Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/simulator.asm @ 217:ce6f16711567
BUGFIX gas switch
+ Make sure not to pass gas switch
+ Don't clobber ratio N2/He when canceling ascent passing gas switch.
+ Build-up GF_low history during the whole dive.
| author | JeanDo |
|---|---|
| date | Thu, 24 Feb 2011 23:22:32 +0100 |
| parents | 0a3ca358c684 |
| children | 49c90c5d9603 |
| rev | line source |
|---|---|
| 0 | 1 |
| 2 ; OSTC - diving computer code | |
| 3 ; Copyright (C) 2008 HeinrichsWeikamp GbR | |
| 4 | |
| 5 ; This program is free software: you can redistribute it and/or modify | |
| 6 ; it under the terms of the GNU General Public License as published by | |
| 7 ; the Free Software Foundation, either version 3 of the License, or | |
| 8 ; (at your option) any later version. | |
| 9 | |
| 10 ; This program is distributed in the hope that it will be useful, | |
| 11 ; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 ; GNU General Public License for more details. | |
| 14 | |
| 15 ; You should have received a copy of the GNU General Public License | |
| 16 ; along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 17 | |
| 18 | |
| 19 ; menu "Simulator" | |
| 20 ; written by: Matthias Heinrichs, info@heinrichsweikamp.com | |
| 21 ; written: 081210 | |
| 22 ; last updated: 081210 | |
| 23 ; known bugs: | |
| 24 ; ToDo: | |
| 25 | |
| 26 menu_simulator: | |
| 27 movlw d'1' | |
| 28 movwf logbook_temp1 ; Bottom time | |
| 29 movlw d'15' | |
| 30 movwf logbook_temp2 ; Max. Depth | |
| 31 movlw d'1' | |
| 32 movwf menupos | |
| 33 | |
| 34 menu_simulator1: | |
| 35 clrf timeout_counter2 | |
| 36 bsf menubit | |
| 37 bsf cursor | |
| 49 | 38 call PLED_brightness_full ;max. brightness |
| 0 | 39 call PLED_ClearScreen |
| 40 call PLED_simulator_mask | |
| 41 | |
| 42 menu_simulator2: | |
| 43 bcf switch_left | |
| 44 bcf switch_right | |
| 45 bcf menubit2 | |
| 46 bcf menubit3 | |
| 47 call PLED_simulator_data | |
| 48 call PLED_menu_cursor | |
| 49 | |
| 50 menu_simulator_loop: | |
| 51 call check_switches_menu | |
| 52 menu_simulator_loop2: | |
| 53 btfss onesecupdate | |
| 54 bra menu_simulator_loop3 | |
| 55 | |
| 56 call timeout_surfmode | |
| 57 call set_dive_modes | |
| 58 call test_charger ; check if charger IC is active | |
| 59 call get_battery_voltage ; get battery voltage | |
| 60 | |
| 61 bcf onesecupdate ; End of one second tasks | |
| 62 | |
| 63 menu_simulator_loop3: | |
| 64 btfsc menubit2 | |
| 65 goto menu_simulator_do ; call submenu | |
| 66 | |
| 67 btfss menubit | |
| 35 | 68 goto menu_simulator_exit |
| 0 | 69 |
| 70 btfsc sleepmode | |
| 35 | 71 goto menu_simulator_exit |
| 0 | 72 |
| 73 btfsc divemode | |
| 74 goto restart ; exit menu, restart and enter divemode | |
| 75 | |
| 76 bra menu_simulator_loop | |
| 77 | |
| 78 menu_simulator_do: ; calls submenu | |
| 79 dcfsnz menupos,F | |
| 80 bra simulator_startdive | |
| 81 dcfsnz menupos,F | |
| 82 bra simulator_inc_bottomtime | |
| 83 dcfsnz menupos,F | |
| 84 bra simulator_inc_maxdepth | |
| 85 dcfsnz menupos,F | |
| 86 bra simulator_calc_deco | |
| 87 dcfsnz menupos,F | |
| 88 bra simulator_show_decoplan | |
| 35 | 89 menu_simulator_exit: |
| 0 | 90 movlw d'4' |
| 91 movwf menupos | |
| 92 goto more_menu2 ; exit... | |
| 93 | |
| 94 simulator_inc_bottomtime: | |
| 95 movlw d'2' | |
