2016-10-10 |
heinrichsweikamp |
repeated init (For screen 2 issues)
|
2016-10-10 |
heinrichsweikamp |
French/Italian release
|
2016-10-10 |
heinrichsweikamp |
2.10 release
|
2016-09-28 |
heinrichsweikamp |
show language version in information menu
|
2016-09-28 |
heinrichsweikamp |
recover old battery status prior 2.09
|
2016-09-27 |
heinrichsweikamp |
2.1 stable work...
|
2016-09-27 |
heinrichsweikamp |
NEW: Store more battery info into logbook memory
|
2016-09-27 |
heinrichsweikamp |
minor: fix some alignments for OSTC cR
|
2016-09-19 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
2016-09-01 |
heinrichsweikamp |
changelog
|
2016-09-01 |
heinrichsweikamp |
speedup analog presses
|
2016-08-31 |
heinrichsweikamp |
bugfix "old battery" type
|
2016-08-31 |
heinrichsweikamp |
minor
|
2016-08-30 |
heinrichsweikamp |
work on new battery options
|
2016-08-29 |
heinrichsweikamp |
minor
|
2016-08-19 |
heinrichsweikamp |
minor
|
2016-08-18 |
heinrichsweikamp |
minor: Default timeout is 5min
|
2016-08-17 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
2016-07-26 |
heinrichsweikamp |
minor
|
2016-07-26 |
heinrichsweikamp |
doc update
|
2016-07-26 |
heinrichsweikamp |
+BUGFIX: Compatibility with "hwOS Config" fixed
|
2016-07-13 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
2016-07-12 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
2016-07-06 |
heinrichsweikamp |
2.09 beta start
|
2016-06-30 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
2016-06-24 |
heinrichsweikamp |
no screen reboot after logbook exit
|
2016-06-23 |
heinrichsweikamp |
Logbook marker temporally disabled in internal logbook
|
2016-06-22 |
heinrichsweikamp |
hunting a bug in the logbook (Day 3)
|
2016-06-22 |
heinrichsweikamp |
minor
|
2016-06-22 |
heinrichsweikamp |
hunting a bug in the logbook (Day 2)
|
2016-06-21 |
heinrichsweikamp |
hunting a bug in the logbook...
|
2016-06-21 |
heinrichsweikamp |
minor
|
2016-06-16 |
heinrichsweikamp |
hardware_flag handling
|
2016-06-15 |
heinrichsweikamp |
some cleanup
|
2016-06-14 |
heinrichsweikamp |
add code for new compass chip
|
2016-06-10 |
heinrichsweikamp |
docu update
|
2016-05-13 |
heinrichsweikamp |
minor
|
2016-05-12 |
heinrichsweikamp |
ignore 0x47 for standard hwOS
|
2016-05-02 |
heinrichsweikamp |
_another_ timing fix for firmware updates (2.07 was not published yet anyway)
|
2016-04-29 |
heinrichsweikamp |
2.07 release
|
2016-04-29 |
heinrichsweikamp |
fix Page-Program timing
|
2016-04-29 |
heinrichsweikamp |
fix handling for new flash memory chip
|
2016-04-25 |
heinrichsweikamp |
CHANGE: Remove ppO2 [Dil] from OC dive mode screen
|
2016-04-19 |
heinrichsweikamp |
some cleanup
|
2016-04-18 |
heinrichsweikamp |
minor
|
2016-04-18 |
heinrichsweikamp |
NEW: Support for new logbook memory chip (minor hardware change)
|
2016-04-10 |
heinrichsweikamp |
minor
|
2016-03-29 |
heinrichsweikamp |
support for new flash memory
|
2016-03-22 |
heinrichsweikamp |
NEW: New Customview shows ppO2(O2) and ppO2(Diluent) during CCR mode
|
2016-03-15 |
heinrichsweikamp |
2.04beta start
|
2016-03-11 |
heinrichsweikamp |
BUGFIX: Fix missing ccr setup menu (From 2.02)
|
2016-03-08 |
heinrichsweikamp |
BUGFIX: Fix rare issue after battery change (OSTC3 did not start properly)
|
2016-02-24 |
heinrichsweikamp |
minor docu update
|
2016-02-02 |
heinrichsweikamp |
2.01 release
|
2016-02-02 |
heinrichsweikamp |
changelog
|
2016-02-02 |
heinrichsweikamp |
Minor language updates
|
2016-02-01 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
2016-01-11 |
heinrichsweikamp |
2.00 release
|
