;=============================================================================
;
;   File surfmode.asm                       * next combined generation V3.09.5
;
;   Surface Mode
;
;   Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved.
;=============================================================================
; HISTORY
; 2011-08-07 : [mH] moving from OSTC code

#include "hwos.inc"					; mandatory header
#include "shared_definitions.h"		; mailbox from/to p2_deco.c
#include "start.inc"
#include "tft.inc"
#include "tft_outputs.inc"
#include "adc_lightsensor.inc"
#include "strings.inc"
#include "sleepmode.inc"
#include "wait.inc"
#include "customview.inc"
#include "divemode.inc"
#include "i2c.inc"
#include "comm.inc"
#include "colorschemes.inc"

 IFDEF _rx_functions
#include "rx_ops.inc"
 ENDIF

 IFDEF _external_sensor
#include "calibrate.inc"
 ENDIF


	extern	main_menu
	extern	check_cns_violation_now
	extern	check_battery
	extern	check_saturation
	extern	check_mbubbles


 IFDEF _compass
	extern	TFT_surface_compass_heading
 ENDIF


;---- Private local variables ------------------------------------------------

	CBLOCK	local1					; max size is 16 byte !!!
									; currently not used
	ENDC							; used: 0 byte, remaining: 16 byte


#DEFINE menu_pos_row		.215
#DEFINE menu_pos_column		.1
#DEFINE view_row			.215
#DEFINE view_column			.124

;=============================================================================
sfmode1		CODE
;=============================================================================

;-----------------------------------------------------------------------------
; Entry Point for Surface Mode
;
; called after restart via the battery selection, after compass calibration,
; and via ghostwriter at the end of a dive
;
	global	surfloop
surfloop:
	clrf	STKPTR						; clear return addresses stack
;	clrf	CCP1CON						; stop PWM
;	bcf		PORTC,2						; pull PWM output to GND
;	clrf	CCPR1L						; backlight off
	call	TFT_boot					; initialize TFT (includes clear screen)

	btfsc	restart_fast				; shall make a fast restart?
	bra		surfloop_1					; YES

	; show heinrichsweikamp logo
	WIN_TOP  .40
	WIN_LEFT .10
	TFT_WRITE_PROM_IMAGE_BY_ADDR hw_logo_block

	; set font color
	FONT_COLOR color_white

	; show textual OSTC logo
	WIN_STD .30,.90						; column, row
	STRCPY_PRINT "Open Source"			; show OSTC banner text, line 1
	WIN_STD .20,.130					; column, row
	STRCPY_PRINT "Tauch-Computer"		; show OSTC banner text, line 2

	; show firmware version
	WIN_SMALL .35,.180
	PUTC	"v"							; print "v"
	call	TFT_print_firmware			; print full firmware version (may change the font color)
	call	TFT_Display_FadeIn			; dim up the display

surfloop_1:

	;---- do all useful initializations that take time -----------------------

	; set deco mode flags
	call	restart_set_modes_and_flags

	bsf		trigger_pres_cur_changed	; set flag to have pressure    written to display on first round of surface loop
	bsf		trigger_temp_changed		; set flag to have temperature written to display on first round of surface loop

	call	I2C_sleep_compass			; shut down compass

 IFDEF _ccr_pscr
	movlw	surface_sp					; load default surface setpoint (in cbar)
	movff	WREG,char_I_const_ppO2		; store it as current setpoint
 ENDIF

 IFDEF _external_sensor
	call	transmit_setpoint			; transmit current setpoint (in cbar) via S8 digital interface (currently disabled)
 ENDIF

	bcf		surfmode_menu				; not in surface menu (any more)
	bcf		compass_menu				; not in "set bearing" selection (any more)

	bcf		switch_left					; clear intermediate button event since start/restart
	bcf		switch_right				; clear intermediate button event since start/restart

	btfsc	restart_fast				; shall make a fast restart?
	bra		surfloop_2					; YES

	call	deco_calc_desaturation_time	; calculate desaturation and no-fly/no-altitude time (C-code)
	banksel	common						; back to bank common

	WAITS	.2							; wait 2 seconds

	;---- fade to standard surface view --------------------------------------

	call	TFT_Display_FadeOut			; dim down display to black screen
	call	TFT_ClearScreen				; clear screen

surfloop_2:

	call	TFT_load_std_color_pallet	; load standard color pallet

	;---- button functionalities ---------------------------------------------

	FONT_COLOR			color_lightblue					; set font color
	WIN_SMALL			menu_pos_column,menu_pos_row	; set font size and output position
	STRCPY_TEXT_PRINT	tMenu							; print "<Menu"
	WIN_SMALL			view_column,view_row			; set font size and output position
	STRCPY_TEXT_PRINT	tView							; print "View>"


