Mon, 21 Aug 2017 14:25:02 +0200 |
heinrichsweikamp |
Minor French text update, roll-back gaslist.asm changes
|
Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
Sun, 06 Aug 2017 20:12:49 +0200 |
heinrichsweikamp |
BUGFIX: Ignore "Toggle GF" Menu entry (in divemode) when using the non-GF deco mode
|
Sat, 05 Aug 2017 17:36:58 +0200 |
heinrichsweikamp |
BUGFIX: O2 as diluent in CCR caused wrong calculations (Deco, EAD, END) in less then 6m depth
|
Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
Sat, 05 Aug 2017 15:04:08 +0200 |
heinrichsweikamp |
BUGFIX: Do not show GF in divemode for non-GF deco mode
|
Sat, 05 Aug 2017 10:58:40 +0200 |
heinrichsweikamp |
menu work
|
Fri, 04 Aug 2017 19:20:58 +0200 |
heinrichsweikamp |
BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
|
Fri, 04 Aug 2017 16:19:50 +0200 |
heinrichsweikamp |
BUGFIX: Impossible fixed-ppO2 (e.g. 1,6bar in 3m) used for tissue calculations
|
Fri, 04 Aug 2017 16:01:28 +0200 |
heinrichsweikamp |
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
|
Thu, 03 Aug 2017 17:03:05 +0200 |
heinrichsweikamp |
CHANGE: Show actual GF (Not relative) in custom views in dive mode
|
Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
Sat, 15 Jul 2017 10:38:35 +0200 |
heinrichsweikamp |
hex build
|
Tue, 04 Jul 2017 16:12:53 +0200 |
heinrichsweikamp |
BUGFIX: Lost Diluent now possible in CCR and PSCR mode
|
Fri, 30 Jun 2017 15:12:56 +0200 |
heinrichsweikamp |
BUGFIX: Planner in CCR mode used OC gases for volume calculations in some cases
|
Thu, 29 Jun 2017 11:47:08 +0200 |
heinrichsweikamp |
2.18 beta release
|
Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
Mon, 26 Jun 2017 13:02:04 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
|
Mon, 26 Jun 2017 12:30:54 +0200 |
heinrichsweikamp |
BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
|
Sun, 11 Jun 2017 17:11:40 +0200 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
Fri, 09 Jun 2017 14:47:02 +0200 |
heinrichsweikamp |
BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
|
Mon, 22 May 2017 23:03:21 +0200 |
heinrichsweikamp |
minor
|
Thu, 11 May 2017 15:39:40 +0200 |
heinrichsweikamp |
Battery % in logbook when updated from Sport to Tech
|
Wed, 19 Apr 2017 12:54:00 +0200 |
heinrichsweikamp |
compass1 full scale gain test
|
Mon, 03 Apr 2017 12:21:03 +0200 |
heinrichsweikamp |
2.15 release
|
Sun, 02 Apr 2017 21:14:01 +0200 |
heinrichsweikamp |
show battery % in logbook (For dives made with 2.15 or newer)
|
Sun, 02 Apr 2017 20:21:10 +0200 |
heinrichsweikamp |
Bugfix: More then one marker shown deleted profile
|
Thu, 30 Mar 2017 15:08:00 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 11:57:54 +0200 |
heinrichsweikamp |
2.15 rc
|
Thu, 30 Mar 2017 10:41:43 +0200 |
heinrichsweikamp |
minor new sleepmode fix
|
Wed, 29 Mar 2017 21:35:12 +0200 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
Mon, 20 Feb 2017 15:51:51 +0100 |
heinrichsweikamp |
2.15 start...
|
Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
Mon, 20 Feb 2017 11:56:10 +0100 |
heinrichsweikamp |
Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
|
Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
Mon, 06 Feb 2017 17:24:05 +0100 |
heinrichsweikamp |
cleanup pscr menu
|
Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
Wed, 01 Feb 2017 13:51:59 +0100 |
heinrichsweikamp |
BUGFIX: Layout fixes in Gauge mode (German and French language only)
|
Tue, 17 Jan 2017 11:57:52 +0100 |
heinrichsweikamp |
2.12 release
|
Mon, 16 Jan 2017 11:59:55 +0100 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
Mon, 16 Jan 2017 11:05:02 +0100 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|
Fri, 13 Jan 2017 13:08:17 +0100 |
heinrichsweikamp |
2.12 release candidate...
