Mercurial > public > hwos_code
view src/tft_outputs.asm @ 648:aeca5717d9eb
3.17 / 10.72 release
| author | heinrichs weikamp |
|---|---|
| date | Fri, 04 Mar 2022 08:29:36 +0100 |
| parents | 357341239438 |
| children | ef2ed7e3a895 |
line wrap: on
line source
;============================================================================= ; ; File tft_outputs.asm * combined next generation V3.12.3 ; ; high-level Display Outputs ; ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. ;============================================================================= ; HISTORY ; 2011-08-07 : [mH] moving from OSTC code #include "hwos.inc" ; mandatory header #include "shared_definitions.h" ; mailbox from/to p2_deco.c #include "tft.inc" #include "start.inc" #include "strings.inc" #include "convert.inc" #include "varargs.inc" #include "math.inc" #include "eeprom_rs232.inc" #include "adc_lightsensor.inc" #include "surfmode.inc" #include "divemode.inc" #include "ghostwriter.inc" #include "customview.inc" #include "i2c.inc" #include "calibrate.inc" #include "gaslist.inc" #include "rx_ops.inc" #include "logbook.inc" #include "external_flash.inc" #include "colorschemes.inc" ;---- external Functions ----------------------------------------------------- extern get_first_gas_to_WREG ;---- external Texts --------------------------------------------------------- extern tFirmware extern tFirmwareDate extern tHardware extern tSerial extern tTotalDives extern tBatteryV extern tSensorC extern tSensorD extern tUptime extern tPPO2MIN extern tPPO2Max extern tPPO2DECO extern tbar IFDEF _ccr_pscr extern tPPO2MINCC ENDIF IFDEF _rx_functions extern tFirmware_rx ENDIF IFDEF _compass extern tCalX,tCalY,tCalZ ENDIF ;============================================================================= pallet_table CODE_PACK 0x09800 ; must be at 0x***00 ;============================================================================= pallet_table: ; mask disabled memo advice attention warning ; pallet ; --------------- ------------------- --------------- --------------- --------------- --------------- -------- DB color_green, color_lightblue, color_white, color_green, color_yellow, color_red ; standard DB color_red, color_dark_red, color_orange, color_greenish, color_pink, color_red ; reddish DB color_cyan, color_dark_green, color_green, color_green, color_cyan, color_red ; greenish DB color_blue, color_deepblue, color_lightblue,color_greenish, color_orange, color_red ; blueish ;============================================================================= tft_out1 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; load standard Color Pallet ; global TFT_load_std_color_pallet TFT_load_std_color_pallet: clrf WREG ; select standard pallet bra TFT_load_color_pallet ; load color pallet ;----------------------------------------------------------------------------- ; load Dive Mode Color Pallet ; global TFT_load_dive_color_pallet TFT_load_dive_color_pallet: movff opt_dive_color_scheme,WREG ; get color scheme selection ;bra TFT_load_color_pallet ; load color pallet ; Helper Function - load color pallet TFT_load_color_pallet: mullw .6 ; 6 bytes per pallet, compute pallet offset movf PRODL,W ; get pallet offset, low movwf TBLPTRL ; set table pointer, low movlw HIGH (pallet_table) ; get start of table, high movwf TBLPTRH ; set table pointer, high movlw UPPER (pallet_table) ; get start of table, upper movwf TBLPTRU ; set table pointer, upper lfsr FSR2,pallet_color_mask ; point to first color in pallet movlw .6 ; initialize loop counter TFT_load_color_pallet_loop: TBLRD*+ ; read color movff TABLAT,POSTINC2 ; copy color to pallet decfsz WREG ; decrement loop counter, reached zero? bra TFT_load_color_pallet_loop ; NO - loop return ; YES - done ;============================================================================= tft_out2 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Color-Code a Tank Pressure or SAC Rate ; ; Input hi:lo pressure / SAC rate ; TFT_color_code_pres_sac: btfss hi,int_not_avail_flag ; is the not-available flag set? bra TFT_color_code_tank_pres_1 ; NO bcf hi,int_not_avail_flag ; YES - clear not-available flag TFT_color_code_tank_pres_0: ; - entry point for outdated flag bcf hi,int_outdated_flag ; - clear outdated flag (it may be set) bcf hi,int_warning_flag ; - clear warning flag (it may be set) bcf hi,int_attention_flag ; - clear attention flag (it may be set) FONT_COLOR_DISABLED ; - set to disabled color and return return ; - done TFT_color_code_tank_pres_1: btfsc hi,int_outdated_flag ; is the outdated flag set? bra TFT_color_code_tank_pres_0 ; YES - handle alike with not-available flag btfss hi,int_warning_flag ; NO - is the warning flag set? bra TFT_color_code_tank_pres_2 ; NO bcf hi,int_attention_flag ; YES - clear attention flag (it may be set) bcf hi,int_warning_flag ; - clear warning flag FONT_COLOR_WARNING ; - select warning color return ; - done TFT_color_code_tank_pres_2: btfss hi,int_attention_flag ; is the attention flag set? bra TFT_color_code_tank_pres_3 ; NO - set memo color and return bcf hi,int_attention_flag ; YES - clear attention flag FONT_COLOR_ATTENTION ; - set to attention color return ; - done TFT_color_code_tank_pres_3: FONT_COLOR_MEMO ; set to memo color return ; done ;----------------------------------------------------------------------------- ; Color-Code a Gas by its ppO2 ; ; Input hi O2% of the gas ; pressure_abs_10 current absolute pressure / 10 ; global TFT_color_code_gaslist TFT_color_code_gaslist: ; check for very high ppO2 MOVII pressure_abs_10,xA ; get absolute pressure / 10 movff hi,xB+0 ; get O2% clrf xB+1 ; ... call mult16x16 ; hi * absolute pressure / 10 ; check if ppO2 > 6.55 bar tstfsz xC+2 ; char_I_O2_ratio * absolute pressure / 10 > 65536, i.e. ppO2 > 6.55 bar ? bra TFT_color_code_gaslist_warn ; YES - set warning color and return ; check if ppO2 > 3.30 bar btfsc xC+1,7 ; ppO2 > 3.30 bar ? bra TFT_color_code_gaslist_warn ; YES - set warning color and return ; check for low ppO2 MOVII xC,sub_a ; get ppO2 of the gas movff char_I_ppO2_min,WREG ; get minimum ppO2 mullw d'100' ; compute (minimum ppO2) * 100 MOVII PRODL,sub_b ; copy result to sub_b call cmpU16 ; compare (sub_a - sub_b) btfsc neg_flag ; lower than ppO2 min? bra TFT_color_code_gaslist_warn ; YES - set warning color and return ; check for high ppO2 movff char_O_deco_info,WREG ; bank-safe copy of deco info vector btfsc WREG,deco_mode ; are we in deco? bra TFT_color_code_gaslist_deco ; YES - check against ppO2 max deco only ; check for ppO2 max travel/normal movff char_I_ppO2_max_work,WREG ; ppo2 max during working phase mullw d'100' ; char_I_ppO2_max_work*100 ADDLI ppO2_margin_on_max,PROD ; add ppO2 margin on max value to compensate for surface pressures > 1000 hPa MOVII PRODL,sub_b ; copy result to sub_b call cmpU16 ; compare (sub_a - sub_b) btfss neg_flag ; higher than ppO2 max travel/deco? FONT_COLOR_ATTENTION ; YES - set attention color ;bra TFT_color_code_gaslist_deco ; continue checking against max deco ; check for ppO2 max deco TFT_color_code_gaslist_deco: movff char_I_ppO2_max_deco,WREG ; ppo2 max for deco mullw d'100' ; char_I_ppO2_max_deco * 100 ADDLI ppO2_margin_on_max,PROD ; add ppO2 margin on max value to compensate for surface pressures > 1000 hPa MOVII PRODL,sub_b ; copy result to sub_b call cmpU16 ; compare (sub_a - sub_b) btfsc neg_flag ; higher than ppO2 max deco? return ; NO - done ;bra TFT_color_code_gaslist_warn ; YES - set warning color and return ; Helper Function - set waring color and return TFT_color_code_gaslist_warn: FONT_COLOR_WARNING ; select warning color return ; done ;----------------------------------------------------------------------------- ; Color-Code the Ceiling Depth ; ; Input mpr ceiling depth [mbar] ; pressure_rel_cur_cached current relative pressure [mbar] ; TFT_color_code_ceiling: ; check for invalid btfsc hi,char_invalid_flag ; is the invalid flag set? (bit 7 here) bra TFT_color_code_ceiling_dis ; YES - set to disabled color and return ; check for ceiling MOVII pressure_rel_cur_cached,sub_a;get current pressure to sub_a MOVII mpr,sub_b ; get ceiling to sub_b call cmpU16 ; sub_a - sub_b = relative pressure [mbar] - int_O_ceiling [mbar] btfss neg_flag ; is current depth < ceiling (too shallow) ? bra TFT_color_code_ceiling_memo ; NO - set to memo color and return ; check for outside movff char_O_deco_warnings,WREG ; bank-safe copy of deco warnings btfss WREG,outside_warning ; are we currently outside of the ZH-L16 model? bra TFT_color_code_ceiling_attn ; NO - set to attention color and return ;bra TFT_color_code_ceiling_warn ; YES - set to warnings color and return ; Helper Functions - select color and return TFT_color_code_ceiling_warn: FONT_COLOR_WARNING ; select color return ; done TFT_color_code_ceiling_attn: FONT_COLOR_ATTENTION ; select color return ; done TFT_color_code_ceiling_memo: FONT_COLOR_MEMO ; select color return ; done TFT_color_code_ceiling_dis: bcf hi,char_invalid_flag ; clear the invalid flag (bit 7 here) FONT_COLOR_DISABLED ; select disabled color return ; done ;----------------------------------------------------------------------------- ; Color-Code the Stop Depth ; ; memo color if below stop depth, ; attention color if above stop but below ceiling*, ; warning color if above stop and ceiling* ; ; Input: depth_meter current depth ; lo stop depth ; char_O_deco_gas deco data valid flag ; ; * the ceiling depth is calculated using current (interpolated) GF ; TFT_color_code_stop: ; check for invalid movff char_O_deco_gas+0,WREG ; get flag for invalid deco data btfsc WREG,char_invalid_flag ; is the invalid flag set? bra TFT_color_code_stop_dis ; YES - set to disabled color and return ; check for shallower than stop depth movf lo,W ; get depth of first stop in meters into WREG subwf depth_meter,W ; compute current depth - stop depth btfsc STATUS,C ; result negative? bra TFT_color_code_stop_1 ; NO - not shallower than stop depth, check for ascent advice MOVII int_O_ceiling,sub_b ; YES - get ceiling depth in mbar btfsc sub_b+1,char_invalid_flag ; - is the invalid flag set? (bit 7 here) bra TFT_color_code_stop_warn ; YES - select warning color and return MOVII pressure_rel_cur_cached,sub_a; NO - get current pressure call cmpU16 ; - sub_a - sub_b = relative pressure - int_O_ceiling btfsc neg_flag ; - is ceiling > current depth? bra TFT_color_code_stop_warn ; YES - set to warning color and return bra TFT_color_code_stop_attn ; NO - set to attention color and return ; check for ascent advice TFT_color_code_stop_1: movf lo,W ; get depth of first stop in meters into WREG incf WREG,W ; compute stop depth + 1 meter subwf depth_meter,W ; compute current depth - (first stop depth + 1 meter) btfss STATUS,C ; result negative? bra TFT_color_code_stop_memo ; YES - within 1 meter of stop depth, use memo color btfsc deco_region ; NO - within deco stops region? bra TFT_color_code_stop_advc ; YES - use advice color and return ;bra TFT_color_code_stop_memo ; NO - use memo color and return ; Helper Functions - select color and return TFT_color_code_stop_memo: FONT_COLOR_MEMO ; select color return ; done TFT_color_code_stop_advc: FONT_COLOR_ADVICE ; select color bsf win_invert ; print in inverse return ; done TFT_color_code_stop_attn: FONT_COLOR_ATTENTION ; select color return ; done TFT_color_code_stop_warn: FONT_COLOR_WARNING ; select color return ; done TFT_color_code_stop_dis: FONT_COLOR_DISABLED ; select color return ; done ;----------------------------------------------------------------------------- ; Color-Code the current Depth ; TFT_color_code_depth: TSTOSS opt_depth_warn ; depth warning switched on? bra TFT_color_code_depth_no_mod ; NO btfsc warn_det_depth_limit ; YES - depth limit warning active? bra TFT_color_code_depth_warn ; YES - set to warning color bra TFT_color_code_depth_mod ; NO - check depth against MOD TFT_color_code_depth_no_mod: btfsc warn_det_depth_limit ; depth limit warning active? bra TFT_color_code_depth_warn ; YES - set to warning color and return bra TFT_color_code_depth_memo ; NO - set to memo color and return... TFT_color_code_depth_mod: IFDEF _ccr_pscr movff opt_dive_mode,WREG ; get deco mode: 0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=PSCR decfsz WREG,F ; in CCR mode? bra TFT_color_code_depth_no_ccr ; NO - continue checking for ppO2 btfss bailout_mode ; YES - check if in bailout bra TFT_color_code_depth_outside; NO - continue checking for outside ZHL16 model ;bra TFT_color_code_depth_no_ccr ; YES - continue checking for ppO2 ENDIF TFT_color_code_depth_no_ccr: movff int_O_breathed_ppO2+1,WREG ; get upper byte of currently breathed ppO2 btfsc WREG,int_warning_flag ; is the warning flag set? bra TFT_color_code_depth_warn ; YES - animate in warning design ;bra TFT_color_code_depth_outside; NO - continue checking for outside ZHL16 model TFT_color_code_depth_outside: movff char_O_deco_warnings,WREG ; bank-safe copy of deco warnings btfsc WREG,outside_warning ; are we currently outside of the ZH-L16 model? bra TFT_color_code_depth_warn ; YES - activate depth warning btfsc WREG,outside_attention ; NO - are we near to outside of the ZH-L16 model? bra TFT_color_code_depth_att ; YES - activate depth attention ;bra TFT_color_code_depth_memo ; NO - select memo color and return ; Helper Functions - set colors and attention/warning flags TFT_color_code_depth_memo: bcf depth_color_warning ; terminate depth warning bcf depth_color_attention ; terminate depth attention FONT_COLOR_MEMO ; select color return ; done TFT_color_code_depth_warn: bsf depth_color_warning ; activate depth warning bcf depth_color_attention ; terminate depth attention FONT_COLOR_WARNING ; select warning color return ; done TFT_color_code_depth_att: bcf depth_color_warning ; terminate depth warning bsf depth_color_attention ; activate depth attention FONT_COLOR_ATTENTION ; select attention return ; done ;----------------------------------------------------------------------------- ; Color-Code a CNS Value ; ; Input hi:lo CNS value [%] ; global TFT_color_code_cns TFT_color_code_cns: btfss hi,int_invalid_flag ; is the invalid flag set? bra TFT_color_code_cns_1 ; NO bcf hi,int_invalid_flag ; YES - clear invalid flag bcf hi,int_warning_flag ; - clear warning flag (it may be set) bcf hi,int_attention_flag ; - clear attention flag (it may be set) FONT_COLOR_DISABLED ; - select disabled color return ; - done TFT_color_code_cns_1: btfss hi,int_warning_flag ; is the warning flag set? bra TFT_color_code_cns_2 ; NO bcf hi,int_warning_flag ; YES - clear warning flag bcf hi,int_attention_flag ; - clear attention flag (it may be set) FONT_COLOR_WARNING ; - select warning color return ; - done TFT_color_code_cns_2: btfss hi,int_attention_flag ; is the attention flag set? bra TFT_color_code_cns_3 ; NO - select memo color bcf hi,int_attention_flag ; YES - clear attention flag FONT_COLOR_ATTENTION ; - select attention color return ; - done TFT_color_code_cns_3: FONT_COLOR_MEMO ; select memo color return ; done ;----------------------------------------------------------------------------- ; Color-Code a Supersaturation Value ; ; Input hi:lo CNS value [%] ; ; with int_O_lead_supersat, the upper byte is solely used for the flags ; and not for the value, thus there is no need to clear the flags ; TFT_color_code_supersat: movf pallet_color_memo,W ; load memo color by default btfsc hi,int_attention_flag ; is the attention flag set? movf pallet_color_attention,W ; YES - replace by attention color btfsc hi,int_warning_flag ; is the warning flag set? movf pallet_color_warning,W ; YES - replace by warning color btfsc hi,int_invalid_flag ; is the invalid flag set? movf pallet_color_disabled,W ; YES - replace by disabled color movwf font_color ; set font color return ; done ;----------------------------------------------------------------------------- ; Color-Code a ppO2 Value by its warning flags (16 bit) ; ; Input hi:lo ppO2 value [cbar] ; TFT_color_code_ppo2: btfss hi,int_warning_flag ; is the warning flag set? bra TFT_color_code_ppo2_1 ; NO bcf hi,int_warning_flag ; YES - clear warning flag bcf hi,int_attention_flag ; - clear attention flag (it may be set) bcf hi,int_high_flag ; - clear high warning flag (it may be set) bcf hi,int_low_flag ; - clear low warning flag (it may be set) FONT_COLOR_WARNING ; - select warning color return ; - done TFT_color_code_ppo2_1: btfss hi,int_attention_flag ; is the attention flag set? bra TFT_color_code_ppo2_2 ; NO bcf hi,int_attention_flag ; YES - clear attention flag (it may be set) bcf hi,int_high_flag ; - clear high warning flag (it may be set) bcf hi,int_low_flag ; - clear low warning flag (it may be set) FONT_COLOR_ATTENTION ; - select to attention color return ; - done TFT_color_code_ppo2_2: bcf hi,int_high_flag ; clear high warning flag (it may be set) bcf hi,int_low_flag ; clear low warning flag (it may be set) FONT_COLOR_MEMO ; select memo color return ; done IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Color-Code a ppO2 Value by its warning flags (8 bit) ; ; Input lo ppO2 value [cbar] ; TFT_color_code_ppo2_hud: movff char_O_deco_info,WREG ; get the deco info vector btfss WREG,deco_mode ; in deco? bra TFT_color_code_ppo2_hud_a ; NO - load normal max value as threshold movff char_I_ppO2_max_deco,WREG ; YES - load deco max value as threshold bra TFT_color_code_ppo2_hud_b ; continue TFT_color_code_ppo2_hud_a: movff char_I_ppO2_max_work,WREG ; ppO2 max while in working phase ;bra TFT_color_code_ppo2_hud_b ; continue TFT_color_code_ppo2_hud_b: cpfsgt lo ; lo > threshold? bra TFT_color_code_ppo2_hud1 ; NO - continue with checking for ppO2 low FONT_COLOR_WARNING ; YES - set warning color return ; - done TFT_color_code_ppo2_hud1: movff opt_dive_mode,WREG ; 0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=PSCR decfsz WREG,F ; in CCR mode? bra TFT_color_code_ppo2_hud_nocc; NO - check with ppO2 min for OC mode btfsc bailout_mode ; YES - in bailout mode? bra TFT_color_code_ppo2_hud_nocc; YES - check with ppO2 min for OC mode movff char_I_ppO2_min_loop,WREG ; NO - check with ppO2 min for loop mode bra TFT_color_code_ppo2_hud_com ; - continue with common part TFT_color_code_ppo2_hud_nocc: movff char_I_ppO2_min,WREG ; get ppO2 min for all other modes ;bra TFT_color_code_ppo2_hud_com ; continue with common part TFT_color_code_ppo2_hud_com: cpfslt lo ; lo < char_I_ppO2_min? bra TFT_color_code_ppo2_hud_com1; NO - set memo color FONT_COLOR_WARNING ; YES - set warning color return ; - done TFT_color_code_ppo2_hud_com1: FONT_COLOR_MEMO ; select memo color return ; done ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; Color-Code the Battery Level ; ; Input battery_low_condition battery status flag ; TFT_color_code_battery: movf pallet_color_memo,W ; get memo color by default btfsc battery_low_condition ; battery low condition detected? movf pallet_color_warning,W ; YES - switch to warning color movwf font_color ; set font color return ; done ;----------------------------------------------------------------------------- ; Color-Code according to Gas Number ; ; Input WREG gas number ; global TFT_color_code_gas TFT_color_code_gas: movwf up ; copy gas number (1-6) to up movlw color_white ; default color dcfsnz up,F ; gas 1 ? movlw color_white ; YES - color for gas 1 dcfsnz up,F ; gas 2 ? movlw color_green ; YES - color for gas 2 dcfsnz up,F ; gas 3 ? movlw color_red ; YSE - color for gas 3 dcfsnz up,F ; gas 4 ? movlw color_yellow ; YES - color for gas 4 dcfsnz up,F ; gas 5 ? movlw color_cyan ; YES - color for gas 5 dcfsnz up,F ; gas 6 ? movlw color_pink ; YES - color for gas 6 movwf font_color ; set color return ; done ;============================================================================= tft_out3 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Surface Mode Screen - current Time ; global TFT_surfmode_time TFT_surfmode_time: WIN_SMALL surf_clock_column+.7,surf_clock_row FONT_COLOR_MEMO ; set color SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of date and time movff rtc_latched_hour,lo ; get hours output_99 ; print hours (0-99) movlw ':' ; load a ":" movff rtc_latched_secs,lo ; get seconds btfss lo,0 ; on even second? movlw ' ' ; NO - load a space char movwf POSTINC2 ; print ":" or space char movff rtc_latched_mins,lo ; get minutes output_99x ; print minutes (00-99) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Mode Screen - current Date ; global TFT_surfmode_date TFT_surfmode_date: WIN_SMALL surf_date_column,surf_date_row FONT_COLOR_MEMO ; set color SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of date and time movff rtc_latched_year, lo ; copy year to lo movff rtc_latched_month,hi ; copy month to hi movff rtc_latched_day, up ; copy day to up call output_date ; print date PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Mode Screen - show Pressure, on condition deltaP > threshold ; global TFT_surfmode_pres_fast TFT_surfmode_pres_fast: SMOVII pressure_abs, sub_a ; ISR-safe 2 byte copy of current absolute pressure to sub_a MOVII pressure_abs_ref,sub_b ; standard 2 byte copy 10 min ago absolute pressure to sub_b call subU16 ; sub_c = | sub_a - sub_b | = deltaP tstfsz sub_c+1 ; deltaP > 255 mbar ? bra TFT_pres_surfmode_fast_1 ; YES - show current pressure movlw pressure_noise_threshold+.1 ; NO - load noise suppression threshold subwf sub_c+0,W ; - subtract threshold from deltaP bc TFT_pres_surfmode_fast_1 ; - result negative -> show current pressure tstfsz pressure_update_lag_counter ; - still in lag time? bra TFT_pres_surfmode_fast_0 ; YES - continue updating the display return ; NO - no display updates any more, done TFT_pres_surfmode_fast_0: decf pressure_update_lag_counter,F ; clock down lag time counter bra TFT_surfmode_pres ; update display TFT_pres_surfmode_fast_1: movlw pressure_noise_lag_time ; get lag time movwf pressure_update_lag_counter ; re-set lag time counter ;bra TFT_surfmode_pres ; update display ;----------------------------------------------------------------------------- ; Surface Mode Screen - show Pressure (unconditional) ; global TFT_surfmode_pres TFT_surfmode_pres: ; value WIN_SMALL surf_press_column+.8,surf_press_row FONT_COLOR_MEMO ; set color SMOVII pressure_abs,mpr ; get current pressure FONT_COLOR_MEMO ; print in standard color output_9999 ; print (0-9999) PRINT ; dump buffer to screen ; unit WIN_SMALL surf_press_column+(4+1)*8,surf_press_row FONT_COLOR_MASK ; switch to mask color STRCPY_TEXT_PRINT tMBAR ; print unit (hPa) return ; done ;----------------------------------------------------------------------------- ; Surface Mode Screen - Temperature ; global TFT_surfmode_temp TFT_surfmode_temp: ; unit WIN_SMALL surf_temp_column+3*8,surf_temp_row FONT_COLOR_MASK ; select mask color TSTOSS opt_units ; 0=°C, 1=°F bra TFT_temp_surfmode_metric ; 0: metric ;bra TFT_temp_surfmode_imperial ; 1: imperial TFT_temp_surfmode_imperial: STRCAT_TEXT tLogTunitF ; print "°F" bra TFT_temp_surfmode_common ; continue with common part TFT_temp_surfmode_metric: STRCAT_TEXT tLogTunitC ; print "°C" ;bra TFT_temp_surfmode_common ; continue with common part TFT_temp_surfmode_common: PRINT ; dump the unit to screen ; value WIN_SMALL surf_temp_column,surf_temp_row bra TFT_temp_common ; continue with common part ; Helper Function - common output for surface and dive mode temperature TFT_temp_common: FONT_COLOR_MEMO ; set color SMOVII temperature_cur,mpr ; ISR-safe 2 byte copy of current temperature to hi:lo ; DEBUG CODE - manual override temp ; ----------------------------------- ; MOVLI 0xFFF6,mpr ; - 1.0 °C ; MOVLI 0xFF9C,mpr ; -10.0 °C TSTOSC opt_units ; 0=°C, 1=°F call convert_celsius_to_fahrenheit;1 - convert value in lo:hi from Celsius to Fahrenheit call convert_signed_16bit ; convert lo:hi into signed-short and print '-' if negative btfsc neg_flag ; is the temperature negative? bsf hide_digit4 ; YES - do not print digit 4 bsf omit_digit_1 ; do not print digit 1 (0.1°) output_9999 ; print temperature (0x-999x / 0x-99x if negative) btfss divemode ; in dive mode? bra TFT_temp_common_no_unit ; NO - no unit to append TSTOSS opt_units ; YES - check unit type: 0=°C, 1=°F bra TFT_temp_common_metric ; 0 - metric ;bra TFT_temp_common_imperial ; 1 - imperial TFT_temp_common_imperial: STRCAT_TEXT_PRINT tLogTunitF ; append "°F" and dump to screen return ; done TFT_temp_common_metric: STRCAT_TEXT_PRINT tLogTunitC ; append "°C" and dump to screen return ; done TFT_temp_common_no_unit: PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Mode Screen - Battery Status ; global TFT_surfmode_batt TFT_surfmode_batt: FONT_COLOR_MEMO ; set default color ; apply charging indicator and warnings clrf WREG ; default to no indication/warning btfsc cc_active ; charging in CC mode? movlw color_yellow ; YES - set output color to yellow btfsc cv_active ; charging in CV mode? movlw color_green ; YES - set output color to green btfsc battery_low_condition ; battery low condition detected? movf pallet_color_warning,W ; YES - set output to warning color btfsc battery_overtemp ; battery over-temperature detector tripped? movf pallet_color_warning,W ; YES - set output to warning color tstfsz WREG ; any indicator or warning active? bsf win_invert ; YES - set output to inverse tstfsz WREG ; any indicator or warning active (asked again)? movwf font_color ; YES - change color WIN_SMALL batt_percent_column+.2,batt_percent_row movff