Wed, 07 Oct 2015 13:14:09 +0200 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
Tue, 06 Oct 2015 12:55:01 +0200 |
heinrichsweikamp |
minor language update (german)
|
Wed, 30 Sep 2015 15:38:28 +0200 |
heinrichsweikamp |
language updates
|
Wed, 23 Sep 2015 17:35:19 +0200 |
heinrichsweikamp |
allow compass bearing on surface
|
Sat, 19 Sep 2015 13:41:40 +0200 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
Tue, 15 Sep 2015 18:11:35 +0200 |
heinrichsweikamp |
Merge
|
Fri, 11 Sep 2015 19:37:28 +0200 |
heinrichsweikamp |
minor
|
Tue, 15 Sep 2015 18:11:08 +0200 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
Thu, 10 Sep 2015 13:05:26 +0200 |
heinrichsweikamp |
set char_I_current_gas for gas6 use
|
Mon, 07 Sep 2015 13:58:23 +0200 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
Thu, 27 Aug 2015 17:05:13 +0200 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
Tue, 25 Aug 2015 14:22:55 +0200 |
heinrichsweikamp |
docu update
|
Fri, 21 Aug 2015 18:37:52 +0200 |
heinrichsweikamp |
1.87 release
|
Wed, 19 Aug 2015 18:40:01 +0200 |
heinrichsweikamp |
logbook work
|
Wed, 19 Aug 2015 16:27:00 +0200 |
heinrichsweikamp |
fix some display issues with display1
|
Tue, 18 Aug 2015 22:02:55 +0200 |
heinrichsweikamp |
debugging the compass screen
|
Tue, 18 Aug 2015 17:39:07 +0200 |
heinrichsweikamp |
fixing some layout issues
|
Sun, 16 Aug 2015 15:16:23 +0200 |
heinrichsweikamp |
Additional temperature calibration via PC interface
|
Sat, 15 Aug 2015 12:08:51 +0200 |
heinrichsweikamp |
jump to 1.87
|
Sat, 15 Aug 2015 09:25:17 +0200 |
heinrichsweikamp |
tft timings
|
Wed, 12 Aug 2015 17:41:06 +0200 |
heinrichsweikamp |
minor
|
Wed, 05 Aug 2015 12:28:13 +0200 |
heinrichsweikamp |
french update
|
Tue, 04 Aug 2015 16:37:19 +0200 |
heinrichsweikamp |
cleanup
|
Tue, 04 Aug 2015 11:20:34 +0200 |
heinrichsweikamp |
changelog
|
Tue, 04 Aug 2015 11:09:35 +0200 |
heinrichsweikamp |
1.85beta release
|
Mon, 03 Aug 2015 22:47:39 +0200 |
heinrichsweikamp |
hardware support
|
Mon, 03 Aug 2015 17:27:05 +0200 |
heinrichsweikamp |
make AUTO SP available on OSTC2 hardware
|
Mon, 03 Aug 2015 12:18:18 +0200 |
heinrichsweikamp |
french update
|
Sun, 02 Aug 2015 16:52:31 +0200 |
heinrichsweikamp |
BUGFIX: Auto-Brightness clipped to lowest settings in bright sunlight on some devices
|
Sun, 02 Aug 2015 09:52:28 +0200 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
Fri, 31 Jul 2015 17:44:03 +0200 |
heinrichsweikamp |
hud v3 support
|
Wed, 29 Jul 2015 20:39:35 +0200 |
heinrichsweikamp |
some cleanups
|
Tue, 28 Jul 2015 16:32:55 +0200 |
heinrichsweikamp |
NEW: Quit Simulator automatically when starting a real dive
|
Tue, 28 Jul 2015 13:23:09 +0200 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
Fri, 24 Jul 2015 14:52:39 +0200 |
jdg |
BUGFIX gas volume: do not forget deco gas with switch >= dive's bottom depth.
|
Thu, 23 Jul 2015 12:53:35 +0200 |
heinrichsweikamp |
some cleanups
|
Thu, 23 Jul 2015 10:09:21 +0200 |
heinrichsweikamp |
docu update
|
Wed, 15 Jul 2015 17:57:37 +0200 |
jDG |
[FIX] GasVolume: missing gas changes w/o stops.
