| Thu, 14 Oct 2021 12:03:24 +0200 |
heinrichs weikamp |
3.16 release
|
| Fri, 21 Feb 2020 10:51:36 +0100 |
heinrichsweikamp |
3.08 stable release
|
| Sun, 30 Jun 2019 23:22:32 +0200 |
heinrichsweikamp |
minor cleanup, reset rx circuity
|
| Sun, 23 Jun 2019 15:21:16 +0200 |
heinrichsweikamp |
compass3 support for 3.01 branch
|
| Mon, 03 Jun 2019 14:01:48 +0200 |
heinrichsweikamp |
3.03 beta released
|
| Sat, 23 Feb 2019 16:51:14 +0100 |
heinrichsweikamp |
3.01 release
|
| Fri, 22 Feb 2019 16:30:05 +0100 |
heinrichsweikamp |
potential compass bug "fixed"
|
| Wed, 06 Feb 2019 13:43:02 +0100 |
heinrichsweikamp |
3.00 release
|
| Mon, 04 Feb 2019 22:57:24 +0100 |
heinrichsweikamp |
work on new battery menu
|
| Sun, 03 Feb 2019 09:33:50 +0100 |
heinrichsweikamp |
Threshold at 318.1K
|
| Sat, 02 Feb 2019 19:22:16 +0100 |
heinrichsweikamp |
work on new battery menu
|
| Sat, 02 Feb 2019 17:39:44 +0100 |
heinrichsweikamp |
work on new battery menu
|
| Wed, 30 Jan 2019 21:46:42 +0100 |
heinrichsweikamp |
work on new battery menu
|
| Wed, 30 Jan 2019 16:27:56 +0100 |
heinrichsweikamp |
fix for italian and french language
|
| Wed, 09 Jan 2019 21:53:02 +0100 |
heinrichsweikamp |
TODO: screendump debug
|
| Wed, 09 Jan 2019 21:28:53 +0100 |
heinrichsweikamp |
undo BOR bit
|
| Wed, 09 Jan 2019 15:13:36 +0100 |
heinrichsweikamp |
TR Battery menu
|
| Mon, 07 Jan 2019 21:13:43 +0100 |
heinrichsweikamp |
work on 2.99 stable
|
| Thu, 29 Nov 2018 10:50:57 +0100 |
heinrichsweikamp |
version allignment in menu corrected, 2.99beta5 release
|
| Thu, 22 Nov 2018 19:47:26 +0100 |
heinrichsweikamp |
bump to 2.99beta, work on 3.00 stable
|
| Thu, 11 Oct 2018 21:06:29 +0200 |
heinrichsweikamp |
second method to detect a full charge
|
| Mon, 27 Aug 2018 09:40:31 +0200 |
heinrichsweikamp |
2.98 release
|
| Tue, 14 Aug 2018 11:01:47 +0200 |
heinrichsweikamp |
Fix false CNS readings in logbook
|
| Sun, 12 Aug 2018 18:18:41 +0200 |
heinrichsweikamp |
fix typo
|
| Sun, 12 Aug 2018 18:10:10 +0200 |
heinrichsweikamp |
Identify battery type in menu
|
| Mon, 30 Jul 2018 19:45:53 +0200 |
heinrichsweikamp |
BUGFIX: Internal deco planner did not display results in imperial units
|
| Sun, 08 Jul 2018 12:22:20 +0200 |
heinrichsweikamp |
BUGFIX: "lost gas" was re-activated in rare cases
|
| Mon, 25 Jun 2018 18:29:54 +0200 |
heinrichsweikamp |
2.97 SP2 (999bar fix)
|
| Thu, 17 May 2018 20:46:33 +0200 |
heinrichsweikamp |
2.97 SP1 release
|
| Wed, 18 Apr 2018 17:03:52 +0200 |
heinrichsweikamp |
BUGFIX: Re-enable Sensors after sleep in PSCR mode
|
| Thu, 15 Mar 2018 20:43:38 +0100 |
heinrichsweikamp |
BUGFIX: handle two deco gases configured to the same change depth
|
| Thu, 01 Mar 2018 11:12:47 +0100 |
heinrichsweikamp |
2.97 release
|
| Tue, 27 Feb 2018 12:27:31 +0100 |
heinrichsweikamp |
optical input work
|
| Mon, 26 Feb 2018 16:40:28 +0100 |
heinrichsweikamp |
work on 2.97 stable
|
| Wed, 21 Feb 2018 19:30:28 +0100 |
heinrichsweikamp |
2.97 work...