batt_percent,lo ; get battery % output_256 ; print battery % (0-255) STRCAT_PRINT "% " ; append unit with trailing space and dump to screen WIN_TINY batt_voltage_column+.15,batt_voltage_row FONT_COLOR_MEMO ; set color movff battery_type,lo ; get battery type PUTC "T" ; print "T" output_9 ; print battery type code (0-9) PUTC ":" ; print ":" MOVII batt_voltage,mpr ; get battery voltage bsf omit_digit_2 ; do not print 2nd and 1st digit bsf decimal_digit3 ; place a decimal point in front of digit 3 output_9999 ; print x.x-- PUTC_PRINT 'V' ; append unit and dump to screen return ; done ;update_battery_debug: ; FONT_COLOR_MEMO ; WIN_TINY .70,.0 ; movff battery_gauge+5,xC+3 ; movff battery_gauge+4,xC+2 ; movff battery_gauge+3,xC+1 ; movff battery_gauge+2,xC+0 ; ; battery_gauge:6 is nAs ; ; devide through 65536 ; ; devide through 152 ; ; Result is 0.01Ah in xC+1:xC+0 ; MOVLI .152,xB ; call div32x16 ; xC:4 = xC:4 / xB:2 with xA as remainder ; MOVII xC,mpr ; bsf leftbind ; output_65535 ; STRCAT_PRINT "x.01Ah" ; return ;----------------------------------------------------------------------------- ; Surface Mode Screen - Deco Mode (0=OC, 1=CCR, 2=Gauge, 3=Apnoe, 4=pSCR) ; global TFT_surfmode_decotype TFT_surfmode_decotype: WIN_STD surf_decotype_column,surf_decotype_row FONT_COLOR color_lightblue ; set font color movff opt_dive_mode,lo ; get deco mode tstfsz lo ; in OC mode? bra TFT_decotype_surface_2 ; NO STRCAT_TEXT_PRINT tDvOC ; YES - print OC return ; - done TFT_decotype_surface_2: decfsz lo,F ; in CCR mode? bra TFT_decotype_surface_3 ; NO IFDEF _ccr_pscr STRCAT_TEXT_PRINT tDvCC ; YES - print CCR WIN_TINY surf_decotype_column+.18,surf_decotype_row+.12 FONT_COLOR_MEMO ; - set color movff opt_ccr_mode,WREG ; - ccr mode tstfsz WREG ; - ccr_mode = 0 (FixedSP) ? bra TFT_surfmode_decotype_cc_var; NO - not fixed ;bra TFT_surfmode_decotype_cc_fix; YES - fixed TFT_surfmode_decotype_cc_fix: STRCPY_TEXT tCCRModeFixedSP ; print "fixed SP" bra TFT_decotype_surface_cc_com ; continue TFT_surfmode_decotype_cc_var: ; Sensor or Auto SP mode sublw .2 ; ccr_mode = 2 (Auto SP) ? bz TFT_decotype_surface_cc_auto; YES - AutoSP IFDEF _external_sensor STRCPY_TEXT tCCRModeSensor ; NO - print "Sensor" bra TFT_decotype_surface_cc_com ; - continue ENDIF ; _external_sensor TFT_decotype_surface_cc_auto: STRCPY_TEXT tCCRModeAutoSP ; print "Auto SP" ;bra TFT_decotype_surface_cc_com ; continue TFT_decotype_surface_cc_com: clrf WREG ; load string terminator movff WREG,buffer+.8 ; limit string length to 8 PRINT ; dump to screen return ; done ENDIF ; _ccr_pscr TFT_decotype_surface_3: decfsz lo,F ; in gauge mode? bra TFT_decotype_surface_4 ; NO STRCAT_TEXT_PRINT tDvGauge ; YES - print "Gauge" return ; - done TFT_decotype_surface_4: decfsz lo,F ; in apnea mode? bra TFT_decotype_surface_5 ; NO STRCAT_TEXT_PRINT tDvApnea ; YES - print "Apnoe" return ; - done TFT_decotype_surface_5: STRCAT_TEXT_PRINT tDvPSCR ; print "pSCR" return ; done ;----------------------------------------------------------------------------- ; Surface Mode Screen - small Gas List ; global TFT_surfmode_startgas TFT_surfmode_startgas: ; FIRST gas WIN_SMALL surf_decotype_column+.1,surf_decotype_row+.30 FONT_COLOR_MEMO ; set font color call get_first_gas_to_WREG ; get first gas (1-5) into WREG decf WREG,W ; 1-5 -> 0-4 movwf PRODL ; copy to PRODL call gaslist_strcat_mix_PRODL ; print gas description PRINT ; dump to screen ; show gases WIN_TOP surf_decotype_row+.30+.25 ; set row position ; 1st gas WIN_LEFT surf_decotype_boxes_left1+.1 movff opt_gas_type+0,hi ; 0=Disabled, 1=First, 2=Travel, 3=Deco rcall TFT_surfmode_startgas_helper; set font color STRCPY_PRINT "1" ; print "1" decfsz hi,F ; Type = 1 (First)? bra TFT_surfmode_startgas_2 ; NO - skip box WIN_FRAME_STD surf_decotype_boxes_top, surf_decotype_boxes_bottom, surf_decotype_boxes_left1, surf_decotype_boxes_left1+.8 ; 2nd gas TFT_surfmode_startgas_2: WIN_LEFT surf_decotype_boxes_left2+.1 movff opt_gas_type+1,hi ; 0=Disabled, 1=First, 2=Travel, 3=Deco rcall TFT_surfmode_startgas_helper; set font color STRCPY_PRINT "2" ; print "2" decfsz hi,F ; Type = 1 (First)? bra TFT_surfmode_startgas_3 ; NO - skip box WIN_FRAME_STD surf_decotype_boxes_top, surf_decotype_boxes_bottom, surf_decotype_boxes_left2, surf_decotype_boxes_left2+.8 ; 3rd gas TFT_surfmode_startgas_3: WIN_LEFT surf_decotype_boxes_left3+.1 movff opt_gas_type+2,hi ; 0=Disabled, 1=First, 2=Travel, 3=Deco rcall TFT_surfmode_startgas_helper; set font color STRCPY_PRINT "3" ; print "3" decfsz hi,F ; Type = 1 (First)? bra TFT_surfmode_startgas_4 ; NO - skip box WIN_FRAME_STD surf_decotype_boxes_top, surf_decotype_boxes_bottom, surf_decotype_boxes_left3, surf_decotype_boxes_left3+.8 ; 4th gas TFT_surfmode_startgas_4: WIN_LEFT surf_decotype_boxes_left4+.1 movff opt_gas_type+3,hi ; 0=Disabled, 1=First, 2=Travel, 3=Deco rcall TFT_surfmode_startgas_helper; set font color STRCPY_PRINT "4" ; print "4" decfsz hi,F ; Type = 1 (First)? bra TFT_surfmode_startgas_5 ; NO - skip box WIN_FRAME_STD surf_decotype_boxes_top, surf_decotype_boxes_bottom, surf_decotype_boxes_left4, surf_decotype_boxes_left4+.8 ; 5th gas TFT_surfmode_startgas_5: WIN_LEFT surf_decotype_boxes_left5+.1 movff opt_gas_type+4,hi ; 0=Disabled, 1=First, 2=Travel, 3=Deco rcall TFT_surfmode_startgas_helper; set font color STRCPY_PRINT "5" ; print "5" decfsz hi,F ; type = 1 (First)? return ; NO - done WIN_FRAME_STD surf_decotype_boxes_top, surf_decotype_boxes_bottom, surf_decotype_boxes_left5, surf_decotype_boxes_left5+.8 return ; done ; Helper Function - set font color TFT_surfmode_startgas_helper: movf pallet_color_disabled,W ; set default color tstfsz hi ; gas not disabled? movf pallet_color_memo,W ; YES - change to memo color movwf font_color ; set font color return IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Surface Mode Screen - Tank Pressure Reading above Surface Pressure ; global TFT_surfmode_tankpres TFT_surfmode_tankpres: WIN_SMALL surf_decotype_column+.6,surf_decotype_row+.30+.47 movff int_IO_pressure_value+0,lo ; copy pressure from 1st reading to hi:lo movff int_IO_pressure_value+1,hi ; ... btfss hi,int_not_avail_flag ; pressure reading 1 available? bra TFT_surface_tank_pres_0 ; YES movff int_IO_pressure_value+2,lo ; NO - copy pressure from 2nd reading to hi:lo movff int_IO_pressure_value+3,hi ; - ... btfsc hi,int_not_avail_flag ; - pressure reading 2 available? bra TFT_surface_tank_pres_1 ; NO - show not avail message TFT_surface_tank_pres_0: call TFT_color_code_pres_sac ; set output color according to flags bsf omit_digit_1 ; do not print 1st digit (0.1 bar) output_9999 ; print (0x-999x) PRINT ; dump to screen bra TFT_surface_tank_pres_2 ; print unit TFT_surface_tank_pres_1: FONT_COLOR_DISABLED ; select disabled color STRCAT_PRINT " ---" ; output for no pressure data available TFT_surface_tank_pres_2: WIN_SMALL surf_decotype_column+.38,surf_decotype_row+.30+.47 FONT_COLOR_MASK ; select mask color STRCAT_PRINT "bar" ; can not use tbar because it has a leading space return ; done ENDIF ; _rx_functions ;============================================================================= tft_out4 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Imprint the Color Schemes ; global TFT_imprint_color_schemes TFT_imprint_color_schemes: call TFT_load_dive_color_pallet ; load dive mode color pallet FONT_COLOR_MASK ; select mask color WIN_TINY .12,.40 ; print labels STRCAT_TEXT_PRINT tDepth ; ... WIN_TINY .62,.40 ; ... STRCAT_TEXT_PRINT tMaxDepth ; ... WIN_TINY .122,.40 ; ... STRCAT_TEXT_PRINT tDivetime ; ... FONT_COLOR_DISABLED ; select disabled color ; max. depth demo WIN_MEDIUM .64,.54 ; set font and position movlw .63 ; load demo depth movwf lo ; ... output_99 ; print full meters (0-99) PRINT ; dump to screen WIN_SMALL .87,.66 ; set font and position PUTC "." ; print ":" movlw .4 ; load demo depth movwf lo ; ... output_9 ; print decimeters (0-9) PRINT ; dump to screen FONT_COLOR_MEMO ; select memo color ; depth demo WIN_MEDIUM .3,.54 ; set font and position movlw .17 ; load a demo depth movwf lo ; ... output_99 ; print full meters (0-99) PRINT ; dump to screen WIN_SMALL .25,.66 ; set font and position PUTC "." ; print ":" movlw .5 ; load demo depth movwf lo ; ... output_9 ; print decimeters (0-9) PRINT ; dump to screen ; dive time demo WIN_MEDIUM .103, .54 ; set font and position SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of date and time movff rtc_latched_mins,lo ; get minutes output_256 ; print minutes (in 3 digits, 1st digit used as spacer) PRINT ; dump to screen WIN_SMALL .139, .66 ; set font and position PUTC ':' ; print ":" movff rtc_latched_secs,lo ; get seconds output_99x ; print seconds (00-99) PRINT ; dump to screen ; messages demo WIN_SMALL dm_warning1_column-.78, dm_warning1_row+.39+.12 FONT_COLOR_ADVICE ; select advice color STRCPY_TEXT_PRINT tgaschange ; sample text "Change?" WIN_SMALL dm_warning1_column, dm_warning1_row+.39 FONT_COLOR_ATTENTION ; select attention color STRCPY_TEXT_PRINT tCNSeod ; sample text "CNS final" WIN_SMALL dm_warning2_column, dm_warning2_row+.38 FONT_COLOR_WARNING ; select warning color STRCPY_TEXT_PRINT tGasNeedsWarn ; sample text "Gas Needs" call TFT_load_std_color_pallet ; re-load standard color pallet return ; done ;----------------------------------------------------------------------------- ; Surface Menu - Imprint Time & Date ; global TFT_imprint_time_date TFT_imprint_time_date: SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of current date & time ;bra TFT_imprint_time_date_fast ; continue ;----------------------------------------------------------------------------- ; Surface Menu - Imprint Time & Date - fast Updating ; global TFT_imprint_time_date_fast TFT_imprint_time_date_fast: WIN_SMALL .20,.40 ; column, row - keep clear of the cursor area on the left! FONT_COLOR_MEMO ; select color movff rtc_latched_hour,lo ; get hours output_99 ; print hours (0-99) PUTC ':' ; print ":" movff rtc_latched_mins,lo ; get minutes output_99x ; print minutes (00-99) PUTC ':' ; print ":" movff rtc_latched_secs,lo ; get seconds output_99x ; print seconds (00-99) STRCAT " " ; append two spaces movff rtc_latched_year, lo ; get date movff rtc_latched_month,hi ; ... movff rtc_latched_day, up ; ... call output_date ; print date PUTC_PRINT " " ; append a space and dump to screen return ; done IFDEF _external_sensor ;----------------------------------------------------------------------------- ; Surface Mode - Imprint ppO2 from Sensors ; global TFT_imprint_surf_ppO2 TFT_imprint_surf_ppO2: TFT_imprint_surf_ppO2_1: WIN_SMALL surf_hud_sensor1_column,surf_hud_sensor1_row btfsc sensor1_calibrated_ok ; sensor calibrated? bra TFT_imprint_surf_ppO2_1a ; YES btfsc sensor1_active ; NO - valid HUD data for this sensor? bra TFT_imprint_surf_ppO2_1a ; YES rcall TFT_imprint_surf_ppO2_h2 ; NO - print dashes bra TFT_imprint_surf_ppO2_2 ; - continue with sensor 2 TFT_imprint_surf_ppO2_1a: movff sensor1_ppO2,lo ; get ppO2 rcall TFT_imprint_surf_ppO2_h1 ; print ppO2 TFT_imprint_surf_ppO2_2: WIN_SMALL surf_hud_sensor2_column,surf_hud_sensor2_row btfsc sensor2_calibrated_ok ; sensor calibrated? bra TFT_imprint_surf_ppO2_2a ; YES btfsc sensor2_active ; NO - valid HUD data for this sensor bra TFT_imprint_surf_ppO2_2a ; YES rcall TFT_imprint_surf_ppO2_h2 ; NO - print dashes bra TFT_imprint_surf_ppO2_3 ; - continue with sensor 3 TFT_imprint_surf_ppO2_2a: movff sensor2_ppO2,lo ; get ppO2 rcall TFT_imprint_surf_ppO2_h1 ; print ppO2 TFT_imprint_surf_ppO2_3: WIN_SMALL surf_hud_sensor3_column,surf_hud_sensor3_row btfsc sensor3_calibrated_ok ; sensor calibrated? bra TFT_imprint_surf_ppO2_3a ; YES btfsc sensor3_active ; NO - valid HUD data for this sensor bra TFT_imprint_surf_ppO2_3a ; YES bra TFT_imprint_surf_ppO2_h2 ; NO - print dashes and return return ; - done TFT_imprint_surf_ppO2_3a: movff sensor3_ppO2,lo ; get ppO2 ;bra TFT_imprint_surf_ppO2_h1 ; print ppO2 and return TFT_imprint_surf_ppO2_h1: call TFT_color_code_ppo2_hud ; color-code with ppO2 [cbar] in lo bsf decimal_digit2 ; place a decimal point in front of digit 2 output_256 ; print (0.00-2.55) PRINT ; dump to screen return ; done TFT_imprint_surf_ppO2_h2: FONT_COLOR_MEMO ; select standard color STRCPY_PRINT "--- " ; print dashes return ; done ;----------------------------------------------------------------------------- ; Surface Mode - Imprint mV from Sensors ; global TFT_imprint_surf_mV TFT_imprint_surf_mV: FONT_COLOR_MEMO ; set font color ; sensor 1 WIN_SMALL surf_mV_sensor_column,surf_mV_sensor1_row SMOVII sensor1_mv,mpr ; in 0.1mV steps STRCAT "1: " ; print number rcall TFT_sensor_mV_helper ; print mV ; sensor 2 WIN_SMALL surf_mV_sensor_column,surf_mV_sensor2_row SMOVII sensor2_mv,mpr ; in 0.1mV steps STRCAT "2: " ; print number rcall TFT_sensor_mV_helper ; sensor 3 WIN_SMALL surf_mV_sensor_column,surf_mV_sensor3_row SMOVII sensor3_mv,mpr ; in 0.1mV steps STRCAT "3: " ; print number rcall TFT_sensor_mV_helper ; print mV ; print sensor connection type WIN_SMALL surf_mV_sensor_column,surf_mV_sensor3_row+.24 btfsc ext_input_optical ; optical input? bra TFT_sensor_mV_optical ; YES TSTOSS opt_s8_mode ; NO - S8 input selected? bra TFT_sensor_mV_analog ; NO - analog input ;bra TFT_sensor_mV_s8 ; YES - S8 TFT_sensor_mV_s8: STRCAT_PRINT "Digital" ; print "Digital" return ; done TFT_sensor_mV_optical: STRCAT_PRINT "Optical" ; print "Optical" return ; done TFT_sensor_mV_analog: STRCAT_PRINT "Analog" ; print "analog" return ; done ; Helper Function - print mV value TFT_sensor_mV_helper: bsf decimal_digit1 ; place a decimal point in front of digit 1 output_9999 ; print (0.0-999.9) STRCAT_PRINT "mV " ; append unit and dump buffer to screen return ; done ;----------------------------------------------------------------------------- ; Surface Mode - Imprint End-of-Life from Sensors ; ; when opt_x_sx > 255 the sensor will just give 8 mV at a ppO2 of 0.21 ; global TFT_imprint_surf_sensor_eol TFT_imprint_surf_sensor_eol: FONT_COLOR_WARNING ; set color TFT_imprint_surf_eol_1: ; sensor 1 btfss sensor1_calibrated_ok ; valid calibration? bra TFT_imprint_surf_eol_2 ; NO - skip movff opt_x_s1+1,WREG ; YES - get high(opt_x_s1) movf WREG,W ; - excite flags bz TFT_imprint_surf_eol_2 ; - opt_x_s1 > 255 -> the sensor is not too bad yet for a warning WIN_SMALL surf_mV_sensor_status_column,surf_mV_sensor1_row-.5 STRCPY_PRINT "\xb8" ; mark sensor as being at end of lifetime TFT_imprint_surf_eol_2: ; sensor 2 btfss sensor2_calibrated_ok ; valid calibration? bra TFT_imprint_surf_eol_3 ; NO - skip movff opt_x_s2+1,WREG ; YES - get high(opt_x_s2) movf WREG,W ; - excite flags bz TFT_imprint_surf_eol_3 ; - opt_x_s2 > 255 -> the sensor is not too bad yet for a warning WIN_SMALL surf_mV_sensor_status_column,surf_mV_sensor2_row-.5 STRCPY_PRINT "\xb8" ; mark sensor as being at end of lifetime TFT_imprint_surf_eol_3: ; sensor 3 btfss sensor3_calibrated_ok ; valid calibration? bra TFT_imprint_surf_eol_4 ; NO - skip movff opt_x_s3+1,WREG ; YES - get high(opt_x_s3) movf WREG,W ; - excite flags bz TFT_imprint_surf_eol_4 ; - opt_x_s3 > 255 -> the sensor is not too bad yet for a warning WIN_SMALL surf_mV_sensor_status_column,surf_mV_sensor3_row-.5 STRCPY_PRINT "\xb8" ; mark sensor as being at end of lifetime TFT_imprint_surf_eol_4: return ; done ;----------------------------------------------------------------------------- ; Imprint Function for the Calibration Menu ; global TFT_imprint_menu_mV TFT_imprint_menu_mV: FONT_COLOR color_yellow ; show in yellow rcall TFT_sensor_mv_get ; get sensor mV values ; sensor 1 WIN_SMALL surf_menu_sensor1_column,surf_menu2_sensor1_row SMOVII sensor1_mv,mpr ; in 0.1mV steps rcall TFT_imprint_menu_mV_helper ; print mV value ; sensor 2 WIN_SMALL surf_menu_sensor2_column,surf_menu2_sensor2_row SMOVII sensor2_mv,mpr ; in 0.1mV steps rcall TFT_imprint_menu_mV_helper ; print mV value ; sensor 3 WIN_SMALL surf_menu_sensor3_column,surf_menu2_sensor3_row SMOVII sensor3_mv,mpr ; in 0.1mV steps rcall TFT_imprint_menu_mV_helper ; print mV value TSTOSS opt_s8_mode ; =0: analog, =1: digital return ; analog - done ; imprint HUD battery voltage WIN_TINY .20,.209 ; set position STRCPY "HUD Batt: " ; print label SMOVII hud_battery_mv,mpr ; get HUD battery voltage bsf decimal_digit3 ; place a decimal point in front of digit 3 output_9999 ; print (0.000-9.999) PUTC_PRINT "V" ; append unit and dump buffer to screen return ; done ; Helper Function - get sensor mV values TFT_sensor_mv_get: ; btfsc ext_input_optical ; do we have an optical interface? ; return ; YES - optical interface delivers ready-to-use mV data, done TSTOSS opt_s8_mode ; NO - S8 input selected? bra TFT_sensor_mv_get_ana ; NO - read analog inputs ;bra TFT_sensor_mv_get_dig ; YES - convert digitally received ppO2 into mV TFT_sensor_mv_get_dig: btfss trigger_S8_data_update ; new data frame received? return ; NO - use old values bcf trigger_S8_data_update ; YES - clear update flag call compute_mvolts_from_rawdata ; - compute mV values from received raw data return ; - done TFT_sensor_mv_get_ana: call get_analog_inputs ; read mV values from analog inputs return ; done ; Helper Function - print mV value TFT_imprint_menu_mV_helper: bsf decimal_digit1 ; place a decimal point in front of digit 1 (no 0.1 mV) output_9999 ; print (0.0-999.9) STRCAT_PRINT "mV" ; append unit and dump buffer to screen return ; done ENDIF ; _external_sensor IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Imprint Function for the Tank Setup Menu ; global TFT_imprint_tank_pres TFT_imprint_tank_pres: FONT_COLOR_MEMO ; set color ; get ID lfsr FSR1,opt_transmitter_id_1 ; load base address of opt_transmitter_id movf gaslist_gas,W ; get current gas rlncf WREG,W ; multiply by 2 because IDs are 2 byte in size movff PLUSW1,lo ; copy opt_transmitter_id+0[gaslist_gas] to lo incf WREG,W ; increment index movff PLUSW1,hi ; copy opt_transmitter_id+1[gaslist_gas] to hi ; show pressure WIN_SMALL .90, .61 ; column, row (+/- 27 per row) call get_pres_by_transmitter_id ; get pressure into hi:lo tstfsz WREG ; do we have valid tank data (WREG=0) ? bra TFT_menu_tank_pres_1 ; NO - transmitter not found call TFT_color_code_pres_sac ; set output color according to flags bsf omit_digit_1 ; do not print 1st digit (0.1 bar) output_9999 ; print (0x-999x) bra TFT_menu_tank_pres_2 TFT_menu_tank_pres_1: FONT_COLOR_DISABLED ; select color STRCAT " ---" ; print dashes for no pressure data available TFT_menu_tank_pres_2: STRCAT_TEXT_PRINT tbar ; print " bar" return ; done ENDIF ; _rx_functions ;============================================================================= tft_out5 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - static Layout ; global TFT_show_divemode_mask TFT_show_divemode_mask: ; display mask in dive mode FONT_COLOR_MASK ; select color ; current depth WIN_TINY dm_mask_depth_column,dm_mask_depth_row ; position for "Depth" btfss alt_layout_active ; alternative layout active? bra TFT_divemode_mask_depth_text ; NO btfsc cur_depth_greater_100m ; YES - current depth >= 100 m? bra TFT_divemode_mask_max_avg ; YES - skip depth label as it collides with depth number WIN_TINY dm_mask_depth_column_alt,dm_mask_depth_row ; NO - set alternative position for "Depth" TFT_divemode_mask_depth_text: STRCAT_TEXT_PRINT tDepth ; print "Depth" TFT_divemode_mask_max_avg: ; avg or max depth btfsc alt_layout_active ; alternative layout active? bra TFT_divemode_mask_avg_max_alt ; YES WIN_TINY dm_mask_maxdepth_col_nvsi,dm_mask_maxdepth_row ; default position for "max.Depth"/"avg.Depth" TSTOSS opt_vsigraph ; graphical VSI bar enabled? bra TFT_divemode_mask_max_avg_pos ; NO - keep position WIN_TINY dm_mask_maxdepth_col,dm_mask_maxdepth_row ; YES - adopt position TFT_divemode_mask_max_avg_pos: btfsc FLAG_apnoe_mode ; in apnea mode? bra TFT_divemode_mask_max_text ; YES - always draw max depth TSTOSS opt_2ndDepthDisp ; NO - shall draw avg depth instead of max depth? bra TFT_divemode_mask_max_text ; NO - print "max.Depth" STRCAT_TEXT_PRINT tAvgDepth ; YES - print "avg.Depth" bra TFT_divemode_mask_time_pos ; - continue with dive time TFT_divemode_mask_max_text: STRCAT_TEXT_PRINT tMaxDepth ; print "max.Depth" bra TFT_divemode_mask_time_pos ; continue with dive time TFT_divemode_mask_avg_max_alt: btfss FLAG_gauge_mode ; in gauge mode? bra TFT_divemode_mask_time_pos ; NO - continue with dive time WIN_TINY dm_gauge_max_depth_text_col,dm_gauge_max_depth_text_row ; YES - set position STRCAT_TEXT_PRINT tMaxDepth ; - print "max.Depth" WIN_TINY dm_gauge_avg_depth_text_col,dm_gauge_avg_depth_text_row ; - set position STRCAT_TEXT_PRINT tDiveTotalAvg ; - print "Total Avg" ;bra TFT_divemode_mask_time_pos ; - continue with dive time ; dive time TFT_divemode_mask_time_pos: WIN_TINY dm_mask_divetime_column,dm_mask_divetime_row ; position for "Divetime" TFT_divemode_mask_time_text: STRCAT_TEXT_PRINT tDivetime ; print "Divetime" btfss FLAG_apnoe_mode ; in apnea mode? return ; NO - done WIN_TINY dm_total_apnoe_text_col,dm_total_apnoe_text_row; YES - set position STRCPY_TEXT_PRINT tApnoeTotal ; - print "Total" return ; - done ;----------------------------------------------------------------------------- ; Dive Mode - NDL Layout Add-on ; global TFT_show_ndl_mask TFT_show_ndl_mask: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort FONT_COLOR_MASK ; NO - set color ; - set position WIN_STD dm_ndl_text_column, dm_ndl_text_row STRCPY_TEXT_PRINT tNDL ; - print "NDL" btfss deco_region ; - was the dive within deco stops region? return ; NO - done btfsc safety_stop_active ; YES - safety stop shown? return ; YES - done goto TFT_show_slow_reminder ; NO - show "slow" reminder ;----------------------------------------------------------------------------- ; Dive Mode - Deco Layout Add-on ; global TFT_show_deco_mask TFT_show_deco_mask: bcf safety_stop_active ; flag safety stop is not shown any more TODO: needed? btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfsc alt_layout_active ; NO - in alternative layout? bra TFT_show_deco_mask_alt ; YES ;bra TFT_show_deco_mask_norm ; NO TFT_show_deco_mask_norm: WIN_STD dm_tts_text_col_norm, dm_tts_text_row_norm bra TFT_show_deco_mask_common ; continue with common part TFT_show_deco_mask_alt: WIN_TINY dm_tts_text_col_alt, dm_tts_text_row_alt STRCPY "Stop/" ; print "Stop/" ;bra TFT_show_deco_mask_common ; continue with common part TFT_show_deco_mask_common: FONT_COLOR_MASK ; set color STRCAT_TEXT_PRINT tTTS ; print "TTS" return ; done ;============================================================================= tft_out6 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - show Dive Time ; global TFT_show_divetime TFT_show_divetime: FONT_COLOR_MEMO ; set color SMOVTT counted_divetime_mins,mpr ; ISR-safe 3 byte copy of minutes:2 (mpr+1:mpr+0) and seconds (mpr+2) btfsc show_only_divemins ; shall suppress display of seconds? bra TFT_show_divetime_min_only ; YES - show minutes only movlw .99 ; NO - load 99 cpfsgt mpr+0 ; - dive time > 99 minutes ? bra TFT_show_divetime_min_sec ; NO - show min:sec bsf show_only_divemins ; YES - set flag to suppress the display of seconds for the rest of the dive btfsc alt_layout_active ; - in alternative layout? bra TFT_show_divetime_clear_alt ; YES - clear min:sec area of alternative layout ;bra TFT_show_divetime_clear_norm ; NO - clear min:sec area of normal layout TFT_show_divetime_clear_norm: WIN_BOX_BLACK dm_divetime_row, dm_divetime_bot_medium, dm_divetime_col_medium, dm_divetime_rgt ;top, bottom, left, right bra TFT_show_divetime_min_only_norm ; show minutes only TFT_show_divetime_clear_alt: WIN_BOX_BLACK dm_divetime_row, dm_divetime_bot_large, dm_divetime_col_large, dm_divetime_rgt ;top, bottom, left, right bra TFT_show_divetime_min_only_alt ; show minutes only TFT_show_divetime_min_sec: ; show the minutes btfsc alt_layout_active ; in alternative layout? bra TFT_show_divetime_min_alt ; YES ;bra TFT_show_divetime_min_norm ; NO TFT_show_divetime_min_norm: WIN_MEDIUM dm_divetime_col_medium, dm_divetime_row bra TFT_show_divetime_min_com ; continue with common part TFT_show_divetime_min_alt: WIN_LARGE dm_divetime_col_large, dm_divetime_row ;bra TFT_show_divetime_min_com ; continue with common part TFT_show_divetime_min_com: output_99 ; print minutes (0-99) PRINT ; dump buffer to screen ; show the seconds btfsc alt_layout_active ; in alternative layout? bra TFT_show_divetime_sec_alt ; YES ;bra TFT_show_divetime_sec_norm ; NO TFT_show_divetime_sec_norm: WIN_SMALL dm_divetime_sec_col_small, dm_divetime_sec_row_small bra TFT_show_divetime_sec_com ; continue with common part TFT_show_divetime_sec_alt: WIN_MEDIUM dm_divetime_sec_col_medium, dm_divetime_sec_row_medium ;bra TFT_show_divetime_sec_com ; continue with common part TFT_show_divetime_sec_com: PUTC ':' ; print separator char movff mpr+2,lo ; copy seconds to lo output_99x ; print seconds (00-99) bra TFT_divemins_exit ; continue with common part TFT_show_divetime_min_only: btfsc alt_layout_active ; in alternative layout? bra TFT_show_divetime_min_only_alt ; YES ;bra TFT_show_divetime_min_only_norm ; NO TFT_show_divetime_min_only_norm: WIN_MEDIUM dm_divetime_minonly_col_medium, dm_divetime_row output_9999 ; print minutes (0-9999) bra TFT_divemins_exit ; continue with common part TFT_show_divetime_min_only_alt: WIN_LARGE dm_divetime_minonly_col_large, dm_divetime_row output_999 ; print minutes (0-999) ;bra TFT_divemins_exit ; continue with