Mercurial > public > hwos_code
graph
-
lower minimum backlight in eco modeThu, 20 Nov 2014 20:32:36 +0100, by heinrichsweikamp
-
cleanupWed, 12 Nov 2014 19:33:15 +0100, by heinrichsweikamp
-
minorTue, 11 Nov 2014 16:55:39 +0100, by heinrichsweikamp
-
(Slightly) reduce current consumption in Eco and sleep modeMon, 10 Nov 2014 13:54:20 +0100, by heinrichsweikamp
-
cleanupThu, 06 Nov 2014 15:28:59 +0100, by heinrichsweikamp
-
suppress ghost readings for long, open cablesThu, 06 Nov 2014 12:00:44 +0100, by heinrichsweikamp
-
allow auto-return from setpoint fallbackWed, 05 Nov 2014 14:43:13 +0100, by heinrichsweikamp
-
1.62beta startTue, 04 Nov 2014 15:21:32 +0100, by heinrichsweikamp
-
reset voting logic on sensor switchMon, 03 Nov 2014 17:31:03 +0100, by heinrichsweikamp
-
voting logic for external monitoringMon, 03 Nov 2014 17:25:19 +0100, by heinrichsweikamp
-
minorThu, 30 Oct 2014 17:45:50 +0100, by heinrichsweikamp
-
limit sensor-read ppO2 to 2.55barWed, 29 Oct 2014 15:33:36 +0100, by heinrichsweikamp
-
ignore un-calibrated sensors even if they become validWed, 29 Oct 2014 12:53:01 +0100, by heinrichsweikamp
-
NEW: Show Bailout Gas List in Surface mode (CCR Modes)Mon, 27 Oct 2014 11:28:48 +0100, by heinrichsweikamp
-
CHANGE: Longer timeout (4 min) for calibration menuSat, 25 Oct 2014 15:28:18 +0200, by heinrichsweikamp
-
minorWed, 22 Oct 2014 18:09:01 +0200, by heinrichsweikamp
-
BUGFIX: Check min and max values after PC configuration properlySat, 18 Oct 2014 10:03:28 +0200, by heinrichsweikamp
-
BUGFIX: Quit Apnea mode on the surface manuallyFri, 17 Oct 2014 13:31:14 +0200, by heinrichsweikamp
-
BUGFIX: O2 > 99% was not configurable from the PCThu, 16 Oct 2014 13:11:18 +0200, by heinrichsweikamp
-
minor cleanupFri, 10 Oct 2014 11:13:54 +0200, by heinrichsweikamp
-
BUGFIX: END/EAD updated when adjusting current gas during the diveThu, 09 Oct 2014 11:18:56 +0200, by heinrichsweikamp
-
1.60 work...Wed, 08 Oct 2014 17:57:37 +0200, by heinrichsweikamp
-
1.54 beta startTue, 07 Oct 2014 14:21:46 +0200, by heinrichsweikamp
-
BUGFIX: Average depth computationTue, 07 Oct 2014 13:45:21 +0200, by heinrichsweikamp
-
MergeTue, 07 Oct 2014 08:42:38 +0200, by heinrichsweikamp
-
surface pressure copy in simulatorMon, 06 Oct 2014 23:47:08 +0200, by heinrichsweikamp
-
CHANGE: Draw a frame around the dive mode menuMon, 06 Oct 2014 11:48:23 +0200, by heinrichsweikamp
-
CHANGE: Clarify Travel Gases with "---" as change depthSun, 05 Oct 2014 15:36:17 +0200, by heinrichsweikamp
-
minorWed, 01 Oct 2014 10:31:53 +0200, by heinrichsweikamp
-
BUGFIX: Future TTS in sensor modeTue, 30 Sep 2014 19:19:53 +0200, by heinrichsweikamp
-
1.54 beta startTue, 30 Sep 2014 10:43:57 +0200, by heinrichsweikamp
-
CHANGE: Compass readout smoothedTue, 30 Sep 2014 10:35:47 +0200, by heinrichsweikamp
-
CHANGE: Improve internal logbook usabilityMon, 29 Sep 2014 22:26:47 +0200, by heinrichsweikamp
-
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbookMon, 29 Sep 2014 12:03:26 +0200, by heinrichsweikamp
-
logbookSun, 28 Sep 2014 22:27:39 +0200, by heinrichsweikamp
-
BUGFIX: Flip compass with flipped screen, tooSun, 28 Sep 2014 18:44:07 +0200, by heinrichsweikamp
-
testing consumptionThu, 11 Sep 2014 15:41:48 +0200, by heinrichsweikamp
-
