Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/changelog.txt @ 467:59ff7a1aa1cb 2.01stable
show firmware version in logbook correctly
| author | heinrichsweikamp |
|---|---|
| date | Mon, 03 Oct 2011 09:36:53 +0200 |
| parents | 993e681e89cf |
| children | 7779bfa89171 |
| rev | line source |
|---|---|
| 457 | 1 New in 2.01 beta: |
| 2 BUGFIX: No decodata in logbook for apnea dives | |
| 3 | |
| 456 | 4 New in 2.00 Stable: |
| 5 Stable release | |
| 6 BUGFIX: Fixing 32kB boundary read for logbook | |
| 7 | |
| 451 | 8 New in 1.98 beta: |
| 9 BUGFIX bad first Tp° and ceiling values in logbook curves. | |
| 10 | |
| 450 | 11 New in 1.97 beta: |
| 430 | 12 NEW: Logbook displays ceilings and temperature curve. |
|
439
b9cf06de8aca
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)
JeanDo
parents:
430
diff
changeset
|
13 BUGFIX: Decoplanner accumulates CNS during ascent. |
|
441
4826dd98514b
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
JeanDo
parents:
440
diff
changeset
|
14 NEW: Decoplanner warns in red if CNS is too high. |
|
4826dd98514b
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
JeanDo
parents:
440
diff
changeset
|
15 NEW: Decoplanner OC volumes in liters (or bars), up to 65000. |
| 450 | 16 NEW: Released also in Russian language |
| 17 BUGFIX: SetPoint store in Profile | |
| 430 | 18 |
| 418 | 19 New in 1.95 beta: |
|
419
e671d2018e0f
0.98bar equal 10m depths with salinity set to 1.00kg/l
heinrichsweikamp
parents:
418
diff
changeset
|
20 CHANGE: 0.98bar equal 10m depths with salinity set to 1.00kg/l |
| 418 | 21 |
| 412 | 22 New in 1.94 beta: |
| 418 | 23 Pre-Release for 2.0 Stable |
| 412 | 24 BUGFIX: CNS was not cleared with a "Reset Deco" |
|
415
d022c62a1df5
fixing issue with end-of-dive threshold in high-altitude mode
heinrichsweikamp
parents:
412
diff
changeset
|
25 CHANGE: Max. depth for simulator now 120m |
|
d022c62a1df5
fixing issue with end-of-dive threshold in high-altitude mode
heinrichsweikamp
parents:
412
diff
changeset
|
26 BUGFIX: Ascend threshold in high altitude mode |
| 412 | 27 |
| 407 | 28 New in 1.93 beta: |
| 29 BETA Version - Do NOT use for diving! | |
| 30 BUGFIX: blinking fixed setpoint if actual setpoint lower then physically possible | |
| 31 BUGFIX: SetPoint recording for logbook | |
| 32 BUGFIX: Divetime seconds synced with stopwatch start | |
|
408
3e0192f6c241
NEW: End-of-Dive countdown displayed after surfacing
heinrichsweikamp
parents:
407
diff
changeset
|
33 NEW: End-of-Dive countdown displayed after surfacing |
| 407 | 34 |
| 393 | 35 New in 1.92 beta: |
| 36 BETA Version - Do NOT use for diving! | |
|
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
37 BUGFIX: warning color for ppO2>3,3bar and ppO2<6,55bar fixed |
| 405 | 38 BUGFIX: Start SetPoint is attached to first depth sample in logbook profile |
| 39 BUGFIX: Simulator menu collided with descent counter in Apnea mode | |
| 40 BUGFIX: Display hypoxic air in divemode (bug #41) | |
| 41 CHANGE: Gas change indication is displayed in yellow | |
| 393 | 42 |
| 347 | 43 New in 1.91 beta: |
| 44 BETA Version - Do NOT use for diving! | |
| 45 BUGFIX: Ignore depths>130m in PC simulation | |
| 360 | 46 BUGFIX: Avoid spurious CF55 stops with 3 gas or more |
| 361 | 47 BUGFIX: Average depth in Logbook (For dives made with >=1.91) |
