| Mon, 05 Feb 2018 17:59:55 +0100 |
heinrichsweikamp |
bring digital S8 HUD back to life...
|
| Wed, 31 Jan 2018 19:39:37 +0100 |
heinrichsweikamp |
bump to 2.96beta (REFACTORED VERSION)
|
| Sun, 19 Nov 2017 18:43:27 +0100 |
heinrichsweikamp |
Display dezimal for temperatures between 10 and 0?C
|
| Sun, 19 Nov 2017 17:22:11 +0100 |
heinrichsweikamp |
BUGFIX: Display of negative (?C) water temperatures
|
| Mon, 16 Oct 2017 14:40:43 +0200 |
heinrichsweikamp |
Clear win_invert flag for all calls of TFT_cat_firmware
|
| Wed, 06 Sep 2017 21:26:18 +0200 |
heinrichsweikamp |
BUGFIX: Simulator in CC mode
|
| Wed, 06 Sep 2017 15:34:49 +0200 |
heinrichsweikamp |
NEW: Show Compass calibration results in Compass menu
|
| Tue, 22 Aug 2017 13:23:52 +0200 |
heinrichsweikamp |
NEW: Show a warning for each sensor if the sensor is end-of-life after calibration (Less then 8mV in Air at sea level)
|
| Mon, 21 Aug 2017 14:55:36 +0200 |
heinrichsweikamp |
CHANGE: CCR Calibration gas range limited to O2% 21-25 and 95-100 to save button presses
|
| Thu, 17 Aug 2017 13:20:03 +0200 |
heinrichsweikamp |
2.20beta release
|
| Sat, 05 Aug 2017 16:50:28 +0200 |
heinrichsweikamp |
BUGFIX: Skip MOD Test for CCR in Sensor modes (OSTC cR and OSTC3 only)
|
| Thu, 03 Aug 2017 17:03:05 +0200 |
heinrichsweikamp |
CHANGE: Show actual GF (Not relative) in custom views in dive mode
|
| Thu, 03 Aug 2017 16:59:31 +0200 |
heinrichsweikamp |
NEW: ppO2 blinks in sensor mode when min/max boundaries are hit
|
| Tue, 27 Jun 2017 13:50:42 +0200 |
heinrichsweikamp |
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
|
| Sat, 24 Jun 2017 19:26:06 +0200 |
heinrichsweikamp |
minor
|
| Sun, 11 Jun 2017 17:11:40 +0200 |
heinrichsweikamp |
NEW: Last Dive customviews in surface mode with divetime, depth and interval
|
| Wed, 29 Mar 2017 21:35:12 +0200 |
heinrichsweikamp |
NEW: Deep Sleep mode for OSTC Plus and OSTC 2 (2017) (Entered automatically)
|
| Mon, 13 Mar 2017 15:34:09 +0100 |
heinrichsweikamp |
minor
|
| Mon, 20 Feb 2017 15:49:38 +0100 |
heinrichsweikamp |
3.14 BETA release
|
| Tue, 07 Feb 2017 12:15:12 +0100 |
heinrichsweikamp |
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
|
| Mon, 06 Feb 2017 16:26:36 +0100 |
heinrichsweikamp |
NEW: PSCR mode (Passive semi-closed rebreather)
|
| Mon, 16 Jan 2017 11:59:55 +0100 |
heinrichsweikamp |
NEW: Show battery type in surface mode next to battery voltage
|
| Fri, 13 Jan 2017 13:08:17 +0100 |
heinrichsweikamp |
2.12 release candidate...