|
Wed, 22 Jul 2015 10:42:15 +0200 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
Tue, 21 Jul 2015 12:08:01 +0200 |
heinrichsweikamp |
New option to download "Compact Headers". Improved BLE support (OSTC 2 and OSTC 3+), updated OSTC interface documentation
|
Mon, 20 Jul 2015 19:07:28 +0200 |
heinrichsweikamp |
re-arrange settings menu
|
Mon, 20 Jul 2015 15:04:13 +0200 |
heinrichsweikamp |
CHANGE: GF and aGF high range increased to 45-110%
|
Mon, 20 Jul 2015 12:43:42 +0200 |
heinrichsweikamp |
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
|
Wed, 15 Jul 2015 15:39:35 +0200 |
jDG |
Fix low_depth shall be stored as a float (no rounding).
|
Mon, 06 Jul 2015 12:50:49 +0200 |
heinrichsweikamp |
Show ppo2 <1bar with leading zero
|
Fri, 03 Jul 2015 15:46:56 +0200 |
heinrichsweikamp |
changelog
|
Fri, 03 Jul 2015 15:08:15 +0200 |
heinrichsweikamp |
minor: fix calc_deko_divemode_sensor
|
Fri, 03 Jul 2015 14:47:04 +0200 |
heinrichsweikamp |
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
|
Sun, 28 Jun 2015 13:58:00 +0200 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
Sun, 28 Jun 2015 05:05:46 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Sun, 28 Jun 2015 05:02:45 +0200 |
janos_kovacs |
Always show ppO2 (warning position, standard color) option
new_screen_layout
|
Sun, 28 Jun 2015 03:55:08 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Fix positions if no VSI Bar displayed
new_screen_layout
|
Fri, 26 Jun 2015 15:03:47 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Wed, 24 Jun 2015 22:19:32 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sun, 21 Jun 2015 12:12:12 +0200 |
heinrichsweikamp |
change button sensitivity range and default
|
Sun, 14 Jun 2015 11:06:20 +0200 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
Sun, 14 Jun 2015 00:16:00 +0200 |
janos_kovacs |
Small fix for the custom grid layout
new_screen_layout
|
Sat, 13 Jun 2015 22:53:05 +0200 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
Sat, 13 Jun 2015 22:54:37 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sat, 13 Jun 2015 02:28:37 +0200 |
jdg |
FIX NDL prediction error with Buhlmann model: might be desaturating too fast.
|
Fri, 12 Jun 2015 22:18:21 +0200 |
jDG |
FIX minor assert: separate diluant list means current gas can go up to 10.
|
Fri, 12 Jun 2015 22:15:57 +0200 |
jDG |
FIX 16bits CNS feedback: assert CNS up to 999%
|
Thu, 11 Jun 2015 17:02:09 +0100 |
janos_kovacs |
VSIbar #3f: roll back debug color
new_screen_layout
|
Thu, 11 Jun 2015 16:07:29 +0100 |
janos_kovacs |
VSIbar #3e: additional filter on zero ascend rate
new_screen_layout
|
Thu, 11 Jun 2015 16:44:32 +0200 |
heinrichsweikamp |
move flag13 into bank common
new_screen_layout
|
Thu, 11 Jun 2015 15:16:42 +0100 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
Thu, 11 Jun 2015 13:40:14 +0100 |
janos_kovacs |
VSIbar #3c: extra steps to keep calculation clear
new_screen_layout
|
Wed, 10 Jun 2015 22:47:38 +0100 |
janos_kovacs |
VSIbar #3b: small fix on the bar's width
new_screen_layout
|
Wed, 10 Jun 2015 22:32:38 +0100 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
Wed, 10 Jun 2015 22:24:27 +0100 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Wed, 10 Jun 2015 16:03:21 +0200 |
jDG |
FIX minor comment about deco offset unit...
|
Tue, 09 Jun 2015 10:47:12 +0200 |
heinrichsweikamp |
Config table for alternative display
|
Tue, 09 Jun 2015 02:15:01 +0200 |
jdg |
FIX missing extern .C definition.
