| Tue, 28 Apr 2020 17:34:31 +0200 |
heinrichsweikamp |
3.10 stable release
|
| Fri, 28 Feb 2020 15:45:07 +0100 |
heinrichsweikamp |
3.09 beta 1 release
|
| Fri, 29 Nov 2019 18:48:11 +0100 |
heinrichsweikamp |
3.07 stable release
|
| Thu, 19 Sep 2019 12:01:29 +0200 |
heinrichsweikamp |
3.05 stable work
|
| Mon, 03 Jun 2019 14:01:48 +0200 |
heinrichsweikamp |
3.03 beta released
|
| Sat, 23 Feb 2019 16:51:14 +0100 |
heinrichsweikamp |
3.01 release
|
| Thu, 22 Nov 2018 19:47:26 +0100 |
heinrichsweikamp |
bump to 2.99beta, work on 3.00 stable
|
| Sat, 10 Mar 2018 15:34:47 +0100 |
heinrichsweikamp |
V2.97 SP1
|
| Mon, 26 Feb 2018 16:40:28 +0100 |
heinrichsweikamp |
work on 2.97 stable
|
| Mon, 05 Feb 2018 17:59:55 +0100 |
heinrichsweikamp |
bring digital S8 HUD back to life...
|
| Wed, 31 Jan 2018 19:39:37 +0100 |
heinrichsweikamp |
bump to 2.96beta (REFACTORED VERSION)
|
| Tue, 22 Aug 2017 13:23:52 +0200 |
heinrichsweikamp |
NEW: Show a warning for each sensor if the sensor is end-of-life after calibration (Less then 8mV in Air at sea level)
|
| Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
| Mon, 26 Jun 2017 12:30:54 +0200 |
heinrichsweikamp |
BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
|
| Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
| Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
| Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
| Mon, 16 Jan 2017 11:05:02 +0100 |
heinrichsweikamp |
no sensors in surface mode if the computer has no sensor inputs
|
| Wed, 23 Sep 2015 17:35:19 +0200 |
heinrichsweikamp |
allow compass bearing on surface
|
| Thu, 27 Aug 2015 17:05:13 +0200 |
heinrichsweikamp |
1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
|
| Wed, 29 Jul 2015 20:39:35 +0200 |
heinrichsweikamp |
some cleanups
|
| Tue, 28 Jul 2015 13:23:09 +0200 |
heinrichsweikamp |
add setpoint change to first sample in CCR mode
|
| Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
| Mon, 23 Mar 2015 18:02:40 +0100 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
| Wed, 04 Mar 2015 19:01:57 +0100 |
heinrichsweikamp |
use single-byte hardware flag (again)
|
| Wed, 25 Feb 2015 16:49:59 +0100 |
heinrichsweikamp |
under construction: new hardware_flag to configure different hardware versions
|
| Wed, 25 Feb 2015 13:57:30 +0100 |
heinrichsweikamp |
Show OSTC2-like active gas boxes in surface mode
|
| Wed, 25 Feb 2015 11:51:50 +0100 |
heinrichsweikamp |
show start gas in normal font
|
| Sun, 22 Feb 2015 12:14:03 -0400 |
mh |
show start gas in OC mode permanently
|
| Fri, 20 Feb 2015 00:15:22 +0100 |
mh |
Bugfix: Check for divemode before checking for menu
|
| Mon, 02 Feb 2015 17:04:43 +0100 |
heinrichsweikamp |
button config (cR)
|
| Mon, 05 Jan 2015 16:13:15 +0100 |
heinrichsweikamp |
minor: configure buttons during splash screen
|
