Mercurial > public > mk2

comparison code_part1/OSTC_code_asm_part1/definitions.asm @ 0:96a35aeda5f2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Initial setup
author heinrichsweikamp
date Tue, 12 Jan 2010 15:05:59 +0100
parents
children d11ef8dc4b2c
comparison
equal deleted inserted replaced
-1:000000000000 0:96a35aeda5f2
1 ; OSTC - diving computer code
2 ; Copyright (C) 2008 HeinrichsWeikamp GbR
3
4 ; This program is free software: you can redistribute it and/or modifyn 3 of the License, or
5 ; (at your option) any later version.
6
7 ; This program is distributed in the hope that it will be useful,
8 ; but WITHOUT ANY WARRANTY; without even the implied warranty of
9 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 ; GNU General Public License for more details.
11
12 ; You should have received a copy of the GNU General Public License
13 ; along with this program. If not, see <http://www.gnu.org/licenses/>.
14
15
16 ; Defines, I/O Ports and variables
17 ; written by: Matthias Heinrichs, info@heinrichsweikamp.com
18 ; written: 10/30/05
19 ; last updated: 01/23/08
20 ; known bugs:
21 ; ToDo:
22
23 ;#DEFINE NO_SENSOR_MODE ; uses Dummy values
24
25 #DEFINE softwareversion_x d'1' ; Software version XX.YY
26 #DEFINE softwareversion_y d'50' ; Software version XX.YY
27
28 #DEFINE max_custom_number d'41' ; Number of last used custom function
29
30 #DEFINE logbook_profile_version 0x20 ; Do not touch!
31
32 #DEFINE T0CON_debounce b'00000000' ; Timer0 Switch Debounce
33
34 #DEFINE FT_SMALL .0
35 #DEFINE FT_MEDIUM .1
36 #DEFINE FT_LARGE .2
37
38 ; Define max. 5 Binary Custom Functions here (add more in menu_custom.asm)
39 #DEFINE binary_cf1 d'31'
40 #DEFINE binary_cf2 d'38'
41 #DEFINE binary_cf3 d'39'
42 #DEFINE binary_cf4 d'40'
43 #DEFINE binary_cf5 d'41'
44
45 #DEFINE wp_fontwidth .14
46 #DEFINE wp_fontheight .24
47
48 ; Color Definitions: 8Bit RGB b'RRRGGGBB'
49 #DEFINE color_red b'11100000'
50 #DEFINE color_blue b'00000011'
51 #DEFINE color_green b'00011100'
52 #DEFINE color_white b'11111111'
53 #DEFINE color_black b'00000000'
54 #DEFINE color_deepblue b'00000001'
55 #DEFINE color_grey d'73'
56
57
58 ;Configuration bits
59 CONFIG OSC = IRCIO67 ;Internal oscillator block, port function on RA6 and RA7
60 CONFIG FCMEN = OFF ;Fail-Safe Clock Monitor disabled
61 CONFIG IESO = OFF ;Oscillator Switchover mode disabled
62
63 CONFIG PWRT = ON ;PWRT enabled
64 CONFIG BOREN = OFF ;Brown-out Reset disabled in hardware and software
65
66 CONFIG WDT = OFF ;WDT disabled
67 CONFIG WDTPS = 128 ;1:128
68
69 CONFIG MCLRE = ON ;MCLR pin enabled; RE3 input pin disabled
70 CONFIG LPT1OSC = OFF ;Timer1 configured for higher power operation
71 CONFIG PBADEN = OFF ;PORTB<4> and PORTB<1:0> Configured as Digital I/O Pins on Reset
72
73 CONFIG DEBUG = OFF ;Background debugger disabled, RB6 and RB7 configured as general purpose I/O pins
74 CONFIG XINST = OFF ;Instruction set extension and Indexed Addressing mode disabled (Legacy mode)
75 CONFIG LVP = OFF ;Single-Supply ICSP disabled
76 CONFIG STVREN = OFF ;Stack full/underflow will not cause Reset
77
78
79 ;Variable definitions
80 ; arrays are in hex size!! 20 = .032
81
82 CBLOCK 0x060 ;Bank 0
83 letter:.026 ;letter buffer
84 win_color1
85 win_color2
86 win_top
87 win_leftx2
88 win_font
89 win_invert
90 wp_temp
91 ENDC
92 ; the following is used by the C-code up to 0x0E0!!