| 96 addwf logbook_temp1,F ; Here: Bottomtime in m | |
| 97 movlw d'199' | |
| 98 cpfslt logbook_temp1 | |
| 99 movwf logbook_temp1 | |
| 100 movlw d'2' | |
| 101 movwf menupos | |
| 102 bra menu_simulator2 | |
| 103 | |
| 104 simulator_inc_maxdepth: | |
| 105 movlw d'3' | |
| 106 addwf logbook_temp2,F ; Here: Maxdepth in m | |
| 107 movlw d'99' | |
| 108 cpfslt logbook_temp2 | |
| 109 movwf logbook_temp2 | |
| 110 movlw d'3' | |
| 111 movwf menupos | |
| 112 bra menu_simulator2 | |
| 113 | |
| 114 simulator_startdive: | |
| 33 | 115 ; Descent to -15m depth |
| 0 | 116 ; Set standalone_simulator flag (Displays Simulator menu during simulation by pressing ENTER button) |
| 117 ; Clear standalone_simulator after (any) dive | |
| 118 bsf simulatormode_active ; normal simulator mode | |
| 119 bsf standalone_simulator ; Standalone Simulator active | |
| 120 | |
| 121 movff logbook_temp2,xA+0 | |
| 122 clrf xA+1 | |
| 123 movlw d'100' | |
| 124 movwf xB+0 | |
| 125 clrf xB+1 | |
| 126 call mult16x16 ;xA*xB=xC ; Depth in m*100 | |
| 127 | |
| 62 | 128 movlw LOW d'1000' |
| 0 | 129 addwf xC+0,F |
| 62 | 130 movlw HIGH d'1000' |
| 131 addwfc xC+1,F ; add 1000mBar | |
| 132 | |
| 133 ; movf amb_pressure+0,W | |
| 134 ; addwf xC+0,F | |
| 135 ; movf amb_pressure+1,W | |
| 136 ; addwfc xC+1,F ; Add ambient pressure | |
| 137 ; | |
| 0 | 138 movff xC+0,sim_pressure+0 |
| 139 movff xC+1,sim_pressure+1 | |
| 140 | |
| 141 movff sim_pressure+0,amb_pressure+0 ; override readings with simulator values | |
| 142 movff sim_pressure+1,amb_pressure+1 | |
| 143 | |
| 144 bcf menubit2 | |
| 145 bcf menubit3 | |
| 146 bcf menubit | |
| 147 bcf switch_left | |
| 148 bcf switch_right | |
| 149 | |
| 150 call simulator_save_tissue_data ; Stores 32 floats "pre_tissue" into bank3 | |
| 151 | |
| 200 | 152 movlw d'3' ; Begin of deco cycle (reset table). |
| 153 movff WREG,char_O_deco_status ; Reset Deco module. | |
| 154 | |
| 0 | 155 bsf divemode ; Set divemode flag |
| 156 ostc_debug 'P' ; Sends debug-information to screen if debugmode active | |
| 157 goto diveloop ; Start Divemode | |
| 158 | |
| 159 simulator_show_decoplan: | |
| 124 | 160 call PLED_ClearScreen |
| 161 call PLED_simdata_screen | |
| 162 call divemenu_see_decoplan | |
| 163 | |
| 184 | 164 WIN_LEFT .0 |
| 165 call PLED_standard_color | |
| 166 | |
| 124 | 167 ; Display TTS, if any... |
| 168 | 168 movff int_O_ascenttime+0,lo |
| 169 movff int_O_ascenttime+1,hi | |
| 170 movf lo,W | |
| 171 iorwf hi,W | |
| 124 | 172 bz simulator_decoplan_notts |
| 184 | 173 |
| 124 | 174 WIN_TOP .160 |
| 184 | 175 lfsr FSR2, letter |
| 176 OUTPUTTEXT .85 ; TTS (for translation). | |
| 177 STRCAT ": " | |
| 178 bsf leftbind | |
| 179 output_16 | |
| 180 STRCAT_PRINT "'" | |
| 181 | |
| 182 simulator_decoplan_notts: | |
| 183 movff int_I_pres_surface+0,lo | |
| 184 movff int_I_pres_surface+1,hi | |
| 185 | |
| 186 WIN_TOP .190 ; Print Pamb used for compute | |
| 187 lfsr FSR2, letter | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
188 bsf leftbind |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
189 output_16 |
| 124 | 190 bcf leftbind |
| 184 | 191 STRCAT_PRINT " mbar" |
| 124 | 192 |
| 193 WIN_INVERT .1 ; Init new Wordprocessor | |
| 194 DISPLAYTEXT .188 ; Sim. Results: | |
| 195 WIN_INVERT .0 ; Init new Wordprocessor | |
| 34 | 196 |
| 64 | 197 simulator_show_decoplan1: |