1.52 beta release - 1.53 beta startWed, 10 Sep 2014 16:13:16 +0200, by heinrichsweikamp
-
clarify diluent change in the documentationWed, 10 Sep 2014 12:44:56 +0200, by heinrichsweikamp
-
NEW: Safe tissue data, date and time during firmware updateTue, 09 Sep 2014 21:17:25 +0200, by heinrichsweikamp
-
skip fallback warning in OC modesTue, 09 Sep 2014 16:50:29 +0200, by heinrichsweikamp
-
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctlyMon, 08 Sep 2014 15:39:41 +0200, by heinrichsweikamp
-
1.51 beta release - 1.52 beta startMon, 08 Sep 2014 13:07:22 +0200, by heinrichsweikamp
-
nicer boot into surfacemodeThu, 04 Sep 2014 17:40:24 +0200, by heinrichsweikamp
-
make new parameters configurable through pcFri, 29 Aug 2014 08:58:27 +0200, by heinrichsweikamp
-
minorThu, 28 Aug 2014 20:36:14 +0200, by heinrichsweikamp
-
CHANGE: Re-arranged Settings Menu, add 180? rotate to menuThu, 28 Aug 2014 12:13:52 +0200, by heinrichsweikamp
-
NEW: Show ppO2 for change depth during gas setupWed, 27 Aug 2014 17:38:21 +0200, by heinrichsweikamp
-
minorThu, 21 Aug 2014 10:30:52 +0200, by heinrichsweikamp
-
BUGFIX: Clear Setpoint-Fallback warning when in bailoutThu, 21 Aug 2014 10:19:03 +0200, by heinrichsweikamp
-
work on flip screen...Mon, 18 Aug 2014 17:37:00 +0200, by heinrichsweikamp
-
1.51beta startWed, 13 Aug 2014 17:43:41 +0200, by heinrichsweikamp
-
1.50 stable releaseMon, 11 Aug 2014 11:32:44 +0200, by heinrichsweikamp
-
some cleanupWed, 06 Aug 2014 17:38:31 +0200, by heinrichsweikamp
-
some cleanupWed, 06 Aug 2014 11:59:04 +0200, by heinrichsweikamp
-
fallback default = 1Tue, 05 Aug 2014 17:11:48 +0200, by heinrichsweikamp
-
NEW: Setpoint-Fallback option for external O2 sensor failureTue, 05 Aug 2014 16:55:09 +0200, by heinrichsweikamp
-
1.45 beta releaseMon, 04 Aug 2014 12:10:35 +0200, by heinrichsweikamp
-
seperate option table, place in address <0x10000Sun, 03 Aug 2014 10:28:21 +0200, by heinrichsweikamp
-
option_read and option_write eeprom bankingThu, 31 Jul 2014 16:36:15 +0200, by mh
-
New changelog.txt formatThu, 31 Jul 2014 11:40:48 +0200, by heinrichsweikamp
-
1.44 beta releaseFri, 18 Jul 2014 10:29:23 +0200, by heinrichsweikamp
-
some cleanupThu, 17 Jul 2014 17:56:09 +0200, by heinrichsweikamp
-
minor: some extra protection against wrong gas selectionThu, 17 Jul 2014 14:34:10 +0200, by heinrichsweikamp
-
Simplify gas changeThu, 17 Jul 2014 14:24:51 +0200, by heinrichsweikamp
-
rename Deco Planner to SimulatorThu, 17 Jul 2014 13:29:25 +0200, by heinrichsweikamp
-
minorWed, 16 Jul 2014 14:39:56 +0200, by heinrichsweikamp
-
Show clock in Apnea mode, minor layout changes in Apnea modeTue, 15 Jul 2014 10:20:37 +0200, by heinrichsweikamp
-
BUGFIX: Surface interval was not displayed correctly in some casesMon, 14 Jul 2014 15:17:07 +0200, by heinrichsweikamp
-
Bugfix: Start dive mode simulator in correct depthTue, 08 Jul 2014 11:39:00 +0200, by heinrichsweikamp
-
NEW: Update warnings every secondFri, 04 Jul 2014 12:51:20 +0200, by heinrichsweikamp
-
no safety stop during menu displayThu, 03 Jul 2014 19:34:41 +0200, by heinrichsweikamp
-
minor cleanupThu, 03 Jul 2014 12:08:06 +0200, by heinrichsweikamp
-
catch timeout during set time/date commandTue, 01 Jul 2014 17:37:02 +0200, by heinrichsweikamp
-
1.41beta releaseTue, 01 Jul 2014 14:48:17 +0200, by heinrichsweikamp
-
