Wed, 10 Dec 2014 09:13:49 +0100 |
heinrichsweikamp |
Merge
|
Wed, 10 Dec 2014 09:13:36 +0100 |
heinrichsweikamp |
minor
|
Sun, 07 Dec 2014 23:04:16 +0100 |
heinrichsweikamp |
do not clear char_O_deco_gas in copy_deco_table
|
Sun, 07 Dec 2014 18:03:05 +0100 |
heinrichsweikamp |
cleanup
|
Sun, 07 Dec 2014 12:47:19 +0100 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
Sat, 06 Dec 2014 21:04:27 +0100 |
heinrichsweikamp |
charge indicator on surface screen
|
Mon, 01 Dec 2014 17:06:53 +0100 |
heinrichsweikamp |
always reboot display in divemode
|
Wed, 26 Nov 2014 14:30:25 +0100 |
heinrichsweikamp |
Preparations for 1.7
|
Sun, 23 Nov 2014 22:33:41 +0100 |
heinrichsweikamp |
minor
|
Fri, 21 Nov 2014 11:51:53 +0100 |
heinrichsweikamp |
1.64 (Fix ambient light for cR)
|
Fri, 21 Nov 2014 11:10:07 +0100 |
heinrichsweikamp |
1.63beta release
|
Thu, 20 Nov 2014 20:32:36 +0100 |
heinrichsweikamp |
lower minimum backlight in eco mode
|
Wed, 12 Nov 2014 19:33:15 +0100 |
heinrichsweikamp |
cleanup
|
Tue, 11 Nov 2014 16:55:39 +0100 |
heinrichsweikamp |
minor
|
Mon, 10 Nov 2014 13:54:20 +0100 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
Thu, 06 Nov 2014 15:28:59 +0100 |
heinrichsweikamp |
cleanup
|
Thu, 06 Nov 2014 12:00:44 +0100 |
heinrichsweikamp |
suppress ghost readings for long, open cables
|
Wed, 05 Nov 2014 14:43:13 +0100 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
Tue, 04 Nov 2014 15:21:32 +0100 |
heinrichsweikamp |
1.62beta start
|
Mon, 03 Nov 2014 17:31:03 +0100 |
heinrichsweikamp |
reset voting logic on sensor switch
|
Mon, 03 Nov 2014 17:25:19 +0100 |
heinrichsweikamp |
voting logic for external monitoring
|
Thu, 30 Oct 2014 17:45:50 +0100 |
heinrichsweikamp |
minor
|
Wed, 29 Oct 2014 15:33:36 +0100 |
heinrichsweikamp |
limit sensor-read ppO2 to 2.55bar
|
Wed, 29 Oct 2014 12:53:01 +0100 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
Mon, 27 Oct 2014 11:28:48 +0100 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
Sat, 25 Oct 2014 15:28:18 +0200 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
Wed, 22 Oct 2014 18:09:01 +0200 |
heinrichsweikamp |
minor
|
Sat, 18 Oct 2014 10:03:28 +0200 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
Fri, 17 Oct 2014 13:31:14 +0200 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
Thu, 16 Oct 2014 13:11:18 +0200 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
Fri, 10 Oct 2014 11:13:54 +0200 |
heinrichsweikamp |
minor cleanup
|
Thu, 09 Oct 2014 11:18:56 +0200 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
Wed, 08 Oct 2014 17:57:37 +0200 |
heinrichsweikamp |
1.60 work...