2016-01-10 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
2016-01-10 |
heinrichsweikamp |
NEW: Logbook shows markers with small orange boxes in the profile
|
2016-01-09 |
heinrichsweikamp |
Logbook marker can be set in dive mode menu (OC only)
|
2015-12-10 |
heinrichsweikamp |
1.94beta release
|
2015-11-24 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
2015-11-23 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
2015-11-23 |
heinrichsweikamp |
some documentation added
|
2015-11-23 |
heinrichsweikamp |
place total dives backup counter in eeprom 16:17
|
2015-11-16 |
heinrichsweikamp |
1.93 release
|
2015-11-06 |
heinrichsweikamp |
BUGFIX: minor text allignment in CCR mode
|
2015-11-05 |
heinrichsweikamp |
tweak response timing in comm mode
|
2015-11-03 |
heinrichsweikamp |
NEW: Show actual dive count in logbook list view (If <1000)
|
2015-11-02 |
heinrichsweikamp |
add profile version to compact headers
|
2015-10-28 |
heinrichsweikamp |
Fix text alignment for French version
|
2015-10-27 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
2015-10-19 |
heinrichsweikamp |
BUGFIX: German texts in ppo2 menu were too long for screen resulting in resulting in text display issues
|
2015-10-09 |
heinrichsweikamp |
1.90 release
|
2015-10-07 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
2015-10-07 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
2015-10-06 |
heinrichsweikamp |
minor language update (german)
|
2015-09-30 |
heinrichsweikamp |
language updates
|
2015-09-23 |
heinrichsweikamp |
allow compass bearing on surface
|
2015-09-19 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
2015-09-15 |
heinrichsweikamp |
Merge
|
2015-09-11 |
heinrichsweikamp |
minor
|
2015-09-15 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
2015-09-10 |
heinrichsweikamp |
set char_I_current_gas for gas6 use
|
2015-09-07 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
2015-08-27 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
2015-08-25 |
heinrichsweikamp |
docu update
|
2015-08-21 |
heinrichsweikamp |
1.87 release
|
2015-08-19 |
heinrichsweikamp |
logbook work
|
2015-08-19 |
heinrichsweikamp |
fix some display issues with display1
|
2015-08-18 |
heinrichsweikamp |
debugging the compass screen
|
2015-08-18 |
heinrichsweikamp |
fixing some layout issues
|
2015-08-16 |
heinrichsweikamp |
Additional temperature calibration via PC interface
|
2015-08-15 |
heinrichsweikamp |
jump to 1.87
|
2015-08-15 |
heinrichsweikamp |
tft timings
|
2015-08-12 |
heinrichsweikamp |
minor
|
2015-08-05 |
heinrichsweikamp |
french update
|
2015-08-04 |
heinrichsweikamp |
cleanup
|
2015-08-04 |
heinrichsweikamp |
changelog
|
2015-08-04 |
heinrichsweikamp |
1.85beta release
|
2015-08-03 |
heinrichsweikamp |
hardware support
|
2015-08-03 |
heinrichsweikamp |
make AUTO SP available on OSTC2 hardware
|
2015-08-03 |
heinrichsweikamp |
french update
|
2015-08-02 |
heinrichsweikamp |
BUGFIX: Auto-Brightness clipped to lowest settings in bright sunlight on some devices
|
2015-08-02 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
2015-07-31 |
heinrichsweikamp |
hud v3 support
|
2015-07-29 |
heinrichsweikamp |
some cleanups
|
2015-07-28 |
heinrichsweikamp |
NEW: Quit Simulator automatically when starting a real dive
|
2015-07-28 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
2015-07-24 |
jdg |
BUGFIX gas volume: do not forget deco gas with switch >= dive's bottom depth.
|
2015-07-23 |
heinrichsweikamp |
some cleanups
|
2015-07-23 |
heinrichsweikamp |
docu update
|
2015-07-15 |
jDG |
[FIX] GasVolume: missing gas changes w/o stops.
