log tools/dev_ostc3_firmware.hex @ 551:33941d158069

age author description
2017-09-27 heinrichsweikamp 2.26 stable release (DE_EN)
2017-09-25 heinrichsweikamp 2.26 stable RC1
2017-09-08 heinrichsweikamp minor cleanup, 2.25 stable RC3
2017-09-08 heinrichsweikamp 2.25 stable RC2
2017-09-07 heinrichsweikamp 2.25 stable RC
2017-09-06 heinrichsweikamp BUGFIX: Simulator in CC mode
2017-09-06 heinrichsweikamp NEW: Show Compass calibration results in Compass menu
2017-09-06 heinrichsweikamp BUGFIX: "lost gas" showed current set of gases (Diluents in CC, OC in Bailout) for both "lost gas" menus
2017-09-05 heinrichsweikamp minor simulator fix
2017-09-01 heinrichsweikamp 2.23beta release
2017-08-28 heinrichsweikamp Re-insert Rev. 530 changes into gaslist.asm
2017-08-25 heinrichsweikamp 2.22 internal release
2017-08-22 heinrichsweikamp update customview mask to (eventually) rewrite ppO2(Dil): to ppO2:
2017-08-22 heinrichsweikamp NEW: Show a warning for each sensor if the sensor is end-of-life after calibration (Less then 8mV in Air at sea level)
2017-08-21 heinrichsweikamp Setpoint Change Depth Fix
2017-08-21 heinrichsweikamp CHANGE: CCR Calibration gas range limited to O2% 21-25 and 95-100 to save button presses
2017-08-21 heinrichsweikamp Minor French text update, roll-back gaslist.asm changes
2017-08-17 heinrichsweikamp 2.20beta release
2017-08-06 heinrichsweikamp BUGFIX: Ignore "Toggle GF" Menu entry (in divemode) when using the non-GF deco mode
2017-08-05 heinrichsweikamp BUGFIX: O2 as diluent in CCR caused wrong calculations (Deco, EAD, END) in less then 6m depth
2017-08-05 heinrichsweikamp BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
2017-08-05 heinrichsweikamp BUGFIX: Do not show GF in divemode for non-GF deco mode
2017-08-05 heinrichsweikamp menu work
2017-08-04 heinrichsweikamp BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
2017-08-04 heinrichsweikamp BUGFIX: Impossible fixed-ppO2 (e.g. 1,6bar in 3m) used for tissue calculations
2017-08-04 heinrichsweikamp CHANGE: Apply safety margin parameters to both models (GF and non-GF)
2017-08-03 heinrichsweikamp CHANGE: Show actual GF (Not relative) in custom views in dive mode
2017-08-03 heinrichsweikamp NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
2017-07-15 heinrichsweikamp hex build
2017-07-04 heinrichsweikamp BUGFIX: Lost Diluent now possible in CCR and PSCR mode
2017-06-30 heinrichsweikamp BUGFIX: Planner in CCR mode used OC gases for volume calculations in some cases
2017-06-29 heinrichsweikamp 2.18 beta release
2017-06-27 heinrichsweikamp NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
2017-06-26 heinrichsweikamp BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
2017-06-26 heinrichsweikamp BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
2017-06-11 heinrichsweikamp NEW: Last Dive customviews in surface mode with divetime, depth and interval
2017-06-09 heinrichsweikamp BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
2017-05-22 heinrichsweikamp minor
2017-05-11 heinrichsweikamp Battery % in logbook when updated from Sport to Tech
2017-04-19 heinrichsweikamp compass1 full scale gain test
2017-04-03 heinrichsweikamp 2.15 release
2017-04-02 heinrichsweikamp show battery % in logbook (For dives made with 2.15 or newer)
2017-04-02 heinrichsweikamp Bugfix: More then one marker shown deleted profile
2017-03-30 heinrichsweikamp 2.15 rc
2017-03-30 heinrichsweikamp 2.15 rc
2017-03-30 heinrichsweikamp minor new sleepmode fix
2017-03-29 heinrichsweikamp NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
2017-03-13 heinrichsweikamp minor
2017-02-20 heinrichsweikamp 2.15 start...
2017-02-20 heinrichsweikamp 3.14 BETA release
2017-02-20 heinrichsweikamp Make opt_PSCR_drop and opt_PSCR_lungratio PC configurable
2017-02-07 heinrichsweikamp New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
2017-02-06 heinrichsweikamp cleanup pscr menu
2017-02-06 heinrichsweikamp NEW: PSCR mode (Passive semi-closed rebreather)
2017-02-01 heinrichsweikamp BUGFIX: Layout fixes in Gauge mode (German and French language only)
2017-01-17 heinrichsweikamp 2.12 release
2017-01-16 heinrichsweikamp NEW: Show battery type in surface mode next to battery voltage
2017-01-16 heinrichsweikamp no sensors in surface mode if the computer has no sensor inputs
2017-01-13 heinrichsweikamp 2.12 release candidate...
2017-01-04 heinrichsweikamp Fix new battery menu on Power-on reset