|
Tue, 07 Oct 2014 14:21:46 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 07 Oct 2014 13:45:21 +0200 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
Tue, 07 Oct 2014 08:42:38 +0200 |
heinrichsweikamp |
Merge
|
Mon, 06 Oct 2014 23:47:08 +0200 |
heinrichsweikamp |
surface pressure copy in simulator
|
Mon, 06 Oct 2014 11:48:23 +0200 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
Sun, 05 Oct 2014 15:36:17 +0200 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
Wed, 01 Oct 2014 10:31:53 +0200 |
heinrichsweikamp |
minor
|
Tue, 30 Sep 2014 19:19:53 +0200 |
heinrichsweikamp |
BUGFIX: Future TTS in sensor mode
|
Tue, 30 Sep 2014 10:43:57 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 30 Sep 2014 10:35:47 +0200 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
Mon, 29 Sep 2014 22:26:47 +0200 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
Mon, 29 Sep 2014 12:03:26 +0200 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
Sun, 28 Sep 2014 22:27:39 +0200 |
heinrichsweikamp |
logbook
|
Sun, 28 Sep 2014 18:44:07 +0200 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
Thu, 11 Sep 2014 15:41:48 +0200 |
heinrichsweikamp |
testing consumption
|
Wed, 10 Sep 2014 16:13:16 +0200 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
Wed, 10 Sep 2014 12:44:56 +0200 |
heinrichsweikamp |
clarify diluent change in the documentation
|
Tue, 09 Sep 2014 21:17:25 +0200 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
Tue, 09 Sep 2014 16:50:29 +0200 |
heinrichsweikamp |
skip fallback warning in OC modes
|
Mon, 08 Sep 2014 15:39:41 +0200 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
Mon, 08 Sep 2014 13:07:22 +0200 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
Thu, 04 Sep 2014 17:40:24 +0200 |
heinrichsweikamp |
nicer boot into surfacemode
|
Fri, 29 Aug 2014 08:58:27 +0200 |
heinrichsweikamp |
make new parameters configurable through pc
|
Thu, 28 Aug 2014 20:36:14 +0200 |
heinrichsweikamp |
minor
|
Thu, 28 Aug 2014 12:13:52 +0200 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
Wed, 27 Aug 2014 17:38:21 +0200 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
Thu, 21 Aug 2014 10:30:52 +0200 |
heinrichsweikamp |
minor
|
Thu, 21 Aug 2014 10:19:03 +0200 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
Mon, 18 Aug 2014 17:37:00 +0200 |
heinrichsweikamp |
work on flip screen...
|
Wed, 13 Aug 2014 17:43:41 +0200 |
heinrichsweikamp |
1.51beta start
|
Mon, 11 Aug 2014 11:32:44 +0200 |
heinrichsweikamp |
1.50 stable release
|
Wed, 06 Aug 2014 17:38:31 +0200 |
heinrichsweikamp |
some cleanup
|
Wed, 06 Aug 2014 11:59:04 +0200 |
heinrichsweikamp |
some cleanup
|
Tue, 05 Aug 2014 17:11:48 +0200 |
heinrichsweikamp |
fallback default = 1
|
Tue, 05 Aug 2014 16:55:09 +0200 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
Mon, 04 Aug 2014 12:10:35 +0200 |
heinrichsweikamp |
1.45 beta release
|
Sun, 03 Aug 2014 10:28:21 +0200 |
heinrichsweikamp |
seperate option table, place in address <0x10000
|
Thu, 31 Jul 2014 16:36:15 +0200 |
mh |
option_read and option_write eeprom banking
|
Thu, 31 Jul 2014 11:40:48 +0200 |
heinrichsweikamp |
New changelog.txt format
|
Fri, 18 Jul 2014 10:29:23 +0200 |
heinrichsweikamp |
1.44 beta release
|
Thu, 17 Jul 2014 17:56:09 +0200 |
