Mercurial > public > hwos_code
view src/options.asm @ 39:e4e91fe8b09d
remember last customview in dive and surface mode
| author | mh@mh-THINK.fritz.box |
|---|---|
| date | Thu, 15 Aug 2013 13:55:55 +0200 |
| parents | 413a1aa23acd |
| children | ec4d8503ec45 |
line wrap: on
line source
;============================================================================= ; ; File options.asm ; ; Manage all options data. ; ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. ;============================================================================= ; HISTORY ; 2011-07-12 : [jDG] Creation. ; ; RATIONALS: ; ; Provides a centralized file with #include "ostc3.inc" ; Mandatory header #include "strings.inc" #include "convert.inc" #include "ghostwriter.inc" #include "eeprom_rs232.inc" #include "external_flash.inc" #include "wait.inc" extern write_eeprom extern read_eeprom extern eeprom_serial_save,eeprom_opt_backup global option_reset_all ; Reset all options to factory default. global option_check_all ; Check all option and reset option if out of min/max boundary global option_reset ; Reset FSR0 option to factory default. global option_save_all ; Save options to EEPROM. global option_restore_all ; Restore options from EEPROM. global option_inc ; Increment FSR0 option. global option_draw ; STRCAT FRS0 option. ;============================================================================= CBLOCK tmp+0x10 ; Reserve space for wordprocessor & convert opt_type opt_default opt_inc ; Also default+1 (string), and enum low opt_min ; also enum high opt_max opt_unit:2 ; Multi-lingual unit text. opt_eeprom opt_backup_tbl:3 ; Reserved to tmp+0x1F... ENDC gui CODE ; Appends to other GUI segment ;============================================================================= ; Reset all options to factory defauts. ; ; INPUT: none ; OUTPUT: none ; TRASH: TBLPTR, TABLAT, WREG, FSR0, FSR1, FSR2 option_reset_all: clrf EEADRH read_int_eeprom .2 movff EEDATA,lo read_int_eeprom .3 movff EEDATA,hi tstfsz lo ; Total dives=0? bra option_reset_all2 ; No, skip resetting logbook tstfsz hi ; Total dives=0? bra option_reset_all2 ; No, skip resetting logbook clrf EEADRH ; Make sure to select eeprom bank 0 clrf EEDATA write_int_eeprom .4 write_int_eeprom .5 write_int_eeprom .6 write_int_eeprom .2 ; Also, delete total dive counter write_int_eeprom .3 call ext_flash_erase_logbook ; And complete logbook (!) option_reset_all2: clrf lo clrf hi call do_logoffset_common_write ; reset Logbook offset ; Point to option table begin movlw LOW(option_table_begin) movwf FSR0L movlw HIGH(option_table_begin) movwf FSR0H option_reset_all_1: movf FSR0L,W ; Reached end of table ? xorlw LOW(option_table_end) ; (8bit test -> 10 bytes x 128 options max) btfsc STATUS,Z ; YES: done. return rcall option_reset ; Reset one option. bra option_reset_all_1 ; and loop. ;============================================================================= ; Check all option and reset option if out of min/max boundary ; ; INPUT: none ; OUTPUT: none ; TRASH: TBLPTR, TABLAT, WREG, FSR0, FSR1, FSR2 option_check_all: ; Point to option table begin movlw LOW(option_table_begin) movwf FSR0L movlw HIGH(option_table_begin) movwf