Mercurial > public > mk2
annotate code_part1/OSTC_code_asm_part1/changelog.txt @ 483:0635fbb2fcf5
Tweaking gamma values
author | heinrichsweikamp |
---|---|
date | Thu, 13 Oct 2011 09:41:02 +0200 |
parents | fd8266b511cc |
children | 65850b513f1b |
rev | line source |
---|---|
476 | 1 New in 2.02 beta: |
2 NEW: Cave divers consomation display and alarm (CF59). | |
478
fd8266b511cc
New SAC (CF56/CF57) in 5..50 l/min range (no more decimal).
JeanDo
parents:
476
diff
changeset
|
3 CHANGE: SAC (CF56/CF57) in range 5..50 l/min (no more decimal). |
476 | 4 NEW: 32MhZ mode: computes twice faster. |
5 BUGFIX: Hang when deco table is full (more than 32 stops). | |
6 | |
457 | 7 New in 2.01 beta: |
8 BUGFIX: No decodata in logbook for apnea dives | |
9 | |
456 | 10 New in 2.00 Stable: |
11 Stable release | |
12 BUGFIX: Fixing 32kB boundary read for logbook | |
13 | |
451 | 14 New in 1.98 beta: |
15 BUGFIX bad first Tp° and ceiling values in logbook curves. | |
16 | |
450 | 17 New in 1.97 beta: |
430 | 18 NEW: Logbook displays ceilings and temperature curve. |
439
b9cf06de8aca
BUGFIX: Decoplanner accumulates CNS during ascent (bug #55)
JeanDo
parents:
430
diff
changeset
|
19 BUGFIX: Decoplanner accumulates CNS during ascent. |
441
4826dd98514b
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
JeanDo
parents:
440
diff
changeset
|
20 NEW: Decoplanner warns in red if CNS is too high. |
4826dd98514b
NEW: Decoplanner OC volumes in liters (or bars), up to 65000.
JeanDo
parents:
440
diff
changeset
|
21 NEW: Decoplanner OC volumes in liters (or bars), up to 65000. |
450 | 22 NEW: Released also in Russian language |
23 BUGFIX: SetPoint store in Profile | |
430 | 24 |
418 | 25 New in 1.95 beta: |
419
e671d2018e0f
0.98bar equal 10m depths with salinity set to 1.00kg/l
heinrichsweikamp
parents:
418
diff
changeset
|
26 CHANGE: 0.98bar equal 10m depths with salinity set to 1.00kg/l |
418 | 27 |
412 | 28 New in 1.94 beta: |
418 | 29 Pre-Release for 2.0 Stable |
412 | 30 BUGFIX: CNS was not cleared with a "Reset Deco" |
415
d022c62a1df5
fixing issue with end-of-dive threshold in high-altitude mode
heinrichsweikamp
parents:
412
diff
changeset
|
31 CHANGE: Max. depth for simulator now 120m |
d022c62a1df5
fixing issue with end-of-dive threshold in high-altitude mode
heinrichsweikamp
parents:
412
diff
changeset
|
32 BUGFIX: Ascend threshold in high altitude mode |
412 | 33 |
407 | 34 New in 1.93 beta: |
35 BETA Version - Do NOT use for diving! | |
36 BUGFIX: blinking fixed setpoint if actual setpoint lower then physically possible | |
37 BUGFIX: SetPoint recording for logbook | |
38 BUGFIX: Divetime seconds synced with stopwatch start | |
408
3e0192f6c241
NEW: End-of-Dive countdown displayed after surfacing
heinrichsweikamp
parents:
407
diff
changeset
|
39 NEW: End-of-Dive countdown displayed after surfacing |
407 | 40 |
393 | 41 New in 1.92 beta: |
42 BETA Version - Do NOT use for diving! | |
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
43 BUGFIX: warning color for ppO2>3,3bar and ppO2<6,55bar fixed |
405 | 44 BUGFIX: Start SetPoint is attached to first depth sample in logbook profile |
45 BUGFIX: Simulator menu collided with descent counter in Apnea mode | |
46 BUGFIX: Display hypoxic air in divemode (bug #41) | |
47 CHANGE: Gas change indication is displayed in yellow | |
393 | 48 |
347 | 49 New in 1.91 beta: |
50 BETA Version - Do NOT use for diving! | |
51 BUGFIX: Ignore depths>130m in PC simulation | |
360 | 52 BUGFIX: Avoid spurious CF55 stops with 3 gas or more |
361 | 53 BUGFIX: Average depth in Logbook (For dives made with >=1.91) |
383 | 54 BUGFIX: Logbook time scale (squares are 10min * 10m) |
55 BUGFIX: Bühlmann half-times rounded to the minute | |
56 BUGFIX: Protect again rare race contition on pressure/temperature | |
392 | 57 BUGFIX: Time is now accurate |
352
544a96faa9f3
