Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/divemode.asm @ 301:a5fd8777a598
Display ppO2[Diluent] in CCR modes
| author | heinrichsweikamp |
|---|---|
| date | Sat, 30 Apr 2011 10:40:18 +0200 |
| parents | 21a0f7393468 |
| children | 91371c7553f5 |
| rev | line source |
|---|---|
| 0 | 1 |
| 2 ; OSTC - diving computer code | |
| 3 ; Copyright (C) 2008 HeinrichsWeikamp GbR | |
| 4 | |
| 5 ; This program is free software: you can redistribute it and/or modify | |
| 6 ; it under the terms of the GNU General Public License as published by | |
| 7 ; the Free Software Foundation, either version 3 of the License, or | |
| 8 ; (at your option) any later version. | |
| 9 | |
| 10 ; This program is distributed in the hope that it will be useful, | |
| 11 ; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 ; GNU General Public License for more details. | |
| 14 | |
| 15 ; You should have received a copy of the GNU General Public License | |
| 16 ; along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 17 | |
| 18 | |
| 19 ; Mainroutines for divemode | |
| 20 ; written by: Matthias Heinrichs, info@heinrichsweikamp.com | |
| 21 ; written: 10/01/05 | |
| 22 ; last updated: 15/05/08 | |
| 23 ; known bugs: | |
| 24 ; ToDo: | |
| 25 | |
| 26 diveloop: | |
| 27 call diveloop_boot ; Boot tasks for all modes | |
| 28 | |
| 256 | 29 ; start timer3 for deco routine CPU usesage monitor |
| 30 movlw b'00000011' | |
| 31 movwf T3CON ; Timer3 with 32768Hz clock running | |
| 32 | |
| 0 | 33 ; Startup Tasks for all modes |
| 34 ostc_debug 'R' ; Sends debug-information to screen if debugmode active | |
| 35 call PLED_ClearScreen ; clean up OLED | |
| 36 call PLED_divemode_mask ; Display mask | |
| 37 call PLED_active_gas_divemode ; Display gas, if required | |
| 38 call PLED_temp_divemode ; Displays temperature | |
| 39 | |
| 40 btfsc FLAG_apnoe_mode | |
| 41 bsf realdive ; Set Realdive flag in Apnoe mode | |
| 42 | |
| 43 btfsc gauge_mode | |
| 44 bra diveloop_loop ; Skip in gauge mode | |
| 45 btfsc FLAG_apnoe_mode | |
| 46 bra diveloop_loop ; Skip in apnoe mode | |
| 47 | |
| 48 ; Startup Tasks for deco modes | |
| 49 call PLED_display_ndl_mask ; display "no stop" if not in gauge or apnoe mode | |
| 50 | |
| 51 diveloop_loop: ; The diveloop starts here | |
| 52 btfss onesecupdate ; tasks any new second | |
|
263
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
53 bra diveloop_loop3 |
| 0 | 54 |
| 55 btfsc gauge_mode ; Only in gauge mode | |
| 56 bra diveloop_loop1a ; One Second Tasks in Gauge mode | |
| 57 btfsc FLAG_apnoe_mode ; Only in apnoe mode | |
| 58 bra diveloop_loop1b ; One Second Tasks in Apnoe mode | |
| 59 btfsc FLAG_const_ppO2_mode ; only in const_ppO2_mode | |
| 60 bra diveloop_loop1c ; One Second Tasks in const_ppO2 mode | |
| 61 | |
| 62 ; Tasks only for OC modes | |
| 63 call check_ppO2 ; check ppO2 and displays warning if required | |
| 64 call calc_deko_divemode ; calculate decompression and display result (any two seconds) | |
| 65 bra diveloop_loop1x ; Common Tasks | |
| 66 | |
| 67 ; Tasks only for Gauge mode | |
| 68 diveloop_loop1a: | |
| 106 | 69 btfss premenu ; Is the divemode menu active? |
| 0 | 70 call PLED_divemins ; display (new) divetime! |
| 71 call timeout_divemode ; dive finished? This routine sets the required flags | |
| 72 | |
| 73 btfsc twosecupdate ; two seconds after the last call | |
|
263
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
74 bra diveloop_loop1a2 ; Common Tasks |
| 0 | 75 |
|
263
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
76 bsf twosecupdate ; Routines used in the "other second" |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
77 call calc_average_depth ; calculate average depth |
| 0 | 78 |
| 79 bra diveloop_loop1x ; Common Tasks | |
| 80 | |
| 81 diveloop_loop1a2: | |
| 82 bcf twosecupdate | |
| 83 bra diveloop_loop1x ; Common Tasks | |
| 84 | |
| 85 ; Tasks only for Apnoe mode | |
| 86 diveloop_loop1b: | |
| 87 call divemode_apnoe_tasks ; 1 sec. Apnoe tasks | |
| 88 bra diveloop_loop1x ; Common Tasks | |
| 89 | |
| 90 ; Tasks only for ppO2 mode | |
| 91 diveloop_loop1c: | |
| 92 call PLED_const_ppO2_value ; display const ppO2 setting in [Bar] | |
| 93 call calc_deko_divemode ; calculate decompression and display result (any two seconds) | |
| 3 | 94 btfsc is_bailout ; Are we in Bailout mode? |
| 95 call check_ppO2_bail ; Yes, display ppO2 (If required) | |
| 96 | |
| 0 | 97 bra diveloop_loop1x ; Common Tasks |
| 98 | |
| 99 ; Common Tasks for all modes | |
| 100 diveloop_loop1x: | |
|
263
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
101 call customview_second ; Do every-second tasks for the custom view area |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
102 |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
103 GETCUSTOM8 d'38' ; Show seconds (=1?) |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
104 movwf lo |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
105 movlw d'1' |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
106 cpfseq lo ; =1? |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
107 bra diveloop_loop1y ; No, minutes only |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
108 bsf update_divetime ; Set Update flag |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
109 diveloop_loop1y: |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
110 btfss update_divetime ; display new divetime? |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
111 bra diveloop_loop1z ; No |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
112 btfsc premenu ; Is the divemode menu active? |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
113 bra diveloop_loop1z ; Yes |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
114 call PLED_divemins ; Display (new) divetime! |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
115 |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
116 diveloop_loop1z |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
117 bcf update_divetime ; clear flag |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
118 |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
119 btfsc FLAG_const_ppO2_mode ; only in const_ppO2_mode |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
120 call PLED_const_ppO2_value ; display const ppO2 setting in [Bar] |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
121 btfsc ppO2_show_value ; show ppO2? |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
122 call check_ppO2 ; check ppO2 and displays warning if required |
|
27c9bb14b008
making the seconds display in divemode smoother...
heinrichsweikamp
parents:
257
diff
changeset
|
123 |
| 0 | 124 call timeout_divemode ; dive finished? This routine sets the required flags |
| 125 btfsc low_battery_state ; If battery is low, then... | |
| 141 | 126 call update_batt_voltage_divemode ; Display Battery Warning Text |
| 0 | 127 btfsc premenu ; is Menu? displayed? |
| 128 call timeout_premenu_divemode ; No, so check for timeout premenu | |
| 129 btfsc menubit ; is the Dive mode menu displayed? | |
| 130 call timeout_divemenu ; Yes, so check for timeout divemenu | |
| 131 call set_leds_divemode ; Sets warnings, if required. Also Sets buzzer | |
| 132 btfsc enter_error_sleep ; Enter Fatal Error Routine? | |
| 16 | 133 call fatal_error_sleep ; Yes (In Sleepmode_vxx.asm!) |
| 0 | 134 |
| 135 bcf onesecupdate ; one seconds update done | |
| 136 | |
| 137 diveloop_loop3: | |
| 138 btfss menubit ; Divemode menu active? | |
| 139 call test_switches_divemode ; No, Check switches normal | |
| 140 | |
| 141 btfsc menubit ; Divemode menu active? | |
| 142 call test_switches_divemode_menu ; Yes, check switches divemode menu | |
| 143 | |
| 144 btfss divemode ; Dive finished? | |
| 145 bra end_dive ; Dive finished! | |
| 146 | |
| 147 btfsc pressure_refresh ; new pressure available? | |
| 148 call update_divemode1 ; Yes, display new depth | |
| 149 bcf pressure_refresh ; until new pressure is available | |
| 150 | |
| 151 btfsc oneminupdate ; one minute tasks | |
| 152 call update_divemode60 ; Update clock, etc. | |
| 153 | |
| 154 btfsc store_sample ; store new sample? | |
| 155 call store_dive_data ; Store profile data | |
| 156 | |
|
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
157 btfsc toggle_customview ; Next view? |
|
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
158 call customview_toggle ; Yes, show next customview (and delete this flag) |
|
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
159 |
| 2 | 160 btfsc menubit ; Sleep only with inactive menu... |
| 161 bra diveloop_loop4 | |
| 162 | |
| 163 btfsc simulatormode_active ; Do not sleep in Simualtor mode | |
| 164 bra diveloop_loop4 | |
| 165 | |
| 0 | 166 sleep |
| 167 nop | |
| 2 | 168 diveloop_loop4: |
| 0 | 169 bra diveloop_loop ; Loop the divemode |
| 170 | |
| 171 timeout_premenu_divemode: | |
| 128 | 172 incf timeout_counter3,F ; Yes... |
