Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
Sat, 05 Aug 2017 15:04:08 +0200 |
heinrichsweikamp |
BUGFIX: Do not show GF in divemode for non-GF deco mode
|
Sat, 05 Aug 2017 10:58:40 +0200 |
heinrichsweikamp |
menu work
|
Fri, 04 Aug 2017 19:20:58 +0200 |
heinrichsweikamp |
BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
|
Fri, 04 Aug 2017 16:19:50 +0200 |
heinrichsweikamp |
BUGFIX: Impossible fixed-ppO2 (e.g. 1,6bar in 3m) used for tissue calculations
|
Fri, 04 Aug 2017 16:01:28 +0200 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
Fri, 04 Aug 2017 13:41:29 +0200 |
heinrichsweikamp |
Excel sheets for debugging nofly time from Ralph Lembcke
|
Thu, 03 Aug 2017 17:22:16 +0200 |
heinrichsweikamp |
minor
|
Thu, 03 Aug 2017 17:17:25 +0200 |
heinrichsweikamp |
BUGFIX: Do not check ppO2 for disabled gases
|
Thu, 03 Aug 2017 17:03:05 +0200 |
heinrichsweikamp |
CHANGE: Show actual GF (Not relative) in custom views in dive mode
|
Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
Thu, 03 Aug 2017 16:31:16 +0200 |
heinrichsweikamp |
docu update
|
Sat, 15 Jul 2017 10:38:35 +0200 |
heinrichsweikamp |
hex build
|
Tue, 11 Jul 2017 14:34:56 +0200 |
heinrichsweikamp |
minor
|
Tue, 04 Jul 2017 19:01:32 +0200 |
heinrichsweikamp |
minor
|
Tue, 04 Jul 2017 16:12:53 +0200 |
heinrichsweikamp |
BUGFIX: Lost Diluent now possible in CCR and PSCR mode
|
Fri, 30 Jun 2017 15:12:56 +0200 |
heinrichsweikamp |
BUGFIX: Planner in CCR mode used OC gases for volume calculations in some cases
|
Thu, 29 Jun 2017 11:48:13 +0200 |
heinrichsweikamp |
2.20 RC1
|
Thu, 29 Jun 2017 11:47:08 +0200 |
heinrichsweikamp |
2.18 beta release
|
Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
Mon, 26 Jun 2017 13:02:04 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
Mon, 26 Jun 2017 12:30:54 +0200 |
heinrichsweikamp |
BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
|
Sat, 24 Jun 2017 19:26:06 +0200 |
heinrichsweikamp |
minor
|
Sun, 11 Jun 2017 17:11:40 +0200 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
Fri, 09 Jun 2017 14:47:02 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
|
Mon, 22 May 2017 23:03:21 +0200 |
heinrichsweikamp |
minor
|
Thu, 11 May 2017 15:39:40 +0200 |
heinrichsweikamp |
Battery % in logbook when updated from Sport to Tech
|
Mon, 08 May 2017 12:52:49 +0200 |
heinrichsweikamp |
minor
|
Wed, 19 Apr 2017 12:54:00 +0200 |
heinrichsweikamp |
compass1 full scale gain test
|
Mon, 03 Apr 2017 12:21:03 +0200 |
heinrichsweikamp |
2.15 release
|
Sun, 02 Apr 2017 21:14:01 +0200 |
heinrichsweikamp |
show battery % in logbook (For dives made with 2.15 or newer)
|
Sun, 02 Apr 2017 20:21:10 +0200 |
heinrichsweikamp |
Bugfix: More then one marker shown deleted profile
|
Thu, 30 Mar 2017 15:08:00 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 11:57:54 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 11:28:40 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 10:41:43 +0200 |
heinrichsweikamp |
minor new sleepmode fix
|
Wed, 29 Mar 2017 21:35:12 +0200 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
Mon, 27 Mar 2017 16:06:09 +0200 |
heinrichsweikamp |
docu (battery info byte)
|
Mon, 27 Mar 2017 15:49:00 +0200 |
heinrichsweikamp |
docu update
|
Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
Mon, 20 Feb 2017 15:51:51 +0100 |
heinrichsweikamp |
2.15 start...
|
Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
Mon, 20 Feb 2017 12:00:58 +0100 |
heinrichsweikamp |
minor
|
Mon, 20 Feb 2017 11:56:10 +0100 |
heinrichsweikamp |
Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
|
Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
Mon, 06 Feb 2017 17:24:05 +0100 |
heinrichsweikamp |
cleanup pscr menu
|
Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
Wed, 01 Feb 2017 13:51:59 +0100 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
Tue, 17 Jan 2017 11:57:52 +0100 |
heinrichsweikamp |
2.12 release
|
Mon, 16 Jan 2017 11:59:55 +0100 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
Mon, 16 Jan 2017 11:05:02 +0100 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|
Fri, 13 Jan 2017 13:08:17 +0100 |
heinrichsweikamp |
2.12 release candidate...
|
Wed, 04 Jan 2017 15:04:42 +0100 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
Tue, 20 Dec 2016 16:04:08 +0100 |
heinrichsweikamp |
minor
|
Sun, 18 Dec 2016 18:20:39 +0100 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
Sun, 11 Dec 2016 14:43:56 +0100 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
Tue, 06 Dec 2016 13:47:39 +0100 |
heinrichsweikamp |
minor: clear screen while resetting settings
|
Mon, 28 Nov 2016 15:10:18 +0100 |
heinrichsweikamp |
minor
|
Fri, 25 Nov 2016 14:51:11 +0100 |
heinrichsweikamp |
minor
|
Sun, 20 Nov 2016 12:54:36 +0100 |
heinrichsweikamp |
battery gauge handling
|
Sat, 19 Nov 2016 18:37:47 +0100 |
heinrichsweikamp |
battery gauge handling
|
Fri, 18 Nov 2016 10:49:32 +0100 |
heinrichsweikamp |
BUGFIX: Minor layout corrections in imperial units dive screen
|
Wed, 02 Nov 2016 15:46:22 +0100 |
heinrichsweikamp |
CHANGE: Easier to understand "New Battery" menu (OSTC model dependent)
|
Mon, 31 Oct 2016 15:21:12 +0100 |
heinrichsweikamp |
minor cleanups
|
Fri, 28 Oct 2016 11:30:50 +0200 |
heinrichsweikamp |
CHANGE: Indicate "Bailout" for bailout deco plan in internal deco planer
|
Mon, 10 Oct 2016 19:53:09 +0200 |
heinrichsweikamp |
repeated init (For screen 2 issues)
|
Mon, 10 Oct 2016 14:48:43 +0200 |
heinrichsweikamp |
French/Italian release
|
Mon, 10 Oct 2016 10:59:19 +0200 |
heinrichsweikamp |
2.10 release
|
Wed, 28 Sep 2016 12:04:12 +0200 |
heinrichsweikamp |
show language version in information menu
|
Wed, 28 Sep 2016 11:16:31 +0200 |
heinrichsweikamp |
recover old battery status prior 2.09
|
Tue, 27 Sep 2016 19:13:00 +0200 |
heinrichsweikamp |
2.1 stable work...