|
| Wed, 04 Jan 2017 15:04:42 +0100 |
heinrichsweikamp |
Fix new battery menu on Power-on reset
|
| Sun, 18 Dec 2016 18:20:39 +0100 |
heinrichsweikamp |
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
|
| Sun, 11 Dec 2016 14:43:56 +0100 |
heinrichsweikamp |
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
|
| Sat, 19 Nov 2016 18:37:47 +0100 |
heinrichsweikamp |
battery gauge handling
|
| Fri, 18 Nov 2016 10:49:32 +0100 |
heinrichsweikamp |
BUGFIX: Minor layout corrections in imperial units dive screen
|
| Wed, 28 Sep 2016 12:04:12 +0200 |
heinrichsweikamp |
show language version in information menu
|
| Tue, 27 Sep 2016 16:03:31 +0200 |
heinrichsweikamp |
minor: fix some alignments for OSTC cR
|
| Mon, 19 Sep 2016 16:32:02 +0200 |
heinrichsweikamp |
NEW: Show Uptime (Time since last firmware boot) in information menu
|
| Wed, 17 Aug 2016 09:50:37 +0200 |
heinrichsweikamp |
Adjustable timeout for Divemode (Config 0x48)
|
| Thu, 30 Jun 2016 10:28:12 +0200 |
heinrichsweikamp |
CHANGE: Language fixes, 2.08 release
|
| Wed, 22 Jun 2016 12:36:15 +0200 |
heinrichsweikamp |
hunting a bug in the logbook (Day 2)
|
| Tue, 21 Jun 2016 17:20:44 +0200 |
heinrichsweikamp |
hunting a bug in the logbook...
|
| Thu, 16 Jun 2016 13:21:46 +0200 |
heinrichsweikamp |
hardware_flag handling
|
| Wed, 15 Jun 2016 12:26:48 +0200 |
heinrichsweikamp |
some cleanup
|
| Tue, 22 Mar 2016 16:39:00 +0100 |
heinrichsweikamp |
NEW: New Customview shows ppO2(O2) and ppO2(Diluent) during CCR mode
|
| Tue, 15 Mar 2016 12:19:12 +0100 |
heinrichsweikamp |
2.04beta start
|
| Tue, 02 Feb 2016 11:09:14 +0100 |
heinrichsweikamp |
2.01 release
|
| Mon, 01 Feb 2016 20:44:01 +0100 |
heinrichsweikamp |
BUGFIX: Divetime >99mins was not displayed (Only OSTC2 with serial >= )
|
| Tue, 24 Nov 2015 16:22:52 +0100 |
heinrichsweikamp |
CHANGE: New segmented speed graph in divemode
|
| Mon, 23 Nov 2015 16:13:25 +0100 |
heinrichsweikamp |
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
|
| Fri, 06 Nov 2015 11:48:40 +0100 |
heinrichsweikamp |
BUGFIX: minor text allignment in CCR mode
|
| Wed, 07 Oct 2015 14:46:39 +0200 |
heinrichsweikamp |
some cleanups, jump to 1.90 stable
|
| Tue, 18 Aug 2015 17:39:07 +0200 |
heinrichsweikamp |
fixing some layout issues
|
| Tue, 28 Jul 2015 16:32:55 +0200 |
heinrichsweikamp |
NEW: Quit Simulator automatically when starting a real dive
|
| Mon, 06 Jul 2015 12:50:49 +0200 |
heinrichsweikamp |
Show ppo2 <1bar with leading zero
|
| Fri, 03 Jul 2015 15:08:15 +0200 |
heinrichsweikamp |
minor: fix calc_deko_divemode_sensor
|
| Sun, 28 Jun 2015 13:58:00 +0200 |
heinrichsweikamp |
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
|
| Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Extend the Ceiling custom-view with ppO2 and current GF
new_screen_layout
|
| Sun, 28 Jun 2015 03:30:03 +0200 |
Janos Kovacs |
Fix positions if no VSI Bar displayed
new_screen_layout
|
| Sun, 14 Jun 2015 11:06:20 +0200 |