| 0 | 173 |
| 128 | 174 GETCUSTOM8 d'4' ; loads premenu_timeout into WREG |
| 175 cpfsgt timeout_counter3 ; ... longer then premenu_timeout | |
| 176 return ; No! | |
| 0 | 177 |
| 128 | 178 bcf premenu ; Yes, so clear "Menu?" and clear pre_menu bit |
| 179 call PLED_menu_clear ; Remove "Menu?" | |
| 0 | 180 return |
| 181 | |
| 128 | 182 divemode_apnoe_tasks: ; 1 sec. Apnoe tasks |
| 0 | 183 call PLED_display_apnoe_descent ; Show descent timer |
| 184 | |
| 185 btfsc divemode2 ; Time running? | |
| 186 bra divemode_apnoe_tasks2 ; New descent, reset data if flag is set | |
| 187 | |
| 188 call PLED_display_apnoe_surface | |
| 189 incf apnoe_surface_secs,F | |
| 190 movlw d'60' | |
| 191 cpfseq apnoe_surface_secs | |
| 192 bra divemode_apnoe_tasks1 | |
| 193 clrf apnoe_surface_secs | |
| 194 incf apnoe_surface_mins,F | |
| 195 | |
| 196 divemode_apnoe_tasks1: | |
| 197 bcf FLAG_active_descent ; Clear flag | |
| 198 btfsc divemode2 ; Time running? | |
| 199 return ; Yes, return | |
| 200 | |
| 201 bsf FLAG_active_descent ; Set Flag | |
| 202 return | |
| 203 | |
| 204 divemode_apnoe_tasks2: | |
| 205 btfss FLAG_active_descent ; Are descending? | |
| 206 return ; No, We are at the surface | |
| 207 rcall apnoe_calc_maxdepth ; Yes! | |
| 208 | |
| 209 divemode_apnoe_tasks3: | |
| 210 call PLED_apnoe_clear_surface ; Clear Surface timer | |
| 211 | |
| 212 clrf apnoe_timeout_counter ; Delete timeout | |
| 213 clrf apnoe_surface_secs | |
| 214 clrf apnoe_surface_mins | |
| 215 clrf apnoe_secs | |
| 216 clrf apnoe_mins ; Reset Descent time | |
| 217 clrf max_pressure+0 | |
| 218 clrf max_pressure+1 ; Reset Max. Depth | |
| 219 bcf FLAG_active_descent ; Clear flag | |
| 220 return | |
| 221 | |
| 222 apnoe_calc_maxdepth: | |
| 223 movff apnoe_max_pressure+0,sub_a+0 | |
| 224 movff apnoe_max_pressure+1,sub_a+1 | |
| 225 movff max_pressure+0,sub_b+0 | |
| 226 movff max_pressure+1,sub_b+1 | |
| 227 call sub16 ; sub_c = sub_a - sub_b | |
| 228 ; apnoe_max_pressure<max_pressure -> neg_flag=1 | |
| 229 ; max_pressure<=apnoe_max_pressure -> neg_flag=0 | |
| 230 btfss neg_flag | |
| 231 return | |
| 232 ;apnoe_max_pressure<max_pressure | |
| 233 movff max_pressure+0,apnoe_max_pressure+0 | |
| 234 movff max_pressure+1,apnoe_max_pressure+1 | |
| 235 return | |
| 236 | |
| 237 set_leds_divemode: | |
| 238 movff char_O_gradient_factor,lo ; gradient factor absolute | |
| 239 | |
| 240 GETCUSTOM8 d'14' ; threshold for LED warning | |
| 241 cpfslt lo ; | |
| 242 call warn_gf1 ; show warning, set flags | |
| 243 | |
| 244 movff char_I_deco_model,lo | |
| 245 decfsz lo,W ; jump over return if char_I_deco_model == 1 | |
| 246 return | |
| 247 | |
| 248 movff char_O_relative_gradient_GF,lo ; gradient factor relative (GF model) | |
| 249 | |
| 250 GETCUSTOM8 d'14' ; threshold for LED warning | |
| 251 cpfslt lo ; | |
| 252 call warn_gf1 ; show warning, set flags | |
| 253 | |
| 254 return | |
| 255 | |
| 256 warn_gf1: | |
| 257 movlw d'2' ; Type of Alarm | |
| 258 movwf AlarmType ; Copy to Alarm Register | |
| 259 bsf event_occured ; Set Event Flag | |
| 260 return | |
| 261 | |
| 262 calc_deko_divemode: | |
| 263 btfsc twosecupdate ; two seconds after the last call | |
| 264 bra calc_deko_divemode2 ; Yes, calculate and display deco data ("first second") | |
| 265 | |
| 49 | 266 bsf twosecupdate ; No, but next second! |
| 0 | 267 ; Routines used in the "other second" |
| 268 call calc_average_depth ; calculate average depth | |
| 269 call calc_velocity ; calculate vertical velocity and display if > threshold (every two seconds) | |
| 270 | |
| 292 | 271 ; Calculate CNS |
| 272 rcall set_actual_ppo2 ; Set char_I_actual_ppO2 | |
| 273 clrf WREG | |
| 274 movff WREG,char_I_step_is_1min ; Make sure to be in 2sec mode. | |
| 0 | 275 |
| 116 | 276 call deco_calc_CNS_fraction ; calculate CNS |
| 0 | 277 movlb b'00000001' ; rambank 1 selected |
| 278 | |
| 279 ; Check if CNS should be displayed | |
| 280 movff char_O_CNS_fraction,lo ; copy into bank1 | |
| 281 GETCUSTOM8 d'27' ; cns_display_high | |
| 282 subwf lo,W | |
| 283 btfsc STATUS,C | |
| 284 call PLED_display_cns ; Show CNS | |
| 8 | 285 call check_gas_change ; Checks if a better gas should be selected (by user) |
| 286 | |
| 0 | 287 ; Check for decompression gases if in decomode |
| 288 btfss dekostop_active | |
| 289 bra reset_decompression_gases ; While in NDL, do not set deompression gas | |
| 290 | |
| 286 | 291 ; Copy all gases to char_I_deco_N2_ratio and char_I_deco_He_ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
292 divemode_check_decogases: ; CALLed from Simulator, too |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
293 |
| 291 | 294 clrf EEADRH ; Make sure to select eeprom bank 0 |
| 295 read_int_eeprom d'7' ; Read He ratio | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
296 movff EEDATA,char_I_deco_He_ratio+0 ; And copy into hold register |
| 291 | 297 read_int_eeprom d'6' ; Read O2 ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
298 movff char_I_deco_He_ratio+0, wait_temp ; copy into bank1 register |
| 49 | 299 bsf STATUS,C ; |
| 300 movlw d'100' ; 100% | |
| 301 subfwb wait_temp,W ; minus He | |
| 302 subfwb EEDATA,F ; minus O2 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
303 movff EEDATA, char_I_deco_N2_ratio+0; = N2! |
| 0 | 304 |
| 291 | 305 read_int_eeprom d'11' ; Read He ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
306 movff EEDATA,char_I_deco_He_ratio+1 ; And copy into hold register |
| 291 | 307 read_int_eeprom d'10' ; Read O2 ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
308 movff char_I_deco_He_ratio+1, wait_temp ; copy into bank1 register |
| 49 | 309 bsf STATUS,C ; |
| 310 movlw d'100' ; 100% | |
| 311 subfwb wait_temp,W ; minus He | |
| 312 subfwb EEDATA,F ; minus O2 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
313 movff EEDATA, char_I_deco_N2_ratio+1; = N2! |
| 49 | 314 |
| 291 | 315 read_int_eeprom d'15' ; Read He ratio |
| 224 | 316 movff EEDATA,char_I_deco_He_ratio+2 ; And copy into hold register |
| 291 | 317 read_int_eeprom d'14' ; Read O2 ratio |
| 224 | 318 movff char_I_deco_He_ratio+2, wait_temp ; copy into bank1 register |
| 49 | 319 bsf STATUS,C ; |
| 320 movlw d'100' ; 100% | |
| 321 subfwb wait_temp,W ; minus He | |
| 322 subfwb EEDATA,F ; minus O2 | |
| 224 | 323 movff EEDATA, char_I_deco_N2_ratio+2; = N2! |
| 49 | 324 |
| 291 | 325 read_int_eeprom d'19' ; Read He ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
326 movff EEDATA,char_I_deco_He_ratio+3 ; And copy into hold register |
| 291 | 327 read_int_eeprom d'17' ; Read O2 ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
328 movff char_I_deco_He_ratio+3, wait_temp ; copy into bank1 register |
| 49 | 329 bsf STATUS,C ; |
| 330 movlw d'100' ; 100% | |
| 331 subfwb wait_temp,W ; minus He | |
| 332 subfwb EEDATA,F ; minus O2 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
333 movff EEDATA, char_I_deco_N2_ratio+3; = N2! |
| 0 | 334 |
| 291 | 335 read_int_eeprom d'23' ; Read He ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
336 movff EEDATA,char_I_deco_He_ratio+4; And copy into hold register |
| 291 | 337 read_int_eeprom d'22' ; Read O2 ratio |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
338 movff char_I_deco_He_ratio+4, wait_temp ; copy into bank1 register |
| 39 | 339 bsf STATUS,C ; |
| 340 movlw d'100' ; 100% | |
| 341 subfwb wait_temp,W ; minus He | |
| 342 subfwb EEDATA,F ; minus O2 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
343 movff EEDATA, char_I_deco_N2_ratio+4; = N2! |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
344 |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
345 ; Copy depth of enabled gas into char_I_deco_gas_change |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
346 ; Note gaslist_active is inited in diveloop_boot, and edited by |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
347 ; the de-activation menu. So don't reread it from eeprom here. |
| 39 | 348 |
| 281 | 349 read_int_eeprom d'28' ; read gas_change_depth Gas1 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
350 btfss gaslist_active,0 ; Apply depth? |
| 221 | 351 clrf EEDATA ; No, clear! |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
352 movff EEDATA,char_I_deco_gas_change+0 ; Yes! |
| 221 | 353 |
| 281 | 354 read_int_eeprom d'29' ; read gas_change_depth Gas2 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
355 btfss gaslist_active,1 ; Apply depth? |
| 221 | 356 clrf EEDATA ; No, clear! |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
357 movff EEDATA,char_I_deco_gas_change+1 ; Yes! |
| 45 | 358 |
| 281 | 359 read_int_eeprom d'30' ; read gas_change_depth Gas3 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
360 btfss gaslist_active,2 ; Apply depth? |
| 221 | 361 clrf EEDATA ; No, clear! |
|
222
638f8e17bd51
Prototyping deco_gas_volumes() to compute gas consumption per tank with decoplanning.