|
| Wed, 21 Feb 2018 13:52:45 +0100 |
heinrichsweikamp |
Work-Around for 2.97 stable
|
| Fri, 16 Feb 2018 12:15:43 +0100 |
heinrichsweikamp |
Italian update
|
| Thu, 15 Feb 2018 10:03:33 +0100 |
heinrichsweikamp |
French updates
|
| Wed, 14 Feb 2018 16:27:54 +0100 |
heinrichsweikamp |
language, compass and color update
|
| Tue, 13 Feb 2018 14:55:43 +0100 |
heinrichsweikamp |
docu update
|
| Mon, 12 Feb 2018 16:24:58 +0100 |
heinrichsweikamp |
Fix time of dive in internal logbook
|
| Fri, 09 Feb 2018 11:22:42 +0100 |
heinrichsweikamp |
language updates
|
| Thu, 08 Feb 2018 20:31:24 +0100 |
heinrichsweikamp |
language updates
|
| Thu, 08 Feb 2018 13:23:53 +0100 |
heinrichsweikamp |
minor
|
| Tue, 06 Feb 2018 10:07:38 +0100 |
heinrichsweikamp |
CHANGE: Limit button sensitivity to 80%
|
| Mon, 05 Feb 2018 17:59:55 +0100 |
heinrichsweikamp |
bring digital S8 HUD back to life...
|
| Sat, 03 Feb 2018 15:17:01 +0100 |
heinrichsweikamp |
seperate desat and sat multipliers for GF and Non-GF modes. Set to 100/100 as default in GF mode
|
| Wed, 31 Jan 2018 19:39:37 +0100 |
heinrichsweikamp |
bump to 2.96beta (REFACTORED VERSION)
|
| Tue, 19 Dec 2017 15:29:42 +0100 |
heinrichsweikamp |
2.27 release (FR_IT)
|
| Tue, 19 Dec 2017 15:29:11 +0100 |
heinrichsweikamp |
2.27 release (DE_EN)
|
| Thu, 07 Dec 2017 09:58:40 +0100 |
heinrichsweikamp |
fix a potential issue in the battery managment
|
| Thu, 23 Nov 2017 12:52:36 +0100 |
heinrichsweikamp |
ignore voting logic
|
| Sun, 19 Nov 2017 20:04:16 +0100 |
heinrichsweikamp |
initialize blinking flags properly, apply fixes from 2.92 into 2.27beta
|
| Sun, 19 Nov 2017 18:43:27 +0100 |
heinrichsweikamp |
Display dezimal for temperatures between 10 and 0?C
|
| Sun, 19 Nov 2017 17:22:11 +0100 |
heinrichsweikamp |
BUGFIX: Display of negative (?C) water temperatures
|
| Wed, 27 Sep 2017 09:55:15 +0200 |
heinrichsweikamp |
2.26 stable release (DE_EN)
|
| Mon, 25 Sep 2017 19:02:42 +0200 |
heinrichsweikamp |
2.26 stable RC1
|
| Fri, 08 Sep 2017 14:04:38 +0200 |
heinrichsweikamp |
minor cleanup, 2.25 stable RC3
|
| Fri, 08 Sep 2017 13:36:04 +0200 |
heinrichsweikamp |
2.25 stable RC2
|
| Thu, 07 Sep 2017 14:25:22 +0200 |
heinrichsweikamp |
2.25 stable RC
|
| Wed, 06 Sep 2017 21:26:18 +0200 |
heinrichsweikamp |
BUGFIX: Simulator in CC mode
|
| Wed, 06 Sep 2017 15:34:49 +0200 |
heinrichsweikamp |
NEW: Show Compass calibration results in Compass menu
|
| Wed, 06 Sep 2017 11:08:59 +0200 |
heinrichsweikamp |
BUGFIX: "lost gas" showed current set of gases (Diluents in CC, OC in Bailout) for both "lost gas" menus
|
| Tue, 05 Sep 2017 15:32:51 +0200 |
heinrichsweikamp |
minor simulator fix
|
| Fri, 01 Sep 2017 13:18:38 +0200 |
heinrichsweikamp |
2.23beta release
|
| Mon, 28 Aug 2017 18:45:45 +0200 |
heinrichsweikamp |
Re-insert Rev. 530 changes into gaslist.asm
|
| Fri, 25 Aug 2017 11:07:52 +0200 |
heinrichsweikamp |
2.22 internal release
|
| Tue, 22 Aug 2017 15:14:06 +0200 |
heinrichsweikamp |
update customview mask to (eventually) rewrite ppO2(Dil): to ppO2:
|
| Tue, 22 Aug 2017 13:23:52 +0200 |
heinrichsweikamp |
NEW: Show a warning for each sensor if the sensor is end-of-life after calibration (Less then 8mV in Air at sea level)
|
| Mon, 21 Aug 2017 15:11:06 +0200 |
heinrichsweikamp |
Setpoint Change Depth Fix
|
| Mon, 21 Aug 2017 14:55:36 +0200 |
heinrichsweikamp |
CHANGE: CCR Calibration gas range limited to O2% 21-25 and 95-100 to save button presses
|
| Mon, 21 Aug 2017 14:25:02 +0200 |
heinrichsweikamp |
Minor French text update, roll-back gaslist.asm changes
|
| Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
| Sun, 06 Aug 2017 20:12:49 +0200 |
heinrichsweikamp |
BUGFIX: Ignore "Toggle GF" Menu entry (in divemode) when using the non-GF deco mode
|
| Sat, 05 Aug 2017 17:36:58 +0200 |
heinrichsweikamp |
BUGFIX: O2 as diluent in CCR caused wrong calculations (Deco, EAD, END) in less then 6m depth
