log src/menu_tree.asm @ 572:0039f057b90f

age author description
2018-02-03 heinrichsweikamp seperate desat and sat multipliers for GF and Non-GF modes. Set to 100/100 as default in GF mode
2018-01-31 heinrichsweikamp bump to 2.96beta (REFACTORED VERSION)
2017-09-06 heinrichsweikamp BUGFIX: Simulator in CC mode
2017-09-06 heinrichsweikamp NEW: Show Compass calibration results in Compass menu
2017-08-17 heinrichsweikamp 2.20beta release
2017-08-07 heinrichsweikamp minor
2017-08-05 heinrichsweikamp menu work
2017-08-04 heinrichsweikamp BUGFIX: Menu tree cleaned up (Exited to CCR menu from simulator settings)
2017-06-27 heinrichsweikamp NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
2017-06-26 heinrichsweikamp BUGFIX: Reset to MOD in Diluent Menu did reset Setpoint change depth
2017-06-09 heinrichsweikamp BUGFIX: PSCR mode showed bailout gaslist instead of diluent gaslist
2017-02-06 heinrichsweikamp cleanup pscr menu
2017-02-06 heinrichsweikamp NEW: PSCR mode (Passive semi-closed rebreather)
2017-01-16 heinrichsweikamp NEW: Show battery type in surface mode next to battery voltage
2017-01-04 heinrichsweikamp Fix new battery menu on Power-on reset
2016-12-18 heinrichsweikamp CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
2016-12-06 heinrichsweikamp minor: clear screen while resetting settings
2016-11-02 heinrichsweikamp CHANGE: Easier to understand "New Battery" menu (OSTC model dependent)
2016-09-28 heinrichsweikamp recover old battery status prior 2.09
2016-09-19 heinrichsweikamp NEW: Show Uptime (Time since last firmware boot) in information menu
2016-09-01 heinrichsweikamp speedup analog presses
2016-08-31 heinrichsweikamp bugfix "old battery" type
2016-08-30 heinrichsweikamp work on new battery options
2016-06-15 heinrichsweikamp some cleanup
2015-11-23 heinrichsweikamp place total dives backup counter in eeprom 16:17
2015-08-27 heinrichsweikamp 1.88 release, BUGFIX: Start with Sensor use from sleep (cR only), CHANGE: Apply button settings when button menu is closed, NEW: Reset button settings on a magnet reset (cR and OSTC 2)
2015-08-03 heinrichsweikamp make AUTO SP available on OSTC2 hardware
2015-07-31 heinrichsweikamp hud v3 support
2015-07-20 heinrichsweikamp re-arrange settings menu
2015-06-28 heinrichsweikamp cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
2015-06-28 janos_kovacs Always show ppO2 (warning position, standard color) option new_screen_layout
2015-06-28 Janos Kovacs Extend the Ceiling custom-view with ppO2 and current GF new_screen_layout
2015-06-13 Janos Kovacs VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix new_screen_layout
2015-06-02 Janos Kovacs Merged Screen layout work #4 into VSItextv2 new_screen_layout
2015-06-02 heinrichsweikamp rename tMODwarning
2015-06-01 janos_kovacs Add configuration option to control depth warning blinking new_screen_layout
2015-05-31 heinrichsweikamp new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
2015-05-07 heinrichsweikamp rename into hwOS
2015-04-20 heinrichsweikamp adjust menu for different hardware versions
2015-03-04 heinrichsweikamp auto-select correct settings menu
2015-03-02 heinrichsweikamp auto-select correct ccr menu
2015-02-25 heinrichsweikamp configure hardware_flag byte
2015-02-25 heinrichsweikamp under construction: new hardware_flag to configure different hardware versions
2015-01-05 heinrichsweikamp make button sensitivity configurable (cR hardware)
2014-12-19 heinrichsweikamp 1.71beta start
2014-11-12 heinrichsweikamp cleanup
2014-10-25 heinrichsweikamp CHANGE: Longer timeout (4 min) for calibration menu
2014-10-05 heinrichsweikamp CHANGE: Clarify Travel Gases with "---" as change depth
2014-08-28 heinrichsweikamp CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
2014-08-27 heinrichsweikamp NEW: Show ppO2 for change depth during gas setup
2014-08-06 heinrichsweikamp some cleanup
2014-08-05 heinrichsweikamp NEW: Setpoint-Fallback option for external O2 sensor failure
2014-08-04 heinrichsweikamp 1.45 beta release
2014-07-17 heinrichsweikamp some cleanup
2014-06-23 heinrichsweikamp Merge
2014-06-03 heinrichsweikamp Show a Safety Stop if enabled (Menu "Deco Parameters")
2014-04-15 heinrichsweikamp NEW: automatic compass gain makes calibration quicker
2014-02-26 mh BUGFIX: Reset Logbook did not reset Logbook TOC properly
2014-02-19 heinrichsweikamp 1.21 release
2014-01-11 heinrichsweikamp BUGFIX: Maintain last selected customview in surface mode
2014-01-10 heinrichsweikamp Merge
2013-12-19 heinrichsweikamp allow logbook erase from reset menu
2014-01-10 heinrichsweikamp show battery voltage in info menu
2013-09-27 heinrichsweikamp NEW: user-selectable color schemes
2013-08-15 mh remember last customview in dive and surface mode
2013-07-08 heinrichsweikamp new option to switch samplingrate between 10s and 2s
2013-07-03 heinrichsweikamp add new opt_compass_gain option to work with more magnetic battery types
2013-04-24 heinrichsweikamp init