFIX: No Custom view in Surfacemode as default New in 1.76 Beta: BETA Version - Do NOT use for diving! NEW: "beta" is shown for beta versions CHANGE: NoFly and Desaturation time only visible when > 0 CHANGE: "LowBatt!" Warning in Divemode New in 1.75 Beta: BETA Version - Do NOT use for diving! BUGFIX: Decomask in Gauge mode removed NEW: Decoplan rewritten, now has practically unlimited number of stops (OSTC MK.2 only) NEW: Altimeter (OSTC MK.2 only) BUGFIX: Timeout reset in Customview (OSTC MK.2 only) BUGFIX: Surface Interval NEW: Non-Resettable Average Depth (OSTC MK.2 only) NEW: CF41: Mix Type Icons in Surfacemode (OSTC MK.2 only) NEW: CF49: Show Altimeter in Surfacemode (OSTC MK.2 only) NEW: CF50: Show LogMarker in Divemode/Customview (OSTC MK.2 only) NEW: CF51: Show Stopwatch in Divemode/Customview (OSTC MK.2 only) NEW: CF52: Show Tissue Graph in Divemode/Customview (OSTC MK.2 only) NEW: CF53: Show Leading Tissue in Divemode/Customview (OSTC MK.2 only) NEW: CF39: Adjust fixed SetPoint if Diluent ppO2 > SetPoint (OSTC MK.2 only) BUGFIX: Custom view for Apnoe mode disabled BUGFIX: Custom view for Gauge mode adjusted New in 1.74 Beta: BETA Version - Do NOT use for diving! NEW: Added END (Equivalent narcotic depth) for GasSetup CHANGE: Limits for several Custom Functions (OSTC MK.2 only) BUGFIX: Realtime Simulator menu NEW: Customview for Surfacemode (OSTC MK.2 only) NEW: Icon for Tank mix on Surface screen (OSTC MK.2 only) BUGFIX: Stopwatch Reset New in 1.73 Beta: BETA Version - Do NOT use for diving! NEW: Anti-Alised fonts (OSTC MK.2 only) NEW: Removed CF39 - Clock moved into Customview area (OSTC Mk.2 only) NEW: Custom functions menu more comfortable (OSTC Mk.2 only) BUGFIX: Surface interval now correct for repetitive dives CHANGE: Changes in divemode layout (OSTC Mk.2 only) New in 1.72 Beta: BETA Version - Do NOT use for diving! BUGFIX: TTS display while decoplan is displayed CHANGE: Stopwatch reset is blocked for one second after divemode menu exit (OSTC Mk.2 Only) NEW: Gas list is color-coded in Color# Warnings if ppO2 of gas > CF18 (ppO2 High warning) (OSTC Mk.2 Only)) CHANGE: Exchanged "Gaslist" and "Decoplan" in Divemode menu BUGFIX: ppO2 warning for very high ppO2 levels New in 1.71 Beta: BETA Version - Do NOT use for diving! BUGFIX: Custom text can be 23chars again BUGFIX: Simulator descends to exact depth NEW: Added CF39: =1 shows clock in divemode (OSTC Mk.2 only) BUGFIX: Surface Interval not afffected from Simulator CHANGE: "Decosum" changed to "TTS" (Time to Surface) NEW: Up to 16 Deco Stops are displayed in Divemode and Simulator (GF Modes only) NEW: CF40 added (=1: Ceiling violation displayed in Color# Warnings (OSTC Mk.2 Only)) New in 1.70 Stable: Stable release WARNING: This update will reset all Custom Functions! BUGFIX: Gas Changes for Simulator New in 1.65 Beta: This is the 1.70 Stable release candidate BETA Version - Do NOT use for diving! CHANGE: Restored original Gas Setup CHANGE: CF25 (Deco Debug) default to 0 BUGFIX: Velocity warning (CF47) only for ascend New in 1.63 Beta: BETA Version - Do NOT use for diving! CHANGE: CF15 defines threshold for CNS display in Surfacemode (OSTC MK.2 only) NEW: CF48 sets positive clock offset [seconds/24h], added at Midnight BUGFIX: CNS restored after simulation New in 1.62 Beta: BETA Version - Do NOT use for diving! CHANGE: More space around divemode-menu CHANGE: Disabled "Delete Dive" in logbook CHANGE: Simulated dives are no longer stored in the logbook NEW: Simulator is much faster now NEW: New Simulation results screen BUGFIX: CF Warning displayed in Color# Warnings (OSTC Mk.2 only) NEW: Gas Setup sorts Gaslist NEW: Deco Code uses all Gases for forecast New in 1.61 Beta: BETA Version - Do NOT use for diving! CHANGE: "Better Gas" now blinks more eye catching CHANGE: Battery symbol range changed (OSTC Mk.2 Only) NEW: Added CF37: Color# Warnings (OSTC Mk.2 Only) NEW: Color# = 0,4,8,192,196 and 200 (Black or very dim) is ignored (OSTC Mk.2 Only) BUGFIX: History not updated in Simulator mode BUGFIX: Fixed-Setpoint (minimum) ppO2 limited to physically possible value NEW: Depth, CNS, GF, ppO2 and Velocity are Color-coded (OSTC Mk.2 Only) NEW: CF43: Depth [mbar] for color-code display (OSTC Mk.2 Only) NEW: CF44: CNS [%] for color-code display (OSTC Mk.2 Only) NEW: CF45: GF [%] for color-code display (OSTC Mk.2 Only) NEW: CF46: ppO2 [cbar] for color-code display (OSTC Mk.2 Only) NEW: CF47: Velocity [m/min] for color-code display (OSTC Mk.2 Only) CHANGE: Change of color layout (OSTC Mk.2 Only) New in 1.60 Stable: Stable release New in 1.56 Beta: BETA Version - Do NOT use for diving! BUGFIX: Inactive Gases in Divemode greyed out (OSTC Mk.2 only) NEW: Scale in Tissue Graph (OSTC Mk.2 only) NEW: Leading Tissue percent is displayed in Tissue Graph (OSTC Mk.2 only) NEW: Diluent is shown in Pre-Dive screen for CC modes New in 1.55 Beta: BETA Version - Do NOT use for diving! CHANGE: Greyed out gases more readable CHANGE: Removed "Delete All" from Logbook Menu NEW: CF42=1: Active Gas will blink if a better gas is available CHANGE: Returning from Bailout to CCR mode will not reset diluent gas New in 1.54 Beta: BETA Version - Do NOT use for diving! BUGFIX: Freeze at startup New in 1.53 Beta: BETA Version - Do NOT use for diving! CHANGE: License moved into Menu NEW: Quick power on NEW: Not used O2 Sensors are not shown (OSTC1 only) NEW: O2 Board is automatically selected when found within the 1st second in divemode (OSTC1 only) NEW: Quick-View of Gaslist (Pre-Dive Check), press ENTER in Surfacemode New in 1.52 Beta: BETA Version - Do NOT use for diving! NEW: Fixed-Setpoint ppO2 limited to physically possible value BUGFIX: CF32 was displayed wrong on first call NEW: Gas change recommendation in divemode ('*' after Gas) CHANGE: "Const.ppO2 Setup" renamed to "CCR SetPoint Menu" BUGFIX: CF35 now affects all items in surface and divemode NEW: CF36 sets Divemode mask color (OSTC Mk.2 only) BUGFIX: CF15 removed (OSTC Mk.2 only) New in 1.51 Beta: BETA Version - Do NOT use for diving! BUGFIX: PC Simulator mode NEW: CF35 sets standard color BUGFIX: Display startup at very cold ambient temperatures BUGFIX: Battery voltage accuracy BUGFIX: Temperature accuracy BUGFIX: ppO2 is displayed in Bailout mode New in 1.50 Stable: Initial release for OSTC Mk.2