| 0 | 198 bcf switch_left |
| 199 bcf switch_right | |
| 200 simulator_show_decoplan2: | |
| 201 btfss onesecupdate | |
| 202 bra simulator_show_decoplan3 | |
| 203 | |
| 204 call timeout_surfmode | |
| 205 call set_dive_modes | |
| 206 call test_charger ; check if charger IC is active | |
| 207 call get_battery_voltage ; get battery voltage | |
| 208 | |
| 209 bcf onesecupdate ; End of one second tasks | |
| 210 | |
| 211 simulator_show_decoplan3: | |
| 64 | 212 btfsc switch_right |
| 0 | 213 bra simulator_show_decoplan4 ; Quit display |
| 214 | |
| 64 | 215 btfsc switch_left |
| 216 bra simulator_show_decoplan5 ; Quit display or new Decoplan-Page (GF Mode only) | |
| 0 | 217 |
| 218 btfsc sleepmode | |
| 219 goto more_menu | |
| 220 | |
| 221 btfsc divemode | |
| 222 goto restart ; exit menu, restart and enter divemode | |
| 223 | |
| 224 bra simulator_show_decoplan2 | |
| 225 | |
| 64 | 226 simulator_show_decoplan5: |
| 124 | 227 incf decoplan_page,F |
| 64 | 228 btfsc last_ceiling_gf_shown ; last ceiling shown? |
| 229 bra simulator_show_decoplan5_0 ; All done, clear and return | |
| 230 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
231 call PLED_decoplan ; Re-Draw Current page of GF Decoplan |
| 64 | 232 bra simulator_show_decoplan1 |
| 233 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
234 simulator_show_decoplan5_0: |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
235 bcf display_see_deco ; clear flag |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
236 bra simulator_show_decoplan4 ; Quit |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
168
diff
changeset
|
237 |
| 0 | 238 simulator_show_decoplan4: |
| 239 movlw d'5' | |
| 240 movwf menupos | |
| 241 bra menu_simulator1 | |
| 242 | |
| 243 | |
| 244 simulator_calc_deco: | |
| 245 call diveloop_boot ; configure gases, etc. | |
| 246 | |
| 247 bsf simulatormode_active ; normal simulator mode | |
| 248 bsf standalone_simulator ; Standalone Simulator active | |
| 249 | |
| 200 | 250 movff logbook_temp1,logbook_temp3 ; store bottom time. |
| 0 | 251 |
| 197 | 252 movff logbook_temp2,xA+0 ; Bottom depth. |
| 0 | 253 clrf xA+1 |
| 254 movlw d'100' | |
| 255 movwf xB+0 | |
| 256 clrf xB+1 | |
| 257 call mult16x16 ;xA*xB=xC ; Depth in m*100 | |
| 258 | |
| 62 | 259 movlw LOW d'1000' |
| 0 | 260 addwf xC+0,F |
| 62 | 261 movlw HIGH d'1000' |
| 262 addwfc xC+1,F ; add 1000mBar | |
| 263 | |
| 0 | 264 movff xC+0,sim_pressure+0 |
| 265 movff xC+1,sim_pressure+1 | |
| 266 | |
| 267 movff sim_pressure+0,amb_pressure+0 ; override readings with simulator values | |
| 268 movff sim_pressure+1,amb_pressure+1 | |
| 269 | |
| 197 | 270 call simulator_save_tissue_data ; Stores 32 floats "pre_tissue" into bank3 |
| 0 | 271 |
| 124 | 272 call PLED_topline_box |
| 0 | 273 WIN_INVERT .1 |
| 197 | 274 DISPLAYTEXT .12 ; "Wait..." |
| 0 | 275 WIN_INVERT .0 |
| 276 | |
| 197 | 277 call divemode_check_decogases ; Checks for decogases and sets the gases |
| 278 call divemode_prepare_flags_for_deco | |
| 200 | 279 movlw d'3' ; Begin of deco cycle (reset table). |
| 197 | 280 movff WREG,char_O_deco_status ; Reset Deco module. |
| 281 | |
| 0 | 282 simulator_calc_deco_loop1: |
| 197 | 283 call deco_calc_hauptroutine ; calc_tissue |
| 284 movlb b'00000001' ; rambank 1 selected | |
| 32 | 285 |
| 124 | 286 movff char_O_deco_status,WREG |
