Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/start.asm @ 411:e6e1b89b7c3e
BUGFIX: CNS was not cleared with a "Reset Deco"
| author | heinrichsweikamp |
|---|---|
| date | Tue, 12 Jul 2011 20:21:57 +0200 |
| parents | 392c14a1d6d1 |
| children | b2c9cc018671 |
| rev | line source |
|---|---|
| 0 | 1 ; OSTC - diving computer code |
| 2 ; Copyright (C) 2008 HeinrichsWeikamp GbR | |
| 3 | |
| 4 ; This program is free software: you can redistribute it and/or modify | |
| 5 ; it under the terms of the GNU General Public License as published by | |
| 6 ; the Free Software Foundation, either version 3 of the License, or | |
| 7 ; (at your option) any later version. | |
| 8 | |
| 9 ; This program is distributed in the hope that it will be useful, | |
| 10 ; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 11 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 12 ; GNU General Public License for more details. | |
| 13 | |
| 14 ; You should have received a copy of the GNU General Public License | |
| 15 ; along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 16 | |
| 17 | |
| 18 ; Start and init | |
| 19 ; written by: Matthias Heinrichs, info@heinrichsweikamp.com | |
| 20 ; written: 10/13/04 | |
| 21 ; last updated: 06/24/08 | |
| 22 ; known bugs: | |
| 23 ; ToDo: | |
| 24 | |
| 25 start: | |
| 26 movlb b'00000001' ; ram bank 1 selected | |
| 119 | 27 movff STKPTR,temp10 |
| 235 | 28 clrf temp10+1 |
| 0 | 29 call init |
| 30 btfsc divemode ; Reset from Divemode? | |
| 31 call PLED_resetdebugger ; Yes! Something went wrong, show reset informations | |
| 306 | 32 start3: |
| 0 | 33 clrf STKPTR ; Clear Stackpointer |
| 359 | 34 lfsr FSR0,year+1 ; Clear rambank 1-9, do not delete RTC registers |
| 0 | 35 clear_rambank: |
| 36 clrf POSTINC0 | |
| 37 movlw 0x0A | |
| 38 cpfseq FSR0H ; Bank 9 done? | |
| 39 bra clear_rambank ; clear... | |
| 40 | |
| 41 ; Defaults for RTC | |
| 42 call disable_rs232 ; disable UART module | |
| 43 call RTCinit ; reset RTC | |
| 44 | |
| 45 ; Air pressure compensation after reset | |
| 46 call get_calibration_data ; Get calibration data from pressure sensor | |
| 47 | |
| 48 bcf pressure_refresh | |
| 49 wait_start_pressure: | |
| 50 btfss pressure_refresh ; Air pressure compensation | |
| 51 bra wait_start_pressure | |
| 52 | |
| 53 clrf rel_pressure+0 | |
| 54 clrf rel_pressure+1 | |
| 55 clrf surface_interval+0 | |
| 56 clrf surface_interval+1 | |
| 57 | |
| 58 bsf sleepmode ; Routine only works in sleepmode... | |
| 59 call pressuretest_sleep_fast ; Gets pressure without averaging (faster!) | |
| 60 bcf sleepmode ; Normal mode again | |
| 233 | 61 |
| 380 | 62 SAFE_2BYTE_COPY amb_pressure_avg, last_surfpressure |
| 63 SAFE_2BYTE_COPY amb_pressure_avg, amb_pressure | |
|
341
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
64 movff last_surfpressure+0,last_surfpressure_15min+0 |
|
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
65 movff last_surfpressure+1,last_surfpressure_15min+1 |
|
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
66 movff last_surfpressure+0,last_surfpressure_30min+0 |
|
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
67 movff last_surfpressure+1,last_surfpressure_30min+1 ; Rests all airpressure registers |
| 0 | 68 |
| 233 | 69 ; Extra power-up reset (JeanDo) |
| 70 ifdef TESTING | |
| 71 call do_menu_reset_all2 | |
| 72 endif | |
| 73 | |
| 0 | 74 ; reset deco data |
| 236 | 75 ostc_debug '0' ; Sends debug-information to screen if debugmode active |
| 76 | |
| 0 | 77 movlw d'79' ; 79% N2 |
| 197 | 78 movff WREG,char_I_N2_ratio ; No He at the Surface |
| 236 | 79 clrf WREG ; Use as buffer |
| 80 movff WREG,char_I_He_ratio ; No He at the Surface | |
| 81 movff WREG,char_I_step_is_1min ; 2 second deco mode | |
| 82 GETCUSTOM8 d'11' ; Saturation multiplier % | |
| 83 movff WREG,char_I_saturation_multiplier | |
| 84 GETCUSTOM8 d'12' ; Desaturation multiplier % | |
| 85 movff WREG,char_I_desaturation_multiplier | |
|
341
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
86 SAFE_2BYTE_COPY amb_pressure,int_I_pres_respiration ; copy for deco routine |
|
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
87 movff int_I_pres_respiration+0,int_I_pres_surface+0 ; copy for desat routine |
|
2144f19fa1eb
BUGFIX protect against ISR changing pressure/temperature while reading it.
