Mercurial > public > hwos_code
graph
-
ADD tGasUsage, with FR translation (and DE,IT defaults)Sat, 30 May 2015 21:33:04 +0200, by jDG
-
NEW gas_volume unit test in CCR mode. Works too.Fri, 29 May 2015 02:50:12 +0200, by jdg
-
[mq]: 2015-05-29_02-40-44_r288+.diffFri, 29 May 2015 02:46:44 +0200, by jdg
-
FIX gas_volume shall read gas switches from char_O_deco_gasFri, 29 May 2015 02:40:43 +0200, by jdg
-
FIX gas_volumes: shall take stops in forward order.Fri, 29 May 2015 02:24:03 +0200, by jdg
-
NEW test w/o stops and with stopsFri, 29 May 2015 02:07:28 +0200, by jdg
-
NEW unit tests for gas volumes...Fri, 29 May 2015 01:25:45 +0200, by jdg
-
preperations to compute gas consumtion in simulatorThu, 28 May 2015 09:56:15 +0200, by heinrichsweikamp
-
1.82beta with new compass calib codeWed, 27 May 2015 10:57:29 +0200, by heinrichsweikamp
-
Make a more compact COMPASS calibration code (<7KB), and add more tests.Fri, 22 May 2015 14:50:40 +0200, by jDG
-
BUGFIX: Fix download issue for dives made with 1.80 firmwareTue, 26 May 2015 17:40:13 +0200, by heinrichsweikamp
-
doku updateTue, 26 May 2015 13:24:26 +0200, by heinrichsweikamp
-
bugfix wrong profile length in headerTue, 26 May 2015 12:38:17 +0200, by heinrichsweikamp
-
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issuesMon, 18 May 2015 21:25:56 +0200, by heinrichsweikamp
-
1.79beta - update internal sensor registers during bootMon, 18 May 2015 14:24:50 +0200, by heinrichsweikamp
-
Increase byte timeout in PC download mode, faster response to "Exit" in main menuTue, 12 May 2015 14:24:46 +0200, by heinrichsweikamp
-
rename into hwOSThu, 07 May 2015 13:11:14 +0200, by heinrichsweikamp
-
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0Tue, 05 May 2015 14:58:16 +0200, by heinrichsweikamp
-
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)Mon, 04 May 2015 12:56:07 +0200, by heinrichsweikamp
-
1.78 releaseWed, 29 Apr 2015 16:54:58 +0200, by heinrichsweikamp
-
Update digital ppO2 data automaticallyTue, 28 Apr 2015 16:39:28 +0200, by heinrichsweikamp
-
increase min input voltage from 1,2mV to 1,9mV (cR only)Wed, 22 Apr 2015 16:03:31 +0200, by heinrichsweikamp
-
adjust menu for different hardware versionsMon, 20 Apr 2015 11:18:30 +0200, by heinrichsweikamp
-
BUGFIX: Increase timing tolerance for S8 HUD (cR only)Sun, 19 Apr 2015 20:41:48 +0200, by heinrichsweikamp
-
BUGFIX: Analog sensors were ignored in 1.76Thu, 16 Apr 2015 11:30:00 +0200, by heinrichsweikamp
-
Charge done indicator (cR and 2 Hardware)Tue, 14 Apr 2015 16:16:14 +0200, by heinrichsweikamp
-
1.76 releaseMon, 30 Mar 2015 14:59:07 +0200, by heinrichsweikamp
-
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.Thu, 26 Mar 2015 14:21:42 +0100, by janos_kovacs
-
show unit8 options in menu left-alignedThu, 26 Mar 2015 13:50:02 +0100, by heinrichsweikamp
-
bugfix dynamic gas listThu, 26 Mar 2015 11:37:37 +0100, by heinrichsweikamp
-
language updateWed, 25 Mar 2015 18:07:46 +0100, by heinrichsweikamp
-
increase immunity against false Qi dataTue, 24 Mar 2015 19:48:17 +0100, by heinrichsweikamp
-
minor cleanupMon, 23 Mar 2015 19:58:19 +0100, by heinrichsweikamp
-
patch for bearing issueMon, 23 Mar 2015 19:41:27 +0100, by heinrichsweikamp
-
minor speed and size improvements for the compass routineMon, 23 Mar 2015 18:40:58 +0100, by heinrichsweikamp
-
place compass display code into compass_ops.asmMon, 23 Mar 2015 18:02:40 +0100, by heinrichsweikamp
-
add bearing option to compassMon, 23 Mar 2015 17:07:57 +0100, by heinrichsweikamp
-