93 CBLOCK 0x0E0 ;Bank 0
94 ENDC
95
96 CBLOCK 0x100 ;Bank 1
97 wreg_temp ;variables used for context saving during ISR
98 status_temp
99 bsr_temp
100
101 secs ;realtime clock
102 mins
103 hours
104 day
105 month
106 year
107
108 waitms_temp ;variables required for wait routines
109 wait_temp ; " + used to copy data to c code + used for temp/testing
110 ; never use wait_temp in interrupt routines (isr) and never call any wait routine in interrupts
111
112 textnumber ;for textdisplay and textlookup
113 textlength
114 textaddress:2
115
116 LastSetRow
117 LastSetColumn
118 average_depth_hold:4 ; Holds Sum of depths
119 b0_lo ; Temp (calculate_average)
120 b0_hi ; Temp (calculate_average)
121 average_divesecs:2 ; Used for resetable average depth display
122 surface_interval:2 ; Surface Interval [mins]
123 grayvalue ; 4 Bit Greyvalue
124
125 draw_box_temp1
126 draw_box_temp2
127 draw_box_temp3
128
129 flag1 ;Flag register
130 flag2
131 flag3
132 flag4
133 flag5 ; has to be exacly here, is modified by c-code (no sensor int)
134 flag6
135 flag7
136 flag8
137 flag9
138 flag10
139 flag11
140 flag12
141 flag13
142 flag14
143 flag15
144
145 oled1_temp ;Temp variables for display output
146 oled2_temp
147 oled3_temp
148 oled4_temp ; Used in "Displaytext"
149
150 lo ;bin to dec conversion routine
151 hi
152 lo_temp
153 hi_temp
154 temp3 ; used in valconv math
155 temp4 ; used in valconv math
156 ignore_digits
157
158 temp1 ;Multipurpose Temp variables used in valconv math
159 temp2 ; used in valconv math
160
161 ext_ee_temp1 ; External EEPROM Temp 1 used in I2C EEPROM
162 ext_ee_temp2 ; External EEPROM Temp 2 used in I2C EEPROM
163
164 isr1_temp ;ISR temp variables
165 isr2_temp
166 isr3_temp:2
167
168 timer1int_counter1 ;Timer 1 counter
169 timer1int_counter2 ;Timer 1 counter
170
171 uart1_temp ;RS232 temp variables
172 uart2_temp
173
174 divA:2 ;math routines
175 divB
176 xC:4
177 xA:2
178 xB:2
179 sub_c:2
180 sub_a:2
181 sub_b:2
182
183 dLSB ;Pressure sensor interface
184 dMSB
185 clock_count
186 temperature_correction ; additional temperature correction value
187 W1:2
188 W2:2
189 W3:2
190 W4:2
191 C1:2
192 C2:2
193 C3:2
194 C3_temp:2
195 C4:2
196 C5:2
197 C6:2
198 D1:2
199 D2:2
200
201 isr_divA:2
202 isr_divB
203 isr_xC:4
204 isr_xA:2
205 isr_xB:2
206 isr_sub_c:2
207 isr_sub_a:2
208 isr_sub_b:2
209
210 xdT:2
211 xdT2:2
212 OFF:2
213 SENS:2
214 amb_pressure:2 ; ambient pressure [mBar]
215 rel_pressure:2 ; amb_pressure - surface pressure [mBar]
216 max_pressure:2 ; Max. pressure for the dive [mBar]
217 avr_rel_pressure:2 ; Average rel. pressure (Average depth) for the dive [mBar]
218 last_pressure:2
219 temperature:2
220 last_temperature:2
221 temperature_temp:2
222 Dx:2
223
224 last_surfpressure:2 ;Divemode
225 last_surfpressure_15min:2
226 last_surfpressure_30min:2
227 divemins:2 ;Minutes
228 divesecs ;seconds
229 samplesecs ; counts the seconds until the next sample is stored in divemode
230 samplesecs_value ; holds the CF20 value
231 decodata:2 ;Deco data
232 mintemp:2 ;min temperature
233 ProfileFlagByte ; stores number of addional bytes per sample
234 EventByte ; Stores the Event type plus flags
235 AlarmType ; 0= No Alarm
236 ; 1= SLOW
237 ; 2= DecoStop missed
238 ; 3= DeepStop missed
239 ; 4= ppO2 Low Warning
240 ; 5= ppO2 High Warning
241 ; 6= manual marker
242
243 divisor_temperature ; divisors for profile storage