JeanDo
parents:
327
diff
changeset
|
88 movff int_I_pres_respiration+1,int_I_pres_surface+1 |
| 0 | 89 |
| 116 | 90 call deco_clear_tissue ; |
| 91 call deco_calc_desaturation_time ; calculate desaturation time | |
| 92 call deco_clear_CNS_fraction ; clear CNS | |
| 0 | 93 call calc_deko_surfmode ; calculate desaturation every minute |
| 116 | 94 call deco_calc_wo_deco_step_1_min ; calculate deco in surface mode |
| 0 | 95 movlb b'00000001' ; select ram bank 1 |
| 96 | |
| 97 ; check firmware and reset Custom Functions after an update | |
|
384
904863f96582
Work-Around for "Reset all" overwriting 0x00 to 0x04 in EEPROM Bank1
heinrichsweikamp
parents:
380
diff
changeset
|
98 movlw d'1' |
| 0 | 99 movwf EEADR |
|
384
904863f96582
Work-Around for "Reset all" overwriting 0x00 to 0x04 in EEPROM Bank1
heinrichsweikamp
parents:
380
diff
changeset
|
100 movlw d'1' |
| 0 | 101 movwf EEADRH |
| 102 call read_eeprom ; read current version x | |
| 103 movff EEDATA,temp1 | |
| 104 incf EEADR,F ; set to 0x102 | |
| 105 call read_eeprom ; read current version y | |
| 106 movff EEDATA,temp2 | |
| 107 clrf EEADRH ; Reset EEADRH | |
| 108 | |
| 109 movlw softwareversion_x | |
| 110 cpfseq temp1 ; compare version x | |
| 111 bra check_firmware_new ; is not equal -> reset CF and store new version in EEPROM | |
| 112 | |
| 113 movlw softwareversion_y | |
| 114 cpfseq temp2 ; compare version y | |
| 115 bra check_firmware_new ; is not equal -> reset CF and store new version in EEPROM | |
| 116 bra restart ; x and y are equal -> do not reset cf | |
| 117 | |
| 118 check_firmware_new: | |
|
384
904863f96582
Work-Around for "Reset all" overwriting 0x00 to 0x04 in EEPROM Bank1
heinrichsweikamp
parents:
380
diff
changeset
|
119 movlw d'1' ; store current version in EEPROM |
| 0 | 120 movwf EEADR |
|
384
904863f96582
Work-Around for "Reset all" overwriting 0x00 to 0x04 in EEPROM Bank1
heinrichsweikamp
parents:
380
diff
changeset
|
121 movlw d'1' |
| 0 | 122 movwf EEADRH |
| 123 movlw softwareversion_x | |
| 124 movwf EEDATA | |
| 125 call write_eeprom ; write version x | |
| 126 incf EEADR,F ; set to 0x102 | |
| 127 movlw softwareversion_y | |
| 128 movwf EEDATA | |
| 129 call write_eeprom ; write version y | |
| 130 clrf EEADRH ; Reset EEADRH | |
| 392 | 131 |
| 132 ; Reset CF48 | |
| 133 movlw d'1' | |
| 393 | 134 movwf EEADRH ; EEPROM Bank1 |
| 392 | 135 clrf EEDATA ; =0 |
| 136 write_int_eeprom d'191' | |
| 137 write_int_eeprom d'192' | |
| 138 write_int_eeprom d'193' | |
| 139 write_int_eeprom d'194' ; Reset Default and Current Value to zero | |
| 393 | 140 clrf EEADRH |
| 366 | 141 ; goto reset_all_cf ; resets all custom functions bank0 and bank1 and jumps to "restart" |
| 0 | 142 |
| 143 restart: | |
| 390 | 144 movlw b'00000011' |
| 145 movwf T3CON ; Timer3 with 32768Hz clock running | |
| 146 clrf TMR3L | |
| 147 clrf TMR3H | |
| 21 | 148 bcf LED_red |
| 149 bcf LED_blue ; all LEDs off | |
| 43 | 150 GETCUSTOM8 d'48' ; time correction value |
| 151 movff WREG, time_correction_value ; store in Bank0 register | |
| 15 | 152 |
| 153 clrf flag1 ; clear all flags | |
| 154 clrf flag2 | |
| 155 clrf flag3 | |