JeanDo
parents:
221
diff
changeset
|
362 movff EEDATA,char_I_deco_gas_change+2 ; Yes! |
| 221 | 363 |
| 281 | 364 read_int_eeprom d'31' ; read gas_change_depth Gas4 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
365 btfss gaslist_active,3 ; Apply depth? |
| 221 | 366 clrf EEDATA ; No, clear! |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
367 movff EEDATA,char_I_deco_gas_change+3 ; Yes! |
| 221 | 368 |
| 281 | 369 read_int_eeprom d'32' ; read gas_change_depth Gas5 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
370 btfss gaslist_active,4 ; Apply depth? |
| 221 | 371 clrf EEDATA ; No, clear! |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
372 movff EEDATA,char_I_deco_gas_change+4 ; Yes! |
| 38 | 373 |
| 374 ; Debugger | |
| 45 | 375 ; call enable_rs232 |
| 224 | 376 ; movff char_I_deco_He_ratio+4,TXREG |
| 39 | 377 ; call rs232_wait_tx ; wait for UART |
| 224 | 378 ; movff char_I_deco_N2_ratio+4,TXREG |
| 39 | 379 ; call rs232_wait_tx ; wait for UART |
| 224 | 380 ; movff char_I_deco_He_ratio+3,TXREG |
| 39 | 381 ; call rs232_wait_tx ; wait for UART |
| 224 | 382 ; movff char_I_deco_N2_ratio+3,TXREG |
| 39 | 383 ; call rs232_wait_tx ; wait for UART |
| 224 | 384 ; movff char_I_deco_He_ratio+2,TXREG |
| 39 | 385 ; call rs232_wait_tx ; wait for UART |
| 224 | 386 ; movff char_I_deco_N2_ratio+2,TXREG |
| 39 | 387 ; call rs232_wait_tx ; wait for UART |
| 224 | 388 ; movff char_I_deco_He_ratio+1,TXREG |
| 39 | 389 ; call rs232_wait_tx ; wait for UART |
| 224 | 390 ; movff char_I_deco_N2_ratio+1,TXREG |
| 39 | 391 ; call rs232_wait_tx ; wait for UART |
| 392 ; movff char_I_deco_He_ratio,TXREG | |
| 393 ; call rs232_wait_tx ; wait for UART | |
| 394 ; movff char_I_deco_N2_ratio,TXREG | |
| 395 ; call rs232_wait_tx ; wait for UART | |
| 396 ; movff char_I_deco_gas_change5,TXREG | |
| 397 ; call rs232_wait_tx ; wait for UART | |
| 398 ; movff char_I_deco_gas_change4,TXREG | |
| 399 ; call rs232_wait_tx ; wait for UART | |
| 400 ; movff char_I_deco_gas_change3,TXREG | |
| 221 | 401 ; call rs232_wait_tx ; wait for UART |
| 39 | 402 ; movff char_I_deco_gas_change2,TXREG |
| 403 ; call rs232_wait_tx ; wait for UART | |
| 404 ; movff char_I_deco_gas_change,TXREG | |
| 405 ; call rs232_wait_tx ; wait for UART | |
| 47 | 406 |
| 33 | 407 return |
| 0 | 408 |
| 292 | 409 ;----------------------------------------------------------------------------- |
| 410 ; calculate ppO2 in 0.01Bar (e.g. 150 = 1.50 Bar ppO2) | |
| 411 set_actual_ppo2: | |
| 412 movff amb_pressure+0,xA+0 ; P_amb in milibar (1000 = 1.000 bar). | |
| 413 movff amb_pressure+1,xA+1 | |
| 414 movlw d'10' | |
| 415 movwf xB+0 | |
| 416 clrf xB+1 | |
| 417 call div16x16 ; xC=p_amb/10 (100 = 1.00 bar). | |
| 418 movff xC+0,xA+0 | |
| 419 movff xC+1,xA+1 | |
| 420 movff char_I_O2_ratio,xB+0 | |
| 421 clrf xB+1 | |
| 422 call mult16x16 ; char_I_O2_ratio * (p_amb/10) | |
| 423 movff xC+0,xA+0 | |
| 424 movff xC+1,xA+1 | |
| 425 movlw d'100' | |
| 426 movwf xB+0 | |
| 427 clrf xB+1 | |
| 428 call div16x16 ; xC=(char_I_O2_ratio * p_amb/10)/100 | |
| 429 | |
| 430 ; Copy ppO2 for CNS calculation | |
| 431 tstfsz xC+1 ; Is ppO2 > 2.55bar ? | |
| 432 setf xC+0 ; yes: bound to 2.55... better than wrap around. | |
| 433 | |
| 434 movff xC+0, char_I_actual_ppO2 ; copy last ppO2 to buffer register | |
| 435 btfsc FLAG_const_ppO2_mode ; do in const_ppO2_mode | |
| 436 movff char_I_const_ppO2, char_I_actual_ppO2 ; copy last ppO2 to buffer register | |
| 437 return | |
| 438 | |
| 0 | 439 reset_decompression_gases: ; reset the deco gas while in NDL |
| 440 ostc_debug 'F' ; Sends debug-information to screen if debugmode active | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
441 lfsr FSR2,char_I_deco_gas_change |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
442 clrf POSTINC2 ; Clear Gas1 |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
443 clrf POSTINC2 |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
444 clrf POSTINC2 |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
445 clrf POSTINC2 |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
446 clrf POSTINC2 ; Clear Gas5 |
| 0 | 447 return |
| 448 | |
| 449 calc_deko_divemode2: | |
| 450 bcf twosecupdate | |
| 451 | |
| 452 btfsc gauge_mode ; ignore decompression calculation in gauge mode | |
| 453 return | |
| 454 btfsc FLAG_apnoe_mode ; ignore decompression calculation in apnoe mode | |
| 455 return | |
| 456 | |
| 457 ostc_debug 'B' ; Sends debug-information to screen if debugmode active | |
| 458 call divemode_prepare_flags_for_deco | |
| 292 | 459 clrf WREG |
| 460 movff WREG,char_I_step_is_1min ; Force 2 second deco mode | |
| 40 | 461 |
| 256 | 462 clrf TMR3L |
| 463 clrf TMR3H ; Reset Timer3 | |
| 464 | |
| 116 | 465 call deco_calc_hauptroutine ; calc_tissue |
| 0 | 466 movlb b'00000001' ; rambank 1 selected |
| 467 ostc_debug 'C' ; Sends debug-information to screen if debugmode active | |
| 468 | |
| 256 | 469 btfss debug_mode ; Are we in debugmode? |
| 470 bra calc_deko_divemode4 ; No... | |
| 471 | |
| 472 ; Show timer3 reading converted into ms (Error: +2,3%) in custom area | |
| 473 movff TMR3L,lo | |
| 474 movff TMR3H,hi | |
| 475 bcf STATUS,C | |
| 476 rrcf hi | |
| 477 rrcf lo ;/2 | |
| 478 bcf STATUS,C | |
| 479 rrcf hi | |
| 480 rrcf lo ;/4 | |
| 481 bcf STATUS,C | |
| 482 rrcf hi | |
| 483 rrcf lo ;/8 | |
| 484 bcf STATUS,C | |
| 485 rrcf hi | |
| 486 rrcf lo ;/16 | |
| 487 bcf STATUS,C | |
| 488 rrcf hi | |
| 489 rrcf lo ;/32 | |
| 490 | |
| 491 WIN_TOP .216 | |
| 492 WIN_LEFT .100 | |
| 493 WIN_FONT FT_SMALL | |
| 494 STRCPY "ms:" | |
| 495 output_16 | |
| 496 call word_processor | |
| 497 | |
| 498 calc_deko_divemode4: | |
| 499 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
500 movff char_O_first_deco_depth,wait_temp ; copy ceiling to temp register |
| 0 | 501 tstfsz wait_temp ; Ceiling<0m? |
| 502 bra calc_deko_divemode3 ; Yes! | |
| 503 | |
| 504 btfsc dekostop_active | |
| 505 call PLED_display_ndl_mask ; Clear deco data, display nostop time | |
| 506 bcf dekostop_active ; clear flag | |
| 507 | |
| 508 clrf decodata+0 ; for profile memory | |
| 509 movff char_O_nullzeit,decodata+1 ; nostop time | |
| 510 | |
| 511 call PLED_display_ndl ; display no deco limit | |
| 512 return | |
| 513 | |
| 124 | 514 ;----------------------------------------------------------------------------- |
| 69 | 515 |
| 237 | 516 divemode_prepare_flags_for_deco: |
| 0 | 517 movff amb_pressure+0,int_I_pres_respiration+0 ; lo and copy result to deco routine |
| 518 movff amb_pressure+1,int_I_pres_respiration+1 ; hi | |
| 197 | 519 GETCUSTOM8 d'11' ; Saturation multiplier % |
| 520 movff WREG,char_I_saturation_multiplier | |
| 521 GETCUSTOM8 d'12' ; Desaturation multiplier % | |
| 522 movff WREG,char_I_desaturation_multiplier | |
| 523 GETCUSTOM8 d'16' ; Deco distance to decostop in 1/10 meter for simulation | |
| 524 movff WREG,char_I_deco_distance | |
| 525 GETCUSTOM8 d'29' ; Depth Last Deco in meter for simulation | |
| 526 movff WREG,char_I_depth_last_deco | |
| 203 | 527 movff divemins+0,int_I_divemins+0 ; Current dive time. |
| 528 movff divemins+1,int_I_divemins+1 | |
| 197 | 529 goto restart_set_modes_and_flags ; Sets decomode (char_I_deco_model) and flags (again) |
| 0 | 530 |
| 531 calc_deko_divemode3: | |
| 532 btfss dekostop_active | |
| 197 | 533 call PLED_display_deko_mask ; clear nostop time, display decodata |
| 0 | 534 bsf dekostop_active ; Set flag |
| 535 | |
|
169
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
536 movff char_O_first_deco_depth,decodata+0 ; ceiling |
|
e26f49674956
Merge decoplan display for both GF and Buhlmann models.
JeanDo
parents:
167
diff
changeset
|
537 movff char_O_first_deco_time,decodata+1 ; length of first stop in minues |
| 0 | 538 |
| 539 call PLED_display_deko ; display decodata | |
| 540 return | |
| 541 | |
| 542 store_dive_data: ; CF20 seconds gone | |
| 543 bcf store_sample ; update only any CF20 seconds | |
| 544 bsf update_divetime ; update divemins every CF20 seconds | |
| 545 | |
| 233 | 546 ifndef __DEBUG |
| 547 btfsc simulatormode_active ; Are we in simulator mode? | |
| 548 return ; Yes, discard everything | |
| 549 endif | |
| 33 | 550 |
| 0 | 551 btfsc header_stored ; Header already stored? |
|
71
6beb680a6130
1.72beta - color-coded gaslist, small fix with stopwatch
heinrichsweikamp
parents:
69
diff
changeset
|
552 bra store_dive_data2 ; Yes, store only profile data |
| 0 | 553 bsf header_stored ; Store header |
| 554 | |
| 555 movff eeprom_address+0, eeprom_header_address+0 ; store startposition | |
| 556 movff eeprom_address+1, eeprom_header_address+1 ; store startposition | |
| 557 | |
| 558 ; shift address for header | |
| 559 ; the header will be stored after the dive | |
| 560 incf_eeprom_address d'47' ; Macro, that adds 8Bit to eeprom_address:2 with banking at 0x8000 | |
| 561 | |
| 562 store_dive_data2: | |
| 563 movf rel_pressure+0,W ; store depth with every sample | |
| 564 call write_external_eeprom | |
| 565 movf rel_pressure+1,W | |
| 566 call write_external_eeprom | |
| 567 | |
| 568 ;First, find out how many bytes will append to this sample.... | |
| 569 clrf ProfileFlagByte ; clear number of bytes to append | |
| 570 | |
| 571 ; Check Extented informations | |
| 572 decfsz divisor_temperature,W ; Check divisor | |
| 573 bra check_extended1 | |
| 574 movlw d'2' ; Information length | |
| 575 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 576 check_extended1: | |
| 577 decfsz divisor_deco,W ; Check divisor | |
| 578 bra check_extended2 | |
| 579 movlw d'2' ; Information length | |
| 580 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 581 check_extended2: | |
| 582 decfsz divisor_tank,W ; Check divisor | |
| 583 bra check_extended3 | |
| 584 movlw d'2' ; Information length | |
| 585 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 586 check_extended3: | |
| 587 decfsz divisor_ppo2,W ; Check divisor | |
| 588 bra check_extended4 | |
| 589 movlw d'3' ; Information length | |
| 590 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 591 check_extended4: | |
| 592 decfsz divisor_deco_debug,W; Check divisor | |
| 593 bra check_extended5 | |
| 594 movlw d'9' ; Information length | |
| 595 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 596 check_extended5: | |
| 597 decfsz divisor_nuy2,W ; Check divisor | |
| 598 bra check_extended6 | |
