| Tue, 05 May 2015 14:58:16 +0200 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
| Mon, 04 May 2015 12:56:07 +0200 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
| Wed, 29 Apr 2015 16:54:58 +0200 |
heinrichsweikamp |
1.78 release
|
| Sun, 19 Apr 2015 20:41:48 +0200 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
| Thu, 16 Apr 2015 11:30:00 +0200 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
| Tue, 14 Apr 2015 16:16:14 +0200 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|
| Mon, 30 Mar 2015 14:59:07 +0200 |
heinrichsweikamp |
1.76 release
|
| Fri, 13 Mar 2015 10:49:43 +0100 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
| Sun, 01 Mar 2015 21:10:14 +0100 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
| Thu, 26 Feb 2015 13:13:23 +0100 |
heinrichsweikamp |
1.75 release
|
| Wed, 25 Feb 2015 11:51:50 +0100 |
heinrichsweikamp |
show start gas in normal font
|
| Sat, 21 Feb 2015 20:05:57 +0100 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
| Mon, 02 Feb 2015 17:39:38 +0100 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
| Sun, 01 Feb 2015 18:49:24 +0100 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
| Wed, 14 Jan 2015 11:37:19 +0100 |
heinrichsweikamp |
PC config, 1.72 release
|
| Tue, 06 Jan 2015 19:24:58 +0100 |
heinrichsweikamp |
check opt_max correctly
|
| Wed, 17 Dec 2014 14:46:45 +0100 |
heinrichsweikamp |
1.7 release
|
| Mon, 15 Dec 2014 19:50:51 +0100 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
| Sun, 07 Dec 2014 12:47:19 +0100 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
| Mon, 10 Nov 2014 13:54:20 +0100 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
| Mon, 27 Oct 2014 11:28:48 +0100 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
| Sat, 25 Oct 2014 15:28:18 +0200 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
| Sat, 18 Oct 2014 10:03:28 +0200 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
| Fri, 17 Oct 2014 13:31:14 +0200 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
| Thu, 16 Oct 2014 13:11:18 +0200 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
| Thu, 09 Oct 2014 11:18:56 +0200 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
| Tue, 07 Oct 2014 13:45:21 +0200 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
| Mon, 06 Oct 2014 11:48:23 +0200 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
| Sun, 05 Oct 2014 15:36:17 +0200 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
| Wed, 01 Oct 2014 10:31:53 +0200 |
heinrichsweikamp |
minor
|
