2014-11-10 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
2014-11-06 |
heinrichsweikamp |
cleanup
|
2014-11-06 |
heinrichsweikamp |
suppress ghost readings for long, open cables
|
2014-11-05 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
2014-11-04 |
heinrichsweikamp |
1.62beta start
|
2014-11-03 |
heinrichsweikamp |
reset voting logic on sensor switch
|
2014-11-03 |
heinrichsweikamp |
voting logic for external monitoring
|
2014-10-30 |
heinrichsweikamp |
minor
|
2014-10-29 |
heinrichsweikamp |
limit sensor-read ppO2 to 2.55bar
|
2014-10-29 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
2014-10-27 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
2014-10-25 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
2014-10-22 |
heinrichsweikamp |
minor
|
2014-10-18 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
2014-10-17 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
2014-10-16 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
2014-10-10 |
heinrichsweikamp |
minor cleanup
|
2014-10-09 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
2014-10-08 |
heinrichsweikamp |
1.60 work...
|
2014-10-07 |
heinrichsweikamp |
1.54 beta start
|
2014-10-07 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
2014-10-07 |
heinrichsweikamp |
Merge
|
2014-10-06 |
heinrichsweikamp |
surface pressure copy in simulator
|
2014-10-06 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
2014-10-05 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
2014-10-01 |
heinrichsweikamp |
minor
|
2014-09-30 |
heinrichsweikamp |
BUGFIX: Future TTS in sensor mode
|
2014-09-30 |
heinrichsweikamp |
1.54 beta start
|
2014-09-30 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
2014-09-29 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
2014-09-29 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
2014-09-28 |
heinrichsweikamp |
logbook
|
2014-09-28 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
2014-09-11 |
heinrichsweikamp |
testing consumption
|
2014-09-10 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
2014-09-10 |
heinrichsweikamp |
clarify diluent change in the documentation
|
2014-09-09 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
2014-09-09 |
heinrichsweikamp |
skip fallback warning in OC modes
|
2014-09-08 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
2014-09-08 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
2014-09-04 |
heinrichsweikamp |
nicer boot into surfacemode
|
2014-08-29 |
heinrichsweikamp |
make new parameters configurable through pc
|
2014-08-28 |
heinrichsweikamp |
minor
|
2014-08-28 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
2014-08-27 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
2014-08-21 |
heinrichsweikamp |
minor
|
2014-08-21 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
2014-08-18 |
heinrichsweikamp |
work on flip screen...
|
2014-08-13 |
heinrichsweikamp |
1.51beta start
|
2014-08-11 |
heinrichsweikamp |
1.50 stable release
|
2014-08-06 |
heinrichsweikamp |
some cleanup
|
2014-08-06 |
heinrichsweikamp |
some cleanup
|
2014-08-05 |
heinrichsweikamp |
fallback default = 1
|
2014-08-05 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
2014-08-04 |
heinrichsweikamp |
1.45 beta release
|
2014-08-03 |
heinrichsweikamp |
seperate option table, place in address <0x10000
|
2014-07-31 |
mh |
option_read and option_write eeprom banking
|
2014-07-31 |
heinrichsweikamp |
New changelog.txt format
|
2014-07-18 |
heinrichsweikamp |
1.44 beta release
|
2014-07-17 |
heinrichsweikamp |
some cleanup
|