common part TFT_divemins_exit: PRINT ; dump buffer to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - show current Depth ; global TFT_show_depth TFT_show_depth: MOVII pressure_rel_cur_cached,mpr ; copy relative pressure to MPR call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] call TFT_color_code_depth ; set warning / attention flags and color-code the output rcall TFT_depth_blink ; control animation (blinking) rcall TFT_depth_position_m_ft ; set output position for full meters/feet TSTOSS opt_units ; 0=m, 1=ft ? bra TFT_depth_metric ; 0 - metric ;bra TFT_depth_imperial ; 1 - imperial TFT_depth_imperial: MOVLI .30,sub_a ; load depth threshold of 30 cm (for showing 0 if shallower) MOVII mpr,sub_b ; get current depth call cmpU16 ; compute sub_a - sub_b = threshold - current depth btfss neg_flag ; shallower than 30 cm ? bra depth_0_feet ; YES - print a zero directly call convert_cm_to_feet ; NO - convert value in hi:lo from [cm] to [feet] output_999 ; - feet in large or huge font PRINT ; - dump to screen bra TFT_depth_exit ; - do some cleanup and show target depth if in simulator mode depth_0_feet: STRCAT_PRINT " 0" ; print a zero directly bra TFT_depth_exit ; do some cleanup and show target depth if in simulator mode TFT_depth_metric: bsf omit_digit_2 ; print depth in full meters, i.e. do not print 2nd and 1st digit output_9999 ; test-print depth for range up to 99.9 meter (0xx-99xx) btfsc output_overflow ; did the printing clip, i.e. deeper than 99.9 meter? bra TFT_depth_metric_100m ; YES - print depth in full meters only ; depth in meters and decimeters btfsc cur_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_depth_box_black ; YES - clear depth area btfsc cur_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_depth_position_m_ft ; re-set output position for full meters/feet bcf cur_depth_greater_100m ; current depth is now < 100 meter PRINT ; dump full meters to screen btfsc depth_inverse_last ; in inverse printing cycle? bsf win_invert ; YES - print inverse rcall TFT_depth_position_dm ; set output position for decimeters MOVLI .30,sub_a ; 30 mbar = 0.3 meter MOVII mpr,sub_b ; current depth call cmpU16 ; compare (sub_a - sub_b) btfss neg_flag ; current depth < 0.3 meter ? bra depth_0_decimeter ; YES - print a zero output_65535 ; NO - print full depth to buffer REINIT_BUFFER ; - re-initialize the output buffer PUTC "." ; - print a decimal point movff buffer+3,POSTINC2 ; - get and print the decimeters PRINT ; - dump to screen bra TFT_depth_exit ; - do some cleanup and show target depth if in simulator mode depth_0_decimeter: STRCAT_PRINT ".0" ; print a zero directly and dump buffer to screen bra TFT_depth_exit ; do some cleanup and show target depth if in simulator mode TFT_depth_metric_100m: ; full meters only btfss cur_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_depth_box_black ; NO - clear depth area btfss cur_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_depth_position_m_ft ; re-set output position for full meters/feet bsf cur_depth_greater_100m ; depth is >= 100 meter now REINIT_BUFFER ; re-initialize the output buffer bsf omit_digit_2 ; print depth in full meters, i.e. do not print 1st and 2nd digit output_65535 ; print depth for range >= 100 meter (0xx-655xx) PRINT ; dump to screen ;bra TFT_depth_exit ; do some cleanup and show target depth if in simulator mode TFT_depth_exit: btfss alt_layout_active ; alternative layout active? bra TFT_depth_exit_2 ; NO btfsc depth_inverse_last ; YES - was last output in inverse mode? bra TFT_depth_exit_2 ; YES - do not restore "Depth" as it collides with depth number btfsc cur_depth_greater_100m ; NO - current depth >= 100 m? bra TFT_depth_exit_2 ; YES ;bra TFT_depth_exit_1 ; NO TFT_depth_exit_1 WIN_TINY dm_mask_depth_column_alt,dm_mask_depth_row FONT_COLOR_MASK ; set color STRCAT_TEXT_PRINT tDepth ; restore "Depth" title TFT_depth_exit_2: btfss sensor_override_active ; pressure sensor override active (simulator mode)? return ; NO - done bra TFT_depth_target ; YES - show simulator target depth ; Helper Function - control animation (blinking) TFT_depth_blink: TSTOSS opt_depth_warn ; 0=standard, 1=blink return ; standard, done btfsc depth_color_last ; was there a warning or attention on the depth in the previous cycle? bra TFT_depth_blink_prev ; YES btfsc depth_color_warning ; NO - do we have a depth warning now? bra TFT_depth_blink_new ; YES - so we have a warning now but not previously btfsc depth_color_attention ; NO - do we have a depth attention now? bra TFT_depth_blink_new ; YES - so we have attention now but not previously bra TFT_depth_blink_none ; NO - no warning in previous cycle, no warning now, reset all flags TFT_depth_blink_prev: ; we had a warning or attention in previous cycle, check if we still have a warning or attention btfsc depth_color_warning ; do we still have a warning? bra TFT_depth_blink_prev_1 ; YES btfsc depth_color_attention ; NO - do we still have an attention? bra TFT_depth_blink_prev_1 ; YES ; we had a warning or attention before, but not now any more - clear depth area from previous color rcall TFT_depth_box_black ; NO - clear depth area ;bra TFT_depth_blink_none ; - reset all flags TFT_depth_blink_none: bcf depth_inverse_last ; memorize depth was printed in normal bcf depth_color_last ; memorize there was no warning or attention FONT_COLOR_MEMO ; select memo color return ; done TFT_depth_blink_prev_1: ; we had a warning or attention in previous cycle, and we still have a warning or attention btfss depth_inverse_last ; was the depth printed in inverse last time? bra TFT_depth_blink_set ; NO - print in inverse now bra TFT_depth_blink_reset ; YES - print in normal now TFT_depth_blink_new: ; we had no warning or attention in previous cycle, but now bsf depth_color_last ; memorize that the depth had a warning or attention ;bra TFT_depth_blink_set ; start with inverse display TFT_depth_blink_set: ; fill the area with respective color movf pallet_color_attention,W ; select attention color as default btfsc depth_color_warning ; do we have a warning? movf pallet_color_warning,W ; YES - replace with warning color rcall TFT_depth_box_color ; color depth area with color in WREG bsf win_invert ; print in inverse bsf depth_inverse_last ; memorize depth was printed in inverse return ; done TFT_depth_blink_reset: ; fill the area with black color rcall TFT_depth_box_black ; clear depth area bcf depth_inverse_last ; memorize depth was printed in normal return ; done ; Helper Function - set output position for full meters/feet TFT_depth_position_m_ft: ; output position meters / feet btfsc alt_layout_active ; alternative layout active? bra TFT_depth_position_m_ft_alt ; YES ;bra TFT_depth_position_m_ft_norm; NO TFT_depth_position_m_ft_norm: WIN_LARGE dm_depth_col_large,dm_depth_row_large return ; done TFT_depth_position_m_ft_alt: WIN_HUGE dm_depth_col_huge, dm_depth_row_huge return ; done ; Helper Function - set output position for decimeters TFT_depth_position_dm: ; output position decimeters btfsc alt_layout_active ; alternative layout active? bra TFT_depth_position_dm_alt ; YES bra TFT_depth_position_dm_norm ; NO TFT_depth_position_dm_norm: WIN_MEDIUM dm_depth_dm_col_medium, dm_depth_dm_row_medium return ; done TFT_depth_position_dm_alt: WIN_LARGE dm_depth_dm_col_large, dm_depth_dm_row_large return ; done ; Helper Function - clear depth area TFT_depth_box_black: clrf WREG ; select black color ;bra TFT_depth_box_color ; continue with colored box ; Helper Function - color depth area with color in WREG TFT_depth_box_color: btfsc alt_layout_active ; alternative layout active? bra TFT_depth_box_alt ; YES ;bra TFT_depth_box_norm ; NO TFT_depth_box_norm: WIN_BOX_COLOR dm_depth_row_large,dm_depth_bot_large,dm_depth_col_large,dm_depth_rgt_large return ; done TFT_depth_box_alt: WIN_BOX_COLOR dm_mask_depth_row, dm_depth_bot_huge, dm_depth_col_huge, dm_depth_rgt_huge TFT_depth_box_exit: return ; done ; Helper Function - show simulated target depth TFT_depth_target: FONT_COLOR_ATTENTION ; select attention color movff simulatormode_depth,lo ; copy target depth to lo TSTOSS opt_units ; check unit selection (0=m or 1=ft) bra TFT_depth_target_metric ; 0 - metric ;bra TFT_depth_target_imperial ; 1 - imperial TFT_depth_target_imperial: btfsc alt_layout_active ; alternative layout active? bra TFT_depth_target_imperial_alt ; YES ;bra TFT_depth_target_imperial_norm ; NO TFT_depth_target_imperial_norm: WIN_TINY dm_mask_depth_column+.40,dm_mask_depth_row ; position right of depth label bra TFT_depth_target_imperial_com ; continue with common part TFT_depth_target_imperial_alt: WIN_TINY dm_mask_depth_column+.62,dm_mask_depth_row+.20 ; position within last digit ;bra TFT_depth_target_imperial_com ; continue with common part TFT_depth_target_imperial_com: call convert_meter_to_feet ; convert value in lo from meters to feet output_999 ; display only last three digits from a 16 bit value (0-999) STRCAT_PRINT "ft" ; append unit and dump buffer to screen return ; done TFT_depth_target_metric: btfsc alt_layout_active ; alternative layout active? bra TFT_depth_target_metric_alt ; YES ;bra TFT_depth_target_metric_norm ; NO TFT_depth_target_metric_norm: WIN_TINY dm_mask_depth_column+.38,dm_mask_depth_row+.22 ; position right of full meters, above decimal bra TFT_depth_target_metric_com ; continue with common part TFT_depth_target_metric_alt: WIN_TINY dm_mask_depth_column+.65,dm_mask_depth_row+.20 ; position right of full meters, above decimal ;bra TFT_depth_target_metric_com ; continue with common part TFT_depth_target_metric_com: output_256 ; display target depth (0-255) PUTC_PRINT "m" ; append unit and dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - show maximum Depth ; global TFT_show_max_depth TFT_show_max_depth: FONT_COLOR_MEMO ; select color btfsc alt_layout_active ; alternative layout active? bra TFT_show_max_depth_alt ; YES ;bra TFT_show_max_depth_norm ; NO TFT_show_max_depth_norm: WIN_MEDIUM dm_max_depth_column_nvsi, dm_max_depth_row TSTOSS opt_vsigraph ; graphical VSI bar enabled? bra TFT_show_max_depth_norm_1 ; NO - keep position WIN_MEDIUM dm_max_depth_column, dm_max_depth_row ; YES - adopt output position TFT_show_max_depth_norm_1: btfsc FLAG_apnoe_mode ; in apnoe mode? bra TFT_max_depth_apnoe ; YES - different handling in apnoe mode TSTOSS opt_2ndDepthDisp ; NO - show average depth instead of max depth? bra TFT_max_depth_current ; NO - show max depth bra TFT_avg_depth_current ; YES - show avg depth TFT_max_depth_apnoe: btfss apnoe_at_surface ; apnoe mode, at the surface? bra TFT_max_depth_current ; NO - show max depth of current dive MOVII apnoe_max_pressure,mpr ; YES - get max pressure of all dives so far bra TFT_max_depth_common ; - continue with common part TFT_max_depth_current: MOVII pressure_rel_max_cached,mpr ; get the "normal" max pressure bra TFT_max_depth_common ; continue with common part TFT_avg_depth_current: MOVII pressure_rel_avg_total,mpr ; get total dive average pressure ;bra TFT_max_depth_common ; continue with common part TFT_max_depth_common: call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=m or 1=ft ? bra TFT_max_depth_metric ; 0 - use metric version ;bra TFT_max_depth_imperial ; 1 - use imperial version TFT_max_depth_imperial: bra TFT_show_depth_helper_imperial TFT_max_depth_metric: bsf omit_digit_2 ; print depth in full meters, i.e. do not print 2nd and 1st digit output_9999 ; test-print depth for range up to 99.9 meter (0xx-99xx) btfsc output_overflow ; did the printing clip, i.e. deeper than 99.9 meter? bra TFT_max_depth_metric_100m ; YES - print depth in full meters only ;bra TFT_max_depth_metric_99m ; NO - print depth in meters and decimeters TFT_max_depth_metric_99m: ; full meters btfsc max_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_max_depth_box_black ; NO - clear max depth area bcf max_depth_greater_100m ; current depth is now < 100 meter PRINT ; dump full meters to screen ; decimeters rcall TFT_max_depth_metric_dm ; set output position for decimeters output_65535 ; print full depth to buffer REINIT_BUFFER ; re-initialize the output buffer PUTC "." ; print a decimal point movff buffer+3,POSTINC2 ; get and print the decimeters PRINT ; dump to screen return ; done TFT_max_depth_metric_100m: ; full meters only btfss max_depth_greater_100m ; was the depth >= 100 meter during last call? rcall TFT_max_depth_box_black ; NO - clear max depth area bsf max_depth_greater_100m ; depth is >= 100 meter now REINIT_BUFFER ; re-initialize the output buffer bsf omit_digit_2 ; print depth in full meters, i.e. do not print 1st and 2nd digit output_65535 ; print depth for range >= 100 meter (0xx-655xx) PRINT ; dump to screen return ; done TFT_show_max_depth_alt: btfsc FLAG_apnoe_mode ; in apnoe mode? bra TFT_show_apnoe_max_depth ; YES - use apnoe surface output also in alternative dive mode screen btfss FLAG_gauge_mode ; NO - in gauge mode? return ; NO - done ;bra TFT_show_gauge_max_avg_depth; YES TFT_show_gauge_max_avg_depth: WIN_MEDIUM dm_gauge_max_depth_col, dm_gauge_max_depth_row ; set position for max depth MOVII pressure_rel_max_cached,mpr ; get max pressure into hi:lo rcall TFT_show_depth_helper ; print max depth WIN_MEDIUM dm_gauge_avg_depth_col, dm_gauge_avg_depth_row ; set position for avg depth MOVII pressure_rel_avg_total,mpr ; get average pressure into hi:lo bra TFT_show_depth_helper ; print avg depth and return ; Helper Function - clear max depth area TFT_max_depth_box_black: WIN_BOX_BLACK dm_max_depth_row, dm_max_depth_bot, dm_max_depth_column, dm_max_depth_rgt return ; done ; Helper Function - set output position for decimeters TFT_max_depth_metric_dm: WIN_SMALL dm_max_depth_dm_column_nvsi, dm_max_depth_dm_row ; default position TSTOSS opt_vsigraph ; graphical VSI bar enabled? return ; NO - keep position WIN_SMALL dm_max_depth_dm_column, dm_max_depth_dm_row ; YES - adopt position return ; done ; Helper Function - print depth in mpr TFT_show_depth_helper: call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=m, 1=ft bra TFT_show_depth_helper_metric ; 0 - metric ;bra TFT_show_depth_helper_imperial ; 1 - imperial TFT_show_depth_helper_imperial: call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] output_999 ; print depth (0-999) PRINT ; dump to screen return ; done TFT_show_depth_helper_metric: bsf omit_digit_1 ; do not print 1st digit bsf decimal_digit2 ; place a decimal point in front of digit 2 output_65535 ; print depth (0.0x-655.3x) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - show maximum Depth - Apnoe Mode ; global TFT_show_apnoe_max_depth TFT_show_apnoe_max_depth: ; title WIN_TINY dm_apnoe_last_max_depth_text_col, dm_apnoe_last_max_depth_text_row FONT_COLOR_MASK ; set color btfsc alt_layout_active ; alternative layout active? bra TFT_show_apnoe_max_depth_alt ; YES ;bra TFT_show_apnoe_max_depth_norm ; NO TFT_show_apnoe_max_depth_norm: STRCPY_TEXT_PRINT tApnoeMax ; print "Last Descent" bra TFT_show_apnoe_max_depth_com ; continue with common part TFT_show_apnoe_max_depth_alt: STRCPY_TEXT_PRINT tMaxDepth ; print "Max.Depth" ;bra TFT_show_apnoe_max_depth_com ; continue with common part TFT_show_apnoe_max_depth_com: ; value WIN_MEDIUM dm_apnoe_last_max_depth_column, dm_apnoe_last_max_depth_row FONT_COLOR_MEMO ; select color MOVII pressure_rel_max_cached,mpr ; get max pressure into hi:lo bra TFT_show_depth_helper ; print max depth and return ;----------------------------------------------------------------------------- ; Dive Mode - show Temperature ; global TFT_show_temp_divemode TFT_show_temp_divemode: btfsc dive_pre_menu ; is the pre-menu shown? return ; YES - abort btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort, no update of temperature now btfsc better_gas_blinking ; blinking better gas? return ; YES - abort, no update of temperature now btfsc better_dil_blinking ; blinking better diluent? return ; YES - abort, no update of temperature now WIN_SMALL dm_temp_column,dm_temp_row; set position FONT_COLOR_MEMO ; set color movlw index_compass_dm ; index of compass custom view cpfseq active_customview ; compass shown in custom view? goto TFT_temp_common ; NO - continue with common part for temperature goto TFT_update_stopwatch ; YES - show resettable dive time instead of temperature ;----------------------------------------------------------------------------- ; Dive Mode - active Gas and Setpoint ; global TFT_show_active_gas_divemode TFT_show_active_gas_divemode: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfsc FLAG_apnoe_mode ; in apnoe mode? return ; YES - done btfsc FLAG_gauge_mode ; in gauge mode? return ; YES - done IFDEF _ccr_pscr btfsc FLAG_oc_mode ; in OC mode? bra TFT_active_gas ; YES - show OC gas btfss bailout_mode ; NO - in bailout? bra TFT_active_sp_loop ; NO ;bra TFT_active_sp_bailout ; YES TFT_active_sp_bailout: WIN_SMALL dm_active_dil_column, dm_active_dil_row FONT_COLOR_ATTENTION ; set color STRCPY_TEXT_PRINT tDiveBailout ; print "Bailout" bra TFT_active_gas ; continue showing OC bailout gas TFT_active_sp_loop: MOVII int_O_breathed_ppO2,mpr ; copy ppO2 [cbar] to hi:lo call TFT_color_code_ppo2 ; color-code the output by the ppO2 of the loop gas mixture btfss timebase_1sec ; on even second? bra TFT_active_sp_print ; YES - print ppO2 with normal rendering btfsc warn_det_sensors_lost ; NO - all sensors lost? bra TFT_active_sp_fallback ; YES - process fallback case movff int_O_breathed_ppO2+1,WREG ; NO - get flags again (have been cleared in hi:lo by TFT_color_code_ppo2 meanwhile) btfss WREG,int_warning_flag ; warning flag set? bra TFT_active_sp_print ; NO - ppO2 is ok, print ppO2 with normal rendering bra TFT_active_sp_invers ; YES - print with inverse rendering TFT_active_sp_fallback: ; set up fallback case FONT_COLOR_ATTENTION ; set color to attention TFT_active_sp_invers: bsf win_invert ; print in inverse TFT_active_sp_print: WIN_MEDIUM dm_active_gas_sp_value_col, dm_active_gas_sp_value_row bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print ppO2 (0.00-9.99) PRINT ; dump to screen btfsc sign_shown ; advice/attention/warning sign shown? bra TFT_active_diluent ; YES - do not overwrite in case of alternative layout btfsc velocity_active_vsi ; graphical vertical speed indicator shown? bra TFT_active_diluent ; YES - do not overwrite in case of alternative layout TFT_active_sp_label_1: WIN_STD dm_active_sp_label_col, dm_active_sp_label_row FONT_COLOR_MEMO ; select memo color STRCAT "bar" ; print "bar" IFDEF _external_sensor movf dive_ccr_mode,W ; get setpoint mode =0: Fixed SP, =1: Sensor, =2: Auto SP sublw .1 ; dive_ccr_mode = 1 (Sensor) ? bnz TFT_active_sp_label_2 ; NO - skip btfsc alt_layout_active ; YES - in alternative layout? bra TFT_active_sp_label_2 ; YES - no space available for the "*" PUTC "*" ; NO - append "*" ENDIF TFT_active_sp_label_2: PRINT ; dump buffer to screen TFT_active_loop_mode: WIN_TINY dm_active_sp_label_col, dm_active_dil_row+.3 FONT_COLOR_MEMO ; set memo color btfsc FLAG_ccr_mode ; in CCR mode? bra TFT_active_loop_mode_ccr ; YES - print CCR label btfsc FLAG_pscr_mode ; in pSCR mode? bra TFT_active_loop_mode_pscr ; YES - print pSCR label bra TFT_active_diluent ; NO to both - should not happen TFT_active_loop_mode_ccr: STRCPY_TEXT_PRINT tDvCCR ; print "CCR" bra TFT_active_diluent ; continue with diluent TFT_active_loop_mode_pscr: STRCPY_TEXT_PRINT tDvPSCR ; print "pSCR" ;bra TFT_active_diluent ; continue with diluent TFT_active_diluent: MOVII int_O_pure_ppO2,mpr ; get ppO2 [cbar] into hi:lo call TFT_color_code_ppo2 ; color-code the output btfss better_dil_available ; better diluent available? bra TFT_active_diluent_show ; NO - print in normal rendering btg better_dil_blinking ; YES - toggle blink bit... btfss better_dil_blinking ; - blink now? bra TFT_active_diluent_show ; NO - print in normal rendering FONT_COLOR_ATTENTION ; YES - print in attention color bsf win_invert ; - print in inverse TFT_active_diluent_show: WIN_SMALL dm_active_dil_column, dm_active_dil_row bra TFT_active_dil_gas_common ; continue with common part ENDIF ; _ccr_pscr TFT_active_gas: MOVII int_O_breathed_ppO2,mpr ; copy ppO2 [cbar] into hi:lo call TFT_color_code_ppo2 ; color-code the output btfss better_gas_available ; better gas available? bra TFT_active_gas_print ; NO - print in normal rendering btg better_gas_blinking ; YES - toggle blink bit btfss better_gas_blinking ; blink now? bra TFT_active_gas_print ; NO - print in normal rendering FONT_COLOR_ATTENTION ; YES - blink in attention color bsf win_invert ; print in inverse TFT_active_gas_print: WIN_STD dm_active_gas_sp_value_col, dm_active_sp_label_row TFT_active_dil_gas_common: movff char_I_O2_ratio,lo ; lo now stores O2 in % IFDEF _helium movff char_I_He_ratio,hi ; hi now stores He in % ELSE clrf hi ; set hi to zero (no He) ENDIF call gaslist_strcat_mix ; print "Nxlo", "Txlo/hi", "Air" or "O2" PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - NDL Time ; global TFT_show_ndl TFT_show_ndl: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort MOVII int_O_NDL_norm,mpr ; NO - get NDL time in normal plan rcall TFT_show_ndl_tts_set_color ; - set color btfsc deco_locked ; - was the dive in deco? bra TFT_show_ndl_norm ; YES - use normal layout btfsc alt_layout_active ; NO - alternative layout active? bra TFT_show_ndl_alt ; YES - use alternative layout ;bra TFT_show_ndl_norm ; NO - use normal layout TFT_show_ndl_norm: WIN_MEDIUM dm_ndl_value_col_norm,dm_ndl_value_row_norm output_256 ; print NDL (0-255) PUTC_PRINT "'" ; append unit and dump buffer to screen return ; done TFT_show_ndl_alt: btfsc safety_stop_active ; is the safety stop active? bra TFT_show_ndl_alt_safety ; YES ;bra TFT_show_ndl_alt_no_safety ; NO TFT_show_ndl_alt_no_safety: ; clear potential remains from NDL normal WIN_BOX_BLACK dm_ndl_value_row_norm, dm_3rdrow_bot, dm_ndl_value_col_norm, dm_ndl_value_col_alt ; top, bottom, left, right WIN_LARGE dm_ndl_value_col_alt, dm_ndl_value_row_alt output_99 ; print NDL (0-99) PRINT ; dump buffer to screen return ; done TFT_show_ndl_alt_safety: WIN_MEDIUM dm_ndl_value_col_norm,dm_ndl_value_row_norm output_256 ; print NDL (0-255) PUTC_PRINT "'" ; append unit and dump buffer to screen return ; done ; Helper Function - set color TFT_show_ndl_tts_set_color: movf pallet_color_memo,W ; load memo color as default btfsc mpr+1,int_invalid_flag ; is the invalid flag set? movf pallet_color_disabled,W ; YES - replace by disabled color movwf font_color ; set font color return ; done ;----------------------------------------------------------------------------- ; Dive Mode - TTS Time ; global TFT_show_tts TFT_show_tts: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort MOVII int_O_TTS_norm,mpr ; NO - get the TTS rcall TFT_show_ndl_tts_set_color ; - color-code bcf hi,int_invalid_flag ; - clear the invalid flag if applicable btfsc alt_layout_active ; - in alternative layout? bra TFT_display_tts_alt ; YES ;bra TFT_display_tts_norm ; NO TFT_display_tts_norm: WIN_MEDIUM dm_tts_value_col_999x, dm_tts_value_row output_999 ; print (0...999) PUTC_PRINT "'" ; append unit and dump buffer to screen return ; done TFT_display_tts_alt: output_99 ; print TTS for range 0-99 btfsc output_overflow ; does TTS fit into 0-99 ? bra TFT_display_tts_alt_999 ; NO - print in 999 format ;bra TFT_display_tts_alt_99 ; YES - print in 99 format TFT_display_tts_alt_99: btfsc tts_over_99_last ; was TTS > 99 last time? rcall TFT_display_tts_clear ; YES - clear remains from TTS > 99 WIN_MEDIUM dm_tts_value_col_99, dm_tts_value_row output_99 ; print TTS (0...99) PUTC_PRINT "'" ; append unit and dump buffer to screen return ; done TFT_display_tts_alt_999: WIN_MEDIUM dm_tts_value_col_999, dm_tts_value_row REINIT_BUFFER ; clear the buffer output_999 ; print (0...999), no space for unit PRINT ; dump to screen bsf tts_over_99_last ; remember last TTS was > 99 mins return ; done ; Helper Function - clear remains from TTS > 99 TFT_display_tts_clear: ; clear remains from TTS > 99 WIN_BOX_BLACK dm_tts_value_row, dm_tts_value_row+.31, dm_tts_value_col_999, dm_tts_value_col_99 ; top, bottom, left, right bcf tts_over_99_last ; remember last TTS was NOT > 99 mins return ; done ;----------------------------------------------------------------------------- ; Dive Mode - Deco Stop Time & Depth ; global TFT_show_deco TFT_show_deco: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort movff char_O_deco_depth,lo ; get depth of first stop in meters call TFT_color_code_stop ; color-code output TSTOSC opt_units ; get unit (0=m, 1=ft) bra TFT_show_deco_norm ; 1 - ft can only be displayed in normal layout due to space required for 3 digit depth btfsc alt_layout_active ; 0 - in alternative layout? bra TFT_show_deco_alt ; YES ;bra TFT_show_deco_norm ; NO - combined depth and time TFT_show_deco_norm: WIN_MEDIUM dm_decostop_col_norm, dm_decostop_row_norm call TFT_display_stop_depth ; print stop (depth in lo) PUTC ' ' ; put a space char between depth and time bra TFT_display_deco_common ; continue with common part TFT_show_deco_alt: WIN_LARGE dm_decostop_col_alt_depth, dm_decostop_row_alt_depth output_99 ; print stop depth (0-99) PRINT ; dump buffer to screen WIN_MEDIUM dm_decostop_col_alt_time, dm_decostop_row_alt_time FONT_COLOR_MEMO ; select memo color ;bra TFT_display_deco_common ; continue with common part TFT_display_deco_common: movff char_O_deco_time,lo ; get stop time of the first