| 156 clrf flag4 | |
| 157 clrf flag5 | |
| 158 clrf flag6 | |
| 159 clrf flag7 | |
| 160 clrf flag8 | |
| 161 clrf flag9 | |
| 162 clrf flag10 | |
| 163 clrf flag11 | |
| 164 clrf flag12 | |
| 165 clrf flag13 | |
| 166 clrf flag14 | |
| 167 clrf flag15 | |
| 153 | 168 |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
169 ; Should we set win_flip_screen ? |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
170 bsf flag1,0 ; Precondition to yes |
| 153 | 171 clrf EEADRH ; Reset EEADRH |
| 172 read_int_eeprom d'1' | |
| 173 movlw .7 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
174 cpfsgt EEDATA ; serial > 2048 (Mk2n hardware) ? |
| 153 | 175 bcf flag1,0 |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
176 incf EEDATA,W ; serial == 65535 (emulation) ? |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
177 btfsc STATUS,Z |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
178 bcf flag1,0 |
| 153 | 179 movff flag1,win_flags ; store in Bank0 register |
| 180 clrf flag1 ; Clear flag1 (again) | |
| 239 | 181 |
| 182 ; Select high altitude (Fly) mode? | |
| 183 movff last_surfpressure_30min+0,sub_b+0 | |
| 184 movff last_surfpressure_30min+1,sub_b+1 | |
| 185 movlw HIGH d'880' | |
| 186 movwf sub_a+1 | |
| 187 movlw LOW d'880' ; Hard-wired 880mBar | |
| 188 movwf sub_a+0 | |
| 189 call sub16 ; sub_c = sub_a - sub_b | |
| 190 btfss neg_flag ; Result negative (Ambient>880mBar)? | |
| 191 bsf high_altitude_mode ; No, Set Flag! | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
192 |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
193 ; Should we disable sleep (hardware emulator) |
| 390 | 194 restart_loop: |
| 195 btfss 0xF81,0,A | |
| 196 bra restart_loop | |
| 197 btfss 0xF81,1,A | |
| 198 bra restart_loop | |
| 199 movlw 0x80 | |
| 200 cpfslt 0xFB3,A | |
| 167 | 201 bsf nsm ; NO-SLEEP-MODE : for hardware debugging |
| 153 | 202 |
| 142 | 203 call gassetup_sort_gaslist ; Sorts Gaslist according to change depth |
| 0 | 204 WIN_TOP .0 |
| 205 WIN_LEFT .0 | |
| 206 WIN_FONT FT_SMALL | |
| 207 WIN_INVERT .0 ; Init new Wordprocessor | |
|
83
3e351e25f5d1
adding anti-aliased fonts frame and merging some patches from Jeando
heinrichsweikamp
parents:
62
diff
changeset
|
208 setf WREG |
|
3e351e25f5d1
adding anti-aliased fonts frame and merging some patches from Jeando
heinrichsweikamp
parents:
62
diff
changeset
|
209 movff WREG,win_color1 ; Beware: win_color1 is bank0, and we are bank1 currently |
|
3e351e25f5d1
adding anti-aliased fonts frame and merging some patches from Jeando
heinrichsweikamp
parents:
62
diff
changeset
|
210 movff WREG,win_color2 |
| 0 | 211 call I2CReset ; Just in Case any I2C device blocks the Bus |
| 212 movff last_surfpressure_30min+0,last_surfpressure+0 ; Use 30min old airpressure | |
| 213 movff last_surfpressure_30min+1,last_surfpressure+1 ; Use 30min old airpressure | |
| 214 | |
| 215 ; Check if new CF were added in the last firmware version | |
| 216 clrf EEADRH | |
| 217 read_int_eeprom d'92' ; Read number of CF used in this firmware | |
| 218 movlw max_custom_number ; Defined in definitions.asm | |
| 219 cpfseq EEDATA ; Compare with last version | |