preparations to set a course for the compass displayFri, 20 Mar 2015 10:16:49 +0100, by heinrichsweikamp
-
another icon updateThu, 19 Mar 2015 13:50:06 +0100, by heinrichsweikamp
-
change warning signThu, 19 Mar 2015 12:28:23 +0100, by heinrichsweikamp
-
some cleanup, temporaly disable dive_warning.incWed, 18 Mar 2015 17:39:27 +0100, by heinrichsweikamp
-
Graphical compass from kovacsWed, 18 Mar 2015 16:42:49 +0100, by heinrichsweikamp
-
ignore sensor for non-sensor hardwareTue, 17 Mar 2015 12:16:15 +0100, by heinrichsweikamp
-
support hardware_flag for all possible hardware combinationsMon, 16 Mar 2015 15:58:51 +0100, by heinrichsweikamp
-
BUGFIX: Always update CCR sensor data in Sensor-MenuFri, 13 Mar 2015 10:49:43 +0100, by heinrichsweikamp
-
minor docu updateThu, 05 Mar 2015 10:36:56 +0100, by heinrichsweikamp
-
use single-byte hardware flag (again)Wed, 04 Mar 2015 19:01:57 +0100, by heinrichsweikamp
-
minor docu update (removed typo)Wed, 04 Mar 2015 16:26:48 +0100, by heinrichsweikamp
-
auto-select correct settings menuWed, 04 Mar 2015 16:25:44 +0100, by heinrichsweikamp
-
expand hardware_flag to 4 bytesTue, 03 Mar 2015 12:09:24 +0100, by heinrichsweikamp
-
docu updateMon, 02 Mar 2015 17:05:09 +0100, by heinrichsweikamp
-
auto-select correct ccr menuMon, 02 Mar 2015 10:54:00 +0100, by heinrichsweikamp
-
CNANGE: aGF pair has same range then normal GF pairSun, 01 Mar 2015 21:10:14 +0100, by heinrichsweikamp
-
cleanupSun, 01 Mar 2015 13:06:17 +0100, by heinrichsweikamp
-
1.75 releaseThu, 26 Feb 2015 13:13:23 +0100, by heinrichsweikamp
-
configure hardware_flag byteWed, 25 Feb 2015 22:19:30 +0100, by heinrichsweikamp
-
under construction: new hardware_flag to configure different hardware versionsWed, 25 Feb 2015 16:49:59 +0100, by heinrichsweikamp
-
Show OSTC2-like active gas boxes in surface modeWed, 25 Feb 2015 13:57:30 +0100, by heinrichsweikamp
-
show start gas in normal fontWed, 25 Feb 2015 11:51:50 +0100, by heinrichsweikamp
-
show start gas in OC mode permanentlySun, 22 Feb 2015 12:14:03 -0400, by mh
-
BUGFIX: Show average depth with one decimal digit onlySat, 21 Feb 2015 20:05:57 +0100, by mh
-
Bugfix: Check for divemode before checking for menuFri, 20 Feb 2015 00:15:22 +0100, by mh
-
minor cleanupWed, 18 Feb 2015 23:07:04 +0100, by mh
-
1.74 releaseThu, 05 Feb 2015 14:51:24 +0100, by heinrichsweikamp
-
NEW: Support for hwHUD without the LED moduleMon, 02 Feb 2015 17:39:38 +0100, by heinrichsweikamp
-
button config (cR)Mon, 02 Feb 2015 17:04:43 +0100, by heinrichsweikamp
-
BUGFIX: Show dives with >999mins divetime correctlySun, 01 Feb 2015 18:49:24 +0100, by heinrichsweikamp
-
temporally disable "Copy disable flags from digital input" routineThu, 29 Jan 2015 18:18:15 +0100, by heinrichsweikamp
-
PC config, 1.72 releaseWed, 14 Jan 2015 11:37:19 +0100, by heinrichsweikamp
-
check opt_max correctlyTue, 06 Jan 2015 19:24:58 +0100, by heinrichsweikamp
-
minor: configure buttons during splash screenMon, 05 Jan 2015 16:13:15 +0100, by heinrichsweikamp
-
make button sensitivity configurable (cR hardware)Mon, 05 Jan 2015 14:41:23 +0100, by heinrichsweikamp
-
init new 4kB Page in logbook memory when pointer is not valid.Sun, 04 Jan 2015 21:24:01 +0100, by heinrichsweikamp
-
1.71beta startFri, 19 Dec 2014 17:56:40 +0100, by heinrichsweikamp
-
1.7 releaseWed, 17 Dec 2014 14:46:45 +0100, by heinrichsweikamp
-
NEW: On-board simulator can increase divetime in 5min stepsMon, 15 Dec 2014 19:50:51 +0100, by heinrichsweikamp
-
ignore battery menu for crMon, 15 Dec 2014 12:50:23 +0100, by heinrichsweikamp
-
compass changesSun, 14 Dec 2014 13:56:05 +0100, by heinrichsweikamp
