Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/simulator.asm @ 197:f15e804ff67f
Gas switch delay
+ New CF#55 for additional delay in decoplan for gas switch.
+ BUGFIX compute integration at full ascent, not half (or the formula is wrong).
+ BUGFIX minor typo in 2sec exposition factors.
| author | JeanDo |
|---|---|
| date | Sun, 13 Feb 2011 17:27:43 +0100 |
| parents | 016c45a0caaf |
| children | 0a3ca358c684 |
| rev | line source |
|---|---|
| 0 | 1 |
| 2 ; OSTC - diving computer code | |
| 3 ; Copyright (C) 2008 HeinrichsWeikamp GbR | |
| 4 | |
| 5 ; This program is free software: you can redistribute it and/or modify | |
| 6 ; it under the terms of the GNU General Public License as published by | |
| 7 ; the Free Software Foundation, either version 3 of the License, or | |
| 8 ; (at your option) any later version. | |
| 9 | |
| 10 ; This program is distributed in the hope that it will be useful, | |
| 11 ; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 ; GNU General Public License for more details. | |
| 14 | |
| 15 ; You should have received a copy of the GNU General Public License | |
| 16 ; along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 17 | |
| 18 | |
| 19 ; menu "Simulator" | |
| 20 ; written by: Matthias Heinrichs, info@heinrichsweikamp.com | |
| 21 ; written: 081210 | |
| 22 ; last updated: 081210 | |
| 23 ; known bugs: | |
| 24 ; ToDo: | |
| 25 | |
| 26 menu_simulator: | |
| 27 movlw d'1' | |
| 28 movwf logbook_temp1 ; Bottom time | |
| 29 movlw d'15' | |
| 30 movwf logbook_temp2 ; Max. Depth | |
| 31 movlw d'1' | |
| 32 movwf menupos | |
| 33 | |
| 34 menu_simulator1: | |
| 35 clrf timeout_counter2 | |
| 36 bsf menubit | |
| 37 bsf cursor | |
| 49 | 38 call PLED_brightness_full ;max. brightness |
| 0 | 39 call PLED_ClearScreen |
| 40 call PLED_simulator_mask | |
| 41 | |
| 42 menu_simulator2: | |
| 43 bcf switch_left | |
| 44 bcf switch_right | |
| 45 bcf menubit2 | |
| 46 bcf menubit3 | |
| 47 call PLED_simulator_data | |
| 48 call PLED_menu_cursor | |
| 49 | |
| 50 menu_simulator_loop: | |
| 51 call check_switches_menu | |
| 52 menu_simulator_loop2: | |
| 53 btfss onesecupdate | |
| 54 bra menu_simulator_loop3 | |
| 55 | |
| 56 call timeout_surfmode | |
| 57 call set_dive_modes | |
| 58 call test_charger ; check if charger IC is active | |
| 59 call get_battery_voltage ; get battery voltage | |
| 60 | |
| 61 bcf onesecupdate ; End of one second tasks | |
| 62 | |
| 63 menu_simulator_loop3: | |
| 64 btfsc menubit2 | |
| 65 goto menu_simulator_do ; call submenu | |
| 66 | |
| 67 btfss menubit | |
| 35 | 68 goto menu_simulator_exit |
| 0 | 69 |
| 70 btfsc sleepmode | |
| 35 | 71 goto menu_simulator_exit |
| 0 | 72 |
| 73 btfsc divemode | |
| 74 goto restart ; exit menu, restart and enter divemode | |
| 75 | |
| 76 bra menu_simulator_loop | |
| 77 | |
| 78 menu_simulator_do: ; calls submenu | |
| 79 dcfsnz menupos,F | |
| 80 bra simulator_startdive | |
| 81 dcfsnz menupos,F | |
| 82 bra simulator_inc_bottomtime | |
| 83 dcfsnz menupos,F | |
| 84 bra simulator_inc_maxdepth | |
| 85 dcfsnz menupos,F | |
| 86 bra simulator_calc_deco | |
| 87 dcfsnz menupos,F | |
| 88 bra simulator_show_decoplan | |
| 35 | 89 menu_simulator_exit: |
| 0 | 90 movlw d'4' |
| 91 movwf menupos | |
| 92 goto more_menu2 ; exit... | |
| 93 | |