| 383 | 48 BUGFIX: Logbook time scale (squares are 10min * 10m) |
| 49 BUGFIX: Bühlmann half-times rounded to the minute | |
| 50 BUGFIX: Protect again rare race contition on pressure/temperature | |
| 392 | 51 BUGFIX: Time is now accurate |
|
352
544a96faa9f3
New "Quit sim" option in simulated dive mode, CF02 now allows more then 240seconds, Bugfix with runtime=1min in runtime simulator
Heinrichsweikamp
parents:
347
diff
changeset
|
52 CHANGE: CF02 now allows delay of more then 240seconds |
| 383 | 53 CHANGE: First gas do not reset change depth |
| 54 CHANGE: Logbook format 21: store & shows dive model (sat/desat or GF_low/high factors), | |
| 55 CNS profile, GF profile. | |
| 56 WARNING: the upgrade is not reversible without loosing all your profiles. | |
|
352
544a96faa9f3
New "Quit sim" option in simulated dive mode, CF02 now allows more then 240seconds, Bugfix with runtime=1min in runtime simulator
Heinrichsweikamp
parents:
347
diff
changeset
|
57 NEW: "Quit Sim" in divemode simulator menu for exiting the simulation |
| 360 | 58 NEW: Allow -2:00 to +2:00 adjustement per day (CF48). |
| 59 NEW: 1/10/100 steps in CF menu | |
|
357
562f1bc79f3c
Bugfix: Wake-up into divemode with 1.91alpha
Heinrichsweikamp
parents:
352
diff
changeset
|
60 NEW: 64kByte Logbook (Doubled capacity compared to 1.90) |
| 383 | 61 NEW: Additional dive interval for simulator and decoplaning |
| 62 NEW: Negative temperatures in logbook and battery information menu | |
| 63 NEW: Screen dump support | |
| 347 | 64 |
| 65 New in 1.90 Stable: | |
| 66 Stable release | |
| 67 | |
| 324 | 68 New in 1.89 beta: |
| 69 BETA Version - Do NOT use for diving! | |
| 70 NEW: ppO2 in case of a loop flush can be displayed in CCR mode | |
|
325
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
71 NEW: Fixed Setpoint with color warnings |
|
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
72 BUGFIX: Fixed Setpoint behavior >2,55bar with CF38=ON |
|
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
73 NEW: Future TTS also available in no-deco phase of dive |
| 324 | 74 |
| 309 | 75 New in 1.88 beta: |
| 76 BETA Version - Do NOT use for diving! | |
| 77 CHANGE: CF warning window moved to upper right corner | |
| 324 | 78 BUGFIX: Gas4 fixed |
| 79 NEW: Future TTS (@xx Variant) in Custom View (Divemode) | |
| 80 NEW: CF58 (0-10 min): Computes Future TTS in xx min | |
| 309 | 81 |
| 273 | 82 New in 1.87 beta: |
| 83 BETA Version - Do NOT use for diving! | |
| 281 | 84 CHANGE: Runtime simulator faster |
| 85 BUGFIX: "Active?" list in Divemode | |
| 292 | 86 NEW: Display CNS in decoplan |
| 87 NEW: Colored stops in decoplan (CF55 > 0) | |
| 298 | 88 NEW: 115kbaud/s bootloader |
| 307 | 89 NEW: Colored battery sign when charging (yellow) or charged (green) |
| 298 | 90 CHANGE: Battery symbol filled |
| 296 | 91 BUGFIX: Apply salinity for ceiling warning |
| 307 | 92 CHANGE: Gas Setup page 2 reworked (MOD depth default) |
| 298 | 93 BUGFIX: x-scale in Logbook fixed |
| 94 CHANGE: Some typos in English text | |
| 301 | 95 NEW: Display ppO2[Diluent] in CCR modes |
| 307 | 96 NEW: Display EAD/END in OCR and CCR modes |
| 273 | 97 |
|
267
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
98 New in 1.86 beta: |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