|
Tue, 27 Sep 2016 16:40:14 +0200 |
heinrichsweikamp |
NEW: Store more battery info into logbook memory
|
Tue, 27 Sep 2016 16:03:31 +0200 |
heinrichsweikamp |
minor: fix some alignments for OSTC cR
|
Mon, 19 Sep 2016 16:32:02 +0200 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
Thu, 01 Sep 2016 13:28:15 +0200 |
heinrichsweikamp |
changelog
|
Thu, 01 Sep 2016 13:24:17 +0200 |
heinrichsweikamp |
speedup analog presses
|
Wed, 31 Aug 2016 14:48:10 +0200 |
heinrichsweikamp |
bugfix "old battery" type
|
Wed, 31 Aug 2016 14:24:29 +0200 |
heinrichsweikamp |
minor
|
Tue, 30 Aug 2016 17:26:21 +0200 |
heinrichsweikamp |
work on new battery options
|
Mon, 29 Aug 2016 16:26:50 +0200 |
heinrichsweikamp |
minor
|
Fri, 19 Aug 2016 14:29:18 +0200 |
heinrichsweikamp |
minor
|
Thu, 18 Aug 2016 12:41:16 +0200 |
heinrichsweikamp |
minor: Default timeout is 5min
|
Wed, 17 Aug 2016 09:50:37 +0200 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
Tue, 26 Jul 2016 12:25:02 +0200 |
heinrichsweikamp |
minor
|
Tue, 26 Jul 2016 12:15:12 +0200 |
heinrichsweikamp |
doc update
|
Tue, 26 Jul 2016 12:08:29 +0200 |
heinrichsweikamp |
+BUGFIX: Compatibility with "hwOS Config" fixed
|
Wed, 13 Jul 2016 13:06:02 +0200 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
Tue, 12 Jul 2016 12:10:06 +0200 |
heinrichsweikamp |
docu update (hardware descriptor byte)
|
Wed, 06 Jul 2016 14:46:49 +0200 |
heinrichsweikamp |
2.09 beta start
|
Thu, 30 Jun 2016 10:28:12 +0200 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
Fri, 24 Jun 2016 12:51:14 +0200 |
heinrichsweikamp |
no screen reboot after logbook exit
|
Thu, 23 Jun 2016 10:59:42 +0200 |
heinrichsweikamp |
Logbook marker temporally disabled in internal logbook
|
Wed, 22 Jun 2016 21:33:15 +0200 |
heinrichsweikamp |
hunting a bug in the logbook (Day 3)
|
Wed, 22 Jun 2016 12:56:27 +0200 |
heinrichsweikamp |
minor
|
Wed, 22 Jun 2016 12:36:15 +0200 |
heinrichsweikamp |
hunting a bug in the logbook (Day 2)
|
Tue, 21 Jun 2016 17:20:44 +0200 |
heinrichsweikamp |
hunting a bug in the logbook...
|
Tue, 21 Jun 2016 12:44:19 +0200 |
heinrichsweikamp |
minor
|
Thu, 16 Jun 2016 13:21:46 +0200 |
heinrichsweikamp |
hardware_flag handling
|
Wed, 15 Jun 2016 12:26:48 +0200 |
heinrichsweikamp |
some cleanup
|
Tue, 14 Jun 2016 13:02:17 +0200 |
heinrichsweikamp |
add code for new compass chip
|
Fri, 10 Jun 2016 10:01:42 +0200 |
heinrichsweikamp |
docu update
|
Fri, 13 May 2016 16:01:49 +0200 |
heinrichsweikamp |
minor
|
Thu, 12 May 2016 14:58:32 +0200 |
heinrichsweikamp |
ignore 0x47 for standard hwOS
|
Mon, 02 May 2016 12:41:20 +0200 |
heinrichsweikamp |
_another_ timing fix for firmware updates (2.07 was not published yet anyway)
|
Fri, 29 Apr 2016 16:51:44 +0200 |
heinrichsweikamp |
2.07 release
|
Fri, 29 Apr 2016 16:40:10 +0200 |
heinrichsweikamp |
fix Page-Program timing
|
Fri, 29 Apr 2016 15:38:57 +0200 |
heinrichsweikamp |
fix handling for new flash memory chip
|
Mon, 25 Apr 2016 15:25:32 +0200 |
heinrichsweikamp |
CHANGE: Remove ppO2 [Dil] from OC dive mode screen
|
Tue, 19 Apr 2016 14:03:24 +0200 |
heinrichsweikamp |
some cleanup
|
Mon, 18 Apr 2016 17:29:19 +0200 |
heinrichsweikamp |
minor
|
Mon, 18 Apr 2016 14:34:57 +0200 |
heinrichsweikamp |
NEW: Support for new logbook memory chip (minor hardware change)
|
Sun, 10 Apr 2016 11:46:55 +0200 |
heinrichsweikamp |
minor
|
Tue, 29 Mar 2016 12:35:47 +0200 |
heinrichsweikamp |
support for new flash memory
|
Tue, 22 Mar 2016 16:39:00 +0100 |
heinrichsweikamp |
NEW: New Customview shows ppO2(O2) and ppO2(Diluent) during CCR mode
|
Tue, 15 Mar 2016 12:19:12 +0100 |
heinrichsweikamp |
2.04beta start
|
Fri, 11 Mar 2016 10:11:07 +0100 |
heinrichsweikamp |
BUGFIX: Fix missing ccr setup menu (From 2.02)
|
Tue, 08 Mar 2016 11:42:58 +0100 |
heinrichsweikamp |
BUGFIX: Fix rare issue after battery change (OSTC3 did not start properly)
|
Wed, 24 Feb 2016 09:57:08 +0100 |
heinrichsweikamp |
minor docu update
|
Tue, 02 Feb 2016 11:09:14 +0100 |
heinrichsweikamp |
2.01 release
|
Tue, 02 Feb 2016 10:40:52 +0100 |
heinrichsweikamp |
changelog
|
Tue, 02 Feb 2016 10:36:54 +0100 |
heinrichsweikamp |
Minor language updates
|
Mon, 01 Feb 2016 20:44:01 +0100 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
Mon, 11 Jan 2016 15:32:08 +0100 |
heinrichsweikamp |
2.00 release
|
Sun, 10 Jan 2016 11:24:33 +0100 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
Sun, 10 Jan 2016 09:36:47 +0100 |
heinrichsweikamp |
NEW: Logbook shows markers with small orange boxes in the profile
|
Sat, 09 Jan 2016 11:42:01 +0100 |
heinrichsweikamp |
Logbook marker can be set in dive mode menu (OC only)
|
Thu, 10 Dec 2015 13:36:47 +0100 |
heinrichsweikamp |
1.94beta release
|
Tue, 24 Nov 2015 16:22:52 +0100 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
Mon, 23 Nov 2015 16:13:25 +0100 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
Mon, 23 Nov 2015 13:29:41 +0100 |
heinrichsweikamp |
some documentation added
|
Mon, 23 Nov 2015 12:16:38 +0100 |
heinrichsweikamp |
place total dives backup counter in eeprom 16:17
|
Mon, 16 Nov 2015 11:04:27 +0100 |
heinrichsweikamp |
1.93 release
|
Fri, 06 Nov 2015 11:48:40 +0100 |
heinrichsweikamp |
BUGFIX: minor text allignment in CCR mode
|
Thu, 05 Nov 2015 20:15:52 +0100 |
heinrichsweikamp |
tweak response timing in comm mode
|
Tue, 03 Nov 2015 11:35:29 +0100 |
heinrichsweikamp |
NEW: Show actual dive count in logbook list view (If <1000)
|
Mon, 02 Nov 2015 17:48:20 +0100 |
heinrichsweikamp |
add profile version to compact headers
|
Wed, 28 Oct 2015 10:40:56 +0100 |
heinrichsweikamp |
Fix text alignment for French version
|
Tue, 27 Oct 2015 13:45:10 +0100 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
Mon, 19 Oct 2015 15:06:59 +0200 |
