2015-05-26 |
heinrichsweikamp |
BUGFIX: Fix download issue for dives made with 1.80 firmware
|
2015-05-18 |
heinrichsweikamp |
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
|
2015-05-07 |
heinrichsweikamp |
rename into hwOS
|
2015-05-05 |
heinrichsweikamp |
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
|
2015-05-04 |
heinrichsweikamp |
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
|
2015-04-29 |
heinrichsweikamp |
1.78 release
|
2015-04-19 |
heinrichsweikamp |
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
|
2015-04-16 |
heinrichsweikamp |
BUGFIX: Analog sensors were ignored in 1.76
|
2015-04-14 |
heinrichsweikamp |
Charge done indicator (cR and 2 Hardware)
|
2015-03-30 |
heinrichsweikamp |
1.76 release
|
2015-03-13 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
2015-03-01 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
2015-02-26 |
heinrichsweikamp |
1.75 release
|
2015-02-25 |
heinrichsweikamp |
show start gas in normal font
|
2015-02-21 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
2015-02-02 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
2015-02-01 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
2015-01-14 |
heinrichsweikamp |
PC config, 1.72 release
|
2015-01-06 |
heinrichsweikamp |
check opt_max correctly
|
2014-12-17 |
heinrichsweikamp |
1.7 release
|
2014-12-15 |
heinrichsweikamp |
NEW: On-board simulator can increase divetime in 5min steps
|
2014-12-07 |
heinrichsweikamp |
NEW: Show plan parameters in decoplan result page
|
2014-11-10 |
heinrichsweikamp |
(Slightly) reduce current consumption in Eco and sleep mode
|
2014-10-27 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
2014-10-25 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
2014-10-18 |
heinrichsweikamp |
BUGFIX: Check min and max values after PC configuration properly
|
2014-10-17 |
heinrichsweikamp |
BUGFIX: Quit Apnea mode on the surface manually
|
2014-10-16 |
heinrichsweikamp |
BUGFIX: O2 > 99% was not configurable from the PC
|
2014-10-09 |
heinrichsweikamp |
BUGFIX: END/EAD updated when adjusting current gas during the dive
|
2014-10-07 |
heinrichsweikamp |
BUGFIX: Average depth computation
|
2014-10-06 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
2014-10-05 |
heinrichsweikamp |
CHANGE: Clarify Travel Gases with "---" as change depth
|
2014-10-01 |
heinrichsweikamp |
minor
|
2014-09-30 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
2014-09-29 |
heinrichsweikamp |
CHANGE: Improve internal logbook usability
|
2014-09-29 |
heinrichsweikamp |
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
|
2014-09-28 |
heinrichsweikamp |
BUGFIX: Flip compass with flipped screen, too
|
2014-09-10 |
heinrichsweikamp |
1.52 beta release - 1.53 beta start
|
2014-09-09 |
heinrichsweikamp |
NEW: Safe tissue data, date and time during firmware update
|
2014-09-08 |
heinrichsweikamp |
1.51 beta release - 1.52 beta start
|
2014-08-28 |
heinrichsweikamp |
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
|
2014-08-27 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
2014-08-21 |
heinrichsweikamp |
minor
|
2014-08-21 |
heinrichsweikamp |
BUGFIX: Clear Setpoint-Fallback warning when in bailout
|
2014-08-11 |
heinrichsweikamp |
1.50 stable release
|
2014-08-05 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
2014-08-04 |
heinrichsweikamp |
1.45 beta release
|
2014-07-31 |
heinrichsweikamp |
New changelog.txt format
|
2014-07-17 |
heinrichsweikamp |
Simplify gas change
|
2014-07-15 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
2014-07-14 |
heinrichsweikamp |
BUGFIX: Surface interval was not displayed correctly in some cases
|
2014-07-08 |
heinrichsweikamp |
Bugfix: Start dive mode simulator in correct depth
|
2014-07-04 |
heinrichsweikamp |
NEW: Update warnings every second
|
2014-07-03 |
heinrichsweikamp |
no safety stop during menu display
|
2014-07-01 |
heinrichsweikamp |
1.41beta release
|
2014-06-29 |
heinrichsweikamp |
add ceiling display
|
2014-06-27 |
heinrichsweikamp |
Do not show "GF info" for non-GF modes
|
2014-06-27 |
heinrichsweikamp |
show heading with leading zeros
|
2014-06-23 |
heinrichsweikamp |
Merge
|
2014-06-17 |
heinrichsweikamp |
Bugfix: CNS in planner
|
2014-06-10 |
heinrichsweikamp |
BUGFIX: OSTC settings via USB issues
|
2014-06-05 |
heinrichsweikamp |
BUGFIX: wrong ppo2 recording parameter in short header
|
2014-06-03 |
heinrichsweikamp |
Show HUD voltages only in CCR mode...