fix depth<0m display, ceilingMon, 30 Jun 2014 10:58:02 +0200, by heinrichsweikamp
-
minorSun, 29 Jun 2014 14:21:23 +0200, by heinrichsweikamp
-
cleanupSun, 29 Jun 2014 13:53:46 +0200, by heinrichsweikamp
-
add ceiling displaySun, 29 Jun 2014 13:40:59 +0200, by heinrichsweikamp
-
Show %'s for non-GF deco model in surface modeFri, 27 Jun 2014 16:55:49 +0200, by heinrichsweikamp
-
minorFri, 27 Jun 2014 16:15:07 +0200, by heinrichsweikamp
-
battery check in sleepFri, 27 Jun 2014 15:52:43 +0200, by heinrichsweikamp
-
Do not show "GF info" for non-GF modesFri, 27 Jun 2014 10:44:06 +0200, by heinrichsweikamp
-
show heading with leading zerosFri, 27 Jun 2014 10:18:41 +0200, by heinrichsweikamp
-
minorWed, 25 Jun 2014 12:39:14 +0200, by heinrichsweikamp
-
show decomode in logbook and simulator w/o sensor typeMon, 23 Jun 2014 18:11:49 +0200, by heinrichsweikamp
-
FIX: Gas volume computation when using several travel mix.Mon, 23 Jun 2014 17:55:27 +0200, by heinrichsweikamp
-
minor fix: assert should pass for pure helium diluantMon, 23 Jun 2014 17:44:18 +0200, by heinrichsweikamp
-
MergeMon, 23 Jun 2014 16:14:33 +0200, by heinrichsweikamp
-
1.40 releaseTue, 17 Jun 2014 12:10:33 +0200, by heinrichsweikamp
-
Bugfix: CNS in plannerTue, 17 Jun 2014 12:00:20 +0200, by heinrichsweikamp
-
BUGFIX: OSTC settings via USB issuesTue, 10 Jun 2014 10:14:18 +0200, by heinrichsweikamp
-
MergeThu, 05 Jun 2014 11:53:21 +0200, by heinrichsweikamp
-
language updatesWed, 04 Jun 2014 19:19:18 +0200, by heinrichsweikamp
-
BUGFIX: wrong ppo2 recording parameter in short headerThu, 05 Jun 2014 11:53:00 +0200, by heinrichsweikamp
-
minorTue, 03 Jun 2014 13:20:44 +0200, by heinrichsweikamp
-
Show HUD voltages only in CCR mode...Tue, 03 Jun 2014 13:20:05 +0200, by heinrichsweikamp
-
Show a Safety Stop if enabled (Menu "Deco Parameters")Tue, 03 Jun 2014 12:25:47 +0200, by heinrichsweikamp
-
Minor language updatesMon, 02 Jun 2014 12:54:12 +0200, by heinrichsweikamp
-
NEW: Show End-of-Dive time together with clock during decoWed, 07 May 2014 14:57:58 +0200, by heinrichsweikamp
-
increase ir-timeout to 4 secondsSun, 04 May 2014 21:23:09 +0200, by heinrichsweikamp
-
1.30 releaseFri, 02 May 2014 19:38:14 +0200, by heinrichsweikamp
-
show event "bailout" in the internal logbookFri, 02 May 2014 14:13:35 +0200, by heinrichsweikamp
-
add event "bailout" in profileThu, 01 May 2014 21:16:31 +0200, by heinrichsweikamp
-
CHANGE: Always compute bailout plan based on all active gasesMon, 28 Apr 2014 16:26:31 +0200, by heinrichsweikamp
-
auto-reset compass filtering data before calibrationMon, 28 Apr 2014 11:33:00 +0200, by heinrichsweikamp
-
BUGFIX: Show "*" always in front of the initial Setpoint 1Mon, 28 Apr 2014 10:17:18 +0200, by heinrichsweikamp
-
BUGFIX: compass calibration does now timeout automatically after 60sTue, 22 Apr 2014 12:59:14 +0200, by heinrichsweikamp
-
clear pressure sensor compensation upon updateThu, 17 Apr 2014 10:28:04 +0200, by heinrichsweikamp
-
add sensor calibration option (PC only), some cleanupWed, 16 Apr 2014 22:31:09 +0200, by heinrichsweikamp
-
minor, always re-init compass in calibration loopTue, 15 Apr 2014 15:08:16 +0200, by heinrichsweikamp
-
NEW: automatic compass gain makes calibration quickerTue, 15 Apr 2014 14:40:49 +0200, by heinrichsweikamp