heinrichsweikamp |
BUGFIX: German texts in ppo2 menu were too long for screen resulting in resulting in text display issues
|
Fri, 09 Oct 2015 12:57:42 +0200 |
heinrichsweikamp |
1.90 release
|
Wed, 07 Oct 2015 14:46:39 +0200 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
Wed, 07 Oct 2015 13:14:09 +0200 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
Tue, 06 Oct 2015 12:55:01 +0200 |
heinrichsweikamp |
minor language update (german)
|
Wed, 30 Sep 2015 15:38:28 +0200 |
heinrichsweikamp |
language updates
|
Wed, 23 Sep 2015 17:35:19 +0200 |
heinrichsweikamp |
allow compass bearing on surface
|
Sat, 19 Sep 2015 13:41:40 +0200 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
Tue, 15 Sep 2015 18:11:35 +0200 |
heinrichsweikamp |
Merge
|
Fri, 11 Sep 2015 19:37:28 +0200 |
heinrichsweikamp |
minor
|
Tue, 15 Sep 2015 18:11:08 +0200 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
Thu, 10 Sep 2015 13:05:26 +0200 |
heinrichsweikamp |
set char_I_current_gas for gas6 use
|
Mon, 07 Sep 2015 13:58:23 +0200 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
Thu, 27 Aug 2015 17:05:13 +0200 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
Tue, 25 Aug 2015 14:22:55 +0200 |
heinrichsweikamp |
docu update
|
Fri, 21 Aug 2015 18:37:52 +0200 |
heinrichsweikamp |
1.87 release
|
Wed, 19 Aug 2015 18:40:01 +0200 |
heinrichsweikamp |
logbook work
|
Wed, 19 Aug 2015 16:27:00 +0200 |
heinrichsweikamp |
fix some display issues with display1
|
Tue, 18 Aug 2015 22:02:55 +0200 |
heinrichsweikamp |
debugging the compass screen
|
Tue, 18 Aug 2015 17:39:07 +0200 |
heinrichsweikamp |
fixing some layout issues
|
Sun, 16 Aug 2015 15:16:23 +0200 |
heinrichsweikamp |
Additional temperature calibration via PC interface
|
Sat, 15 Aug 2015 12:08:51 +0200 |
heinrichsweikamp |
jump to 1.87
|
Sat, 15 Aug 2015 09:25:17 +0200 |
heinrichsweikamp |
tft timings
|
Wed, 12 Aug 2015 17:41:06 +0200 |
heinrichsweikamp |
minor
|
Wed, 05 Aug 2015 12:28:13 +0200 |
heinrichsweikamp |
french update
|
Tue, 04 Aug 2015 16:37:19 +0200 |
heinrichsweikamp |
cleanup
|
Tue, 04 Aug 2015 11:20:34 +0200 |
heinrichsweikamp |
changelog
|
Tue, 04 Aug 2015 11:09:35 +0200 |
heinrichsweikamp |
1.85beta release
|
Mon, 03 Aug 2015 22:47:39 +0200 |
heinrichsweikamp |
hardware support
|
Mon, 03 Aug 2015 17:27:05 +0200 |
heinrichsweikamp |
make AUTO SP available on OSTC2 hardware
|
Mon, 03 Aug 2015 12:18:18 +0200 |
heinrichsweikamp |
french update
|
Sun, 02 Aug 2015 16:52:31 +0200 |
heinrichsweikamp |
BUGFIX: Auto-Brightness clipped to lowest settings in bright sunlight on some devices
|
Sun, 02 Aug 2015 09:52:28 +0200 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
Fri, 31 Jul 2015 17:44:03 +0200 |
heinrichsweikamp |
hud v3 support
|
Wed, 29 Jul 2015 20:39:35 +0200 |
heinrichsweikamp |
some cleanups
|
Tue, 28 Jul 2015 16:32:55 +0200 |
heinrichsweikamp |
NEW: Quit Simulator automatically when starting a real dive
|
Tue, 28 Jul 2015 13:23:09 +0200 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
Fri, 24 Jul 2015 14:52:39 +0200 |
jdg |
BUGFIX gas volume: do not forget deco gas with switch >= dive's bottom depth.
|
Thu, 23 Jul 2015 12:53:35 +0200 |
heinrichsweikamp |
some cleanups
|
Thu, 23 Jul 2015 10:09:21 +0200 |
heinrichsweikamp |
docu update
|
Wed, 15 Jul 2015 17:57:37 +0200 |
jDG |
[FIX] GasVolume: missing gas changes w/o stops.
|
Wed, 22 Jul 2015 10:42:15 +0200 |
heinrichsweikamp |
Changed content for new 0x6F command (Get compact headers)
|
Tue, 21 Jul 2015 12:08:01 +0200 |
heinrichsweikamp |
New option to download "Compact Headers". Improved BLE support (OSTC 2 and OSTC 3+), updated OSTC interface documentation
|
Mon, 20 Jul 2015 19:07:28 +0200 |
heinrichsweikamp |
re-arrange settings menu
|
Mon, 20 Jul 2015 15:04:13 +0200 |
heinrichsweikamp |
CHANGE: GF and aGF high range increased to 45-110%
|
Mon, 20 Jul 2015 12:43:42 +0200 |
heinrichsweikamp |
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
|
Wed, 15 Jul 2015 15:39:35 +0200 |
jDG |
Fix low_depth shall be stored as a float (no rounding).
|
Mon, 06 Jul 2015 12:50:49 +0200 |
heinrichsweikamp |
Show ppo2 <1bar with leading zero
|
Fri, 03 Jul 2015 15:46:56 +0200 |
heinrichsweikamp |
changelog
|
Fri, 03 Jul 2015 15:08:15 +0200 |
heinrichsweikamp |
minor: fix calc_deko_divemode_sensor
|
Fri, 03 Jul 2015 14:47:04 +0200 |
heinrichsweikamp |
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
|
Sun, 28 Jun 2015 13:58:00 +0200 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
Sun, 28 Jun 2015 05:05:46 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Sun, 28 Jun 2015 05:02:45 +0200 |
janos_kovacs |
Always show ppO2 (warning position, standard color) option
new_screen_layout
|
Sun, 28 Jun 2015 03:55:08 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Fix positions if no VSI Bar displayed
new_screen_layout
|
Fri, 26 Jun 2015 15:03:47 +0200 |
Janos Kovacs |
Merged new_screen_layout into default
|
Wed, 24 Jun 2015 22:19:32 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sun, 21 Jun 2015 12:12:12 +0200 |
heinrichsweikamp |
change button sensitivity range and default
|
Sun, 14 Jun 2015 11:06:20 +0200 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
Sun, 14 Jun 2015 00:16:00 +0200 |
janos_kovacs |
Small fix for the custom grid layout
new_screen_layout
|
Sat, 13 Jun 2015 22:53:05 +0200 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
Sat, 13 Jun 2015 22:54:37 +0200 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Sat, 13 Jun 2015 02:28:37 +0200 |
jdg |
FIX NDL prediction error with Buhlmann model: might be desaturating too fast.
|
Fri, 12 Jun 2015 22:18:21 +0200 |
jDG |
FIX minor assert: separate diluant list means current gas can go up to 10.
