log src/changelog.txt @ 250:20e3bad0b0f2

age author description
Fri, 13 Mar 2015 10:49:43 +0100 heinrichsweikamp BUGFIX: Always update CCR sensor data in Sensor-Menu
Sun, 01 Mar 2015 21:10:14 +0100 heinrichsweikamp CNANGE: aGF pair has same range then normal GF pair
Thu, 26 Feb 2015 13:13:23 +0100 heinrichsweikamp 1.75 release
Wed, 25 Feb 2015 11:51:50 +0100 heinrichsweikamp show start gas in normal font
Sat, 21 Feb 2015 20:05:57 +0100 mh BUGFIX: Show average depth with one decimal digit only
Mon, 02 Feb 2015 17:39:38 +0100 heinrichsweikamp NEW: Support for hwHUD without the LED module
Sun, 01 Feb 2015 18:49:24 +0100 heinrichsweikamp BUGFIX: Show dives with >999mins divetime correctly
Wed, 14 Jan 2015 11:37:19 +0100 heinrichsweikamp PC config, 1.72 release
Tue, 06 Jan 2015 19:24:58 +0100 heinrichsweikamp check opt_max correctly
Wed, 17 Dec 2014 14:46:45 +0100 heinrichsweikamp 1.7 release
Mon, 15 Dec 2014 19:50:51 +0100 heinrichsweikamp NEW: On-board simulator can increase divetime in 5min steps
Sun, 07 Dec 2014 12:47:19 +0100 heinrichsweikamp NEW: Show plan parameters in decoplan result page
Mon, 10 Nov 2014 13:54:20 +0100 heinrichsweikamp (Slightly) reduce current consumption in Eco and sleep mode
Mon, 27 Oct 2014 11:28:48 +0100 heinrichsweikamp NEW: Show Bailout Gas List in Surface mode (CCR Modes)
Sat, 25 Oct 2014 15:28:18 +0200 heinrichsweikamp CHANGE: Longer timeout (4 min) for calibration menu
Sat, 18 Oct 2014 10:03:28 +0200 heinrichsweikamp BUGFIX: Check min and max values after PC configuration properly
Fri, 17 Oct 2014 13:31:14 +0200 heinrichsweikamp BUGFIX: Quit Apnea mode on the surface manually
Thu, 16 Oct 2014 13:11:18 +0200 heinrichsweikamp BUGFIX: O2 > 99% was not configurable from the PC
Thu, 09 Oct 2014 11:18:56 +0200 heinrichsweikamp BUGFIX: END/EAD updated when adjusting current gas during the dive
Tue, 07 Oct 2014 13:45:21 +0200 heinrichsweikamp BUGFIX: Average depth computation
Mon, 06 Oct 2014 11:48:23 +0200 heinrichsweikamp CHANGE: Draw a frame around the dive mode menu
Sun, 05 Oct 2014 15:36:17 +0200 heinrichsweikamp CHANGE: Clarify Travel Gases with "---" as change depth
Wed, 01 Oct 2014 10:31:53 +0200 heinrichsweikamp minor
Tue, 30 Sep 2014 10:35:47 +0200 heinrichsweikamp CHANGE: Compass readout smoothed
Mon, 29 Sep 2014 22:26:47 +0200 heinrichsweikamp CHANGE: Improve internal logbook usability