99 BETA Version - Do NOT use for diving! |
| 268 | 100 BUGFIX: Average depth in Logbook fixed |
| 273 | 101 BUGFIX: Stand-alone simulator |
|
267
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
102 |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
103 New in 1.85 beta: |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
104 BETA Version - Do NOT use for diving! |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
105 BUGFIX: zero gas rate (bug bb28) |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
106 BUGFIX: Safer rounding (bug bb29) |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
107 CHANGE: making the seconds display in divemode smoother |
|
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
108 |
| 228 | 109 New in 1.84 beta: |
| 110 BETA Version - Do NOT use for diving! | |
|
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
111 BUGFIX: NoFly time should not be reseted after dive simulation. |
| 239 | 112 NEW: High altitude (Plane/Fly) mode added |
|
253
3a4096f32526
show CNS in logbook for all dives made with V1.84beta and later
heinrichsweikamp
parents:
249
diff
changeset
|
113 NEW: Gaslist, Salinity, CNS and Average depth displayed in Logbook |
|
248
571626276aaa
Logbook now shows gas changes in depth profile
heinrichsweikamp
parents:
245
diff
changeset
|
114 NEW: Internal logbook shows Gas changes |
| 249 | 115 NEW: Release in French, Spain, English and German (Use correct HEX file!) |
|
255
1efd59d689f8
small change in the set time menu, default setpoints set to 0.8, 1.0 and 1.2Bar
heinrichsweikamp
parents:
253
diff
changeset
|
116 CHANGE: Set Time menu |
|
245
dee88c962653
Some clean up and minor I2C speed improvements
heinrichsweikamp
parents:
243
diff
changeset
|
117 |
|
219
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
118 New in 1.83 beta: |
|
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
119 BETA Version - Do NOT use for diving! |
|
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
120 BUGFIX: gas switch |
| 228 | 121 NEW: De/Activate gases underwater (Gaslist -> More -> Actve?) |
| 122 NEW: Gas Consumption caluculation in offline simulator (After Decoplan) | |
| 123 NEW: CF56 Bottom gas usage (l/min or bar/min) (For Simulator) | |
| 124 NEW: CF57 Ascent/deco gas usage (l/min or bar/min) (For Simulator) | |
|
219
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
125 |
| 206 | 126 New in 1.82 beta: |
| 127 BETA Version - Do NOT use for diving! | |
| 207 | 128 CHANGE: Speed optimization in Logbook |
|
209
cdba979821ee
frame around logbook scale, some more speed improvements
heinrichsweikamp
parents:
207
diff
changeset
|
129 NEW: Scale for Profile view in Logbook (10m,10min) |
| 206 | 130 |
| 160 | 131 New in 1.81 beta: |
| 156 | 132 BETA Version - Do NOT use for diving! |
| 206 | 133 NEW: Release in French, Spain and English (Use correct HEX file!) |
| 197 | 134 CHANGE: ZH-L16 display all stops (up to 96m), as ZH-L16-GF mode |
| 180 | 135 BUGFIX: Don't wrap TTS sum (still limit each stop display (not compute) to ~4h) |
| 136 NEW: CF54: =1:Display shallowest stop first (decoplan and divemode) | |
|
179
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
169
diff
changeset
|
137 BUGFIX: Inactive gases greyed-out in Simulator results |