|
Fri, 12 Jun 2015 22:15:57 +0200 |
jDG |
FIX 16bits CNS feedback: assert CNS up to 999%
|
Thu, 11 Jun 2015 17:02:09 +0100 |
janos_kovacs |
VSIbar #3f: roll back debug color
new_screen_layout
|
Thu, 11 Jun 2015 16:07:29 +0100 |
janos_kovacs |
VSIbar #3e: additional filter on zero ascend rate
new_screen_layout
|
Thu, 11 Jun 2015 16:44:32 +0200 |
heinrichsweikamp |
move flag13 into bank common
new_screen_layout
|
Thu, 11 Jun 2015 15:16:42 +0100 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
Thu, 11 Jun 2015 13:40:14 +0100 |
janos_kovacs |
VSIbar #3c: extra steps to keep calculation clear
new_screen_layout
|
Wed, 10 Jun 2015 22:47:38 +0100 |
janos_kovacs |
VSIbar #3b: small fix on the bar's width
new_screen_layout
|
Wed, 10 Jun 2015 22:32:38 +0100 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
Wed, 10 Jun 2015 22:24:27 +0100 |
Janos Kovacs |
Merged default into new_screen_layout
new_screen_layout
|
Wed, 10 Jun 2015 16:03:21 +0200 |
jDG |
FIX minor comment about deco offset unit...
|
Tue, 09 Jun 2015 10:47:12 +0200 |
heinrichsweikamp |
Config table for alternative display
|
Tue, 09 Jun 2015 02:15:01 +0200 |
jdg |
FIX missing extern .C definition.
|
Mon, 08 Jun 2015 01:36:05 +0200 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
Sun, 07 Jun 2015 22:07:55 +0200 |
janos_kovacs |
VSIbar #1: layout position changes
new_screen_layout
|
Fri, 05 Jun 2015 13:37:13 +0200 |
Janos Kovacs |
VSI text v2 merged from new_screen_layout into default
|
Tue, 02 Jun 2015 23:38:21 +0100 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
Tue, 02 Jun 2015 17:34:19 +0100 |
Janos Kovacs |
Merge default back to the new_screen_layout development branch
new_screen_layout
|
Tue, 02 Jun 2015 16:34:02 +0200 |
heinrichsweikamp |
rename tMODwarning
|
Mon, 01 Jun 2015 17:19:37 +0200 |
heinrichsweikamp |
Merge with new_screen_layout
|
Mon, 01 Jun 2015 15:21:25 +0200 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
Mon, 01 Jun 2015 11:50:34 +0200 |
heinrichsweikamp |
default branch
|
Mon, 01 Jun 2015 11:48:05 +0200 |
heinrichsweikamp |
New screen layout test
new_screen_layout
|
Sun, 31 May 2015 21:24:16 +0200 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
Sun, 31 May 2015 20:25:12 +0200 |
heinrichsweikamp |
Make char_I_bottom_usage and char_I_deco_usage configurable from PC
|
Sun, 31 May 2015 16:19:56 +0200 |
heinrichsweikamp |
new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
|
Sun, 31 May 2015 10:42:47 +0200 |
heinrichsweikamp |
German tGasUsage
|
Sun, 31 May 2015 02:47:50 +0200 |
jDG |
Slight more efficient bail deco, Test with 2 bail tanks.
|
Sun, 31 May 2015 02:14:09 +0200 |
jDG |
NEW CCR decoplan: 2nd pass to display bailout stops and gas volumes
|
Sat, 30 May 2015 22:58:00 +0200 |
jDG |
FIX clear before displaying gas volumes.
|
Sat, 30 May 2015 22:43:53 +0200 |
jDG |
FIX tests to use plans copyed from actual OSTC3 1.82 computer.
|
Sat, 30 May 2015 21:34:01 +0200 |
jDG |
ADD (back) Gas Volumes display after decoplanning.
|
Sat, 30 May 2015 21:33:04 +0200 |
jDG |
ADD tGasUsage, with FR translation (and DE,IT defaults)
|
Fri, 29 May 2015 02:50:12 +0200 |
jdg |
NEW gas_volume unit test in CCR mode. Works too.
|
Fri, 29 May 2015 02:46:44 +0200 |
jdg |
[mq]: 2015-05-29_02-40-44_r288+.diff
|
Fri, 29 May 2015 02:40:43 +0200 |
jdg |
FIX gas_volume shall read gas switches from char_O_deco_gas
|
Fri, 29 May 2015 02:24:03 +0200 |
jdg |
FIX gas_volumes: shall take stops in forward order.
|
Fri, 29 May 2015 02:07:28 +0200 |
jdg |
NEW test w/o stops and with stops
|
Fri, 29 May 2015 01:25:45 +0200 |
jdg |
NEW unit tests for gas volumes...
|
Thu, 28 May 2015 09:56:15 +0200 |
heinrichsweikamp |
preperations to compute gas consumtion in simulator
|
Wed, 27 May 2015 10:57:29 +0200 |
heinrichsweikamp |
1.82beta with new compass calib code
|
Fri, 22 May 2015 14:50:40 +0200 |
jDG |
Make a more compact COMPASS calibration code (<7KB), and add more tests.
|
Tue, 26 May 2015 17:40:13 +0200 |
heinrichsweikamp |
BUGFIX: Fix download issue for dives made with 1.80 firmware
|
Tue, 26 May 2015 13:24:26 +0200 |
heinrichsweikamp |
doku update
|
Tue, 26 May 2015 12:38:17 +0200 |
heinrichsweikamp |
bugfix wrong profile length in header
|
Mon, 18 May 2015 21:25:56 +0200 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
Mon, 18 May 2015 14:24:50 +0200 |
heinrichsweikamp |
1.79beta - update internal sensor registers during boot
|
Tue, 12 May 2015 14:24:46 +0200 |
heinrichsweikamp |
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
|
Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
Tue, 05 May 2015 14:58:16 +0200 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
Mon, 04 May 2015 12:56:07 +0200 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
Wed, 29 Apr 2015 16:54:58 +0200 |
heinrichsweikamp |
1.78 release
|
Tue, 28 Apr 2015 16:39:28 +0200 |
heinrichsweikamp |
Update digital ppO2 data automatically
|
Wed, 22 Apr 2015 16:03:31 +0200 |
heinrichsweikamp |
increase min input voltage from 1,2mV to 1,9mV (cR only)
|
Mon, 20 Apr 2015 11:18:30 +0200 |
heinrichsweikamp |
adjust menu for different hardware versions
|
Sun, 19 Apr 2015 20:41:48 +0200 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
Thu, 16 Apr 2015 11:30:00 +0200 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
Tue, 14 Apr 2015 16:16:14 +0200 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|
Mon, 30 Mar 2015 14:59:07 +0200 |
heinrichsweikamp |
1.76 release
|
Thu, 26 Mar 2015 14:21:42 +0100 |
janos_kovacs |
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.