Mon, 29 Sep 2014 12:03:26 +0200 heinrichsweikamp BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook
Sun, 28 Sep 2014 18:44:07 +0200 heinrichsweikamp BUGFIX: Flip compass with flipped screen, too
Wed, 10 Sep 2014 16:13:16 +0200 heinrichsweikamp 1.52 beta release - 1.53 beta start
Tue, 09 Sep 2014 21:17:25 +0200 heinrichsweikamp NEW: Safe tissue data, date and time during firmware update
Mon, 08 Sep 2014 13:07:22 +0200 heinrichsweikamp 1.51 beta release - 1.52 beta start
Thu, 28 Aug 2014 12:13:52 +0200 heinrichsweikamp CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
Wed, 27 Aug 2014 17:38:21 +0200 heinrichsweikamp NEW: Show ppO2 for change depth during gas setup
Thu, 21 Aug 2014 10:30:52 +0200 heinrichsweikamp minor
Thu, 21 Aug 2014 10:19:03 +0200 heinrichsweikamp BUGFIX: Clear Setpoint-Fallback warning when in bailout
Mon, 11 Aug 2014 11:32:44 +0200 heinrichsweikamp 1.50 stable release
Tue, 05 Aug 2014 16:55:09 +0200 heinrichsweikamp NEW: Setpoint-Fallback option for external O2 sensor failure
Mon, 04 Aug 2014 12:10:35 +0200 heinrichsweikamp 1.45 beta release
Thu, 31 Jul 2014 11:40:48 +0200 heinrichsweikamp New changelog.txt format
Thu, 17 Jul 2014 14:24:51 +0200 heinrichsweikamp Simplify gas change
Tue, 15 Jul 2014 10:20:37 +0200 heinrichsweikamp Show clock in Apnea mode, minor layout changes in Apnea mode
Mon, 14 Jul 2014 15:17:07 +0200 heinrichsweikamp BUGFIX: Surface interval was not displayed correctly in some cases
Tue, 08 Jul 2014 11:39:00 +0200 heinrichsweikamp Bugfix: Start dive mode simulator in correct depth
Fri, 04 Jul 2014 12:51:20 +0200 heinrichsweikamp NEW: Update warnings every second
Thu, 03 Jul 2014 19:34:41 +0200 heinrichsweikamp no safety stop during menu display
Tue, 01 Jul 2014 14:48:17 +0200 heinrichsweikamp 1.41beta release
Sun, 29 Jun 2014 13:40:59 +0200 heinrichsweikamp add ceiling display
Fri, 27 Jun 2014 10:44:06 +0200 heinrichsweikamp Do not show "GF info" for non-GF modes
Fri, 27 Jun 2014 10:18:41 +0200 heinrichsweikamp show heading with leading zeros
Mon, 23 Jun 2014 16:14:33 +0200 heinrichsweikamp Merge
Tue, 17 Jun 2014 12:00:20 +0200 heinrichsweikamp Bugfix: CNS in planner
Tue, 10 Jun 2014 10:14:18 +0200 heinrichsweikamp BUGFIX: OSTC settings via USB issues
Thu, 05 Jun 2014 11:53:00 +0200 heinrichsweikamp BUGFIX: wrong ppo2 recording parameter in short header
Tue, 03 Jun 2014 13:20:05 +0200 heinrichsweikamp Show HUD voltages only in CCR mode...
