hwos_code: revision graph

graph

less more | rev 329: (0) -112 +112 tip

change button sensitivity range and default
Sun, 21 Jun 2015 12:12:12 +0200, by heinrichsweikamp
Fix: missing attention coloring for standard (static) ascend rate limit new_screen_layout
Sun, 14 Jun 2015 11:06:20 +0200, by janos_kovacs
Small fix for the custom grid layout new_screen_layout
Sun, 14 Jun 2015 00:16:00 +0200, by janos_kovacs
VSIbar #4: VSI settings submenu, graph option, logbook offset and compass calib. menu exit fix new_screen_layout
Sat, 13 Jun 2015 22:53:05 +0200, by Janos Kovacs
Merged default into new_screen_layout new_screen_layout
Sat, 13 Jun 2015 22:54:37 +0200, by Janos Kovacs
FIX NDL prediction error with Buhlmann model: might be desaturating too fast.
Sat, 13 Jun 2015 02:28:37 +0200, by jdg
FIX minor assert: separate diluant list means current gas can go up to 10.
Fri, 12 Jun 2015 22:18:21 +0200, by jDG
FIX 16bits CNS feedback: assert CNS up to 999%
Fri, 12 Jun 2015 22:15:57 +0200, by jDG
VSIbar #3f: roll back debug color new_screen_layout
Thu, 11 Jun 2015 17:02:09 +0100, by janos_kovacs
VSIbar #3e: additional filter on zero ascend rate new_screen_layout
Thu, 11 Jun 2015 16:07:29 +0100, by janos_kovacs
move flag13 into bank common new_screen_layout
Thu, 11 Jun 2015 16:44:32 +0200, by heinrichsweikamp
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar new_screen_layout
Thu, 11 Jun 2015 15:16:42 +0100, by janos_kovacs
VSIbar #3c: extra steps to keep calculation clear new_screen_layout
Thu, 11 Jun 2015 13:40:14 +0100, by janos_kovacs
VSIbar #3b: small fix on the bar's width new_screen_layout
Wed, 10 Jun 2015 22:47:38 +0100, by janos_kovacs
VSIbar #3: remaining changes for the split style bar new_screen_layout
Wed, 10 Jun 2015 22:32:38 +0100, by Janos Kovacs
Merged default into new_screen_layout new_screen_layout
Wed, 10 Jun 2015 22:24:27 +0100, by Janos Kovacs
FIX minor comment about deco offset unit...
Wed, 10 Jun 2015 16:03:21 +0200, by jDG
Config table for alternative display
Tue, 09 Jun 2015 10:47:12 +0200, by heinrichsweikamp
FIX missing extern .C definition.
Tue, 09 Jun 2015 02:15:01 +0200, by jdg
VSIbar #2: ascend bar + max-depth title alignment. Debug: bar-frame, zero-line, sim+- 0.1m new_screen_layout
Mon, 08 Jun 2015 01:36:05 +0200, by janos_kovacs
VSIbar #1: layout position changes new_screen_layout
Sun, 07 Jun 2015 22:07:55 +0200, by janos_kovacs
VSI text v2 merged from new_screen_layout into default
Fri, 05 Jun 2015 13:37:13 +0200, by Janos Kovacs
Merged Screen layout work #4 into VSItextv2 new_screen_layout
Tue, 02 Jun 2015 23:38:21 +0100, by Janos Kovacs
Merge default back to the new_screen_layout development branch new_screen_layout
Tue, 02 Jun 2015 17:34:19 +0100, by Janos Kovacs
rename tMODwarning
Tue, 02 Jun 2015 16:34:02 +0200, by heinrichsweikamp
Merge with new_screen_layout
Mon, 01 Jun 2015 17:19:37 +0200, by heinrichsweikamp
Add configuration option to control depth warning blinking new_screen_layout
Mon, 01 Jun 2015 15:21:25 +0200, by janos_kovacs
default branch
Mon, 01 Jun 2015 11:50:34 +0200, by heinrichsweikamp
New screen layout test new_screen_layout
Mon, 01 Jun 2015 11:48:05 +0200, by heinrichsweikamp
Merged Screen layout mod #1 into Screen layout work #3
Sun, 31 May 2015 21:24:16 +0200, by Janos Kovacs
Make char_I_bottom_usage and char_I_deco_usage configurable from PC
Sun, 31 May 2015 20:25:12 +0200, by heinrichsweikamp
new submenu for gas consumption, show actual mix instead of GAS1-GAS5 in deco planner
Sun, 31 May 2015 16:19:56 +0200, by heinrichsweikamp
German tGasUsage
Sun, 31 May 2015 10:42:47 +0200, by heinrichsweikamp