|
Thu, 26 Mar 2015 13:50:02 +0100 |
heinrichsweikamp |
show unit8 options in menu left-aligned
|
Thu, 26 Mar 2015 11:37:37 +0100 |
heinrichsweikamp |
bugfix dynamic gas list
|
Wed, 25 Mar 2015 18:07:46 +0100 |
heinrichsweikamp |
language update
|
Tue, 24 Mar 2015 19:48:17 +0100 |
heinrichsweikamp |
increase immunity against false Qi data
|
Mon, 23 Mar 2015 19:58:19 +0100 |
heinrichsweikamp |
minor cleanup
|
Mon, 23 Mar 2015 19:41:27 +0100 |
heinrichsweikamp |
patch for bearing issue
|
Mon, 23 Mar 2015 18:40:58 +0100 |
heinrichsweikamp |
minor speed and size improvements for the compass routine
|
Mon, 23 Mar 2015 18:02:40 +0100 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
Mon, 23 Mar 2015 17:07:57 +0100 |
heinrichsweikamp |
add bearing option to compass
|
Fri, 20 Mar 2015 10:16:49 +0100 |
heinrichsweikamp |
preparations to set a course for the compass display
|
Thu, 19 Mar 2015 13:50:06 +0100 |
heinrichsweikamp |
another icon update
|
Thu, 19 Mar 2015 12:28:23 +0100 |
heinrichsweikamp |
change warning sign
|
Wed, 18 Mar 2015 17:39:27 +0100 |
heinrichsweikamp |
some cleanup, temporaly disable dive_warning.inc
|
Wed, 18 Mar 2015 16:42:49 +0100 |
heinrichsweikamp |
Graphical compass from kovacs
|
Tue, 17 Mar 2015 12:16:15 +0100 |
heinrichsweikamp |
ignore sensor for non-sensor hardware
|
Mon, 16 Mar 2015 15:58:51 +0100 |
heinrichsweikamp |
support hardware_flag for all possible hardware combinations
|
Fri, 13 Mar 2015 10:49:43 +0100 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
Thu, 05 Mar 2015 10:36:56 +0100 |
heinrichsweikamp |
minor docu update
|
Wed, 04 Mar 2015 19:01:57 +0100 |
heinrichsweikamp |
use single-byte hardware flag (again)
|
Wed, 04 Mar 2015 16:26:48 +0100 |
heinrichsweikamp |
minor docu update (removed typo)
|
Wed, 04 Mar 2015 16:25:44 +0100 |
heinrichsweikamp |
auto-select correct settings menu
|
Tue, 03 Mar 2015 12:09:24 +0100 |
heinrichsweikamp |
expand hardware_flag to 4 bytes
|
Mon, 02 Mar 2015 17:05:09 +0100 |
heinrichsweikamp |
docu update
|
Mon, 02 Mar 2015 10:54:00 +0100 |
heinrichsweikamp |
auto-select correct ccr menu
|
Sun, 01 Mar 2015 21:10:14 +0100 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
Sun, 01 Mar 2015 13:06:17 +0100 |
heinrichsweikamp |
cleanup
|
Thu, 26 Feb 2015 13:13:23 +0100 |
heinrichsweikamp |
1.75 release
|
Wed, 25 Feb 2015 22:19:30 +0100 |
heinrichsweikamp |
configure hardware_flag byte
|
Wed, 25 Feb 2015 16:49:59 +0100 |
heinrichsweikamp |
under construction: new hardware_flag to configure different hardware versions
|
Wed, 25 Feb 2015 13:57:30 +0100 |
heinrichsweikamp |
Show OSTC2-like active gas boxes in surface mode
|
Wed, 25 Feb 2015 11:51:50 +0100 |
heinrichsweikamp |
show start gas in normal font
|
Sun, 22 Feb 2015 12:14:03 -0400 |
mh |
show start gas in OC mode permanently
|
Sat, 21 Feb 2015 20:05:57 +0100 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
Fri, 20 Feb 2015 00:15:22 +0100 |
mh |
Bugfix: Check for divemode before checking for menu
|
Wed, 18 Feb 2015 23:07:04 +0100 |
mh |
minor cleanup
|
Thu, 05 Feb 2015 14:51:24 +0100 |
heinrichsweikamp |
1.74 release
|
Mon, 02 Feb 2015 17:39:38 +0100 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
Mon, 02 Feb 2015 17:04:43 +0100 |
heinrichsweikamp |
button config (cR)
|
Sun, 01 Feb 2015 18:49:24 +0100 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
Thu, 29 Jan 2015 18:18:15 +0100 |
heinrichsweikamp |
temporally disable "Copy disable flags from digital input" routine
|
Wed, 14 Jan 2015 11:37:19 +0100 |
heinrichsweikamp |
PC config, 1.72 release
|
Tue, 06 Jan 2015 19:24:58 +0100 |
heinrichsweikamp |
check opt_max correctly
|
Mon, 05 Jan 2015 16:13:15 +0100 |
heinrichsweikamp |
minor: configure buttons during splash screen
|
Mon, 05 Jan 2015 14:41:23 +0100 |
heinrichsweikamp |
make button sensitivity configurable (cR hardware)
|
Sun, 04 Jan 2015 21:24:01 +0100 |
heinrichsweikamp |
init new 4kB Page in logbook memory when pointer is not valid.
|
Fri, 19 Dec 2014 17:56:40 +0100 |
heinrichsweikamp |
1.71beta start
|
Wed, 17 Dec 2014 14:46:45 +0100 |
heinrichsweikamp |
1.7 release
|
Mon, 15 Dec 2014 19:50:51 +0100 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
Mon, 15 Dec 2014 12:50:23 +0100 |
heinrichsweikamp |
ignore battery menu for cr
|
Sun, 14 Dec 2014 13:56:05 +0100 |
heinrichsweikamp |
compass changes
|
Sat, 13 Dec 2014 11:18:56 +0100 |
heinrichsweikamp |
layout changes
|
Wed, 10 Dec 2014 09:13:49 +0100 |
heinrichsweikamp |
Merge
|
Wed, 10 Dec 2014 09:13:36 +0100 |
heinrichsweikamp |
minor
|
Sun, 07 Dec 2014 23:04:16 +0100 |
heinrichsweikamp |
do not clear char_O_deco_gas in copy_deco_table
|
Sun, 07 Dec 2014 18:03:05 +0100 |
heinrichsweikamp |
cleanup
|
Sun, 07 Dec 2014 12:47:19 +0100 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
Sat, 06 Dec 2014 21:04:27 +0100 |
heinrichsweikamp |
charge indicator on surface screen
|
Mon, 01 Dec 2014 17:06:53 +0100 |
heinrichsweikamp |
always reboot display in divemode
|
Wed, 26 Nov 2014 14:30:25 +0100 |
heinrichsweikamp |
Preparations for 1.7
|
Sun, 23 Nov 2014 22:33:41 +0100 |
heinrichsweikamp |
minor
|
Fri, 21 Nov 2014 11:51:53 +0100 |
heinrichsweikamp |
1.64 (Fix ambient light for cR)
|
Fri, 21 Nov 2014 11:10:07 +0100 |
heinrichsweikamp |
1.63beta release
|
Thu, 20 Nov 2014 20:32:36 +0100 |
heinrichsweikamp |
lower minimum backlight in eco mode
|
Wed, 12 Nov 2014 19:33:15 +0100 |
heinrichsweikamp |
cleanup
|
Tue, 11 Nov 2014 16:55:39 +0100 |
heinrichsweikamp |
minor
|
Mon, 10 Nov 2014 13:54:20 +0100 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
Thu, 06 Nov 2014 15:28:59 +0100 |
heinrichsweikamp |
cleanup
|
Thu, 06 Nov 2014 12:00:44 +0100 |
heinrichsweikamp |
suppress ghost readings for long, open cables
|
Wed, 05 Nov 2014 14:43:13 +0100 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
Tue, 04 Nov 2014 15:21:32 +0100 |
heinrichsweikamp |
1.62beta start
|
Mon, 03 Nov 2014 17:31:03 +0100 |
heinrichsweikamp |
reset voting logic on sensor switch
|
Mon, 03 Nov 2014 17:25:19 +0100 |
heinrichsweikamp |
voting logic for external monitoring
|
Thu, 30 Oct 2014 17:45:50 +0100 |
heinrichsweikamp |
minor
|
Wed, 29 Oct 2014 15:33:36 +0100 |
heinrichsweikamp |
limit sensor-read ppO2 to 2.55bar
|
Wed, 29 Oct 2014 12:53:01 +0100 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
Mon, 27 Oct 2014 11:28:48 +0100 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
Sat, 25 Oct 2014 15:28:18 +0200 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
Wed, 22 Oct 2014 18:09:01 +0200 |
heinrichsweikamp |
minor
|
Sat, 18 Oct 2014 10:03:28 +0200 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
Fri, 17 Oct 2014 13:31:14 +0200 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
Thu, 16 Oct 2014 13:11:18 +0200 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
Fri, 10 Oct 2014 11:13:54 +0200 |
heinrichsweikamp |
minor cleanup
|
Thu, 09 Oct 2014 11:18:56 +0200 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
Wed, 08 Oct 2014 17:57:37 +0200 |
heinrichsweikamp |
1.60 work...