|
2015-07-22 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
2015-07-21 |
heinrichsweikamp |
New option to download "Compact Headers". Improved BLE support (OSTC 2 and OSTC 3+), updated OSTC interface documentation
|
2015-07-20 |
heinrichsweikamp |
re-arrange settings menu
|
2015-07-20 |
heinrichsweikamp |
CHANGE: GF and aGF high range increased to 45-110%
|
2015-07-20 |
heinrichsweikamp |
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
|
2015-07-15 |
jDG |
Fix low_depth shall be stored as a float (no rounding).
|
2015-07-06 |
heinrichsweikamp |
Show ppo2 <1bar with leading zero
|
2015-07-03 |
heinrichsweikamp |
changelog
|
2015-07-03 |
heinrichsweikamp |
minor: fix calc_deko_divemode_sensor
|
2015-07-03 |
heinrichsweikamp |
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
|
2015-06-28 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
2015-06-28 |
Janos Kovacs |
Merged new_screen_layout into default
|
2015-06-28 |
janos_kovacs |
Always show ppO2 (warning position, standard color) option
new_screen_layout
|
2015-06-28 |
Janos Kovacs |
Merged new_screen_layout into default
|
2015-06-28 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
2015-06-28 |
Janos Kovacs |
Fix positions if no VSI Bar displayed
new_screen_layout
|
2015-06-26 |
Janos Kovacs |
Merged new_screen_layout into default
|
2015-06-24 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
2015-06-21 |
heinrichsweikamp |
change button sensitivity range and default
|
2015-06-14 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
2015-06-13 |
janos_kovacs |
Small fix for the custom grid layout
new_screen_layout
|
2015-06-13 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
2015-06-13 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
2015-06-13 |
jdg |
FIX NDL prediction error with Buhlmann model: might be desaturating too fast.
|
2015-06-12 |
jDG |
FIX minor assert: separate diluant list means current gas can go up to 10.
|
2015-06-12 |
jDG |
FIX 16bits CNS feedback: assert CNS up to 999%
|
2015-06-11 |
janos_kovacs |
VSIbar #3f: roll back debug color
new_screen_layout
|
2015-06-11 |
janos_kovacs |
VSIbar #3e: additional filter on zero ascend rate
new_screen_layout
|
2015-06-11 |
heinrichsweikamp |
move flag13 into bank common
new_screen_layout
|
2015-06-11 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
2015-06-11 |
janos_kovacs |
VSIbar #3c: extra steps to keep calculation clear
new_screen_layout
|
2015-06-10 |
janos_kovacs |
VSIbar #3b: small fix on the bar's width
new_screen_layout
|
2015-06-10 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
2015-06-10 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
2015-06-10 |
jDG |
FIX minor comment about deco offset unit...
|
2015-06-09 |
heinrichsweikamp |
Config table for alternative display
|
2015-06-09 |
jdg |
FIX missing extern .C definition.
|
2015-06-07 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
2015-06-07 |
janos_kovacs |
VSIbar #1: layout position changes
new_screen_layout
|
2015-06-05 |
Janos Kovacs |
VSI text v2 merged from new_screen_layout into default
|
2015-06-02 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
2015-06-02 |
Janos Kovacs |
Merge default back to the new_screen_layout development branch
new_screen_layout
|
2015-06-02 |
heinrichsweikamp |
rename tMODwarning
|
2015-06-01 |
heinrichsweikamp |
Merge with new_screen_layout
|
2015-06-01 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
2015-06-01 |
heinrichsweikamp |
default branch
|
2015-06-01 |
heinrichsweikamp |
New screen layout test
new_screen_layout
|
2015-05-31 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
2015-05-31 |
heinrichsweikamp |
Make char_I_bottom_usage and char_I_deco_usage configurable from PC
|
2015-05-31 |
heinrichsweikamp |
new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
|
2015-05-31 |
heinrichsweikamp |
German tGasUsage
|
2015-05-31 |
jDG |
Slight more efficient bail deco, Test with 2 bail tanks.
|
2015-05-31 |
jDG |
NEW CCR decoplan: 2nd pass to display bailout stops and gas volumes
|
2015-05-30 |
jDG |
FIX clear before displaying gas volumes.
|
2015-05-30 |
jDG |
FIX tests to use plans copyed from actual OSTC3 1.82 computer.
|
2015-05-30 |
jDG |
ADD (back) Gas Volumes display after decoplanning.
|
2015-05-30 |
jDG |
ADD tGasUsage, with FR translation (and DE,IT defaults)
|
2015-05-29 |
jdg |
NEW gas_volume unit test in CCR mode. Works too.