| 599 movlw d'0' ; Information length | |
| 600 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 601 check_extended6: | |
| 602 | |
| 603 ; Second, check global event flag | |
| 604 btfss event_occured ; Check global event flag | |
| 605 bra store_dive_data3 ; No Event | |
| 606 movlw d'1' | |
| 607 addwf ProfileFlagByte,F ; add one byte (The EventByte) | |
| 608 | |
| 609 clrf EventByte ; reset EventByte | |
| 610 | |
| 611 movf AlarmType,W ; Type of Alarm Bit 0-3 | |
| 612 addwf EventByte,F ; Copy to EventByte Bit 0-3 | |
| 613 clrf AlarmType ; Reset AlarmType | |
| 614 | |
| 615 ; Third, check events and add aditional bytes | |
| 616 btfss manual_gas_changed ; Check flag | |
| 617 bra check_event1 | |
| 618 movlw d'2' ; Information length | |
| 619 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 620 bsf EventByte,4 ; Also set Flag in EventByte! | |
| 621 check_event1: | |
| 622 btfss stored_gas_changed ; Check flag | |
| 623 bra check_event2 | |
| 624 movlw d'1' ; Information length | |
| 625 addwf ProfileFlagByte,F ; add to ProfileFlagByte | |
| 626 bsf EventByte,5 ; Also set Flag in EventByte! | |
| 627 check_event2: | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
628 btfss setpoint_changed ; Check flag |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
629 bra check_event3 |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
630 movlw d'1' ; Information length |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
631 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
632 bsf EventByte,6 ; Also set Flag in EventByte! |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
633 check_event3: |
| 0 | 634 bsf ProfileFlagByte,7 ; Set EventByte Flag in ProfileFlagByte |
| 635 | |
| 636 store_dive_data3: | |
| 637 movf ProfileFlagByte,W ; finally, write ProfileFlagByte! | |
| 638 call write_external_eeprom | |
| 639 | |
| 640 btfss event_occured ; Check global event flag (again) | |
| 641 bra store_dive_data4 ; No Event | |
| 642 | |
| 643 ; Store the EventByte + additional bytes now | |
| 644 movf EventByte,W | |
| 645 call write_external_eeprom | |
| 646 | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
647 btfss manual_gas_changed ; Check flag |
| 0 | 648 bra store_dive_data3a |
| 649 read_int_eeprom d'24' ; % O2 Gas6 | |
| 650 movf EEDATA,W | |
| 651 call write_external_eeprom | |
| 652 read_int_eeprom d'25' ; % He Gas6 | |
| 653 movf EEDATA,W | |
| 654 call write_external_eeprom | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
655 bcf manual_gas_changed ; Clear this event |
| 0 | 656 |
| 657 store_dive_data3a: | |
| 658 btfss stored_gas_changed ; Check flag | |
| 659 bra store_dive_data3b | |
| 660 movf active_gas,W ; Store active gas | |
| 661 call write_external_eeprom | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
662 bcf stored_gas_changed ; Clear this event |
| 0 | 663 store_dive_data3b: |
| 664 | |
| 665 store_dive_data4: | |
| 666 | |
| 667 ; Store extended informations | |
| 668 decfsz divisor_temperature,F ; Check divisor | |
| 669 bra store_extended1 | |
| 670 rcall store_dive_temperature | |
| 671 store_extended1: | |
| 672 decfsz divisor_deco,F ; Check divisor | |
| 673 bra store_extended2 | |
| 674 rcall store_dive_decodata | |
| 675 store_extended2: | |
| 676 decfsz divisor_tank,F ; Check divisor | |
| 677 bra store_extended3 | |
| 678 rcall store_dive_tankdata | |
| 679 store_extended3: | |
| 680 decfsz divisor_ppo2,F ; Check divisor | |
| 681 bra store_extended4 | |
| 682 rcall store_dive_ppo2 | |
| 683 store_extended4: | |
| 684 decfsz divisor_deco_debug,F; Check divisor | |
| 685 bra store_extended5 | |
| 686 rcall store_dive_decodebug | |
| 687 store_extended5: | |
| 688 decfsz divisor_nuy2,F ; Check divisor | |
| 689 bra store_extended6 | |
| 690 rcall store_dive_nuy2 | |
| 691 store_extended6: | |
| 692 | |
| 693 ; The next block is required to take care of "store never" | |
| 694 btfsc divisor_temperature,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 695 clrf divisor_temperature ; And clear register again, so it will never reach zero... | |
| 696 btfsc divisor_deco,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 697 clrf divisor_deco ; And clear register again, so it will never reach zero... | |
| 698 btfsc divisor_tank,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 699 clrf divisor_tank ; And clear register again, so it will never reach zero... | |
| 700 btfsc divisor_ppo2,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 701 clrf divisor_ppo2 ; And clear register again, so it will never reach zero... | |
| 702 btfsc divisor_deco_debug,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 703 clrf divisor_deco_debug ; And clear register again, so it will never reach zero... | |
| 704 btfsc divisor_nuy2,7 ; Test highest Bit (Register must have been zero before the "decfsz" command!) | |
| 705 clrf divisor_nuy2 ; And clear register again, so it will never reach zero... | |
| 706 | |
| 707 ostc_debug 'D' ; Sends debug-information to screen if debugmode active | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
708 |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
709 ; SetPoint change appended to information due to compatibility reasons |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
710 btfss setpoint_changed ; Check flag |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
711 bra store_dive_data5 |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
712 movff char_I_const_ppO2,WREG ; SetPoint in cBar |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
713 call write_external_eeprom |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
714 bcf setpoint_changed ; Clear this event |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
715 |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
716 store_dive_data5: |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
717 bcf event_occured ; Clear the global event flag |
|
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
718 return ; Done. (Sample with all informations written to EEPROM) |
| 0 | 719 |
| 720 store_dive_nuy2: | |
| 721 GETCUSTOM8 d'26' | |
| 722 movwf divisor_nuy2 ; Reload divisor from CF | |
| 723 return | |
| 724 | |
| 725 store_dive_decodebug: | |
| 171 | 726 ; Dump 9 bytes, int_O_DBS_bitfield .. char_O_NDL_at_20mtr |
| 727 lfsr FSR2, int_O_DBS_bitfield | |
| 728 movf POSTINC2,W | |
| 0 | 729 call write_external_eeprom ; Store in EEPROM |
| 171 | 730 movf POSTINC2,W |
| 0 | 731 call write_external_eeprom ; Store in EEPROM |
| 171 | 732 movf POSTINC2,W |
| 733 call write_external_eeprom ; Store in EEPROM | |
| 734 movf POSTINC2,W | |
| 0 | 735 call write_external_eeprom ; Store in EEPROM |
| 171 | 736 movf POSTINC2,W |
| 0 | 737 call write_external_eeprom ; Store in EEPROM |
| 171 | 738 movf POSTINC2,W |
| 0 | 739 call write_external_eeprom ; Store in EEPROM |
| 171 | 740 movf POSTINC2,W |
| 0 | 741 call write_external_eeprom ; Store in EEPROM |
| 171 | 742 movf POSTINC2,W |
| 0 | 743 call write_external_eeprom ; Store in EEPROM |
| 171 | 744 movf POSTINC2,W |
| 0 | 745 call write_external_eeprom ; Store in EEPROM |
| 746 GETCUSTOM8 d'25' | |
| 747 movwf divisor_deco_debug ; Reload divisor from CF | |
| 748 return | |
| 749 | |
| 750 store_dive_ppo2: | |
| 751 movlw 0x00 ; Dummy | |
| 752 call write_external_eeprom | |
| 753 movlw 0x00 ; Dummy | |
| 754 call write_external_eeprom | |
| 755 movlw 0x00 ; Dummy | |
| 756 call write_external_eeprom | |
| 757 GETCUSTOM8 d'24' | |
| 758 movwf divisor_ppo2 ; Reload divisor from CF | |
| 759 return | |
| 760 | |
| 761 store_dive_tankdata: | |
| 762 movlw d'0' ; Dummy Tank1 | |
| 763 call write_external_eeprom | |
| 764 movlw d'0' ; Dummy Tank2 | |
| 765 call write_external_eeprom | |
| 766 GETCUSTOM8 d'23' | |
| 767 movwf divisor_tank ; Reload divisor from CF | |
| 768 return | |
| 769 | |
| 770 store_dive_decodata: | |
| 771 movf decodata+0,W ; =0:no stop dive, if in deco mode: ceiling in m | |
| 772 call write_external_eeprom | |
| 773 movf decodata+1,W ; no stop time of length of first stop | |
| 774 call write_external_eeprom | |
| 775 GETCUSTOM8 d'22' | |
| 776 movwf divisor_deco ; Reload divisor from CF | |
| 777 return | |
| 778 | |
| 779 store_dive_temperature: | |
| 780 movf temperature+0,W ; append temperature to current sample! | |
| 781 call write_external_eeprom | |
| 782 movf temperature+1,W | |
| 783 call write_external_eeprom | |
| 784 GETCUSTOM8 d'21' | |
| 785 movwf divisor_temperature ; Reload divisor from CF | |
| 786 return | |
| 787 | |
| 788 calc_velocity: ; called every two seconds | |
| 789 btfss divemode | |
| 790 bra do_not_display_velocity ; display velocity only in divemode | |
| 791 | |
| 792 calc_velocity2: | |
| 793 movff amb_pressure+0,sub_a+0 | |
| 794 movff amb_pressure+1,sub_a+1 | |
| 795 movff last_pressure+0,sub_b+0 | |
| 796 movff last_pressure+1,sub_b+1 | |
| 797 movff amb_pressure+0,last_pressure+0 ; store old value for velocity | |
| 798 movff amb_pressure+1,last_pressure+1 | |
| 799 | |
| 800 call sub16 ; sub_c = amb_pressure - last_pressure | |
| 801 | |
| 802 movff sub_c+0,xA+0 | |
| 803 movff sub_c+1,xA+1 | |
| 804 movlw d'39' ;77 when called every second.... | |
| 805 movwf xB+0 | |
| 806 clrf xB+1 | |
| 807 call mult16x16 ; differential pressure in mBar*77... | |
| 808 movff xC+0,divA+0 | |
| 809 movff xC+1,divA+1 | |
| 810 movlw d'7' | |
| 811 movwf divB | |
| 812 call div16 ; devided by 2^7 equals velocity in m/min | |
| 813 | |
| 814 movlw d'99' | |
| 815 cpfsgt divA | |
| 816 bra calc_velocity3 | |
| 817 movwf divA ; divA=99 | |
| 818 | |
| 819 calc_velocity3: | |
| 820 | |
| 821 GETCUSTOM8 d'5' ; threshold for display vertical velocity | |
| 822 subwf divA+0,W ; | |
| 823 | |
| 824 btfss STATUS,C | |
| 825 bra do_not_display_velocity | |
| 826 | |
| 827 update_velocity: | |
| 828 bsf display_velocity | |
| 829 call PLED_display_velocity | |
| 830 return | |
| 831 | |
| 832 do_not_display_velocity: | |
| 833 btfss display_velocity ; Velocity was not displayed, do not delete | |
| 834 return | |
| 835 | |
| 836 bcf display_velocity ; Velocity was displayed, delete velocity now | |
| 837 call PLED_display_velocity_clear | |
| 838 return | |
| 839 | |
| 237 | 840 check_ppO2: ; check current ppO2 and display warning if required |
| 841 btfsc FLAG_const_ppO2_mode ; ignore in ppO2 mode.... | |