|
Tue, 07 Oct 2014 14:21:46 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 07 Oct 2014 13:45:21 +0200 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
Tue, 07 Oct 2014 08:42:38 +0200 |
heinrichsweikamp |
Merge
|
Mon, 06 Oct 2014 23:47:08 +0200 |
heinrichsweikamp |
surface pressure copy in simulator
|
Mon, 06 Oct 2014 11:48:23 +0200 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
Sun, 05 Oct 2014 15:36:17 +0200 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
Wed, 01 Oct 2014 10:31:53 +0200 |
heinrichsweikamp |
minor
|
Tue, 30 Sep 2014 19:19:53 +0200 |
heinrichsweikamp |
BUGFIX: Future TTS in sensor mode
|
Tue, 30 Sep 2014 10:43:57 +0200 |
heinrichsweikamp |
1.54 beta start
|
Tue, 30 Sep 2014 10:35:47 +0200 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
Mon, 29 Sep 2014 22:26:47 +0200 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
Mon, 29 Sep 2014 12:03:26 +0200 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
Sun, 28 Sep 2014 22:27:39 +0200 |
heinrichsweikamp |
logbook
|
Sun, 28 Sep 2014 18:44:07 +0200 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
Thu, 11 Sep 2014 15:41:48 +0200 |
heinrichsweikamp |
testing consumption
|
Wed, 10 Sep 2014 16:13:16 +0200 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
Wed, 10 Sep 2014 12:44:56 +0200 |
heinrichsweikamp |
clarify diluent change in the documentation
|
Tue, 09 Sep 2014 21:17:25 +0200 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
Tue, 09 Sep 2014 16:50:29 +0200 |
heinrichsweikamp |
skip fallback warning in OC modes
|
Mon, 08 Sep 2014 15:39:41 +0200 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
Mon, 08 Sep 2014 13:07:22 +0200 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
Thu, 04 Sep 2014 17:40:24 +0200 |
heinrichsweikamp |
nicer boot into surfacemode
|
Fri, 29 Aug 2014 08:58:27 +0200 |
heinrichsweikamp |
make new parameters configurable through pc
|
Thu, 28 Aug 2014 20:36:14 +0200 |
heinrichsweikamp |
minor
|
Thu, 28 Aug 2014 12:13:52 +0200 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
Wed, 27 Aug 2014 17:38:21 +0200 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
Thu, 21 Aug 2014 10:30:52 +0200 |
heinrichsweikamp |
minor
|
Thu, 21 Aug 2014 10:19:03 +0200 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
Mon, 18 Aug 2014 17:37:00 +0200 |
heinrichsweikamp |
work on flip screen...
|
Wed, 13 Aug 2014 17:43:41 +0200 |
heinrichsweikamp |
1.51beta start
|
Mon, 11 Aug 2014 11:32:44 +0200 |
heinrichsweikamp |
1.50 stable release
|
Wed, 06 Aug 2014 17:38:31 +0200 |
heinrichsweikamp |
some cleanup
|
Wed, 06 Aug 2014 11:59:04 +0200 |
heinrichsweikamp |
some cleanup
|
Tue, 05 Aug 2014 17:11:48 +0200 |
heinrichsweikamp |
fallback default = 1
|
Tue, 05 Aug 2014 16:55:09 +0200 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
Mon, 04 Aug 2014 12:10:35 +0200 |
heinrichsweikamp |
1.45 beta release
|
Sun, 03 Aug 2014 10:28:21 +0200 |
heinrichsweikamp |
seperate option table, place in address <0x10000
|
Thu, 31 Jul 2014 16:36:15 +0200 |
mh |
option_read and option_write eeprom banking
|
Thu, 31 Jul 2014 11:40:48 +0200 |
heinrichsweikamp |
New changelog.txt format
|
Fri, 18 Jul 2014 10:29:23 +0200 |
heinrichsweikamp |
1.44 beta release
|
Thu, 17 Jul 2014 17:56:09 +0200 |
heinrichsweikamp |
some cleanup
|
Thu, 17 Jul 2014 14:34:10 +0200 |
heinrichsweikamp |
minor: some extra protection against wrong gas selection
|
Thu, 17 Jul 2014 14:24:51 +0200 |
heinrichsweikamp |
Simplify gas change
|
Thu, 17 Jul 2014 13:29:25 +0200 |
heinrichsweikamp |
rename Deco Planner to Simulator
|
Wed, 16 Jul 2014 14:39:56 +0200 |
heinrichsweikamp |
minor
|
Tue, 15 Jul 2014 10:20:37 +0200 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
Mon, 14 Jul 2014 15:17:07 +0200 |
heinrichsweikamp |
BUGFIX: Surface interval was not displayed correctly in some cases
|
Tue, 08 Jul 2014 11:39:00 +0200 |
heinrichsweikamp |
Bugfix: Start dive mode simulator in correct depth
|
Fri, 04 Jul 2014 12:51:20 +0200 |
heinrichsweikamp |
NEW: Update warnings every second
|
Thu, 03 Jul 2014 19:34:41 +0200 |
heinrichsweikamp |
no safety stop during menu display
|
Thu, 03 Jul 2014 12:08:06 +0200 |
heinrichsweikamp |
minor cleanup
|
Tue, 01 Jul 2014 17:37:02 +0200 |
heinrichsweikamp |
catch timeout during set time/date command
|
Tue, 01 Jul 2014 14:48:17 +0200 |
heinrichsweikamp |
1.41beta release
|
Mon, 30 Jun 2014 10:58:02 +0200 |
heinrichsweikamp |
fix depth<0m display, ceiling
|
Sun, 29 Jun 2014 14:21:23 +0200 |
heinrichsweikamp |
minor
|
Sun, 29 Jun 2014 13:53:46 +0200 |
heinrichsweikamp |
cleanup
|
Sun, 29 Jun 2014 13:40:59 +0200 |
heinrichsweikamp |
add ceiling display
|
Fri, 27 Jun 2014 16:55:49 +0200 |
heinrichsweikamp |
Show %'s for non-GF deco model in surface mode
|
Fri, 27 Jun 2014 16:15:07 +0200 |
heinrichsweikamp |
minor
|
Fri, 27 Jun 2014 15:52:43 +0200 |
heinrichsweikamp |
battery check in sleep
|
Fri, 27 Jun 2014 10:44:06 +0200 |
heinrichsweikamp |
Do not show "GF info" for non-GF modes
|
Fri, 27 Jun 2014 10:18:41 +0200 |
heinrichsweikamp |
show heading with leading zeros
|
Wed, 25 Jun 2014 12:39:14 +0200 |
heinrichsweikamp |
minor
|
Mon, 23 Jun 2014 18:11:49 +0200 |
heinrichsweikamp |
show decomode in logbook and simulator w/o sensor type
|
Mon, 23 Jun 2014 17:55:27 +0200 |
heinrichsweikamp |
FIX: Gas volume computation when using several travel mix.