244 divisor_deco
245 divisor_tank
246 divisor_ppo2
247 divisor_deco_debug
248 divisor_nuy2
249
250 timeout_counter ;Timeout counter variables
251 timeout_counter2
252 timeout_counter3 ;pre-menu timeout counter
253
254 menupos ;cursor position
255 menupos2
256 menupos3
257
258 eeprom_address:2 ;external EEPROM
259 eeprom_header_address:2
260
261 divenumber ;Logbook
262
263 batt_voltage:2 ;Battery voltage in mV
264
265 i2c_temp ;I²C timeout counter
266 i2c_temp2
267
268 sim_pressure:2 ; hold simulated pressure in mBar if in Simulator mode
269
270 profile_temp:2 ; temp variable for profile view
271 profile_temp2:2 ; temp variable for profile view
272
273 nofly_time:2 ; No Fly time in Minutes (Calculated after Dive)
274
275 deco_status ; =0 if decompression calculation done
276
277 cf_checker_counter ; counts custom functions to check for warning symbol
278
279 char_I_O2_ratio ; 02 ratio
280
281 active_gas ; Holds number of active gas
282
283 last_diluent ; backup of diluent percentage in const ppO2 mode
284 last_cns ; backup of last cns value
285 last_ppO2_value ; last calculated ppO2 value
286
287 ; ontime_since_last_charge:2 ; Ontime in minutes since last complete charge cycle
288 ; sleeptime_since_last_charge:2; Sleeptime in hours since last complete charge
289
290 debug_char:6 ; For debugmode
291 debug_temp ; For debugmode
292
293 apnoe_mins ; single descent minutes for Apnoe mode
294 apnoe_secs ; single descent seconds for Apnoe mode
295 apnoe_max_pressure:2 ; Max. Pressure in Apnoe mode
296 apnoe_timeout_counter ; counts minutes for apnoe timeout
297 apnoe_surface_mins ; Surface interval mins for Apnoe mode
298 apnoe_surface_secs ; Surface interval secs for Apnoe mode
299 customfunction_temp1 ; start of custom function descriptors
300 customfunction_temp2 ; used in GETCUSTOM8 and GETCUSTOM15
301
302 switch_timeout ; used for hold-down count function
303
304 temp5 ; used in PLED_MultiGF,...
305 temp6 ; used in PLED_MultiGF,...
306 char_last_pointer ; for MultiGF
307 MultiGF_seconds ; Counter for seconds in Multi-GF mode
308
309 fatal_error_code ; holds error code value
310
311 logbook_temp1 ; Temp used in logbook display&Divemode
312 logbook_temp2 ; Temp used in logbook display&Divemode
313 logbook_temp3 ; Temp used in logbook display&Divemode
314 logbook_temp4 ; Temp used in logbook display&Divemode
315 logbook_temp5 ; Temp used in logbook display&Divemode
316 logbook_temp6 ; Temp used in logbook display&Divemode
317
318 convert_value_temp:3 ; used in menu_battery_state_convert_date
319 box_temp:5
320 win_color1_temp
321 win_color2_temp ; Backup color registers
322
323 ENDC
324
325 CBLOCK 0x200 ;Bank 2
326 int_O_tissue_for_debug:.32 ; deco_main_debug copies pressure of tissue to this variable
327 int_O_GF_spare____:2; // 0x240
328 int_O_GF_step:2; // 0x242
329 int_O_gtissue_limit:2; // 0x244
330 int_O_gtissue_press:2; // 0x246
331 int_O_limit_GF_low:2; // 0x248
332 int_O_gtissue_press_at_GF_low:2; // 0x24A
333 ENDC
334 CBLOCK 0x24E ;Bank 2
335 char_O_GF_low_pointer; // 0x24E
336 char_O_actual_pointer; // 0x24F
337 ENDC
338 CBLOCK 0x250 ;Bank 2
339 char_IO_deco_table:.32; // 0x250
340 ENDC
341 CBLOCK 0x270 ;Bank 2
342 char_I_table_deco_done:.32; // 0x270
343 ENDC
344 CBLOCK 0x290 ;Bank 2
345 int_O_calc_tissue_call_counter:2
346 ENDC
347 CBLOCK 0x380 ;Bank 3
348 ; some used in C code!