FSR0H option_check_all_1: movf FSR0L,W ; Reached end of table ? xorlw LOW(option_table_end) ; (8bit test -> 10 bytes x 128 options max) btfsc STATUS,Z ; YES: done. return rcall option_check ; check one option. bra option_check_all_1 ; and loop ;============================================================================= ; Read option handle ; INPUT: FSR0 = option handle ; OUTPUT: FSR1 = address of variable. ; TRASH: TBLPTR, TABLAT, WREG, FSR0, FSR1 option_read: movff FSR0L,TBLPTRL movlw HIGH(option_table_begin); Get 8 high bits. andlw 0xF0 ; Keep only the 4 highest ones. iorwf FSR0H,W ; Cat with the known 4 lower ones. movwf TBLPTRH ; And we have the high byte. movlw UPPER(option_table_begin) movwf TBLPTRU ; Read type, default and register from table tblrd*+ movff TABLAT,opt_type tblrd*+ movff TABLAT,opt_default tblrd*+ movff TABLAT,opt_inc tblrd*+ movff TABLAT,opt_min tblrd*+ movff TABLAT,opt_max tblrd*+ movff TABLAT,opt_eeprom tblrd*+ movff TABLAT,opt_unit+0 tblrd*+ movff TABLAT,opt_unit+1 tblrd*+ movff TABLAT,FSR1L tblrd*+ movff TABLAT,FSR1H movff TBLPTRL,FSR0L ; Advance handle too, for reset_all movff TBLPTRH,FSR0H return ;============================================================================= ; Check one option and reset if it's out of it's min/max boundaries ; INPUT: FSR0 = option handle ; OUTPUT: none ; TRASH: TBLPTR, TABLAT, WREG, FSR1, FSR2, lo ; option_check: ; Read type, default and register from table rcall option_read ; Switch on type movf opt_type,W ; Type == STRING ? xorlw 2 bz option_check_string ; String: Do not reset strings movf opt_min,W cpfsgt INDF1 ; bigger then opt_min? bra option_check_reset ; No, reset option movf INDF1,W cpfsgt opt_max ; bigger then INDF1? bra option_check_reset ; No, reset option return ; in range, return option_check_reset: movff opt_default,INDF1 ; reset option to default return ; Done. option_check_string: return ;============================================================================= ; Reset an option to its default value. ; INPUT: FSR0 = option handle ; OUTPUT: none ; TRASH: TBLPTR, TABLAT, WREG, FSR1, FSR2 ; option_reset: ; Read type, default and register from table rcall option_read ; Switch on type movf opt_type,W ; Type == STRING ? xorlw 2 bz opt_reset_string ; YES: special copy movff opt_default,INDF1 ; NO: just a 8bit indirect copy return opt_reset_string: movff FSR1L,FSR2L ; set string destination address. movff FSR1H,FSR2H movff opt_default+0,FSR1L ; Get handle to multi-lingual text in FSR1 movff opt_default+1,FSR1H movff TBLPTRL,opt_backup_tbl+0; TBLPTR trashed by text routine... movff TBLPTRH,opt_backup_tbl+1 movff TBLPTRU,opt_backup_tbl+2 call strcat_text ; Copy translated text to FSR2 movff opt_backup_tbl+0,TBLPTRL movff opt_backup_tbl+1,TBLPTRH movff opt_backup_tbl+2,TBLPTRU return ;============================================================================= ; Save all options to EEPROM option_save_all: ;---- Save option serial into EEPROM to detect reset and new version movlw LOW(eeprom_serial_save) movwf EEADR movlw HIGH(eeprom_serial_save) movf EEADRH movlw LOW(eeprom_opt_serial) movwf EEDATA call write_eeprom incf EEADR,F movlw HIGH(eeprom_opt_serial) movwf EEDATA