Slight more efficient bail deco, Test with 2 bail tanks.
Sun, 31 May 2015 02:47:50 +0200, by jDG
NEW CCR decoplan: 2nd pass to display bailout stops and gas volumes
Sun, 31 May 2015 02:14:09 +0200, by jDG
FIX clear before displaying gas volumes.
Sat, 30 May 2015 22:58:00 +0200, by jDG
FIX tests to use plans copyed from actual OSTC3 1.82 computer.
Sat, 30 May 2015 22:43:53 +0200, by jDG
ADD (back) Gas Volumes display after decoplanning.
Sat, 30 May 2015 21:34:01 +0200, by jDG
ADD tGasUsage, with FR translation (and DE,IT defaults)
Sat, 30 May 2015 21:33:04 +0200, by jDG
NEW gas_volume unit test in CCR mode. Works too.
Fri, 29 May 2015 02:50:12 +0200, by jdg
[mq]: 2015-05-29_02-40-44_r288+.diff
Fri, 29 May 2015 02:46:44 +0200, by jdg
FIX gas_volume shall read gas switches from char_O_deco_gas
Fri, 29 May 2015 02:40:43 +0200, by jdg
FIX gas_volumes: shall take stops in forward order.
Fri, 29 May 2015 02:24:03 +0200, by jdg
NEW test w/o stops and with stops
Fri, 29 May 2015 02:07:28 +0200, by jdg
NEW unit tests for gas volumes...
Fri, 29 May 2015 01:25:45 +0200, by jdg
preperations to compute gas consumtion in simulator
Thu, 28 May 2015 09:56:15 +0200, by heinrichsweikamp
1.82beta with new compass calib code
Wed, 27 May 2015 10:57:29 +0200, by heinrichsweikamp
Make a more compact COMPASS calibration code (<7KB), and add more tests.
Fri, 22 May 2015 14:50:40 +0200, by jDG
BUGFIX: Fix download issue for dives made with 1.80 firmware
Tue, 26 May 2015 17:40:13 +0200, by heinrichsweikamp
doku update
Tue, 26 May 2015 13:24:26 +0200, by heinrichsweikamp
bugfix wrong profile length in header
Tue, 26 May 2015 12:38:17 +0200, by heinrichsweikamp
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
Mon, 18 May 2015 21:25:56 +0200, by heinrichsweikamp
1.79beta - update internal sensor registers during boot
Mon, 18 May 2015 14:24:50 +0200, by heinrichsweikamp
Increase byte timeout in PC download mode, faster response to "Exit" in main menu
Tue, 12 May 2015 14:24:46 +0200, by heinrichsweikamp
rename into hwOS
Thu, 07 May 2015 13:11:14 +0200, by heinrichsweikamp
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
Tue, 05 May 2015 14:58:16 +0200, by heinrichsweikamp
CHANGE: Automatically abort connection fail after 2mins (Bluetooth only)
Mon, 04 May 2015 12:56:07 +0200, by heinrichsweikamp
1.78 release
Wed, 29 Apr 2015 16:54:58 +0200, by heinrichsweikamp
Update digital ppO2 data automatically
Tue, 28 Apr 2015 16:39:28 +0200, by heinrichsweikamp
increase min input voltage from 1,2mV to 1,9mV (cR only)
Wed, 22 Apr 2015 16:03:31 +0200, by heinrichsweikamp
adjust menu for different hardware versions
Mon, 20 Apr 2015 11:18:30 +0200, by heinrichsweikamp
BUGFIX: Increase timing tolerance for S8 HUD (cR only)
Sun, 19 Apr 2015 20:41:48 +0200, by heinrichsweikamp
BUGFIX: Analog sensors were ignored in 1.76
Thu, 16 Apr 2015 11:30:00 +0200, by heinrichsweikamp
Charge done indicator (cR and 2 Hardware)
Tue, 14 Apr 2015 16:16:14 +0200, by heinrichsweikamp
1.76 release
Mon, 30 Mar 2015 14:59:07 +0200, by heinrichsweikamp
Fix compass ruler's missing bottom ticks; Clear between the bearing marker lines and draw a dot.
Thu, 26 Mar 2015 14:21:42 +0100, by janos_kovacs
show unit8 options in menu left-aligned
Thu, 26 Mar 2015 13:50:02 +0100, by heinrichsweikamp
bugfix dynamic gas list
Thu, 26 Mar 2015 11:37:37 +0100, by heinrichsweikamp
language update
Wed, 25 Mar 2015 18:07:46 +0100, by heinrichsweikamp
increase immunity against false Qi data
Tue, 24 Mar 2015 19:48:17 +0100, by heinrichsweikamp
minor cleanup
Mon, 23 Mar 2015 19:58:19 +0100, by heinrichsweikamp
patch for bearing issue
Mon, 23 Mar 2015 19:41:27 +0100, by heinrichsweikamp