|
2015-05-29 |
jdg |
[mq]: 2015-05-29_02-40-44_r288+.diff
|
2015-05-29 |
jdg |
FIX gas_volume shall read gas switches from char_O_deco_gas
|
2015-05-29 |
jdg |
FIX gas_volumes: shall take stops in forward order.
|
2015-05-29 |
jdg |
NEW test w/o stops and with stops
|
2015-05-28 |
jdg |
NEW unit tests for gas volumes...
|
2015-05-28 |
heinrichsweikamp |
preperations to compute gas consumtion in simulator
|
2015-05-27 |
heinrichsweikamp |
1.82beta with new compass calib code
|
2015-05-22 |
jDG |
Make a more compact COMPASS calibration code (<7KB), and add more tests.
|
2015-05-26 |
heinrichsweikamp |
BUGFIX: Fix download issue for dives made with 1.80 firmware
|
2015-05-26 |
heinrichsweikamp |
doku update
|
2015-05-26 |
heinrichsweikamp |
bugfix wrong profile length in header
|
2015-05-18 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
2015-05-18 |
heinrichsweikamp |
1.79beta - update internal sensor registers during boot
|
2015-05-12 |
heinrichsweikamp |
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
|
2015-05-07 |
heinrichsweikamp |
rename into hwOS
|
2015-05-05 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
2015-05-04 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
2015-04-29 |
heinrichsweikamp |
1.78 release
|
2015-04-28 |
heinrichsweikamp |
Update digital ppO2 data automatically
|
2015-04-22 |
heinrichsweikamp |
increase min input voltage from 1,2mV to 1,9mV (cR only)
|
2015-04-20 |
heinrichsweikamp |
adjust menu for different hardware versions
|
2015-04-19 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
2015-04-16 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
2015-04-14 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|
2015-03-30 |
heinrichsweikamp |
1.76 release
|
2015-03-26 |
janos_kovacs |
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.
|
2015-03-26 |
heinrichsweikamp |
show unit8 options in menu left-aligned
|
2015-03-26 |
heinrichsweikamp |
bugfix dynamic gas list
|
2015-03-25 |
heinrichsweikamp |
language update
|
2015-03-24 |
heinrichsweikamp |
increase immunity against false Qi data
|
2015-03-23 |
heinrichsweikamp |
minor cleanup
|
2015-03-23 |
heinrichsweikamp |
patch for bearing issue
|
2015-03-23 |
heinrichsweikamp |
minor speed and size improvements for the compass routine
|
2015-03-23 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
2015-03-23 |
heinrichsweikamp |
add bearing option to compass
|
2015-03-20 |
heinrichsweikamp |
preparations to set a course for the compass display
|
2015-03-19 |
heinrichsweikamp |
another icon update
|
2015-03-19 |
heinrichsweikamp |
change warning sign
|
2015-03-18 |
heinrichsweikamp |
some cleanup, temporaly disable dive_warning.inc
|
2015-03-18 |
heinrichsweikamp |
Graphical compass from kovacs
|
2015-03-17 |
heinrichsweikamp |
ignore sensor for non-sensor hardware
|
2015-03-16 |
heinrichsweikamp |
support hardware_flag for all possible hardware combinations
|
2015-03-13 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
2015-03-05 |
heinrichsweikamp |
minor docu update
|
2015-03-04 |
heinrichsweikamp |
use single-byte hardware flag (again)
|
2015-03-04 |
heinrichsweikamp |
minor docu update (removed typo)
|
2015-03-04 |
heinrichsweikamp |
auto-select correct settings menu
|
2015-03-03 |
heinrichsweikamp |
expand hardware_flag to 4 bytes
|
2015-03-02 |
heinrichsweikamp |
docu update
|
2015-03-02 |
heinrichsweikamp |
auto-select correct ccr menu
|
2015-03-01 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
2015-03-01 |
heinrichsweikamp |
cleanup
|
2015-02-26 |
heinrichsweikamp |
1.75 release
|
2015-02-25 |
heinrichsweikamp |
configure hardware_flag byte
|
2015-02-25 |
heinrichsweikamp |
under construction: new hardware_flag to configure different hardware versions
|
2015-02-25 |
heinrichsweikamp |
Show OSTC2-like active gas boxes in surface mode
|
2015-02-25 |
heinrichsweikamp |
show start gas in normal font
|
2015-02-22 |
mh |
show start gas in OC mode permanently
|
2015-02-21 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
2015-02-19 |
mh |
Bugfix: Check for divemode before checking for menu
|
2015-02-18 |
mh |
minor cleanup
|
2015-02-05 |
heinrichsweikamp |
1.74 release
|
2015-02-02 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
2015-02-02 |
heinrichsweikamp |
button config (cR)
|
2015-02-01 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
2015-01-29 |
heinrichsweikamp |
temporally disable "Copy disable flags from digital input" routine
|
2015-01-14 |
heinrichsweikamp |
PC config, 1.72 release
|
2015-01-06 |
heinrichsweikamp |
check opt_max correctly
|
2015-01-05 |
heinrichsweikamp |
minor: configure buttons during splash screen
|
2015-01-05 |
heinrichsweikamp |
make button sensitivity configurable (cR hardware)
|
2015-01-04 |
heinrichsweikamp |
init new 4kB Page in logbook memory when pointer is not valid.