call write_eeprom ;---- Save all options movlw LOW(option_table_begin) movwf FSR0L movlw HIGH(option_table_begin) movwf FSR0H option_save_all_1: movf FSR0L,W ; Reached end of table ? xorlw LOW(option_table_end) ; (8bit test -> 10 bytes x 128 options max) btfsc STATUS,Z ; YES: done. return rcall option_save ; Save one option. bra option_save_all_1 ; and loop. option_save: rcall option_read incf opt_eeprom,W ; Should we save it ? btfsc STATUS,Z ; eeprom address is FFh ? return ; YES: nothing to do. movf opt_eeprom,W ; Compute backup address in EEPROM addlw LOW(eeprom_opt_backup) ; Add offset movwf EEADR movlw HIGH(eeprom_opt_backup) movwf EEADRH movf opt_type,W ; Option type is string ? xorlw 2 bz option_save_string ; One byte to save to eeprom movff INDF1,EEDATA goto write_eeprom option_save_string: movff POSTINC1,EEDATA ; Write one byte call write_eeprom infsnz EEADR,F incf EEADRH,F decfsz opt_max ; Decrement string length bra option_save_string ; And loop while not finished return ;============================================================================= option_restore_all: ;---- Read option serial from EEPROM movlw LOW(eeprom_serial_save) movwf EEADR movlw HIGH(eeprom_serial_save) movf EEADRH call read_eeprom movlw LOW(eeprom_opt_serial) xorwf EEDATA,W bnz option_restore_bad ; Auto reset if changed. incf EEADR,F call read_eeprom movlw HIGH(eeprom_opt_serial) xorwf EEDATA,W bz option_restore_ok ; Auto reset if changed. option_restore_bad: call option_reset_all ; Reset RAM contains goto option_save_all ; Then save to EEPROM ;---- Proper restore option_restore_ok: movlw LOW(option_table_begin) movwf FSR0L movlw HIGH(option_table_begin) movwf FSR0H option_restore_all_1: movf FSR0L,W ; Reached end of table ? xorlw LOW(option_table_end) ; (8bit test -> 10 bytes x 128 options max) btfsc STATUS,Z ; YES: done. return rcall option_restore ; Restore one option. bra option_restore_all_1 ; and loop. return option_restore: rcall option_read incf opt_eeprom,W ; Should we save it ? btfsc STATUS,Z ; eeprom address is FFh ? return ; YES: nothing to do. movf opt_eeprom,W ; Compute backup address in EEPROM addlw LOW(eeprom_opt_backup) ; Add offset movwf EEADR movlw HIGH(eeprom_opt_backup) movwf EEADRH movf opt_type,W ; Option type is string ? xorlw 2 bz option_restore_string ; Read one byte from eeprom call read_eeprom movff EEDATA, INDF1 ; And restore option register. return option_restore_string: call read_eeprom ; Read one byte, and movff EEDATA,POSTINC1 ; restore it infsnz EEADR,F incf EEADRH,F decfsz opt_max ; Decrement string length bra option_restore_string ; And loop while not finished return ;============================================================================= ; Increment an option, based on type, and boundary. ; INPUT: FSR0 = option handle ; OUTPUT: none ; TRASH: TBLPTR, TABLAT, WREG, FSR0, FSR1 option_inc: ; Read type, default and register from table rcall option_read ; Switch on type movf opt_type,W bz option_inc_uint8 dcfsnz WREG bra option_inc_enum8 dcfsnz WREG bra option_inc_string option_inc_uint8: ; Defaults type too... movf INDF1,W addwf opt_inc,W cpfslt opt_max bra option_inc_1 movf opt_min,W option_inc_1: movwf INDF1 return