minor speed and size improvements for the compass routine
Mon, 23 Mar 2015 18:40:58 +0100, by heinrichsweikamp
place compass display code into compass_ops.asm
Mon, 23 Mar 2015 18:02:40 +0100, by heinrichsweikamp
add bearing option to compass
Mon, 23 Mar 2015 17:07:57 +0100, by heinrichsweikamp
preparations to set a course for the compass display
Fri, 20 Mar 2015 10:16:49 +0100, by heinrichsweikamp
another icon update
Thu, 19 Mar 2015 13:50:06 +0100, by heinrichsweikamp
change warning sign
Thu, 19 Mar 2015 12:28:23 +0100, by heinrichsweikamp
some cleanup, temporaly disable dive_warning.inc
Wed, 18 Mar 2015 17:39:27 +0100, by heinrichsweikamp
Graphical compass from kovacs
Wed, 18 Mar 2015 16:42:49 +0100, by heinrichsweikamp
ignore sensor for non-sensor hardware
Tue, 17 Mar 2015 12:16:15 +0100, by heinrichsweikamp
support hardware_flag for all possible hardware combinations
Mon, 16 Mar 2015 15:58:51 +0100, by heinrichsweikamp
BUGFIX: Always update CCR sensor data in Sensor-Menu
Fri, 13 Mar 2015 10:49:43 +0100, by heinrichsweikamp
minor docu update
Thu, 05 Mar 2015 10:36:56 +0100, by heinrichsweikamp
use single-byte hardware flag (again)
Wed, 04 Mar 2015 19:01:57 +0100, by heinrichsweikamp
minor docu update (removed typo)
Wed, 04 Mar 2015 16:26:48 +0100, by heinrichsweikamp
auto-select correct settings menu
Wed, 04 Mar 2015 16:25:44 +0100, by heinrichsweikamp
expand hardware_flag to 4 bytes
Tue, 03 Mar 2015 12:09:24 +0100, by heinrichsweikamp
docu update
Mon, 02 Mar 2015 17:05:09 +0100, by heinrichsweikamp
auto-select correct ccr menu
Mon, 02 Mar 2015 10:54:00 +0100, by heinrichsweikamp
CNANGE: aGF pair has same range then normal GF pair
Sun, 01 Mar 2015 21:10:14 +0100, by heinrichsweikamp
cleanup
Sun, 01 Mar 2015 13:06:17 +0100, by heinrichsweikamp
1.75 release
Thu, 26 Feb 2015 13:13:23 +0100, by heinrichsweikamp
configure hardware_flag byte
Wed, 25 Feb 2015 22:19:30 +0100, by heinrichsweikamp
under construction: new hardware_flag to configure different hardware versions
Wed, 25 Feb 2015 16:49:59 +0100, by heinrichsweikamp
Show OSTC2-like active gas boxes in surface mode
Wed, 25 Feb 2015 13:57:30 +0100, by heinrichsweikamp
show start gas in normal font
Wed, 25 Feb 2015 11:51:50 +0100, by heinrichsweikamp
show start gas in OC mode permanently
Sun, 22 Feb 2015 12:14:03 -0400, by mh
BUGFIX: Show average depth with one decimal digit only
Sat, 21 Feb 2015 20:05:57 +0100, by mh
Bugfix: Check for divemode before checking for menu
Fri, 20 Feb 2015 00:15:22 +0100, by mh
minor cleanup
Wed, 18 Feb 2015 23:07:04 +0100, by mh
1.74 release
Thu, 05 Feb 2015 14:51:24 +0100, by heinrichsweikamp
NEW: Support for hwHUD without the LED module
Mon, 02 Feb 2015 17:39:38 +0100, by heinrichsweikamp
button config (cR)
Mon, 02 Feb 2015 17:04:43 +0100, by heinrichsweikamp
BUGFIX: Show dives with >999mins divetime correctly
Sun, 01 Feb 2015 18:49:24 +0100, by heinrichsweikamp
temporally disable "Copy disable flags from digital input" routine
Thu, 29 Jan 2015 18:18:15 +0100, by heinrichsweikamp
PC config, 1.72 release
Wed, 14 Jan 2015 11:37:19 +0100, by heinrichsweikamp
check opt_max correctly
Tue, 06 Jan 2015 19:24:58 +0100, by heinrichsweikamp
minor: configure buttons during splash screen
Mon, 05 Jan 2015 16:13:15 +0100, by heinrichsweikamp
make button sensitivity configurable (cR hardware)
Mon, 05 Jan 2015 14:41:23 +0100, by heinrichsweikamp
init new 4kB Page in logbook memory when pointer is not valid.
Sun, 04 Jan 2015 21:24:01 +0100, by heinrichsweikamp
1.71beta start
Fri, 19 Dec 2014 17:56:40 +0100, by heinrichsweikamp

less more | rev 329: (0) -112 +112 tip

Mercurial > public > hwos_code

graph