| 0 | 842 return |
| 843 | |
| 3 | 844 check_ppO2_bail: ; In CC mode but bailout active! |
| 0 | 845 movff amb_pressure+0,xA+0 |
| 846 movff amb_pressure+1,xA+1 | |
| 847 movlw d'10' | |
| 848 movwf xB+0 | |
| 849 clrf xB+1 | |
| 850 call div16x16 ; xC=p_amb/10 | |
| 851 movff xC+0,xA+0 | |
| 852 movff xC+1,xA+1 | |
| 853 movff char_I_O2_ratio,xB+0 | |
| 854 clrf xB+1 | |
| 855 call mult16x16 ; char_I_O2_ratio * p_amb/10 | |
| 856 | |
| 74 | 857 ; Check very high ppO2 manually |
| 858 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55Bar? | |
| 859 bra check_ppO2_bail2 ; Yes, display Value! | |
| 860 | |
| 0 | 861 ; Check if ppO2 should be displayed |
| 862 movff xC+0,sub_b+0 | |
| 863 movff xC+1,sub_b+1 | |
| 864 GETCUSTOM8 d'19' ; ppo2_display_high | |
| 865 mullw d'100' ; ppo2_display_high*100 | |
| 866 movff PRODL,sub_a+0 | |
| 867 movff PRODH,sub_a+1 | |
| 868 call sub16 | |
| 869 bcf ppO2_show_value ; clear flag | |
| 870 btfsc neg_flag | |
| 871 bsf ppO2_show_value ; set flag if required | |
| 872 | |
| 873 ;check if we are within our warning thresholds! | |
| 874 bcf ppO2_warn_value ; clear flag | |
| 875 movff xC+0,sub_b+0 | |
| 876 movff xC+1,sub_b+1 | |
| 877 GETCUSTOM8 d'18' ; ppo2_warning_high | |
| 878 mullw d'100' ; ppo2_warning_high*100 | |
| 879 movff PRODL,sub_a+0 | |
| 880 movff PRODH,sub_a+1 | |
| 881 call sub16 | |
| 882 btfss neg_flag | |
| 883 bra check_ppO2_0 ; Not too high | |
| 884 | |
| 74 | 885 check_ppO2_bail2: |
| 886 bsf ppO2_show_value ; set flag if required | |
| 0 | 887 bsf ppO2_warn_value ; set flag |
| 888 movlw d'5' ; Type of Alarm | |
| 889 movwf AlarmType ; Copy to Alarm Register | |
| 890 bsf event_occured ; Set Event Flag | |
| 891 | |
| 892 check_ppO2_0: | |
| 893 movff xC+0,sub_b+0 | |
| 894 movff xC+1,sub_b+1 | |
| 210 | 895 GETCUSTOM8 d'17' ; ppo2_warning_low |
| 896 mullw d'100' ; ppo2_warning_low*100 | |
| 0 | 897 movff PRODL,sub_a+0 |
| 898 movff PRODH,sub_a+1 | |
| 899 call sub16 | |
| 900 btfsc neg_flag | |
| 901 bra check_ppO2_1 ; Not too low | |
| 902 | |
| 903 bsf ppO2_warn_value ; set flag | |
| 904 bsf ppO2_show_value ; show ppO2 if below threshold! | |
| 905 movlw d'4' ; Type of Alarm | |
| 906 movwf AlarmType ; Copy to Alarm Register | |
| 907 bsf event_occured ; Set Event Flag | |
| 908 | |
| 909 check_ppO2_1: | |
| 910 btfsc ppO2_show_value ; show value? | |
| 911 bra check_ppO2_2 ; yes! | |
| 912 | |
| 913 btfss ppO2_display_active ; is the value displayed? | |
| 914 bra check_ppO2_3 ; No, so clear not required | |
| 915 | |
| 916 call PLED_show_ppO2_clear; Clear ppO2 value | |
| 917 bcf ppO2_display_active ; clear flag | |
| 918 bra check_ppO2_3 ; done | |
| 919 | |
| 920 check_ppO2_2: | |
| 921 call PLED_show_ppO2 ; Display ppO2 (stored in xC) | |
| 922 bsf ppO2_display_active ; Set flag | |
| 923 | |
| 924 check_ppO2_3: | |
| 925 return ; done | |
| 926 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
927 ;============================================================================= |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
928 ; Compare all enabled gas in list, to see if a better one is available. |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
929 ; |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
930 ; Output: better_gas_available |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
931 ; |
| 210 | 932 check_gas_change: ; Checks if a better gas should be selected (by user) |
| 8 | 933 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 934 | |
| 935 movff rel_pressure+0,xA+0 | |
| 936 movff rel_pressure+1,xA+1 | |
| 937 movlw d'100' | |
| 938 movwf xB+0 | |
| 939 clrf xB+1 | |
| 940 call div16x16 ; compute depth in full m -> result in xC+0 | |
| 941 | |
| 942 check_gas_change1: ; check gas1 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
943 btfss gaslist_active,0 ; check active flag |
| 8 | 944 bra check_gas_change2 ; skip inactive gases! |
| 945 movlw d'1' | |
| 946 cpfseq active_gas ; is this gas currently selected? | |
| 947 bra check_gas_change1x ; No... | |
| 948 bra check_gas_change2 ; Yes, skip depth check | |
| 949 check_gas_change1x: | |
| 950 read_int_eeprom d'28' ; read gas_change_depth | |
| 951 movlw d'3' | |
| 952 cpfsgt EEDATA ; Change depth>3m? | |
| 953 bra check_gas_change2 ; No, Change depth not deep enough, skip! | |
| 954 movf xC+0,W ; load depth in m into WREG | |
| 955 cpfsgt EEDATA ; gas_change_depth < current depth? | |
| 956 bra check_gas_change2 ; No, check next gas | |
| 957 movlw d'3' | |
| 958 subwf EEDATA,W ; Change depth-3m | |
| 959 cpfslt xC+0 ; current depth<Change depth-3m? | |
| 960 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 961 | |
| 962 check_gas_change2: ; check gas2 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
963 btfss gaslist_active,1 ; check active flag |
| 8 | 964 bra check_gas_change3 ; skip inactive gases! |
| 965 movlw d'2' | |
| 966 cpfseq active_gas ; is this gas currently selected? | |
| 967 bra check_gas_change2x ; No... | |
| 968 bra check_gas_change3 ; Yes, skip depth check | |
| 969 check_gas_change2x: | |
| 970 read_int_eeprom d'29' ; read gas_change_depth | |
| 971 movlw d'3' | |
| 972 cpfsgt EEDATA ; Change depth>3m? | |
| 973 bra check_gas_change3 ; No, Change depth not deep enough, skip! | |
| 974 movf xC+0,W ; load depth in m into WREG | |
| 975 cpfsgt EEDATA ; gas_change_depth < current depth? | |
| 976 bra check_gas_change3 ; No, check next gas | |
| 977 movlw d'3' | |
| 978 subwf EEDATA,W ; Change depth-3m | |
| 979 cpfslt xC+0 ; current depth<Change depth-3m? | |
| 980 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 981 | |
| 982 check_gas_change3: ; check gas3 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
983 btfss gaslist_active,2 ; check active flag |
| 8 | 984 bra check_gas_change4 ; skip inactive gases! |
| 985 movlw d'3' | |
| 986 cpfseq active_gas ; is this gas currently selected? | |
| 987 bra check_gas_change3x ; No... | |
| 988 bra check_gas_change4 ; Yes, skip depth check | |
| 989 check_gas_change3x: | |
| 990 read_int_eeprom d'30' ; read gas_change_depth | |
| 991 movlw d'3' | |
| 992 cpfsgt EEDATA ; Change depth>3m? | |
| 993 bra check_gas_change4 ; No, Change depth not deep enough, skip! | |
| 994 movf xC+0,W ; load depth in m into WREG | |
| 995 cpfsgt EEDATA ; gas_change_depth < current depth? | |
| 996 bra check_gas_change4 ; No, check next gas | |
| 997 movlw d'3' | |
| 998 subwf EEDATA,W ; Change depth-3m | |
| 999 cpfslt xC+0 ; current depth<Change depth-3m? | |
| 1000 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1001 | |
| 1002 check_gas_change4: ; check gas4 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1003 btfss gaslist_active,3 ; check active flag |
| 8 | 1004 bra check_gas_change5 ; skip inactive gases! |
| 1005 movlw d'4' | |
| 1006 cpfseq active_gas ; is this gas currently selected? | |
| 1007 bra check_gas_change4x ; No... | |
| 1008 bra check_gas_change5 ; Yes, skip depth check | |
| 1009 check_gas_change4x: | |
| 1010 read_int_eeprom d'31' ; read gas_change_depth | |
|
179
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
171
diff
changeset
|
1011 movlw d'3' |
| 8 | 1012 cpfsgt EEDATA ; Change depth>3m? |
| 1013 bra check_gas_change5 ; No, Change depth not deep enough, skip! | |
| 1014 movf xC+0,W ; load depth in m into WREG | |
| 1015 cpfsgt EEDATA ; gas_change_depth < current depth? | |
| 1016 bra check_gas_change5 ; No, check next gas | |
| 1017 movlw d'3' | |
| 1018 subwf EEDATA,W ; Change depth-3m | |
| 1019 cpfslt xC+0 ; current depth<Change depth-3m? | |
| 1020 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1021 | |
| 1022 check_gas_change5: ; check gas5 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1023 btfss gaslist_active,4 ; check active flag |
| 8 | 1024 bra check_gas_change6 ; skip inactive gases! |
| 1025 movlw d'5' | |
| 1026 cpfseq active_gas ; is this gas currently selected? | |
| 1027 bra check_gas_change5x ; No... | |
| 1028 bra check_gas_change6 ; Yes, skip depth check | |
| 1029 check_gas_change5x: | |
| 1030 read_int_eeprom d'32' ; read gas_change_depth | |
|
179
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
171
diff
changeset
|
1031 movlw d'3' |
| 8 | 1032 cpfsgt EEDATA ; Change depth>3m? |
| 1033 bra check_gas_change6 ; No, Change depth not deep enough, skip! | |
| 1034 movf xC+0,W ; load depth in m into WREG | |
| 1035 cpfsgt EEDATA ; gas_change_depth < current depth? | |
| 1036 bra check_gas_change6 ; No, check next gas | |
| 1037 movlw d'3' | |
| 1038 subwf EEDATA,W ; Change depth-3m | |
| 1039 cpfslt xC+0 ; current depth<Change depth-3m? | |
| 1040 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1041 | |
| 1042 check_gas_change6: ;Done | |
| 210 | 1043 call PLED_active_gas_divemode; Display gas, if required (and with "*" if irequired...) |
| 8 | 1044 return |
| 1045 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1046 ;============================================================================= |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1047 |
| 0 | 1048 calculate_noflytime: |
| 1049 ; calculate nofly time | |
| 1050 movff int_O_desaturation_time+0,xA+0 | |
| 1051 movff int_O_desaturation_time+1,xA+1 | |
| 251 | 1052 |
| 1053 btfsc xA+1,7 ; Is desat time negatif ? | |
| 1054 bra calculate_noflytime_3 ; Then surely not valid ! | |
| 1055 | |
| 0 | 1056 tstfsz xA+0 ; Desat=0? |
| 1057 bra calculate_noflytime2 | |
| 1058 tstfsz xA+1 ; Desat=0? | |
| 1059 bra calculate_noflytime2 | |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1060 |
|
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1061 calculate_noflytime_3: |
| 0 | 1062 ; Desaturation time = zero |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1063 clrf nofly_time+0 ; Clear nofly time |
| 0 | 1064 clrf nofly_time+1 ; Clear nofly time |
| 1065 bcf nofly_active ; Clear flag | |
| 1066 return | |
| 218 | 1067 |
| 0 | 1068 calculate_noflytime2: |
| 1069 movff xA+0,int_I_temp+0 | |
| 1070 movff xA+1,int_I_temp+1 | |
| 1071 GETCUSTOM8 .13 ; nofly_time_ratio | |
| 218 | 1072 movff WREG,char_I_temp |
| 0 | 1073 ostc_debug 'K' ; Sends debug-information to screen if debugmode active |
| 116 | 1074 call deco_calc_percentage |
| 0 | 1075 movlb b'00000001' ; select ram bank 1 |
| 1076 ostc_debug 'L' ; Sends debug-information to screen if debugmode active | |
| 1077 movff int_I_temp+0,xA+0 | |
