Sun, 28 Jun 2015 03:55:08 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Fix positions if no VSI Bar displayed
new_screen_layout
|
Fri, 26 Jun 2015 15:03:47 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Wed, 24 Jun 2015 22:19:32 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sun, 21 Jun 2015 12:12:12 +0200 |
heinrichsweikamp |
change button sensitivity range and default
|
Sun, 14 Jun 2015 11:06:20 +0200 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
Sun, 14 Jun 2015 00:16:00 +0200 |
janos_kovacs |
Small fix for the custom grid layout
new_screen_layout
|
Sat, 13 Jun 2015 22:53:05 +0200 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
Sat, 13 Jun 2015 22:54:37 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sat, 13 Jun 2015 02:28:37 +0200 |
jdg |
FIX NDL prediction error with Buhlmann model: might be desaturating too fast.
|
Fri, 12 Jun 2015 22:18:21 +0200 |
jDG |
FIX minor assert: separate diluant list means current gas can go up to 10.
|
Fri, 12 Jun 2015 22:15:57 +0200 |
jDG |
FIX 16bits CNS feedback: assert CNS up to 999%
|
Thu, 11 Jun 2015 17:02:09 +0100 |
janos_kovacs |
VSIbar #3f: roll back debug color
new_screen_layout
|
Thu, 11 Jun 2015 16:07:29 +0100 |
janos_kovacs |
VSIbar #3e: additional filter on zero ascend rate
new_screen_layout
|
Thu, 11 Jun 2015 16:44:32 +0200 |
heinrichsweikamp |
move flag13 into bank common
new_screen_layout
|
Thu, 11 Jun 2015 15:16:42 +0100 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
Thu, 11 Jun 2015 13:40:14 +0100 |
janos_kovacs |
VSIbar #3c: extra steps to keep calculation clear
new_screen_layout
|
Wed, 10 Jun 2015 22:47:38 +0100 |
janos_kovacs |
VSIbar #3b: small fix on the bar's width
new_screen_layout
|
Wed, 10 Jun 2015 22:32:38 +0100 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
Wed, 10 Jun 2015 22:24:27 +0100 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Wed, 10 Jun 2015 16:03:21 +0200 |
jDG |
FIX minor comment about deco offset unit...
|
Tue, 09 Jun 2015 10:47:12 +0200 |
heinrichsweikamp |
Config table for alternative display
|
Tue, 09 Jun 2015 02:15:01 +0200 |
jdg |
FIX missing extern .C definition.
|
Mon, 08 Jun 2015 01:36:05 +0200 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
Sun, 07 Jun 2015 22:07:55 +0200 |
janos_kovacs |
VSIbar #1: layout position changes
new_screen_layout
|
Fri, 05 Jun 2015 13:37:13 +0200 |
Janos Kovacs |
VSI text v2 merged from new_screen_layout into default
|
Tue, 02 Jun 2015 23:38:21 +0100 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
Tue, 02 Jun 2015 17:34:19 +0100 |
Janos Kovacs |
Merge default back to the new_screen_layout development branch
new_screen_layout
|
Tue, 02 Jun 2015 16:34:02 +0200 |
heinrichsweikamp |
rename tMODwarning
|
Mon, 01 Jun 2015 17:19:37 +0200 |
heinrichsweikamp |
Merge with new_screen_layout
|
Mon, 01 Jun 2015 15:21:25 +0200 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
Mon, 01 Jun 2015 11:50:34 +0200 |
heinrichsweikamp |
default branch
|
Mon, 01 Jun 2015 11:48:05 +0200 |
heinrichsweikamp |
New screen layout test
new_screen_layout
|
Sun, 31 May 2015 21:24:16 +0200 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
Sun, 31 May 2015 20:25:12 +0200 |
heinrichsweikamp |
Make char_I_bottom_usage and char_I_deco_usage configurable from PC
|
Sun, 31 May 2015 16:19:56 +0200 |
heinrichsweikamp |
new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
|
Sun, 31 May 2015 10:42:47 +0200 |
heinrichsweikamp |
German tGasUsage
|
Sun, 31 May 2015 02:47:50 +0200 |
jDG |
Slight more efficient bail deco, Test with 2 bail tanks.
|
Sun, 31 May 2015 02:14:09 +0200 |
jDG |
NEW CCR decoplan: 2nd pass to display bailout stops and gas volumes
|
Sat, 30 May 2015 22:58:00 +0200 |
jDG |
FIX clear before displaying gas volumes.
