Mercurial > public > hwos_code
graph
-
minor2014-12-10, by heinrichsweikamp
-
do not clear char_O_deco_gas in copy_deco_table2014-12-07, by heinrichsweikamp
-
cleanup2014-12-07, by heinrichsweikamp
-
NEW: Show plan parameters in decoplan result page2014-12-07, by heinrichsweikamp
-
charge indicator on surface screen2014-12-06, by heinrichsweikamp
-
always reboot display in divemode2014-12-01, by heinrichsweikamp
-
Preparations for 1.72014-11-26, by heinrichsweikamp
-
minor2014-11-23, by heinrichsweikamp
-
1.64 (Fix ambient light for cR)2014-11-21, by heinrichsweikamp
-
1.63beta release2014-11-21, by heinrichsweikamp
-
lower minimum backlight in eco mode2014-11-20, by heinrichsweikamp
-
cleanup2014-11-12, by heinrichsweikamp
-
minor2014-11-11, by heinrichsweikamp
-
(Slightly) reduce current consumption in Eco and sleep mode2014-11-10, by heinrichsweikamp
-
cleanup2014-11-06, by heinrichsweikamp
-
suppress ghost readings for long, open cables2014-11-06, by heinrichsweikamp
-
allow auto-return from setpoint fallback2014-11-05, by heinrichsweikamp
-
1.62beta start2014-11-04, by heinrichsweikamp
-
reset voting logic on sensor switch2014-11-03, by heinrichsweikamp
-
voting logic for external monitoring2014-11-03, by heinrichsweikamp
-
minor2014-10-30, by heinrichsweikamp
-
limit sensor-read ppO2 to 2.55bar2014-10-29, by heinrichsweikamp
-
ignore un-calibrated sensors even if they become valid2014-10-29, by heinrichsweikamp
-
NEW: Show Bailout Gas List in Surface mode (CCR Modes)2014-10-27, by heinrichsweikamp
-
CHANGE: Longer timeout (4 min) for calibration menu2014-10-25, by heinrichsweikamp
-
minor2014-10-22, by heinrichsweikamp
-
BUGFIX: Check min and max values after PC configuration properly2014-10-18, by heinrichsweikamp
-
BUGFIX: Quit Apnea mode on the surface manually2014-10-17, by heinrichsweikamp
-
BUGFIX: O2 > 99% was not configurable from the PC2014-10-16, by heinrichsweikamp
-
minor cleanup2014-10-10, by heinrichsweikamp
-
BUGFIX: END/EAD updated when adjusting current gas during the dive2014-10-09, by heinrichsweikamp
-
1.60 work...2014-10-08, by heinrichsweikamp
-
1.54 beta start2014-10-07, by heinrichsweikamp
-
BUGFIX: Average depth computation2014-10-07, by heinrichsweikamp
-
Merge2014-10-07, by heinrichsweikamp
-
surface pressure copy in simulator2014-10-06, by heinrichsweikamp
-
CHANGE: Draw a frame around the dive mode menu2014-10-06, by heinrichsweikamp
-
CHANGE: Clarify Travel Gases with "---" as change depth2014-10-05, by heinrichsweikamp
-
minor2014-10-01, by heinrichsweikamp
-
BUGFIX: Future TTS in sensor mode2014-09-30, by heinrichsweikamp
-
1.54 beta start2014-09-30, by heinrichsweikamp
-
CHANGE: Compass readout smoothed2014-09-30, by heinrichsweikamp
-
CHANGE: Improve internal logbook usability2014-09-29, by heinrichsweikamp
-
BUGFIX: False max. temp in Logbook, false Bailout and Gas 6 flags in logbook2014-09-29, by heinrichsweikamp
-
logbook2014-09-28, by heinrichsweikamp
-
BUGFIX: Flip compass with flipped screen, too2014-09-28, by heinrichsweikamp
-
testing consumption2014-09-11, by heinrichsweikamp
-
1.52 beta release - 1.53 beta start2014-09-10, by heinrichsweikamp
-
clarify diluent change in the documentation2014-09-10, by heinrichsweikamp
-
NEW: Safe tissue data, date and time during firmware update2014-09-09, by heinrichsweikamp
-
skip fallback warning in OC modes2014-09-09, by heinrichsweikamp
-
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly2014-09-08, by heinrichsweikamp
-
1.51 beta release - 1.52 beta start2014-09-08, by heinrichsweikamp
-
nicer boot into surfacemode2014-09-04, by heinrichsweikamp
-
make new parameters configurable through pc2014-08-29, by heinrichsweikamp
-
minor2014-08-28, by heinrichsweikamp
-
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu2014-08-28, by heinrichsweikamp
-
NEW: Show ppO2 for change depth during gas setup2014-08-27, by heinrichsweikamp
-
minor2014-08-21, by heinrichsweikamp
-