349 ENDC
350
351 CBLOCK 0x500
352 ; used by deco_main c-code for data transfer with the asm code
353 ; input of c-code
354 int_I_pres_respiration:2; ; 0x500
355 int_I_pres_surface:2; ; 0x502
356 int_I_temp:2; ; 0x504
357 char_I_temp; ; 0x506
358 char_I_actual_ppO2; ; 0x507
359 int_I_spare_3:2;
360 int_I_spare_4:2;
361 int_I_spare_5:2;
362 int_I_spare_6:2;
363 char_I_N2_ratio; ; 0x510
364 char_I_He_ratio; ; 0x511
365 char_I_saturation_multiplier; ; for conservatism/safety values 1.0 (no conservatism) to 1.5 (50% faster saturation
366 char_I_desaturation_multiplier; ; for conservatism/safety values 0.66 (50% slower desaturation) to 1.0 (no conservatism); consveratism used in calc_tissue(), calc_tissue_step_1_min() and sim_tissue_1min()
367 char_I_GF_Hi_percentage; ; 0x514
368 char_I_GF_Lo_percentage; ; 0x515
369 char_I_GF_Spare; ; 0x516
370 char_I_deco_distance; ; 0x517
371 char_I_const_ppO2; ; 0x518 new in v.101 (C-Code), new in v109 (asm)
372 char_I_deco_ppO2_change; ; 0x519 new in v.101
373 char_I_deco_ppO2; ; 0x51A new in v.101
374 char_I_deco_gas_change; ; 0x51B new in v.101
375 char_I_deco_N2_ratio; ; 0x51C new in v.101
376 char_I_deco_He_ratio; ; 0x51D new in v.101
377 char_I_depth_last_deco; ; 0x51E new in v.101
378 char_I_deco_model; ; 0x51F new in v.102
379 ; output of c-code:
380 int_O_desaturation_time:2; ; 0x520
381 char_O_nullzeit; ; 0x522
382 char_O_deco_status; ; 0x523
383 char_O_array_decotime:7; ; 0x524
384 char_O_array_decodepth:6; ; 0x52B
385 char_O_ascenttime; ; 0x531
386 char_O_gradient_factor; ; 0x532
387 char_O_tissue_saturation:.32; ; 0x533, He starts at 0x543
388 char_O_array_gradient_weighted:.16 ; 0x553
389 char_O_gtissue_no; ; 0x563
390 char_O_diluent; ; 0x564 new in v.101 (C-Code), new in v109 (asm)
391 char_O_CNS_fraction; ; 0x565 new in v.101
392 char_O_relative_gradient_GF; ; 0x566 new in v.102
393
394 ENDC
395
396 CBLOCK 0x700 ;Bank 7
397 ; variables used exclusively in dd:
398 dd_temp_BSR ; has to be first in bank7
399 temp_pointer_row
400 temp_pointer_column
401 temp2_pointer_row
402 temp2_pointer_column
403 temp_selected_char
404 temp_font_HIGH
405 temp_font_LOW
406 temp_font_height
407 temp2_font_height
408 temp_font_width
409 temp2_font_width
410 temp_diff_font_width
411 temp2_diff_font_width
412 temp_font_offset_left
413 temp_font_offset_right
414 temp_pos
415 DDflag
416 dd_oled_brightness_offset ; value will be subtracted from "dd_grayvalue" in dd_font2display_vxxx.asm
417 dd_grayvalue
418 dd2_temp
419 dd3_temp
420 dd_pos_decpoint
421 dd_grayvalue_temp
422 dd_grayvalue_temp2
423 ENDC
424
425 CBLOCK 0x94A ;Bank 9
426 char_O_hash:.16 ; MD2 hash values = d'16'
427 ENDC
428
429
430 ; C-code Routines
431 ; PART 3
432 ;#DEFINE main_wordprocessor 0x0B410
433 #DEFINE main_wordprocessor 0x0B468
434
435 ; C-code Routines
436 ; PART 2
437 #DEFINE deco_main_calc_hauptroutine 0x10000
438 #DEFINE deco_main_calc_without_deco 0x10020
439 #DEFINE main_clear_CNS_fraction 0x10030