|
2014-12-19 |
heinrichsweikamp |
1.71beta start
|
2014-12-17 |
heinrichsweikamp |
1.7 release
|
2014-12-15 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
2014-12-15 |
heinrichsweikamp |
ignore battery menu for cr
|
2014-12-14 |
heinrichsweikamp |
compass changes
|
2014-12-13 |
heinrichsweikamp |
layout changes
|
2014-12-10 |
heinrichsweikamp |
Merge
|
2014-12-10 |
heinrichsweikamp |
minor
|
2014-12-07 |
heinrichsweikamp |
do not clear char_O_deco_gas in copy_deco_table
|
2014-12-07 |
heinrichsweikamp |
cleanup
|
2014-12-07 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
2014-12-06 |
heinrichsweikamp |
charge indicator on surface screen
|
2014-12-01 |
heinrichsweikamp |
always reboot display in divemode
|
2014-11-26 |
heinrichsweikamp |
Preparations for 1.7
|
2014-11-23 |
heinrichsweikamp |
minor
|
2014-11-21 |
heinrichsweikamp |
1.64 (Fix ambient light for cR)
|
2014-11-21 |
heinrichsweikamp |
1.63beta release
|
2014-11-20 |
heinrichsweikamp |
lower minimum backlight in eco mode
|
2014-11-12 |
heinrichsweikamp |
cleanup
|
2014-11-11 |
heinrichsweikamp |
minor
|
2014-11-10 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
2014-11-06 |
heinrichsweikamp |
cleanup
|
2014-11-06 |
heinrichsweikamp |
suppress ghost readings for long, open cables
|
2014-11-05 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
2014-11-04 |
heinrichsweikamp |
1.62beta start
|
2014-11-03 |
heinrichsweikamp |
reset voting logic on sensor switch
|
2014-11-03 |
heinrichsweikamp |
voting logic for external monitoring
|
2014-10-30 |
heinrichsweikamp |
minor
|
2014-10-29 |
heinrichsweikamp |
limit sensor-read ppO2 to 2.55bar
|
2014-10-29 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
2014-10-27 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
2014-10-25 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
2014-10-22 |
heinrichsweikamp |
minor
|
2014-10-18 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
2014-10-17 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
2014-10-16 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
2014-10-10 |
heinrichsweikamp |
minor cleanup
|
2014-10-09 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
2014-10-08 |
heinrichsweikamp |
1.60 work...
|
2014-10-07 |
heinrichsweikamp |
1.54 beta start
|
2014-10-07 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
2014-10-07 |
heinrichsweikamp |
Merge
|
2014-10-06 |
heinrichsweikamp |
surface pressure copy in simulator
|
2014-10-06 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
2014-10-05 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
2014-10-01 |
heinrichsweikamp |
minor
|
2014-09-30 |
heinrichsweikamp |
BUGFIX: Future TTS in sensor mode
|
2014-09-30 |
heinrichsweikamp |
1.54 beta start
|
2014-09-30 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
2014-09-29 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
2014-09-29 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
2014-09-28 |
heinrichsweikamp |
logbook
|
2014-09-28 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
2014-09-11 |
heinrichsweikamp |
testing consumption
|
2014-09-10 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
2014-09-10 |
heinrichsweikamp |
clarify diluent change in the documentation
|
2014-09-09 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
2014-09-09 |
heinrichsweikamp |
skip fallback warning in OC modes
|
2014-09-08 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
2014-09-08 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
2014-09-04 |
heinrichsweikamp |
nicer boot into surfacemode
|
2014-08-29 |
heinrichsweikamp |
make new parameters configurable through pc
|
2014-08-28 |
heinrichsweikamp |
minor
|
2014-08-28 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
2014-08-27 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
2014-08-21 |
heinrichsweikamp |
minor
|
2014-08-21 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
2014-08-18 |
heinrichsweikamp |
work on flip screen...