New "Quit sim" option in simulated dive mode, CF02 now allows more then 240seconds, Bugfix with runtime=1min in runtime simulator
Heinrichsweikamp
parents:
347
diff
changeset
|
58 CHANGE: CF02 now allows delay of more then 240seconds |
383 | 59 CHANGE: First gas do not reset change depth |
60 CHANGE: Logbook format 21: store & shows dive model (sat/desat or GF_low/high factors), | |
61 CNS profile, GF profile. | |
62 WARNING: the upgrade is not reversible without loosing all your profiles. | |
352
544a96faa9f3
New "Quit sim" option in simulated dive mode, CF02 now allows more then 240seconds, Bugfix with runtime=1min in runtime simulator
Heinrichsweikamp
parents:
347
diff
changeset
|
63 NEW: "Quit Sim" in divemode simulator menu for exiting the simulation |
360 | 64 NEW: Allow -2:00 to +2:00 adjustement per day (CF48). |
65 NEW: 1/10/100 steps in CF menu | |
357
562f1bc79f3c
Bugfix: Wake-up into divemode with 1.91alpha
Heinrichsweikamp
parents:
352
diff
changeset
|
66 NEW: 64kByte Logbook (Doubled capacity compared to 1.90) |
383 | 67 NEW: Additional dive interval for simulator and decoplaning |
68 NEW: Negative temperatures in logbook and battery information menu | |
69 NEW: Screen dump support | |
347 | 70 |
71 New in 1.90 Stable: | |
72 Stable release | |
73 | |
324 | 74 New in 1.89 beta: |
75 BETA Version - Do NOT use for diving! | |
76 NEW: ppO2 in case of a loop flush can be displayed in CCR mode | |
325
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
77 NEW: Fixed Setpoint with color warnings |
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
78 BUGFIX: Fixed Setpoint behavior >2,55bar with CF38=ON |
4a28d7a1c620
Fixed Setpoint behavior >2,55bar with CF38=ON
heinrichsweikamp
parents:
324
diff
changeset
|
79 NEW: Future TTS also available in no-deco phase of dive |
324 | 80 |
309 | 81 New in 1.88 beta: |
82 BETA Version - Do NOT use for diving! | |
83 CHANGE: CF warning window moved to upper right corner | |
324 | 84 BUGFIX: Gas4 fixed |
85 NEW: Future TTS (@xx Variant) in Custom View (Divemode) | |
86 NEW: CF58 (0-10 min): Computes Future TTS in xx min | |
309 | 87 |
273 | 88 New in 1.87 beta: |
89 BETA Version - Do NOT use for diving! | |
281 | 90 CHANGE: Runtime simulator faster |
91 BUGFIX: "Active?" list in Divemode | |
292 | 92 NEW: Display CNS in decoplan |
93 NEW: Colored stops in decoplan (CF55 > 0) | |
298 | 94 NEW: 115kbaud/s bootloader |
307 | 95 NEW: Colored battery sign when charging (yellow) or charged (green) |
298 | 96 CHANGE: Battery symbol filled |
296 | 97 BUGFIX: Apply salinity for ceiling warning |
307 | 98 CHANGE: Gas Setup page 2 reworked (MOD depth default) |
298 | 99 BUGFIX: x-scale in Logbook fixed |
100 CHANGE: Some typos in English text | |
301 | 101 NEW: Display ppO2[Diluent] in CCR modes |
307 | 102 NEW: Display EAD/END in OCR and CCR modes |
273 | 103 |
267
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
104 New in 1.86 beta: |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
105 BETA Version - Do NOT use for diving! |
268 | 106 BUGFIX: Average depth in Logbook fixed |
273 | 107 BUGFIX: Stand-alone simulator |
267
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
108 |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
109 New in 1.85 beta: |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
110 BETA Version - Do NOT use for diving! |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
111 BUGFIX: zero gas rate (bug bb28) |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
112 BUGFIX: Safer rounding (bug bb29) |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
113 CHANGE: making the seconds display in divemode smoother |
814ac3af3052
1.85beta release, 1.86beta start, german texts updated
heinrichsweikamp
parents:
255
diff
changeset
|
114 |
228 | 115 New in 1.84 beta: |
116 BETA Version - Do NOT use for diving! | |
229
85ea09d3b9d8
Nofly should not be reset after dive simulation (bug BB18).