-
layout changesSat, 13 Dec 2014 11:18:56 +0100, by heinrichsweikamp
-
MergeWed, 10 Dec 2014 09:13:49 +0100, by heinrichsweikamp
-
minorWed, 10 Dec 2014 09:13:36 +0100, by heinrichsweikamp
-
do not clear char_O_deco_gas in copy_deco_tableSun, 07 Dec 2014 23:04:16 +0100, by heinrichsweikamp
-
cleanupSun, 07 Dec 2014 18:03:05 +0100, by heinrichsweikamp
-
NEW: Show plan parameters in decoplan result pageSun, 07 Dec 2014 12:47:19 +0100, by heinrichsweikamp
-
charge indicator on surface screenSat, 06 Dec 2014 21:04:27 +0100, by heinrichsweikamp
-
always reboot display in divemodeMon, 01 Dec 2014 17:06:53 +0100, by heinrichsweikamp
-
Preparations for 1.7Wed, 26 Nov 2014 14:30:25 +0100, by heinrichsweikamp
-
minorSun, 23 Nov 2014 22:33:41 +0100, by heinrichsweikamp
-
1.64 (Fix ambient light for cR)Fri, 21 Nov 2014 11:51:53 +0100, by heinrichsweikamp
-
1.63beta releaseFri, 21 Nov 2014 11:10:07 +0100, by heinrichsweikamp
-
lower minimum backlight in eco modeThu, 20 Nov 2014 20:32:36 +0100, by heinrichsweikamp
-
cleanupWed, 12 Nov 2014 19:33:15 +0100, by heinrichsweikamp
-
minorTue, 11 Nov 2014 16:55:39 +0100, by heinrichsweikamp
-
(Slightly) reduce current consumption in Eco and sleep modeMon, 10 Nov 2014 13:54:20 +0100, by heinrichsweikamp
-
cleanupThu, 06 Nov 2014 15:28:59 +0100, by heinrichsweikamp
-
suppress ghost readings for long, open cablesThu, 06 Nov 2014 12:00:44 +0100, by heinrichsweikamp
-
allow auto-return from setpoint fallbackWed, 05 Nov 2014 14:43:13 +0100, by heinrichsweikamp
-
1.62beta startTue, 04 Nov 2014 15:21:32 +0100, by heinrichsweikamp
-
reset voting logic on sensor switchMon, 03 Nov 2014 17:31:03 +0100, by heinrichsweikamp
-
voting logic for external monitoringMon, 03 Nov 2014 17:25:19 +0100, by heinrichsweikamp
-
minorThu, 30 Oct 2014 17:45:50 +0100, by heinrichsweikamp
-
limit sensor-read ppO2 to 2.55barWed, 29 Oct 2014 15:33:36 +0100, by heinrichsweikamp
-
ignore un-calibrated sensors even if they become validWed, 29 Oct 2014 12:53:01 +0100, by heinrichsweikamp
-
NEW: Show Bailout Gas List in Surface mode (CCR Modes)Mon, 27 Oct 2014 11:28:48 +0100, by heinrichsweikamp
-
CHANGE: Longer timeout (4 min) for calibration menuSat, 25 Oct 2014 15:28:18 +0200, by heinrichsweikamp
-
minorWed, 22 Oct 2014 18:09:01 +0200, by heinrichsweikamp
-
BUGFIX: Check min and max values after PC configuration properlySat, 18 Oct 2014 10:03:28 +0200, by heinrichsweikamp
-
BUGFIX: Quit Apnea mode on the surface manuallyFri, 17 Oct 2014 13:31:14 +0200, by heinrichsweikamp
-
BUGFIX: O2 > 99% was not configurable from the PCThu, 16 Oct 2014 13:11:18 +0200, by heinrichsweikamp
-
minor cleanupFri, 10 Oct 2014 11:13:54 +0200, by heinrichsweikamp
-
BUGFIX: END/EAD updated when adjusting current gas during the diveThu, 09 Oct 2014 11:18:56 +0200, by heinrichsweikamp
-
1.60 work...Wed, 08 Oct 2014 17:57:37 +0200, by heinrichsweikamp
-
1.54 beta startTue, 07 Oct 2014 14:21:46 +0200, by heinrichsweikamp
-
BUGFIX: Average depth computationTue, 07 Oct 2014 13:45:21 +0200, by heinrichsweikamp
-
MergeTue, 07 Oct 2014 08:42:38 +0200, by heinrichsweikamp
-
surface pressure copy in simulatorMon, 06 Oct 2014 23:47:08 +0200, by heinrichsweikamp
-
CHANGE: Draw a frame around the dive mode menuMon, 06 Oct 2014 11:48:23 +0200, by heinrichsweikamp
-
CHANGE: Clarify Travel Gases with "---" as change depthSun, 05 Oct 2014 15:36:17 +0200, by heinrichsweikamp
-
minorWed, 01 Oct 2014 10:31:53 +0200, by heinrichsweikamp
-
BUGFIX: Future TTS in sensor modeTue, 30 Sep 2014 19:19:53 +0200, by heinrichsweikamp