BUGFIX: Clear Setpoint-Fallback warning when in bailout2014-08-21, by heinrichsweikamp
-
work on flip screen...2014-08-18, by heinrichsweikamp
-
1.51beta start2014-08-13, by heinrichsweikamp
-
1.50 stable release2014-08-11, by heinrichsweikamp
-
some cleanup2014-08-06, by heinrichsweikamp
-
some cleanup2014-08-06, by heinrichsweikamp
-
fallback default = 12014-08-05, by heinrichsweikamp
-
NEW: Setpoint-Fallback option for external O2 sensor failure2014-08-05, by heinrichsweikamp
-
1.45 beta release2014-08-04, by heinrichsweikamp
-
seperate option table, place in address <0x100002014-08-03, by heinrichsweikamp
-
option_read and option_write eeprom banking2014-07-31, by mh
-
New changelog.txt format2014-07-31, by heinrichsweikamp
-
1.44 beta release2014-07-18, by heinrichsweikamp
-
some cleanup2014-07-17, by heinrichsweikamp
-
minor: some extra protection against wrong gas selection2014-07-17, by heinrichsweikamp
-
Simplify gas change2014-07-17, by heinrichsweikamp
-
rename Deco Planner to Simulator2014-07-17, by heinrichsweikamp
-
minor2014-07-16, by heinrichsweikamp
-
Show clock in Apnea mode, minor layout changes in Apnea mode2014-07-15, by heinrichsweikamp
-
BUGFIX: Surface interval was not displayed correctly in some cases2014-07-14, by heinrichsweikamp
-
Bugfix: Start dive mode simulator in correct depth2014-07-08, by heinrichsweikamp
-
NEW: Update warnings every second2014-07-04, by heinrichsweikamp
-
no safety stop during menu display2014-07-03, by heinrichsweikamp
-
minor cleanup2014-07-03, by heinrichsweikamp
-
catch timeout during set time/date command2014-07-01, by heinrichsweikamp
-
1.41beta release2014-07-01, by heinrichsweikamp
-
fix depth<0m display, ceiling2014-06-30, by heinrichsweikamp
-
minor2014-06-29, by heinrichsweikamp
-
cleanup2014-06-29, by heinrichsweikamp
-
add ceiling display2014-06-29, by heinrichsweikamp
-
Show %'s for non-GF deco model in surface mode2014-06-27, by heinrichsweikamp
-
minor2014-06-27, by heinrichsweikamp
-
battery check in sleep2014-06-27, by heinrichsweikamp
-
Do not show "GF info" for non-GF modes2014-06-27, by heinrichsweikamp
-
show heading with leading zeros2014-06-27, by heinrichsweikamp
-
minor2014-06-25, by heinrichsweikamp
-
show decomode in logbook and simulator w/o sensor type2014-06-23, by heinrichsweikamp
-
FIX: Gas volume computation when using several travel mix.2014-06-23, by heinrichsweikamp
-
minor fix: assert should pass for pure helium diluant2014-06-23, by heinrichsweikamp
-
Merge2014-06-23, by heinrichsweikamp
-
1.40 release2014-06-17, by heinrichsweikamp
-
Bugfix: CNS in planner2014-06-17, by heinrichsweikamp
-
BUGFIX: OSTC settings via USB issues2014-06-10, by heinrichsweikamp
-
Merge2014-06-05, by heinrichsweikamp
-
language updates2014-06-04, by heinrichsweikamp
-
BUGFIX: wrong ppo2 recording parameter in short header2014-06-05, by heinrichsweikamp
-
minor2014-06-03, by heinrichsweikamp
-
Show HUD voltages only in CCR mode...2014-06-03, by heinrichsweikamp
-
Show a Safety Stop if enabled (Menu "Deco Parameters")2014-06-03, by heinrichsweikamp
-
Minor language updates2014-06-02, by heinrichsweikamp
-
NEW: Show End-of-Dive time together with clock during deco2014-05-07, by heinrichsweikamp
-
increase ir-timeout to 4 seconds2014-05-04, by heinrichsweikamp
-
1.30 release2014-05-02, by heinrichsweikamp
-
show event "bailout" in the internal logbook2014-05-02, by heinrichsweikamp
-
add event "bailout" in profile2014-05-01, by heinrichsweikamp
-
CHANGE: Always compute bailout plan based on all active gases2014-04-28, by heinrichsweikamp
-
auto-reset compass filtering data before calibration2014-04-28, by heinrichsweikamp
-
BUGFIX: Show "*" always in front of the initial Setpoint 12014-04-28, by heinrichsweikamp
-
BUGFIX: compass calibration does now timeout automatically after 60s2014-04-22, by heinrichsweikamp
-
clear pressure sensor compensation upon update2014-04-17, by heinrichsweikamp
-
add sensor calibration option (PC only), some cleanup2014-04-16, by heinrichsweikamp