JeanDo
parents:
228
diff
changeset
|
117 BUGFIX: NoFly time should not be reseted after dive simulation. |
239 | 118 NEW: High altitude (Plane/Fly) mode added |
253
3a4096f32526
show CNS in logbook for all dives made with V1.84beta and later
heinrichsweikamp
parents:
249
diff
changeset
|
119 NEW: Gaslist, Salinity, CNS and Average depth displayed in Logbook |
248
571626276aaa
Logbook now shows gas changes in depth profile
heinrichsweikamp
parents:
245
diff
changeset
|
120 NEW: Internal logbook shows Gas changes |
249 | 121 NEW: Release in French, Spain, English and German (Use correct HEX file!) |
255
1efd59d689f8
small change in the set time menu, default setpoints set to 0.8, 1.0 and 1.2Bar
heinrichsweikamp
parents:
253
diff
changeset
|
122 CHANGE: Set Time menu |
245
dee88c962653
Some clean up and minor I2C speed improvements
heinrichsweikamp
parents:
243
diff
changeset
|
123 |
219
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
124 New in 1.83 beta: |
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
125 BETA Version - Do NOT use for diving! |
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
126 BUGFIX: gas switch |
228 | 127 NEW: De/Activate gases underwater (Gaslist -> More -> Actve?) |
128 NEW: Gas Consumption caluculation in offline simulator (After Decoplan) | |
129 NEW: CF56 Bottom gas usage (l/min or bar/min) (For Simulator) | |
130 NEW: CF57 Ascent/deco gas usage (l/min or bar/min) (For Simulator) | |
219
b6dd54b3567c
NEW: De/Activate gases underwater (Gaslist -> Gas6.. -> Actve?)