	;---- logo in upper right corner -----------------------------------------

	; show textual OSTC logo
	WIN_STD .100,.2						; set output position
	FONT_COLOR color_white				; set text color to white
	STRCPY_PRINT "OSTC"					; show "OSTC"

	FONT_COLOR color_cyan				; set text color to cyan
	WIN_TINY .138,.2					; set output position
	STRCPY_PRINT "hwOS"					; show "hwOS"
	WIN_TINY .137,.14					; set output position
 IFDEF _hwos_sport
	STRCPY_PRINT "sport"				; show "sport"
 ELSE
	STRCPY_PRINT "tech"					; show "tech"
 ENDIF

	; firmware version
	WIN_TINY .100,.32					; set output position
	FONT_COLOR color_white				; set text color to white
	call	TFT_print_firmware			; show firmware version (long format)


	;---- fill screen --------------------------------------------------------

	call	get_battery_voltage			; get battery voltage
	call	TFT_surfmode_batt			; show battery voltage
	call	TFT_surfmode_time			; show time
	call	TFT_surfmode_date			; show date
	call	TFT_surfmode_pres			; show surface pressure
	call	TFT_surfmode_temp			; show temperature
	call	TFT_surfmode_decotype		; show deco mode

	TSTOSS	opt_dive_mode				; in OC? (0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=pSCR)
	call	TFT_surfmode_startgas		; YES - show first gas and "OSTC2-like" active gases

	; configure tissue graphics
	bcf		tissue_graphic_mode			; select surface mode
	bsf		tissue_graphic_cns			; show CNS value

	bsf		tissue_graphic_layout		; default to N2+He
	TSTOSS	opt_tissue_graphics			; shall show press+sat?
	bcf		tissue_graphic_layout		; YES - show press+sat

	bcf		tissue_graphic_gf			; default to none-GF
	TSTOSC	char_I_model				; GF factors enabled?
	bsf		tissue_graphic_gf			; YES - show GF lines

	movff	customview_surfmode,active_customview	; reload last custom view
	call	surf_customview_mask					; redraw last custom view

	call	TFT_Display_FadeIn			; show resulting surface screen

 IFDEF _screendump
 extern	enable_rs232
	btfsc	screen_dump_avail			; screen dump function enabled?
	call	enable_rs232				; YES - activate RS232 (also sets CPU to normal speed)
 ENDIF

	bcf		restart_fast				; clear flag for fast restart
	bsf		imprint_surfmode_data		; start imprinting surface mode data

	bcf		switch_left					; clear pending left  button event
	bcf		switch_right				; clear pending right button event

	rcall	reset_timeout_surfmode		; reset timeout

surfloop_loop:
	call	TFT_debug_output			; optional debug output

	call	test_switches_surfmode		; check switches

	btfsc	request_next_custview		; shall show next custom view?
	call	surf_customview_toggle		; YES - show next custom view (and clear this flag)

	btfss	surfmode_menu				; shall enter surface menu?
	bra		surfloop_loop_1				; NO
	bcf		imprint_surfmode_data		; YES - stop imprinting surface mode data
	goto	main_menu					;     - goto surface menu

surfloop_loop_1:
	call	housekeeping				; handle data imprinting, screen dump request, timeout and entering dive mode
	bra		surfloop_loop				; loop in surface mode


;-----------------------------------------------------------------------------
; Surface Mode HMI Operations
;
test_switches_surfmode:					; check buttons in surface mode
	btfsc	switch_right				; right button pressed?
	bra		test_switches_surfmode2		; YES
	btfsc	switch_left					; left  button pressed?
	bra		test_switches_surfmode3		; YES
	return								; NO to both - done

test_switches_surfmode2:				; right button pressed
	bcf		switch_right				; clear button event
	rcall	reset_timeout_surfmode		; set up timeout
 IFDEF _compass
	movlw	.6							; coding for surface custom compass view
	cpfseq	active_customview			; in compass view?
	bra		test_switches_surfmode2a	; NO
	btfss	compass_menu				; "set course" selection shown?
	bra		test_switches_surfmode2a	; NO
	bsf		compass_bearing_set			; YES - set new course
	MOVII	compass_heading_shown,compass_bearing
	bra		test_switches_surfmode3b	;     - clear "Course" label and return
 ENDIF
test_switches_surfmode2a:
	bsf		request_next_custview		; request next custom view
	bcf		compass_menu				; "set course" selection not shown anymore
	return