heinrichsweikamp |
some cleanup
|
Thu, 17 Jul 2014 14:34:10 +0200 |
heinrichsweikamp |
minor: some extra protection against wrong gas selection
|
Thu, 17 Jul 2014 14:24:51 +0200 |
heinrichsweikamp |
Simplify gas change
|
Thu, 17 Jul 2014 13:29:25 +0200 |
heinrichsweikamp |
rename Deco Planner to Simulator
|
Wed, 16 Jul 2014 14:39:56 +0200 |
heinrichsweikamp |
minor
|
Tue, 15 Jul 2014 10:20:37 +0200 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
Mon, 14 Jul 2014 15:17:07 +0200 |
heinrichsweikamp |
BUGFIX: Surface interval was not displayed correctly in some cases
|
Tue, 08 Jul 2014 11:39:00 +0200 |
heinrichsweikamp |
Bugfix: Start dive mode simulator in correct depth
|
Fri, 04 Jul 2014 12:51:20 +0200 |
heinrichsweikamp |
NEW: Update warnings every second
|
Thu, 03 Jul 2014 19:34:41 +0200 |
heinrichsweikamp |
no safety stop during menu display
|
Thu, 03 Jul 2014 12:08:06 +0200 |
heinrichsweikamp |
minor cleanup
|
Tue, 01 Jul 2014 17:37:02 +0200 |
heinrichsweikamp |
catch timeout during set time/date command
|
Tue, 01 Jul 2014 14:48:17 +0200 |
heinrichsweikamp |
1.41beta release
|
Mon, 30 Jun 2014 10:58:02 +0200 |
heinrichsweikamp |
fix depth<0m display, ceiling
|
Sun, 29 Jun 2014 14:21:23 +0200 |
heinrichsweikamp |
minor
|
Sun, 29 Jun 2014 13:53:46 +0200 |
heinrichsweikamp |
cleanup
|
Sun, 29 Jun 2014 13:40:59 +0200 |
heinrichsweikamp |
add ceiling display
|
Fri, 27 Jun 2014 16:55:49 +0200 |
heinrichsweikamp |
Show %'s for non-GF deco model in surface mode
|
Fri, 27 Jun 2014 16:15:07 +0200 |
heinrichsweikamp |
minor
|
Fri, 27 Jun 2014 15:52:43 +0200 |
heinrichsweikamp |
battery check in sleep
|
Fri, 27 Jun 2014 10:44:06 +0200 |
heinrichsweikamp |
Do not show "GF info" for non-GF modes
|
Fri, 27 Jun 2014 10:18:41 +0200 |
heinrichsweikamp |
show heading with leading zeros
|
Wed, 25 Jun 2014 12:39:14 +0200 |
heinrichsweikamp |
minor
|
Mon, 23 Jun 2014 18:11:49 +0200 |
heinrichsweikamp |
show decomode in logbook and simulator w/o sensor type
|
Mon, 23 Jun 2014 17:55:27 +0200 |
heinrichsweikamp |
FIX: Gas volume computation when using several travel mix.
|
Mon, 23 Jun 2014 17:44:18 +0200 |
heinrichsweikamp |
minor fix: assert should pass for pure helium diluant
|
Mon, 23 Jun 2014 16:14:33 +0200 |
heinrichsweikamp |
Merge
|
Tue, 17 Jun 2014 12:10:33 +0200 |
heinrichsweikamp |
1.40 release
|
Tue, 17 Jun 2014 12:00:20 +0200 |
heinrichsweikamp |
Bugfix: CNS in planner
|
Tue, 10 Jun 2014 10:14:18 +0200 |
heinrichsweikamp |
BUGFIX: OSTC settings via USB issues
|
Thu, 05 Jun 2014 11:53:21 +0200 |
heinrichsweikamp |
Merge
|
Wed, 04 Jun 2014 19:19:18 +0200 |
heinrichsweikamp |
language updates
|
Thu, 05 Jun 2014 11:53:00 +0200 |
heinrichsweikamp |
BUGFIX: wrong ppo2 recording parameter in short header
|
Tue, 03 Jun 2014 13:20:44 +0200 |
heinrichsweikamp |
minor
|
Tue, 03 Jun 2014 13:20:05 +0200 |
heinrichsweikamp |
Show HUD voltages only in CCR mode...
|
Tue, 03 Jun 2014 12:25:47 +0200 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
Mon, 02 Jun 2014 12:54:12 +0200 |
heinrichsweikamp |
Minor language updates
|
Wed, 07 May 2014 14:57:58 +0200 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
Sun, 04 May 2014 21:23:09 +0200 |
heinrichsweikamp |
increase ir-timeout to 4 seconds
|