|
Sat, 30 May 2015 22:43:53 +0200 |
jDG |
FIX tests to use plans copyed from actual OSTC3 1.82 computer.
|
Sat, 30 May 2015 21:34:01 +0200 |
jDG |
ADD (back) Gas Volumes display after decoplanning.
|
Sat, 30 May 2015 21:33:04 +0200 |
jDG |
ADD tGasUsage, with FR translation (and DE,IT defaults)
|
Fri, 29 May 2015 02:50:12 +0200 |
jdg |
NEW gas_volume unit test in CCR mode. Works too.
|
Fri, 29 May 2015 02:46:44 +0200 |
jdg |
[mq]: 2015-05-29_02-40-44_r288+.diff
|
Fri, 29 May 2015 02:40:43 +0200 |
jdg |
FIX gas_volume shall read gas switches from char_O_deco_gas
|
Fri, 29 May 2015 02:24:03 +0200 |
jdg |
FIX gas_volumes: shall take stops in forward order.
|
Fri, 29 May 2015 02:07:28 +0200 |
jdg |
NEW test w/o stops and with stops
|
Fri, 29 May 2015 01:25:45 +0200 |
jdg |
NEW unit tests for gas volumes...
|
Thu, 28 May 2015 09:56:15 +0200 |
heinrichsweikamp |
preperations to compute gas consumtion in simulator
|
Wed, 27 May 2015 10:57:29 +0200 |
heinrichsweikamp |
1.82beta with new compass calib code
|
Fri, 22 May 2015 14:50:40 +0200 |
jDG |
Make a more compact COMPASS calibration code (<7KB), and add more tests.
|
Tue, 26 May 2015 17:40:13 +0200 |
heinrichsweikamp |
BUGFIX: Fix download issue for dives made with 1.80 firmware
|
Tue, 26 May 2015 13:24:26 +0200 |
heinrichsweikamp |
doku update
|
Tue, 26 May 2015 12:38:17 +0200 |
heinrichsweikamp |
bugfix wrong profile length in header
|
Mon, 18 May 2015 21:25:56 +0200 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
Mon, 18 May 2015 14:24:50 +0200 |
heinrichsweikamp |
1.79beta - update internal sensor registers during boot
|
Tue, 12 May 2015 14:24:46 +0200 |
heinrichsweikamp |
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
|
Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
Tue, 05 May 2015 14:58:16 +0200 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
Mon, 04 May 2015 12:56:07 +0200 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
Wed, 29 Apr 2015 16:54:58 +0200 |
heinrichsweikamp |
1.78 release
|
Tue, 28 Apr 2015 16:39:28 +0200 |
heinrichsweikamp |
Update digital ppO2 data automatically
|
Wed, 22 Apr 2015 16:03:31 +0200 |
heinrichsweikamp |
increase min input voltage from 1,2mV to 1,9mV (cR only)
|
Mon, 20 Apr 2015 11:18:30 +0200 |
heinrichsweikamp |
adjust menu for different hardware versions
|
Sun, 19 Apr 2015 20:41:48 +0200 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
Thu, 16 Apr 2015 11:30:00 +0200 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
Tue, 14 Apr 2015 16:16:14 +0200 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|
Mon, 30 Mar 2015 14:59:07 +0200 |
heinrichsweikamp |
1.76 release
|
Thu, 26 Mar 2015 14:21:42 +0100 |
janos_kovacs |
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.
