hwos_code: revision graph

graph

less more | rev 285: (0) -100 -60 +60 +100 +300 tip

NEW unit tests for gas volumes...
Fri, 29 May 2015 01:25:45 +0200, by jdg
preperations to compute gas consumtion in simulator
Thu, 28 May 2015 09:56:15 +0200, by heinrichsweikamp
1.82beta with new compass calib code
Wed, 27 May 2015 10:57:29 +0200, by heinrichsweikamp
Make a more compact COMPASS calibration code (<7KB), and add more tests.
Fri, 22 May 2015 14:50:40 +0200, by jDG
BUGFIX: Fix download issue for dives made with 1.80 firmware
Tue, 26 May 2015 17:40:13 +0200, by heinrichsweikamp
doku update
Tue, 26 May 2015 13:24:26 +0200, by heinrichsweikamp
bugfix wrong profile length in header
Tue, 26 May 2015 12:38:17 +0200, by heinrichsweikamp
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
Mon, 18 May 2015 21:25:56 +0200, by heinrichsweikamp
1.79beta - update internal sensor registers during boot
Mon, 18 May 2015 14:24:50 +0200, by heinrichsweikamp
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
Tue, 12 May 2015 14:24:46 +0200, by heinrichsweikamp
rename into hwOS
Thu, 07 May 2015 13:11:14 +0200, by heinrichsweikamp
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
Tue, 05 May 2015 14:58:16 +0200, by heinrichsweikamp
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
Mon, 04 May 2015 12:56:07 +0200, by heinrichsweikamp
1.78 release
Wed, 29 Apr 2015 16:54:58 +0200, by heinrichsweikamp
Update digital ppO2 data automatically
Tue, 28 Apr 2015 16:39:28 +0200, by heinrichsweikamp
increase min input voltage from 1,2mV to 1,9mV (cR only)
Wed, 22 Apr 2015 16:03:31 +0200, by heinrichsweikamp
adjust menu for different hardware versions
Mon, 20 Apr 2015 11:18:30 +0200, by heinrichsweikamp
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
Sun, 19 Apr 2015 20:41:48 +0200, by heinrichsweikamp
BUGFIX: Analog sensors were ignored in 1.76
Thu, 16 Apr 2015 11:30:00 +0200, by heinrichsweikamp
Charge done indicator (cR and 2 Hardware)
Tue, 14 Apr 2015 16:16:14 +0200, by heinrichsweikamp
1.76 release
Mon, 30 Mar 2015 14:59:07 +0200, by heinrichsweikamp
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.
Thu, 26 Mar 2015 14:21:42 +0100, by janos_kovacs
show unit8 options in menu left-aligned
Thu, 26 Mar 2015 13:50:02 +0100, by heinrichsweikamp
bugfix dynamic gas list
Thu, 26 Mar 2015 11:37:37 +0100, by heinrichsweikamp
language update
Wed, 25 Mar 2015 18:07:46 +0100, by heinrichsweikamp
increase immunity against false Qi data
Tue, 24 Mar 2015 19:48:17 +0100, by heinrichsweikamp
minor cleanup
Mon, 23 Mar 2015 19:58:19 +0100, by heinrichsweikamp
patch for bearing issue
Mon, 23 Mar 2015 19:41:27 +0100, by heinrichsweikamp
minor speed and size improvements for the compass routine
Mon, 23 Mar 2015 18:40:58 +0100, by heinrichsweikamp
place compass display code into compass_ops.asm
Mon, 23 Mar 2015 18:02:40 +0100, by heinrichsweikamp
add bearing option to compass
Mon, 23 Mar 2015 17:07:57 +0100, by heinrichsweikamp
preparations to set a course for the compass display
Fri, 20 Mar 2015 10:16:49 +0100, by heinrichsweikamp
another icon update
Thu, 19 Mar 2015 13:50:06 +0100, by heinrichsweikamp
change warning sign
Thu, 19 Mar 2015 12:28:23 +0100, by heinrichsweikamp
some cleanup, temporaly disable dive_warning.inc
Wed, 18 Mar 2015 17:39:27 +0100, by heinrichsweikamp
Graphical compass from kovacs
Wed, 18 Mar 2015 16:42:49 +0100, by heinrichsweikamp
ignore sensor for non-sensor hardware
Tue, 17 Mar 2015 12:16:15 +0100, by heinrichsweikamp
support hardware_flag for all possible hardware combinations
Mon, 16 Mar 2015 15:58:51 +0100, by heinrichsweikamp
BUGFIX: Always update CCR sensor data in Sensor-Menu
Fri, 13 Mar 2015 10:49:43 +0100, by heinrichsweikamp
minor docu update
Thu, 05 Mar 2015 10:36:56 +0100, by heinrichsweikamp
use single-byte hardware flag (again)
Wed, 04 Mar 2015 19:01:57 +0100, by heinrichsweikamp
minor docu update (removed typo)
Wed, 04 Mar 2015 16:26:48 +0100, by heinrichsweikamp
auto-select correct settings menu
Wed, 04 Mar 2015 16:25:44 +0100, by heinrichsweikamp
expand hardware_flag to 4 bytes
Tue, 03 Mar 2015 12:09:24 +0100, by heinrichsweikamp
docu update
Mon, 02 Mar 2015 17:05:09 +0100, by heinrichsweikamp
auto-select correct ccr menu
Mon, 02 Mar 2015 10:54:00 +0100, by heinrichsweikamp
CNANGE: aGF pair has same range then normal GF pair
Sun, 01 Mar 2015 21:10:14 +0100, by heinrichsweikamp
cleanup
Sun, 01 Mar 2015 13:06:17 +0100, by heinrichsweikamp
1.75 release
Thu, 26 Feb 2015 13:13:23 +0100, by heinrichsweikamp
configure hardware_flag byte
Wed, 25 Feb 2015 22:19:30 +0100, by heinrichsweikamp
under construction: new hardware_flag to configure different hardware versions
Wed, 25 Feb 2015 16:49:59 +0100, by heinrichsweikamp
Show OSTC2-like active gas boxes in surface mode
Wed, 25 Feb 2015 13:57:30 +0100, by heinrichsweikamp
show start gas in normal font
Wed, 25 Feb 2015 11:51:50 +0100, by heinrichsweikamp
show start gas in OC mode permanently
Sun, 22 Feb 2015 12:14:03 -0400, by mh
BUGFIX: Show average depth with one decimal digit only
Sat, 21 Feb 2015 20:05:57 +0100, by mh
Bugfix: Check for divemode before checking for menu
Fri, 20 Feb 2015 00:15:22 +0100, by mh
minor cleanup
Wed, 18 Feb 2015 23:07:04 +0100, by mh
1.74 release
Thu, 05 Feb 2015 14:51:24 +0100, by heinrichsweikamp
NEW: Support for hwHUD without the LED module
Mon, 02 Feb 2015 17:39:38 +0100, by heinrichsweikamp
button config (cR)
Mon, 02 Feb 2015 17:04:43 +0100, by heinrichsweikamp

less more | rev 285: (0) -100 -60 +60 +100 +300 tip

Mercurial > public > hwos_code

graph