|
2014-06-03 |
heinrichsweikamp |
Show a Safety Stop if enabled (Menu "Deco Parameters")
|
2014-06-02 |
heinrichsweikamp |
Minor language updates
|
2014-05-07 |
heinrichsweikamp |
NEW: Show End-of-Dive time together with clock during deco
|
2014-05-02 |
heinrichsweikamp |
1.30 release
|
2014-05-02 |
heinrichsweikamp |
show event "bailout" in the internal logbook
|
2014-04-28 |
heinrichsweikamp |
CHANGE: Always compute bailout plan based on all active gases
|
2014-04-28 |
heinrichsweikamp |
BUGFIX: Show "*" always in front of the initial Setpoint 1
|
2014-04-22 |
heinrichsweikamp |
BUGFIX: compass calibration does now timeout automatically after 60s
|
2014-04-16 |
heinrichsweikamp |
add sensor calibration option (PC only), some cleanup
|
2014-04-15 |
heinrichsweikamp |
NEW: automatic compass gain makes calibration quicker
|
2014-04-15 |
heinrichsweikamp |
BUGFIX: No average depth for end-of-dive portion (<1m)
|
2014-04-02 |
heinrichsweikamp |
CHANGE: Color schemes improved
|
2014-02-26 |
mh |
BUGFIX: Reset Logbook did not reset Logbook TOC properly
|
2014-02-20 |
heinrichsweikamp |
BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
|
2014-02-19 |
heinrichsweikamp |
1.21 release
|
2014-02-11 |
heinrichsweikamp |
change log
|
2014-02-02 |
heinrichsweikamp |
+CHANGE: Some French Translations
|
2014-02-01 |
heinrichsweikamp |
BUGFIX: Set Day for months <31 days
|
2014-01-11 |
heinrichsweikamp |
BUGFIX: Maintain last selected customview in surface mode
|
2014-01-10 |
heinrichsweikamp |
change log
|
2014-01-10 |
heinrichsweikamp |
show battery voltage in info menu
|
2013-12-03 |
heinrichsweikamp |
BUGFIX: Display Desat.-Time >100 hours
|
2013-12-01 |
heinrichsweikamp |
Backlight level in eco mode
|
2013-09-29 |
heinrichsweikamp |
Change "O2" warning to "ppO2"
|
2013-09-29 |
heinrichsweikamp |
some cleanup/changelog
|
2013-09-27 |
heinrichsweikamp |
NEW: user-selectable color schemes
|
2013-09-23 |
heinrichsweikamp |
Time and Date in normal (Not tiny) font
|
2013-09-04 |
heinrichsweikamp |
1.02 beta start
|
2013-08-28 |
heinrichsweikamp |
BUGFIX: Percent display with 1,5V batteries
|
2013-08-15 |
mh |
Surface customview with important deco settings
|
2013-08-15 |
mh |
Bugfix: Simulator in CC mode
|
2013-08-04 |
heinrichsweikamp |
changelog
|
2013-07-22 |
heinrichsweikamp |
GF high lowest setting 60%
|
2013-07-21 |
heinrichsweikamp |
BUGFIX: alternating brightness at very low ambient light
|
2013-07-20 |
heinrichsweikamp |
adding cardinal (and ordinal) directions for the compass
|
2013-07-09 |
heinrichsweikamp |
0.97 release
|
2013-07-09 |
heinrichsweikamp |
fix imperial units in logbook
|
2013-07-03 |
heinrichsweikamp |
changelog
|
2013-06-24 |
heinrichsweikamp |
0.96 release
|
2013-06-11 |
heinrichsweikamp |
Show "MOD:" instead of "EAD:" in gas setup
|
2013-05-26 |
heinrichsweikamp |
Show Max. Depth with 0.1m precision
|
2013-05-15 |
heinrichsweikamp |
Timeout in decoplanner result page
|
2013-05-10 |
heinrichsweikamp |
add changelog
|