| 1078 movff int_I_temp+1,xA+1 | |
| 1079 tstfsz xA+0 ; Desat=0? | |
| 1080 bra calculate_noflytime_2_final | |
| 1081 tstfsz xA+1 ; Desat=0? | |
| 1082 bra calculate_noflytime_2_final | |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1083 bra calculate_noflytime_3 |
|
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1084 |
| 0 | 1085 calculate_noflytime_2_final: |
| 1086 movff xA+0,nofly_time+0 | |
| 1087 movff xA+1,nofly_time+1 | |
| 1088 bsf nofly_active ; Set flag | |
| 1089 return | |
| 1090 | |
| 1091 end_dive: | |
| 1092 btfss realdive ; dive longer then one minute | |
| 1093 goto end_dive_common ; No, discard everything | |
| 1094 | |
| 233 | 1095 ; In DEBUG compile, keep all simulated dives in logbook, Desat time, nofly, etc... |
| 1096 ifndef __DEBUG | |
| 1097 btfsc simulatormode_active ; Are we in simulator mode? | |
| 1098 goto end_dive_common ; Yes, discard everything | |
| 1099 endif | |
| 33 | 1100 |
|
83
3e351e25f5d1
adding anti-aliased fonts frame and merging some patches from Jeando
heinrichsweikamp
parents:
75
diff
changeset
|
1101 ; Dive finished (and longer then one minute or Apnoe timeout occured) |
| 0 | 1102 |
| 1103 btfsc FLAG_apnoe_mode ; Calc max. depth (again) for very short apnoe dives | |
| 1104 rcall apnoe_calc_maxdepth | |
| 1105 | |
| 1106 ; calculate desaturation time | |
| 251 | 1107 movff last_surfpressure_30min+0,int_I_pres_surface+0 ; Pass surface to desat routine ! |
| 1108 movff last_surfpressure_30min+1,int_I_pres_surface+1 | |
| 0 | 1109 |
| 251 | 1110 GETCUSTOM8 d'12' ; Desaturation multiplier % |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1111 movff WREG,char_I_desaturation_multiplier |
| 0 | 1112 |
| 1113 ostc_debug 'G' ; Sends debug-information to screen if debugmode active | |
| 251 | 1114 call deco_calc_desaturation_time ; calculate desaturation time |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1115 movlb b'00000001' ; select ram bank 1 |
|
257
f8f869bafd92
Use timer TMR3 to limit loops in calc_hauptroutine_calc_deco()
JeanDo
parents:
256
diff
changeset
|
1116 call calc_deko_surfmode ; work-around for nofly bug |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1117 rcall calculate_noflytime ; Calc NoFly time |
|
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1118 ostc_debug 'H' ; Sends debug-information to screen if debugmode active |
| 0 | 1119 ; store header and ... |
| 1120 movlw 0xFD ; .... End-of-Profile Bytes | |
| 1121 call write_external_eeprom | |
| 1122 movlw 0xFD | |
| 1123 call write_external_eeprom | |
| 1124 movlw 0xFE ; This positon will be overwritten for the next profile | |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1125 call write_external_eeprom ; and is required to find the newest dive after a firmware reset |
| 0 | 1126 |
| 1127 movff eeprom_header_address+0, eeprom_address+0 ; set header adress | |
| 1128 movff eeprom_header_address+1, eeprom_address+1 ; write header | |
| 1129 | |
| 1130 movlw 0xFA ; Header start | |
| 1131 call write_external_eeprom | |
| 1132 movlw 0xFA | |
| 1133 call write_external_eeprom | |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1134 movlw logbook_profile_version ; Defined in definitions_vxyy.asm |
| 0 | 1135 call write_external_eeprom |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
1136 movf month,W ; Date |
| 0 | 1137 call write_external_eeprom |
| 1138 movf day,W | |
| 1139 call write_external_eeprom | |
| 1140 movf year,W | |
| 1141 call write_external_eeprom | |
| 1142 movf hours,W ; End of dive time | |
| 1143 call write_external_eeprom | |
| 1144 movf mins,W | |
| 1145 call write_external_eeprom | |
| 1146 | |
| 1147 btfss FLAG_apnoe_mode ; Store apnoe max or normal max (Which is only max from the last descent) | |
| 1148 bra end_dive1 ; Store normal depth | |
| 1149 | |
| 1150 movff apnoe_max_pressure+0,lo | |
| 1151 movff apnoe_max_pressure+1,hi | |
| 1152 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mBar] | |
| 1153 movff lo,apnoe_max_pressure+0 | |
| 1154 movff hi,apnoe_max_pressure+1 | |
| 1155 | |
| 1156 movf apnoe_max_pressure+0,W ; Max. depth | |
| 1157 call write_external_eeprom | |
| 1158 movf apnoe_max_pressure+1,W | |
| 1159 call write_external_eeprom | |
| 1160 bra end_dive2 ; skip | |
| 1161 | |
| 1162 end_dive1: | |
| 1163 movff max_pressure+0,lo | |
| 1164 movff max_pressure+1,hi | |
| 1165 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mBar] | |
| 1166 movff lo,max_pressure+0 | |
| 1167 movff hi,max_pressure+1 | |
| 1168 | |
| 1169 movf max_pressure+0,W ; Max. depth | |
| 1170 call write_external_eeprom | |
| 1171 movf max_pressure+1,W | |
| 1172 call write_external_eeprom | |
| 1173 | |
| 1174 end_dive2: | |
| 1175 movf divemins+0,W ; divetime minutes | |
| 1176 call write_external_eeprom | |
| 1177 movf divemins+1,W | |
| 1178 call write_external_eeprom | |
| 1179 movf divesecs,W ; divetime seconds | |
| 1180 call write_external_eeprom | |
| 1181 movf mintemp+0,W ; minimum temperature | |
| 1182 call write_external_eeprom | |
| 1183 movf mintemp+1,W | |
| 1184 call write_external_eeprom | |
| 1185 movf last_surfpressure_30min+0,W ; airpressure before dive | |
| 1186 call write_external_eeprom | |
| 1187 movf last_surfpressure_30min+1,W | |
| 1188 call write_external_eeprom | |
| 1189 movff int_O_desaturation_time+0,lo ; | |
| 1190 movff int_O_desaturation_time+1,hi | |
| 1191 movf lo,W ; desaturation time in minutes | |
| 1192 call write_external_eeprom | |
| 1193 movf hi,W ; | |
| 1194 call write_external_eeprom | |
| 1195 | |
| 1196 ; Gases.... | |
| 1197 read_int_eeprom d'6' ; Read byte (stored in EEDATA) | |
| 1198 movf EEDATA,W | |
| 1199 call write_external_eeprom | |
| 1200 read_int_eeprom d'7' ; Read byte (stored in EEDATA) | |
| 1201 movf EEDATA,W | |
| 1202 call write_external_eeprom | |
| 1203 | |
| 1204 read_int_eeprom d'10' ; Read byte (stored in EEDATA) | |
| 1205 movf EEDATA,W | |
| 1206 call write_external_eeprom | |
| 1207 read_int_eeprom d'11' ; Read byte (stored in EEDATA) | |
| 1208 movf EEDATA,W | |
| 1209 call write_external_eeprom | |
| 1210 | |
| 1211 read_int_eeprom d'14' ; Read byte (stored in EEDATA) | |
| 1212 movf EEDATA,W | |
| 1213 call write_external_eeprom | |
| 1214 read_int_eeprom d'15' ; Read byte (stored in EEDATA) | |
| 1215 movf EEDATA,W | |
| 1216 call write_external_eeprom | |
| 1217 | |
| 1218 read_int_eeprom d'18' ; Read byte (stored in EEDATA) | |
| 1219 movf EEDATA,W | |
| 1220 call write_external_eeprom | |
| 1221 read_int_eeprom d'19' ; Read byte (stored in EEDATA) | |
| 1222 movf EEDATA,W | |
| 1223 call write_external_eeprom | |
| 1224 | |
| 1225 read_int_eeprom d'22' ; Read byte (stored in EEDATA) | |
| 1226 movf EEDATA,W | |
| 1227 call write_external_eeprom | |
| 1228 read_int_eeprom d'23' ; Read byte (stored in EEDATA) | |
| 1229 movf EEDATA,W | |
| 1230 call write_external_eeprom | |
| 1231 | |
| 1232 read_int_eeprom d'24' ; % O2 Gas6 | |
| 1233 movf EEDATA,W | |
| 1234 call write_external_eeprom | |
| 1235 read_int_eeprom d'25' ; % He Gas6 | |
| 1236 movf EEDATA,W | |
| 1237 call write_external_eeprom | |
| 1238 read_int_eeprom d'33' ; start gas | |
| 1239 movf EEDATA,W | |
| 1240 call write_external_eeprom | |
| 1241 | |
| 1242 movlw softwareversion_x ; Firmware version | |
| 1243 call write_external_eeprom | |
| 1244 movlw softwareversion_y | |
| 1245 call write_external_eeprom | |
| 1246 movf batt_voltage+0,W ; Battery voltage | |
| 1247 call write_external_eeprom | |
| 1248 movf batt_voltage+1,W | |
| 1249 call write_external_eeprom | |
| 1250 | |
| 1251 GETCUSTOM8 d'20' ; sampling rate in WREG | |
| 1252 btfsc FLAG_apnoe_mode ; Apnoe mode? | |
| 1253 movlw d'1' ; Apnoe sampling rate | |
| 1254 call write_external_eeprom | |
| 1255 | |
| 1256 movlw d'2' ; information size temperature | |
| 1257 movwf temp1 ; copy to bits 0-3 | |
| 1258 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1259 GETCUSTOM8 d'21' ; Divisor temperature | |
| 1260 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1261 call write_external_eeprom | |
| 1262 | |
| 1263 movlw d'2' ; information size deco | |
| 1264 movwf temp1 ; copy to bits 0-3 | |
| 1265 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1266 GETCUSTOM8 d'22' ; Divisor deco | |
| 1267 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1268 call write_external_eeprom | |
| 1269 | |
| 1270 movlw d'2' ; information size tank | |
| 1271 movwf temp1 ; copy to bits 0-3 | |
| 1272 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1273 GETCUSTOM8 d'23' ; Divisor Tank | |
| 1274 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1275 call write_external_eeprom | |
| 1276 | |
| 1277 movlw d'3' ; information size pp02 | |
| 1278 movwf temp1 ; copy to bits 0-3 | |
| 1279 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1280 GETCUSTOM8 d'24' ; Divisor pp02 | |
| 1281 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1282 call write_external_eeprom | |
| 1283 | |
| 1284 movlw d'9' ; information size Decodebug | |
| 1285 movwf temp1 ; copy to bits 0-3 | |
| 1286 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1287 GETCUSTOM8 d'25' ; Divisor Decodebug | |
| 1288 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1289 call write_external_eeprom | |
| 1290 | |
| 1291 movlw d'0' ; information size nuy2 | |
| 1292 movwf temp1 ; copy to bits 0-3 | |
| 1293 swapf temp1,F ; swap nibbels 0-3 with 4-7 | |
| 1294 GETCUSTOM8 d'26' ; Divisor nuy2 | |
| 1295 addwf temp1,W ; copy to bits 0-3, result in WREG | |
| 1296 call write_external_eeprom | |
| 1297 | |
| 1298 read_int_eeprom d'26' ; Read Salinity from EEPROM | |
| 1299 movf EEDATA,W | |
| 1300 call write_external_eeprom ; Store Salinity to Dive | |
|
253
3a4096f32526
show CNS in logbook for all dives made with V1.84beta and later
heinrichsweikamp
parents:
251
diff
changeset
|
1301 |
|
3a4096f32526
show CNS in logbook for all dives made with V1.84beta and later
heinrichsweikamp
parents:
251
diff
changeset
|
1302 movff char_O_CNS_fraction,WREG ; copy into bank1 |
|
3a4096f32526
show CNS in logbook for all dives made with V1.84beta and later
heinrichsweikamp
parents:
251
diff
changeset
|
1303 call write_external_eeprom ; Stores CNS% |
| 0 | 1304 |
| 1305 movlw 0xFB ; Header stop | |
| 1306 call write_external_eeprom | |
| 1307 movlw 0xFB | |
| 1308 call write_external_eeprom | |
| 1309 | |
| 1310 ; Increase total dive counter | |
