2018-03-10 |
heinrichsweikamp |
V2.97 SP1
|
2018-02-26 |
heinrichsweikamp |
work on 2.97 stable
|
2018-02-21 |
heinrichsweikamp |
2.97 work...
|
2018-02-21 |
heinrichsweikamp |
Work-Around for 2.97 stable
|
2018-02-18 |
heinrichsweikamp |
work in progress...
|
2018-02-15 |
heinrichsweikamp |
French updates
|
2018-02-13 |
heinrichsweikamp |
docu update
|
2018-02-08 |
heinrichsweikamp |
language updates
|
2018-02-06 |
heinrichsweikamp |
CHANGE: Limit button sensitivity to 80%
|
2018-02-03 |
heinrichsweikamp |
seperate desat and sat multipliers for GF and Non-GF modes. Set to 100/100 as default in GF mode
|
2018-02-03 |
heinrichsweikamp |
Remove routine to fix corrupt dives made with v1.80
|
2018-01-31 |
heinrichsweikamp |
bump to 2.96beta (REFACTORED VERSION)
|
2017-12-27 |
heinrichsweikamp |
docu update
|
2017-12-19 |
heinrichsweikamp |
2.27 release (FR_IT)
|
2017-12-19 |
heinrichsweikamp |
2.27 release (DE_EN)
|
2017-11-23 |
heinrichsweikamp |
ignore voting logic
|
2017-11-19 |
heinrichsweikamp |
BUGFIX: Display of negative (?C) water temperatures
|
2017-09-25 |
heinrichsweikamp |
2.26 stable RC1
|
2017-09-07 |
heinrichsweikamp |
2.25 stable RC
|
2017-09-06 |
heinrichsweikamp |
BUGFIX: Simulator in CC mode
|
2017-09-01 |
heinrichsweikamp |
2.23beta release
|
2017-08-28 |
heinrichsweikamp |
2.23 start
|
2017-08-25 |
heinrichsweikamp |
2.22 internal release
|
2017-08-18 |
heinrichsweikamp |
2.21 start
|
2017-08-04 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
2017-08-03 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
2017-06-29 |
heinrichsweikamp |
2.20 RC1
|
2017-06-27 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
2017-06-26 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
2017-06-11 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
2017-04-19 |
heinrichsweikamp |
compass1 full scale gain test
|
2017-04-03 |
heinrichsweikamp |
2.15 release
|
2017-03-30 |
heinrichsweikamp |
2.15 rc
|
2017-03-29 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
2017-02-20 |
heinrichsweikamp |
2.15 start...
|
2017-02-20 |
heinrichsweikamp |
3.14 BETA release
|
2017-02-06 |
heinrichsweikamp |
cleanup pscr menu
|
2017-02-06 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
2017-02-01 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
2017-01-13 |
heinrichsweikamp |
2.12 release candidate...
|
2017-01-04 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
2016-12-18 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
2016-11-19 |
heinrichsweikamp |
battery gauge handling
|
2016-11-02 |
heinrichsweikamp |
CHANGE: Easier to understand "New Battery" menu (OSTC model dependent)
|
2016-10-10 |
heinrichsweikamp |
repeated init (For screen 2 issues)
|
2016-09-27 |
heinrichsweikamp |
2.1 stable work...
|
2016-09-19 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
2016-08-30 |
heinrichsweikamp |
work on new battery options
|
2016-08-18 |
heinrichsweikamp |
minor: Default timeout is 5min
|
2016-08-17 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
2016-07-26 |
heinrichsweikamp |
+BUGFIX: Compatibility with "hwOS Config" fixed
|
2016-07-06 |
heinrichsweikamp |
2.09 beta start
|
2016-06-30 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
2016-06-24 |
heinrichsweikamp |
no screen reboot after logbook exit
|
2016-06-14 |
heinrichsweikamp |
add code for new compass chip
|
2016-05-13 |
heinrichsweikamp |
minor
|
2016-05-12 |
heinrichsweikamp |
ignore 0x47 for standard hwOS
|
2016-04-29 |
heinrichsweikamp |
fix handling for new flash memory chip
|
2016-04-19 |
heinrichsweikamp |
some cleanup
|
2016-04-18 |
heinrichsweikamp |
NEW: Support for new logbook memory chip (minor hardware change)
|
2016-03-15 |
heinrichsweikamp |
2.04beta start
|
2016-03-11 |
heinrichsweikamp |
BUGFIX: Fix missing ccr setup menu (From 2.02)
|
2016-03-08 |
heinrichsweikamp |
BUGFIX: Fix rare issue after battery change (OSTC3 did not start properly)
|
2016-02-01 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
2016-01-10 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
2016-01-10 |
heinrichsweikamp |
NEW: Logbook shows markers with small orange boxes in the profile
|
2015-11-24 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
2015-11-23 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
2015-11-23 |
heinrichsweikamp |
some documentation added
|
2015-11-05 |
heinrichsweikamp |
tweak response timing in comm mode
|
2015-10-27 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
2015-10-19 |
heinrichsweikamp |
BUGFIX: German texts in ppo2 menu were too long for screen resulting in resulting in text display issues
|
2015-10-07 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
2015-09-19 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
2015-09-15 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
2015-09-07 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
2015-08-27 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
2015-08-16 |
heinrichsweikamp |
Additional temperature calibration via PC interface
|
2015-08-15 |
heinrichsweikamp |
jump to 1.87
|
2015-08-04 |
heinrichsweikamp |
cleanup
|
2015-08-04 |
heinrichsweikamp |
1.85beta release
|
2015-08-03 |
heinrichsweikamp |
hardware support
|
2015-07-28 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
2015-07-20 |
heinrichsweikamp |
CHANGE: GF and aGF high range increased to 45-110%
|
2015-07-20 |
heinrichsweikamp |
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
|
2015-07-06 |
heinrichsweikamp |
Show ppo2 <1bar with leading zero
|
2015-07-03 |
heinrichsweikamp |
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
|
2015-06-28 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
2015-06-28 |
janos_kovacs |
Always show ppO2 (warning position, standard color) option
new_screen_layout
|
2015-06-28 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
2015-06-14 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
2015-06-13 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
2015-06-11 |
heinrichsweikamp |
move flag13 into bank common
new_screen_layout
|
2015-06-10 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
2015-06-07 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
2015-06-02 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
2015-06-01 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
2015-05-31 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
2015-05-27 |
heinrichsweikamp |
1.82beta with new compass calib code
|
2015-05-26 |
heinrichsweikamp |
bugfix wrong profile length in header
|
2015-05-18 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
2015-05-07 |
heinrichsweikamp |
rename into hwOS
base
src/ostc3.inc@4e674af8b39e
|