|
2014-08-13 |
heinrichsweikamp |
1.51beta start
|
2014-08-11 |
heinrichsweikamp |
1.50 stable release
|
2014-08-06 |
heinrichsweikamp |
some cleanup
|
2014-08-06 |
heinrichsweikamp |
some cleanup
|
2014-08-05 |
heinrichsweikamp |
fallback default = 1
|
2014-08-05 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
2014-08-04 |
heinrichsweikamp |
1.45 beta release
|
2014-08-03 |
heinrichsweikamp |
seperate option table, place in address <0x10000
|
2014-07-31 |
mh |
option_read and option_write eeprom banking
|
2014-07-31 |
heinrichsweikamp |
New changelog.txt format
|
2014-07-18 |
heinrichsweikamp |
1.44 beta release
|
2014-07-17 |
heinrichsweikamp |
some cleanup
|
2014-07-17 |
heinrichsweikamp |
minor: some extra protection against wrong gas selection
|
2014-07-17 |
heinrichsweikamp |
Simplify gas change
|
2014-07-17 |
heinrichsweikamp |
rename Deco Planner to Simulator
|
2014-07-16 |
heinrichsweikamp |
minor
|
2014-07-15 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
2014-07-14 |
heinrichsweikamp |
BUGFIX: Surface interval was not displayed correctly in some cases
|
2014-07-08 |
heinrichsweikamp |
Bugfix: Start dive mode simulator in correct depth
|
2014-07-04 |
heinrichsweikamp |
NEW: Update warnings every second
|
2014-07-03 |
heinrichsweikamp |
no safety stop during menu display
|
2014-07-03 |
heinrichsweikamp |
minor cleanup
|
2014-07-01 |
heinrichsweikamp |
catch timeout during set time/date command
|
2014-07-01 |
heinrichsweikamp |
1.41beta release
|
2014-06-30 |
heinrichsweikamp |
fix depth<0m display, ceiling
|
2014-06-29 |
heinrichsweikamp |
minor
|
2014-06-29 |
heinrichsweikamp |
cleanup
|
2014-06-29 |
heinrichsweikamp |
add ceiling display
|
2014-06-27 |
heinrichsweikamp |
Show %'s for non-GF deco model in surface mode
|
2014-06-27 |
heinrichsweikamp |
minor
|
2014-06-27 |
heinrichsweikamp |
battery check in sleep
|
2014-06-27 |
heinrichsweikamp |
Do not show "GF info" for non-GF modes
|
2014-06-27 |
heinrichsweikamp |
show heading with leading zeros
|
2014-06-25 |
heinrichsweikamp |
minor
|
2014-06-23 |
heinrichsweikamp |
show decomode in logbook and simulator w/o sensor type
|
2014-06-23 |
heinrichsweikamp |
FIX: Gas volume computation when using several travel mix.
|
2014-06-23 |
heinrichsweikamp |
minor fix: assert should pass for pure helium diluant
|
2014-06-23 |
heinrichsweikamp |
Merge
|
2014-06-17 |
heinrichsweikamp |
1.40 release
|
2014-06-17 |
heinrichsweikamp |
Bugfix: CNS in planner
|
2014-06-10 |
heinrichsweikamp |
BUGFIX: OSTC settings via USB issues
|
2014-06-05 |
heinrichsweikamp |
Merge
|
2014-06-04 |
heinrichsweikamp |
language updates
|
2014-06-05 |
heinrichsweikamp |
BUGFIX: wrong ppo2 recording parameter in short header
|
2014-06-03 |
heinrichsweikamp |
minor
|
2014-06-03 |
heinrichsweikamp |
Show HUD voltages only in CCR mode...