|
Wed, 04 Jan 2017 15:04:42 +0100 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
Sun, 18 Dec 2016 18:20:39 +0100 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
Sun, 11 Dec 2016 14:43:56 +0100 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
Fri, 25 Nov 2016 14:51:11 +0100 |
heinrichsweikamp |
minor
|
Sun, 20 Nov 2016 12:54:36 +0100 |
heinrichsweikamp |
battery gauge handling
|
Sat, 19 Nov 2016 18:37:47 +0100 |
heinrichsweikamp |
battery gauge handling
|
Fri, 18 Nov 2016 10:49:32 +0100 |
heinrichsweikamp |
BUGFIX: Minor layout corrections in imperial units dive screen
|
Wed, 02 Nov 2016 15:46:22 +0100 |
heinrichsweikamp |
CHANGE: Easier to understand "New Battery" menu (OSTC model dependent)
|
Mon, 31 Oct 2016 15:21:12 +0100 |
heinrichsweikamp |
minor cleanups
|
Fri, 28 Oct 2016 11:30:50 +0200 |
heinrichsweikamp |
CHANGE: Indicate "Bailout" for bailout deco plan in internal deco planer
|
Mon, 10 Oct 2016 19:53:09 +0200 |
heinrichsweikamp |
repeated init (For screen 2 issues)
|
Mon, 10 Oct 2016 14:48:43 +0200 |
heinrichsweikamp |
French/Italian release
|
Mon, 10 Oct 2016 10:59:19 +0200 |
heinrichsweikamp |
2.10 release
|
Wed, 28 Sep 2016 12:04:12 +0200 |
heinrichsweikamp |
show language version in information menu
|
Wed, 28 Sep 2016 11:16:31 +0200 |
heinrichsweikamp |
recover old battery status prior 2.09
|
Tue, 27 Sep 2016 16:40:14 +0200 |
heinrichsweikamp |
NEW: Store more battery info into logbook memory
|
Tue, 27 Sep 2016 16:03:31 +0200 |
heinrichsweikamp |
minor: fix some alignments for OSTC cR
|
Mon, 19 Sep 2016 16:32:02 +0200 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
Thu, 01 Sep 2016 13:24:17 +0200 |
heinrichsweikamp |
speedup analog presses
|
Wed, 31 Aug 2016 14:48:10 +0200 |
heinrichsweikamp |
bugfix "old battery" type
|
Tue, 30 Aug 2016 17:26:21 +0200 |
heinrichsweikamp |
work on new battery options
|
Wed, 17 Aug 2016 09:50:37 +0200 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
Tue, 26 Jul 2016 12:25:02 +0200 |
heinrichsweikamp |
minor
|
Tue, 26 Jul 2016 12:08:29 +0200 |
heinrichsweikamp |
+BUGFIX: Compatibility with "hwOS Config" fixed
|
Thu, 30 Jun 2016 10:28:12 +0200 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
Fri, 24 Jun 2016 12:51:14 +0200 |
heinrichsweikamp |
no screen reboot after logbook exit
|
Thu, 23 Jun 2016 10:59:42 +0200 |
heinrichsweikamp |
Logbook marker temporally disabled in internal logbook
|
Wed, 22 Jun 2016 21:33:15 +0200 |
heinrichsweikamp |
hunting a bug in the logbook (Day 3)
|
Wed, 22 Jun 2016 12:36:15 +0200 |
heinrichsweikamp |
hunting a bug in the logbook (Day 2)
|
Tue, 21 Jun 2016 17:20:44 +0200 |
heinrichsweikamp |
hunting a bug in the logbook...