|
Thu, 26 Mar 2015 13:50:02 +0100 |
heinrichsweikamp |
show unit8 options in menu left-aligned
|
Thu, 26 Mar 2015 11:37:37 +0100 |
heinrichsweikamp |
bugfix dynamic gas list
|
Wed, 25 Mar 2015 18:07:46 +0100 |
heinrichsweikamp |
language update
|
Tue, 24 Mar 2015 19:48:17 +0100 |
heinrichsweikamp |
increase immunity against false Qi data
|
Mon, 23 Mar 2015 19:58:19 +0100 |
heinrichsweikamp |
minor cleanup
|
Mon, 23 Mar 2015 19:41:27 +0100 |
heinrichsweikamp |
patch for bearing issue
|
Mon, 23 Mar 2015 18:40:58 +0100 |
heinrichsweikamp |
minor speed and size improvements for the compass routine
|
Mon, 23 Mar 2015 18:02:40 +0100 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
Mon, 23 Mar 2015 17:07:57 +0100 |
heinrichsweikamp |
add bearing option to compass
|
Fri, 20 Mar 2015 10:16:49 +0100 |
heinrichsweikamp |
preparations to set a course for the compass display
|
Thu, 19 Mar 2015 13:50:06 +0100 |
heinrichsweikamp |
another icon update
|
Thu, 19 Mar 2015 12:28:23 +0100 |
heinrichsweikamp |
change warning sign
|
Wed, 18 Mar 2015 17:39:27 +0100 |
heinrichsweikamp |
some cleanup, temporaly disable dive_warning.inc
|
Wed, 18 Mar 2015 16:42:49 +0100 |
heinrichsweikamp |
Graphical compass from kovacs
|
Tue, 17 Mar 2015 12:16:15 +0100 |
heinrichsweikamp |
ignore sensor for non-sensor hardware
|
Mon, 16 Mar 2015 15:58:51 +0100 |
heinrichsweikamp |
support hardware_flag for all possible hardware combinations
|
Fri, 13 Mar 2015 10:49:43 +0100 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
Thu, 05 Mar 2015 10:36:56 +0100 |
heinrichsweikamp |
minor docu update
|
Wed, 04 Mar 2015 19:01:57 +0100 |
heinrichsweikamp |
use single-byte hardware flag (again)
|
Wed, 04 Mar 2015 16:26:48 +0100 |
heinrichsweikamp |
minor docu update (removed typo)
|
Wed, 04 Mar 2015 16:25:44 +0100 |
heinrichsweikamp |
auto-select correct settings menu
|
Tue, 03 Mar 2015 12:09:24 +0100 |
heinrichsweikamp |
expand hardware_flag to 4 bytes
|
Mon, 02 Mar 2015 17:05:09 +0100 |
heinrichsweikamp |
docu update
|
Mon, 02 Mar 2015 10:54:00 +0100 |
heinrichsweikamp |
auto-select correct ccr menu
|
Sun, 01 Mar 2015 21:10:14 +0100 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
Sun, 01 Mar 2015 13:06:17 +0100 |
heinrichsweikamp |
cleanup
|
Thu, 26 Feb 2015 13:13:23 +0100 |
heinrichsweikamp |
1.75 release
|
Wed, 25 Feb 2015 22:19:30 +0100 |
heinrichsweikamp |
configure hardware_flag byte
|
Wed, 25 Feb 2015 16:49:59 +0100 |
heinrichsweikamp |
under construction: new hardware_flag to configure different hardware versions
|
Wed, 25 Feb 2015 13:57:30 +0100 |
heinrichsweikamp |
Show OSTC2-like active gas boxes in surface mode
|
Wed, 25 Feb 2015 11:51:50 +0100 |
heinrichsweikamp |
show start gas in normal font
|
Sun, 22 Feb 2015 12:14:03 -0400 |
mh |
show start gas in OC mode permanently
|
Sat, 21 Feb 2015 20:05:57 +0100 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
Fri, 20 Feb 2015 00:15:22 +0100 |
mh |
Bugfix: Check for divemode before checking for menu
|
Wed, 18 Feb 2015 23:07:04 +0100 |
mh |
minor cleanup
|
Thu, 05 Feb 2015 14:51:24 +0100 |
heinrichsweikamp |
1.74 release
|
Mon, 02 Feb 2015 17:39:38 +0100 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
Mon, 02 Feb 2015 17:04:43 +0100 |
heinrichsweikamp |
button config (cR)
|
Sun, 01 Feb 2015 18:49:24 +0100 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
Thu, 29 Jan 2015 18:18:15 +0100 |
heinrichsweikamp |
temporally disable "Copy disable flags from digital input" routine
|
Wed, 14 Jan 2015 11:37:19 +0100 |
heinrichsweikamp |
PC config, 1.72 release
|
Tue, 06 Jan 2015 19:24:58 +0100 |
heinrichsweikamp |
check opt_max correctly
|
Mon, 05 Jan 2015 16:13:15 +0100 |
heinrichsweikamp |
minor: configure buttons during splash screen
|
Mon, 05 Jan 2015 14:41:23 +0100 |
heinrichsweikamp |
make button sensitivity configurable (cR hardware)
|
Sun, 04 Jan 2015 21:24:01 +0100 |
heinrichsweikamp |
init new 4kB Page in logbook memory when pointer is not valid.