|
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
169
diff
changeset
|
138 BUGFIX: "Better Gas" now works for Gas 4 and Gas 5, as well |
| 180 | 139 NEW: GF_lo and GF_hi stored in logbook |
| 197 | 140 BUGFIX: Gradient factor reworked |
| 141 NEW: CF55: Additional delay for gas switch (decoplan, includng divemode) | |
| 160 | 142 |
| 143 New in 1.80 Stable: | |
| 144 Stable release | |
| 156 | 145 BUGFIX: No Custom view in Surfacemode as default |
| 146 | |
| 139 | 147 New in 1.76 Beta: |
| 148 BETA Version - Do NOT use for diving! | |
| 140 | 149 NEW: "beta" is shown for beta versions |
| 150 CHANGE: NoFly and Desaturation time only visible when > 0 | |
| 141 | 151 CHANGE: "LowBatt!" Warning in Divemode |
| 139 | 152 |
| 115 | 153 New in 1.75 Beta: |
| 154 BETA Version - Do NOT use for diving! | |
| 155 BUGFIX: Decomask in Gauge mode removed | |
|
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
156 NEW: Decoplan rewritten, now has practically unlimited number of stops (OSTC MK.2 only) |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
157 NEW: Altimeter (OSTC MK.2 only) |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
158 BUGFIX: Timeout reset in Customview (OSTC MK.2 only) |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
159 BUGFIX: Surface Interval |
|
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
160 NEW: Non-Resettable Average Depth (OSTC MK.2 only) |
| 138 | 161 NEW: CF41: Mix Type Icons in Surfacemode (OSTC MK.2 only) |
| 162 NEW: CF49: Show Altimeter in Surfacemode (OSTC MK.2 only) | |
| 163 NEW: CF50: Show LogMarker in Divemode/Customview (OSTC MK.2 only) | |
| 164 NEW: CF51: Show Stopwatch in Divemode/Customview (OSTC MK.2 only) | |
| 165 NEW: CF52: Show Tissue Graph in Divemode/Customview (OSTC MK.2 only) | |
| 166 NEW: CF53: Show Leading Tissue in Divemode/Customview (OSTC MK.2 only) | |
| 167 NEW: CF39: Adjust fixed SetPoint if Diluent ppO2 > SetPoint (OSTC MK.2 only) | |
| 168 BUGFIX: Custom view for Apnoe mode disabled | |
| 169 BUGFIX: Custom view for Gauge mode adjusted | |
| 115 | 170 |
| 105 | 171 New in 1.74 Beta: |
| 172 BETA Version - Do NOT use for diving! | |
| 173 NEW: Added END (Equivalent narcotic depth) for GasSetup | |
| 111 | 174 CHANGE: Limits for several Custom Functions (OSTC MK.2 only) |
| 105 | 175 BUGFIX: Realtime Simulator menu |
| 111 | 176 NEW: Customview for Surfacemode (OSTC MK.2 only) |
| 177 NEW: Icon for Tank mix on Surface screen (OSTC MK.2 only) | |
| 178 BUGFIX: Stopwatch Reset | |
| 105 | 179 |
| 85 | 180 New in 1.73 Beta: |
| 181 BETA Version - Do NOT use for diving! | |
|
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
182 NEW: Anti-Alised fonts (OSTC MK.2 only) |
|
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
183 NEW: Removed CF39 - Clock moved into Customview area (OSTC Mk.2 only) |
|
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
184 NEW: Custom functions menu more comfortable (OSTC Mk.2 only) |
| 85 | 185 BUGFIX: Surface interval now correct for repetitive dives |
|
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
186 CHANGE: Changes in divemode layout (OSTC Mk.2 only) |
| 85 | 187 |
|
70
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
188 New in 1.72 Beta: |
|
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