| 1311 read_int_eeprom d'2' ; Read byte (stored in EEDATA) | |
| 1312 movff EEDATA,temp1 ; Low byte | |
| 1313 read_int_eeprom d'3' ; Read byte (stored in EEDATA) | |
| 1314 movff EEDATA,temp2 ; high byte | |
| 1315 bcf STATUS,C | |
| 1316 movlw d'1' | |
| 1317 addwf temp1 | |
| 1318 movlw d'0' | |
| 1319 addwfc temp2 | |
| 1320 movff temp1,EEDATA | |
| 1321 write_int_eeprom d'2' ; write byte stored in EEDATA | |
| 1322 movff temp2,EEDATA | |
| 1323 write_int_eeprom d'3' ; write byte stored in EEDATA | |
| 1324 | |
| 1325 GETCUSTOM15 .28 ; Logbook Offset -> lo, hi | |
| 1326 tstfsz lo ; lo=0? | |
| 1327 bra change_logbook_offset1 ; No, adjust offset | |
| 1328 tstfsz hi ; hi=0? | |
| 1329 bra change_logbook_offset1 ; No, adjust offset | |
| 1330 bra change_logbook_offset2 ; lo=0 and hi=0 -> skip Offset routine | |
| 1331 change_logbook_offset1: | |
| 1332 movlw d'1' | |
| 1333 addwf lo | |
| 1334 movlw d'0' | |
| 1335 addwfc hi | |
| 1336 movlw d'112' ; CF28 *4 Bytes... | |
| 1337 addlw 0x82 | |
| 1338 movwf EEADR | |
| 1339 movff lo,EEDATA | |
| 1340 call write_eeprom ; Lowbyte | |
| 1341 movlw d'112' ; CF28 *4 Bytes... | |
| 1342 addlw 0x83 | |
| 1343 movwf EEADR | |
| 1344 movff hi,EEDATA | |
| 1345 call write_eeprom ; Highbyte | |
| 1346 | |
| 1347 change_logbook_offset2: | |
| 25 | 1348 bcf LED_blue |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1349 clrf surface_interval+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1350 clrf surface_interval+1 ; Clear surface interval timer |
| 33 | 1351 |
| 1352 end_dive_common: | |
| 0 | 1353 bcf simulatormode_active ; if we were in simulator mode |
| 1354 | |
| 1355 btfsc restore_deco_data ; Restore decodata? | |
| 1356 call simulator_restore_tissue_data ; Yes! | |
| 1357 | |
| 1358 goto surfloop ; and return to surfaceloop | |
| 1359 | |
| 1360 timeout_divemode: | |
| 1361 btfss realdive ; Dive longer then one minute | |
| 1362 return | |
| 1363 | |
| 1364 btfsc FLAG_apnoe_mode ; In Apnoe mode? | |
| 1365 bra timeout_divemode2 ; Yes, use CF30 [min] for timeout | |
| 1366 | |
| 233 | 1367 ifndef __DEBUG |
| 1368 btfsc simulatormode_active ; In Simulator mode? | |
| 1369 bra timeout_divemode3 ; Yes, use fixed 5 seconds timeout | |
| 1370 endif | |
| 0 | 1371 |
| 1372 bcf divemode | |
| 1373 incf timeout_counter,F | |
| 1374 GETCUSTOM8 d'2' ; diveloop_timeout | |
| 1375 addlw d'2' ; adds two seconds in case timout=zero! | |
| 1376 btfsc STATUS,C ; > 255? | |
| 1377 movlw d'255' ; Set to 255... | |
| 1378 decf WREG,F ; Limit to 254 | |
| 1379 cpfsgt timeout_counter | |
| 1380 bsf divemode | |
| 1381 return | |
| 1382 | |
| 1383 timeout_divemode2: | |
| 1384 incf timeout_counter,F ; seconds... | |
| 1385 movlw d'60' | |
| 1386 cpfseq timeout_counter ; timeout_counter=60? | |
| 1387 return ; No. | |
| 1388 | |
| 1389 clrf timeout_counter | |
| 1390 bcf divemode | |
| 1391 incf apnoe_timeout_counter,F | |
| 1392 GETCUSTOM8 d'30' ; apnoe timeout [min] | |
| 1393 cpfseq apnoe_timeout_counter | |
| 1394 bsf divemode | |
| 1395 return | |
| 1396 | |
| 1397 timeout_divemode3: | |
| 1398 bcf divemode | |
| 1399 incf timeout_counter,F | |
| 1400 movlw d'5' ; Fixed timeout of 5 seconds | |
| 1401 cpfsgt timeout_counter | |
| 1402 bsf divemode | |
| 1403 return | |
| 1404 | |
| 1405 update_divemode1: ; update any second | |
| 1406 call set_dive_modes ; tests if depth>threshold | |
| 1407 | |
| 1408 btfsc divemode | |
| 1409 call set_max_depth ; update max. depth if required | |
| 1410 | |
| 1411 btfsc divemode | |
| 1412 call set_min_temp ; store min. temp if required | |
| 1413 | |
| 1414 bcf temp_changed ; Display temperature? | |
| 1415 movf temperature+0,W | |
| 1416 cpfseq last_temperature+0 | |
| 1417 bsf temp_changed ; Yes | |
| 1418 movf temperature+1,W | |
| 1419 cpfseq last_temperature+1 | |
| 1420 bsf temp_changed ; Yes | |
| 1421 btfsc temp_changed | |
| 1422 call PLED_temp_divemode ; Displays temperature | |
| 1423 | |
| 1424 bcf pres_changed ; Display new depth? | |
| 1425 movf amb_pressure+0,W | |
| 1426 cpfseq last_pressure+0 | |
| 1427 bsf pres_changed ; Yes | |
| 1428 movf amb_pressure+1,W | |
| 1429 cpfseq last_pressure+1 | |
| 1430 bsf pres_changed ; Yes | |
| 1431 | |
| 1432 btfsc simulatormode_active ; always update depth when in simulator mode | |
| 1433 bsf pres_changed | |
| 1434 | |
| 1435 btfsc pres_changed | |
| 1436 call PLED_depth ; Displays new depth | |
| 1437 return | |
| 1438 | |
| 1439 update_divemode60: ; update any minute | |
| 1440 call get_battery_voltage ; gets battery voltage | |
| 1441 call set_powersafe ; red LED blinking if battery is low | |
| 1442 call PLED_max_pressure ; No, use normal max. depth | |
| 1443 call check_temp_extrema ; check for new temperature extremas | |
|
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
1444 call customview_minute ; Do every-minute tasks for the custom view area |
| 0 | 1445 bcf oneminupdate |
| 1446 return | |
| 1447 | |
| 1448 set_max_depth: | |
| 1449 movff max_pressure+0,sub_a+0 | |
| 1450 movff max_pressure+1,sub_a+1 | |
| 1451 movff rel_pressure+0,sub_b+0 | |
| 1452 movff rel_pressure+1,sub_b+1 | |
| 1453 call sub16 ; sub_c = sub_a - sub_b | |
| 1454 ; max_pressure<rel_pressure -> neg_flag=1 | |
| 1455 ; rel_pressure<=max_pressure -> neg_flag=0 | |
| 1456 btfss neg_flag | |
| 1457 return | |
| 1458 ;max_pressure<rel_pressure | |
| 1459 movff rel_pressure+0,max_pressure+0 | |
| 1460 movff rel_pressure+1,max_pressure+1 | |
| 1461 call PLED_max_pressure ; No, use normal max. depth | |
| 1462 return | |
| 1463 | |
| 1464 set_min_temp: | |
| 1465 movff mintemp+0,sub_a+0 | |
| 1466 movff mintemp+1,sub_a+1 | |
| 1467 movff temperature+0,sub_b+0 | |
| 1468 movff temperature+1,sub_b+1 | |
| 1469 call sub16 ; sub_c = sub_a - sub_b | |
| 1470 ; mintemp<T -> neg_flag=1 | |
| 1471 ; T<=mintemp -> neg_flag=0 | |
| 1472 btfsc neg_flag | |
| 1473 return | |
| 1474 ;mintemp>=T | |
| 1475 movff temperature+0,mintemp+0 | |
| 1476 movff temperature+1,mintemp+1 | |
| 1477 return | |
| 1478 | |
| 1479 set_dive_modes: | |
| 239 | 1480 btfsc high_altitude_mode ; In high altitude (Fly) mode? |
| 1481 bra set_dive_modes3 ; Yes | |
| 1482 | |
| 0 | 1483 bcf divemode2 ; Stop time |
| 1484 | |
| 1485 GETCUSTOM8 .0 ; loads dive_threshold in WREG | |
| 1486 movwf sub_a+0 ; dive_treshold is in cm | |
| 1487 clrf sub_a+1 | |
| 1488 movff rel_pressure+0,sub_b+0 | |
| 1489 movff rel_pressure+1,sub_b+1 | |
| 239 | 1490 call sub16 ; sub_c = sub_a - sub_b |
| 0 | 1491 |
| 1492 btfss neg_flag | |
| 239 | 1493 bra set_dive_modes2 ; too shallow (rel_pressure<dive_threshold) |
| 0 | 1494 |
| 239 | 1495 btfsc realdive ; Dive longer than one minute? |
| 1496 clrf timeout_counter ; Yes, reset timout counter | |
| 0 | 1497 |
| 239 | 1498 bsf divemode ; (Re-)Set divemode flag |
| 0 | 1499 bsf divemode2 ; displayed divetime is running |
| 1500 return | |
| 1501 | |
| 1502 set_dive_modes2: | |
| 1503 btfss realdive ; dive longer then one minute? | |
| 1504 bcf divemode ; no -> this was no real dive | |
| 1505 return | |
| 1506 | |
| 239 | 1507 set_dive_modes3: |
| 1508 movlw HIGH d'1075' ; hard-wired 1075mBar threshold | |
| 1509 movwf sub_a+1 | |
| 1510 movlw LOW d'1075' ; hard-wired 1075mBar threshold | |
| 1511 movwf sub_a+0 | |
| 1512 movff rel_pressure+0,sub_b+0 | |
| 1513 movff rel_pressure+1,sub_b+1 | |
| 1514 call sub16 ; sub_c = sub_a - sub_b | |
| 1515 | |
| 1516 btfss neg_flag | |
| 1517 bra set_dive_modes2 ; too shallow (rel_pressure<dive_threshold) | |
| 1518 | |
| 1519 bsf divemode ; (Re-)Set divemode flag | |
| 1520 bsf divemode2 ; displayed divetime is running | |
| 1521 return | |
| 1522 | |
| 0 | 1523 set_powersafe: |
| 1524 btfsc low_battery_state ; battery warning alread active? | |
| 1525 bra set_powersafe2 ; Yes, but is it still required? | |
| 1526 ; battery voltage in mV (value*256+Lowbyte=actual treshold) | |
| 1527 movlw d'12' ; 3,328V | |
| 1528 cpfsgt batt_voltage+1 | |
| 1529 bra set_powersafe1 | |
| 1530 return | |
| 1531 | |
| 1532 set_powersafe1: | |
| 1533 movlw d'7' ; Type of Alarm (Battery Low) | |
| 1534 movwf AlarmType ; Copy to Alarm Register | |
| 1535 bsf event_occured ; Set Event Flag | |
| 1536 bsf low_battery_state ; set flag for battery warning | |
| 1537 return ; return | |
| 1538 | |
| 1539 set_powersafe2: | |
| 1540 movlw d'13' ; 3,584V | |
| 1541 cpfsgt batt_voltage+1 | |
| 1542 bra set_powersafe1 ; Still to low | |
| 1543 bcf low_battery_state ; clear flag for battery warning mode | |
| 1544 return | |
| 1545 | |
| 1546 calc_average_depth: | |
| 111 | 1547 btfsc reset_average_depth ; Reset the Avewrage depth? |
| 1548 rcall reset_average1 ; Reset the resettable average depth | |
| 1549 | |
| 0 | 1550 ; 1. Add new 2xdepth to the Sum of depths registers |
| 1551 movff rel_pressure+0,b0_lo | |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1552 movff rel_pressure+1,b0_hi ; Buffer... |
| 0 | 1553 |
| 1554 movf b0_lo,w | |
| 1555 addwf average_depth_hold+0,F | |
| 1556 movf b0_hi,w | |
| 1557 addwfc average_depth_hold+1,F | |
| 1558 movlw d'0' | |
| 1559 addwfc average_depth_hold+2,F | |
| 1560 addwfc average_depth_hold+3,F ; Will work up to 9999mBar*60*60*24=863913600mBar | |
| 1561 | |
| 1562 movf b0_lo,w | |
| 1563 addwf average_depth_hold+0,F | |
| 1564 movf b0_hi,w | |
| 1565 addwfc average_depth_hold+1,F | |
| 1566 movlw d'0' | |
| 1567 addwfc average_depth_hold+2,F | |
| 1568 addwfc average_depth_hold+3,F ; Will work up to 9999mBar*60*60*24=863913600mBar | |
| 1569 | |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1570 ; Do the same for the _total registers (Non-Resettable) |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1571 movf b0_lo,w |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1572 addwf average_depth_hold_total+0,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1573 movf b0_hi,w |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1574 addwfc average_depth_hold_total+1,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1575 movlw d'0' |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1576 addwfc average_depth_hold_total+2,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1577 addwfc average_depth_hold_total+3,F ; Will work up to 9999mBar*60*60*24=863913600mBar |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1578 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1579 movf b0_lo,w |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1580 addwf average_depth_hold_total+0,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1581 movf b0_hi,w |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1582 addwfc average_depth_hold_total+1,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1583 movlw d'0' |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1584 addwfc average_depth_hold_total+2,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1585 addwfc average_depth_hold_total+3,F ; Will work up to 9999mBar*60*60*24=863913600mBar |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1586 |