|
Fri, 19 Dec 2014 17:56:40 +0100 |
heinrichsweikamp |
1.71beta start
|
Wed, 17 Dec 2014 14:46:45 +0100 |
heinrichsweikamp |
1.7 release
|
Mon, 15 Dec 2014 19:50:51 +0100 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
Mon, 15 Dec 2014 12:50:23 +0100 |
heinrichsweikamp |
ignore battery menu for cr
|
Sun, 14 Dec 2014 13:56:05 +0100 |
heinrichsweikamp |
compass changes
|
Sat, 13 Dec 2014 11:18:56 +0100 |
heinrichsweikamp |
layout changes
|
Wed, 10 Dec 2014 09:13:49 +0100 |
heinrichsweikamp |
Merge
|
Wed, 10 Dec 2014 09:13:36 +0100 |
heinrichsweikamp |
minor
|
Sun, 07 Dec 2014 23:04:16 +0100 |
heinrichsweikamp |
do not clear char_O_deco_gas in copy_deco_table
|
Sun, 07 Dec 2014 18:03:05 +0100 |
heinrichsweikamp |
cleanup
|
Sun, 07 Dec 2014 12:47:19 +0100 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
Sat, 06 Dec 2014 21:04:27 +0100 |
heinrichsweikamp |
charge indicator on surface screen
|
Mon, 01 Dec 2014 17:06:53 +0100 |
heinrichsweikamp |
always reboot display in divemode
|
Wed, 26 Nov 2014 14:30:25 +0100 |
heinrichsweikamp |
Preparations for 1.7
|
Sun, 23 Nov 2014 22:33:41 +0100 |
heinrichsweikamp |
minor
|
Fri, 21 Nov 2014 11:51:53 +0100 |
heinrichsweikamp |
1.64 (Fix ambient light for cR)
|
Fri, 21 Nov 2014 11:10:07 +0100 |
heinrichsweikamp |
1.63beta release
|
Thu, 20 Nov 2014 20:32:36 +0100 |
heinrichsweikamp |
lower minimum backlight in eco mode
|
Wed, 12 Nov 2014 19:33:15 +0100 |
heinrichsweikamp |
cleanup
|
Tue, 11 Nov 2014 16:55:39 +0100 |
heinrichsweikamp |
minor
|
Mon, 10 Nov 2014 13:54:20 +0100 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
Thu, 06 Nov 2014 15:28:59 +0100 |
heinrichsweikamp |
cleanup
|
Thu, 06 Nov 2014 12:00:44 +0100 |
heinrichsweikamp |
suppress ghost readings for long, open cables
|
Wed, 05 Nov 2014 14:43:13 +0100 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
Tue, 04 Nov 2014 15:21:32 +0100 |
heinrichsweikamp |
1.62beta start
|
Mon, 03 Nov 2014 17:31:03 +0100 |
heinrichsweikamp |
reset voting logic on sensor switch
|
Mon, 03 Nov 2014 17:25:19 +0100 |
heinrichsweikamp |
voting logic for external monitoring
|
Thu, 30 Oct 2014 17:45:50 +0100 |
heinrichsweikamp |
minor
|
Wed, 29 Oct 2014 15:33:36 +0100 |
heinrichsweikamp |
limit sensor-read ppO2 to 2.55bar
|
Wed, 29 Oct 2014 12:53:01 +0100 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
Mon, 27 Oct 2014 11:28:48 +0100 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
Sat, 25 Oct 2014 15:28:18 +0200 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
Wed, 22 Oct 2014 18:09:01 +0200 |
heinrichsweikamp |
minor
|
Sat, 18 Oct 2014 10:03:28 +0200 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
Fri, 17 Oct 2014 13:31:14 +0200 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
Thu, 16 Oct 2014 13:11:18 +0200 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
Fri, 10 Oct 2014 11:13:54 +0200 |
heinrichsweikamp |
minor cleanup
|
Thu, 09 Oct 2014 11:18:56 +0200 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
Wed, 08 Oct 2014 17:57:37 +0200 |
heinrichsweikamp |
1.60 work...