189 BETA Version - Do NOT use for diving! |
|
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
190 BUGFIX: TTS display while decoplan is displayed |
|
71
6beb680a6130
1.72beta - color-coded gaslist, small fix with stopwatch
heinrichsweikamp
parents:
70
diff
changeset
|
191 CHANGE: Stopwatch reset is blocked for one second after divemode menu exit (OSTC Mk.2 Only) |
|
6beb680a6130
1.72beta - color-coded gaslist, small fix with stopwatch
heinrichsweikamp
parents:
70
diff
changeset
|
192 NEW: Gas list is color-coded in Color# Warnings if ppO2 of gas > CF18 (ppO2 High warning) (OSTC Mk.2 Only)) |
|
73
2227459e8ef2
Exchanged Decoplan and Gaslist in dive mode menu
heinrichsweikamp
parents:
71
diff
changeset
|
193 CHANGE: Exchanged "Gaslist" and "Decoplan" in Divemode menu |
| 74 | 194 BUGFIX: ppO2 warning for very high ppO2 levels |
|
70
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
195 |
| 62 | 196 New in 1.71 Beta: |
| 197 BETA Version - Do NOT use for diving! | |
| 198 BUGFIX: Custom text can be 23chars again | |
| 199 BUGFIX: Simulator descends to exact depth | |
| 63 | 200 NEW: Added CF39: =1 shows clock in divemode (OSTC Mk.2 only) |
| 64 | 201 BUGFIX: Surface Interval not afffected from Simulator |
| 68 | 202 CHANGE: "Decosum" changed to "TTS" (Time to Surface) |
| 203 NEW: Up to 16 Deco Stops are displayed in Divemode and Simulator (GF Modes only) | |
| 69 | 204 NEW: CF40 added (=1: Ceiling violation displayed in Color# Warnings (OSTC Mk.2 Only)) |
| 62 | 205 |
| 51 | 206 New in 1.70 Stable: |
| 207 Stable release | |
| 52 | 208 WARNING: This update will reset all Custom Functions! |
| 209 BUGFIX: Gas Changes for Simulator | |
| 51 | 210 |
| 45 | 211 New in 1.65 Beta: |
| 47 | 212 This is the 1.70 Stable release candidate |
| 45 | 213 BETA Version - Do NOT use for diving! |
| 214 CHANGE: Restored original Gas Setup | |
| 215 CHANGE: CF25 (Deco Debug) default to 0 | |
| 47 | 216 BUGFIX: Velocity warning (CF47) only for ascend |
| 45 | 217 |
| 42 | 218 New in 1.63 Beta: |
| 219 BETA Version - Do NOT use for diving! | |
| 43 | 220 CHANGE: CF15 defines threshold for CNS display in Surfacemode (OSTC MK.2 only) |
| 221 NEW: CF48 sets positive clock offset [seconds/24h], added at Midnight | |
| 44 | 222 BUGFIX: CNS restored after simulation |
| 42 | 223 |
| 30 | 224 New in 1.62 Beta: |
| 225 BETA Version - Do NOT use for diving! | |
| 226 CHANGE: More space around divemode-menu | |
| 33 | 227 CHANGE: Disabled "Delete Dive" in logbook |
| 228 CHANGE: Simulated dives are no longer stored in the logbook | |
| 229 NEW: Simulator is much faster now | |
| 34 | 230 NEW: New Simulation results screen |
| 37 | 231 BUGFIX: CF Warning displayed in Color# Warnings (OSTC Mk.2 only) |
| 232 NEW: Gas Setup sorts Gaslist | |
| 233 NEW: Deco Code uses all Gases for forecast | |
| 30 | 234 |
| 25 | 235 New in 1.61 Beta: |
| 236 BETA Version - Do NOT use for diving! | |
| 237 CHANGE: "Better Gas" now blinks more eye catching | |
| 238 CHANGE: Battery symbol range changed (OSTC Mk.2 Only) | |
| 239 NEW: Added CF37: Color# Warnings (OSTC Mk.2 Only) | |
| 29 | 240 NEW: Color# = 0,4,8,192,196 and 200 (Black or very dim) is ignored (OSTC Mk.2 Only) |
| 25 | 241 BUGFIX: History not updated in Simulator mode |