janos_kovacs |
Fix: missing attention coloring for standard (static) ascend rate limit
new_screen_layout
|
| Sat, 13 Jun 2015 22:53:05 +0200 |
Janos Kovacs |
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix
new_screen_layout
|
| Thu, 11 Jun 2015 17:02:09 +0100 |
janos_kovacs |
VSIbar #3f: roll back debug color
new_screen_layout
|
| Thu, 11 Jun 2015 16:07:29 +0100 |
janos_kovacs |
VSIbar #3e: additional filter on zero ascend rate
new_screen_layout
|
| Thu, 11 Jun 2015 15:16:42 +0100 |
janos_kovacs |
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
new_screen_layout
|
| Thu, 11 Jun 2015 13:40:14 +0100 |
janos_kovacs |
VSIbar #3c: extra steps to keep calculation clear
new_screen_layout
|
| Wed, 10 Jun 2015 22:47:38 +0100 |
janos_kovacs |
VSIbar #3b: small fix on the bar's width
new_screen_layout
|
| Wed, 10 Jun 2015 22:32:38 +0100 |
Janos Kovacs |
VSIbar #3: remaining changes for the split style bar
new_screen_layout
|
| Mon, 08 Jun 2015 01:36:05 +0200 |
janos_kovacs |
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m
new_screen_layout
|
| Sun, 07 Jun 2015 22:07:55 +0200 |
janos_kovacs |
VSIbar #1: layout position changes
new_screen_layout
|
| Tue, 02 Jun 2015 23:38:21 +0100 |
Janos Kovacs |
Merged Screen layout work #4 into VSItextv2
new_screen_layout
|
| Mon, 01 Jun 2015 15:21:25 +0200 |
janos_kovacs |
Add configuration option to control depth warning blinking
new_screen_layout
|
| Sun, 31 May 2015 21:24:16 +0200 |
Janos Kovacs |
Merged Screen layout mod #1 into Screen layout work #3
|
| Thu, 07 May 2015 13:11:14 +0200 |
heinrichsweikamp |
rename into hwOS
|
| Thu, 26 Mar 2015 11:37:37 +0100 |
heinrichsweikamp |
bugfix dynamic gas list
|
| Tue, 24 Mar 2015 19:48:17 +0100 |
heinrichsweikamp |
increase immunity against false Qi data
|
| Mon, 23 Mar 2015 18:02:40 +0100 |
heinrichsweikamp |
place compass display code into compass_ops.asm
|
| Mon, 23 Mar 2015 17:07:57 +0100 |
heinrichsweikamp |
add bearing option to compass
|
| Thu, 19 Mar 2015 12:28:23 +0100 |
heinrichsweikamp |
change warning sign
|
| Wed, 18 Mar 2015 17:39:27 +0100 |
heinrichsweikamp |
some cleanup, temporaly disable dive_warning.inc
|
| Wed, 18 Mar 2015 16:42:49 +0100 |
heinrichsweikamp |
Graphical compass from kovacs
|
| Tue, 17 Mar 2015 12:16:15 +0100 |
heinrichsweikamp |
ignore sensor for non-sensor hardware
|
| Mon, 16 Mar 2015 15:58:51 +0100 |
heinrichsweikamp |
support hardware_flag for all possible hardware combinations
|
| Fri, 13 Mar 2015 10:49:43 +0100 |
heinrichsweikamp |
BUGFIX: Always update CCR sensor data in Sensor-Menu
|
| Sun, 01 Mar 2015 21:10:14 +0100 |
heinrichsweikamp |
CNANGE: aGF pair has same range then normal GF pair
|
| Wed, 25 Feb 2015 22:19:30 +0100 |
heinrichsweikamp |
configure hardware_flag byte
|
| Wed, 25 Feb 2015 16:49:59 +0100 |
heinrichsweikamp |
under construction: new hardware_flag to configure different hardware versions
|