stop in minutes output_99DD ; print minutes or double dots if null PUTC_PRINT "'" ; append unit and dump buffer to screen return ; done ;============================================================================= tft_out7 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - Apnoe current and overall Dive Time ; global TFT_show_apnoe_times TFT_show_apnoe_times: ; current dive time FONT_COLOR_MEMO ; select color WIN_MEDIUM dm_divetime_apnoe_col, dm_divetime_apnoe_row SMOVII apnoe_dive_mins,mpr ; ISR-safe copy of minutes to lo and seconds to hi output_99 ; print minutes (0-99) PRINT ; dump to screen WIN_SMALL dm_divetime_apnoe_secs_col, dm_divetime_apnoe_secs_row PUTC ':' ; print ":" movff hi,lo ; copy seconds to lo output_99x ; print seconds (00-99) PRINT ; dump to screen ; overall dive time WIN_MEDIUM dm_apnoe_total_divetime_col, dm_apnoe_total_divetime_row SMOVTT counted_divetime_mins,mpr ; ISR-safe 3 byte copy of minutes:2 and seconds output_256 ; minutes (0-256) PRINT ; show minutes in large font WIN_SMALL dm_apnoe_total_divetime_secs_col, dm_apnoe_total_divetime_secs_row ; left position for two sec figures PUTC ':' ; print ":" movff up,lo ; copy seconds from up to lo output_99x ; print seconds (00-99) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - show Apnoe Surface Time ; global TFT_show_apnoe_surface TFT_show_apnoe_surface: FONT_COLOR_MASK ; select mask color WIN_TINY dm_apnoe_surface_time_text_col, dm_apnoe_surface_time_text_row STRCPY_TEXT_PRINT tApnoeSurface ; print label FONT_COLOR_MEMO ; select memo color WIN_MEDIUM dm_apnoe_surface_time_column, dm_apnoe_surface_time_row SMOVII apnoe_surface_mins,mpr ; ISR-safe copy of minutes to lo and seconds to hi output_256 ; print minutes (0-255) PUTC ':' ; print ":" movff hi,lo ; copy seconds to lo output_99x ; print seconds (00-99) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - clear Apnoe Surface Time ; global TFT_clear_apnoe_surface TFT_clear_apnoe_surface: WIN_BOX_BLACK dm_apnoe_last_max_depth_text_row, .239, dm_apnoe_last_max_depth_column, .159 return ; done ;============================================================================= tft_out8 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - clear Deco Data (NDL / Stop & TTS ) ; global TFT_clear_deco_data TFT_clear_deco_data: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES WIN_BOX_BLACK dm_decostop_row_alt_depth, dm_3rdrow_bot, dm_decostop_col_alt_depth, dm_3rdrow_rgt ; top, bottom, left, right return ;----------------------------------------------------------------------------- ; Dive Mode - clear Dive Mode Menu ; ; starts 2 pixel higher to completely wipe away the temperature display ; global TFT_clear_divemode_menu TFT_clear_divemode_menu: WIN_BOX_BLACK dm_menu_row-.2, dm_menu_lower, dm_menu_left, dm_menu_right return ;============================================================================= VSI_table CODE_PACK ;============================================================================= VSI_table: ; use a depth-dependent ascent rate warning ; depth(ft): <20 >20 >40 >60 >75 >88 >101 >115 >128 >144 >164 ; speed(ft/min): 23 26 29 33 36 43 49 56 59 62 66 ; depth(m): <=6 >6 >12 >18 >23 >27 >31 >35 >39 >44 >50 ; speed(m/min): 7 8 9 10 11 13 15 17 18 19 20 (warning) ; speed(m/min): 5 6 7 8 8 10 12 13 14 15 15 (attention) ; < depth (m), warning speed, attention speed DB .6, .7, .5 DB .12, .8, .6 DB .18, .9, .7 DB .23,.10, .8 DB .27,.11, .8 DB .31,.13,.10 DB .35,.15,.12 DB .39,.17,.13 DB .44,.18,.14 DB .50,.19,.15 DB .255,.20,.15 ;============================================================================= tft_out9 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - show vertical Velocity ; global TFT_velocity_show TFT_velocity_show: FONT_COLOR_MEMO ; set default color btfsc neg_flag_velocity ; descending? rcall TFT_velocity_set_color ; NO - set color for text dependent on speed and set threshold for VSI graph rcall TFT_velocity_num ; show the numerical VSI TSTOSS opt_vsigraph ; graphical VSI bar enabled? return ; NO - done btfss neg_flag_velocity ; YES - in ascent? bra TFT_velocity_clear_graph ; NO - clear the graph ;bra TFT_velocity_graph_show ; YES - show the graph TFT_velocity_graph_show: btfsc alt_layout_active ; in alternative layout? return ; YES - done (not implemented) btfsc velocity_active_vsi ; was the graphical VSI shown before? bra TFT_velocity_graph_1 ; YES - no need to redraw the framework box bsf velocity_active_vsi ; NO - remember it is shown as of now ; - draw the framework box movf pallet_color_mask,W ; - color -> WREG WIN_FRAME_COLOR dm_velocity_graph_top+.00, dm_velocity_graph_bot-.00, dm_velocity_graph_lft, dm_velocity_graph_rgt movf pallet_color_mask,W ; - color -> WREG WIN_FRAME_COLOR dm_velocity_graph_top+.10, dm_velocity_graph_bot-.10, dm_velocity_graph_lft, dm_velocity_graph_rgt movf pallet_color_mask,W ; - color -> WREG WIN_FRAME_COLOR dm_velocity_graph_top+.20, dm_velocity_graph_bot-.20, dm_velocity_graph_lft, dm_velocity_graph_rgt movf pallet_color_mask,W ; - color -> WREG WIN_FRAME_COLOR dm_velocity_graph_top+.30, dm_velocity_graph_bot-.30, dm_velocity_graph_lft, dm_velocity_graph_rgt TFT_velocity_graph_1: movff divA+0,hi ; copy ascend speed (in m/min) to hi movff divA+1,xA+0 ; m/min for warning level (upper two blocks) clrf xA+1 MOVLI .5,xB ; threshold for color warning (5 color normal + 2 color warning) call div16x16 ; xC = xA / xB with xA as remainder ; xC+0 holds step size in m/min (e.g. =3 for 15m/min warning threshold) movff hi,xA+0 ; velocity in m/min clrf xA+1 ; ... movff xC+0,xB+0 ; step size clrf xB+1 ; ... call div16x16 ; xC = xA / xB with xA as remainder movff xC+0,lo ; copy amount of segments to show to lo incf lo,F ; lo +=1 dcfsnz lo,F ; lo = 1 ? bra DISP_graph_vel_0_fill ; YES - fill lowest segment dcfsnz lo,F ; lo = 2 ? bra DISP_graph_vel_1_fill ; YES - fill lower 2 segments dcfsnz lo,F ; lo = 3 ? bra DISP_graph_vel_2_fill ; YES - fill lower 3 segments dcfsnz lo,F ; lo = 4 ? bra DISP_graph_vel_3_fill ; YES - fill lower 4 segments dcfsnz lo,F ; lo = 5 ? bra DISP_graph_vel_4_fill ; YES - fill lower 5 segments dcfsnz lo,F ; lo = 6 ? bra DISP_graph_vel_5_fill ; YES - fill lower 6 segments dcfsnz lo,F ; lo = 7 ? bra DISP_graph_vel_6_fill ; YES - fill lower 7 segments ;bra DISP_graph_vel_7_fill ; YES - fill all segments DISP_graph_vel_7_fill: movf pallet_color_warning,W WIN_BOX_COLOR dm_velocity_graph_top+.2, dm_velocity_graph_top+.8, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_6_fill: movf pallet_color_warning,W WIN_BOX_COLOR dm_velocity_graph_top+.12, dm_velocity_graph_top+.18, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_5_fill: movf pallet_color_attention,W WIN_BOX_COLOR dm_velocity_graph_top+.22, dm_velocity_graph_top+.28, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_4_fill: movf pallet_color_memo,W WIN_BOX_COLOR dm_velocity_graph_top+.32, dm_velocity_graph_top+.38, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_3_fill: movf pallet_color_memo,W WIN_BOX_COLOR dm_velocity_graph_top+.42, dm_velocity_graph_top+.48, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_2_fill: movf pallet_color_memo,W WIN_BOX_COLOR dm_velocity_graph_top+.52, dm_velocity_graph_top+.58, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_1_fill: movf pallet_color_memo,W WIN_BOX_COLOR dm_velocity_graph_top+.62, dm_velocity_graph_top+.68, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_0_fill: movff xC+0,lo ; copy amount of segments to show to lo incf lo,F ; lo += 1 dcfsnz lo,F ; lo = 1 ? bra DISP_graph_vel_0_clear ; YES - clear upper 7 segments dcfsnz lo,F ; lo = 2 ? bra DISP_graph_vel_1_clear ; YES - clear upper 6 segments dcfsnz lo,F ; lo = 3 ? bra DISP_graph_vel_2_clear ; YES - clear upper 5 segments dcfsnz lo,F ; lo = 4 ? bra DISP_graph_vel_3_clear ; YES - clear upper 4 segments dcfsnz lo,F ; lo = 5 ? bra DISP_graph_vel_4_clear ; YES - clear upper 3 segments dcfsnz lo,F ; lo = 6 ? bra DISP_graph_vel_5_clear ; YES - clear upper 2 segments dcfsnz lo,F ; lo = 7 ? bra DISP_graph_vel_6_clear ; YES - clear upper 1 segments bra DISP_graph_vel_7_clear ; YES - clear no segments DISP_graph_vel_0_clear: WIN_BOX_BLACK dm_velocity_graph_top+.62, dm_velocity_graph_top+.68, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_1_clear: WIN_BOX_BLACK dm_velocity_graph_top+.52, dm_velocity_graph_top+.58, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_2_clear: WIN_BOX_BLACK dm_velocity_graph_top+.42, dm_velocity_graph_top+.48, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_3_clear: WIN_BOX_BLACK dm_velocity_graph_top+.32, dm_velocity_graph_top+.38, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_4_clear: WIN_BOX_BLACK dm_velocity_graph_top+.22, dm_velocity_graph_top+.28, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_5_clear: WIN_BOX_BLACK dm_velocity_graph_top+.12, dm_velocity_graph_top+.18, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_6_clear: WIN_BOX_BLACK dm_velocity_graph_top+.2, dm_velocity_graph_top+.8, dm_velocity_graph_lft+.2, dm_velocity_graph_rgt-.2 ;top, bottom, left, right DISP_graph_vel_7_clear: return ; done ; Helper Function - set color based on speed table or use static thresholds, with divA+0 = m/min TFT_velocity_set_color: bsf aux_flag ; for alternative layout: default is to show numerical VSI ; check if old/new ascend logic is used TSTOSS opt_vsitext ; 0=standard, 1=dynamic bra TFT_velocity_set_color_static ; 0 - static ascend rate limit ;bra TFT_velocity_set_color_dynamic ; 1 - dynamic ascend rate limit TFT_velocity_set_color_dynamic: movlw LOW (VSI_table-.2) ; point to 2 entries ahead of the speed table movwf TBLPTRL ; ... movlw HIGH (VSI_table-.2) ; ... movwf TBLPTRH ; ... movlw UPPER (VSI_table-.2) ; ... movwf TBLPTRU ; ... TFT_velocity_set_color_loop: TBLRD*+ ; consume waring speed form last round TBLRD*+ ; consume attention speed form last round TBLRD*+ ; get table depth movf depth_meter,W ; get current depth cpfsgt TABLAT ; table depth > current depth ? bra TFT_velocity_set_color_loop ; NO - try next TBLRD*+ ; YES - read warning speed threshold movf TABLAT,W ; - ... movwf divA+1 ; - copy to graph routine cpfslt divA+0 ; - actual vertical speed smaller than warning threshold? bra TFT_velocity_set_color_warn ; NO - set warning color and return TBLRD*+ ; YES - read attention speed threshold movf TABLAT,W ; - ... cpfslt divA+0 ; - actual vertical speed smaller than attention threshold? bra TFT_velocity_set_color_attn ; NO - set attention color and return bcf aux_flag ; YES - don't show in alternative layout bra TFT_velocity_set_color_memo ; - set memo color and return TFT_velocity_set_color_static: movlw color_code_velocity_warn_high ; get static threshold for warning in m/min movwf divA+1 ; copy for graph routine cpfslt divA+0 ; actual vertical speed smaller than warning threshold? bra TFT_velocity_set_color_warn ; NO - set warning color and return movlw color_code_velocity_attn_high ; YES - get static threshold for attention in m/min cpfslt divA+0 ; - actual vertical speed smaller than attention threshold? bra TFT_velocity_set_color_attn ; NO - set attention color and return bcf aux_flag ; YES - don't show in alternative layout ;bra TFT_velocity_set_color_memo ; - set memo color and return ; Helper Function - select color TFT_velocity_set_color_memo: FONT_COLOR_MEMO ; select memo color return ; done TFT_velocity_set_color_attn: FONT_COLOR_ATTENTION ; select attention color return ; done TFT_velocity_set_color_warn: FONT_COLOR_WARNING ; select warning color return ; done ; Helper Function - show the numerical VSI TFT_velocity_num: btfsc alt_layout_active ; in alternative layout? bra TFT_velocity_num_alt ; YES ;bra TFT_velocity_num_norm ; NO TFT_velocity_num_norm: WIN_SMALL dm_velocity_text_col_norm, dm_velocity_text_row_norm bra TFT_velocity_num_com ; continue with common part TFT_velocity_num_alt: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfss neg_flag_velocity ; NO - in ascent? bcf aux_flag ; NO - clear aux flag btfsc aux_flag ; - above attention or warning threshold? bsf win_invert ; YES - print inverse WIN_SMALL dm_velocity_text_col_alt, dm_velocity_text_row_alt ;bra TFT_velocity_num_com ; - continue with common part TFT_velocity_num_com: bsf velocity_active_num ; set numerical velocity as shown TSTOSS opt_units ; 0=meter, 1=feet bra TFT_velocity_num_metric ; 0 - meter ;bra TFT_velocity_num_imperial ; 1 - feet TFT_velocity_num_imperial: movff divA+0,WREG ; divA+0 = m/min mullw .100 ; PROD = mbar/min MOVII PRODL,mpr ; copy to hi:lo call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] tstfsz hi ; > 255 ? setf lo ; YES - set lo to 255 rcall TFT_velocity_num_helper ; print vertical speed STRCAT_TEXT tVelImperial ; print unit bra TFT_velocity_num_finish ; do finishing tasks TFT_velocity_num_metric: movff divA+0,lo ; divA+0 = m/min rcall TFT_velocity_num_helper ; print vertical speed STRCAT_TEXT tVelMetric ; print unit ;bra TFT_velocity_num_finish ; do finishing tasks TFT_velocity_num_finish: btfss alt_layout_active ; in alternative layout? bra TFT_velocity_num_finish_1 ; NO movlw "'" ; load encoding of minute sign movff WREG,buffer+4 ; put it after m (meter) / f (feet) clrf WREG ; load string terminator movff WREG,buffer+5 ; terminate string after minute sign TFT_velocity_num_finish_1: PRINT ; dump to screen return ; done ; Helper Function - print vertical speed TFT_velocity_num_helper: movlw '-' ; load coding for minus sign btfsc neg_flag_velocity ; ascending? movlw '+' ; YES - replace with coding for plus sign movwf POSTINC2 ; put sign into output buffer output_99 ; print rate (0-99) return ; done ;----------------------------------------------------------------------------- ; Dive Mode - clear vertical Velocity ; global TFT_velocity_clear TFT_velocity_clear: btfss velocity_active_num ; was the numerical VSI shown in last cycle? bra TFT_velocity_check_graph ; NO - no need to clear it, continue with graphical VSI ;bra TFT_velocity_clear_num ; YES TFT_velocity_clear_num: bcf velocity_active_num ; clear flag btfsc alt_layout_active ; in alternative layout? bra TFT_velocity_clear_num_alt ; YES ;bra TFT_velocity_clear_num_norm ; NO TFT_velocity_clear_num_norm: ; clear normal numerical area WIN_BOX_BLACK dm_velocity_text_row_norm, dm_velocity_text_bot_norm, dm_velocity_text_col_norm, dm_velocity_text_rgt_norm bra TFT_velocity_check_graph ; continue with graphical VSI TFT_velocity_clear_num_alt: ; clear alternative numerical area btfsc dive_main_menu ; is the dive mode menu shown? bra TFT_velocity_check_graph ; YES - skip WIN_BOX_BLACK dm_velocity_text_row_alt, dm_velocity_text_bot_alt, dm_velocity_text_col_alt, dm_velocity_text_rgt_alt ;bra TFT_velocity_check_graph ; continue with graphical VSI TFT_velocity_check_graph: btfss velocity_active_vsi ; was the graphical VSI shown in last cycle? return ; NO - no need to clear it, done ;bra TFT_velocity_clear_graph ; YES - clear it TFT_velocity_clear_graph: bcf velocity_active_vsi ; clear flag btfsc alt_layout_active ; in alternative layout? return ; YES - done (not implemented) WIN_BOX_BLACK dm_velocity_graph_top, dm_velocity_graph_bot, dm_velocity_graph_lft, dm_velocity_graph_rgt return ; done ;============================================================================= tft_out10 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - show Sign ; global TFT_divemode_sign_show TFT_divemode_sign_show: btfsc alt_layout_active ; alternative layout active? bra TFT_divemode_sign_show_alt ; YES ;bra TFT_divemode_sign_show_norm ; NO TFT_divemode_sign_show_norm: WIN_TOP dm_sign_row_norm ; set row position WIN_LEFT dm_sign_col_norm ; set column position bra TFT_divemode_sign_show_com ; continue with common part TFT_divemode_sign_show_alt: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfsc sign_shown ; NO - sign already shown? bra TFT_divemode_sign_show_alt_1; YES - no need to clear area again btfsc bailout_mode ; NO - in bailout? bra TFT_divemode_sign_show_alt_1; YES - no need to clear the area ; NO - clear area from "bar" label and loop mode if applicable WIN_BOX_BLACK dm_active_dil_row, dm_3rdrow_bot, dm_active_sp_label_col, dm_sign_rgt_alt ; top, bottom, left, right TFT_divemode_sign_show_alt_1: WIN_TOP dm_sign_row_alt ; - set row position WIN_LEFT dm_sign_col_alt ; - set column position ;bra TFT_divemode_sign_show_com ; - continue with common part TFT_divemode_sign_show_com: bsf sign_shown ; flag sign is shown btfsc sign_warning ; shall show warning sign? bra TFT_divemode_sign_show_warn ; YES - show warning sign btfsc sign_attention ; NO - shall show attention sign? bra TFT_divemode_sign_show_att ; YES - show attention sign btfsc sign_advice ; NO - shall show advice sign? bra TFT_divemode_sign_show_adv ; YES - show advice sign return ; NO - false alarm TFT_divemode_sign_color_warn: ; custom colors table for dive_warning2 icon - warning db .4, 0 ; #colors, spare dw 0x0000 ; color 0x00: outside black dw 0xff80 ; color 0x01: triangle yellow dw 0xff80 ; color 0x02: exclamation mark yellow dw 0xf800 ; color 0x03: inside red TFT_divemode_sign_color_adv: ; custom colors table for dive_warning2 icon - advice db .4, 0 ; #colors, spare dw 0x0000 ; color 0x00: outside black dw 0xffff ; color 0x01: triangle white dw 0xffff ; color 0x02: exclamation mark white dw 0x0780 ; color 0x03: inside green TFT_divemode_sign_show_warn: TFT_WRITE_PROM_IMAGE_CUST_COLOR TFT_divemode_sign_color_warn; set custom colors for warning TFT_WRITE_PROM_IMAGE_BY_LABEL dive_warning2_block ; show sign return ; done TFT_divemode_sign_show_att: TFT_WRITE_PROM_IMAGE_BY_LABEL dive_warning2_block ; show sign (with default colors) return ; done TFT_divemode_sign_show_adv: TFT_WRITE_PROM_IMAGE_CUST_COLOR TFT_divemode_sign_color_adv ; set custom colors for advice TFT_WRITE_PROM_IMAGE_BY_LABEL dive_warning2_block ; show sign return ; done ;----------------------------------------------------------------------------- ; Dive Mode - show Sign ; global TFT_divemode_sign_clear TFT_divemode_sign_clear: btfss sign_shown ; is the advice/attention/warning sign shown? return ; NO - done bcf sign_shown ; YES - clear flag btfsc alt_layout_active ; - alternative layout active? bra TFT_divemode_sign_clear_alt ; - YES ;bra TFT_divemode_sign_clear_norm; - NO TFT_divemode_sign_clear_norm: WIN_BOX_BLACK dm_sign_row_norm, dm_sign_bot_norm, dm_sign_col_norm, dm_sign_rgt_norm return ; done TFT_divemode_sign_clear_alt: WIN_BOX_BLACK dm_sign_row_alt, dm_sign_bot_alt, dm_sign_col_alt, dm_sign_rgt_alt return ; done ;============================================================================= tft_out11 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Mode - show Safety Stop ; global TFT_safety_stop_show TFT_safety_stop_show: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfsc safety_stop_active ; NO - is the safety stop shown already? bra TFT_safety_stop_show_time ; YES - just update the time ; NO - clear area that may be polluted by alternative NDL WIN_BOX_BLACK dm_safetystop_row, dm_tts_value_row, dm_ndl_value_col_alt, dm_safetystop_rgt ; top, bottom, left, right bsf safety_stop_active ; - flag safety stop is shown now WIN_STD dm_safetystop_text_column, dm_safetystop_text_row FONT_COLOR_MASK ; - set color STRCPY_PRINT "Stop " ; - print "Stop" with a trailing space to wipe away potential other remains TFT_safety_stop_show_time: WIN_MEDIUM dm_safetystop_column, dm_safetystop_row FONT_COLOR_ATTENTION ; set color movff safety_stop_countdown,lo ; get remaining time in seconds, low byte, from safety stop timer clrf hi ; set remaining time in seconds, high byte, to zero call convert_time ; convert hi:lo in seconds to minutes (up:hi) and seconds (lo) movff lo,up ; save seconds in up movff hi,lo ; move minutes to lo output_9 ; print minutes (0-9) PUTC ':' ; print ":" movff up,lo ; move seconds to lo output_99x ; print seconds (00-99) PRINT ; dump buffer to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - clear Safety Stop ; global TFT_safety_stop_clear TFT_safety_stop_clear: btfsc dive_main_menu ; is the dive mode menu shown? return ; YES - abort btfss safety_stop_active ; NO - is the safety stop shown? return ; NO - done, nothing to do ; YES - clear safety stop area WIN_BOX_BLACK dm_safetystop_row, dm_safetystop_bot, dm_safetystop_text_column, dm_safetystop_rgt ; top, bottom, left, right bcf safety_stop_active ; - safety stop not shown any more btfss deco_region ; - was the dive within deco stops region? return ; NO - done ;bra TFT_show_slow_reminder ; YES - show "SLOW" reminder ;----------------------------------------------------------------------------- ; Dive Mode - show "slow" Reminder ; TFT_show_slow_reminder: WIN_STD dm_safetystop_text_column+.5,dm_safetystop_text_row+.5 FONT_COLOR_ATTENTION ; set color STRCPY_TEXT tSlow ; print "SLOW" reminder STRCAT_PRINT 0x94 ; append an up-arrow return ; done ;============================================================================= tft_out12 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; clear complete Message Window ; global TFT_clear_message_window TFT_clear_message_window: btfss divemode ; in dive mode? bra TFT_clear_message_window_surf ; NO - clear surface mode area ;bra TFT_clear_message_window_dive ; YES - clear dive mode area TFT_clear_message_window_dive: btfsc alt_layout_active ; in alternative layout? bra TFT_clear_message_window_dive_2 ; YES - clear dive mode area, 2nd row only WIN_BOX_BLACK dm_warning_row, dm_warning_bot, dm_warning_column, dm_warning_rgt return ; done TFT_clear_message_window_surf: WIN_BOX_BLACK surf_warning1_row, surf_warning2_row+.24, surf_warning1_column, surf_warning1_column+.76 ; top, bottom, left, right return ; done ;----------------------------------------------------------------------------- ; clear 2nd Line of Message Window ; global TFT_clear_message_window_row2 TFT_clear_message_window_row2: bcf message_2nd_row_used ; 2nd row is cleared btfss divemode ; in dive mode? bra TFT_clear_message_window_surf_2 ; NO - clear surface mode area, 2nd row only ;bra TFT_clear_message_window_dive_2 ; YES - clear dive mode area, 2nd row only TFT_clear_message_window_dive_2: WIN_BOX_BLACK dm_warning2_row, dm_warning2_bot, dm_warning2_column, dm_warning2_rgt return ; done TFT_clear_message_window_surf_2: WIN_BOX_BLACK surf_warning2_row, surf_warning2_row+.24, surf_warning2_column, surf_warning2_column+.76 ; top, bottom, left, right return ; done ;----------------------------------------------------------------------------- ; Surface Mode - Message - when "I2CFail" was triggered ; global TFT_message_i2c_error TFT_message_i2c_error: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle STRCPY "I2C " ; print "I2C Error:" movff i2c_error_vault+0,WREG ; last device adress output_hex PUTC " " movff i2c_error_vault+1,WREG ; last data byte output_hex bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Surface Mode - Message - Desaturation ; global TFT_surf_mesg_desat TFT_surf_mesg_desat: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_MEMO ; select color STRCPY "Desat:" ; print label MOVII int_O_desaturation_time,mpr ; get desaturation time in minutes bra TFT_dsat_nofly_common ; continue with common part ;----------------------------------------------------------------------------- ; Surface Mode - Message - No-Fly / NO-Altitude ; global TFT_surf_mesg_nofly TFT_surf_mesg_nofly: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_MEMO ; select color movff char_I_altitude_wait,WREG ; get mode tstfsz WREG ; mode = altitude? bra TFT_nofly_time_alt ; YES ;bra TFT_nofly_time_fly ; NO TFT_nofly_time_fly: STRCPY "NoFly:" ; print no-fly label bra TFT_nofly_time_com ; continue TFT_nofly_time_alt: STRCPY "NoAlt:" ; print no-altitude label ;bra TFT_nofly_time_com ; continue TFT_nofly_time_com: MOVII int_O_nofly_time,mpr ; get no-fly time in minutes ;bra TFT_dsat_nofly_common ; continue with common part ; Helper Function - common part for TFT_surf_mesg_desat and TFT_surf_mesg_nofly TFT_dsat_nofly_common: call convert_time ; convert hi:lo in minutes to hours (up:hi) and minutes (lo) movff lo,up ; backup lo movff hi,lo ; get hours into lo output_99 ; print hours (0-99) PUTC ':' ; print ":" movff up,lo ; get minutes into lo output_99x ; print minutes (00-99) bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - fTTS ; global TFT_message_ftts TFT_message_ftts: call TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle IFDEF _cave_mode btfss cave_mode ; cave mode switched on? bra TFT_display_ftts_2 ; NO - classic open water TTS btfss dive_turned ; YES - dive turned? bra TFT_display_ftts_1 ; NO - cTTS from current position STRCPY "WP" ; YES - print waypoint mark movf backtrack_waypoint_num,W ; - copy current waypoint number to WREG cpfseq backtrack_waypoint_turn ; - current waypoint = turn point ? bra TFT_display_ftts_0 ; NO - print waypoint number STRCAT "-| " ; YES - print turn point symbol bra TFT_display_ftts_5 ; - continue with TTS TFT_display_ftts_0: movwf lo ; copy current waypoint number to lo bsf leftbind ; print left-aligned output_99 ; print waypoint number (0-99) PUTC " " ; append a space char bra TFT_display_ftts_5 ; continue with TTS TFT_display_ftts_1: STRCPY "cTTS " ; print cave TTS label followed by a space bra TFT_display_ftts_5 ; continue with TTS ENDIF ; _cave_mode TFT_display_ftts_2: btfsc FLAG_oc_mode ; in OC mode? bra TFT_display_ftts_3 ; YES - print fTTS label TSTOSS opt_calc_gasvolume ; NO - bailout volume calculation requested? bra TFT_display_ftts_3 ; NO - print fTTS label STRCPY "B/O" ; YES - print bailout label bra TFT_display_ftts_4 ; - continue TFT_display_ftts_3: ; OC or CCR/pSCR but no bailout volume calculation STRCPY "@+" ; print fTTS label TFT_display_ftts_4: movff char_I_extra_time,lo ; get fTTS delay time output_9 ; print fTTS delay time (0-9) PUTC ":" ; print ":" TFT_display_ftts_5: MOVII int_O_TTS_alt,mpr ; get alternative TTS FONT_COLOR_MEMO ; set memo color btfss hi,int_invalid_flag ; is the invalid flag set? bra TFT_display_ftts_6 ; NO - keep memo color bcf hi,int_invalid_flag ; YES - clear flag FONT_COLOR_DISABLED ; - switch to disabled color TFT_display_ftts_6: btfsc hi,int_not_yet_computed ; is the not-yet-computed flag set? bra TFT_display_ftts_8 ; YES - show dashes IFDEF _cave_mode btfsc cave_mode ; cave mode switched on? bra TFT_display_ftts_7 ; YES - take shortcut ENDIF movff int_O_TST_alt+1,WREG ; get high byte of the alternative total stops time btfsc WREG,int_is_zero ; total stops time = zero ? bra TFT_display_ftts_9 ; YES - show "NDL" movff char_O_deco_info,WREG ; NO - get deco info vector btfsc WREG,deco_zone ; - fTTS <= TTS ? FONT_COLOR_ADVICE ; YES - set to advice color (green) TFT_display_ftts_7: bsf leftbind ; print left-aligned output_999 ; print ascent time (0-999) PUTC "'" ; print minutes symbol bra TFT_message_close ; finalize message output TFT_display_ftts_8: STRCAT "---" ; print "---" for not computed bra TFT_message_close ; finalize message output TFT_display_ftts_9: STRCAT_TEXT tNDL ; print "NDL" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - ppO2 ; global TFT_message_ppo2 TFT_message_ppo2: call TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle call TFT_color_code_ppo2 ; color-code output btfsc bailout_mode ; in bailout? bra TFT_display_diluent_oc ; YES - bailout (OC) btfsc FLAG_ccr_mode ; NO - in CCR mode? bra TFT_display_diluent_ccr ; YES - CCR btfsc FLAG_pscr_mode ; NO - in pSCR mode? bra TFT_display_diluent_pscr ; YES - pSCR ;bra TFT_display_diluent_oc ; NO - OC TFT_display_diluent_oc: STRCPY_TEXT tppO2 ; bailout or OC mode, print "ppO2:" bra TFT_display_diluent_comm ; continue with ppO2 value TFT_display_diluent_ccr: STRCPY_TEXT tdil ; print "Dil:" bra TFT_display_diluent_comm ; continue with ppO2 value TFT_display_diluent_pscr: STRCPY_TEXT tmix ; YES - print "Mix:" ;bra TFT_display_diluent_comm ; - continue with ppO2 value TFT_display_diluent_comm: bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print ppO2 (0.00-9.99) bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Battery ; global TFT_message_battery_percent TFT_message_battery_percent: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle call TFT_color_code_battery ; color-code according to battery_low_condition flag STRCPY "Batt:" ; print "Batt:" bsf leftbind ; print left-aligned movff batt_percent,lo ; get battery % output_256 ; print battery % (0-255) PUTC "%" ; print "%" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - current CNS ; global TFT_message_cns TFT_message_cns: call TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle MOVII int_O_CNS_current,mpr ; get current CNS call TFT_color_code_cns ; color-code CNS output STRCPY_TEXT tCNS ; CNS: bsf leftbind ; print left-aligned output_999 ; print (0-999) PUTC "%" ; append unit bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - End-of-Dive CNS ; global TFT_message_cns_eod TFT_message_cns_eod: call TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_WARNING ; switch to warnings (red) text color STRCPY_TEXT tCNSeod ; end-of-dive CNS warning text bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Saturation ; global TFT_message_saturation TFT_message_saturation rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle MOVII int_O_lead_supersat,mpr ; get leading tissue's supersaturation call TFT_color_code_supersat ; color-code output STRCPY_TEXT tSAT ; print "Sat:" PUTC " " ; add a space to align the output with other warnings' outputs bsf leftbind ; print left-aligned output_256 ; print value of lo only, int_O_lead_supersat is limited to 255 PUTC "%" ; print "%" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - alternative GF ; global TFT_message_agf TFT_message_agf: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ATTENTION ; set attention color STRCPY_TEXT tDiveaGF_active ; print "aGF!" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Dive Timeout ; global TFT_message_divetimeout TFT_message_divetimeout: call TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_MEMO ; select color STRCPY 0x94 ; "End of dive" symbol (up-arrow) movff opt_diveTimeout,WREG ; get timeout in minutes mullw .60 ; get timeout in seconds MOVII PRODL, sub_a ; calculate timeout - elapsed time = countdown MOVII dive_timeout_timer,sub_b ; ... call subU16 ; ... MOVII sub_c,mpr ; transfer to mpr call convert_time ; convert hi:lo in seconds to minutes (up:hi) and seconds (lo) movff lo,up ; back-up lo movff hi,lo ; get minutes output_99 ; print minutes (0-99) PUTC ':' ; print ":" movff up,lo ; get seconds output_99x ; print seconds (00-99) movlw dm_warning_length ; get dive mode string length rcall TFT_buffer_trim_length ; fill / cut buffer to target length PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - Message - Gas Needs ; global TFT_message_gas_needs TFT_message_gas_needs: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle btfsc attn_det_gas_needs ; attention? FONT_COLOR_ATTENTION ; YES - set attention color btfsc warn_det_gas_needs ; warning? FONT_COLOR_WARNING ; YES - set warning color STRCPY_TEXT tGasNeedsWarn ; print "Gas Needs" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Gas Change ; global TFT_message_gas_change TFT_message_gas_change: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ADVICE ; set advice color STRCPY_TEXT tgaschange ; print "Change?" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - no Bailout Gas ; global TFT_message_no_BO_gas TFT_message_no_BO_gas: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_WARNING ; set warning color STRCPY_TEXT tnoBOgas ; print "-B/O-Gas-" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Message - open Message ; ; sets the row and column for the current message ; TFT_message_open: ; ignore warning (now)? decf message_counter,W ; load (message counter - 1) into WREG bcf STATUS,C ; clear carry bit btfss alt_layout_active ; in alternative layout? rrcf WREG,W ; NO - divide (message_counter-1) by 2 to get the page of the message cpfseq message_page ; page of the message = current page ? retlw .255 ; NO - do not show in this cycle (message window is not defined) btfss divemode ; YES - in dive mode? bra TFT_set_message_window_sf ; NO - setup for surface mode ;bra TFT_set_message_window_dm ; YES - setup for dive mode ; Dive Mode TFT_set_message_window_dm: btfsc alt_layout_active ; in alternative layout? bra TFT_set_message_window_dm_row2 ; YES - alternative layout only uses 2nd row btfss message_counter,0 ; NO - is the message number uneven? bra TFT_set_message_window_dm_row2 ; NO - use 2nd row ;bra TFT_set_message_window_dm_row1 ; YES - use 1st row TFT_set_message_window_dm_row1: WIN_SMALL dm_warning1_column, dm_warning1_row bcf message_2nd_row_used ; flag that the 2nd does not contain a message yet retlw .0 ; show in this cycle (message window is defined) TFT_set_message_window_dm_row2: WIN_SMALL dm_warning2_column, dm_warning2_row bsf message_2nd_row_used ; flag that the 2nd row contains a message now retlw .0 ; show in this cycle (message window is defined) ; Surface Mode TFT_set_message_window_sf: btfss message_counter,0 ; is the message counter uneven? bra TFT_set_message_window_sf_row2 ; NO - use 2nd row ;bra TFT_set_message_window_sf_row1 ; YES - use 1st row TFT_set_message_window_sf_row1: WIN_SMALL surf_warning1_column,surf_warning1_row bcf message_2nd_row_used ; flag that the 2nd row does not contain a message yet retlw .0 ; show in this cycle (message window is defined) TFT_set_message_window_sf_row2: WIN_SMALL surf_warning2_column,surf_warning2_row bsf message_2nd_row_used ; flag that the 2nd row contains a message now retlw .0 ; show in this cycle (message window is defined) ;----------------------------------------------------------------------------- ; Message - fill to a given Length, or cut if too long ; ; Input: buffer message ; WREG max length ; global TFT_buffer_trim_length TFT_buffer_trim_length: movwf lo ; copy max. string length to lo movf FSR2L,W ; get current string length to WREG subwf lo,F ; lo = max length - current length bn TFT_fillup_with_spaces_cut ; string too long -> cut string at max length bnz TFT_fillup_with_spaces_apnd ; string too short -> append spaces and string terminator bra TFT_fillup_with_spaces_term ; string at exact length -> append string terminator TFT_fillup_with_spaces_apnd: PUTC " " ; add one space decfsz lo,F ; all spaces done? bra TFT_fillup_with_spaces_apnd ; NO - loop bra TFT_fillup_with_spaces_term ; YES - append string terminator TFT_fillup_with_spaces_cut: movf lo,W ; get over-length (as negative number) into WREG addwf FSR2L,F ; set back buffer pointer to end of max length ;bra TFT_fillup_with_spaces_term ; append string terminator TFT_fillup_with_spaces_term: clrf INDF2 ; append string terminator return ; done ;----------------------------------------------------------------------------- ; Message - close Message ; TFT_message_close: movlw surf_warning_length ; get surface string length btfsc divemode ; in dive mode? movlw dm_warning_length ; YES - replace by dive mode string length rcall TFT_buffer_trim_length ; fill / cut buffer to target length PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Mode - Message - Micro-Bubbles ; global TFT_message_mbubbles TFT_message_mbubbles: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ATTENTION ; set attention color as default movff char_O_deco_warnings,WREG ; bank-safe copy for deco warnings btfsc WREG,mbubble_warning ; currently in the micro bubbles zone? FONT_COLOR_WARNING ; YES - reconfigure to warning color STRCPY_TEXT tMicroBubbles ; print message text bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Outside Buhlmann Model ; global TFT_message_outside TFT_message_outside: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ATTENTION ; set attention color movff char_O_deco_warnings,WREG ; bank-safe copy for deco warnings btfsc WREG,outside_warning ; currently outside the ZH-L16 model? FONT_COLOR_WARNING ; YES - reconfigure to warning color STRCPY "X-ZHL16-X" ; print message text bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Depth Limit ; global TFT_message_depth_limit TFT_message_depth_limit: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_WARNING ; set warning color STRCPY_TEXT tMaxDepth ; print "max.Depth" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Deco Info ; global TFT_message_deco_info TFT_message_deco_info rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ADVICE ; actually it is a memo, but we break the rules here and display in advice color (green) STRCPY_TEXT tDecoInfo ; write "Deco Zone" bra TFT_message_close ; finalize message output IFDEF _helium ;----------------------------------------------------------------------------- ; Dive Mode - Message - IBCD ; global TFT_message_IBCD TFT_message_IBCD: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ATTENTION ; set attention color STRCPY_TEXT tIBCD ; Print "IBCD N2He" bra TFT_message_close ; finalize message output ENDIF ; _helium IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Dive Mode - Message - Gas Density ; global TFT_message_gas_density TFT_message_gas_density: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle btfsc attn_det_gas_density ; on attention level? FONT_COLOR_ATTENTION ; YES - set attention color btfsc warn_det_gas_density ; on warning level? FONT_COLOR_WARNING ; YES set warning color STRCPY_TEXT tGasDensity ; print "G.Density" bra TFT_message_close ; finalize message output ENDIF ; _ccr_pscr IFDEF _external_sensor ;----------------------------------------------------------------------------- ; Dive Mode - Message - Sensor ppO2 Divergence ; global TFT_message_divergence TFT_message_divergence: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_WARNING ; set warning color STRCPY_TEXT tSensorDisagree ; print "Sensors<>" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - Fallback ; global TFT_message_fallback TFT_message_fallback: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_WARNING ; set warning color STRCPY_TEXT tDiveFallback ; print "Fallback!" bra TFT_message_close ; finalize message output ENDIF ; _external_sensor IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Dive Mode - Message - TR - Transmitter ; global TFT_message_transmitter TFT_message_transmitter: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ATTENTION ; set attention color STRCPY_TEXT tTransmitter ; print "P.Transm." bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - TR - Pressure ; global TFT_message_pressure TFT_message_pressure: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle btfsc attn_det_pressure1 ; on attention level - pressure 1 ? FONT_COLOR_ATTENTION ; YES - set attention color btfsc attn_det_pressure2 ; on attention level - pressure 2 ? FONT_COLOR_ATTENTION ; YES - set attention color btfsc warn_det_pressure1 ; on warning level - pressure 1 ? FONT_COLOR_WARNING ; YES - set warning color btfsc warn_det_pressure2 ; on warning level - pressure 2 ? FONT_COLOR_WARNING ; YES - set warning color STRCPY_TEXT tPressure ; print "Tank Pres" bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - TR - SAC ; global TFT_message_sac TFT_message_sac: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle MOVII int_O_SAC_measured,mpr ; copy measured SAC rate to hi:lo call TFT_color_code_pres_sac ; color-code the output STRCPY_TEXT tSAC ; print "SAC" (needs to be exactly 3 chars long) STRCAT ": " ; print ": " bsf decimal_digit1 ; place a decimal point in front of digit 1 output_999 ; print (0.0-99.9) bra TFT_message_close ; finalize message output ;----------------------------------------------------------------------------- ; Dive Mode - Message - TR - switch Tank Advice ; global TFT_message_switch_tanks TFT_message_switch_tanks: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle FONT_COLOR_ADVICE ; set advice color STRCPY_TEXT tswap ; print "Swap Tank" bra TFT_message_close ; finalize message output ENDIF ; _rx_functions IFDEF _cave_mode ;----------------------------------------------------------------------------- ; Dive Mode - Message - Cave Mode ; global TFT_message_cave_mode TFT_message_cave_mode: rcall TFT_message_open ; set row and column for the message tstfsz WREG ; is there room for the message? return ; NO - skip message in this cycle btfss attn_det_cave_shut_down ; on attention level? bra TFT_message_cave_mode_1 ; NO FONT_COLOR_ATTENTION ; YES - select attention color bra TFT_message_cave_mode_sd ; - print shutdown message TFT_message_cave_mode_1: btfss warn_det_cave_shut_down ; on warning level? bra TFT_message_cave_mode_info ; NO FONT_COLOR_WARNING ; YES - select warning color ;bra TFT_message_cave_mode_sd ; - print shutdown message TFT_message_cave_mode_sd: STRCPY_TEXT tCaveModeShutdown ; print "X-Cave-X" bra TFT_message_close ; finalize message output TFT_message_cave_mode_info: FONT_COLOR_MEMO ; set memo color bsf win_invert ; print in inverse STRCPY_TEXT tCaveMode ; write "Cave Mode" bra TFT_message_close ; finalize message output ENDIF ; _cave_mode ;============================================================================= tft_out13 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Surface Custom View - Last Dive Summery ; global TFT_surf_cv_lastdive TFT_surf_cv_lastdive: FONT_COLOR_MEMO ; set color WIN_TINY surf_gaslist_column,surf_gaslist_row+.5 STRCAT_TEXT_PRINT tLastDive ; "Last Dive:" WIN_TINY surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.1)+.5 STRCAT_TEXT_PRINT tDivetime ; "Divetime:" WIN_TINY surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.2)+.5 STRCAT_TEXT_PRINT tMaxDepth ; "Max.Depth" WIN_TINY surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.3)+.5 STRCAT_TEXT_PRINT tAvgDepth ; "Average" WIN_SMALL surf_gaslist_column+.48,surf_gaslist_row SMOVII int_O_desaturation_time,mpr ; ISR-safe copy of the desaturation time movf mpr+0,W ; get low byte into WREG iorwf mpr+1,W ; inclusive-or with high byte, check if desaturation time is zero bz TFT_surface_lastdive_2 ; YES - show last dive time ;bra TFT_surface_lastdive_1 ; NO - show surface interval TFT_surface_lastdive_1: ; surface interval SMOVII surface_interval_mins,mpr ; ISR-safe copy of surface interval in minutes call convert_time ; convert hi:lo in minutes to hours (up:hi) and minutes (lo) movff lo,up ; back-up low movff hi,lo ; get hours output_99 ; print hours (0-99) PUTC 'h' ; append hours unit movff up,lo ; get minutes output_99x ; print minutes (00-99) PUTC_PRINT "m" ; append minutes unit and dump to screen bra TFT_surface_lastdive_com ; continue TFT_surface_lastdive_2: ; last dive time SMOVQQ surface_interval_secs,xC ; ISR-safe copy of surface_interval_secs:4 to xC:4 call output_secs_as_days_hours ; print seconds as days and hours PRINT ; dump to screen ;bra TFT_surface_lastdive_com ; continue TFT_surface_lastdive_com: ; last dive duration WIN_SMALL surf_gaslist_column+.48,surf_gaslist_row+(surf_gaslist_spacing*.1) MOVII lastdive_duration,mpr ; get duration of last dive, minutes output_999 ; print minutes PUTC ":" ; print ":" movff lastdive_duration+2,lo ; get duration of last dive, seconds output_99x ; print seconds PRINT ; dump to screen ; last dive max depth WIN_SMALL surf_gaslist_column+.48,surf_gaslist_row+(surf_gaslist_spacing*.2) MOVII lastdive_maxdepth,mpr ; get max depth of last dive rcall TFT_surface_lastdive_depth ; print depth ; average depth WIN_SMALL surf_gaslist_column+.48,surf_gaslist_row+(surf_gaslist_spacing*.3) MOVII lastdive_avgdepth,mpr ; get avg depth of last dive ;bra TFT_surface_lastdive_depth ; print depth and return ; Helper Function - print depth TFT_surface_lastdive_depth: TSTOSS opt_units ; 0=Meter, 1=Feet bra TFT_surface_lastdive_m ; 0 - metric ;bra TFT_surface_lastdive_ft ; 1 - imperial TFT_surface_lastdive_ft: call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] output_999 ; print (0-999) STRCAT_TEXT tFeets1 ; "ft" PRINT ; dump to screen return ; done TFT_surface_lastdive_m: bsf omit_digit_1 ; do not print 1st digit bsf decimal_digit2 ; place a decimal point in front of digit 2 output_65535 ; print (0.0x-655.3x) STRCAT_TEXT tMeters ; "m" PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Custom View - OC Gas List ; global TFT_surf_cv_list_gas TFT_surf_cv_list_gas: clrf WREG ; do OC gases (0-4) ;bra TFT_surf_cv_list_gas_common ; continue with common part ; common list for OC gases and diluents TFT_surf_cv_list_gas_common: movwf gaslist_gas ; set first gas/dil to show FONT_COLOR_MEMO ; set color bsf short_gas_descriptions ; use short versions of gaslist_strcat_gas and gaslist_strcat_setpoint bcf better_gas_hint ; do not mark the best gas/diluent (to be used in dive mode only) ; Gas 1 WIN_SMALL surf_gaslist_column,surf_gaslist_row call gaslist_strcat_gas ; print gas description PRINT ; dump to screen ; Gas 2 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.1) incf gaslist_gas,F ; select next gas/dil call gaslist_strcat_gas ; print gas description PRINT ; dump to screen ; Gas 3 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.2) incf gaslist_gas,F ; select next gas/dil call gaslist_strcat_gas ; print gas description PRINT ; dump to screen ; Gas 4 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.3) incf gaslist_gas,F ; select next gas/dil call gaslist_strcat_gas ; print gas description PRINT ; dump to screen ; Gas 5 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.4) incf gaslist_gas,F ; select next gas/dil call gaslist_strcat_gas ; print gas description PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Custom View - Custom Text ; global TFT_surf_cv_text TFT_surf_cv_text: FONT_COLOR_MEMO ; set color ; 1st row WIN_SMALL surf_customtext_column,surf_customtext_row1 MOVRR opt_name+ .0,buffer,.12 ; copy 1st 12 chars to output buffer PRINT ; dump to screen ; 2nd row WIN_SMALL surf_customtext_column,surf_customtext_row2 MOVRR opt_name+.12,buffer,.12 ; copy 2nd 12 chars to output buffer PRINT ; dump to screen ; 3rd row WIN_SMALL surf_customtext_column,surf_customtext_row3 MOVRR opt_name+.24,buffer,.12 ; copy 3rd 12 chars to output buffer PRINT ; dump to screen ; 4th row WIN_SMALL surf_customtext_column,surf_customtext_row4 MOVRR opt_name+.36,buffer,.12 ; copy 4th 12 chars to output buffer PRINT ; dump to screen ; 5th row WIN_SMALL surf_customtext_column,surf_customtext_row5 MOVRR opt_name+.48,buffer,.12 ; copy 5th 12 chars to output buffer PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Surface Custom View - Tissue Graphics ; global TFT_surf_cv_tissues TFT_surf_cv_tissues: ; draw outer frame WIN_FRAME_STD surf_tissue_diagram_top, surf_tissue_diagram_bottom, surf_tissue_diagram_left, surf_tissue_diagram_right ; draw labels FONT_COLOR_MEMO ; set color WIN_SMALL surf_tissue_N2_column,surf_tissue_N2_row IFDEF _helium btfss tissue_graphic_layout ; shall N2 and He? bra TFT_surface_tissues_1 ; NO - print "Tissues" STRCPY_TEXT_PRINT tN2 ; YES - print "N2" WIN_SMALL surf_tissue_He_column,surf_tissue_He_row STRCPY_TEXT_PRINT tHe ; - print "He" bra TFT_surface_tissues_2 ; - continue with common part ENDIF TFT_surface_tissues_1: STRCPY_TEXT_PRINT tDiveTissues ; print "Tissues" TFT_surface_tissues_2: ; draw scale SCALELINE macro x movlw color_deepblue WIN_FRAME_COLOR surf_tissue_diagram_top+.23,surf_tissue_diagram_bottom-.4,surf_tissue_diagram_left+.4+x,surf_tissue_diagram_left+.4+x endm SCALELINE .0 SCALELINE .8 SCALELINE .16 SCALELINE .24 SCALELINE .32 SCALELINE .40 SCALELINE .48 SCALELINE .56 SCALELINE .64 SCALELINE .72 SCALELINE .80 ; common initialization for tissue pressures and saturation movlw .1 movwf win_height ; hight of the bargraph (0-239) movlw surf_tissue_diagram_left+.4 ; left start position for N2 bars movwf win_leftx2 ; column left (0-159) movlw surf_tissue_diagram_right-surf_tissue_diagram_left-.4 ; get max width for N2 bars (78 pixel) movwf win_width+0 ; set width of the bar box clrf win_width+1 ; ... movlw color_white ; color for tissues not exceeding surface max pressure movwf ex ; store in ex movlw color_red ; color for tissues exceeding surface max pressure movwf ul ; store in ul bcf aux_flag ; draw tissue pressures by default ; draw combined or N2 tissue pressures lfsr FSR2,char_O_tissue_pressure ; load base address of combined pressures by default IFDEF _helium btfsc tissue_graphic_layout ; shall show N2+He ? lfsr FSR2,char_O_tissue_pres_N2 ; YES - replace with base address of N2 pressures ENDIF btfsc tissue_graphic_mode ; in logbook mode? lfsr FSR2,header_buffer+index_tissue_pres_total ; YES - replace with base address from logbook movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter TFT_surf_tissues_N2_loop: movlw surf_tissue_diagram_top+.23 ; surface mode top start position N2 rcall TFT_surf_tissues_bargraph ; show one tissue movlw .2 ; bargraph spacing addwf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_surf_tissues_N2_loop ; NO - loop IFDEF _helium btfsc tissue_graphic_layout ; shall show N2+He ? bra TFT_surface_tissues_3 ; YES - show He tissue pressures ENDIF ; draw tissue saturations lfsr FSR2,char_O_tissue_saturation ; load base address of tissue supersaturation btfsc tissue_graphic_mode ; in logbook mode? lfsr FSR2,header_buffer+index_tissue_supersat ; YES - replace with base address from logbook movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter movlw color_grey ; color for tissue saturation movwf ex ; store in ex ; movlw color_yellow ; 2nd color is not used by tissue saturation ; movwf ul ; ... bsf aux_flag ; draw tissue saturation TFT_surf_tissues_sat_loop: movlw surf_tissue_diagram_top+.23+.57 ; surface mode top start position saturations rcall TFT_surf_tissues_bargraph ; draw tissue bargraph movlw .2 ; bargraph spacing addwf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_surf_tissues_sat_loop ; NO - loop ; common part for vertical lines movlw surf_tissue_diagram_top+.23+.57 ; get top position movwf win_top ; set top position (0-239) movlw .30 ; get hight movwf win_height ; set height movlw .1 ; get width movwf win_width+0 ; set width, low byte clrf win_width+1 ; set width, high byte ; print 100% line movlw surf_tissue_diagram_left+.4+.64 ; get left position movwf win_leftx2 ; set left position (0-159) movlw color_red ; color for 100% line BOX_COLOR ; draw the line ; GF factors enabled? btfss tissue_graphic_gf ; GF factors enabled? bra TFT_surface_tissues_4 ; NO - continue with CNS ; print GF low line movlw surf_tissue_diagram_left+.4 ; get left base position movwf win_leftx2 ; set left base position (0-159) movff opt_GF_low,WREG ; get GF low in 0.01 % btfsc tissue_graphic_mode ; in logbook mode? movff header_buffer+index_gf_lo_hi+0,WREG ; YES - replace by GF low from logbook mullw .164 ; multiply with 164 movf PRODH,W ; divide by 256 -> resulting scale factor is 164/256 = 0.640625 addwf