test_switches_surfmode3:				; left button pressed
	bcf		switch_left					; clear button event
	rcall	reset_timeout_surfmode		; set up timeout
 IFDEF _compass
	movlw	.6							; coding for surface custom view compass
	cpfseq	active_customview			; in compass view?
	bra		test_switches_surfmode3a	; NO
	btfsc	compass_menu				; YES - "set course" selection already shown?
	bra		test_switches_surfmode3b	;       YES - remove it
	call	TFT_surf_cv_compass_bearing		;       NO  - show it
	return								;           - done
 ENDIF
test_switches_surfmode3a:
	bcf		compass_bearing_set			; clear course on entering menu
	bsf		surfmode_menu				; flag that the surface menu shall be entered
	return

 IFDEF _compass
test_switches_surfmode3b:
	WIN_BOX_BLACK .158,.190, .15, .99	; clear "Course" label (top, bottom, left, right)
	bcf		compass_menu				; clear flag for "set course" selection
	return
 ENDIF


;-----------------------------------------------------------------------------
; Helper Function - Reset and Restart Timeout for Surface Mode
;
	global	reset_timeout_surfmode
reset_timeout_surfmode:
	movlw	surfmode_timeout_default	; load default timeout value
	btfss	battery_is_36v				; running on a 3.6 V battery?
	movlw	surfmode_timeout_aa_15v		; NO  - replace by timeout for 1.5V battery
	btfsc	simulatormode				; currently in simulator (deco calculator) mode?
	movlw	surfmode_timeout_simulator	; YES - replace with simulator timeout
	;bra	restart_timeout_time		; restart timeout

	global	restart_timeout_time
restart_timeout_time:					; entry point with timeout value in WREG
	movwf	isr_timeout_reload			; copy WREG to isr_timeout_reload
	bsf		restart_timeout				; request ISR to restart the timeout
	bcf		trigger_timeout				; clear any pending timeout trigger
	return								; done


;=============================================================================
sfmode2		CODE
;=============================================================================

;-----------------------------------------------------------------------------
; Helper Function - Check all possible Surface Mode Warning Conditions
;
surfmode_check_warnings:
	clrf	message_counter				; clear message counter

	; warnings for all modes
	call	check_battery				; check if the battery level should be displayed/warned

	btfsc	FLAG_apnoe_mode				; done for Apnoe or Gauge mode
	bra		surfmode_check_warnings2
	btfsc	FLAG_gauge_mode				; done for Apnoe or Gauge mode
	bra		surfmode_check_warnings2

	; warnings only in deco modes
	call	check_saturation			; check/show tissue saturation
	call	check_cns_violation_now		; check/show current CNS value
	call	check_mbubbles				; check/show micro bubbles
	movff	int_O_lead_supersat+1,WREG	; get upper byte of leading tissue's supersaturation
	btfsc	WREG,int_warning_flag		; check if the warning flag is set
	bra		surfmode_check_warnings2	; YES - outside of the model
	rcall	surfmode_check_for_desat	; NO  - check/show desaturation time
	rcall	surfmode_check_for_nofly	;     - check/show no-fly       time

surfmode_check_warnings2:
	; setup message page number
	incf	message_page,F				; increment page number
	bcf		STATUS,C					; clear carry bit
	rlcf	message_page,W				; each page can take two messages
	cpfsgt	message_counter				; number of actual messages > message capacity ?
	clrf	message_page				; NO - all messages could be shown, restart from first page next time

	; clear both rows if there is nothing to show at all
	tstfsz	message_counter				; any message to show?
	bra		surfmode_check_warnings3	; YES - look if second row needs to be cleared
	goto	TFT_clear_message_window	; NO  - clear complete message area and return

surfmode_check_warnings3:
	; clear 2nd row of messages if there is nothing to show (on this page)
	btfss	message_2nd_row_used			; does the 2nd row contain a message?
	goto	TFT_clear_message_window_row2	; NO  - clear the 2nd row and return
	return									; YES - done


;-----------------------------------------------------------------------------
; Helper Function - check if still in Desaturation, if yes show a Message
;
surfmode_check_for_desat:
	banksel	int_O_desaturation_time
	movf	int_O_desaturation_time+0,W
	iorwf	int_O_desaturation_time+1,W
	banksel	common						; back to bank common
	bnz		surfmode_check_for_desat_1	; is the desat-time > 0 ?
	return								; NO  - done
surfmode_check_for_desat_1:
	incf	message_counter,F			; YES - increase counter
	call	TFT_surf_mesg_desat		;     - show desaturation time
	return								;     - done