440 #DEFINE main_calc_CNS_decrease_15min 0x10034
441 #DEFINE main_calc_percentage 0x10038
442 #DEFINE deco_main_clear_tissue 0x10040
443 #DEFINE main_calc_CNS_fraction 0x10050
444 #DEFINE deco_main_calc_desaturation_time 0x10060
445 #DEFINE deco_main_calc_wo_deco_step_1_m 0x10080
446 #DEFINE deco_main_debug 0x100A0
447 #DEFINE main_DD2_write_incon42 0x100B0
448 #DEFINE main_DD2_write_incon24 0x100B4
449
450 #DEFINE deco_main_gradient_array 0x100C0
451 #DEFINE deco_main_hash 0x100E0
452 #DEFINE main_push_tissues_to_vault 0x100C4
453 #DEFINE main_pull_tissues_from_vault 0x100C8
454
455 ;I/O Ports (I=Input, O=Output)
456 #DEFINE sensor_SDO PORTA,1 ;O
457 #DEFINE oled_rw PORTA,2 ;0
458 #DEFINE oled_hv PORTA,3 ;O
459 #DEFINE sensor_SDI PORTA,4 ;I
460 #DEFINE oled_cs PORTA,5 ;O
461 #DEFINE sensor_CLK PORTA,7 ;O
462
463 #DEFINE SWITCH2 PORTB,0 ;I (Right)
464 #DEFINE SWITCH1 PORTB,1 ;I (Left)
465 #DEFINE oled_vdd PORTB,2 ;O
466 #DEFINE LED_blue PORTB,3 ;0
467 #DEFINE LED_red PORTB,4 ;O
468
469 #DEFINE CHRG_OUT PORTC,1 ;O
470 #DEFINE CHRG_IN PORTC,2 ;I
471
472 #DEFINE oled_d1 PORTD,0 ;O
473 #DEFINE oled_d2 PORTD,1 ;O
474 #DEFINE oled_d3 PORTD,2 ;O
475 #DEFINE oled_d4 PORTD,3 ;O
476 #DEFINE oled_d5 PORTD,4 ;O
477 #DEFINE oled_d6 PORTD,5 ;O
478 #DEFINE oled_d7 PORTD,6 ;O
479 #DEFINE oled_d8 PORTD,7 ;O
480
481 #DEFINE oled_rs PORTE,0 ;0
482 #DEFINE oled_nreset PORTE,1 ;0
483 #DEFINE oled_e_nwr PORTE,2 ;0
484
485 ; Flags
486 #DEFINE FLAG_scale flag1,0 ; Wordprocessor
487 #DEFINE FLAG_truncated flag1,1 ; Wordprocessor
488 #DEFINE pre_zero_flag flag1,2 ; leading zeros
489 #DEFINE neg_flag flag1,3 ; e.g. Sub_16 (sub_c = sub_a - sub_b)
490 #DEFINE FLAG_row_prime flag1,4 ; Wordproceesor
491 #DEFINE leading_zeros flag1,5 ; display leading zeros?
492 #DEFINE show_last3 flag1,6 ; show only three figures
493 #DEFINE leftbind flag1,7 ; leftbinded output
494
495 #DEFINE onesecupdate flag2,0 ;=1 after any second
496 #DEFINE divemode flag2,1 ;=1 if in divemode
497 #DEFINE oneminupdate flag2,2 ;=1 after any minute
498 #DEFINE realdive flag2,3 ; dive was longer then one minute?
499 #DEFINE sleepmode flag2,4 ;=1 if in sleepmode
500 #DEFINE same_row flag2,5 ;=1 if pixel pair is in same row (display_profile)
501 #DEFINE premenu flag2,6 ; Premenu/Divemenu selected
502 #DEFINE menubit flag2,7 ; menu
503
504 #DEFINE menubit2 flag3,0 ; menu
505 #DEFINE menubit3 flag3,1 ; menu
506 #DEFINE set_minutes flag3,2 ; set minutes (not hours)
507 #DEFINE cursor flag3,3 ; display cursor
508 #DEFINE menubit4 flag3,4 ; quit set time
509 #DEFINE display_velocity flag3,5 ; velocity is displayed
510 #DEFINE temp_changed flag3,6 ; temperature changed
511 #DEFINE pres_changed flag3,7 ; pressure changed
512
513 #DEFINE set_year flag4,0 ; Menu Settime
514 #DEFINE set_day flag4,1 ; Menu Settime
515 #DEFINE set_month flag4,2 ; Menu Settime
516 #DEFINE store_sample flag4,3 ;=1 after any CF20 seconds in divemode
517 #DEFINE divemode2 flag4,4 ; displayed divetime stopped?