|
| Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
| Sat, 05 Aug 2017 15:04:08 +0200 |
heinrichsweikamp |
BUGFIX: Do not show GF in divemode for non-GF deco mode
|
| Sat, 05 Aug 2017 10:58:40 +0200 |
heinrichsweikamp |
menu work
|
| Fri, 04 Aug 2017 19:20:58 +0200 |
heinrichsweikamp |
BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
|
| Fri, 04 Aug 2017 16:19:50 +0200 |
heinrichsweikamp |
BUGFIX: Impossible fixed-ppO2 (e.g. 1,6bar in 3m) used for tissue calculations
|
| Fri, 04 Aug 2017 16:01:28 +0200 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
| Thu, 03 Aug 2017 17:03:05 +0200 |
heinrichsweikamp |
CHANGE: Show actual GF (Not relative) in custom views in dive mode
|
| Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
| Sat, 15 Jul 2017 10:38:35 +0200 |
heinrichsweikamp |
hex build
|
| Tue, 04 Jul 2017 16:12:53 +0200 |
heinrichsweikamp |
BUGFIX: Lost Diluent now possible in CCR and PSCR mode
|
| Fri, 30 Jun 2017 15:12:56 +0200 |
heinrichsweikamp |
BUGFIX: Planner in CCR mode used OC gases for volume calculations in some cases
|
| Thu, 29 Jun 2017 11:47:08 +0200 |
heinrichsweikamp |
2.18 beta release
|
| Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
| Mon, 26 Jun 2017 13:02:04 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
| Mon, 26 Jun 2017 12:30:54 +0200 |
heinrichsweikamp |
BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
|
| Sun, 11 Jun 2017 17:11:40 +0200 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
| Fri, 09 Jun 2017 14:47:02 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
|
| Mon, 22 May 2017 23:03:21 +0200 |
heinrichsweikamp |
minor
|
| Thu, 11 May 2017 15:39:40 +0200 |
heinrichsweikamp |
Battery % in logbook when updated from Sport to Tech
|
| Wed, 19 Apr 2017 12:54:00 +0200 |
heinrichsweikamp |
compass1 full scale gain test
|
| Mon, 03 Apr 2017 12:21:03 +0200 |
heinrichsweikamp |
2.15 release
|
| Sun, 02 Apr 2017 21:14:01 +0200 |
heinrichsweikamp |
show battery % in logbook (For dives made with 2.15 or newer)
|
| Sun, 02 Apr 2017 20:21:10 +0200 |
heinrichsweikamp |
Bugfix: More then one marker shown deleted profile
|
| Thu, 30 Mar 2017 15:08:00 +0200 |
heinrichsweikamp |
2.15 rc
|
| Thu, 30 Mar 2017 11:57:54 +0200 |
heinrichsweikamp |
2.15 rc
|
| Thu, 30 Mar 2017 10:41:43 +0200 |
heinrichsweikamp |
minor new sleepmode fix
|
| Wed, 29 Mar 2017 21:35:12 +0200 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
| Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
| Mon, 20 Feb 2017 15:51:51 +0100 |
heinrichsweikamp |
2.15 start...
|
| Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
| Mon, 20 Feb 2017 11:56:10 +0100 |
heinrichsweikamp |
Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
|
| Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
| Mon, 06 Feb 2017 17:24:05 +0100 |
heinrichsweikamp |
cleanup pscr menu
|
| Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
| Wed, 01 Feb 2017 13:51:59 +0100 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
| Tue, 17 Jan 2017 11:57:52 +0100 |
heinrichsweikamp |
2.12 release
|
| Mon, 16 Jan 2017 11:59:55 +0100 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
| Mon, 16 Jan 2017 11:05:02 +0100 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|
| Fri, 13 Jan 2017 13:08:17 +0100 |
heinrichsweikamp |
2.12 release candidate...
|
| Wed, 04 Jan 2017 15:04:42 +0100 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
| Sun, 18 Dec 2016 18:20:39 +0100 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
| Sun, 11 Dec 2016 14:43:56 +0100 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
| Fri, 25 Nov 2016 14:51:11 +0100 |
heinrichsweikamp |
minor
|
| Sun, 20 Nov 2016 12:54:36 +0100 |
heinrichsweikamp |
battery gauge handling
|
| Sat, 19 Nov 2016 18:37:47 +0100 |
heinrichsweikamp |
battery gauge handling
|