|
Tue, 07 Oct 2014 14:21:46 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 07 Oct 2014 13:45:21 +0200 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
Tue, 07 Oct 2014 08:42:38 +0200 |
heinrichsweikamp |
Merge
|
Mon, 06 Oct 2014 23:47:08 +0200 |
heinrichsweikamp |
surface pressure copy in simulator
|
Mon, 06 Oct 2014 11:48:23 +0200 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
Sun, 05 Oct 2014 15:36:17 +0200 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
Wed, 01 Oct 2014 10:31:53 +0200 |
heinrichsweikamp |
minor
|
Tue, 30 Sep 2014 19:19:53 +0200 |
heinrichsweikamp |
BUGFIX: Future TTS in sensor mode
|
Tue, 30 Sep 2014 10:43:57 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 30 Sep 2014 10:35:47 +0200 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
Mon, 29 Sep 2014 22:26:47 +0200 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
Mon, 29 Sep 2014 12:03:26 +0200 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
Sun, 28 Sep 2014 22:27:39 +0200 |
heinrichsweikamp |
logbook
|
Sun, 28 Sep 2014 18:44:07 +0200 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
Thu, 11 Sep 2014 15:41:48 +0200 |
heinrichsweikamp |
testing consumption
|
Wed, 10 Sep 2014 16:13:16 +0200 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
Wed, 10 Sep 2014 12:44:56 +0200 |
heinrichsweikamp |
clarify diluent change in the documentation
|
Tue, 09 Sep 2014 21:17:25 +0200 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
Tue, 09 Sep 2014 16:50:29 +0200 |
heinrichsweikamp |
skip fallback warning in OC modes
|
Mon, 08 Sep 2014 15:39:41 +0200 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
Mon, 08 Sep 2014 13:07:22 +0200 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
Thu, 04 Sep 2014 17:40:24 +0200 |
heinrichsweikamp |
nicer boot into surfacemode
|
Fri, 29 Aug 2014 08:58:27 +0200 |
heinrichsweikamp |
make new parameters configurable through pc
|
Thu, 28 Aug 2014 20:36:14 +0200 |
heinrichsweikamp |
minor
|
Thu, 28 Aug 2014 12:13:52 +0200 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
Wed, 27 Aug 2014 17:38:21 +0200 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
Thu, 21 Aug 2014 10:30:52 +0200 |
heinrichsweikamp |
minor
|
Thu, 21 Aug 2014 10:19:03 +0200 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
Mon, 18 Aug 2014 17:37:00 +0200 |
heinrichsweikamp |
work on flip screen...
|
Wed, 13 Aug 2014 17:43:41 +0200 |
heinrichsweikamp |
1.51beta start
|
Mon, 11 Aug 2014 11:32:44 +0200 |
heinrichsweikamp |
1.50 stable release
|
Wed, 06 Aug 2014 17:38:31 +0200 |
heinrichsweikamp |
some cleanup
|
Wed, 06 Aug 2014 11:59:04 +0200 |
heinrichsweikamp |
some cleanup
|
Tue, 05 Aug 2014 17:11:48 +0200 |
heinrichsweikamp |
fallback default = 1
|
Tue, 05 Aug 2014 16:55:09 +0200 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
Mon, 04 Aug 2014 12:10:35 +0200 |
heinrichsweikamp |
1.45 beta release
|
Sun, 03 Aug 2014 10:28:21 +0200 |
heinrichsweikamp |
seperate option table, place in address <0x10000
|
Thu, 31 Jul 2014 16:36:15 +0200 |
mh |
option_read and option_write eeprom banking
|
Thu, 31 Jul 2014 11:40:48 +0200 |
heinrichsweikamp |
New changelog.txt format
|
Fri, 18 Jul 2014 10:29:23 +0200 |
heinrichsweikamp |
1.44 beta release
|
Thu, 17 Jul 2014 17:56:09 +0200 |
heinrichsweikamp |
some cleanup
|
Thu, 17 Jul 2014 14:34:10 +0200 |
heinrichsweikamp |
minor: some extra protection against wrong gas selection
|
Thu, 17 Jul 2014 14:24:51 +0200 |
heinrichsweikamp |
Simplify gas change
|
Thu, 17 Jul 2014 13:29:25 +0200 |
heinrichsweikamp |