heinrichsweikamp
parents:
209
diff
changeset
|
131 |
206 | 132 New in 1.82 beta: |
133 BETA Version - Do NOT use for diving! | |
207 | 134 CHANGE: Speed optimization in Logbook |
209
cdba979821ee
frame around logbook scale, some more speed improvements
heinrichsweikamp
parents:
207
diff
changeset
|
135 NEW: Scale for Profile view in Logbook (10m,10min) |
206 | 136 |
160 | 137 New in 1.81 beta: |
156 | 138 BETA Version - Do NOT use for diving! |
206 | 139 NEW: Release in French, Spain and English (Use correct HEX file!) |
197 | 140 CHANGE: ZH-L16 display all stops (up to 96m), as ZH-L16-GF mode |
180 | 141 BUGFIX: Don't wrap TTS sum (still limit each stop display (not compute) to ~4h) |
142 NEW: CF54: =1:Display shallowest stop first (decoplan and divemode) | |
179
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
169
diff
changeset
|
143 BUGFIX: Inactive gases greyed-out in Simulator results |
77ab44108c07
BUGFIX: Inactive gases greyed-out in Simulator results
Heinrichsweikamp
parents:
169
diff
changeset
|
144 BUGFIX: "Better Gas" now works for Gas 4 and Gas 5, as well |
180 | 145 NEW: GF_lo and GF_hi stored in logbook |
197 | 146 BUGFIX: Gradient factor reworked |
147 NEW: CF55: Additional delay for gas switch (decoplan, includng divemode) | |
160 | 148 |
149 New in 1.80 Stable: | |
150 Stable release | |
156 | 151 BUGFIX: No Custom view in Surfacemode as default |
152 | |
139 | 153 New in 1.76 Beta: |
154 BETA Version - Do NOT use for diving! | |
140 | 155 NEW: "beta" is shown for beta versions |
156 CHANGE: NoFly and Desaturation time only visible when > 0 | |
141 | 157 CHANGE: "LowBatt!" Warning in Divemode |
139 | 158 |
115 | 159 New in 1.75 Beta: |
160 BETA Version - Do NOT use for diving! | |
161 BUGFIX: Decomask in Gauge mode removed | |
129
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
162 NEW: Decoplan rewritten, now has practically unlimited number of stops (OSTC MK.2 only) |
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
163 NEW: Altimeter (OSTC MK.2 only) |
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
164 BUGFIX: Timeout reset in Customview (OSTC MK.2 only) |
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
165 BUGFIX: Surface Interval |
06c4899ddb4b
Custom views in dive mode configrable (New CF50-CF53)
Heinrichsweikamp
parents:
115
diff
changeset
|
166 NEW: Non-Resettable Average Depth (OSTC MK.2 only) |
138 | 167 NEW: CF41: Mix Type Icons in Surfacemode (OSTC MK.2 only) |
168 NEW: CF49: Show Altimeter in Surfacemode (OSTC MK.2 only) | |
169 NEW: CF50: Show LogMarker in Divemode/Customview (OSTC MK.2 only) | |
170 NEW: CF51: Show Stopwatch in Divemode/Customview (OSTC MK.2 only) | |
171 NEW: CF52: Show Tissue Graph in Divemode/Customview (OSTC MK.2 only) | |
172 NEW: CF53: Show Leading Tissue in Divemode/Customview (OSTC MK.2 only) | |
173 NEW: CF39: Adjust fixed SetPoint if Diluent ppO2 > SetPoint (OSTC MK.2 only) | |
174 BUGFIX: Custom view for Apnoe mode disabled | |
175 BUGFIX: Custom view for Gauge mode adjusted | |
115 | 176 |
105 | 177 New in 1.74 Beta: |
178 BETA Version - Do NOT use for diving! | |
179 NEW: Added END (Equivalent narcotic depth) for GasSetup | |
111 | 180 CHANGE: Limits for several Custom Functions (OSTC MK.2 only) |
105 | 181 BUGFIX: Realtime Simulator menu |
111 | 182 NEW: Customview for Surfacemode (OSTC MK.2 only) |
183 NEW: Icon for Tank mix on Surface screen (OSTC MK.2 only) | |
184 BUGFIX: Stopwatch Reset | |
105 | 185 |
85 | 186 New in 1.73 Beta: |
187 BETA Version - Do NOT use for diving! | |
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