|
Mon, 23 Jun 2014 17:44:18 +0200 |
heinrichsweikamp |
minor fix: assert should pass for pure helium diluant
|
Mon, 23 Jun 2014 16:14:33 +0200 |
heinrichsweikamp |
Merge
|
Tue, 17 Jun 2014 12:10:33 +0200 |
heinrichsweikamp |
1.40 release
|
Tue, 17 Jun 2014 12:00:20 +0200 |
heinrichsweikamp |
Bugfix: CNS in planner
|
Tue, 10 Jun 2014 10:14:18 +0200 |
heinrichsweikamp |
BUGFIX: OSTC settings via USB issues
|
Thu, 05 Jun 2014 11:53:21 +0200 |
heinrichsweikamp |
Merge
|
Wed, 04 Jun 2014 19:19:18 +0200 |
heinrichsweikamp |
language updates
|
Thu, 05 Jun 2014 11:53:00 +0200 |
heinrichsweikamp |
BUGFIX: wrong ppo2 recording parameter in short header
|
Tue, 03 Jun 2014 13:20:44 +0200 |
heinrichsweikamp |
minor
|
Tue, 03 Jun 2014 13:20:05 +0200 |
heinrichsweikamp |
Show HUD voltages only in CCR mode...
|
Tue, 03 Jun 2014 12:25:47 +0200 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
Mon, 02 Jun 2014 12:54:12 +0200 |
heinrichsweikamp |
Minor language updates
|
Wed, 07 May 2014 14:57:58 +0200 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
Sun, 04 May 2014 21:23:09 +0200 |
heinrichsweikamp |
increase ir-timeout to 4 seconds
|
Fri, 02 May 2014 19:38:14 +0200 |
heinrichsweikamp |
1.30 release
|
Fri, 02 May 2014 14:13:35 +0200 |
heinrichsweikamp |
show event "bailout" in the internal logbook
|
Thu, 01 May 2014 21:16:31 +0200 |
heinrichsweikamp |
add event "bailout" in profile
|
Mon, 28 Apr 2014 16:26:31 +0200 |
heinrichsweikamp |
CHANGE: Always compute bailout plan based on all active gases
|
Mon, 28 Apr 2014 11:33:00 +0200 |
heinrichsweikamp |
auto-reset compass filtering data before calibration
|
Mon, 28 Apr 2014 10:17:18 +0200 |
heinrichsweikamp |
BUGFIX: Show "*" always in front of the initial Setpoint 1
|
Tue, 22 Apr 2014 12:59:14 +0200 |
heinrichsweikamp |
BUGFIX: compass calibration does now timeout automatically after 60s
|
Thu, 17 Apr 2014 10:28:04 +0200 |
heinrichsweikamp |
clear pressure sensor compensation upon update
|
Wed, 16 Apr 2014 22:31:09 +0200 |
heinrichsweikamp |
add sensor calibration option (PC only), some cleanup
|
Tue, 15 Apr 2014 15:08:16 +0200 |
heinrichsweikamp |
minor, always re-init compass in calibration loop
|
Tue, 15 Apr 2014 14:40:49 +0200 |
heinrichsweikamp |
NEW: automatic compass gain makes calibration quicker
|
Tue, 15 Apr 2014 12:16:28 +0200 |
heinrichsweikamp |
BUGFIX: No average depth for end-of-dive portion (<1m)
|
Mon, 14 Apr 2014 15:59:16 +0200 |
heinrichsweikamp |
fix minor display bug (battery percent)
|
Wed, 02 Apr 2014 10:25:24 +0200 |
heinrichsweikamp |
CHANGE: Color schemes improved
|
Wed, 02 Apr 2014 09:55:01 +0200 |
heinrichsweikamp |
CHANGE: No warning sign for selected aGF
|
Mon, 31 Mar 2014 14:16:17 +0200 |
heinrichsweikamp |
No graphical output (yet)
|
Mon, 31 Mar 2014 10:49:55 +0200 |
heinrichsweikamp |
Minor french update
|
Mon, 17 Mar 2014 23:48:30 +0100 |
heinrichsweikamp |
Test with graphic compass
|
Mon, 10 Mar 2014 11:39:31 +0100 |
heinrichsweikamp |
1.23 release
|
Fri, 28 Feb 2014 11:03:18 +0100 |
mh |
add some extra safety checks when settings were altered from the PC software
|
Thu, 27 Feb 2014 14:38:08 +0100 |
mh |
new commands in download mode:
|
Thu, 27 Feb 2014 12:56:52 +0100 |
mh |
new command in download mode: "r" - read setting
|
Wed, 26 Feb 2014 11:58:03 +0100 |
mh |
BUGFIX: Reset Logbook did not reset Logbook TOC properly
|
Thu, 20 Feb 2014 10:12:45 +0100 |
heinrichsweikamp |
BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
|
Wed, 19 Feb 2014 14:46:26 +0100 |
heinrichsweikamp |
1.21 release
|
Tue, 11 Feb 2014 13:02:11 +0100 |
heinrichsweikamp |
change log
|
Mon, 10 Feb 2014 16:37:48 +0100 |
heinrichsweikamp |
1.2RC
|
Mon, 10 Feb 2014 16:35:05 +0100 |
heinrichsweikamp |
Merge with ClaudeDive_Translations
|
Tue, 04 Feb 2014 16:39:10 +0100 |
heinrichsweikamp |
another update from claudedive
ClaudeDive_Translations
|
Tue, 04 Feb 2014 13:18:37 +0100 |
heinrichsweikamp |
1.13 beta start
|
Tue, 04 Feb 2014 11:47:18 +0100 |
heinrichsweikamp |
french update
ClaudeDive_Translations
|
Sun, 02 Feb 2014 20:19:53 +0100 |
heinrichsweikamp |
+CHANGE: Some French Translations
|
Sat, 01 Feb 2014 15:31:30 +0100 |
heinrichsweikamp |
BUGFIX: Set Day for months <31 days
|
Sat, 11 Jan 2014 22:36:17 +0100 |
heinrichsweikamp |
second debug mode page
|
Sat, 11 Jan 2014 18:03:04 +0100 |
heinrichsweikamp |
BUGFIX: Maintain last selected customview in surface mode
|
Fri, 10 Jan 2014 10:18:16 +0100 |
heinrichsweikamp |
change log
|
Fri, 10 Jan 2014 10:13:53 +0100 |
heinrichsweikamp |
Merge
|
Thu, 19 Dec 2013 22:12:29 +0100 |
heinrichsweikamp |
allow logbook erase from reset menu
|
Fri, 10 Jan 2014 10:11:43 +0100 |
heinrichsweikamp |
show battery voltage in info menu
|
Wed, 04 Dec 2013 17:17:55 +0100 |
heinrichsweikamp |
1.1 release
|
Tue, 03 Dec 2013 15:10:02 +0100 |
heinrichsweikamp |
BUGFIX: Display Desat.-Time >100 hours
|
Sun, 01 Dec 2013 09:08:31 +0100 |
heinrichsweikamp |
Backlight level in eco mode
|