| 220 bra restart_01 ; New CF, show warning and store new number | |
| 221 bra restart_1 ; No new CF, continue with boot | |
| 222 restart_01: | |
| 223 ; Save new number of current CF count | |
|
411
e6e1b89b7c3e
BUGFIX: CNS was not cleared with a "Reset Deco"
heinrichsweikamp
parents:
393
diff
changeset
|
224 call PLED_boot ; PLED boot (Incl. Clear Screen!) |
| 0 | 225 rcall display_new_cf_installed; Show warning |
| 226 movlw max_custom_number ; Defined in definitions.asm | |
| 227 movwf EEDATA | |
| 228 write_int_eeprom d'92' ; Store number of CF used in this firmware | |
| 229 | |
| 230 restart_1: | |
| 231 | |
| 232 ; Set Debug mode? | |
| 233 read_int_eeprom d'39' | |
| 234 bsf debug_mode | |
| 235 movlw d'1' | |
| 236 cpfseq EEDATA | |
| 237 bcf debug_mode ; clear flag if <> 1 | |
| 238 | |
|
362
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
239 ; Check if logbook has been converted already (Internal EEPROM 0x100=0xAA) |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
240 movlw LOW 0x100 |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
241 movwf EEADR |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
242 movlw HIGH 0x100 |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
243 movwf EEADRH |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
244 call read_eeprom ; read byte |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
245 movlw 0xAA |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
246 cpfseq EEDATA ; is 0xAA already? |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
247 call logbook_convert_64k ; No, convert now (And write 0xAA to internal EEPROM 0x100) |
|
64da813d4726
Logbook converter (Needs ~8Minutes and is called one time). Backup your dives before use!!
Heinrichsweikamp
parents:
359
diff
changeset
|
248 |
| 0 | 249 goto surfloop ; Jump to Surfaceloop! |
| 250 | |
| 251 | |
| 252 display_new_cf_installed: | |
| 253 call PLED_new_cf_warning ; Display new CF warning screen | |
| 254 movlw d'20' ; timeout for warning screen | |
| 255 bra startup_screen3a ; Will RETURN after timeout or button press | |
| 197 | 256 |
| 257 ;============================================================================= | |
| 258 ; Setup all flags and parameters for divemode and simulator computations. | |
| 259 ; | |
| 260 restart_set_modes_and_flags: ; "Call"ed from divemode, as well! | |
| 0 | 261 bcf gauge_mode |
| 262 bcf FLAG_const_ppO2_mode | |
| 263 bcf FLAG_apnoe_mode | |
| 45 | 264 |
| 265 ; Pre-load modes for OC, GF 90/90 and no Aponoe or Gauge. | |
| 197 | 266 bcf no_deco_customviews ; Clear no-deco-mode-flag |
| 45 | 267 movlw d'0' |
| 197 | 268 movff WREG,char_I_deco_model ; Clear Flagbyte |
| 45 | 269 ; Load GF values into RAM |
| 270 movlw d'90' | |
| 197 | 271 movff WREG,char_I_GF_Low_percentage |
| 272 movff WREG,char_I_GF_High_percentage ; Set to 90/90... | |
| 0 | 273 clrf EEADRH |
| 197 | 274 read_int_eeprom d'34' ; Read deco data |
| 275 movlw d'1' ; Gauge mode | |
| 0 | 276 cpfseq EEDATA |
| 197 | 277 bra restart_3_test_ppO2_mode ; check for ppO2 mode |
| 278 bsf gauge_mode ; Set flag for gauge mode | |