|
2014-06-03 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
2014-06-02 |
heinrichsweikamp |
Minor language updates
|
2014-05-07 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
2014-05-04 |
heinrichsweikamp |
increase ir-timeout to 4 seconds
|
2014-05-02 |
heinrichsweikamp |
1.30 release
|
2014-05-02 |
heinrichsweikamp |
show event "bailout" in the internal logbook
|
2014-05-01 |
heinrichsweikamp |
add event "bailout" in profile
|
2014-04-28 |
heinrichsweikamp |
CHANGE: Always compute bailout plan based on all active gases
|
2014-04-28 |
heinrichsweikamp |
auto-reset compass filtering data before calibration
|
2014-04-28 |
heinrichsweikamp |
BUGFIX: Show "*" always in front of the initial Setpoint 1
|
2014-04-22 |
heinrichsweikamp |
BUGFIX: compass calibration does now timeout automatically after 60s
|
2014-04-17 |
heinrichsweikamp |
clear pressure sensor compensation upon update
|
2014-04-16 |
heinrichsweikamp |
add sensor calibration option (PC only), some cleanup
|
2014-04-15 |
heinrichsweikamp |
minor, always re-init compass in calibration loop
|
2014-04-15 |
heinrichsweikamp |
NEW: automatic compass gain makes calibration quicker
|
2014-04-15 |
heinrichsweikamp |
BUGFIX: No average depth for end-of-dive portion (<1m)
|
2014-04-14 |
heinrichsweikamp |
fix minor display bug (battery percent)
|
2014-04-02 |
heinrichsweikamp |
CHANGE: Color schemes improved
|
2014-04-02 |
heinrichsweikamp |
CHANGE: No warning sign for selected aGF
|
2014-03-31 |
heinrichsweikamp |
No graphical output (yet)
|
2014-03-31 |
heinrichsweikamp |
Minor french update
|
2014-03-17 |
heinrichsweikamp |
Test with graphic compass
|
2014-03-10 |
heinrichsweikamp |
1.23 release
|
2014-02-28 |
mh |
add some extra safety checks when settings were altered from the PC software
|
2014-02-27 |
mh |
new commands in download mode:
|
2014-02-27 |
mh |
new command in download mode: "r" - read setting
|
2014-02-26 |
mh |
BUGFIX: Reset Logbook did not reset Logbook TOC properly
|
2014-02-20 |
heinrichsweikamp |
BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
|
2014-02-19 |
heinrichsweikamp |
1.21 release
|
2014-02-11 |
heinrichsweikamp |
change log
|
2014-02-10 |
heinrichsweikamp |
1.2RC
|
2014-02-10 |
heinrichsweikamp |
Merge with ClaudeDive_Translations
|
2014-02-04 |
heinrichsweikamp |
another update from claudedive
ClaudeDive_Translations
|
2014-02-04 |
heinrichsweikamp |
1.13 beta start
|
2014-02-04 |
heinrichsweikamp |
french update
ClaudeDive_Translations
|
2014-02-02 |
heinrichsweikamp |
+CHANGE: Some French Translations
|
2014-02-01 |
heinrichsweikamp |
BUGFIX: Set Day for months <31 days
|
2014-01-11 |
heinrichsweikamp |
second debug mode page
|
2014-01-11 |
heinrichsweikamp |
BUGFIX: Maintain last selected customview in surface mode
|
2014-01-10 |
heinrichsweikamp |
change log
|
2014-01-10 |
heinrichsweikamp |
Merge
|
2013-12-19 |
heinrichsweikamp |
allow logbook erase from reset menu
|
2014-01-10 |
heinrichsweikamp |
show battery voltage in info menu
|
2013-12-04 |
heinrichsweikamp |
1.1 release
|
2013-12-03 |
heinrichsweikamp |
BUGFIX: Display Desat.-Time >100 hours
|
2013-12-01 |
heinrichsweikamp |
Backlight level in eco mode
|
2013-11-20 |
heinrichsweikamp |
startup with 1.6 hardware
|
2013-10-02 |
heinrichsweikamp |
minor
|
2013-10-02 |
heinrichsweikamp |
another small French update
|
2013-09-29 |
heinrichsweikamp |
Change "O2" warning to "ppO2"
|
2013-09-29 |
heinrichsweikamp |
some cleanup/changelog