Tue, 03 Jun 2014 12:25:47 +0200 heinrichsweikamp Show a Safety Stop if enabled (Menu "Deco Parameters")
Mon, 02 Jun 2014 12:54:12 +0200 heinrichsweikamp Minor language updates
Wed, 07 May 2014 14:57:58 +0200 heinrichsweikamp NEW: Show End-of-Dive time together with clock during deco
Fri, 02 May 2014 19:38:14 +0200 heinrichsweikamp 1.30 release
Fri, 02 May 2014 14:13:35 +0200 heinrichsweikamp show event "bailout" in the internal logbook
Mon, 28 Apr 2014 16:26:31 +0200 heinrichsweikamp CHANGE: Always compute bailout plan based on all active gases
Mon, 28 Apr 2014 10:17:18 +0200 heinrichsweikamp BUGFIX: Show "*" always in front of the initial Setpoint 1
Tue, 22 Apr 2014 12:59:14 +0200 heinrichsweikamp BUGFIX: compass calibration does now timeout automatically after 60s
Wed, 16 Apr 2014 22:31:09 +0200 heinrichsweikamp add sensor calibration option (PC only), some cleanup
Tue, 15 Apr 2014 14:40:49 +0200 heinrichsweikamp NEW: automatic compass gain makes calibration quicker
Tue, 15 Apr 2014 12:16:28 +0200 heinrichsweikamp BUGFIX: No average depth for end-of-dive portion (<1m)
Wed, 02 Apr 2014 10:25:24 +0200 heinrichsweikamp CHANGE: Color schemes improved
Wed, 26 Feb 2014 11:58:03 +0100 mh BUGFIX: Reset Logbook did not reset Logbook TOC properly
Thu, 20 Feb 2014 10:12:45 +0100 heinrichsweikamp BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
Wed, 19 Feb 2014 14:46:26 +0100 heinrichsweikamp 1.21 release
Tue, 11 Feb 2014 13:02:11 +0100 heinrichsweikamp change log
Sun, 02 Feb 2014 20:19:53 +0100 heinrichsweikamp +CHANGE: Some French Translations
Sat, 01 Feb 2014 15:31:30 +0100 heinrichsweikamp BUGFIX: Set Day for months <31 days
Sat, 11 Jan 2014 18:03:04 +0100 heinrichsweikamp BUGFIX: Maintain last selected customview in surface mode
Fri, 10 Jan 2014 10:18:16 +0100 heinrichsweikamp change log
Fri, 10 Jan 2014 10:11:43 +0100 heinrichsweikamp show battery voltage in info menu
Tue, 03 Dec 2013 15:10:02 +0100 heinrichsweikamp BUGFIX: Display Desat.-Time >100 hours
Sun, 01 Dec 2013 09:08:31 +0100 heinrichsweikamp Backlight level in eco mode
Mon, 30 Sep 2013 01:00:07 +0200 heinrichsweikamp Change "O2" warning to "ppO2"
Sun, 29 Sep 2013 19:10:12 +0200 heinrichsweikamp some cleanup/changelog
Fri, 27 Sep 2013 23:45:57 +0200 heinrichsweikamp NEW: user-selectable color schemes
Mon, 23 Sep 2013 20:47:18 +0200 heinrichsweikamp Time and Date in normal (Not tiny) font
Wed, 04 Sep 2013 12:39:40 +0200 heinrichsweikamp 1.02 beta start
Wed, 28 Aug 2013 15:44:11 +0200 heinrichsweikamp BUGFIX: Percent display with 1,5V batteries
Thu, 15 Aug 2013 15:37:34 +0200 mh Surface customview with important deco settings
Thu, 15 Aug 2013 14:34:50 +0200 mh Bugfix: Simulator in CC mode
Sun, 04 Aug 2013 18:13:18 +0200 heinrichsweikamp changelog
Mon, 22 Jul 2013 14:26:04 +0200 heinrichsweikamp GF high lowest setting 60%
Sun, 21 Jul 2013 18:04:29 +0200 heinrichsweikamp BUGFIX: alternating brightness at very low ambient light
Sat, 20 Jul 2013 22:01:49 +0200 heinrichsweikamp adding cardinal (and ordinal) directions for the compass
Tue, 09 Jul 2013 12:09:21 +0200 heinrichsweikamp 0.97 release
Tue, 09 Jul 2013 11:33:18 +0200 heinrichsweikamp fix imperial units in logbook
Wed, 03 Jul 2013 11:51:46 +0200 heinrichsweikamp changelog
Mon, 24 Jun 2013 12:25:01 +0200 heinrichsweikamp 0.96 release
Tue, 11 Jun 2013 09:42:59 +0200 heinrichsweikamp Show "MOD:" instead of "EAD:" in gas setup
Sun, 26 May 2013 10:24:50 +0200 heinrichsweikamp Show Max. Depth with 0.1m precision
Wed, 15 May 2013 11:57:44 +0200 heinrichsweikamp Timeout in decoplanner result page
Fri, 10 May 2013 14:33:28 +0200 heinrichsweikamp add changelog