|
Mon, 08 Jun 2015 01:36:05 +0200 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
Sun, 07 Jun 2015 22:07:55 +0200 |
janos_kovacs |
VSIbar #1: layout position changes
new_screen_layout
|
Fri, 05 Jun 2015 13:37:13 +0200 |
Janos Kovacs |
VSI text v2 merged from new_screen_layout into default
|
Tue, 02 Jun 2015 23:38:21 +0100 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
Tue, 02 Jun 2015 17:34:19 +0100 |
Janos Kovacs |
Merge default back to the new_screen_layout development branch
new_screen_layout
|
Tue, 02 Jun 2015 16:34:02 +0200 |
heinrichsweikamp |
rename tMODwarning
|
Mon, 01 Jun 2015 17:19:37 +0200 |
heinrichsweikamp |
Merge with new_screen_layout
|
Mon, 01 Jun 2015 15:21:25 +0200 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
Mon, 01 Jun 2015 11:50:34 +0200 |
heinrichsweikamp |
default branch
|
Mon, 01 Jun 2015 11:48:05 +0200 |
heinrichsweikamp |
New screen layout test
new_screen_layout
|
Sun, 31 May 2015 21:24:16 +0200 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
Sun, 31 May 2015 20:25:12 +0200 |
heinrichsweikamp |
Make char_I_bottom_usage and char_I_deco_usage configurable from PC
|
Sun, 31 May 2015 16:19:56 +0200 |
heinrichsweikamp |
new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
|
Sun, 31 May 2015 10:42:47 +0200 |
heinrichsweikamp |
German tGasUsage
|
Sun, 31 May 2015 02:47:50 +0200 |
jDG |
Slight more efficient bail deco, Test with 2 bail tanks.
|
Sun, 31 May 2015 02:14:09 +0200 |
jDG |
NEW CCR decoplan: 2nd pass to display bailout stops and gas volumes
|
Sat, 30 May 2015 22:58:00 +0200 |
jDG |
FIX clear before displaying gas volumes.
|
Sat, 30 May 2015 22:43:53 +0200 |
jDG |
FIX tests to use plans copyed from actual OSTC3 1.82 computer.
|
Sat, 30 May 2015 21:34:01 +0200 |
jDG |
ADD (back) Gas Volumes display after decoplanning.
|
Sat, 30 May 2015 21:33:04 +0200 |
jDG |
ADD tGasUsage, with FR translation (and DE,IT defaults)
|
Fri, 29 May 2015 02:50:12 +0200 |
jdg |
NEW gas_volume unit test in CCR mode. Works too.
|
Fri, 29 May 2015 02:46:44 +0200 |
jdg |
[mq]: 2015-05-29_02-40-44_r288+.diff
|
Fri, 29 May 2015 02:40:43 +0200 |
jdg |
FIX gas_volume shall read gas switches from char_O_deco_gas
|
Fri, 29 May 2015 02:24:03 +0200 |
jdg |
FIX gas_volumes: shall take stops in forward order.
|
Fri, 29 May 2015 02:07:28 +0200 |
jdg |
NEW test w/o stops and with stops
|
Fri, 29 May 2015 01:25:45 +0200 |
jdg |
NEW unit tests for gas volumes...
|
Thu, 28 May 2015 09:56:15 +0200 |
heinrichsweikamp |
preperations to compute gas consumtion in simulator
|
Wed, 27 May 2015 10:57:29 +0200 |
heinrichsweikamp |
1.82beta with new compass calib code
|
Fri, 22 May 2015 14:50:40 +0200 |
jDG |
Make a more compact COMPASS calibration code (<7KB), and add more tests.
|
Tue, 26 May 2015 17:40:13 +0200 |
heinrichsweikamp |
BUGFIX: Fix download issue for dives made with 1.80 firmware
|
Tue, 26 May 2015 13:24:26 +0200 |
heinrichsweikamp |
doku update
|
Tue, 26 May 2015 12:38:17 +0200 |
heinrichsweikamp |
bugfix wrong profile length in header
|
Mon, 18 May 2015 21:25:56 +0200 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
Mon, 18 May 2015 14:24:50 +0200 |
heinrichsweikamp |
1.79beta - update internal sensor registers during boot
|
Tue, 12 May 2015 14:24:46 +0200 |
heinrichsweikamp |
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
|
Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
Tue, 05 May 2015 14:58:16 +0200 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
Mon, 04 May 2015 12:56:07 +0200 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
Wed, 29 Apr 2015 16:54:58 +0200 |
heinrichsweikamp |
1.78 release
|
Tue, 28 Apr 2015 16:39:28 +0200 |
heinrichsweikamp |
Update digital ppO2 data automatically
|
Wed, 22 Apr 2015 16:03:31 +0200 |
heinrichsweikamp |
increase min input voltage from 1,2mV to 1,9mV (cR only)
|
Mon, 20 Apr 2015 11:18:30 +0200 |
heinrichsweikamp |
adjust menu for different hardware versions
|
Sun, 19 Apr 2015 20:41:48 +0200 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
Thu, 16 Apr 2015 11:30:00 +0200 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
Tue, 14 Apr 2015 16:16:14 +0200 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|