| Wed, 25 Feb 2015 13:57:30 +0100 |
heinrichsweikamp |
Show OSTC2-like active gas boxes in surface mode
|
| Sat, 21 Feb 2015 20:05:57 +0100 |
mh |
BUGFIX: Show average depth with one decimal digit only
|
| Wed, 18 Feb 2015 23:07:04 +0100 |
mh |
minor cleanup
|
| Mon, 02 Feb 2015 17:39:38 +0100 |
heinrichsweikamp |
NEW: Support for hwHUD without the LED module
|
| Sun, 01 Feb 2015 18:49:24 +0100 |
heinrichsweikamp |
BUGFIX: Show dives with >999mins divetime correctly
|
| Mon, 05 Jan 2015 14:41:23 +0100 |
heinrichsweikamp |
make button sensitivity configurable (cR hardware)
|
| Sun, 14 Dec 2014 13:56:05 +0100 |
heinrichsweikamp |
compass changes
|
| Sat, 13 Dec 2014 11:18:56 +0100 |
heinrichsweikamp |
layout changes
|
| Sat, 06 Dec 2014 21:04:27 +0100 |
heinrichsweikamp |
charge indicator on surface screen
|
| Wed, 26 Nov 2014 14:30:25 +0100 |
heinrichsweikamp |
Preparations for 1.7
|
| Fri, 21 Nov 2014 11:51:53 +0100 |
heinrichsweikamp |
1.64 (Fix ambient light for cR)
|
| Wed, 12 Nov 2014 19:33:15 +0100 |
heinrichsweikamp |
cleanup
|
| Mon, 03 Nov 2014 17:25:19 +0100 |
heinrichsweikamp |
voting logic for external monitoring
|
| Thu, 30 Oct 2014 17:45:50 +0100 |
heinrichsweikamp |
minor
|
| Wed, 29 Oct 2014 12:53:01 +0100 |
heinrichsweikamp |
ignore un-calibrated sensors even if they become valid
|
| Mon, 27 Oct 2014 11:28:48 +0100 |
heinrichsweikamp |
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
|
| Sat, 25 Oct 2014 15:28:18 +0200 |
heinrichsweikamp |
CHANGE: Longer timeout (4 min) for calibration menu
|
| Wed, 08 Oct 2014 17:57:37 +0200 |
heinrichsweikamp |
1.60 work...
|
| Mon, 06 Oct 2014 11:48:23 +0200 |
heinrichsweikamp |
CHANGE: Draw a frame around the dive mode menu
|
| Tue, 30 Sep 2014 10:35:47 +0200 |
heinrichsweikamp |
CHANGE: Compass readout smoothed
|
| Wed, 27 Aug 2014 17:38:21 +0200 |
heinrichsweikamp |
NEW: Show ppO2 for change depth during gas setup
|
| Thu, 21 Aug 2014 10:30:52 +0200 |
heinrichsweikamp |
minor
|
| Mon, 18 Aug 2014 17:37:00 +0200 |
heinrichsweikamp |
work on flip screen...
|
| Wed, 06 Aug 2014 11:59:04 +0200 |
heinrichsweikamp |
some cleanup
|
| Tue, 05 Aug 2014 16:55:09 +0200 |
heinrichsweikamp |
NEW: Setpoint-Fallback option for external O2 sensor failure
|
| Thu, 17 Jul 2014 17:56:09 +0200 |
heinrichsweikamp |
some cleanup
|
| Tue, 15 Jul 2014 10:20:37 +0200 |
heinrichsweikamp |
Show clock in Apnea mode, minor layout changes in Apnea mode
|
| Fri, 04 Jul 2014 12:51:20 +0200 |
heinrichsweikamp |
NEW: Update warnings every second
|
| Thu, 03 Jul 2014 19:34:41 +0200 |
heinrichsweikamp |
no safety stop during menu display
|
| Mon, 30 Jun 2014 10:58:02 +0200 |
heinrichsweikamp |
fix depth<0m display, ceiling
|
| Sun, 29 Jun 2014 13:53:46 +0200 |
heinrichsweikamp |
cleanup
|
| Sun, 29 Jun 2014 13:40:59 +0200 |
heinrichsweikamp |
add ceiling display
|
| Fri, 27 Jun 2014 16:55:49 +0200 |
heinrichsweikamp |
Show %'s for non-GF deco model in surface mode
|