| 26 | 242 BUGFIX: Fixed-Setpoint (minimum) ppO2 limited to physically possible value |
|
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
243 NEW: Depth, CNS, GF, ppO2 and Velocity are Color-coded (OSTC Mk.2 Only) |
|
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
244 NEW: CF43: Depth [mbar] for color-code display (OSTC Mk.2 Only) |
|
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
245 NEW: CF44: CNS [%] for color-code display (OSTC Mk.2 Only) |
|
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
246 NEW: CF45: GF [%] for color-code display (OSTC Mk.2 Only) |
|
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
247 NEW: CF46: ppO2 [cbar] for color-code display (OSTC Mk.2 Only) |
|
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
248 NEW: CF47: Velocity [m/min] for color-code display (OSTC Mk.2 Only) |
|
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
249 CHANGE: Change of color layout (OSTC Mk.2 Only) |
| 25 | 250 |
| 21 | 251 New in 1.60 Stable: |
| 252 Stable release | |
| 253 | |
| 19 | 254 New in 1.56 Beta: |
| 255 BETA Version - Do NOT use for diving! | |
| 256 BUGFIX: Inactive Gases in Divemode greyed out (OSTC Mk.2 only) | |
| 257 NEW: Scale in Tissue Graph (OSTC Mk.2 only) | |
| 258 NEW: Leading Tissue percent is displayed in Tissue Graph (OSTC Mk.2 only) | |
| 259 NEW: Diluent is shown in Pre-Dive screen for CC modes | |
| 260 | |
| 17 | 261 New in 1.55 Beta: |
| 262 BETA Version - Do NOT use for diving! | |
| 263 CHANGE: Greyed out gases more readable | |
| 264 CHANGE: Removed "Delete All" from Logbook Menu | |
| 265 NEW: CF42=1: Active Gas will blink if a better gas is available | |
| 266 CHANGE: Returning from Bailout to CCR mode will not reset diluent gas | |
| 267 | |
| 16 | 268 New in 1.54 Beta: |
| 15 | 269 BETA Version - Do NOT use for diving! |
| 270 BUGFIX: Freeze at startup | |
| 271 | |
| 12 | 272 New in 1.53 Beta: |
| 273 BETA Version - Do NOT use for diving! | |
| 274 CHANGE: License moved into Menu | |
| 275 NEW: Quick power on | |
| 276 NEW: Not used O2 Sensors are not shown (OSTC1 only) | |
| 277 NEW: O2 Board is automatically selected when found within the 1st second in divemode (OSTC1 only) | |
| 13 | 278 NEW: Quick-View of Gaslist (Pre-Dive Check), press ENTER in Surfacemode |
| 12 | 279 |
| 4 | 280 New in 1.52 Beta: |
| 281 BETA Version - Do NOT use for diving! | |
| 282 NEW: Fixed-Setpoint ppO2 limited to physically possible value | |
| 7 | 283 BUGFIX: CF32 was displayed wrong on first call |
| 8 | 284 NEW: Gas change recommendation in divemode ('*' after Gas) |
| 285 CHANGE: "Const.ppO2 Setup" renamed to "CCR SetPoint Menu" | |
| 9 | 286 BUGFIX: CF35 now affects all items in surface and divemode |
| 11 | 287 NEW: CF36 sets Divemode mask color (OSTC Mk.2 only) |
| 10 | 288 BUGFIX: CF15 removed (OSTC Mk.2 only) |
| 4 | 289 |
| 2 | 290 New in 1.51 Beta: |
| 3 | 291 BETA Version - Do NOT use for diving! |
| 2 | 292 BUGFIX: PC Simulator mode |
| 3 | 293 NEW: CF35 sets standard color |
| 294 BUGFIX: Display startup at very cold ambient temperatures | |
| 295 BUGFIX: Battery voltage accuracy | |
| 296 BUGFIX: Temperature accuracy | |
| 297 BUGFIX: ppO2 is displayed in Bailout mode | |
| 2 | 298 |
| 0 | 299 New in 1.50 Stable: |
| 2 | 300 Initial release for OSTC Mk.2 |