| 287 tstfsz WREG ; deco_status=0 if decompression calculation done | |
| 197 | 288 bra simulator_calc_deco_loop1 ; Not finished |
| 0 | 289 |
| 31 | 290 movlw d'1' |
| 197 | 291 movff WREG,char_I_step_is_1min ; 1 minute mode |
| 32 | 292 |
| 293 simulator_calc_deco_loop2: | |
| 294 call PLED_simulator_data | |
| 197 | 295 btg LED_red |
| 32 | 296 |
| 197 | 297 call divemode_check_decogases ; Checks for decogases and sets the gases |
| 0 | 298 call divemode_prepare_flags_for_deco |
| 299 | |
| 116 | 300 call deco_calc_hauptroutine ; calc_tissue |
| 197 | 301 movlb b'00000001' ; rambank 1 selected |
| 302 ostc_debug 'C' ; Sends debug-information to screen if debugmode active | |
| 303 | |
| 304 decfsz logbook_temp1,F ; Decrement bottom time. | |
| 305 bra simulator_calc_deco_loop2 | |
| 32 | 306 |
| 307 movlw d'0' | |
| 197 | 308 movff WREG,char_I_step_is_1min ; 2 second deco mode |
| 309 | |
| 310 simulator_calc_deco2: | |
| 200 | 311 btg LED_red |
| 312 | |
| 197 | 313 call divemode_check_decogases ; Checks for decogases and sets the gases |
| 314 call divemode_prepare_flags_for_deco | |
| 32 | 315 |
| 197 | 316 call deco_calc_hauptroutine ; calc_tissue |
| 317 movlb b'00000001' ; rambank 1 selected | |
| 0 | 318 |
| 197 | 319 movff char_O_deco_status,WREG |
| 320 tstfsz WREG ; deco_status=0 if decompression calculation done | |
| 321 bra simulator_calc_deco2 ; Not finished | |
| 0 | 322 |
| 197 | 323 ; Finished |
| 21 | 324 bsf LED_red |
| 0 | 325 |
| 326 call simulator_restore_tissue_data ; Restore 32 floats "pre_tissue" from bank3 | |
| 327 | |
| 197 | 328 bcf simulatormode_active ; normal simulator mode |
| 329 bcf standalone_simulator ; Standalone Simulator active | |
| 0 | 330 |
| 331 WAITMS d'250' | |
| 332 WAITMS d'250' | |
| 197 | 333 WAITMS d'250' ; Wait for Pressure Sensor to get real pressure again... |
| 0 | 334 |
| 197 | 335 bcf LED_red |
| 0 | 336 |
| 197 | 337 movlw d'5' ; Pre-Set Cursor to "Show Decoplan" |
| 338 movwf menupos | |
| 200 | 339 movff logbook_temp3,logbook_temp1 ; restore bottom time. |
| 197 | 340 bra menu_simulator1 ; Done. |
| 49 | 341 |
| 342 | |
| 343 simulator_save_tissue_data: | |
| 344 bsf restore_deco_data ; Set restore flag | |
| 345 ostc_debug 'S' ; Sends debug-information to screen if debugmode active | |
| 116 | 346 call deco_push_tissues_to_vault |
| 49 | 347 movlb 0x01 ; Back to RAM Bank1 |
| 348 ostc_debug 'T' ; Sends debug-information to screen if debugmode active | |
| 349 return | |
| 350 | |
| 351 simulator_restore_tissue_data: | |
| 352 bcf restore_deco_data ; clear restore flag | |
| 353 ostc_debug 'S' ; Sends debug-information to screen if debugmode active | |
| 116 | 354 call deco_pull_tissues_from_vault |
| 49 | 355 movlb 0x01 ; Back to RAM Bank1 |
| 356 ostc_debug 'T' ; Sends debug-information to screen if debugmode active | |
| 357 | |
| 358 ostc_debug 'G' ; Sends debug-information to screen if debugmode active | |
| 116 | 359 call deco_calc_desaturation_time ; calculate desaturation time |
| 49 | 360 movlb b'00000001' ; select ram bank 1 |
| 361 call calculate_noflytime ; Calc NoFly time | |
| 362 ostc_debug 'H' ; Sends debug-information to screen if debugmode active | |
| 363 | |
| 364 ; Calculate CNS | |
| 116 | 365 call deco_calc_CNS_fraction ; calculate CNS |
| 49 | 366 movlb b'00000001' ; rambank 1 selected |
| 367 return |