rename Deco Planner to Simulator
|
Wed, 16 Jul 2014 14:39:56 +0200 |
heinrichsweikamp |
minor
|
Tue, 15 Jul 2014 10:20:37 +0200 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
Mon, 14 Jul 2014 15:17:07 +0200 |
heinrichsweikamp |
BUGFIX: Surface interval was not displayed correctly in some cases
|
Tue, 08 Jul 2014 11:39:00 +0200 |
heinrichsweikamp |
Bugfix: Start dive mode simulator in correct depth
|
Fri, 04 Jul 2014 12:51:20 +0200 |
heinrichsweikamp |
NEW: Update warnings every second
|
Thu, 03 Jul 2014 19:34:41 +0200 |
heinrichsweikamp |
no safety stop during menu display
|
Thu, 03 Jul 2014 12:08:06 +0200 |
heinrichsweikamp |
minor cleanup
|
Tue, 01 Jul 2014 17:37:02 +0200 |
heinrichsweikamp |
catch timeout during set time/date command
|
Tue, 01 Jul 2014 14:48:17 +0200 |
heinrichsweikamp |
1.41beta release
|
Mon, 30 Jun 2014 10:58:02 +0200 |
heinrichsweikamp |
fix depth<0m display, ceiling
|
Sun, 29 Jun 2014 14:21:23 +0200 |
heinrichsweikamp |
minor
|
Sun, 29 Jun 2014 13:53:46 +0200 |
heinrichsweikamp |
cleanup
|
Sun, 29 Jun 2014 13:40:59 +0200 |
heinrichsweikamp |
add ceiling display
|
Fri, 27 Jun 2014 16:55:49 +0200 |
heinrichsweikamp |
Show %'s for non-GF deco model in surface mode
|
Fri, 27 Jun 2014 16:15:07 +0200 |
heinrichsweikamp |
minor
|
Fri, 27 Jun 2014 15:52:43 +0200 |
heinrichsweikamp |
battery check in sleep
|
Fri, 27 Jun 2014 10:44:06 +0200 |
heinrichsweikamp |
Do not show "GF info" for non-GF modes
|
Fri, 27 Jun 2014 10:18:41 +0200 |
heinrichsweikamp |
show heading with leading zeros
|
Wed, 25 Jun 2014 12:39:14 +0200 |
heinrichsweikamp |
minor
|
Mon, 23 Jun 2014 18:11:49 +0200 |
heinrichsweikamp |
show decomode in logbook and simulator w/o sensor type
|
Mon, 23 Jun 2014 17:55:27 +0200 |
heinrichsweikamp |
FIX: Gas volume computation when using several travel mix.
|
Mon, 23 Jun 2014 17:44:18 +0200 |
heinrichsweikamp |
minor fix: assert should pass for pure helium diluant
|
Mon, 23 Jun 2014 16:14:33 +0200 |
heinrichsweikamp |
Merge
|
Tue, 17 Jun 2014 12:10:33 +0200 |
heinrichsweikamp |
1.40 release
|
Tue, 17 Jun 2014 12:00:20 +0200 |
heinrichsweikamp |
Bugfix: CNS in planner
|
Tue, 10 Jun 2014 10:14:18 +0200 |
heinrichsweikamp |
BUGFIX: OSTC settings via USB issues
|
Thu, 05 Jun 2014 11:53:21 +0200 |
heinrichsweikamp |
Merge
|
Wed, 04 Jun 2014 19:19:18 +0200 |
heinrichsweikamp |
language updates
|
Thu, 05 Jun 2014 11:53:00 +0200 |
heinrichsweikamp |
BUGFIX: wrong ppo2 recording parameter in short header
|
Tue, 03 Jun 2014 13:20:44 +0200 |
heinrichsweikamp |
minor
|
Tue, 03 Jun 2014 13:20:05 +0200 |
heinrichsweikamp |
Show HUD voltages only in CCR mode...
|
Tue, 03 Jun 2014 12:25:47 +0200 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
Mon, 02 Jun 2014 12:54:12 +0200 |
heinrichsweikamp |
Minor language updates
|
Wed, 07 May 2014 14:57:58 +0200 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
Sun, 04 May 2014 21:23:09 +0200 |
heinrichsweikamp |
increase ir-timeout to 4 seconds
|
Fri, 02 May 2014 19:38:14 +0200 |
heinrichsweikamp |
1.30 release
|
Fri, 02 May 2014 14:13:35 +0200 |
heinrichsweikamp |
show event "bailout" in the internal logbook
|
Thu, 01 May 2014 21:16:31 +0200 |
heinrichsweikamp |
add event "bailout" in profile
|
Mon, 28 Apr 2014 16:26:31 +0200 |
heinrichsweikamp |
CHANGE: Always compute bailout plan based on all active gases
|
Mon, 28 Apr 2014 11:33:00 +0200 |
heinrichsweikamp |
auto-reset compass filtering data before calibration
|
Mon, 28 Apr 2014 10:17:18 +0200 |
heinrichsweikamp |
BUGFIX: Show "*" always in front of the initial Setpoint 1
|