2017-03-30 |
heinrichsweikamp |
2.15 rc
|
2017-03-30 |
heinrichsweikamp |
minor new sleepmode fix
|
2017-03-29 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
2017-03-27 |
heinrichsweikamp |
docu (battery info byte)
|
2017-03-27 |
heinrichsweikamp |
docu update
|
2017-03-13 |
heinrichsweikamp |
minor
|
2017-02-20 |
heinrichsweikamp |
2.15 start...
|
2017-02-20 |
heinrichsweikamp |
3.14 BETA release
|
2017-02-20 |
heinrichsweikamp |
minor
|
2017-02-20 |
heinrichsweikamp |
Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
|
2017-02-07 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
2017-02-06 |
heinrichsweikamp |
cleanup pscr menu
|
2017-02-06 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
2017-02-01 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
2017-01-17 |
heinrichsweikamp |
2.12 release
|
2017-01-16 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
2017-01-16 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|
2017-01-13 |
heinrichsweikamp |
2.12 release candidate...
|
2017-01-04 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
2016-12-20 |
heinrichsweikamp |
minor
|
2016-12-18 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
2016-12-11 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
2016-12-06 |
heinrichsweikamp |
minor: clear screen while resetting settings
|
2016-11-28 |
heinrichsweikamp |
minor
|
2016-11-25 |
heinrichsweikamp |
minor
|
2016-11-20 |
heinrichsweikamp |
battery gauge handling
|
2016-11-19 |
heinrichsweikamp |
battery gauge handling
|
2016-11-18 |
heinrichsweikamp |
BUGFIX: Minor layout corrections in imperial units dive screen
|
2016-11-02 |
heinrichsweikamp |
CHANGE: Easier to understand "New Battery" menu (OSTC model dependent)
|
2016-10-31 |
heinrichsweikamp |
minor cleanups
|
2016-10-28 |
heinrichsweikamp |
CHANGE: Indicate "Bailout" for bailout deco plan in internal deco planer
|
2016-10-10 |
heinrichsweikamp |
repeated init (For screen 2 issues)
|
2016-10-10 |
heinrichsweikamp |
French/Italian release
|
2016-10-10 |
heinrichsweikamp |
2.10 release
|
2016-09-28 |
heinrichsweikamp |
show language version in information menu
|
2016-09-28 |
heinrichsweikamp |
recover old battery status prior 2.09
|
2016-09-27 |
heinrichsweikamp |
2.1 stable work...
|
2016-09-27 |
heinrichsweikamp |
NEW: Store more battery info into logbook memory
|
2016-09-27 |
heinrichsweikamp |
minor: fix some alignments for OSTC cR
|
2016-09-19 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
2016-09-01 |
heinrichsweikamp |
changelog
|
2016-09-01 |
heinrichsweikamp |
speedup analog presses
|
2016-08-31 |
heinrichsweikamp |
bugfix "old battery" type
|
2016-08-31 |
heinrichsweikamp |
minor
|
2016-08-30 |
heinrichsweikamp |
work on new battery options
|
2016-08-29 |
heinrichsweikamp |
minor
|
2016-08-19 |
heinrichsweikamp |
minor
|
2016-08-18 |
heinrichsweikamp |
minor: Default timeout is 5min
|
2016-08-17 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
2016-07-26 |
heinrichsweikamp |
minor
|
2016-07-26 |
heinrichsweikamp |
doc update
|
2016-07-26 |
heinrichsweikamp |
+BUGFIX: Compatibility with "hwOS Config" fixed
|
2016-07-13 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
2016-07-12 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
2016-07-06 |
heinrichsweikamp |
2.09 beta start
|
2016-06-30 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
2016-06-24 |
heinrichsweikamp |
no screen reboot after logbook exit
|
2016-06-23 |
heinrichsweikamp |
Logbook marker temporally disabled in internal logbook
|
2016-06-22 |
heinrichsweikamp |
hunting a bug in the logbook (Day 3)
|
2016-06-22 |
heinrichsweikamp |
minor
|
2016-06-22 |
heinrichsweikamp |
hunting a bug in the logbook (Day 2)
|
2016-06-21 |
heinrichsweikamp |
hunting a bug in the logbook...
