Mon, 28 Aug 2017 17:51:14 +0200 |
heinrichsweikamp |
2.23 start
|
Fri, 25 Aug 2017 11:07:52 +0200 |
heinrichsweikamp |
2.22 internal release
|
Wed, 23 Aug 2017 14:43:57 +0200 |
heinrichsweikamp |
minor
|
Tue, 22 Aug 2017 15:14:06 +0200 |
heinrichsweikamp |
update customview mask to (eventually) rewrite ppO2(Dil): to ppO2:
|
Tue, 22 Aug 2017 13:23:52 +0200 |
heinrichsweikamp |
NEW: Show a warning for each sensor if the sensor is end-of-life after calibration (Less then 8mV in Air at sea level)
|
Mon, 21 Aug 2017 15:11:06 +0200 |
heinrichsweikamp |
Setpoint Change Depth Fix
|
Mon, 21 Aug 2017 14:55:36 +0200 |
heinrichsweikamp |
CHANGE: CCR Calibration gas range limited to O2% 21-25 and 95-100 to save button presses
|
Mon, 21 Aug 2017 14:25:02 +0200 |
heinrichsweikamp |
Minor French text update, roll-back gaslist.asm changes
|
Fri, 18 Aug 2017 15:19:35 +0200 |
heinrichsweikamp |
2.21 start
|
Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
Mon, 07 Aug 2017 15:18:32 +0200 |
heinrichsweikamp |
minor
|
Sun, 06 Aug 2017 20:12:49 +0200 |
heinrichsweikamp |
BUGFIX: Ignore "Toggle GF" Menu entry (in divemode) when using the non-GF deco mode
|
Sat, 05 Aug 2017 17:36:58 +0200 |
heinrichsweikamp |
BUGFIX: O2 as diluent in CCR caused wrong calculations (Deco, EAD, END) in less then 6m depth
|
Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
Sat, 05 Aug 2017 15:04:08 +0200 |
heinrichsweikamp |
BUGFIX: Do not show GF in divemode for non-GF deco mode
|
Sat, 05 Aug 2017 10:58:40 +0200 |
heinrichsweikamp |
menu work
|
Fri, 04 Aug 2017 19:20:58 +0200 |
heinrichsweikamp |
BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
|
Fri, 04 Aug 2017 16:19:50 +0200 |
heinrichsweikamp |
BUGFIX: Impossible fixed-ppO2 (e.g. 1,6bar in 3m) used for tissue calculations
|
Fri, 04 Aug 2017 16:01:28 +0200 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
Fri, 04 Aug 2017 13:41:29 +0200 |
heinrichsweikamp |
Excel sheets for debugging nofly time from Ralph Lembcke
|
Thu, 03 Aug 2017 17:22:16 +0200 |
heinrichsweikamp |
minor
|
Thu, 03 Aug 2017 17:17:25 +0200 |
heinrichsweikamp |
BUGFIX: Do not check ppO2 for disabled gases
|
Thu, 03 Aug 2017 17:03:05 +0200 |
heinrichsweikamp |
CHANGE: Show actual GF (Not relative) in custom views in dive mode
|
Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
Thu, 03 Aug 2017 16:31:16 +0200 |
heinrichsweikamp |
docu update
|
Sat, 15 Jul 2017 10:38:35 +0200 |
heinrichsweikamp |
hex build
|
Tue, 11 Jul 2017 14:34:56 +0200 |
heinrichsweikamp |
minor
|
Tue, 04 Jul 2017 19:01:32 +0200 |
heinrichsweikamp |
minor
|
Tue, 04 Jul 2017 16:12:53 +0200 |
heinrichsweikamp |
BUGFIX: Lost Diluent now possible in CCR and PSCR mode
|
Fri, 30 Jun 2017 15:12:56 +0200 |
heinrichsweikamp |
BUGFIX: Planner in CCR mode used OC gases for volume calculations in some cases
|
Thu, 29 Jun 2017 11:48:13 +0200 |
heinrichsweikamp |
2.20 RC1
|
Thu, 29 Jun 2017 11:47:08 +0200 |
heinrichsweikamp |
2.18 beta release
|
Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
Mon, 26 Jun 2017 13:02:04 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
Mon, 26 Jun 2017 12:30:54 +0200 |
heinrichsweikamp |
BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
|
Sat, 24 Jun 2017 19:26:06 +0200 |
heinrichsweikamp |
minor
|
Sun, 11 Jun 2017 17:11:40 +0200 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
Fri, 09 Jun 2017 14:47:02 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
|
Mon, 22 May 2017 23:03:21 +0200 |
heinrichsweikamp |
minor
|
Thu, 11 May 2017 15:39:40 +0200 |
heinrichsweikamp |
Battery % in logbook when updated from Sport to Tech
|
Mon, 08 May 2017 12:52:49 +0200 |
heinrichsweikamp |
minor
|
Wed, 19 Apr 2017 12:54:00 +0200 |
heinrichsweikamp |
compass1 full scale gain test
|
Mon, 03 Apr 2017 12:21:03 +0200 |
heinrichsweikamp |
2.15 release
|
Sun, 02 Apr 2017 21:14:01 +0200 |
heinrichsweikamp |
show battery % in logbook (For dives made with 2.15 or newer)
|
Sun, 02 Apr 2017 20:21:10 +0200 |
heinrichsweikamp |
Bugfix: More then one marker shown deleted profile
|
Thu, 30 Mar 2017 15:08:00 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 11:57:54 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 11:28:40 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 10:41:43 +0200 |
heinrichsweikamp |
minor new sleepmode fix
|
Wed, 29 Mar 2017 21:35:12 +0200 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
Mon, 27 Mar 2017 16:06:09 +0200 |
heinrichsweikamp |
docu (battery info byte)
|
Mon, 27 Mar 2017 15:49:00 +0200 |
heinrichsweikamp |
docu update
|
Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
Mon, 20 Feb 2017 15:51:51 +0100 |
heinrichsweikamp |
2.15 start...
|
Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
Mon, 20 Feb 2017 12:00:58 +0100 |
heinrichsweikamp |
minor
|
Mon, 20 Feb 2017 11:56:10 +0100 |
heinrichsweikamp |
Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
|
Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
Mon, 06 Feb 2017 17:24:05 +0100 |
heinrichsweikamp |
cleanup pscr menu
|
Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
Wed, 01 Feb 2017 13:51:59 +0100 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
Tue, 17 Jan 2017 11:57:52 +0100 |
heinrichsweikamp |
2.12 release
|
Mon, 16 Jan 2017 11:59:55 +0100 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
Mon, 16 Jan 2017 11:05:02 +0100 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|