option_inc_enum8: ; Always +1 incf INDF1,W cpfsgt opt_max clrf WREG movwf INDF1 return option_inc_string: ; No edition yet... return ;============================================================================= ; Strcat option into FSR2 buffer. option_draw: ; Read type, default and register from table rcall option_read ; Switch on type movf opt_type,W bz option_draw_uint8 dcfsnz WREG bra option_draw_enum8 dcfsnz WREG bra option_draw_string return ; Unknown: return... option_draw_uint8: movff INDF1,lo ; Draw value. output_8 clrf INDF2 ; Make sure to close string... btfsc settime_setdate ; In the Set Time or Set Date menu? return ; Yes, ignore the rest movf opt_unit+0,W ; Is there a unit to append ? iorwf opt_unit+1,W rcall option_draw_unit movf opt_default,W ; Default value cpfseq lo ; Current value bra option_draw_uint8_2 ; Not default, add * return ; Default, Done. option_draw_uint8_2: PUTC "*" return ; Done. option_draw_unit: movff opt_unit+0,FSR1L movff opt_unit+1,FSR1H goto strcat_text ;---- Draw an enumerated value (set of translated strings) option_draw_enum8: movf INDF1,W ; Get current value. cpfsgt opt_max ; Bound value clrf WREG addwf WREG ; *= 2 addwf opt_inc,W ; Base text + 2 * value movwf FSR1L movlw 0 addwfc opt_min,W ; Propagate carry movwf FSR1H ; Into FSR1 goto strcat_text option_draw_string: movff POSTINC1,POSTINC2 decfsz opt_max bra option_draw_string return ;============================================================================= ; Options Tables OPTION_UINT8 MACRO lbl, min, max, default, unit, eeprom, register global lbl lbl: db 0, default ; Type0 = INT8 db 1, min db max, eeprom dw unit dw register ENDM OPTION_UINT8p2 MACRO lbl, min, max, default, unit, eeprom, register global lbl lbl: db 0, default ; Type0 = INT8 db 2, min db max, eeprom dw unit dw register ENDM OPTION_UINT8p3 MACRO lbl, min, max, default, unit, eeprom, register global lbl lbl: db 0, default ; Type0 = INT8 db 3, min db max, eeprom dw unit dw register ENDM OPTION_UINT8p10 MACRO lbl, min, max, default, unit, eeprom, register global lbl lbl: db 0, default ; Type0 = INT8 db .10, min db max, eeprom dw unit dw register ENDM OPTION_ENUM8 MACRO lbl, max, default, tValue, eeprom, register global lbl extern tValue lbl: db 1, default ; Type1 = ENUM db LOW(tValue), HIGH(tValue) db max, eeprom dw 0 ; No unit dw register ENDM OPTION_BOOL MACRO lbl, default, eeprom, register OPTION_ENUM8 lbl, 2, default, tNo, eeprom, register ENDM OPTION_STRING MACRO lbl, length, defText, eeprom, register global lbl lbl: db 2, LOW(defText) ; Type2 = STRING db HIGH(defText), 0 db length, eeprom dw 0 ; No unit dw register ENDM ;============================================================================= ; Option table ; OPTION_UINT8 Label, min, max, default, text-string, EEPROM location (-1 for RAM only), RAM location ; Manage Gas List. extern tPercent, tMeters, tMinutes, tGasDisabled, tbar, tcharx option_table_begin: extern char_I_deco_gas_change, char_I_setpoint_change, char_I_setpoint_cbar, char_I_dil_change ;============================================================================= ; Manage Decoplaner & Dive parameters extern char_I_dive_interval, char_I_bottom_time, char_I_bottom_depth