| Sat, 10 Mar 2018 15:39:33 +0100 |
heinrichsweikamp |
Sync safety stop countdown output
|
| Tue, 27 Feb 2018 12:27:31 +0100 |
heinrichsweikamp |
optical input work
|
| Mon, 26 Feb 2018 16:40:28 +0100 |
heinrichsweikamp |
work on 2.97 stable
|
| Mon, 05 Feb 2018 17:59:55 +0100 |
heinrichsweikamp |
bring digital S8 HUD back to life...
|
| Wed, 31 Jan 2018 19:39:37 +0100 |
heinrichsweikamp |
bump to 2.96beta (REFACTORED VERSION)
|
| Thu, 23 Nov 2017 12:52:36 +0100 |
heinrichsweikamp |
ignore voting logic
|
| Sun, 19 Nov 2017 20:04:16 +0100 |
heinrichsweikamp |
initialize blinking flags properly, apply fixes from 2.92 into 2.27beta
|
| Mon, 25 Sep 2017 19:02:42 +0200 |
heinrichsweikamp |
2.26 stable RC1
|
| Fri, 08 Sep 2017 13:36:04 +0200 |
heinrichsweikamp |
2.25 stable RC2
|
| Wed, 06 Sep 2017 21:26:18 +0200 |
heinrichsweikamp |
BUGFIX: Simulator in CC mode
|
| Wed, 06 Sep 2017 11:08:59 +0200 |
heinrichsweikamp |
BUGFIX: "lost gas" showed current set of gases (Diluents in CC, OC in Bailout) for both "lost gas" menus
|
| Fri, 01 Sep 2017 13:18:38 +0200 |
heinrichsweikamp |
2.23beta release
|
| Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
| Sat, 05 Aug 2017 17:36:58 +0200 |
heinrichsweikamp |
BUGFIX: O2 as diluent in CCR caused wrong calculations (Deco, EAD, END) in less then 6m depth
|
| Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
| Fri, 04 Aug 2017 16:01:28 +0200 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
| Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
| Tue, 11 Jul 2017 14:34:56 +0200 |
heinrichsweikamp |
minor
|
| Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
| Mon, 26 Jun 2017 13:02:04 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
| Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
| Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
| Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
| Tue, 20 Dec 2016 16:04:08 +0100 |
heinrichsweikamp |
minor
|
| Sun, 18 Dec 2016 18:20:39 +0100 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
| Sun, 11 Dec 2016 14:43:56 +0100 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
| Wed, 17 Aug 2016 09:50:37 +0200 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
| Thu, 30 Jun 2016 10:28:12 +0200 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
| Wed, 15 Jun 2016 12:26:48 +0200 |
heinrichsweikamp |
some cleanup
|
| Sun, 10 Jan 2016 11:24:33 +0100 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
| Tue, 24 Nov 2015 16:22:52 +0100 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
| Mon, 23 Nov 2015 16:13:25 +0100 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
| Tue, 27 Oct 2015 13:45:10 +0100 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
| Wed, 07 Oct 2015 14:46:39 +0200 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
| Wed, 07 Oct 2015 13:14:09 +0200 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
| Wed, 23 Sep 2015 17:35:19 +0200 |
heinrichsweikamp |
allow compass bearing on surface
|
| Mon, 07 Sep 2015 13:58:23 +0200 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
| Tue, 28 Jul 2015 13:23:09 +0200 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
| Fri, 03 Jul 2015 15:08:15 +0200 |
heinrichsweikamp |
minor: fix calc_deko_divemode_sensor
|
| Fri, 03 Jul 2015 14:47:04 +0200 |
heinrichsweikamp |
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
|
| Sun, 28 Jun 2015 13:58:00 +0200 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
| Sun, 28 Jun 2015 05:02:45 +0200 |
janos_kovacs |
Always show ppO2 (warning position, standard color) option
new_screen_layout
|
| Thu, 11 Jun 2015 15:16:42 +0100 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
| Wed, 10 Jun 2015 22:32:38 +0100 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
| Mon, 08 Jun 2015 01:36:05 +0200 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
| Tue, 02 Jun 2015 23:38:21 +0100 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
| Mon, 18 May 2015 14:24:50 +0200 |
heinrichsweikamp |
1.79beta - update internal sensor registers during boot