| 94 simulator_inc_bottomtime: | |
| 95 movlw d'2' | |
| 96 addwf logbook_temp1,F ; Here: Bottomtime in m | |
| 97 movlw d'199' | |
| 98 cpfslt logbook_temp1 | |
| 99 movwf logbook_temp1 | |
| 100 movlw d'2' | |
| 101 movwf menupos | |
| 102 bra menu_simulator2 | |
| 103 | |
| 104 simulator_inc_maxdepth: | |
| 105 movlw d'3' | |
| 106 addwf logbook_temp2,F ; Here: Maxdepth in m | |
| 107 movlw d'99' | |
| 108 cpfslt logbook_temp2 | |
| 109 movwf logbook_temp2 | |
| 110 movlw d'3' | |
| 111 movwf menupos | |
| 112 bra menu_simulator2 | |
| 113 | |
| 114 simulator_startdive: | |
| 33 | 115 ; Descent to -15m depth |
| 0 | 116 ; Set standalone_simulator flag (Displays Simulator menu during simulation by pressing ENTER button) |
| 117 ; Clear standalone_simulator after (any) dive | |
| 118 bsf simulatormode_active ; normal simulator mode | |
| 119 bsf standalone_simulator ; Standalone Simulator active | |
| 120 | |
| 121 movff logbook_temp2,xA+0 | |
| 122 clrf xA+1 | |
| 123 movlw d'100' | |
| 124 movwf xB+0 | |
| 125 clrf xB+1 | |
| 126 call mult16x16 ;xA*xB=xC ; Depth in m*100 | |
| 127 | |
| 62 | 128 movlw LOW d'1000' |
| 0 | 129 addwf xC+0,F |
| 62 | 130 movlw HIGH d'1000' |
| 131 addwfc xC+1,F ; add 1000mBar | |
| 132 | |
| 133 ; movf amb_pressure+0,W | |
| 134 ; addwf xC+0,F | |
| 135 ; movf amb_pressure+1,W | |
| 136 ; addwfc xC+1,F ; Add ambient pressure | |
| 137 ; | |
| 0 | 138 movff xC+0,sim_pressure+0 |
| 139 movff xC+1,sim_pressure+1 | |
| 140 | |
| 141 movff sim_pressure+0,amb_pressure+0 ; override readings with simulator values | |
| 142 movff sim_pressure+1,amb_pressure+1 | |
| 143 | |
| 144 bcf menubit2 | |
| 145 bcf menubit3 | |
| 146 bcf menubit | |
| 147 bcf switch_left | |
| 148 bcf switch_right | |
| 149 | |
| 150 call simulator_save_tissue_data ; Stores 32 floats "pre_tissue" into bank3 | |
| 151 | |
| 152 bsf divemode ; Set divemode flag | |
| 153 ostc_debug 'P' ; Sends debug-information to screen if debugmode active | |
| 154 goto diveloop ; Start Divemode | |
| 155 | |
| 156 simulator_show_decoplan: | |
| 124 | 157 call PLED_ClearScreen |
| 158 call PLED_simdata_screen | |
| 159 call divemenu_see_decoplan | |
| 160 | |
| 184 | 161 WIN_LEFT .0 |
| 162 call PLED_standard_color | |
| 163 | |
| 124 | 164 ; Display TTS, if any... |
| 168 | 165 movff int_O_ascenttime+0,lo |
| 166 movff int_O_ascenttime+1,hi | |
| 167 movf lo,W | |
| 168 iorwf hi,W | |
| 124 | 169 bz simulator_decoplan_notts |
| 184 | 170 |
| 124 | 171 WIN_TOP .160 |
| 184 | 172 lfsr FSR2, letter |
| 173 OUTPUTTEXT .85 ; TTS (for translation). | |
| 174 STRCAT ": " | |
| 175 bsf leftbind | |
| 176 output_16 | |
| 177 STRCAT_PRINT "'" | |
| 178 | |
| 179 simulator_decoplan_notts: | |
| 180 movff int_I_pres_surface+0,lo | |
| 181 movff int_I_pres_surface+1,hi | |
| 182 | |
| 183 WIN_TOP .190 ; Print Pamb used for compute | |
| 184 lfsr FSR2, letter | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
185 bsf leftbind |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
186 output_16 |
| 124 | 187 bcf leftbind |
| 184 | 188 STRCAT_PRINT " mbar" |
| 124 | 189 |
| 190 WIN_INVERT .1 ; Init new Wordprocessor | |
| 191 DISPLAYTEXT .188 ; Sim. Results: | |
| 192 WIN_INVERT .0 ; Init new Wordprocessor | |
| 34 | 193 |
| 64 | 194 simulator_show_decoplan1: |
| 0 | 195 bcf switch_left |
| 196 bcf switch_right | |