OPTION_UINT8p10 odiveInterval, .0, .240, .0, tMinutes, -1, char_I_dive_interval OPTION_UINT8p2 obottomTime, .1, .60, .5, tMinutes, -1, char_I_bottom_time OPTION_UINT8p3 obottomDepth, .12,.120, .21, tMeters, -1, char_I_bottom_depth extern char_I_deco_model, char_I_saturation_multiplier, char_I_desaturation_multiplier OPTION_ENUM8 oDiveMode, 4, 0, tDvOC, .8, opt_dive_mode OPTION_ENUM8 oDecoMode, 2, 1, tZHL16, .9, char_I_deco_model OPTION_UINT8p10 oPPO2Max, .120, ppo2_warning_high, .160, 0, .10, opt_ppO2_max OPTION_UINT8 oLastDeco, .3, .6, .3, tMeters, .11, opt_last_stop OPTION_UINT8 oGF_low, .10, .100, .30, tPercent, .12, opt_GF_low OPTION_UINT8 oGF_high, .60, .110, .85, tPercent, .13, opt_GF_high OPTION_UINT8p10 osatmult, .100, .140, .110,tPercent, .14, char_I_saturation_multiplier OPTION_UINT8p10 odesatmult, .60, .100, .90,tPercent, .15, char_I_desaturation_multiplier OPTION_UINT8p10 oPPO2Min, .16, ppo2_warning_low, .19, 0, .16, opt_ppO2_min OPTION_UINT8 oaGF_low, .60, .100, .60, tPercent, .17, opt_aGF_low OPTION_UINT8 oaGF_high, .70, .120, .85, tPercent, .18, opt_aGF_high OPTION_BOOL oEnable_aGF, 1, .19, opt_enable_aGF ; =1: aGF can be selected underwater OPTION_UINT8 oCompassGain, 0, 7, 6, tcharx, .20, opt_compass_gain ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) OPTION_ENUM8 oSamplingRate, 2, 0, tSampling2s, .21, opt_sampling_rate ; =1: 10s, =0: 2s ;============================================================================= ; Managing Settings extern char_I_extra_time OPTION_UINT8 oExtraTime, 0, .9, 5,tMinutes, .22, char_I_extra_time OPTION_ENUM8 oBrightness, 3, 0, tEco, .23, opt_brightness OPTION_UINT8 oDiveSalinity, 0, 4, 0, tPercent, .24, opt_salinity OPTION_ENUM8 oCCRMode, 2, 0, tCCRModeFixedSP, .25, opt_ccr_mode extern tDefName OPTION_ENUM8 oLanguage, 4, 0, tEnglish, .26, opt_language OPTION_ENUM8 oDateFormat, 3, 1, tDateformat,.27, opt_dateformat OPTION_ENUM8 oUnits, 2, 0, tMetric, .28, opt_units ; 0=Meters, 1=Feets ;============================================================================= ; Compass calibration data OPTION_UINT8 oCalx0, 0,.255,.0, 0, .29, compass_CX_f+0 OPTION_UINT8 oCalx1, 0,.255,.0, 0, .30, compass_CX_f+1 OPTION_UINT8 oCaly0, 0,.255,.0, 0, .31, compass_CY_f+0 OPTION_UINT8 oCaly1, 0,.255,.0, 0, .32, compass_CY_f+1 OPTION_UINT8 oCalz0, 0,.255,.0, 0, .33, compass_CZ_f+0 OPTION_UINT8 oCalz1, 0,.255,.0, 0, .34, compass_CZ_f+1 OPTION_ENUM8 oGas1, 3, 1, tGasDisabled, .35, opt_gas_type+0; 0=Disabled, 1=First, 2=Travel, 3=Deco OPTION_ENUM8 oGas2, 3, 0, tGasDisabled, .36, opt_gas_type+1 OPTION_ENUM8 oGas3, 3, 0, tGasDisabled, .37, opt_gas_type+2 OPTION_ENUM8 oGas4, 3, 0, tGasDisabled, .38, opt_gas_type+3 OPTION_ENUM8 oGas5, 3, 0, tGasDisabled, .39, opt_gas_type+4 OPTION_UINT8 oGas1O2, .21,.100, .21, tPercent, .40, opt_gas_O2_ratio+0 OPTION_UINT8 oGas1He, .1, .100, .0, tPercent, .41, opt_gas_He_ratio+0 OPTION_UINT8 oGas2O2, .21,.100, .21, tPercent, .42, opt_gas_O2_ratio+1 OPTION_UINT8 oGas2He, .1, .100, .0, tPercent, .43, opt_gas_He_ratio+1 OPTION_UINT8 oGas3O2, .21,.100, .21, tPercent, .44, opt_gas_O2_ratio+2 OPTION_UINT8 oGas3He, .1, .100, .0, tPercent, .45, opt_gas_He_ratio+2 OPTION_UINT8 