|
Thu, 16 Jun 2016 13:21:46 +0200 |
heinrichsweikamp |
hardware_flag handling
|
Wed, 15 Jun 2016 12:26:48 +0200 |
heinrichsweikamp |
some cleanup
|
Mon, 02 May 2016 12:41:20 +0200 |
heinrichsweikamp |
_another_ timing fix for firmware updates (2.07 was not published yet anyway)
|
Fri, 29 Apr 2016 16:51:44 +0200 |
heinrichsweikamp |
2.07 release
|
Fri, 29 Apr 2016 16:40:10 +0200 |
heinrichsweikamp |
fix Page-Program timing
|
Fri, 29 Apr 2016 15:38:57 +0200 |
heinrichsweikamp |
fix handling for new flash memory chip
|
Mon, 25 Apr 2016 15:25:32 +0200 |
heinrichsweikamp |
CHANGE: Remove ppO2 [Dil] from OC dive mode screen
|
Tue, 19 Apr 2016 14:03:24 +0200 |
heinrichsweikamp |
some cleanup
|
Mon, 18 Apr 2016 17:29:19 +0200 |
heinrichsweikamp |
minor
|
Mon, 18 Apr 2016 14:34:57 +0200 |
heinrichsweikamp |
NEW: Support for new logbook memory chip (minor hardware change)
|
Sun, 10 Apr 2016 11:46:55 +0200 |
heinrichsweikamp |
minor
|
Tue, 29 Mar 2016 12:35:47 +0200 |
heinrichsweikamp |
support for new flash memory
|
Tue, 22 Mar 2016 16:39:00 +0100 |
heinrichsweikamp |
NEW: New Customview shows ppO2(O2) and ppO2(Diluent) during CCR mode
|
Tue, 15 Mar 2016 12:19:12 +0100 |
heinrichsweikamp |
2.04beta start
|
Fri, 11 Mar 2016 10:11:07 +0100 |
heinrichsweikamp |
BUGFIX: Fix missing ccr setup menu (From 2.02)
|
Tue, 08 Mar 2016 11:42:58 +0100 |
heinrichsweikamp |
BUGFIX: Fix rare issue after battery change (OSTC3 did not start properly)
|
Tue, 02 Feb 2016 11:09:14 +0100 |
heinrichsweikamp |
2.01 release
|
Tue, 02 Feb 2016 10:36:54 +0100 |
heinrichsweikamp |
Minor language updates
|
Mon, 01 Feb 2016 20:44:01 +0100 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
Mon, 11 Jan 2016 15:32:08 +0100 |
heinrichsweikamp |
2.00 release
|
Sun, 10 Jan 2016 11:24:33 +0100 |
heinrichsweikamp |
NEW: "Lost Gas" feature allows disabling gases during the dive
|
Sun, 10 Jan 2016 09:36:47 +0100 |
heinrichsweikamp |
NEW: Logbook shows markers with small orange boxes in the profile
|
Sat, 09 Jan 2016 11:42:01 +0100 |
heinrichsweikamp |
Logbook marker can be set in dive mode menu (OC only)
|
Thu, 10 Dec 2015 13:36:47 +0100 |
heinrichsweikamp |
1.94beta release
|
Tue, 24 Nov 2015 16:22:52 +0100 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
Mon, 23 Nov 2015 16:13:25 +0100 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
Mon, 16 Nov 2015 11:04:27 +0100 |
heinrichsweikamp |
1.93 release
|
Fri, 06 Nov 2015 11:48:40 +0100 |
heinrichsweikamp |
BUGFIX: minor text allignment in CCR mode
|
Thu, 05 Nov 2015 20:15:52 +0100 |
heinrichsweikamp |
tweak response timing in comm mode
|
Tue, 03 Nov 2015 11:35:29 +0100 |
heinrichsweikamp |
NEW: Show actual dive count in logbook list view (If <1000)
|
Mon, 02 Nov 2015 17:48:20 +0100 |
heinrichsweikamp |
add profile version to compact headers
|
Wed, 28 Oct 2015 10:40:56 +0100 |
heinrichsweikamp |
Fix text alignment for French version
|
Tue, 27 Oct 2015 13:45:10 +0100 |
heinrichsweikamp |
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
|
Mon, 19 Oct 2015 15:06:59 +0200 |
heinrichsweikamp |
BUGFIX: German texts in ppo2 menu were too long for screen resulting in resulting in text display issues
|
Fri, 09 Oct 2015 12:57:42 +0200 |
heinrichsweikamp |
1.90 release
|
Wed, 07 Oct 2015 14:46:39 +0200 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
Wed, 07 Oct 2015 13:14:09 +0200 |
heinrichsweikamp |
BUGFIX: +5min for stopwatch during simulation did not work
|
Tue, 06 Oct 2015 12:55:01 +0200 |
heinrichsweikamp |
minor language update (german)
|
Wed, 30 Sep 2015 15:38:28 +0200 |
heinrichsweikamp |
language updates
|
Wed, 23 Sep 2015 17:35:19 +0200 |
heinrichsweikamp |
allow compass bearing on surface
|
Sat, 19 Sep 2015 13:41:40 +0200 |
heinrichsweikamp |
BUGFIX: Battery consumption calculation in sleep mode (3,6V battery only)
|
Tue, 15 Sep 2015 18:11:08 +0200 |
heinrichsweikamp |
BUGFIX: BLE timings for MAC issues
|
Thu, 10 Sep 2015 13:05:26 +0200 |
heinrichsweikamp |
set char_I_current_gas for gas6 use
|
Mon, 07 Sep 2015 13:58:23 +0200 |
heinrichsweikamp |
CHANGE: Do not show ppO2 in warning area if already shown in custom view
|
Thu, 27 Aug 2015 17:05:13 +0200 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
Wed, 19 Aug 2015 18:40:01 +0200 |
heinrichsweikamp |
logbook work
|
Wed, 19 Aug 2015 16:27:00 +0200 |
heinrichsweikamp |
fix some display issues with display1
|