|
| Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
| Tue, 05 May 2015 14:58:16 +0200 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
| Mon, 23 Mar 2015 18:02:40 +0100 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
| Mon, 23 Mar 2015 17:07:57 +0100 |
heinrichsweikamp |
add bearing option to compass
|
| Fri, 20 Mar 2015 10:16:49 +0100 |
heinrichsweikamp |
preparations to set a course for the compass display
|
| Sun, 01 Mar 2015 21:10:14 +0100 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
| Mon, 05 Jan 2015 14:41:23 +0100 |
heinrichsweikamp |
make button sensitivity configurable (cR hardware)
|
| Fri, 19 Dec 2014 17:56:40 +0100 |
heinrichsweikamp |
1.71beta start
|
| Mon, 15 Dec 2014 19:50:51 +0100 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
| Mon, 01 Dec 2014 17:06:53 +0100 |
heinrichsweikamp |
always reboot display in divemode
|
| Wed, 26 Nov 2014 14:30:25 +0100 |
heinrichsweikamp |
Preparations for 1.7
|
| Sun, 23 Nov 2014 22:33:41 +0100 |
heinrichsweikamp |
minor
|
| Thu, 06 Nov 2014 15:28:59 +0100 |
heinrichsweikamp |
cleanup
|
| Wed, 05 Nov 2014 14:43:13 +0100 |
heinrichsweikamp |
allow auto-return from setpoint fallback
|
| Mon, 03 Nov 2014 17:31:03 +0100 |
heinrichsweikamp |
reset voting logic on sensor switch
|
| Mon, 03 Nov 2014 17:25:19 +0100 |
heinrichsweikamp |
voting logic for external monitoring
|
| Tue, 07 Oct 2014 13:45:21 +0200 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
| Mon, 06 Oct 2014 23:47:08 +0200 |
heinrichsweikamp |
surface pressure copy in simulator
|
| Tue, 30 Sep 2014 10:35:47 +0200 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
| Tue, 09 Sep 2014 16:50:29 +0200 |
heinrichsweikamp |
skip fallback warning in OC modes
|
| Mon, 08 Sep 2014 15:39:41 +0200 |
heinrichsweikamp |
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
|
| Thu, 21 Aug 2014 10:19:03 +0200 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
| Wed, 06 Aug 2014 17:38:31 +0200 |
heinrichsweikamp |
some cleanup
|
| Tue, 05 Aug 2014 16:55:09 +0200 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
| Thu, 17 Jul 2014 14:34:10 +0200 |
heinrichsweikamp |
minor: some extra protection against wrong gas selection
|
| Thu, 17 Jul 2014 14:24:51 +0200 |
heinrichsweikamp |
Simplify gas change
|
| Tue, 15 Jul 2014 10:20:37 +0200 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
| Fri, 04 Jul 2014 12:51:20 +0200 |
heinrichsweikamp |
NEW: Update warnings every second
|
| Mon, 23 Jun 2014 16:14:33 +0200 |
heinrichsweikamp |
Merge
|
| Tue, 17 Jun 2014 12:00:20 +0200 |
heinrichsweikamp |
Bugfix: CNS in planner
|
| Tue, 03 Jun 2014 12:25:47 +0200 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
| Wed, 07 May 2014 14:57:58 +0200 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
| Fri, 02 May 2014 14:13:35 +0200 |
heinrichsweikamp |
show event "bailout" in the internal logbook
|
| Thu, 01 May 2014 21:16:31 +0200 |
heinrichsweikamp |
add event "bailout" in profile
|
| Mon, 28 Apr 2014 16:26:31 +0200 |
heinrichsweikamp |
CHANGE: Always compute bailout plan based on all active gases
|
| Tue, 15 Apr 2014 12:16:28 +0200 |
heinrichsweikamp |
BUGFIX: No average depth for end-of-dive portion (<1m)
|
| Wed, 02 Apr 2014 09:55:01 +0200 |
heinrichsweikamp |
CHANGE: No warning sign for selected aGF
|
| Mon, 17 Mar 2014 23:48:30 +0100 |
heinrichsweikamp |
Test with graphic compass
|
| Sun, 02 Feb 2014 20:19:53 +0100 |
heinrichsweikamp |
+CHANGE: Some French Translations
|
| Mon, 30 Sep 2013 01:00:07 +0200 |
heinrichsweikamp |
Change "O2" warning to "ppO2"
|
| Thu, 15 Aug 2013 13:55:55 +0200 |
mh |
remember last customview in dive and surface mode
|
| Thu, 15 Aug 2013 13:30:05 +0200 |
mh |
Show total divetime in apnea mode
|
| Sun, 04 Aug 2013 18:04:37 +0200 |
heinrichsweikamp |
change apnea timeout, do no longer store apnea dives in logbook
|
| Mon, 08 Jul 2013 12:38:16 +0200 |
heinrichsweikamp |
new option to switch samplingrate between 10s and 2s
|
| Wed, 24 Apr 2013 19:22:45 +0200 |
heinrichsweikamp |
init
|