;-----------------------------------------------------------------------------
; Helper Function - check if still in no-fly, if yes show a Message
;
surfmode_check_for_nofly:
	banksel	int_O_nofly_time
	movf	int_O_nofly_time+0,W
	iorwf	int_O_nofly_time+1,W
	banksel	common						; back to bank common
	bnz		surfmode_check_for_nofly_1	; is the nofly-time > 0 ?
	return								; NO  - done
surfmode_check_for_nofly_1:
	incf	message_counter,F			; YES - increase counter
	call	TFT_surf_mesg_nofly				;     - show nofly-time
	return								;     - done


;=============================================================================
sfmode3		CODE
;=============================================================================

;-----------------------------------------------------------------------------
; Data Imprinting, Screen Dump request, Timeout and Entering Dive Mode
;
	global	housekeeping
housekeeping:
	btfss	trigger_full_second			; new 1/1 second begun?
	bra		housekeeping_1				; NO

	;---- tasks any new second ---------

	bcf		trigger_full_second			; YES - clear flag
	call	get_battery_voltage			;     - get battery voltage

	btfsc	imprint_time_date			;     - shall imprint the current time & date?
	call	TFT_imprint_time_date		;       YES - imprint time and date on display (copies running time to latch registers)

	btfsc	imprint_color_schemes		;     - shall imprint color scheme demo?
	call	TFT_imprint_color_schemes	;       YES - update the color schemes

 IFDEF _rx_functions
	btfsc	tr_functions_activated		;     - TR functions activated?
	call	I2C_get_tankdata			;       YES - get new transmitter data

	btfsc	imprint_xmitter_pres		;     - shall imprint transmitter ID and pressure?
	call	TFT_imprint_tank_pres		;       YES - imprint transmitter ID and pressure
 ENDIF

	btfss	imprint_surfmode_data		;     - shall imprint all surface mode data?
	bra		housekeeping_0				;       NO
	call	TFT_surfmode_time			;       YES - update displayed time
	call	TFT_surfmode_batt			;           - update displayed battery voltage
	btfss	timebase_1sec,0				;           - on even second?
	call	surfmode_check_warnings		;             YES - check for warnings and display/update them

 IFDEF _rx_functions
	btfss	tr_functions_activated		;           - TR functions activated?
	bra		housekeeping_0				;             NO  - skip tank pressure part

	call	get_pressure_readings		;             YES - get pressure readings
	call	TFT_surfmode_tankpres		;                 - update first gas/diluent pressure

	movf	active_customview,W			;                 - get current custom view
	xorlw	.10							;                 - coding of tank data custom view
	btfsc	STATUS,Z					;                 - equal?
	call	TFT_surf_cv_tankdata		;                   YES - update tank data custom view
 ENDIF

housekeeping_0:
	bsf		restart_fast				; default to doing a fast restart (no logos)
	call	check_dive_modes_surf		; check if dive mode needs to be entered, will set dive mode flag if yes
	btfsc	simulatormode				; in simulator mode?
	bra		housekeeping_1				; YES - can't restart or go to sleep without prior cleanup
	btfsc	divemode					; NO  - need to enter dive mode?
	goto	restart						;       YES - restart, will proceed to dive mode
	btfss	trigger_timeout				;       NO  - timeout?
	bra		housekeeping_1				;             NO
	btfsc	surfmode_menu				;             YES - in surface menus?
	goto	restart						;                   YES - goto restart, will proceed to surface mode
	bcf		restart_fast				;                   NO  - set next restart to be done slow, i.e. with logos
	goto	sleeploop					;                       - goto sleep mode

housekeeping_1:
	btfss	trigger_quarter_second		; new 1/4 second begun?
	bra		housekeeping_2				; NO