| 197 simulator_show_decoplan2: | |
| 198 btfss onesecupdate | |
| 199 bra simulator_show_decoplan3 | |
| 200 | |
| 201 call timeout_surfmode | |
| 202 call set_dive_modes | |
| 203 call test_charger ; check if charger IC is active | |
| 204 call get_battery_voltage ; get battery voltage | |
| 205 | |
| 206 bcf onesecupdate ; End of one second tasks | |
| 207 | |
| 208 simulator_show_decoplan3: | |
| 64 | 209 btfsc switch_right |
| 0 | 210 bra simulator_show_decoplan4 ; Quit display |
| 211 | |
| 64 | 212 btfsc switch_left |
| 213 bra simulator_show_decoplan5 ; Quit display or new Decoplan-Page (GF Mode only) | |
| 0 | 214 |
| 215 btfsc sleepmode | |
| 216 goto more_menu | |
| 217 | |
| 218 btfsc divemode | |
| 219 goto restart ; exit menu, restart and enter divemode | |
| 220 | |
| 221 bra simulator_show_decoplan2 | |
| 222 | |
| 64 | 223 simulator_show_decoplan5: |
| 124 | 224 incf decoplan_page,F |
| 64 | 225 btfsc last_ceiling_gf_shown ; last ceiling shown? |
| 226 bra simulator_show_decoplan5_0 ; All done, clear and return | |
| 227 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
228 call PLED_decoplan ; Re-Draw Current page of GF Decoplan |
| 64 | 229 bra simulator_show_decoplan1 |
| 230 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
231 simulator_show_decoplan5_0: |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
232 bcf display_see_deco ; clear flag |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
233 bra simulator_show_decoplan4 ; Quit |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
234 |
| 0 | 235 simulator_show_decoplan4: |
| 236 movlw d'5' | |
| 237 movwf menupos | |
| 238 bra menu_simulator1 | |
| 239 | |
| 240 | |
| 241 simulator_calc_deco: | |
| 242 call diveloop_boot ; configure gases, etc. | |
| 243 | |
| 244 bsf simulatormode_active ; normal simulator mode | |
| 245 bsf standalone_simulator ; Standalone Simulator active | |
| 246 | |
| 159 | 247 movff logbook_temp1,logbook_temp3 ; store bottom time |
| 0 | 248 |
| 197 | 249 movff logbook_temp2,xA+0 ; Bottom depth. |
| 0 | 250 clrf xA+1 |
| 251 movlw d'100' | |
| 252 movwf xB+0 | |
| 253 clrf xB+1 | |
| 254 call mult16x16 ;xA*xB=xC ; Depth in m*100 | |
| 255 | |
| 62 | 256 movlw LOW d'1000' |
| 0 | 257 addwf xC+0,F |
| 62 | 258 movlw HIGH d'1000' |
| 259 addwfc xC+1,F ; add 1000mBar | |
| 260 | |
| 0 | 261 movff xC+0,sim_pressure+0 |
| 262 movff xC+1,sim_pressure+1 | |
| 263 | |
| 264 movff sim_pressure+0,amb_pressure+0 ; override readings with simulator values | |
| 265 movff sim_pressure+1,amb_pressure+1 | |
| 266 | |
| 197 | 267 call simulator_save_tissue_data ; Stores 32 floats "pre_tissue" into bank3 |
| 0 | 268 |
| 124 | 269 call PLED_topline_box |
| 0 | 270 WIN_INVERT .1 |
| 197 | 271 DISPLAYTEXT .12 ; "Wait..." |
| 0 | 272 WIN_INVERT .0 |
| 273 | |
| 197 | 274 call divemode_check_decogases ; Checks for decogases and sets the gases |
| 275 call divemode_prepare_flags_for_deco | |
| 276 movlw d'0' ; Begin of deco cycle (init sim tissues) | |
| 277 movff WREG,char_O_deco_status ; Reset Deco module. | |
| 278 | |
| 0 | 279 simulator_calc_deco_loop1: |
| 197 | 280 call deco_calc_hauptroutine ; calc_tissue |
| 281 movlb b'00000001' ; rambank 1 selected | |
| 32 | 282 |
| 124 | 283 movff char_O_deco_status,WREG |
| 284 tstfsz WREG ; deco_status=0 if decompression calculation done | |