188 NEW: Anti-Alised fonts (OSTC MK.2 only) |
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
189 NEW: Removed CF39 - Clock moved into Customview area (OSTC Mk.2 only) |
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
190 NEW: Custom functions menu more comfortable (OSTC Mk.2 only) |
85 | 191 BUGFIX: Surface interval now correct for repetitive dives |
98
6f8e3a08011e
1.73beta rc1 (Added new customview for divemode)
heinrichsweikamp
parents:
85
diff
changeset
|
192 CHANGE: Changes in divemode layout (OSTC Mk.2 only) |
85 | 193 |
70
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
194 New in 1.72 Beta: |
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
195 BETA Version - Do NOT use for diving! |
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
196 BUGFIX: TTS display while decoplan is displayed |
71
6beb680a6130
1.72beta - color-coded gaslist, small fix with stopwatch
heinrichsweikamp
parents:
70
diff
changeset
|
197 CHANGE: Stopwatch reset is blocked for one second after divemode menu exit (OSTC Mk.2 Only) |
6beb680a6130
1.72beta - color-coded gaslist, small fix with stopwatch
heinrichsweikamp
parents:
70
diff
changeset
|
198 NEW: Gas list is color-coded in Color# Warnings if ppO2 of gas > CF18 (ppO2 High warning) (OSTC Mk.2 Only)) |
73
2227459e8ef2
Exchanged Decoplan and Gaslist in dive mode menu
heinrichsweikamp
parents:
71
diff
changeset
|
199 CHANGE: Exchanged "Gaslist" and "Decoplan" in Divemode menu |
74 | 200 BUGFIX: ppO2 warning for very high ppO2 levels |
70
8d8e753d72e3
1.72beta - small output fix in non-GF modes
heinrichsweikamp
parents:
69
diff
changeset
|
201 |
62 | 202 New in 1.71 Beta: |
203 BETA Version - Do NOT use for diving! | |
204 BUGFIX: Custom text can be 23chars again | |
205 BUGFIX: Simulator descends to exact depth | |
63 | 206 NEW: Added CF39: =1 shows clock in divemode (OSTC Mk.2 only) |
64 | 207 BUGFIX: Surface Interval not afffected from Simulator |
68 | 208 CHANGE: "Decosum" changed to "TTS" (Time to Surface) |
209 NEW: Up to 16 Deco Stops are displayed in Divemode and Simulator (GF Modes only) | |
69 | 210 NEW: CF40 added (=1: Ceiling violation displayed in Color# Warnings (OSTC Mk.2 Only)) |
62 | 211 |
51 | 212 New in 1.70 Stable: |
213 Stable release | |
52 | 214 WARNING: This update will reset all Custom Functions! |
215 BUGFIX: Gas Changes for Simulator | |
51 | 216 |
45 | 217 New in 1.65 Beta: |
47 | 218 This is the 1.70 Stable release candidate |
45 | 219 BETA Version - Do NOT use for diving! |
220 CHANGE: Restored original Gas Setup | |
221 CHANGE: CF25 (Deco Debug) default to 0 | |
47 | 222 BUGFIX: Velocity warning (CF47) only for ascend |
45 | 223 |
42 | 224 New in 1.63 Beta: |
225 BETA Version - Do NOT use for diving! | |
43 | 226 CHANGE: CF15 defines threshold for CNS display in Surfacemode (OSTC MK.2 only) |
227 NEW: CF48 sets positive clock offset [seconds/24h], added at Midnight | |
44 | 228 BUGFIX: CNS restored after simulation |
42 | 229 |
30 | 230 New in 1.62 Beta: |
231 BETA Version - Do NOT use for diving! | |
232 CHANGE: More space around divemode-menu | |
33 | 233 CHANGE: Disabled "Delete Dive" in logbook |
234 CHANGE: Simulated dives are no longer stored in the logbook | |
235 NEW: Simulator is much faster now | |
34 | 236 NEW: New Simulation results screen |
37 | 237 BUGFIX: CF Warning displayed in Color# Warnings (OSTC Mk.2 only) |
238 NEW: Gas Setup sorts Gaslist | |
239 NEW: Deco Code uses all Gases for forecast | |
30 | 240 |
25 | 241 New in 1.61 Beta: |
242 BETA Version - Do NOT use for diving! | |
243 CHANGE: "Better Gas" now blinks more eye catching | |