| 279 bsf no_deco_customviews ; Set no-deco-mode-flag | |
| 280 return ; start in Surfacemode | |
| 0 | 281 restart_3_test_ppO2_mode: |
| 197 | 282 movlw d'2' ; const ppO2 mode |
| 0 | 283 cpfseq EEDATA |
| 197 | 284 bra restart_3_test_apnoe_mode; check for apnoe mode |
| 285 bsf FLAG_const_ppO2_mode ; Set flag for ppO2 mode | |
| 286 return ; start in Surfacemode | |
| 0 | 287 restart_3_test_apnoe_mode: |
| 197 | 288 movlw d'3' ; Apnoe mode |
| 0 | 289 cpfseq EEDATA |
| 197 | 290 bra restart_4_test_gf_mode ; check for GF OC mode |
| 291 bsf FLAG_apnoe_mode ; Set flag for Apnoe Mode | |
| 292 bsf no_deco_customviews ; Set no-deco-mode-flag | |
| 293 return ; start in Surfacemode | |
| 0 | 294 restart_4_test_gf_mode: |
| 197 | 295 movlw d'4' ; GF OC mode |
| 0 | 296 cpfseq EEDATA |
| 197 | 297 bra restart_5_test_gfO2_mode ; check for GF CC mode |
| 0 | 298 movlw d'1' |
| 197 | 299 movff WREG,char_I_deco_model ; Set Flagbyte for GF method |
| 45 | 300 ; Load GF values into RAM |
| 197 | 301 GETCUSTOM8 d'32' ; GF low |
| 302 movff EEDATA,char_I_GF_Low_percentage | |
| 303 GETCUSTOM8 d'33' ; GF high | |
| 304 movff EEDATA,char_I_GF_High_percentage | |
| 305 return ; start in Surfacemode | |
| 0 | 306 restart_5_test_gfO2_mode: |
| 197 | 307 movlw d'5' ; GF CC mode |
| 0 | 308 cpfseq EEDATA |
| 197 | 309 return ; Start in Surfacemode |
| 310 bsf FLAG_const_ppO2_mode ; Set flag for ppO2 mode | |
| 0 | 311 movlw d'1' |
| 197 | 312 movff WREG,char_I_deco_model ; Set Flagbyte for GF method |
| 137 | 313 ; Load GF values into RAM |
| 197 | 314 GETCUSTOM8 d'32' ; GF low |
| 163 | 315 movff EEDATA,char_I_GF_Low_percentage |
| 197 | 316 GETCUSTOM8 d'33' ; GF high |
| 163 | 317 movff EEDATA,char_I_GF_High_percentage |
| 197 | 318 return ; start in Surfacemode |
| 319 | |
| 320 ;============================================================================= | |
| 0 | 321 |
| 322 startup_screen1: | |
| 323 call PLED_ClearScreen | |
| 324 call PLED_startupscreen1 ; show startup sreen | |
| 325 startup_screen1_2: | |
| 326 movlw d'10' ; timeout for startup screen | |
| 327 movwf temp1 | |
| 328 WAITMS d'200' | |
| 329 bcf switch_left | |
| 330 bcf switch_right | |
| 331 screen1_loop: | |
| 337 | 332 btfsc uart_dump_screen ; Asked to dump screen contains ? |
| 333 call dump_screen ; Yes! | |
| 334 | |
| 0 | 335 btfsc onesecupdate ; do every second tasks? |
| 336 call set_dive_modes ; tests if depth>threshold | |
| 337 btfsc onesecupdate ; do every second tasks? | |
| 338 decf temp1,F | |
| 339 bcf onesecupdate ; every second tasks done | |
| 340 | |
| 341 tstfsz temp1 ; timout occured? | |
| 342 bra screen1_loop2 ; no | |
| 343 return | |
| 344 | |
| 345 screen1_loop2: | |
| 346 btfsc divemode ; Divemode active? | |
| 347 return | |
| 348 btfsc switch_left ; Ack? | |
| 349 return | |
| 350 btfsc switch_right ; Ack? | |
| 351 return | |
| 352 bra screen1_loop ; loop screen | |
| 353 | |
| 354 startup_screen2: | |
| 355 call PLED_ClearScreen ; Page 1 | |
| 356 call PLED_startupscreen2 ; show startup sreen | |
| 357 bra startup_screen1_2 | |
| 358 | |
| 359 startup_screen3a:; WARNING: Also used for decodescriptions and CF Warning screen! | |