| 197 | 285 bra simulator_calc_deco_loop1 ; Not finished |
| 0 | 286 |
| 31 | 287 movlw d'1' |
| 197 | 288 movff WREG,char_I_step_is_1min ; 1 minute mode |
| 32 | 289 |
| 290 simulator_calc_deco_loop2: | |
| 291 call PLED_simulator_data | |
| 197 | 292 btg LED_red |
| 32 | 293 |
| 197 | 294 call divemode_check_decogases ; Checks for decogases and sets the gases |
| 0 | 295 call divemode_prepare_flags_for_deco |
| 296 | |
| 116 | 297 call deco_calc_hauptroutine ; calc_tissue |
| 197 | 298 movlb b'00000001' ; rambank 1 selected |
| 299 ostc_debug 'C' ; Sends debug-information to screen if debugmode active | |
| 300 | |
| 301 decfsz logbook_temp1,F ; Decrement bottom time. | |
| 302 bra simulator_calc_deco_loop2 | |
| 32 | 303 |
| 304 movlw d'0' | |
| 197 | 305 movff WREG,char_I_step_is_1min ; 2 second deco mode |
| 306 | |
| 307 simulator_calc_deco2: | |
| 308 call divemode_check_decogases ; Checks for decogases and sets the gases | |
| 309 call divemode_prepare_flags_for_deco | |
| 32 | 310 |
| 197 | 311 call deco_calc_hauptroutine ; calc_tissue |
| 312 movlb b'00000001' ; rambank 1 selected | |
| 0 | 313 |
| 197 | 314 movff char_O_deco_status,WREG |
| 315 tstfsz WREG ; deco_status=0 if decompression calculation done | |
| 316 bra simulator_calc_deco2 ; Not finished | |
| 0 | 317 |
| 197 | 318 ; Finished |
| 21 | 319 bsf LED_red |
| 0 | 320 |
| 321 call simulator_restore_tissue_data ; Restore 32 floats "pre_tissue" from bank3 | |
| 322 | |
| 197 | 323 bcf simulatormode_active ; normal simulator mode |
| 324 bcf standalone_simulator ; Standalone Simulator active | |
| 0 | 325 |
| 326 WAITMS d'250' | |
| 327 WAITMS d'250' | |
| 197 | 328 WAITMS d'250' ; Wait for Pressure Sensor to get real pressure again... |
| 0 | 329 |
| 197 | 330 bcf LED_red |
| 0 | 331 |
| 332 movlw d'1' | |
| 197 | 333 movwf logbook_temp1 ; Bottom time>0! |
| 0 | 334 |
| 197 | 335 movlw d'5' ; Pre-Set Cursor to "Show Decoplan" |
| 336 movwf menupos | |
| 337 movff logbook_temp3,logbook_temp1 ; restore bottom time | |
| 338 bra menu_simulator1 ; Done. | |
| 49 | 339 |
| 340 | |
| 341 simulator_save_tissue_data: | |
| 342 bsf restore_deco_data ; Set restore flag | |
| 343 ostc_debug 'S' ; Sends debug-information to screen if debugmode active | |
| 116 | 344 call deco_push_tissues_to_vault |
| 49 | 345 movlb 0x01 ; Back to RAM Bank1 |
| 346 ostc_debug 'T' ; Sends debug-information to screen if debugmode active | |
| 347 return | |
| 348 | |
| 349 simulator_restore_tissue_data: | |
| 350 bcf restore_deco_data ; clear restore flag | |
| 351 ostc_debug 'S' ; Sends debug-information to screen if debugmode active | |
| 116 | 352 call deco_pull_tissues_from_vault |
| 49 | 353 movlb 0x01 ; Back to RAM Bank1 |
| 354 ostc_debug 'T' ; Sends debug-information to screen if debugmode active | |
| 355 | |
| 356 ostc_debug 'G' ; Sends debug-information to screen if debugmode active | |
| 116 | 357 call deco_calc_desaturation_time ; calculate desaturation time |
| 49 | 358 movlb b'00000001' ; select ram bank 1 |
| 359 call calculate_noflytime ; Calc NoFly time | |
| 360 ostc_debug 'H' ; Sends debug-information to screen if debugmode active | |
| 361 | |
| 362 ; Calculate CNS | |
| 116 | 363 call deco_calc_CNS_fraction ; calculate CNS |
| 49 | 364 movlb b'00000001' ; rambank 1 selected |
| 365 return |