244 CHANGE: Battery symbol range changed (OSTC Mk.2 Only) | |
245 NEW: Added CF37: Color# Warnings (OSTC Mk.2 Only) | |
29 | 246 NEW: Color# = 0,4,8,192,196 and 200 (Black or very dim) is ignored (OSTC Mk.2 Only) |
25 | 247 BUGFIX: History not updated in Simulator mode |
26 | 248 BUGFIX: Fixed-Setpoint (minimum) ppO2 limited to physically possible value |
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
249 NEW: Depth, CNS, GF, ppO2 and Velocity are Color-coded (OSTC Mk.2 Only) |
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
250 NEW: CF43: Depth [mbar] for color-code display (OSTC Mk.2 Only) |
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
251 NEW: CF44: CNS [%] for color-code display (OSTC Mk.2 Only) |
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
252 NEW: CF45: GF [%] for color-code display (OSTC Mk.2 Only) |
398
ab962c4b19d6
Fixing issue 50, correct "Bar" to "bar" in texts and comments
heinrichsweikamp
parents:
393
diff
changeset
|
253 NEW: CF46: ppO2 [cbar] for color-code display (OSTC Mk.2 Only) |
28
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
254 NEW: CF47: Velocity [m/min] for color-code display (OSTC Mk.2 Only) |
e01e6428d316
CHANGE: Change of color layout (OSTC Mk.2 Only)
heinrichsweikamp
parents:
27
diff
changeset
|
255 CHANGE: Change of color layout (OSTC Mk.2 Only) |
25 | 256 |
21 | 257 New in 1.60 Stable: |
258 Stable release | |
259 | |
19 | 260 New in 1.56 Beta: |
261 BETA Version - Do NOT use for diving! | |
262 BUGFIX: Inactive Gases in Divemode greyed out (OSTC Mk.2 only) | |
263 NEW: Scale in Tissue Graph (OSTC Mk.2 only) | |
264 NEW: Leading Tissue percent is displayed in Tissue Graph (OSTC Mk.2 only) | |
265 NEW: Diluent is shown in Pre-Dive screen for CC modes | |
266 | |
17 | 267 New in 1.55 Beta: |
268 BETA Version - Do NOT use for diving! | |
269 CHANGE: Greyed out gases more readable | |
270 CHANGE: Removed "Delete All" from Logbook Menu | |
271 NEW: CF42=1: Active Gas will blink if a better gas is available | |
272 CHANGE: Returning from Bailout to CCR mode will not reset diluent gas | |
273 | |
16 | 274 New in 1.54 Beta: |
15 | 275 BETA Version - Do NOT use for diving! |
276 BUGFIX: Freeze at startup | |
277 | |
12 | 278 New in 1.53 Beta: |
279 BETA Version - Do NOT use for diving! | |
280 CHANGE: License moved into Menu | |
281 NEW: Quick power on | |
282 NEW: Not used O2 Sensors are not shown (OSTC1 only) | |
283 NEW: O2 Board is automatically selected when found within the 1st second in divemode (OSTC1 only) | |
13 | 284 NEW: Quick-View of Gaslist (Pre-Dive Check), press ENTER in Surfacemode |
12 | 285 |
4 | 286 New in 1.52 Beta: |
287 BETA Version - Do NOT use for diving! | |
288 NEW: Fixed-Setpoint ppO2 limited to physically possible value | |
7 | 289 BUGFIX: CF32 was displayed wrong on first call |
8 | 290 NEW: Gas change recommendation in divemode ('*' after Gas) |
291 CHANGE: "Const.ppO2 Setup" renamed to "CCR SetPoint Menu" | |
9 | 292 BUGFIX: CF35 now affects all items in surface and divemode |
11 | 293 NEW: CF36 sets Divemode mask color (OSTC Mk.2 only) |
10 | 294 BUGFIX: CF15 removed (OSTC Mk.2 only) |
4 | 295 |
2 | 296 New in 1.51 Beta: |
3 | 297 BETA Version - Do NOT use for diving! |
2 | 298 BUGFIX: PC Simulator mode |
3 | 299 NEW: CF35 sets standard color |
300 BUGFIX: Display startup at very cold ambient temperatures | |
301 BUGFIX: Battery voltage accuracy | |
302 BUGFIX: Temperature accuracy | |
303 BUGFIX: ppO2 is displayed in Bailout mode | |
2 | 304 |
0 | 305 New in 1.50 Stable: |
2 | 306 Initial release for OSTC Mk.2 |