oGas4O2, .21,.100, .21, tPercent, .46, opt_gas_O2_ratio+3 OPTION_UINT8 oGas4He, .1, .100, .0, tPercent, .47, opt_gas_He_ratio+3 OPTION_UINT8 oGas5O2, .21,.100, .21, tPercent, .48, opt_gas_O2_ratio+4 OPTION_UINT8 oGas5He, .1, .100, .0, tPercent, .49, opt_gas_He_ratio+4 OPTION_UINT8 oGas1Depth, .0, .100, .0, tMeters, .50, char_I_deco_gas_change+0 OPTION_UINT8 oGas2Depth, .0, .100, .0, tMeters, .51, char_I_deco_gas_change+1 OPTION_UINT8 oGas3Depth, .0, .100, .0, tMeters, .52, char_I_deco_gas_change+2 OPTION_UINT8 oGas4Depth, .0, .100, .0, tMeters, .53, char_I_deco_gas_change+3 OPTION_UINT8 oGas5Depth, .0, .100, .0, tMeters, .54, char_I_deco_gas_change+4 OPTION_UINT8 oDil1O2, .21,.100, .21, tPercent, .55, opt_dil_O2_ratio+0 OPTION_UINT8 oDil1He, .1, .100, .0, tPercent, .56, opt_dil_He_ratio+0 OPTION_UINT8 oDil2O2, .21,.100, .21, tPercent, .57, opt_dil_O2_ratio+1 OPTION_UINT8 oDil2He, .1, .100, .0, tPercent, .58, opt_dil_He_ratio+1 OPTION_UINT8 oDil3O2, .21,.100, .21, tPercent, .59, opt_dil_O2_ratio+2 OPTION_UINT8 oDil3He, .1, .100, .0, tPercent, .60, opt_dil_He_ratio+2 OPTION_UINT8 oDil4O2, .21,.100, .21, tPercent, .61, opt_dil_O2_ratio+3 OPTION_UINT8 oDil4He, .1, .100, .0, tPercent, .62, opt_dil_He_ratio+3 OPTION_UINT8 oDil5O2, .21,.100, .21, tPercent, .63, opt_dil_O2_ratio+4 OPTION_UINT8 oDil5He, .1, .100, .0, tPercent, .64, opt_dil_He_ratio+4 OPTION_UINT8 oSetPoint1, .20, .160, .70, tbar, .65, char_I_setpoint_cbar+0 OPTION_UINT8 oSetPoint2, .20, .160, .90, tbar, .66, char_I_setpoint_cbar+1 OPTION_UINT8 oSetPoint3, .20, .160, .100, tbar, .67, char_I_setpoint_cbar+2 OPTION_UINT8 oSetPoint4, .20, .160, .120, tbar, .68, char_I_setpoint_cbar+3 OPTION_UINT8 oSetPoint5, .20, .160, .140, tbar, .69, char_I_setpoint_cbar+4 OPTION_UINT8 oSP1Depth, .0, .100, .0, tMeters, .70, char_I_setpoint_change+0 OPTION_UINT8 oSP2Depth, .0, .100, .0, tMeters, .71, char_I_setpoint_change+1 OPTION_UINT8 oSP3Depth, .0, .100, .0, tMeters, .72, char_I_setpoint_change+2 OPTION_UINT8 oSP4Depth, .0, .100, .0, tMeters, .73, char_I_setpoint_change+3 OPTION_UINT8 oSP5Depth, .0, .100, .0, tMeters, .74, char_I_setpoint_change+4 OPTION_ENUM8 oDil1, 2, 1, tDilDisabled, .75, opt_dil_type+0 ; 0=Disabled, 1=First, 2=Normal OPTION_ENUM8 oDil2, 2, 0, tDilDisabled, .76, opt_dil_type+1 OPTION_ENUM8 oDil3, 2, 0, tDilDisabled, .77, opt_dil_type+2 OPTION_ENUM8 oDil4, 2, 0, tDilDisabled, .78, opt_dil_type+3 OPTION_ENUM8 oDil5, 2, 0, tDilDisabled, .79, opt_dil_type+4 OPTION_UINT8 oDil1Depth, .0, .100, .0, tMeters, .80, char_I_dil_change+0 OPTION_UINT8 oDil2Depth, .0, .100, .0, tMeters, .81, char_I_dil_change+1 OPTION_UINT8 oDil3Depth, .0, .100, .0, tMeters, .82, char_I_dil_change+2 OPTION_UINT8 oDil4Depth, .0, .100, .0, tMeters, .83, char_I_dil_change+3 OPTION_UINT8 oDil5Depth, .0, .100, .0, tMeters, .84, char_I_dil_change+4 OPTION_STRING oName, opt_name_length, tDefName, .85, opt_name ; opt_name from 85 to 145 ; Set Time/Set Date OPTION_UINT8 oSetHours, .0, .23, .0, 0, -1, hours OPTION_UINT8 oSetMinutes, .0, .59, .0, 0, -1, mins OPTION_UINT8 oSetDay, .1, .31, .0, 0, -1, day OPTION_UINT8 oSetMonth, .1, .12, .0, 0, -1, month OPTION_UINT8 oSetYear, .13,.20, .0, 0, -1, year option_table_end: END