518 #DEFINE header_stored flag4,5 ; header already stored
519 #DEFINE first_FD flag4,6 ; 1st 0xFD in EEPROM found
520 #DEFINE first_FA flag4,6 ; 1st 0xFA in EEPROM found
521 #DEFINE second_FD flag4,7 ; 2nd 0xFD in EEPROM found
522 #DEFINE second_FA flag4,7 ; 2nd 0xFA in EEPROM found
523
524 #DEfINE eeprom_overflow flag5,0 ; EEPROM overflowed (>32KB)
525 #DEFINE eeprom_blockwrite flag5,1 ; EEPROM blockwrite active
526 #DEFINE neg_flag_xdT flag5,2 ; xdT negative (2nd order temperature calculation)
527 #DEFINE low_battery_state flag5,3 ;=1 if battery low
528 #DEFINE DP_done flag5,4 ; valconv
529 #DEFINE DP_done2 flag5,5 ; valconv
530 #DEFINE pressure_refresh flag5,6 ; Pressure and temperature refreshed
531 #DEFINE no_sensor_int flag5,7 ; block any further access to pressure sensor
532
533 #DEFINE cc_active flag6,0 ;=1: Constant Current mode aktive (Charger)
534 #DEFINE cv_active flag6,1 ;=1: Constant Voltage mode aktive (Charger)
535 #DEFINE ignore_digit5 flag6,2 ;=1: ignores digit 5 in valconv
536 #DEFINE switch_left flag6,3 ;=1: left switch pressed
537 #DEFINE switch_right flag6,4 ;=1: right switch pressed
538 #DEFINE uart_settime flag6,5 ;=1: enter time sync routine
539 #DEFINE neg_temp flag6,6 ;=1: temperature below zero
540 #DEFINE twosecupdate flag6,7 ;=1: after any two seconds
541
542 #DEFINE dekostop_active flag7,0 ;=1: in deocompression mode
543 #DEFINE all_dives_shown flag7,1 ;=1: all dives in loogbook shown, abort further scanning
544 #DEFINE return_from_profileview flag7,2 ;=1: set cursor to same position again
545 #DEFINE logbook_profile_view flag7,3 ;=1: Show details/profile in logbook
546 #DEFINE logbook_page_not_empty flag7,4 ;=1: actual logbook page is not empty
547 #DEFINE dump_external_eeprom flag7,5 ;=1: enter download-routine
548 #DEFINE simulatormode_active flag7,6 ;=1: Simulator mode active, override pressure sensor readings
549 #DEFINE all_zeros_flag flag7,7 ;=1: display all zeros from here (valconv_v2.asm)
550
551 #DEFINE internal_eeprom_write flag8,0 ;=1: start routine to access internal EEPROM BANK 0 via the UART
552 #DEFINE update_divetime flag8,1 ;=1: update divetime display
553 #DEFINE display_set_xgas flag8,2 ;=1: Display Set Gas menu in Divemode
554 #DEFINE FLAG_active_descent flag8,3 ;=1: A Descent in Apnoe mode is active
555 #DEFINE display_see_deco flag8,4 ;=1: Display decoplan in Divemode
556 #DEFINE display_set_gas flag8,5 ;=1: Display Gaslist menu in Divemode
557 #DEFINE display_set_graphs flag8,6 ;=1: Display "Display Menu" in Divemode
558 #DEFINE rs232_recieve_overflow flag8,7 ;=1: An RS232 timeout overflow occoured
559
560 #DEFINE nofly_active flag9,0 ;=1: Do not fly!
561 #DEFINE ppO2_display_active flag9,1 ;=1: ppO2 value is displayed
562 #DEFINE ppO2_show_value flag9,2 ;=1: show ppO2 value!
563 #DEFINE show_startup_screen flag9,3 ;=1: Show startup screen with MD2 hash
564 #DEFINE ignore_digit3 flag9,4 ;=1: ignores digits 3-5 in valconv
565 #DEFINE ppO2_warn_value flag9,5 ;=1: warn about ppO2!