win_leftx2,F ; add to base position movlw color_green ; color for GF low line BOX_COLOR ; draw the line ; print GF high line movlw surf_tissue_diagram_left+.4 ; get left base position movwf win_leftx2 ; set left base position (0-159) movff opt_GF_high,WREG ; get GF high in 0.01 % btfsc tissue_graphic_mode ; in logbook mode? movff header_buffer+index_gf_lo_hi+1,WREG ; YES - replace by GF high from logbook mullw .164 ; multiply with 164 movf PRODH,W ; divide by 256 -> resulting scale factor is 164/256 = 0.640625 addwf win_leftx2,F ; add to base position movlw color_yellow ; color for GF high line BOX_COLOR ; draw the line bra TFT_surface_tissues_4 ; continue with CNS IFDEF _helium TFT_surface_tissues_3: ; draw He tissue pressures movlw surf_tissue_diagram_left+.4+.16 ; start position for He bars movwf win_leftx2 ; column left (0-159) movlw surf_tissue_diagram_right-surf_tissue_diagram_left-.4-.16 ; max width for He bars movwf win_width+0 ; set total width of the bar box clrf win_width+1 ; ... lfsr FSR2,char_O_tissue_pres_He ; load base address of He pressures movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter TFT_surf_tissues_He_loop: movlw surf_tissue_diagram_top+.23+.57 ; surface mode top start position He rcall TFT_surf_tissues_bargraph ; show one tissue movlw .2 ; bargraph spacing addwf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_surf_tissues_He_loop ; NO - loop ENDIF TFT_surface_tissues_4: btfss tissue_graphic_cns ; shall show CNS value? return ; NO - done ; draw CNS% in-between tissue bars WIN_SMALL surf_tissue_He_column+.22,surf_tissue_He_row MOVII int_O_CNS_current,mpr ; get current CNS call TFT_color_code_cns ; color-code CNS value STRCPY_TEXT tCNS2 ; "CNS: " bsf leftbind ; print left-aligned output_999 ; print (0-999) PUTC_PRINT "%" ; append unit and dump to screen return ; done ; Helper Function - draw a bargraph TFT_surf_tissues_bargraph: addwf hi,W ; add row number to start position movwf win_top ; set as row top (0-239) movff POSTINC2,up ; get tissue value movf ex,W ; default color btfsc up,7 ; check if flag in bit 7 is set movf ul,W ; YES - switch to 2nd color bcf up,7 ; clear flag bit btfss aux_flag ; drawing saturations? rlncf up,F ; NO - multiply with 2 (previously cleared bit 7 will be rotated to bit 0) movff up,win_bargraph ; set length of the bargraph incf win_bargraph,F ; add 1 for a minimum visible bar (He-bars could be invisible else-wise) BOX_COLOR ; draw bargraph with color in WREG return ; done ;----------------------------------------------------------------------------- ; Surface Custom View - Tissue Graphics ; global TFT_surf_cv_settings TFT_surf_cv_settings: ; Deco Mode FONT_COLOR_MEMO ; select color WIN_SMALL surf_gaslist_column,surf_gaslist_row STRCAT_PRINT "ZH-L16" ; print fix part of model movff char_I_model,WREG ; get model iorwf WREG ; GF enabled? bnz TFT_surface_decosettings1 ; YES ;bra TFT_surface_decosettings0 ; NO TFT_surface_decosettings0: ; Display ZH-L16 sat/desat model WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.1) STRCPY_TEXT tSD ; print label (S/D) movff char_I_saturation_multiplier, lo ; get sat mult. movff char_I_desaturation_multiplier,hi ; get desat mult. bra TFT_surface_decosettings_com ; continue with common part TFT_surface_decosettings1: ; Display ZH-L16-GF low/high model WIN_SMALL surf_gaslist_column+.43,surf_gaslist_row STRCPY_TEXT_PRINT tZHL16GF ; print GF label behind deco model label WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.1) STRCPY_TEXT tGF ; print label (GF:) PUTC ' ' ; print a space movff opt_GF_low, lo ; get GF low movff opt_GF_high,hi ; get GF high ;bra TFT_surface_decosettings_com ; continue with common part TFT_surface_decosettings_com: ; percentage pair output_256 ; print (0-255) STRCAT "%/" ; print "%/" movff hi,lo ; get 2nd value output_256 ; print (0-255) PUTC_PRINT "%" ; append unit and dump to screen ; fTTS WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.2) STRCPY_TEXT tFTTSSurf ; print label movff char_I_extra_time,lo ; get time output_9 ; print time (0-9) STRCAT_TEXT_PRINT tMinutes ; append unit and dump to screen ; Last Stop WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.3) STRCPY_TEXT tLastDecostopSurf ; print label movff opt_last_stop,lo ; get depth output_9 ; print depth (0-9) STRCAT_TEXT_PRINT tMeters ; append unit and dump to screen ; Salinity WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.4) STRCPY_TEXT tDvSalinitySurf ; print label movff opt_salinity,lo ; get salinity output_9 ; print salinity (0-9) STRCAT_TEXT_PRINT tPercent ; append unit and dump to screen return ; done IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Surface Custom View - TR - Tank Data ; global TFT_surf_cv_tankdata TFT_surf_cv_tankdata: lfsr FSR1,rx_buffer ; load base address of RX buffer IFNDEF _rx_functions_debug WIN_SMALL surf_customtext_column,surf_customtext_row1 rcall TFT_surface_tankdata_print WIN_SMALL surf_customtext_column,surf_customtext_row2 rcall TFT_surface_tankdata_print WIN_SMALL surf_customtext_column,surf_customtext_row3 rcall TFT_surface_tankdata_print WIN_SMALL surf_customtext_column,surf_customtext_row4 rcall TFT_surface_tankdata_print WIN_SMALL surf_customtext_column,surf_customtext_row5 rcall TFT_surface_tankdata_print return ; done ; Helper Function - print transmitter data (max 12 char) TFT_surface_tankdata_print: FONT_COLOR_MEMO ; set color movff POSTINC1,hi ; get ID high (+0) movff POSTINC1,lo ; get ID low (+1) tstfsz hi ; ID high = 0 ? bra TFT_surface_tankdata_print_1; NO - slot in use tstfsz lo ; ID low = 0? bra TFT_surface_tankdata_print_1; NO - slot in use STRCAT_PRINT "---- " ; YES - mark as unused and clear rest of line from previous remains movf POSTINC1,W ; - dummy read (+2) to advance index movf POSTINC1,W ; - dummy read (+3) to advance index movf POSTINC1,W ; - dummy read (+4) to advance index bra TFT_surface_tankdata_print_3; - one more dummy read and return TFT_surface_tankdata_print_1: movf hi,W ; copy ID high to WREG output_hex ; print as hex 2 chars movf lo,W ; copy ID low to WREG output_hex ; print as hex 2 chars (4 in total) movff POSTINC1,hi ; get pressure high (+2) movff POSTINC1,lo ; get pressure low (+3) call TFT_color_code_pres_sac ; needed to clear the status flags before output bsf omit_digit_1 ; do not print 1st digit (0.1 bar) output_65535 ; print (0x-6553x) 4 chars (8 in total) PUTC " " ; 1 char (9 in total) movf POSTINC1,W ; get status (+4) andlw .7 ; mask out battery voltage bnz TFT_surface_tankdata_2 ; branch if battery is not completely drained FONT_COLOR_WARNING ; output in red STRCAT_PRINT "XXX" ; "XXX" for low bra TFT_surface_tankdata_print_3; one more dummy read and return TFT_surface_tankdata_2: addlw .28 ; add offset of 2.8 Volt movff WREG,lo ; copy to lo bsf decimal_digit1 ; put a decimal point in front of digit 1 output_99 ; print voltage 2 chars (11 in total) PUTC_PRINT " " ; dummy char 1 char (12 in total) TFT_surface_tankdata_print_3: movf POSTINC1,W ; dummy read (+5) to advance index return ; done ELSE ; _rx_functions_debug TFT_surface_tankdata_debug: ; surface custom view debug output FONT_COLOR_MEMO ; set color WIN_TINY surf_customtext_column,surf_customtext_row1+.14*0 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*1 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*2 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*3 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*4 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*5 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*6 rcall TFT_surface_tankdata_debug_print WIN_TINY surf_customtext_column,surf_customtext_row1+.14*7 rcall TFT_surface_tankdata_debug_print return ; done TFT_surface_tankdata_debug_print: movff POSTINC1,hi ; read ID high (+0) output_hex ; print as hex movff POSTINC1,lo ; read ID low (+1) output_hex ; print as hex PUTC "," ; print "," movff POSTINC1,hi ; read pressure high (+2) movff POSTINC1,lo ; read pressure low (+3) call TFT_color_code_pres_sac ; needed to clear the status flags before output bsf decimal_digit1 ; place a decimal point in front of digit 1 output_9999 ; print pressure (0.0-999.9) PUTC "," ; print "," movff POSTINC1,lo ; read status (+4) output_hex ; print as hex PUTC "," ; print "," movff POSTINC1,lo ; read date (+5) output_256 ; print (0-255) PRINT ; dump to screen return ; done ENDIF ; _rx_functions_debug ENDIF ; _rx_functions IFDEF _compass ;----------------------------------------------------------------------------- ; Surface Custom View - Compass - "set Bearing Dialog" ; global TFT_surf_cv_compass_bearing TFT_surf_cv_compass_bearing: btfsc compass_menu ; is the "set bearing" selection shown? return ; YES - done bsf compass_menu ; NO - set "set bearing" selection as shown WIN_BOX_BLACK surf_compass_bear_row,surf_warning1_row-1, surf_compass_bear_column, surf_decotype_column-.1 ; top, bottom, left, right WIN_SMALL surf_compass_bear_column,surf_compass_bear_row FONT_COLOR color_yellow ; set color bsf win_invert ; print inverse STRCPY_TEXT_PRINT tSetHeading ; 7 chars return ; done ENDIF ; _compass IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Surface Custom View - Diluent List ; global TFT_surf_cv_list_dil TFT_surf_cv_list_dil: movlw .5 ; do diluents (5-9) bra TFT_surf_cv_list_gas_common ; continue with common part ;----------------------------------------------------------------------------- ; Surface Custom View - Setpoint List ; global TFT_surf_cv_list_sp ; show setpoint list TFT_surf_cv_list_sp: FONT_COLOR_MEMO ; set color bsf short_gas_descriptions ; use short versions of gaslist_strcat_gas_PRODL and gaslist_strcat_setpoint bcf better_gas_hint ; do not mark the best gas/diluent (to be used in dive mode only) ;SP 1 WIN_SMALL surf_gaslist_column,surf_gaslist_row clrf gaslist_gas ; select SP 1 call gaslist_strcat_setpoint ; show setpoint data PRINT ; dump to screen ;SP 2 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.1) incf gaslist_gas,F ; select next SP call gaslist_strcat_setpoint ; show SP#+1 of PRODL# PRINT ; dump to screen ;SP 3 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.2) incf gaslist_gas,F ; select next SP call gaslist_strcat_setpoint ; show SP#+1 of PRODL# PRINT ; dump to screen ;SP 4 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.3) incf gaslist_gas,F ; select next SP call gaslist_strcat_setpoint ; show SP#+1 of PRODL# PRINT ; dump to screen ;SP 5 WIN_SMALL surf_gaslist_column,surf_gaslist_row+(surf_gaslist_spacing*.4) incf gaslist_gas,F ; select next SP call gaslist_strcat_setpoint ; show SP#+1 of PRODL# PRINT ; dump to screen return ; done ENDIF ; _ccr_pscr ;============================================================================= tft_out14 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Dive Custom View - AVR / Stopwatch - Mask ; global TFT_avr_stopwatch_mask TFT_avr_stopwatch_mask: FONT_COLOR_MASK ; select color IFNDEF _min_depth_option WIN_TINY dm_custom_avr_stop_column1+.2,dm_custom_avr_stop_title_row TSTOSS opt_2ndDepthDisp ; show avg depth instead of max depth in main screen? bra TFT_avr_stopwatch_mask_1 ; NO - draw avg depth in custom view then btfss alt_layout_active ; YES - in alternative layout? bra TFT_avr_stopwatch_mask_max ; NO - show max depth ;bra TFT_avr_stopwatch_mask_avg ; YES - show avg depth TFT_avr_stopwatch_mask_avg: STRCPY_TEXT_PRINT tDiveTotalAvg ; mask for average depth bra TFT_avr_stopwatch_mask_2 ; continue TFT_avr_stopwatch_mask_1: btfss alt_layout_active ; YES - in alternative layout? bra TFT_avr_stopwatch_mask_avg ; NO - show avg depth ;bra TFT_avr_stopwatch_mask_max ; YES - show max depth TFT_avr_stopwatch_mask_max: STRCPY_TEXT_PRINT tMaxDepth ; mask for maximum depth ;bra TFT_avr_stopwatch_mask_2 ; continue TFT_avr_stopwatch_mask_2: WIN_TINY dm_custom_avr_stop_column2+.3,dm_custom_avr_stop_title_row STRCPY_TEXT_PRINT tDiveStopwatch ; print label WIN_TINY dm_custom_avr_stop_column3-.8,dm_custom_avr_stop_title_row STRCPY_TEXT_PRINT tDiveStopAvg ; print label return ; done ELSE WIN_TINY dm_custom_avr_stop_column1+.2,dm_custom_avr_stop_title_row STRCPY_PRINT "Max.Depth" ; print label WIN_TINY dm_custom_avr_stop_column2+.3,dm_custom_avr_stop_title_row STRCPY_PRINT "Avg.Depth" ; print label WIN_TINY dm_custom_avr_stop_column3-.8,dm_custom_avr_stop_title_row STRCPY_PRINT "Min.Depth" ; print label return ; done ENDIF ;----------------------------------------------------------------------------- ; Dive Custom View - AVR / Stopwatch - Data ; global TFT_avr_stopwatch TFT_avr_stopwatch: FONT_COLOR_MEMO ; select color IFNDEF _min_depth_option ; total average depth or max depth WIN_MEDIUM dm_custom_avr_stop_column1,dm_custom_avr_stop_row TSTOSS opt_2ndDepthDisp ; show average depth instead of maximum depth in main screen? bra TFT_avr_stopwatch_1 ; NO - draw avg depth in custom view then btfsc alt_layout_active ; YES - in alternative layout? bra TFT_avr_stopwatch_avg ; YES - show avg depth bra TFT_avr_stopwatch_max ; NO - show max depth TFT_avr_stopwatch_1: btfsc alt_layout_active ; YES - in alternative layout? bra TFT_avr_stopwatch_max ; YES - show max depth ;bra TFT_avr_stopwatch_avg ; NO - show avg depth TFT_avr_stopwatch_avg: MOVII pressure_rel_avg_total,mpr ; get total dive average pressure into hi:lo bra TFT_avr_stopwatch_2 ; continue TFT_avr_stopwatch_max: MOVII pressure_rel_max_cached,mpr ; get maximum pressure into hi:lo ;bra TFT_avr_stopwatch_2 ; continue TFT_avr_stopwatch_2: call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=m, 1=ft bra TFT_update_avr_stopwatch1_metric; 0 - metric ;bra TFT_update_avr_stopwatch1_imp ; 1 - imperial TFT_update_avr_stopwatch1_imp: call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] output_999 ; print (0-999) PRINT ; dump to screen bra TFT_update_avr_stopwatch2 ; continue TFT_update_avr_stopwatch1_metric: rcall TFT_update_avr_stopwatch_metric ; print metric depth ;bra TFT_update_avr_stopwatch2 ; continue TFT_update_avr_stopwatch2: ; stopped average depth WIN_MEDIUM dm_custom_avr_stop_column3,dm_custom_avr_stop_row MOVII pressure_rel_avg_trip,mpr ; get the resettable average pressure call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=m, 1=ft bra TFT_update_avr_stopwatch2_metric; 0 - metric ;bra TFT_update_avr_stopwatch2_imp ; 1 - imperial TFT_update_avr_stopwatch2_imp: call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] output_999 ; print (0-999) PRINT ; dump to screen bra TFT_update_avr_stopwatch3 ; continue TFT_update_avr_stopwatch2_metric: rcall TFT_update_avr_stopwatch_metric ; print metric depth bra TFT_update_avr_stopwatch3 ; continue ; Helper Function - print metric depth TFT_update_avr_stopwatch_metric: bsf leftbind ; print left-aligned bsf omit_digit_1 ; do not print 1st digit (no cm) bsf decimal_digit2 ; place a decimal point in front of digit 2 output_65535 ; print (0.0x-655.3x) PUTC " " ; wipe out remains from last output clrf WREG movff WREG,buffer+.4 ; limit string length to 4 = 3 digits + 1 half-size decimal dot PRINT ; dump to screen return ; done ELSE ; resettable maximum depth - needs ISR-safe copy! WIN_MEDIUM dm_custom_avr_stop_column1,dm_custom_avr_stop_row FONT_COLOR_MEMO ; select color SMOVII pressure_rel_max_trip,mpr ; get resettable maximum pressure rcall TFT_avr_stopwatch_helper ; print depth ; resettable average depth WIN_MEDIUM dm_custom_avr_stop_column2-.1,dm_custom_avr_stop_row FONT_COLOR_ATTENTION ; select color MOVII pressure_rel_avg_trip,mpr ; get resettable average pressure rcall TFT_avr_stopwatch_helper ; print depth ; resettable minimum depth - needs ISR safe copy! WIN_MEDIUM dm_custom_avr_stop_column3-.12,dm_custom_avr_stop_row FONT_COLOR_MEMO ; select color SMOVII pressure_rel_min_trip,mpr ; get resettable minimum pressure rcall TFT_avr_stopwatch_helper ; print depth return ; done TFT_avr_stopwatch_helper: call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] bsf leftbind ; print left-aligned bsf decimal_digit2 ; place a decimal point in front of digit 2 output_65535 ; print (0.00-655.35) PUTC " " ; wipe out remains from last output clrf WREG ; load string terminator movff WREG,buffer+.5 ; limit string length to 5 = 4 digits + 1 half-size decimal dot PRINT ; dump to screen return ; done ENDIF TFT_update_avr_stopwatch3: WIN_MEDIUM dm_custom_avr_stop_column2,dm_custom_avr_stop_row ;bra TFT_update_stopwatch ; continue TFT_update_stopwatch: ; jump-in point for stopped dive time in compass custom view MOVII divesecs_avg_trip,mpr ; get the resettable dive time (stopwatch) call convert_time ; convert hi:lo in seconds to minutes (up:hi) and seconds (lo) movlw .100 ; display layout will change if minutes become >= 100 cpfslt hi ; minutes < 100 ? bra TFT_update_stopwatch_1 ; NO - display hours:minutes bcf aux_flag ; YES - will print minutes : seconds bra TFT_update_stopwatch_2 ; - continue TFT_update_stopwatch_1: movff hi,lo ; transfer minutes (low byte) to lo movff up,hi ; transfer minutes (high byte) to hi call convert_time ; convert hi:lo in minutes to hours (up:hi) and minutes (lo) bsf aux_flag ; will print hours : minutes TFT_update_stopwatch_2: movf hi,W ; exchange lo and hi movff lo,hi ; ... movwf lo ; ... output_99 ; print minutes or hours (0 - 99) movlw ":" ; load standard separator btfsc aux_flag ; will print hours : minutes ? movlw "'" ; YES - swap to alternative separator movwf POSTINC2 ; print separator movff hi,lo ; restore lo output_99x ; print seconds or minutes (00-99) movlw .5 ; set target length call TFT_buffer_trim_length ; fill / cut buffer to target length PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Gas Needs - Mask ; global TFT_gas_needs_mask TFT_gas_needs_mask: WIN_TINY dm_custom_gas_column_title, dm_custom_gas_mask_row FONT_COLOR_MASK ; select color IFDEF _cave_mode movff char_O_deco_info,WREG ; get the deco info vector btfss WREG,gas_needs_cave ; are the gas needs calculated for cave mode? bra TFT_gas_needs_mask_ascent_1 ; NO - show as direct ascent needs ;bra TFT_gas_needs_mask_ascent_0 ; YES - show as cave return needs TFT_gas_needs_mask_ascent_0: bsf gas_needs_mode_last ; remember last results were for cave mode STRCPY_TEXT tGasNeedsCaveMode ; print "Gas Needs Cave Mode" bra TFT_gas_needs_mask_ascent_2 ; continue TFT_gas_needs_mask_ascent_1: bcf gas_needs_mode_last ; remember last results were for direct ascent STRCPY_TEXT tGasNeedsAscent ; "Gas Needs Ascent" ;bra TFT_gas_needs_mask_ascent_2 ; continue ELSE STRCPY_TEXT tGasNeedsAscent ; "Gas Needs Ascent" ENDIF TFT_gas_needs_mask_ascent_2: TSTOSS char_I_extra_time ; fTTS enabled? bra TFT_gas_needs_mask_ascent_3 ; NO - continue STRCAT " fTTS" ; YES - append fTTS marking TFT_gas_needs_mask_ascent_3: STRCAT_PRINT " (bar)" ; append " (bar)" and dump buffer to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Gas Needs - Data ; ; LIMITATION: there is only space for 4 gases on the screen - if 5 gases ; have a pres_need > 0, then only the first 4 will be shown! ; global TFT_gas_needs TFT_gas_needs: IFDEF _cave_mode movff char_O_deco_info,WREG ; get deco info vector btfss WREG,gas_needs_cave ; are the gas needs calculated for cave mode? bra TFT_gas_needs_ascent_1 ; NO - continue below... btfsc gas_needs_mode_last ; YES - were the last results calculated for cave mode? bra TFT_gas_needs_ascent_3 ; YES - mask still valid bra TFT_gas_needs_ascent_2 ; NO - redraw mask TFT_gas_needs_ascent_1: btfss gas_needs_mode_last ; NO - were the last results calculated for direct ascent? bra TFT_gas_needs_ascent_3 ; YES - mask still valid ;bra TFT_gas_needs_ascent_2 ; NO - redraw mask TFT_gas_needs_ascent_2: rcall TFT_gas_needs_mask ; redraw mask ;bra TFT_gas_needs_ascent_3 ; continue ENDIF TFT_gas_needs_ascent_3: clrf up ; initialize gas index (0-4) WIN_SMALL dm_custom_gas_column1+.5,dm_custom_gas_row1 ; set position rcall TFT_gas_needs_helper ; print need WIN_SMALL dm_custom_gas_column1+.5,dm_custom_gas_row2 ; set position rcall TFT_gas_needs_helper ; print need WIN_SMALL dm_custom_gas_column2+.5,dm_custom_gas_row1 ; set position rcall TFT_gas_needs_helper ; print need WIN_SMALL dm_custom_gas_column2+.5,dm_custom_gas_row2 ; set position rcall TFT_gas_needs_helper ; print need return ; done ; Helper Function - print need for next gas TFT_gas_needs_helper: FONT_COLOR_MEMO ; select default color movlw .5 ; total number of gases cpfslt up ; check if all gases have been processed bra TFT_gas_needs_helper_1 ; YES - clear display area movf up,W ; NO - get gas number and check if need of that gas is > 0 rlncf WREG,W ; - multiply by 2 incf WREG,W ; - add 1 to address high byte lfsr FSR1,int_O_gas_need_pres ; - load base of gas needs in pressure movff PLUSW1,hi ; - read HIGH(int_O_gas_need_pres[up]) btfss hi,int_is_zero ; - check flag for pres_need == 0 bra TFT_gas_needs_helper_2 ; NO - print gas type and pressure needed incf up,F ; YES - increment to next gas bra TFT_gas_needs_helper ; - loop and try the next gas TFT_gas_needs_helper_1: ; no gases to show anymore, clear display area from potential remains of last invocation STRCAT_PRINT " ---- " ; overwrite outdated stuff if screen position is not needed return ; done TFT_gas_needs_helper_2: ; output gas type and pressure needed movf up,W ; get gas number (0-4) to WREG lfsr FSR1,opt_gas_O2_ratio ; read opt_gas_O2_ratio[WREG] movff PLUSW1,lo ; copy result to lo lfsr FSR1,opt_gas_He_ratio ; read opt_gas_He_ratio[WREG] movff PLUSW1,hi ; copy result to hi call gaslist_strcat_mix ; print "Air", "O2", "21/35", etc. PUTC ':' ; print ":" movf up,W ; get gas number (0-4) to WREG rlncf WREG,W ; multiply by 2 lfsr FSR1,int_O_gas_need_pres ; load base of gas needs in pressure movff PLUSW1,lo ; read LOW(int_O_gas_need_pres[up]) incf WREG,W ; add 1 to address high byte movff PLUSW1,hi ; read HIGH(int_O_gas_need_pres[up]) btfsc hi,int_attention_flag ; check if attention flag is set (pres_need > pres_fill * threshold) FONT_COLOR_ATTENTION ; YES - print gas need in attention color btfsc hi,int_warning_flag ; check if warning flag is set (pres_need > pres_fill) FONT_COLOR_WARNING ; YES - print gas need in warning color movff int_O_gas_need_pres+1,WREG ; get HIGH(int_O_gas_need_pres[0]) which holds flag for invalid data btfsc WREG,int_invalid_flag ; check if invalid data flag is set FONT_COLOR_DISABLED ; YES - print gas need in disabled color bcf hi,int_attention_flag ; clear flag for attention bcf hi,int_warning_flag ; clear flag for warning bcf hi,int_high_flag ; clear flag for > 999 bar bcf hi,int_invalid_flag ; clear flag for invalid data (will actually only be set with 1st gas) output_999 ; print (0-999) PUTC_PRINT " " ; add a space to overwrite any potential remains of earlier outputs and dump buffer to screen incf up,F ; increment to next gas return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Deco Plan - Mask ; global TFT_decoplan_mask ; mask for deco plan TFT_decoplan_mask: WIN_TINY dm_custom_decoplan_title_column, dm_custom_decoplan_title_row FONT_COLOR_MASK ; select color STRCPY_TEXT_PRINT tDiveDecoplan ; print label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Deco Plan - Data ; global TFT_decoplan TFT_decoplan: lfsr FSR0,char_O_deco_depth ; load base address of stops table clrf ex ; will be used for auxiliary flags FONT_COLOR_MEMO ; set default output color movff char_O_deco_gas+0,lo ; get flag for invalid deco data btfsc lo,char_invalid_flag ; is the invalid flag set? FONT_COLOR_DISABLED ; YES - set to disabled color ; 2nd stop WIN_SMALL dm_cust_dstop_2nd_stop_column, dm_cust_dstop_2nd_stop_row rcall TFT_decoplan_helper ; show stop data ; 3rd stop WIN_SMALL dm_cust_dstop_3rd_stop_column, dm_cust_dstop_3rd_stop_row rcall TFT_decoplan_helper ; show stop data ; 4th stop bsf ex,4 ; flag we are on 4th screen position WIN_SMALL dm_cust_dstop_4th_stop_column, dm_cust_dstop_4th_stop_row rcall TFT_decoplan_helper ; show stop data bcf ex,4 ; clear 4th position flag again ; 5th stop WIN_SMALL dm_cust_dstop_5th_stop_column, dm_cust_dstop_5th_stop_row rcall TFT_decoplan_helper ; show stop data ; 6th stop WIN_SMALL dm_cust_dstop_6th_stop_column, dm_cust_dstop_6th_stop_row rcall TFT_decoplan_helper ; show stop data ; 7th stop WIN_SMALL dm_cust_dstop_7th_stop_column, dm_cust_dstop_7th_stop_row rcall TFT_decoplan_helper ; show stop data return ; done ; Helper Function - show stop data TFT_decoplan_helper: btfsc ex,0 ; no more stops to show? bra TFT_decoplan_helper_1 ; YES - skip checking next entry - it will be empty, too movff PREINC0,lo ; NO - advance pointer to get the depth of the 2nd, 3rd, 4th, ... stop tstfsz lo ; is the stop depth = 0, i.e. no stop entry? bra TFT_decoplan_helper_3 ; NO - show stop data TFT_decoplan_helper_1: ; no more stop table entries bsf ex,0 ; flag that there are no more stop table entries btfss ex,4 ; are we on the 4th screen position? bra TFT_decoplan_helper_2 ; NO - normal handling on this position btfsc ex,1 ; YES - special handling, has any stop been shown? bra TFT_decoplan_helper_2 ; YES - print normal blanking STRCPY_PRINT " ---- " ; NO - print a "no stops" indication (blanking potential previous content, too) return ; done TFT_decoplan_helper_2: ; no more stop table entries, blank potential previous content STRCPY_PRINT " " ; wipe screen position by printing 7 spaces return ; done TFT_decoplan_helper_3: rcall TFT_display_stop_depth ; print stop depth (depth in lo) PUTC " " ; put a space char between depth and time movlw NUM_STOPS ; offset