Mercurial > public > mk2
comparison code_part1/OSTC_code_asm_part1/docu/README.txt @ 192:c8816e4bc724
GF Model
+ Apply the Eric's Baker gradient formula.
+ Apply GF varying corrections for each compartiment.
+ B?hlmann 100/100 == Gradient factor 100/100.
+ Compute stop with gradient at current depth (not GF_low)
+ Add assert() on visual platform.
+ Overflow stop into the next bin at same depth.
+ debug last deco depth in range 3m..6m.
| author | JeanDo |
|---|---|
| date | Fri, 11 Feb 2011 23:39:35 +0100 |
| parents | a08fc66fee28 |
| children | 652e17b6267a |
comparison
equal
deleted
inserted
replaced
| 191:a08fc66fee28 | 192:c8816e4bc724 |
|---|---|
| 60 - On the OSTC, go to the reset menu, select Reboot OSTC | 60 - On the OSTC, go to the reset menu, select Reboot OSTC |
| 61 ==> DO NOT CONFIRM YET ! | 61 ==> DO NOT CONFIRM YET ! |
| 62 | 62 |
| 63 - Click "Write Flash" button. Now you have 10sec to confirm on OSTC too. | 63 - Click "Write Flash" button. Now you have 10sec to confirm on OSTC too. |
| 64 | 64 |
| 65 - The bootloader should say it found a PIC18F6485 device, and start uploading. | 65 - The bootloader should say it found a 18F6485 device, and start uploading. |
| 66 The OSTC should have the blue and red led blinking rapidly. | 66 The OSTC should have the blue and red led blinking rapidly. |
| 67 The upload time is ~ 1 minute. | 67 The upload time is ~ 20 secondes. |
| 68 | 68 |
| 69 - Once done, the OSTC finishes its reboot. | 69 - Once done, the OSTC finishes its reboot. |
| 70 | 70 |
| 71 - If you OSTC is stuck in some bad code, you can do the magic magnet reset | 71 - If you OSTC is stuck in some bad code, you can do the magic magnet reset |
| 72 instead of choosing the reboot menu, during the 10sec timeslot after | 72 instead of choosing the reboot menu, during the 10sec timeslot after |