| 360 movwf temp1 | |
| 361 WAITMS d'200' | |
| 362 bcf switch_left | |
| 363 bcf switch_right | |
| 364 screen3_loop: | |
| 337 | 365 btfsc uart_dump_screen ; Asked to dump screen contains ? |
| 366 call dump_screen ; Yes! | |
| 367 | |
| 0 | 368 btfsc onesecupdate ; do every second tasks? |
| 369 call set_dive_modes ; tests if depth>threshold | |
| 370 | |
| 371 btfsc onesecupdate ; do every second tasks? | |
| 372 decf temp1,F | |
| 373 bcf onesecupdate ; every second tasks done | |
| 374 | |
| 375 tstfsz temp1 ; timout occured? | |
| 376 bra screen3_loop2 ; no | |
| 377 return | |
| 378 screen3_loop2: | |
| 379 btfsc switch_left ; Ack? | |
| 380 return | |
| 381 btfsc switch_right ; Ack? | |
| 382 return | |
| 383 bra screen3_loop ; loop screen | |
| 384 | |
| 337 | 385 ;============================================================================= |
| 386 | |
| 306 | 387 first_start: |
| 388 movlw max_custom_number ; Defined in definitions.asm | |
| 389 movwf EEDATA | |
| 390 write_int_eeprom d'92' ; Store number of CF used in this firmware | |
| 391 bra start3 ; continue with normal start | |
| 392 | |
| 0 | 393 init: |
| 394 movlw b'01101100' ; 4MHz (x4 PLL) | |
| 395 movwf OSCCON | |
| 396 | |
| 397 movlw b'00010001' ; I/O Ports | |
| 398 movwf TRISA | |
| 399 clrf PORTA | |
| 400 movlw b'00000011' | |
| 401 movwf TRISB | |
| 402 clrf PORTB | |
| 403 movlw b'11011101' ; UART | |
| 404 movwf TRISC | |
| 405 clrf PORTC | |
| 406 movlw b'00000000' | |
| 407 movwf TRISE | |
| 408 clrf PORTE | |
| 409 movlw b'00000000' | |
| 410 movwf TRISD | |
| 411 clrf PORTD | |
| 412 | |
| 413 movlw b'01000000' ; Bit6: PPL enable | |
| 414 movwf OSCTUNE | |
| 415 | |
| 416 movlw b'00011111' ; Timer0 | |
| 417 movwf T0CON | |
| 418 | |
| 419 movlw b'00000111' ; Timer1 | |
| 420 movwf T1CON | |
| 421 | |
| 422 movlw b'11010000' ; Interrups | |
| 423 movwf INTCON | |
| 424 movlw b'00000101' | |
| 425 movwf INTCON2 | |
| 426 movlw b'00001000' | |
| 427 movwf INTCON3 | |
| 428 movlw b'00100001' | |
| 429 movwf PIE1 | |
| 430 movlw b'00000000' | |
| 431 movwf PIE2 | |
| 432 clrf RCON | |
| 433 | |
| 434 movlw b'00000000' ; A/D Converter | |
| 435 movwf ADCON0 | |
| 436 movlw b'00001110' | |
| 437 movwf ADCON1 | |
| 438 movlw b'10001010' ; Right justified | |
| 439 movwf ADCON2 | |
| 440 | |
| 441 clrf SSPCON1 ; Set I²C Mode | |
| 442 movlw b'00000000' | |
| 443 movwf SSPSTAT | |
| 444 movlw b'00101000' | |
| 445 movwf SSPCON1 | |
| 446 movlw b'00000000' | |
| 447 movwf SSPCON2 | |
| 448 movlw d'8' ; 400kHz I2C clock @ 16MHz Fcy | |
| 449 movwf SSPADD | |
| 450 | |
| 451 clrf CCP1CON ; PWM Module off | |
| 452 clrf ECCP1CON ; PWM Module off | |
| 453 | |
| 454 movlw b'00000111' ; Comperator Module off | |
| 455 movwf CMCON | |
| 456 | |
| 457 movlw b'00100000' | |
| 458 movwf CANCON ; ECAN Module OFF | |
| 459 | |
| 460 movlw b'00100100' ; UART | |
| 461 movwf TXSTA | |
| 462 movlw b'10010000' | |
| 463 movwf RCSTA | |
| 464 movlw b'00001000' | |
| 465 movwf BAUDCON | |
| 466 clrf SPBRGH | |
| 467 movlw d'34' | |
| 468 movwf SPBRG | |
| 469 clrf RCREG | |
| 470 clrf PIR1 | |
| 471 return |