|
2016-06-21 |
heinrichsweikamp |
minor
|
2016-06-16 |
heinrichsweikamp |
hardware_flag handling
|
2016-06-15 |
heinrichsweikamp |
some cleanup
|
2016-06-14 |
heinrichsweikamp |
add code for new compass chip
|
2016-06-10 |
heinrichsweikamp |
docu update
|
2016-05-13 |
heinrichsweikamp |
minor
|
2016-05-12 |
heinrichsweikamp |
ignore 0x47 for standard hwOS
|
2016-05-02 |
heinrichsweikamp |
_another_ timing fix for firmware updates (2.07 was not published yet anyway)
|
2016-04-29 |
heinrichsweikamp |
2.07 release
|
2016-04-29 |
heinrichsweikamp |
fix Page-Program timing
|
2016-04-29 |
heinrichsweikamp |
fix handling for new flash memory chip
|
2016-04-25 |
heinrichsweikamp |
CHANGE: Remove ppO2 [Dil] from OC dive mode screen
|
2016-04-19 |
heinrichsweikamp |
some cleanup
|
2016-04-18 |
heinrichsweikamp |
minor
|
2016-04-18 |
heinrichsweikamp |
NEW: Support for new logbook memory chip (minor hardware change)
|
2016-04-10 |
heinrichsweikamp |
minor
|
2016-03-29 |
heinrichsweikamp |
support for new flash memory
|
2016-03-22 |
heinrichsweikamp |
NEW: New Customview shows ppO2(O2) and ppO2(Diluent) during CCR mode
|
2016-03-15 |
heinrichsweikamp |
2.04beta start
|
2016-03-11 |
heinrichsweikamp |
BUGFIX: Fix missing ccr setup menu (From 2.02)
|
2016-03-08 |
heinrichsweikamp |
BUGFIX: Fix rare issue after battery change (OSTC3 did not start properly)
|
2016-02-24 |
heinrichsweikamp |
minor docu update
|
2016-02-02 |
heinrichsweikamp |
2.01 release
|
2016-02-02 |
heinrichsweikamp |
changelog
|
2016-02-02 |
heinrichsweikamp |
Minor language updates
|
2016-02-01 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
2016-01-11 |
heinrichsweikamp |
2.00 release
|
2016-01-10 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
2016-01-10 |
heinrichsweikamp |
NEW: Logbook shows markers with small orange boxes in the profile
|
2016-01-09 |
heinrichsweikamp |
Logbook marker can be set in dive mode menu (OC only)
|
2015-12-10 |
heinrichsweikamp |
1.94beta release
|
2015-11-24 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
2015-11-23 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
2015-11-23 |
heinrichsweikamp |
some documentation added
|
2015-11-23 |
heinrichsweikamp |
place total dives backup counter in eeprom 16:17
|
2015-11-16 |
heinrichsweikamp |
1.93 release
|
2015-11-06 |
heinrichsweikamp |
BUGFIX: minor text allignment in CCR mode
|
2015-11-05 |
heinrichsweikamp |
tweak response timing in comm mode
|
2015-11-03 |
heinrichsweikamp |
NEW: Show actual dive count in logbook list view (If <1000)
|
2015-11-02 |
heinrichsweikamp |
add profile version to compact headers
|
2015-10-28 |
heinrichsweikamp |
Fix text alignment for French version
|
2015-10-27 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
2015-10-19 |
heinrichsweikamp |
BUGFIX: German texts in ppo2 menu were too long for screen resulting in resulting in text display issues
|
2015-10-09 |
heinrichsweikamp |
1.90 release
|
2015-10-07 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
2015-10-07 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
2015-10-06 |
heinrichsweikamp |
minor language update (german)
|
2015-09-30 |
heinrichsweikamp |
language updates
|
2015-09-23 |
heinrichsweikamp |
allow compass bearing on surface
|
2015-09-19 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
2015-09-15 |
heinrichsweikamp |
Merge
|
2015-09-11 |
heinrichsweikamp |
minor
|
2015-09-15 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
2015-09-10 |
heinrichsweikamp |
set char_I_current_gas for gas6 use
|
2015-09-07 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
2015-08-27 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
2015-08-25 |
heinrichsweikamp |
docu update
|
2015-08-21 |
heinrichsweikamp |
1.87 release
|