| 0 | 1587 ; 2. Compute Average Depth on base of average_divesecs:2 |
| 1588 movff average_divesecs+0,xB+0 | |
| 1589 movff average_divesecs+1,xB+1 ; Copy | |
| 1590 movff average_depth_hold+0,xC+0 | |
| 1591 movff average_depth_hold+1,xC+1 | |
| 1592 movff average_depth_hold+2,xC+2 | |
| 1593 movff average_depth_hold+3,xC+3 | |
| 1594 | |
| 1595 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 1596 movff xC+0,avr_rel_pressure+0 | |
| 1597 movff xC+1,avr_rel_pressure+1 | |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1598 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1599 ; Compute Total Average Depth on base of divemins:2 and divesecs |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1600 movff divemins+0,xA+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1601 movff divemins+1,xA+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1602 movlw d'60' |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1603 movwf xB+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1604 clrf xB+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1605 call mult16x16 ; xC:4=xA:2*xB:2 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1606 movf divesecs,W |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1607 addwf xC+0,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1608 movlw d'0' |
| 228 | 1609 addwfc xC+1,F ; xC:2 holds total dive seconds |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1610 movlw d'3' ; 2+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1611 btfss divesecs,0 ; divesecs even? |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1612 movlw d'2' ; Yes, do not add +1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1613 addwf xC+0,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1614 movlw d'0' |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1615 addwfc xC+1,F |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1616 ; Ignore xC+2 and xC+3. Total Average will only work up to divetime=1092:16 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1617 movff xC+0,xB+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1618 movff xC+1,xB+1 ; Copy |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1619 movff average_depth_hold_total+0,xC+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1620 movff average_depth_hold_total+1,xC+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1621 movff average_depth_hold_total+2,xC+2 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1622 movff average_depth_hold_total+3,xC+3 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1623 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1624 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1625 movff xC+0,avr_rel_pressure_total+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1626 movff xC+1,avr_rel_pressure_total+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1627 |
| 0 | 1628 return |
| 1629 | |
| 111 | 1630 reset_average1: |
| 1631 clrf average_depth_hold+0 | |
| 1632 clrf average_depth_hold+1 | |
| 1633 clrf average_depth_hold+2 | |
| 1634 clrf average_depth_hold+3 ; Clear average depth register | |
| 1635 movlw d'2' | |
| 1636 movwf average_divesecs+0 | |
| 1637 clrf average_divesecs+1 | |
| 1638 bcf reset_average_depth ; Clear flag | |
| 1639 return | |
| 0 | 1640 |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1641 ;============================================================================= |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1642 ; Setup everything to enter divemode. |
|
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1643 ; |
| 0 | 1644 diveloop_boot: |
| 49 | 1645 ostc_debug 'Q' ; Sends debug-information to screen if debugmode active |
| 0 | 1646 clrf max_pressure+0 ; clear some variables |
| 1647 clrf max_pressure+1 | |
| 1648 | |
| 1649 clrf avr_rel_pressure+0 | |
| 1650 clrf avr_rel_pressure+1 | |
| 1651 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1652 clrf EEADRH ; Make sure to select eeprom bank 0 |
| 0 | 1653 call PLED_brightness_low |
| 1654 read_int_eeprom d'90' ; Brightness offset? (Dim>0, Normal = 0) | |
| 1655 movlw d'0' | |
| 1656 cpfsgt EEDATA | |
| 1657 call PLED_brightness_full | |
| 1658 | |
| 1659 movlw d'1' | |
| 1660 movwf apnoe_max_pressure+0 | |
| 1661 clrf apnoe_max_pressure+1 | |
| 1662 clrf apnoe_surface_mins | |
| 1663 clrf apnoe_surface_secs | |
| 1664 clrf apnoe_mins | |
| 1665 clrf apnoe_secs | |
| 1666 clrf divemins+0 | |
| 1667 clrf divemins+1 | |
|
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
1668 clrf menupos3 |
|
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
83
diff
changeset
|
1669 bcf menu3_active |
| 0 | 1670 clrf divesecs |
| 1671 clrf samplesecs | |
| 1672 clrf apnoe_timeout_counter ; timeout in minutes | |
| 1673 clrf timeout_counter ; takes care of the timeout | |
| 1674 clrf timeout_counter2 ; Here: counts to six, then store deco data and temperature | |
| 1675 clrf AlarmType ; Clear all alarms | |
| 1676 bcf event_occured ; clear flag | |
|
274
a728b4a1b660
Setpoint changes stored in profile, EAD and END displayed in divemode (Customview 7)
heinrichsweikamp
parents:
263
diff
changeset
|
1677 bcf setpoint_changed ; clear flag |
| 111 | 1678 rcall reset_average1 ; Reset the resettable average depth |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1679 clrf average_depth_hold_total+0 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1680 clrf average_depth_hold_total+1 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1681 clrf average_depth_hold_total+2 |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
124
diff
changeset
|
1682 clrf average_depth_hold_total+3 ; Clear Non-Resettable Average |
| 0 | 1683 bcf depth_greater_100m ; clear flag |
| 1684 setf last_diluent ; to be displayed after first calculation (range: 0 to 100 [%]) | |
| 3 | 1685 bcf dekostop_active |
| 1686 bcf is_bailout ;=1: CC mode, but bailout active! | |
| 8 | 1687 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 1688 | |
| 0 | 1689 call get_free_EEPROM_location ; get last position in external EEPROM, may be up to 2 secs! |
| 1690 | |
| 237 | 1691 btfss simulatormode_active |
| 1692 bra diveloop_boot_1 | |
| 1693 ; Normal mode = Surface pressure is the pressure 30mn before dive. | |
| 0 | 1694 movff last_surfpressure_30min+0,int_I_pres_surface+0 ; LOW copy surfacepressure to deco routine |
| 237 | 1695 movff last_surfpressure_30min+1,int_I_pres_surface+1 ; HIGH copy surfacepressure to deco routine |
| 1696 bra diveloop_boot_2 | |
| 1697 | |
| 1698 diveloop_boot_1: | |
| 1699 ; Simulator mode: Surface pressure is 1bar. | |
| 1700 movlw LOW .1000 | |
| 1701 movff WREG,int_I_pres_surface+0 ; LOW copy surfacepressure to deco routine | |
| 1702 movlw HIGH .1000 | |
| 1703 movff WREG,int_I_pres_surface+1 ; HIGH copy surfacepressure to deco routine | |
| 1704 | |
| 1705 diveloop_boot_2: | |
| 1706 movff temperature+0,mintemp+0 ; Reset Min-Temp registers | |
| 1707 movff temperature+1,mintemp+1 ; Reset Min-Temp registers | |
| 0 | 1708 |
| 1709 ; Init profile recording parameters | |
| 237 | 1710 GETCUSTOM8 d'20' ; sample rate |
| 1711 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
| 0 | 1712 GETCUSTOM8 d'21' |
| 237 | 1713 movwf divisor_temperature ; load divisors for profile storage |
| 0 | 1714 GETCUSTOM8 d'22' |
| 1715 movwf divisor_deco | |
| 1716 GETCUSTOM8 d'23' | |
| 1717 movwf divisor_tank | |
| 1718 GETCUSTOM8 d'24' | |
| 1719 movwf divisor_ppo2 | |
| 1720 GETCUSTOM8 d'25' | |
| 1721 movwf divisor_deco_debug | |
| 1722 GETCUSTOM8 d'26' | |
| 1723 movwf divisor_nuy2 | |
| 1724 | |
| 1725 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
| 1726 bra divemode1 | |
| 1727 ; Overwrite some parameters in Apnoe mode.... | |
| 1728 movlw d'1' | |
| 1729 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
| 1730 | |
| 1731 divemode1: | |
| 1732 read_int_eeprom d'36' ; Read mix 1 ppO2 | |
| 1733 btfsc FLAG_const_ppO2_mode | |
| 292 | 1734 movff EEDATA,char_I_const_ppO2 ; Set ppO2 setpoint if in ppO2 mode |
| 1735 movff EEDATA,ppO2_setpoint_store ; Store also in this byte... | |
| 0 | 1736 |
| 21 | 1737 bcf LED_blue |
| 0 | 1738 bcf low_battery_state ; clear flag for battery warning mode |
| 1739 bcf header_stored | |
| 1740 bcf premenu | |
| 1741 bcf realdive | |
| 1742 bsf update_divetime ; set flag | |
| 1743 btfss simulatormode_active ; do not disable in simulator mode! | |
| 49 | 1744 call disable_rs232 ; Disable RS232 |
| 0 | 1745 |
| 292 | 1746 ; Read Start Gas and configure char_I_He_ratio, char_I_O2_ratio and char_I_N2_ratio |
| 1747 set_first_gas: | |
| 0 | 1748 read_int_eeprom d'33' ; Read byte (stored in EEDATA) |
| 1749 movff EEDATA,active_gas ; Read start gas (1-5) | |
| 1750 | |
| 1751 decf active_gas,W ; Gas 0-4 | |
| 1752 mullw d'4' | |
| 1753 movf PRODL,W | |
| 1754 addlw d'7' ; = address for He ratio | |
| 1755 movwf EEADR | |
| 1756 call read_eeprom ; Read He ratio | |
| 1757 movff EEDATA,char_I_He_ratio ; And copy into hold register | |
| 292 | 1758 |
| 1759 decf EEADR,F | |
| 0 | 1760 call read_eeprom ; Read O2 ratio |
| 1761 movff EEDATA, char_I_O2_ratio ; O2 ratio | |
| 292 | 1762 |
| 0 | 1763 movff char_I_He_ratio, wait_temp ; copy into bank1 register |
| 1764 bsf STATUS,C ; Borrow bit | |
| 1765 movlw d'100' ; 100% | |
| 1766 subfwb wait_temp,W ; minus He | |
| 1767 bsf STATUS,C ; Borrow bit | |
| 1768 subfwb EEDATA,F ; minus O2 | |
| 1769 movff EEDATA, char_I_N2_ratio ; = N2! | |
| 1770 | |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1771 ; Configure gaslist_active flag register |
| 281 | 1772 read_int_eeprom d'27' |
|
290
4dbff2aa31ee
Hunting for refusing to ignore disabled gas in list...
JeanDo
parents:
287
diff
changeset
|
1773 movff EEDATA, gaslist_active |
| 281 | 1774 return |