	;---- tasks any new 1/4 second -----

	bcf		trigger_quarter_second		; YES - clear flag
 IFDEF _external_sensor
	btfsc	imprint_sensor_mv			;     - shall imprint sensor mV data?
	call	TFT_imprint_menu_mV			;       YES - imprint sensor mV data
 ENDIF	; _external_sensor
	btfss	imprint_surfmode_data		;     - shall imprint all surface mode data?
	bra		housekeeping_2				;       NO
	btfsc	trigger_pres_cur_changed	;       YES - pressure changed?
	call	TFT_surfmode_pres_fast		;             YES - display surface pressure, but only if change > threshold
	bcf		trigger_pres_cur_changed	;           - clear flag (anyhow)
 IFDEF _compass
	movf	active_customview,W			;           - get current custom view
	xorlw	.6							;           - coding of compass custom view
	btfsc	STATUS,Z					;           - equal?
	call	TFT_surface_compass_heading	;             YES - update compass view
 ENDIF	; _compass
 IFDEF _external_sensor
	btfsc	FLAG_ccr_mode				;           - in CCR mode?
	bra		housekeeping_1a				;           - YES - handle sensors
	btfsc	FLAG_pscr_mode				;           - in pSCR mode?
	bra		housekeeping_1a				;             YES - handle sensors
	bra		housekeeping_2				;             NO to both

housekeeping_1a:						; handle sensors
	movff	opt_ccr_mode,WREG			; =0: fixed SP, =1: sensor, =2: autoSP
	decfsz	WREG						; opt_ccr_mode = 1 (sensor)?
	bra		housekeeping_2				; NO  - skip sensor readings
	call	calc_deko_divemode_sensor	; YES - read & calculate sensor data
	call	TFT_imprint_surf_ppO2		;     - update displayed sensor data
	call	TFT_imprint_surf_sensor_eol	;     - show a down-arrow behind sensor readings when sensor is at end-of-life
	movf	active_customview,W			;     - get current custom view
	xorlw	.9							;     - coding of sensor mV readings custom view
	btfsc	STATUS,Z					;     - equal?
	call	TFT_imprint_surf_mV			;       YES - update mV readings
 ENDIF	; _external_sensor

housekeeping_2:
	btfss	trigger_full_minute			; new 1/1 minute begun?
	bra		housekeeping_3				; NO

	;---- tasks any new minute ---------

	bcf		trigger_full_minute			; YES - clear flag

	btfss	imprint_surfmode_data		;     - shall imprint all surface mode data?
	bra		housekeeping_2a				;       NO
	btfsc	trigger_pres_cur_changed	;       YES - pressure changed?
	call	TFT_surfmode_pres			;             YES - display surface pressure
	bcf		trigger_pres_cur_changed	;           - clear flag (anyhow)

housekeeping_2a:
	btfsc	simulatormode				;     - in simulator mode?
	bra		housekeeping_2b				;       YES - real tissues are in the vault, skip desaturation calculations
	call	deco_calc_dive_interval_1min;       NO  - calculate 1 minute at surface conditions (C-code)
	call	deco_calc_desaturation_time	;           - calculate desaturation and no-fly/no-altitude time (C-code)
	banksel	common						;           - back to bank common

housekeeping_2b:
	btfss	imprint_surfmode_data		;     - shall imprint all surface mode data?
	bra		housekeeping_3				;       NO
	call	TFT_surfmode_date			;       YES - update displayed date

	btfsc	trigger_temp_changed		;           - temperature changed?
	call	TFT_surfmode_temp			;             YES - display temperature
	bcf		trigger_temp_changed		;           - clear flag (anyhow)

	movf	active_customview,W			;           - get current custom view
	xorlw	.5							;           - coding of tissue custom view
	btfsc	STATUS,Z					;           - equal?
	call	TFT_surf_cv_tissues			;             YES - update tissue diagram

	movf	active_customview,W			;           - get current custom view
	xorlw	.8							;           - coding of last dive info custom view
	btfsc	STATUS,Z					;           - equal?
	call	TFT_surf_cv_lastdive		;             YES - update last dive infos

housekeeping_3:

	;---- tasks any round --------------

 IFDEF _screendump
	btfsc	screen_dump_avail			; screen dump function enabled?
	call	TFT_dump_screen_check		; YES - check if requested and do it
 ELSE
	btfsc	comm_mode_disabled			; COMM mode disabled?
	return								; YES - done
 ENDIF
	btfss	surfmode_menu				; in surface menus?
	return								; NO  - done

	btfsc	simulatormode				; currently in simulator (deco calculator) mode?
	return								; YES - suppress COMM mode to not jeopardize backup/restore of tissue data

	btfss	vusb_in						; USB plugged in?
	return								; NO  - done
 IFDEF _screendump
	btfsc	screen_dump_avail			; YES - screen dump enabled?
	return								;       YES - no COMM mode to be able to make screen shots of the menu and simulator mode
 ENDIF
	btfss	ble_available				; skip "USB" check in all Bluetooth models (required for very old OSTC sport)
	goto	comm_mode_usb				; YES / NO  - proceed to COMM mode, will also set CPU to speed normal
	return

;-----------------------------------------------------------------------------

	END