|
2013-09-29 |
heinrichsweikamp |
NEW: Dynamic Gaslist in OC mode (Divemode, Customview 7)
|
2013-09-29 |
heinrichsweikamp |
english correction
|
2013-09-28 |
heinrichsweikamp |
language updates
|
2013-09-27 |
heinrichsweikamp |
NEW: user-selectable color schemes
|
2013-09-27 |
heinrichsweikamp |
minor german update
|
2013-09-23 |
heinrichsweikamp |
Time and Date in normal (Not tiny) font
|
2013-09-04 |
heinrichsweikamp |
1.02 beta start
|
2013-09-04 |
heinrichsweikamp |
Bugfix: deco gas init in OC planner
|
2013-08-28 |
heinrichsweikamp |
1.01 beta start
|
2013-08-28 |
heinrichsweikamp |
BUGFIX: Percent display with 1,5V batteries
|
2013-08-16 |
heinrichsweikamp |
.99 release
|
2013-08-15 |
mh |
minor
|
2013-08-15 |
mh |
Surface customview with important deco settings
|
2013-08-15 |
mh |
Bugfix: Simulator in CC mode
|
2013-08-15 |
mh |
remember last customview in dive and surface mode
|
2013-08-15 |
mh |
Show total divetime in apnea mode
|
2013-08-15 |
mh |
use four additional data points for the battery monitor
|
2013-08-04 |
heinrichsweikamp |
changelog
|
2013-08-04 |
heinrichsweikamp |
change apnea timeout, do no longer store apnea dives in logbook
|
2013-08-04 |
heinrichsweikamp |
small cleanup
|
2013-08-04 |
heinrichsweikamp |
Bugfix: NOAA tables for CNS are in ATA, not bar
|
2013-07-22 |
heinrichsweikamp |
GF high lowest setting 60%
|
2013-07-21 |
heinrichsweikamp |
BUGFIX: alternating brightness at very low ambient light
|
2013-07-21 |
heinrichsweikamp |
minor
|
2013-07-20 |
heinrichsweikamp |
adding cardinal (and ordinal) directions for the compass
|
2013-07-20 |
heinrichsweikamp |
rx isr
|
2013-07-17 |
heinrichsweikamp |
logo update
|
2013-07-09 |
heinrichsweikamp |
0.97 release
|
2013-07-09 |
heinrichsweikamp |
fix imperial units in logbook
|
2013-07-08 |
heinrichsweikamp |
save logbook recording interval
|
2013-07-08 |
heinrichsweikamp |
new option to switch samplingrate between 10s and 2s
|
2013-07-08 |
heinrichsweikamp |
change gf_low default to 30%
|
2013-07-04 |
heinrichsweikamp |
Reset options to default if they are not within the allowed min/max values
|
2013-07-03 |
heinrichsweikamp |
minor cleanup
|
2013-07-03 |
heinrichsweikamp |
changelog
|
2013-07-03 |
heinrichsweikamp |
add new opt_compass_gain option to work with more magnetic battery types
|
2013-06-24 |
heinrichsweikamp |
0.96 release
|
2013-06-16 |
heinrichsweikamp |
calm compass reading for minor heading changes
|
2013-06-12 |
heinrichsweikamp |
reduce eco low brightness threshold (for cave diving)
|
2013-06-11 |
heinrichsweikamp |
Show "MOD:" instead of "EAD:" in gas setup
|
2013-05-30 |
heinrichsweikamp |
fix negative temperature display in surfacemode
|
2013-05-26 |
heinrichsweikamp |
logo update
|
2013-05-26 |
heinrichsweikamp |
Show Max. Depth with 0.1m precision
|
2013-05-16 |
heinrichsweikamp |
sensor status on power-on reset
|
2013-05-15 |
heinrichsweikamp |
Timeout in decoplanner result page
|
2013-05-14 |
heinrichsweikamp |
italian update
|
2013-05-14 |
heinrichsweikamp |
fix custom text <60 chars
|
2013-05-10 |
heinrichsweikamp |
bugfix: dive length in normal header
|
2013-05-10 |
heinrichsweikamp |
Put logbook offset into dive header
|
2013-05-10 |
heinrichsweikamp |
add changelog
|
2013-05-06 |
heinrichsweikamp |
interface description added
|
2013-05-05 |
heinrichsweikamp |
battery warning levels, max. brightnes setting
|
2013-04-24 |
heinrichsweikamp |
init2
|
2013-04-24 |
heinrichsweikamp |
init
|