Wed, 20 Nov 2013 16:10:41 +0100 |
heinrichsweikamp |
startup with 1.6 hardware
|
Wed, 02 Oct 2013 08:32:35 +0200 |
heinrichsweikamp |
minor
|
Wed, 02 Oct 2013 08:27:37 +0200 |
heinrichsweikamp |
another small French update
|
Mon, 30 Sep 2013 01:00:07 +0200 |
heinrichsweikamp |
Change "O2" warning to "ppO2"
|
Sun, 29 Sep 2013 19:10:12 +0200 |
heinrichsweikamp |
some cleanup/changelog
|
Sun, 29 Sep 2013 18:53:22 +0200 |
heinrichsweikamp |
NEW: Dynamic Gaslist in OC mode (Divemode, Customview 7)
|
Sun, 29 Sep 2013 16:33:03 +0200 |
heinrichsweikamp |
english correction
|
Sat, 28 Sep 2013 15:20:39 +0200 |
heinrichsweikamp |
language updates
|
Fri, 27 Sep 2013 23:45:57 +0200 |
heinrichsweikamp |
NEW: user-selectable color schemes
|
Fri, 27 Sep 2013 14:17:21 +0200 |
heinrichsweikamp |
minor german update
|
Mon, 23 Sep 2013 20:47:18 +0200 |
heinrichsweikamp |
Time and Date in normal (Not tiny) font
|
Wed, 04 Sep 2013 12:39:40 +0200 |
heinrichsweikamp |
1.02 beta start
|
Wed, 04 Sep 2013 12:39:17 +0200 |
heinrichsweikamp |
Bugfix: deco gas init in OC planner
|
Wed, 28 Aug 2013 18:48:11 +0200 |
heinrichsweikamp |
1.01 beta start
|
Wed, 28 Aug 2013 15:44:11 +0200 |
heinrichsweikamp |
BUGFIX: Percent display with 1,5V batteries
|
Fri, 16 Aug 2013 09:30:27 +0200 |
heinrichsweikamp |
.99 release
|
Thu, 15 Aug 2013 15:58:48 +0200 |
mh |
minor
|
Thu, 15 Aug 2013 15:37:34 +0200 |
mh |
Surface customview with important deco settings
|
Thu, 15 Aug 2013 14:34:50 +0200 |
mh |
Bugfix: Simulator in CC mode
|
Thu, 15 Aug 2013 13:55:55 +0200 |
mh |
remember last customview in dive and surface mode
|
Thu, 15 Aug 2013 13:30:05 +0200 |
mh |
Show total divetime in apnea mode
|
Thu, 15 Aug 2013 12:39:05 +0200 |
mh |
use four additional data points for the battery monitor
|
Sun, 04 Aug 2013 18:13:18 +0200 |
heinrichsweikamp |
changelog
|
Sun, 04 Aug 2013 18:04:37 +0200 |
heinrichsweikamp |
change apnea timeout, do no longer store apnea dives in logbook
|
Sun, 04 Aug 2013 17:52:44 +0200 |
heinrichsweikamp |
small cleanup
|
Sun, 04 Aug 2013 15:56:46 +0200 |
heinrichsweikamp |
Bugfix: NOAA tables for CNS are in ATA, not bar
|
Mon, 22 Jul 2013 14:26:04 +0200 |
heinrichsweikamp |
GF high lowest setting 60%
|
Sun, 21 Jul 2013 18:04:29 +0200 |
heinrichsweikamp |
BUGFIX: alternating brightness at very low ambient light
|
Sun, 21 Jul 2013 14:11:47 +0200 |
heinrichsweikamp |
minor
|
Sat, 20 Jul 2013 22:01:49 +0200 |
heinrichsweikamp |
adding cardinal (and ordinal) directions for the compass
|
Sat, 20 Jul 2013 16:02:35 +0200 |
heinrichsweikamp |
rx isr
|
Wed, 17 Jul 2013 13:22:51 +0200 |
heinrichsweikamp |
logo update
|
Tue, 09 Jul 2013 12:09:21 +0200 |
heinrichsweikamp |
0.97 release
|
Tue, 09 Jul 2013 11:33:18 +0200 |
heinrichsweikamp |
fix imperial units in logbook
|
Mon, 08 Jul 2013 14:57:13 +0200 |
heinrichsweikamp |
save logbook recording interval
|
Mon, 08 Jul 2013 12:38:16 +0200 |
heinrichsweikamp |
new option to switch samplingrate between 10s and 2s
|
Mon, 08 Jul 2013 11:37:37 +0200 |
heinrichsweikamp |
change gf_low default to 30%
|
Thu, 04 Jul 2013 09:51:33 +0200 |
heinrichsweikamp |
Reset options to default if they are not within the allowed min/max values
|
Wed, 03 Jul 2013 23:19:57 +0200 |
heinrichsweikamp |
minor cleanup
|
Wed, 03 Jul 2013 11:51:46 +0200 |
heinrichsweikamp |
changelog
|
Wed, 03 Jul 2013 11:37:47 +0200 |
heinrichsweikamp |
add new opt_compass_gain option to work with more magnetic battery types
|
Mon, 24 Jun 2013 12:25:01 +0200 |
heinrichsweikamp |
0.96 release
|
Sun, 16 Jun 2013 19:14:16 +0200 |
heinrichsweikamp |
calm compass reading for minor heading changes
|
Wed, 12 Jun 2013 18:15:38 +0200 |
heinrichsweikamp |
reduce eco low brightness threshold (for cave diving)
|
Tue, 11 Jun 2013 09:42:59 +0200 |
heinrichsweikamp |
Show "MOD:" instead of "EAD:" in gas setup
|
Thu, 30 May 2013 19:11:12 +0200 |
heinrichsweikamp |
fix negative temperature display in surfacemode
|
Sun, 26 May 2013 12:06:51 +0200 |
heinrichsweikamp |
logo update
|
Sun, 26 May 2013 10:24:50 +0200 |
heinrichsweikamp |
Show Max. Depth with 0.1m precision
|
Thu, 16 May 2013 14:48:32 +0200 |
heinrichsweikamp |
sensor status on power-on reset
|
Wed, 15 May 2013 11:57:44 +0200 |
heinrichsweikamp |
Timeout in decoplanner result page
|
Tue, 14 May 2013 10:49:46 +0200 |
heinrichsweikamp |
italian update
|
Tue, 14 May 2013 09:24:49 +0200 |
heinrichsweikamp |
fix custom text <60 chars
|
Fri, 10 May 2013 15:56:17 +0200 |
heinrichsweikamp |
bugfix: dive length in normal header
|
Fri, 10 May 2013 15:35:23 +0200 |
heinrichsweikamp |
Put logbook offset into dive header
|
Fri, 10 May 2013 14:33:28 +0200 |
heinrichsweikamp |
add changelog
|
Mon, 06 May 2013 14:21:11 +0200 |
heinrichsweikamp |
interface description added
|
Sun, 05 May 2013 15:37:24 +0200 |
heinrichsweikamp |
battery warning levels, max. brightnes setting
|
Wed, 24 Apr 2013 19:39:39 +0200 |
heinrichsweikamp |
init2
|
Wed, 24 Apr 2013 19:22:45 +0200 |
heinrichsweikamp |
init
|