566 #DEFINE output_to_postinc_only flag9,6 ;=1: Do not call wordprocessor in output
567 #DEFINE uart_send_hash flag9,7 ;=1: Send the MD2 hash via UART
568
569 #DEFINE uart_compensate_temp flag10,0 ;=1: Enter Temperature compensation routine
570 #DEFINE uart_send_int_eeprom flag10,1 ;=1: Send internal EEPROM BANK 0
571 #DEFINE uart_reset_decodata flag10,2 ;=1: Reset deco data
572 #DEFINE manual_gas_changed flag10,3 ;=1: Manual Gas changed during dive
573 #DEFINE stored_gas_changed flag10,4 ;=1: Stored Gas changed during dive
574 #DEFINE event_occured flag10,5 ;=1: An Event has occured during the current sample interval
575 #DEFINE new_profile_format flag10,6 ;=1: Current Dive in Logbook uses new ProfileFormat
576 #DEFINE gauge_mode flag10,7 ;=1: Gauge mode active
577
578 #DEFINE FLAG_const_ppO2_mode flag11,0 ;=1: const ppO2 mode active
579 #DEFINE gas_setup_page2 flag11,1 ;=1: page two of gassetup active
580 #DEFINE logbook_header_drawn flag11,2 ;=1: The "Logbook" Header in the List view is already drawn
581 #DEFINE ignore_digit4 flag11,3 ;=1: Ignores digits 4-5 in valconv
582 #DEFINE charge_done flag11,4 ;=1: Complete charge cycle done
583 #DEFINE initialize_battery1 flag11,5 ;=1: Battery memory need to be initialised
584 #DEFINE initialize_battery2 flag11,6 ;=1: Battery memory need to be initialised
585 #DEFINE charge_started flag11,7 ;=1: Charger started in CC mode
586
587 #DEFINE switch_left_isr flag12,0 ;=1: left switch pressed (Only modified in ISR!)
588 #DEFINE switch_right_isr flag12,1 ;=1: right switch pressed (Only modified in ISR!)
589 #DEFINE debug_mode flag12,2 ;=1: Debugmode active
590 #DEFINE neg_flag_isr flag12,3 ;=1: ISR Negative flag (Math)
591 #DEFINE select_bailoutgas flag12,4 ;=1: Select Bailout instead of Setpoint in Gaslist
592 #DEFINE FLAG_apnoe_mode flag12,5 ;=1: Apnoe mode selected
593 #DEFINE customfunction_page flag12,6 ;=1: Use 2nd Page of Custom Functions
594 #DEFINE uart_send_int_eeprom2 flag12,7 ;=1: Send internal EEPROM BANK 1
595
596 #DEFINE internal_eeprom_write2 flag13,0 ;=1: start routine to access internal EEPROM BANK 1 via the UART
597 #DEFINE button_delay_done flag13,1 ;=1: Button was pressed for more then 500ms, start counting
598 #DEFINE multi_gf_display flag13,2 ;=1: Display the Multi-GF screen instead of normal divemode screen
599 #DEFINE deco_mode_changed flag13,3 ;=1: The Decomode was changes, show decomode description!
600 #DEFINE pled_velocity_display flag13,4 ;=1: Velocity is displayed
601 #DEFINE depth_greater_100m flag13,5 ;=1: Depth is greater then 100m
602 #DEFINE display_set_setpoint flag13,6 ;=1: SetPoint list active
603 #DEFINE divemode_menu_page flag13,7 ;=1: Use 2nd Page of Divemode Menu
604
605 #DEFINE enter_error_sleep flag14,0 ;=1: Sleep immediately displaying the error using LED codes
606 #DEFINE stopwatch_active flag14,1 ;=1: Show Stopwatch in Divemode
607 ;free
608 #DEFINE standalone_simulator flag14,3 ;=1: Standalone Simulator active
609 #DEFINE display_set_simulator flag14,4 ;=1: Show Divemode simulator menu
610 #DEFINE displaytext_high flag14,5 ;=1: Show/Use Texts 255-511 in Texttable
611 ;free
612 #DEFINE displaytext_invert flag14,7 ;=1: inverts word prozessor output
613
614 #DEFINE restore_deco_data flag15,0 ;=1: Restore Decodata after the dive from 0x380 buffer
615 #DEFINE uart_store_tissue_data flag15,1 ;=1: Store tissue data for next simualted dive!
616 ;free
617 #DEFINE flip_display flag15,3 ;=1: Flip Display
618 #DEFINE display_see_l_tissue flag15,4 ;=1: Leading Tissue details are now displayed
619 ;free
620 ;free
621 #DEFINE show_interval flag15,7 ;=1: Show Interval, =0: Show Clock in Surfacemode
622