between arrays holding depths and durations movff PLUSW0,lo ; get duration of the current stop output_99dd ; print duration, prints double dots if duration is zero PUTC_PRINT "'" ; append unit and dump buffer to screen bsf ex,1 ; flag that a stop was shown return ; done ; Helper Function - print stop depth TFT_display_stop_depth: ; print depth (stored in lo) TSTOSS opt_units ; get unit (0=m, 1=ft) bra TFT_display_stop_depth_m ; 0 - meter ;bra TFT_display_stop_depth_ft ; 1 - feet TFT_display_stop_depth_ft: call convert_meter_to_feet ; convert value in lo from meters to feet output_999 ; output stop depth (0-999) return ; done TFT_display_stop_depth_m: output_99 ; output stop depth (0-99) STRCAT_TEXT tMeters ; append unit return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Ceiling, Supersaturation & Tissues - Mask ; global TFT_ceiling_GF_tissue_mask TFT_ceiling_GF_tissue_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_ceiling_column+.2,dm_custom_ceiling_title_row STRCPY_TEXT_PRINT tCeiling ; print label WIN_TINY dm_custom_tissue_title_column, dm_custom_tissue_title_row STRCPY_TEXT_PRINT tDiveTissues ; print label WIN_TINY dm_custom_gf_column1+.5, dm_custom_gf_title_row STRCPY_TEXT_PRINT tGFInfo ; print label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Ceiling, Supersaturation & Tissues - Data ; global TFT_ceiling_GF_tissue TFT_ceiling_GF_tissue: WIN_MEDIUM dm_custom_ceiling_column,dm_custom_ceiling_row MOVII int_O_ceiling,mpr ; get ceiling in [mbar] relative pressure call TFT_color_code_ceiling ; color-code the output (also strips off flags) call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=m, 1=ft bra TFT_ceiling_GF_tissue_metric ; 0 - meter ;bra TFT_ceiling_GF_tissue_imperial ; 1 - feet TFT_ceiling_GF_tissue_imperial: call convert_cm_to_feet ; convert value in hi:lo from [cm] to [feet] output_999 ; print (0-999) bra TFT_ceiling_GF_tissue0 ; continue TFT_ceiling_GF_tissue_metric: bsf omit_digit_1 ; do not print 1st digit bsf decimal_digit2 ; place a decimal point in front of digit 2 bsf leftbind ; print left-aligned output_65535 ; print (xxx.x-) bra TFT_ceiling_GF_tissue0 ; continue TFT_ceiling_GF_tissue0: PUTC_PRINT " " ; append a space and dump to screen ; show tissue diagram rcall TFT_dive_tissues ; show tissue pressure diagram ; show current supersaturation WIN_MEDIUM dm_custom_clock_column+.3, dm_custom_gf_row MOVII int_O_lead_supersat,mpr ; bank-safe copy of leading tissue's supersaturation call TFT_color_code_supersat ; color-code output output_256 ; need to print lo only, int_O_lead_supersat value is limited to 255 PRINT ; dump to screen WIN_STD dm_custom_clock_column+.40, dm_custom_gf_row+.5 PUTC_PRINT "%" ; print "%" and dump to screen return ; done ;------------------------------------------------------------------------- ; Draw saturation graph in dive mode custom view ; TFT_dive_tissues: ; draw outer frame movf pallet_color_memo,W ; get color into WREG WIN_FRAME_COLOR dm_custom_tissue_diagram_top, dm_custom_tissue_diagram_bottom, dm_custom_tissue_diagram_left, .159 ; outer frame ; clear area showing leading tissue number as it may not be printed over WIN_BOX_BLACK dm_custom_tissue_diagram_top+.16, dm_custom_tissue_diagram_top+.16+.10, dm_custom_tissue_diagram_left+.32, dm_custom_tissue_diagram_left+.32+.8 ; top, bottom, left, right TFT_dive_tissues_1: ; common initialization for tissue pressures and saturation movlw .1 movwf win_height ; hight of the bargraph (0-239) movlw dm_custom_tissue_diagram_left+.3 ; get dive mode left start position movwf win_leftx2 ; set column left (0-159) movlw .159-dm_custom_tissue_diagram_left-.4 ; get max width movwf win_width+0 ; set width (low byte) clrf win_width+1 ; high byte of with is always zero movlw color_cyan ; color for tissues with decreasing pressure movwf ex ; store in ex movlw color_orange ; color for tissues with increasing pressure movwf ul ; store in ul ; draw combined or N2 tissue pressures lfsr FSR2,char_O_tissue_pressure ; load base address of combined pressures by default IFDEF _helium btfsc tissue_graphic_layout ; shall show N2+He ? lfsr FSR2,char_O_tissue_pres_N2 ; YES - load base address of N2 pressures ENDIF movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter TFT_dive_tissues_N2_loop: movlw dm_custom_tissue_diagram_top+.3 ; dive mode top start position N2 rcall TFT_dive_tissues_bargraph ; draw tissue bargraph incf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_dive_tissues_N2_loop ; NO - loop IFDEF _helium btfsc tissue_graphic_layout ; shall show N2+He ? bra TFT_dive_tissues_3 ; YES - show He tissue pressures ENDIF ; draw tissue saturations lfsr FSR2,char_O_tissue_saturation ; load base address of tissue supersaturation movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter movlw color_grey ; color for tissue saturation, alternative: color_lightblue movwf ex ; store in ex ; movlw color_yellow ; 2nd color is not used by tissue saturation ; movwf ul ; ... TFT_dive_tissues_sat_loop: movlw dm_custom_tissue_diagram_top+.25 ; dive mode top start position saturations rcall TFT_dive_tissues_bargraph ; draw tissue bargraph incf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_dive_tissues_sat_loop ; NO - loop ; common part for vertical lines movlw dm_custom_tissue_diagram_top+.25 ; get top position movwf win_top ; set top position (0-239) movlw .15 ; get hight movwf win_height ; set height movlw .1 ; get width movwf win_width+0 ; set width, low byte clrf win_width+1 ; set width, high byte ; print 100% line movlw dm_custom_tissue_diagram_left+.36 ; get left position movwf win_leftx2 ; set left position (0-159) movlw color_red ; color for 100% line BOX_COLOR ; draw line ; GF factors enabled? btfss tissue_graphic_gf ; shall show GF lines? bra TFT_dive_tissues_4 ; NO - continue with number of leading tissue ; print GF low line movlw dm_custom_tissue_diagram_left+.3 ; get left base position movwf win_leftx2 ; set left base position (0-159) movff char_I_GF_Low_percentage,WREG ; get GF low in 0.01 % mullw .82 ; multiply with 82 movf PRODH,W ; divide by 256 -> resulting scale factor is 82/256 = 0.3203125 addwf win_leftx2,F ; add to base position movlw color_green ; color for GF low line BOX_COLOR ; draw line ; print GF high line movlw dm_custom_tissue_diagram_left+.3 ; get left base position movwf win_leftx2 ; set left base position (0-159) movff char_I_GF_High_percentage,WREG ; get GF high in 0.01 % mullw .82 ; multiply with 82 movf PRODH,W ; divide by 256 -> resulting scale factor is 82/256 = 0.3203125 addwf win_leftx2,F ; add to base position movlw color_yellow ; color for GF high line BOX_COLOR ; draw line bra TFT_dive_tissues_4 ; continue with number of leading tissue IFDEF _helium TFT_dive_tissues_3: ; draw He tissues pressures lfsr FSR2,char_O_tissue_pres_He ; load base address of He pressures movlw dm_custom_tissue_diagram_left+.7 ; get dive mode left start position for He bars movwf win_leftx2 ; set column left (0-159) movlw .159-dm_custom_tissue_diagram_left-.8 ; get max width for He bars movwf win_width+0 ; set width (low byte) clrf win_width+1 ; ... movlw d'16' movwf lo ; tissue counter, 16 tissues clrf hi ; row counter TFT_dive_tissues_He_loop: movlw dm_custom_tissue_diagram_top+.25 ; dive mode top start position H2 rcall TFT_dive_tissues_bargraph ; draw tissue bargraph incf hi,F ; increment row counter decfsz lo,F ; decrement tissue counter, done? bra TFT_dive_tissues_He_loop ; NO - loop ENDIF TFT_dive_tissues_4: ; print number of leading tissue ; TODO: some flicker due to overwriting by tissue bars movff int_O_lead_supersat+0,WREG ; get current leading tissue's supersaturation (only low byte used for value) tstfsz WREG ; current supersaturation = 0 ? bra TFT_dive_tissues_5 ; NO - print number of leading tissue movff char_O_deco_info,WREG ; YES - get deco info vector btfss WREG,deco_ceiling ; - do we have a ceiling obligation? return ; NO - can ascent directly, don't print number, set standard color and return ; YES - print number of leading tissue TFT_dive_tissues_5: movff char_O_lead_tissue,lo ; get number of leading tissue as 0-15 incf lo,F ; adjust to 1-16 movlw .10 cpfsgt lo ; is it > 10 ? bra TFT_dive_tissues_6 ; NO - will output a single digit number ; start position for a 2 digit number WIN_TINY dm_custom_tissue_diagram_left+.32,dm_custom_tissue_diagram_top+.10 bra TFT_dive_tissues_7 TFT_dive_tissues_6: ; start position for a 1 digit number WIN_TINY dm_custom_tissue_diagram_left+.32+.4,dm_custom_tissue_diagram_top+.10 TFT_dive_tissues_7: FONT_COLOR_MEMO ; set output color bsf leftbind ; print left-aligned output_99 ; print tissue number (0-99) PRINT ; dump buffer to screen return ; done ; Helper Function - draw a bargraph TFT_dive_tissues_bargraph: addwf hi,W ; add row number to start position movwf win_top ; set as row top (0-239) movff POSTINC2,up ; get tissue value movf ex,W ; default color btfsc up,7 ; check if flag in bit 7 is set movf ul,W ; YES - switch to 2nd color bcf up,7 ; clear flag bit bcf STATUS,C ; clear carry bit rrcf up,F ; divide by 2 movff up,win_bargraph ; set bargraph length incf win_bargraph,F ; add a bit for a minimum visible bar BOX_COLOR ; draw bargraph return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - CNS - Mask ; global TFT_CNS_mask TFT_CNS_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_cns3_column1, dm_custom_cns3_title_row STRCPY_TEXT_PRINT tCNSsurf ; print label WIN_TINY dm_custom_cns3_column2, dm_custom_cns3_title_row IFDEF _cave_mode btfss cave_mode ; cave mode switched on? bra TFT_CNS_mask_col2 ; NO STRCPY_TEXT_PRINT tCNScave ; YES - print cave TTS label bra TFT_CNS_mask_col3 ; - continue with 3rd column ENDIF TFT_CNS_mask_col2: btfsc FLAG_oc_mode ; in OC mode? bra TFT_CNS_mask_ftts ; YES - print fTTS label btfsc bailout_mode ; NO - in bailout? bra TFT_CNS_mask_ftts ; YES - print fTTS label (label will be printed, but a fTTS will actually not be calculated) TSTOSS opt_calc_gasvolume ; NO - bailout volume calculation requested? bra TFT_CNS_mask_ftts ; NO - print fTTS label ;bra TFT_CNS_mask_bo ; YES - print bailout label TFT_CNS_mask_bo: STRCPY_TEXT_PRINT tCNSBO ; print bailout label bra TFT_CNS_mask_col3 ; continue with 3rd column TFT_CNS_mask_ftts: STRCPY_TEXT_PRINT tCNSfTTS ; print fTTS label ;bra TFT_CNS_mask_col3 ; continue with 3rd column TFT_CNS_mask_col3: WIN_TINY dm_custom_cns3_column3, dm_custom_cns3_title_row STRCPY_TEXT_PRINT tCNSnow ; print CNS now label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - CNS - Data ; global TFT_CNS TFT_CNS: ; CNS at end of normal dive WIN_STD dm_custom_cns3_column1+.3,dm_custom_cns3_row MOVII int_O_CNS_norm,mpr ; get CNS at end of dive in normal plan call TFT_color_code_cns ; color-code the CNS value bsf leftbind ; print left-aligned output_999 ; print (0-999) STRCAT_PRINT "% " ; append unit and trailing space and dump to screen ; fTTS / Bailout CNS, if enabled WIN_STD dm_custom_cns3_column2+.2,dm_custom_cns3_row btfsc bailout_mode ; in bailout? bra TFT_CNS_3 ; YES - show "---" TSTOSS opt_calc_gasvolume ; NO - bailout volume calculation requested? bra TFT_CNS_1 ; NO - continue checking fTTS extra time btfss FLAG_oc_mode ; YES - in OC mode? bra TFT_CNS_2 ; NO - show CNS% ;bra TFT_CNS_1 ; YES - continue checking fTTS extra time TFT_CNS_1: ; not in bailout, no volume calculation, and/or in OC mode TSTOSS char_I_extra_time ; fTTS extra time configured? bra TFT_CNS_3 ; NO - show "---" ;bra TFT_CNS_2 ; YES - show CNS% TFT_CNS_2: MOVII int_O_CNS_alt,mpr ; get CNS at end of dive in alternative plan call TFT_color_code_cns ; color-code the CNS value bsf leftbind ; print left-aligned output_999 ; print (0-999) STRCAT_PRINT "% " ; append unit and trailing space and dump to screen bra TFT_CNS_4 ; continue TFT_CNS_3: IFDEF _cave_mode btfss cave_mode ; cave mode switched on? bra TFT_CNS_3a ; NO - show dashes btfsc backtrack_entire_full ; YES - cave mode shut down due to storage fully used up? bra TFT_CNS_3a ; YES - show dashes btfss dive_turned ; NO - dive turned? bra TFT_CNS_2 ; NO - show cave CNS ;bra TFT_CNS_3a ; YES - show dashes ENDIF TFT_CNS_3a: FONT_COLOR_MEMO ; select color STRCPY_PRINT "--- " ; print non-avail symbol ;bra TFT_CNS_4 ; continue TFT_CNS_4: ; current CNS WIN_STD dm_custom_cns3_column3+.3,dm_custom_cns3_row MOVII int_O_CNS_current,mpr ; get current CNS call TFT_color_code_cns ; color-code the CNS value bsf leftbind ; print left-aligned output_999 ; print (0-999) PUTC_PRINT "%" ; append unit and dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - ppO2, EAD/END & Gas Density - Mask ; global TFT_ppo2_ead_end_cns_mask TFT_ppo2_ead_end_cns_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_ppo2_column-.2,dm_custom_ppo2_title_row STRCPY_TEXT_PRINT tppO2 ; print label WIN_TINY dm_custom_ead_column,dm_custom_eadend_title_row STRCPY_TEXT_PRINT tDiveEAD_END ; print label IFDEF _ccr_pscr WIN_TINY dm_custom_cns_column-.5,dm_custom_eadend_title_row STRCPY_TEXT_PRINT tGasDensity ; print label ELSE WIN_TINY dm_custom_cns_column,dm_custom_cns_title_row STRCPY_TEXT_PRINT tCNS2 ; print label ENDIF return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - ppO2, EAD/END & Gas Density - Data ; global TFT_ppo2_ead_end_cns TFT_ppo2_ead_end_cns: ; show ppO2 WIN_MEDIUM dm_custom_ppo2_column, dm_custom_ppo2_row MOVII int_O_breathed_ppO2,mpr ; copy ppO2 of the currently breathed gas to hi:lo call TFT_color_code_ppo2 ; color-code output bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print ppO2 (0.00-9.99) PRINT ; dump to screen ; show END/EAD FONT_COLOR_MEMO ; select color WIN_SMALL dm_custom_ead_column, dm_custom_ead_row STRCPY_TEXT tEAD ; print "EAD:" MOVII int_O_EAD_pres,mpr ; copy EAD in [mbar] to MPR rcall TFT_end_ead_common ; convert to depth, print and limit to 8 chars WIN_SMALL dm_custom_end_column, dm_custom_end_row STRCPY_TEXT tEND ; print "END:" MOVII int_O_END_pres,mpr ; copy END in [mbar] to MPR rcall TFT_end_ead_common ; convert to depth, print and limit to 8 chars IFDEF _helium ; show gas density WIN_MEDIUM dm_custom_cns_column-.5, dm_custom_cns_row MOVII int_O_gas_density,mpr ; get current gas density call TFT_color_code_cns ; color-code output bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print (0.00-9.99) PRINT ; dump to screen ELSE ; show CNS WIN_STD dm_custom_cns_column+.3, dm_custom_cns_row MOVII int_O_CNS_current,mpr ; get current CNS call TFT_color_code_cns ; color-code CNS output bsf leftbind ; print left-aligned output_999 ; print (0-999) PUTC_PRINT "%" ; append unit and dump buffer to screen ENDIF return ; done ; Helper Function - convert to depth, print and limit to 8 chars TFT_end_ead_common: call convert_pres_to_depth ; convert pressure in [mbar] to depth in [cm] TSTOSS opt_units ; 0=Meter, 1=Feet bra TFT_end_ead_common_metric ; 0: meter ;bra TFT_end_ead_common_imperial ; 1: feet TFT_end_ead_common_imperial: call convert_cm_to_feet ; convert depth in [cm] to depth in [feet] output_999 ; print (0-999) PRINT ; dump buffer to screen return ; done TFT_end_ead_common_metric: bsf omit_digit_2 ; do not print 2nd and 1st digit output_65535 ; print (0xx-655xx) PUTC_PRINT 'm' ; append unit and dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - GF Factors (Mask only) ; global TFT_gf_factors_mask TFT_gf_factors_mask: FONT_COLOR_MASK ; select color ; show labels WIN_TINY dm_custom_gf_column1,dm_custom_gf_title_row STRCPY_TEXT_PRINT tGFactors WIN_TINY dm_custom_gf_column3,dm_custom_gf_title_row STRCPY_TEXT_PRINT taGFactors ; show GF (static) WIN_STD dm_custom_gf_column1, dm_custom_gf_row FONT_COLOR_DISABLED ; default to disabled color btfss use_aGF ; shall use alternative GF factors? FONT_COLOR_MEMO ; NO - switch to memo color movff opt_GF_low, lo ; get normal GF low movff opt_GF_high,hi ; get normal GF high rcall TFT_gf_factors_mask_helper ; print GFs ; show aGF (static) FONT_COLOR_MEMO ; select memo color TSTOSS opt_enable_aGF ; are alternative GF factors enabled? bra TFT_gf_factors_mask_3 ; NO - show "---" and return ; bra TFT_gf_factors_mask_0 ; YES - show arrow TFT_gf_factors_mask_0: WIN_STD dm_custom_gf_column2, dm_custom_gf_row btfss use_aGF ; shall use aGF? bra TFT_gf_factors_mask_1L ; NO - print "<- " ;bra TFT_gf_factors_mask_1R ; YES - print " ->" TFT_gf_factors_mask_1R: STRCPY_PRINT " ->" ; print " ->" bra TFT_gf_factors_mask_2 ; continue TFT_gf_factors_mask_1L: STRCPY_PRINT "<- " ; print "<- " ;bra TFT_gf_factors_mask_2 ; continue TFT_gf_factors_mask_2: WIN_STD dm_custom_gf_column3, dm_custom_gf_row ;FONT_COLOR_MEMO ; select memo color (still selected) btfss use_aGF ; shall use aGF? FONT_COLOR_DISABLED ; NO - switch to disabled color movff opt_aGF_low, lo ; get aGF low movff opt_aGF_high,hi ; get aGF high rcall TFT_gf_factors_mask_helper ; print GFs return ; done TFT_gf_factors_mask_3: WIN_STD dm_custom_gf_column3+.10, dm_custom_gf_row STRCPY_PRINT "---" ; print not-avail symbol return ; done ; Helper Function - print GF pair TFT_gf_factors_mask_helper: output_256 ; print GF low (0-255) PUTC "/" ; print "/" movff hi,lo ; get GF high output_256 ; print GF high (0-255) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Clock, Battery & Surface Pressure - Mask ; global TFT_clock_batt_surfpress_mask TFT_clock_batt_surfpress_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_clock_column, dm_custom_clock_title_row STRCPY_TEXT_PRINT tTime ; "Time" WIN_TINY dm_custom_battery_column, dm_custom_battery_title_row STRCPY_TEXT_PRINT tBattery ; "Battery" WIN_TINY dm_custom_surfpres_column+.8, dm_custom_surfpres_title_row STRCPY_TEXT_PRINT tSurface ; "Surface" ; show configured surface pressure (done in mask, because it's static during the dive) WIN_SMALL dm_custom_surfpres_column, dm_custom_surfpres_row FONT_COLOR_MEMO ; select color MOVII pressure_surf,mpr ; get surface pressure output_65535 ; print (5 digits, first one used as spacer) PUTC ' ' ; print a space STRCAT_TEXT_PRINT tMBAR ; append unit and dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Clock, Battery & Surface Pressure - Data ; global TFT_clock_batt_surfpress TFT_clock_batt_surfpress: ; update clock WIN_SMALL dm_custom_clock_column, dm_custom_clock_row FONT_COLOR_MEMO ; select color SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of date and time movff rtc_latched_hour,lo ; get hours output_99 ; print hours (0-99) PUTC ':' ; print ":" movff rtc_latched_mins,lo ; get minutes output_99x ; print minutes (00-99) PUTC ":" ; print ":" movff rtc_latched_secs,lo ; get seconds output_99x ; print seconds (00-99) PRINT ; dump to screen ; show battery voltage WIN_SMALL dm_custom_battery_column, dm_custom_battery_volt_row ;FONT_COLOR_MEMO ; select color MOVII batt_voltage,mpr ; get voltage bsf decimal_digit3 ; place a decimal point in front of digit 3 bsf omit_digit_1 ; do not print 1st digit output_9999 ; print voltage (0.00x-9.99x) PUTC_PRINT 'V' ; append unit and dump to screen ; show battery percent WIN_SMALL dm_custom_battery_column+.7, dm_custom_battery_percent_row call TFT_color_code_battery ; color-code according to battery_low_condition flag movff batt_percent,lo ; get battery % output_256 ; print battery % (0-999) PUTC_PRINT "%" ; append unit and dump to screen ; surface pressure is shown via the mask because it is static return ; done IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Dive Custom View - Sensor Check - Mask ; global TFT_sensor_check_mask TFT_sensor_check_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_s_check_title_column, dm_custom_s_check_title_row STRCPY_TEXT_PRINT tSensorCheck ; print label WIN_TINY dm_custom_ppO2_column, dm_custom_s_check_title_row STRCPY_TEXT_PRINT tppO2O2 ; print label WIN_TINY dm_custom_ppDil_column, dm_custom_s_check_title_row STRCPY_TEXT_PRINT tppO2Dil ; print label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Sensor Check - Data ; global TFT_sensor_check TFT_sensor_check: ; show ppO2 of O2 in this depth WIN_MEDIUM dm_custom_ppO2_column, dm_custom_s_check_row MOVII int_O_O2_ppO2,mpr ; copy ppO2 of pure O2 to hi:lo rcall TFT_sensor_check_helper ; print ppO2 ; show ppO2 of the diluent in this depth WIN_MEDIUM dm_custom_ppDil_column, dm_custom_s_check_row MOVII int_O_pure_ppO2,mpr ; copy ppO2 of pure gas to hi:lo rcall TFT_sensor_check_helper ; print ppO2 return ; done TFT_sensor_check_helper: call TFT_color_code_ppo2 ; color-code output bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print ppO2 (0.00-9.99) PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - pSCR Info - Mask ; global TFT_pscr_info_mask TFT_pscr_info_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_pscr_drop_column, dm_custom_pscr_title_row STRCPY_TEXT_PRINT tPSCR_O2_drop ; print label WIN_TINY dm_custom_pscr_ratio_column, dm_custom_pscr_title_row STRCPY_TEXT_PRINT tPSCR_lungratio ; print label WIN_TINY dm_custom_ppo2_column-.2,dm_custom_ppo2_title_row btfsc bailout_mode ; in bailout? bra TFT_pscr_info_mask_2 ; YES ;bra TFT_pscr_info_mask_1 ; NO TFT_pscr_info_mask_1: STRCPY_TEXT_PRINT tppO2Mix ; print "ppO2(Mix)" return ; done TFT_pscr_info_mask_2: STRCPY_TEXT_PRINT tppO2 ; print "ppO2" return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - pSCR Info - Data ; global TFT_pscr_info TFT_pscr_info: ;show ppO2 WIN_MEDIUM dm_custom_ppo2_column,dm_custom_ppo2_row MOVII int_O_pSCR_ppO2,mpr ; copy pSCR ppO2 to hi:lo call TFT_color_code_ppo2 ; color-code output bsf decimal_digit2 ; place a decimal point in front of digit 2 output_999 ; print ppO2 (0.00-9-99) PRINT ; dump to screen ; show drop WIN_STD dm_custom_pscr_drop_column+.11,dm_custom_pscr_row FONT_COLOR_MEMO ; select color movff char_I_PSCR_drop,lo ; get drop output_99 ; print drop (0-99) PUTC_PRINT "%" ; append unit and dump to screen ; show lung ratio WIN_STD dm_custom_pscr_ratio_column+.5,dm_custom_pscr_row ;FONT_COLOR_MEMO ; select color movff char_I_PSCR_lungratio,lo ; get ratio STRCPY "1/" ; print "1/" bsf leftbind ; print left-aligned output_256 ; print ratio number (0-256) PRINT ; dump to screen return ; done ENDIF ; _ccr_psrc IFDEF _external_sensor ;----------------------------------------------------------------------------- ; Dive Custom View - Sensor ppO2 - Mask ; global TFT_ppo2_sensors_mask TFT_ppo2_sensors_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_hud_sensor1_column+.4,dm_custom_hud_title_row STRCPY_TEXT_PRINT tDiveHudMask1 ; print label WIN_TINY dm_custom_hud_sensor2_column+.3,dm_custom_hud_title_row STRCPY_TEXT_PRINT tDiveHudMask2 ; print label WIN_TINY dm_custom_hud_sensor3_column+.2,dm_custom_hud_title_row STRCPY_TEXT_PRINT tDiveHudMask3 ; print label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Sensor ppO2 - Data ; ; Definition of the output: ; ; sensorX use voting o2 ; _calibrated _O2 _logic _ppo2 Output Color ; _ok _sensorX _sensorX _sensorX ;----------------------------------------------------------------------------------------------- ; 0 -/- -/- -/- "----" memo ; 1 0 -/- = 0 o2_ppo2_sensorX attention ; 1 0 -/- > 0 o2_ppo2_sensorX disabled ; 1 1 0 -/- o2_ppo2_sensorX TFT_color_code_ppo2_hud + win_invert ; 1 1 1 -/- o2_ppo2_sensorX TFT_color_code_ppo2_hud ; global TFT_ppo2_sensors TFT_ppo2_sensors: ; sensor 1 TFT_ppo2_sensors_1: btfsc sensor1_calibrated_ok ; valid calibration? bra TFT_ppo2_sensors_1b ; YES btfsc sensor1_active ; NO - valid HUD data for this sensor? bra TFT_ppo2_sensors_1b ; YES ;bra TFT_ppo2_sensors_1a ; NO TFT_ppo2_sensors_1a: ; no valid calibration WIN_STD dm_custom_hud_sensor1_column+.7, dm_custom_hud_row+.5 FONT_COLOR_MEMO ; set color STRCPY_PRINT "---" ; print dashes bra TFT_ppo2_sensors_2 ; continue with sensor 2 TFT_ppo2_sensors_1b: ; sensor has a valid calibration WIN_MEDIUM dm_custom_hud_sensor1_column,dm_custom_hud_row movff sensor1_ppO2,lo ; load ppO2 value into transfer storage for output btfsc use_O2_sensor1 ; in use? bra TFT_ppo2_sensors_1d ; YES tstfsz lo ; NO - sensor value = 0 ? bra TFT_ppo2_sensors_1c ; NO FONT_COLOR_ATTENTION ; YES - set attention color bra TFT_ppo2_sensors_1e ; - print ppO2 value TFT_ppo2_sensors_1c: ; sensor has valid calibration, is not in use and has a value > 0 FONT_COLOR_DISABLED ; set disabled color bra TFT_ppo2_sensors_1e ; print ppO2 value TFT_ppo2_sensors_1d: ; sensor has valid calibration and is in use call TFT_color_code_ppo2_hud ; color-code with ppO2 [cbar] in lo btfsc voting_logic_sensor1 ; sensor value agrees with values of other sensors? bra TFT_ppo2_sensors_1e ; YES bsf win_invert ; NO - invert output ;bra TFT_ppo2_sensors_1e ; print ppO2 value TFT_ppo2_sensors_1e: ; all coloring is set up now, let's write the value to the display! bsf decimal_digit2 ; place a decimal point in front of digit 2 output_256 ; print (0.00-2.55) PRINT ; dump to screen ; sensor 2 TFT_ppo2_sensors_2: btfsc sensor2_calibrated_ok ; valid calibration? bra TFT_ppo2_sensors_2b ; YES btfsc sensor2_active ; NO - valid HUD data for this sensor? bra TFT_ppo2_sensors_2b ; YES ;bra TFT_ppo2_sensors_2a ; NO TFT_ppo2_sensors_2a: ; no valid calibration WIN_STD dm_custom_hud_sensor2_column+.7, dm_custom_hud_row+.5 FONT_COLOR_MEMO ; set color STRCPY_PRINT "---" ; print dashes bra TFT_ppo2_sensors_3 ; continue with sensor 3 TFT_ppo2_sensors_2b: ; sensor has a valid calibration WIN_MEDIUM dm_custom_hud_sensor2_column,dm_custom_hud_row movff sensor2_ppO2,lo ; load ppO2 value into transfer storage for output btfsc use_O2_sensor2 ; in use? bra TFT_ppo2_sensors_2d ; YES tstfsz lo ; NO - sensor value = 0? bra TFT_ppo2_sensors_2c ; NO FONT_COLOR_ATTENTION ; YES - print in attention color bra TFT_ppo2_sensors_2e ; - print ppO2 value TFT_ppo2_sensors_2c: ; sensor has valid calibration, is not in use and has a value > 0 FONT_COLOR_DISABLED ; output in light blue bra TFT_ppo2_sensors_2e ; print ppO2 value TFT_ppo2_sensors_2d: ; sensor has valid calibration and is in use call TFT_color_code_ppo2_hud ; color-code with ppO2 [cbar] in lo btfsc voting_logic_sensor2 ; sensor value agrees with values of other sensors? bra TFT_ppo2_sensors_2e ; YES bsf win_invert ; NO - invert output ;bra TFT_ppo2_sensors_2e ; - print ppO2 value TFT_ppo2_sensors_2e: ; all coloring is set up now, let's write the value to the display! bsf decimal_digit2 ; place a decimal point in front of digit 2 output_256 ; print (0.00-2.55) PRINT ; dump to screen ; sensor 3 TFT_ppo2_sensors_3: btfsc sensor3_calibrated_ok ; valid calibration? bra TFT_ppo2_sensors_3b ; YES btfsc sensor3_active ; NO - valid HUD data for this sensor? bra TFT_ppo2_sensors_3b ; YES ;bra TFT_ppo2_sensors_3a ; NO TFT_ppo2_sensors_3a: WIN_STD dm_custom_hud_sensor3_column+.7, dm_custom_hud_row+.5 FONT_COLOR_MEMO ; set color STRCPY_PRINT "---" ; print dashes bra TFT_ppo2_sensors_4 ; done TFT_ppo2_sensors_3b: ; sensor has a valid calibration WIN_MEDIUM dm_custom_hud_sensor3_column,dm_custom_hud_row movff sensor3_ppO2,lo ; load ppO2 value into transfer storage for output btfsc use_O2_sensor3 ; in use? bra TFT_ppo2_sensors_3d ; YES tstfsz lo ; NO - sensor value = 0? bra TFT_ppo2_sensors_3c ; NO FONT_COLOR_ATTENTION ; YES - print in attention color bra TFT_ppo2_sensors_3e ; - print ppO2 value TFT_ppo2_sensors_3c: ; sensor has valid calibration, is not in use and has a value > 0 FONT_COLOR_DISABLED ; print in disabled color bra TFT_ppo2_sensors_3e ; print ppO2 value TFT_ppo2_sensors_3d: ; sensor has valid calibration and is in use call TFT_color_code_ppo2_hud ; color-code with ppO2 [cbar] in lo btfsc voting_logic_sensor3 ; sensor value agrees with values other sensors? bra TFT_ppo2_sensors_3e ; YES bsf win_invert ; NO - invert output ;bra TFT_ppo2_sensors_3e ; - print ppO2 value TFT_ppo2_sensors_3e: ; all coloring is set up now, let's write the value to the display! bsf decimal_digit2 ; place a decimal point in front of digit 2 output_256 ; print (0.00-2.55) PRINT ; dump to screen TFT_ppo2_sensors_4: return ; done ENDIF ; _external_sensor IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Dive Custom View - Pressures & SAC - Mask ; global TFT_pressures_SAC_mask TFT_pressures_SAC_mask: FONT_COLOR_MASK ; select color ; pressure reading 1 WIN_TINY dm_custom_tankdata_pres1_col, dm_custom_tankdata_mask_row movff char_I_pressure_gas+0,WREG ; =0: disabled, =1..10: gases/dils bcf aux_flag ; selector for disabled / need set to disabled rcall TFT_pressures_SAC_mask_h1 ; print gas composition or " ---" if disabled ; pressure reading 2 WIN_TINY dm_custom_tankdata_pres2_col, dm_custom_tankdata_mask_row movff char_I_pressure_gas+1,WREG ; =0: need to reading 1, =1..10: gases/dils bsf aux_flag ; selector for disabled / need set to need rcall TFT_pressures_SAC_mask_h1 ; print gas composition or "Need " if 0 ; SAC rate WIN_TINY dm_custom_tankdata_SAC_col, dm_custom_tankdata_mask_row STRCPY_TEXT tSAC ; "SAC STRCAT " (" ; ( STRCAT_TEXT tLitersMinute ; l/min PUTC_PRINT ")" ; )" return ; done ; Helper Function - print gas composition or " ---" if disabled TFT_pressures_SAC_mask_h1: tstfsz WREG ; pressure reading assigned? bra TFT_pressures_SAC_mask_h2 ; YES - print gas composition btfsc aux_flag ; NO - check auxiliary flag bra TFT_pressures_SAC_mask_h3 ; 1 - print "Need " STRCAT_PRINT " ---" ; 0 - print " ---" return ; - done TFT_pressures_SAC_mask_h2: decf WREG,W ; (1..10) -> (0..9) bsf short_gas_descriptions ; just "Air", "O2" or "xx/yy" call gaslist_strcat_mix_WREG ; print composition of gas/dil in WREG (0..9) bra TFT_pressures_SAC_mask_h4 ; finish with adding "(bar)" TFT_pressures_SAC_mask_h3: STRCPY_TEXT tNeed ; "Need" ;bra TFT_pressures_SAC_mask_h4 ; finish with adding "(bar)" TFT_pressures_SAC_mask_h4: STRCAT_PRINT "(bar)" ; print "(bar)" return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Pressures & SAC - Data ; global TFT_pressures_SAC TFT_pressures_SAC: ; check mode for second reading bcf aux_flag ; clear auxiliary flag by default (reading 2 is pressure) movff char_I_pressure_gas+1,WREG ; =0: need to reading 1, =1..10: gases/dils addlw .0 ; dummy operation to set status register flags btfsc STATUS,Z ; gas selected = 0 (i.e. no 2nd pressure reading) ? bsf aux_flag ; YES - set auxiliary flag (display position of reading 2 shall show need to reading 1) ; get data of reading 1 movff int_IO_pressure_value+0,lo ; copy pressure 1 to hi:lo movff int_IO_pressure_value+1,hi ; ... movff char_I_pressure_stat+0,ex ; copy status data ; pressure of reading 1 WIN_STD dm_custom_tankdata_pres1_col+.4,dm_custom_tankdata_row rcall TFT_pressures_SAC_helper_1 ; print pressure if available, else " ---" ; battery status of reading 1 WIN_SMALL dm_custom_hud_sensor1_column+.4+.36,dm_custom_tankdata_row rcall TFT_pressures_SAC_helper_2 ; print or clear down arrow as low bat indicator ; get data for reading 2 btfsc aux_flag ; shall reading 2 show need to reading 1 ? bra TFT_pressures_SAC_1 ; YES movff int_IO_pressure_value+2,lo ; NO - copy pressure 2 to hi:lo movff int_IO_pressure_value+3,hi ; - ... movff char_I_pressure_stat+1,ex ; - copy status data bra TFT_pressures_SAC_2 ; - continue TFT_pressures_SAC_1: MOVII int_O_pressure_need,mpr ; copy need to pressure 1 to hi:lo clrf ex ; set status data to 0 bra TFT_pressures_SAC_2 ; continue TFT_pressures_SAC_2: ; pressure of reading 2 WIN_STD dm_custom_tankdata_pres2_col+.2,dm_custom_tankdata_row rcall TFT_pressures_SAC_helper_1 ; print pressure if available, else " ---" ; battery status of reading 2 WIN_SMALL dm_custom_tankdata_pres2_col+.2+.36,dm_custom_tankdata_row rcall TFT_pressures_SAC_helper_2 ; print or clear down arrow as low bat indicator TFT_pressures_SAC_3: ; SAC WIN_STD dm_custom_tankdata_SAC_col+.6,dm_custom_tankdata_row MOVII int_O_SAC_measured,mpr ; copy measured SAC rate to hi:lo btfsc hi,int_not_avail_flag ; SAC rate available? bra TFT_pressures_SAC_4 ; NO - print " --.-" call TFT_color_code_pres_sac ; color-code the output bsf decimal_digit1 ; place a decimal point in front of digit 1 output_999 ; print (0.0-99.9) PRINT ; dump to screen return ; done TFT_pressures_SAC_4: FONT_COLOR_DISABLED ; set color STRCAT_PRINT "--.-" ; output for no SAC data available return ; done ; Helper Function - print pressure if available, else " ---" TFT_pressures_SAC_helper_1: btfss hi,int_not_avail_flag ; pressure available? bra TFT_pressures_SAC_helper_1a ; YES - print pressure FONT_COLOR_DISABLED ; NO - use disabled color as default ; btfsc ex,char_transmitter_lost ; - transmitter lost? ; FONT_COLOR_ATTENTION ; YES - use attention color STRCAT_PRINT " ---" ; - print " ---" return TFT_pressures_SAC_helper_1a: btfsc hi,int_warning_flag ; out of range (signaled by warning flag)? bra TFT_pressures_SAC_helper_1c ; YES - special treatment call TFT_color_code_pres_sac ; NO - color-code the output PUTC ' ' ; - add a space bsf omit_digit_1 ; - do not print 1st digit (0.1 bar) output_999 ; - print pressure (0x-999x) PRINT ; - dump buffer to screen return ; - done TFT_pressures_SAC_helper_1c: call TFT_color_code_pres_sac ; color-code the output STRCPY_PRINT ">400" ; print ">400" return ; done ; Helper Function - print or clear down arrow as low bat indicator TFT_pressures_SAC_helper_2: btfss ex,char_transmitter_low_bat ; low battery flag set? bra TFT_pressures_SAC_helper_2b ; NO - clear down arrow (low bat indicator) ;bra TFT_pressures_SAC_helper_2a ; YES - show down arrow (low bat indicator) TFT_pressures_SAC_helper_2a: FONT_COLOR_ATTENTION ; use attention color STRCPY_PRINT "\xb8" ; print down arrow as bat low indication return ; done TFT_pressures_SAC_helper_2b: STRCPY_PRINT " " ; wipe out down arrow (low bat indicator) return ; done ENDIF _rx_functions IFDEF _cave_mode ;----------------------------------------------------------------------------- ; Dive Custom View - Cave Mode TTS, total Stops and Run Time - Mask ; global TFT_cave_tts_mask TFT_cave_tts_mask: FONT_COLOR_MASK ; select color WIN_TINY dm_custom_cave_title_column1,dm_custom_cave_title_row STRCPY_TEXT_PRINT tCaveStops ; print label WIN_TINY dm_custom_cave_title_column2,dm_custom_cave_title_row STRCPY_TEXT_PRINT tCaveTTS ; print label WIN_TINY dm_custom_cave_title_column3,dm_custom_cave_title_row STRCPY_TEXT_PRINT tCaveRuntime ; print label return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Cave Mode TTS, total Stops and Run Time - Data ; global TFT_cave_tts TFT_cave_tts: ; total time of all stops WIN_MEDIUM dm_custom_cave_data_column1,dm_custom_cave_data_row FONT_COLOR_MEMO ; set default color btfss cave_mode ; cave mode switched on? bra TFT_cave_1b ; NO - print dashes MOVII int_O_TST_norm,mpr ; YES - get normal plan total stops time btfss mpr+1,int_not_yet_computed ; - not yet computed? bra TFT_cave_1a ; NO - continue FONT_COLOR_DISABLED ; YES - switch to disabled color bra TFT_cave_1b ; - print dashes TFT_cave_1a: btfsc mpr+1,int_invalid_flag ; stops time invalid? FONT_COLOR_DISABLED ; YES - switch to disabled color bcf mpr+1,int_invalid_flag ; clear invalid flag if applicable movf mpr+0,W ; copy low byte of stops time to WREG iorwf mpr+1,W ; ior with high byte of stops time bz TFT_cave_1b ; print dashes if stops time is zero output_999 ; print (0-999) PUTC_PRINT "'" ; append unit and dump to screen bra TFT_cave_2 ; continue TFT_cave_1b: STRCAT_PRINT ",-,-,-," ; print 3 dashes (',' produces a half-width space) ;bra TFT_cave_2 ; continue TFT_cave_2: ; cave TTS WIN_MEDIUM dm_custom_cave_data_column2,dm_custom_cave_data_row ; column 60 FONT_COLOR_MEMO ; set default color btfsS cave_mode ; cave mode switched on? bra TFT_cave_2b ; NO - print dashes MOVII int_O_TTS_norm,mpr ; YES - get normal plan total time to surface btfss mpr+1,int_not_yet_computed ; - not yet computed? bra TFT_cave_2a ; NO - continue FONT_COLOR_DISABLED ; YES - switch to disabled color bra TFT_cave_2b ; - print dashes TFT_cave_2a: btfsc mpr+1,int_invalid_flag ; TTS invalid? FONT_COLOR_DISABLED ; YES - switch to disabled color bcf mpr+1,int_invalid_flag ; clear invalid flag if applicable output_999 ; print (0-999) PUTC_PRINT "'" ; append unit and dump to screen bra TFT_cave_3 ; continue TFT_cave_2b: STRCAT_PRINT ",-,-,-," ; print 3 dashes (',' produces a half-width space) ;bra TFT_cave_3 ; continue TFT_cave_3: ; estimated total runtime WIN_MEDIUM dm_custom_cave_data_column3,dm_custom_cave_data_row ; ; keep color from cave TTS btfss cave_mode ; cave mode switched on? bra TFT_cave_3b ; NO - print dashes SMOVII counted_divetime_mins,mpr ; YES - ISR safe copy of counted dive time to MPR movff int_O_TTS_norm+0,WREG ; - get TTS, low byte, into WREG addwf mpr+0,F ; - add TTS, low byte, to dive time in MPR movff int_O_TTS_norm+1,WREG ; - get TTS, high byte, into WREG btfsc WREG,int_not_yet_computed ; - not yet computed? bra TFT_cave_3b ; YES - print dashes bcf WREG,int_invalid_flag ; NO - clear invalid flag if applicable addwfc mpr+1,F ; - add TTS, high byte, to dive time in MPR output_999 ; - print (0-999) PUTC_PRINT "'" ; - append unit and dump to screen return ; - done TFT_cave_3b: STRCAT_PRINT ",-,-,-," ; print 3 dashes (',' produces a half-width space) return ; done ;----------------------------------------------------------------------------- ; Dive Custom View - Cave Mode Waypoints ; global TFT_cave_waypoints TFT_cave_waypoints: ; arrow WIN_TINY .70,dm_custom_cave_title_row FONT_COLOR_ATTENTION ; select color btfss cave_mode ; cave mode switched on? bra TFT_cave_waypoints_3 ; NO - do not show any marker (any more) btfsc dive_turned ; YES - dive turned? bra TFT_cave_waypoints_2 ; YES - print marker in the middle ;bra TFT_cave_waypoints_1 ; NO - print marker on right side TFT_cave_waypoints_1: movlw .12 ; start with 12 space chars call TFT_buffer_trim_length ; fill / cut buffer to target length ;bra TFT_cave_waypoints_2 ; continue TFT_cave_waypoints_2: STRCAT "<=====" ; print marker symbol ;bra TFT_cave_waypoints_3 ; continue TFT_cave_waypoints_3: movlw .18 ; set overall number of chars call TFT_buffer_trim_length ; fill / cut buffer to target length PRINT ; dump buffer to screen ; waypoint band btfsc cave_mode ; cave mode switched on? bra TFT_cave_waypoints_4 ; YES - show graphics WIN_STD .0,dm_custom_cave_data_row ; NO - show "Cave Mode off" text FONT_COLOR_ATTENTION ; - select attention color PUTC " " ; - print 2 space chars PUTC " " ; - ... STRCAT_TEXT tCaveMode ; - print "Cave Mode" PUTC " " ; - print 1 space char STRCAT_TEXT tOff ; - print "off" movlw .17 ; - set max number of chars call TFT_buffer_trim_length ; - fill / cut buffer to target length PRINT ; - dump buffer to screen return ; - done TFT_cave_waypoints_4: WIN_MEDIUM .0,dm_custom_cave_data_row; start in column 0 FONT_COLOR_MEMO ; select default color tstfsz DM_flags_cavereq ; any pending cave mode requests? FONT_COLOR_DISABLED ; YES - switch to disabled color ; 1st section: previous waypoint number or beginning line movlw .1 ; load a one into WREG cpfsgt backtrack_waypoint_num ; current waypoint number > 1 ? bra TFT_cave_waypoints_5 ; NO - print line segment only STRCAT ",-," ; YES - print one dash movff backtrack_waypoint_num,lo ; - copy current waypoint number to lo decf lo,F ; - create previous waypoint number output_99 ; - print previous waypoint number in two digit format STRCAT "," ; - print a half-space bra TFT_cave_waypoints_6 ; - continue with next section TFT_cave_waypoints_5: STRCAT ",-,-----" ; print line segment ;bra TFT_cave_waypoints_6 ; continue with next section TFT_cave_waypoints_6: ; 2nd section: solid line STRCAT "---" ; print a solid line ; 3rd section: current waypoint number, turn point symbol or line segment tstfsz backtrack_waypoint_num ; does a current waypoint exist? bra TFT_cave_waypoints_8 ; YES - print its number or the turn point symbol btfss dive_turned ; NO - dive turned? bra TFT_cave_waypoints_7 ; NO - print a separated line segment STRCAT "------" ; YES - print a continuous line bra TFT_cave_waypoints_10 ; - continue with next section TFT_cave_waypoints_7: STRCAT ",----," ; print a separated line segment bra TFT_cave_waypoints_10 ; continue with next section TFT_cave_waypoints_8: STRCAT "," ; print a half-width space movff backtrack_waypoint_num,lo ; copy current waypoint number to lo movf backtrack_waypoint_turn,W ; copy turn point number to WREG cpfseq lo ; current waypoint = turn point ? bra TFT_cave_waypoints_9 ; NO - show waypoint number STRCAT_PRINT "--|, " ; YES - print end-of-line symbol, clear remaining output and dump buffer to screen return ; - done TFT_cave_waypoints_9: movff backtrack_waypoint_num,lo ; copy current waypoint number to lo output_99 ; print current waypoint number in two digit format STRCAT "," ; print a half-space ;bra TFT_cave_waypoints_10 ; continue with next section TFT_cave_waypoints_10: ; 4th section: solid line STRCAT "---" ; print a solid line ; 5th section: next waypoint number or end of line symbol incf backtrack_waypoint_num,W ; load WREG with next waypoint number cpfseq backtrack_waypoint_turn ; next waypoint number = turn point number ? btfsc waypoint_reached_last ; NO - is the current waypoint the last waypoint? bra TFT_cave_waypoints_11 ; YES / YES - print end-of-line symbol STRCAT "," ; NO - print a half-space incf backtrack_waypoint_num,W ; - (re)load WREG with next waypoint number movwf lo ; NO - copy next waypoint number to lo output_99 ; - print next waypoint number in two digit format PRINT ; - dump buffer to screen return ; - done TFT_cave_waypoints_11: STRCAT_PRINT "---|," ; print end-of-line symbol and dump buffer to screen return ; done ENDIF ; _cave_mode ;============================================================================= tft_out15 CODE ;============================================================================= ;----------------------------------------------------------------------------- ; Helper Function - check if firmware is within expiry period ; ; Output: aux_flag set if not ; check_expiry: SMOVSS rtc_year,rtc_latched_year ; ISR-safe 6 byte copy of date and time movff rtc_latched_day,lo ; get current day movff rtc_latched_month,hi ; get current month movff rtc_latched_year,up ; get current year bsf aux_flag ; set firmware as expired by default movlw firmware_expire_year ; start with checking year cpfsgt up ; current year > expiry year ? bra check_expiry_Y ; NO - continue checks return ; YES - expired check_expiry_Y: cpfseq up ; current year = expiry year ? bra check_expiry_ok ; NO - must be < then, OK whatever month & day movlw firmware_expire_month ; YES - continue checking month cpfsgt hi ; current month > expiry month ? bra check_expiry_M ; NO - continue checks return ; YES - expired check_expiry_M: cpfseq hi ; current month = expiry month ? bra check_expiry_ok ; NO - must be < then, OK whatever day movlw firmware_expire_day ; YES - continue checking day cpfsgt lo ; current day > expiry day ? bra check_expiry_ok ; NO - must be <= then, OK return ; YES - expired check_expiry_ok: bcf aux_flag ; not expired return ; done ;----------------------------------------------------------------------------- ; show Firmware updated Message ; ; Attention: ; Pallet colors and language switching are not ; available yet, all text outputs are hard-coded! ; global TFT_message_fw_update TFT_message_fw_update: FONT_COLOR_STANDARD ; set color ; show update message WIN_SMALL .20,.100 ; set position STRCPY_PRINT "Update successful!" ; print message ; show firmware version WIN_SMALL .20,.140 ; set position STRCPY "New Firmware: " ; print message bra TFT_message_fw_common ; show firmware version ;----------------------------------------------------------------------------- ; show Firmware kept Message ; ; Attention: ; Pallet colors and language switching are not ; available yet, all text outputs are hard-coded! ; global TFT_message_fw_kept TFT_message_fw_kept: FONT_COLOR_STANDARD ; set color ; show reboot message WIN_SMALL .60,.100 ; set position STRCPY_PRINT "Reboot" ; print message ; show firmware version WIN_SMALL .30,.140 ; set position STRCPY "Firmware: " ; print message ;bra TFT_message_fw_common ; show firmware version ; Helper Function - show firmware version x.y and color-code + invert if outdated TFT_message_fw_common: rcall TFT_cat_firmware ; append major/minor and color-code on expiry PRINT ; dump to screen ; show firmware beta status WIN_SMALL .60,.180 FONT_COLOR_STANDARD ; set default color for a release version rcall TFT_cat_beta_long ; show "Release" or "BETA" + issue PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; append Firmware Version to current String, including color-coding on expiry ; global TFT_cat_firmware TFT_cat_firmware: movlw fw_version_major ; get major movwf lo ; ... bsf leftbind ; print left-aligned output_99 ; print major (0-99) PUTC '.' ; print a dot movlw fw_version_minor ; get minor movwf lo ; ... output_99x ; print minor in two digit format rcall check_expiry ; check if firmware is expired btfss aux_flag ; expired? return ; NO bsf win_invert ; YES - print in inverse FONT_COLOR color_yellow ; - print in yellow return ; - done ;----------------------------------------------------------------------------- ; append Firmware BETA Status to current String, including color-coding on BETA ; global TFT_cat_beta_long TFT_cat_beta_long: bsf aux_flag ; do long version bra TFT_cat_beta_common ; continue with common part global TFT_cat_beta_short TFT_cat_beta_short: bcf aux_flag ; do short version ;bra TFT_cat_beta_common ; continue with common part TFT_cat_beta_common: IFDEF _DEBUG FONT_COLOR color_red ; set color btfss aux_flag ; shall show long version? bra TFT_cat_debug_short ; NO - show short version ;bra TFT_cat_debug_long ; YES - show long version TFT_cat_debug_long: STRCAT "DEBUG" ; print long debug return ; done TFT_cat_debug_short: STRCAT "DBG." ; print short debug return ; done ELSE movlw fw_version_beta ; =0: release, =1: beta 1, =2: beta 2, ... movwf lo ; copy to lo tstfsz lo ; release version? bra TFT_cat_beta_com ; NO - must be beta version then btfss aux_flag ; YES - shall show long version? bra TFT_cat_beta_rel_short ; NO - show short version rcall check_expiry ; YES - check expiry date btfsc aux_flag ; - within expiry date? bra TFT_cat_beta_update ; NO - give update cue ;bra TFT_cat_beta_rel_long ; YES - "Release" TFT_cat_beta_rel_long: STRCAT "Release" ; print long "Release" return ; done TFT_cat_beta_rel_short: STRCAT "Rel." ; print short "Release" return ; done TFT_cat_beta_com: FONT_COLOR color_yellow ; set color btfss aux_flag ; shall show long version? bra TFT_cat_beta_short_exec ; NO - show short version ;bra TFT_cat_beta_long_exec ; YES - show long version TFT_cat_beta_long_exec: STRCAT "Beta " ; print long "Beta" bra TFT_cat_beta_version ; print version TFT_cat_beta_short_exec: STRCAT "B." ; print short "Beta" ;bra TFT_cat_beta_version ; append beta version number TFT_cat_beta_version: bsf leftbind ; print left-aligned output_256 ; print beta version number (0-255) return ; done TFT_cat_beta_update: FONT_COLOR color_yellow STRCAT "update!" ; print update cue return ; done ENDIF ;----------------------------------------------------------------------------- ; append Serial Number to to current String ; global TFT_cat_serial TFT_cat_serial: call eeprom_serial_number_read ; read OSTC serial number bsf leftbind ; print left-aligned output_65535 ; print serial number return ; done ;----------------------------------------------------------------------------- ; print Serial Number and Firmware Version (used by comm mode) ; global TFT_print_serial_and_firmware TFT_print_serial_and_firmware: STRCPY "#" ; print "#" rcall TFT_cat_serial ; print serial number STRCAT " " ; print a space STRCAT "v" ; print a "v" (version) ;bra TFT_print_firmware ; print firmware version ;----------------------------------------------------------------------------- ; print Firmware Version ; global TFT_print_firmware TFT_print_firmware: rcall TFT_cat_firmware ; print firmware major/minor, will set win_invert if outdated STRCAT " " ; print a space rcall TFT_cat_beta_long ; print release/beta and update notification if expired PRINT ; dump to screen return ; done ;----------------------------------------------------------------------------- ; print Deco Type (OC, CCR, ...) ; ; Input: lo deco type number: 0=OC, 1=CCR, 2=Gauge, 3=Apnea, 4=pSCR ; global TFT_print_decotype TFT_print_decotype: bsf aux_flag ; default to dive with deco calculation (used by logbook) incf lo,W ; WREG = lo + 1 TFT_print_decotype_1 decfsz WREG,W ; in OC mode? bra TFT_print_decotype_2 ; NO - try next STRCAT_TEXT_PRINT tDvOC ; YES - print "OC" return ; - done TFT_print_decotype_2: decfsz WREG,W ; in CCR mode? bra TFT_print_decotype_3 ; NO - try next STRCAT_TEXT_PRINT tDvCC ; YES - print "CCR" return ; - done TFT_print_decotype_3: decfsz WREG,W ; in gauge mode? bra TFT_print_decotype_4 ; NO - try next bcf aux_flag ; YES - dive without deco data STRCAT_TEXT_PRINT tDvGauge ; - Print "Gauge" return ; - done TFT_print_decotype_4: decfsz WREG,W ; in apnea mode? bra TFT_print_decotype_5 ; NO - try next bcf aux_flag ; YES - dive without deco data STRCAT_TEXT_PRINT tDvApnea ; - print "Apnoe" return ; - done TFT_print_decotype_5: STRCAT_TEXT_PRINT tDvPSCR ; print "pSCR" return ; done ;============================================================================= tft_out16 CODE ;============================================================================= global TFT_debug_output TFT_debug_output: IFNDEF _debug_output return ; do nothing ELSE ; btfsc alt_layout_active ; alternative layout active? ; return ; YES - abort WIN_TINY .100,.30 ; surface mode: fits under the textual logo in the upper right corner ; WIN_TINY .35, .0 ; dive mode: fits to the right side of the depth label ; WIN_TINY .0, . 0 ; dive mode: overwrites depth label FONT_COLOR_MEMO ; set color movff ambient_light+0,lo output_256 PUTC "," movff ambient_light+0,lo movff ambient_light+1,hi output_65535 ; ; deco engine scheduling performance ; MOVII int_O_profiling_overrun,mpr ; runtime +/- versus target ; btfss mpr+1,7 ; overrun? ; bra TFT_debug_output_1 ; YES ; bcf mpr+1,7 ; NO - clear flag ; PUTC "-" ; - print a minus ; bra TFT_debug_output_2 ; - continue ;TFT_debug_output_1: ; PUTC " " ; print a space instead of the minus ;TFT_debug_output_2: ; output_999 ; print time (0-999) ; PUTC "." ; print a dot as separator ; MOVII int_O_profiling_overrun_max,mpr ; get max runtime so far ; output_999 ; print (0-999) ; PUTC "." ; print a dot as separator ; movff char_O_profiling_overrun_phase,WREG ; get calculation phase causing the max runtime ; output_hex ; print a hex ; PUTC "." ; print a dot as separator ; movff char_O_profiling_runs_norm,mpr ; get runs/cycle normal plan ; output_99 ; print (0-99) ; PUTC "." ; print a dot as separator ; movff char_O_profiling_runs_alt,mpr ; get runs/cycle alternative plan ; output_99 ; print (0-99) PRINT ; dump to screen return ; done ENDIF ; _debug_output ;----------------------------------------------------------------------------- END